Skip to contentSkip to conversation

3.10: NCT6776F sensor question with Supermicro X9SRL-F motherboard

DISCUSSION Justin Piszcz 3 participants 13 messages Jul 3, 2013 – Jul 11, 2013

lore
Share & tools
lore
#0 lore raw

Hello,

Currently running 3.10 with:
CONFIG_SENSORS_NCT6775=y

Motherboard: Supermicro X9SRL-F

A couple questions:
1) Was curious if the PCH CHIP/CPU/MCH temperatures should be populated for this board?
2) Additionally, why is the CPUTIN in alarm?

I also found:
http://www.lm-sensors.org/wiki/Configurations/SuperMicro/X9SRA

Does Super Micro also have such a config file for the X9SRL-F? This board uses a NCT6776F.

Relevant output from lm_sensors 3.6.0+dfsg1-1:

nct6776-isa-0a30

Adapter: ISA adapter
Vcore:          +0.81 V  (min =  +0.54 V, max =  +1.49 V)
in1:            +1.85 V  (min =  +1.62 V, max =  +1.99 V)
AVCC:           +3.30 V  (min =  +2.98 V, max =  +3.63 V)
+3.3V:          +3.30 V  (min =  +2.98 V, max =  +3.63 V)
in4:            +1.51 V  (min =  +1.35 V, max =  +1.65 V)
in5:            +1.27 V  (min =  +1.13 V, max =  +1.38 V)
in6:            +1.06 V  (min =  +0.92 V, max =  +1.34 V)
3VSB:           +3.57 V  (min =  +2.98 V, max =  +3.63 V)
Vbat:           +3.49 V  (min =  +2.70 V, max =  +3.63 V)
fan1:           986 RPM  (min =  700 RPM)
fan2:          1322 RPM  (min =  700 RPM)
fan3:          1103 RPM  (min =  700 RPM)
fan4:          1080 RPM  (min =  700 RPM)
fan5:          1001 RPM  (min =  700 RPM)
SYSTIN:         +42.0 C  (high = +75.0 C, hyst = +70.0 C)  sensor thermistor
CPUTIN:         +33.0 C  (high = +95.0 C, hyst = +92.0 C)  ALARM  sensor thermistor
AUXTIN:         +23.0 C  (high = +80.0 C, hyst = +75.0 C)  sensor thermistor
PECI Agent 0:    +0.0 C  (high = +95.0 C, hyst = +92.0 C)
                         (crit = +100.0 C)
PCH_CHIP_TEMP:   +0.0 C  
PCH_CPU_TEMP:    +0.0 C  
PCH_MCH_TEMP:    +0.0 C  
intrusion0:    ALARM
intrusion1:    ALARM

sensors3.conf snippet:

chip "w83627ehf-*" "w83627dhg-*" "w83667hg-*" "nct6775-*" "nct6776-*"

    label in0 "Vcore"
    label in2 "AVCC"
    label in3 "+3.3V"
    label in7 "3VSB"
    label in8 "Vbat"

    set in2_min  3.3 * 0.90
    set in2_max  3.3 * 1.10
    set in3_min  3.3 * 0.90
    set in3_max  3.3 * 1.10
    set in7_min  3.3 * 0.90
    set in7_max  3.3 * 1.10
    set in8_min  3.0 * 0.90
    set in8_max  3.3 * 1.10

Justin.

_______________________________________________
lm-sensors mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors

#1 lore raw
Quoted 10 lines · Justin Piszcz

Hello,

Currently running 3.10 with:
CONFIG_SENSORS_NCT6775=y

Motherboard: Supermicro X9SRL-F

A couple questions:
1) Was curious if the PCH CHIP/CPU/MCH temperatures should be populated for this board?

No, but the driver doesn't know, so you'll have to create an ignore entry in sensors3.conf.

Quoted 2 lines

2) Additionally, why is the CPUTIN in alarm?

Because of a bug in the driver. Should get fixed with 3.10.1 or 3.10.2.

Quoted 6 lines

I also found:
http://www.lm-sensors.org/wiki/Configurations/SuperMicro/X9SRA

Does Super Micro also have such a config file for the X9SRL-F? This board uses a NCT6776F.

Supermicro does not provide configuration files. You can take the above file, test and update it, and let us know so we can add it to the wiki.

Quoted 15 lines

Relevant output from lm_sensors 3.6.0+dfsg1-1:

nct6776-isa-0a30

Adapter: ISA adapter
Vcore:          +0.81 V  (min =  +0.54 V, max =  +1.49 V)
in1:            +1.85 V  (min =  +1.62 V, max =  +1.99 V)
AVCC:           +3.30 V  (min =  +2.98 V, max =  +3.63 V)
+3.3V:          +3.30 V  (min =  +2.98 V, max =  +3.63 V)
in4:            +1.51 V  (min =  +1.35 V, max =  +1.65 V)
in5:            +1.27 V  (min =  +1.13 V, max =  +1.38 V)
in6:            +1.06 V  (min =  +0.92 V, max =  +1.34 V)
3VSB:           +3.57 V  (min =  +2.98 V, max =  +3.63 V)
Vbat:           +3.49 V  (min =  +2.70 V, max =  +3.63 V)
fan1:           986 RPM  (min =  700 RPM)
fan2:          1322 RPM  (min =  700 RPM)
Quoted 8 lines
fan3:          1103 RPM  (min =  700 RPM)
fan4:          1080 RPM  (min =  700 RPM)
fan5:          1001 RPM  (min =  700 RPM)
SYSTIN:         +42.0 C  (high = +75.0 C, hyst = +70.0 C)  sensor > thermistor
CPUTIN:         +33.0 C  (high = +95.0 C, hyst = +92.0 C)  ALARM  sensor > thermistor
AUXTIN:         +23.0 C  (high = +80.0 C, hyst = +75.0 C)  sensor > thermistor
PECI Agent 0:    +0.0 C  (high = +95.0 C, hyst = +92.0 C)
                         (crit = +100.0 C)

This is surprising and might be where the alarm comes from. What output do you get if you load the coretemp driver ?

Quoted 5 lines
PCH_CHIP_TEMP:   +0.0 C  
PCH_CPU_TEMP:    +0.0 C  
PCH_MCH_TEMP:    +0.0 C  
intrusion0:    ALARM
intrusion1:    ALARM

Are those not connected ?

Quoted 5 lines

sensors3.conf snippet:

chip "w83627ehf-*" "w83627dhg-*" "w83667hg-*" "nct6775-*" "nct6776-*"

Quoted 15 lines
    label in0 "Vcore"
    label in2 "AVCC"
    label in3 "+3.3V"
    label in7 "3VSB"
    label in8 "Vbat"

    set in2_min  3.3 * 0.90
    set in2_max  3.3 * 1.10
    set in3_min  3.3 * 0.90
    set in3_max  3.3 * 1.10
    set in7_min  3.3 * 0.90
    set in7_max  3.3 * 1.10
    set in8_min  3.0 * 0.90
    set in8_max  3.3 * 1.10

Supermicro tends to set the limits in the BIOS, so you should not have to do that.

Thanks,
Guenter

_______________________________________________
lm-sensors mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors

#2 lore raw

-----Original Message-----
From: Guenter Roeck [mailto:[email protected]]
Sent: Wednesday, July 03, 2013 10:42 AM
To: Justin Piszcz
Cc: [email protected]; [email protected]
Subject: Re: [lm-sensors] 3.10: NCT6776F sensor question with Supermicro X9SRL-F motherboard

[ .. ]

This is surprising and might be where the alarm comes from. What output do you
get if you load the coretemp driver ?

coretemp-isa-0000

Adapter: ISA adapter
Physical id 0:  +38.0 C  (high = +81.0 C, crit = +91.0 C)
Core 0:         +36.0 C  (high = +81.0 C, crit = +91.0 C)
Core 1:         +35.0 C  (high = +81.0 C, crit = +91.0 C)
Core 2:         +35.0 C  (high = +81.0 C, crit = +91.0 C)
Core 3:         +34.0 C  (high = +81.0 C, crit = +91.0 C)
Core 4:         +37.0 C  (high = +81.0 C, crit = +91.0 C)
Core 5:         +38.0 C  (high = +81.0 C, crit = +91.0 C)
Quoted 5 lines
PCH_CHIP_TEMP:   +0.0 C  
PCH_CPU_TEMP:    +0.0 C  
PCH_MCH_TEMP:    +0.0 C  
intrusion0:    ALARM
intrusion1:    ALARM

Are those not connected ?

The intrusion headers are not connected, also, I have not dug into it but when you try to ignore the PECI or those PCH* lm_sensors seems to ignore the rule.

sensors3.conf:
ignore PCH_CHIP_TEMP
ignore PCH_CPU_TEMP
ignore PCH_MCH_TEMP

$ sensors  |tail -n 4
PCH_CHIP_TEMP:   +0.0 C
PCH_CPU_TEMP:    +0.0 C
PCH_MCH_TEMP:    +0.0 C

Ignoring intrusion works though:
ignore intrusion0
ignore intrusion1

nct6776-isa-0a30

Adapter: ISA adapter
Vcore:          +0.84 V  (min =  +0.54 V, max =  +1.49 V)
in1:            +1.84 V  (min =  +1.62 V, max =  +1.99 V)
AVCC:           +3.28 V  (min =  +2.98 V, max =  +3.63 V)
+3.3V:          +3.28 V  (min =  +2.98 V, max =  +3.63 V)
in4:            +1.50 V  (min =  +1.35 V, max =  +1.65 V)
in5:            +1.26 V  (min =  +1.13 V, max =  +1.38 V)
in6:            +1.06 V  (min =  +0.92 V, max =  +1.34 V)
3VSB:           +3.57 V  (min =  +2.98 V, max =  +3.63 V)
Vbat:           +3.47 V  (min =  +2.70 V, max =  +3.63 V)
fan1:          1007 RPM  (min =  700 RPM)
fan2:          1317 RPM  (min =  700 RPM)
fan3:          1102 RPM  (min =  700 RPM)
fan4:          1059 RPM  (min =  700 RPM)
fan5:           998 RPM  (min =  700 RPM)
SYSTIN:         +40.0 C  (high = +75.0 C, hyst = +70.0 C)  sensor thermistor
CPUTIN:         +31.5 C  (high = +95.0 C, hyst = +92.0 C)  ALARM  sensor thermistor
AUXTIN:         +23.0 C  (high = +80.0 C, hyst = +75.0 C)  sensor thermistor
PECI Agent 0:    +0.0 C  (high = +95.0 C, hyst = +92.0 C)
                         (crit = +100.0 C)
PCH_CHIP_TEMP:   +0.0 C
PCH_CPU_TEMP:    +0.0 C
PCH_MCH_TEMP:    +0.0 C

Thanks,
Guenter

_______________________________________________
lm-sensors mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors

#3 lore raw
Quoted 17 lines · Justin Piszcz

-----Original Message-----
From: Guenter Roeck [mailto:[email protected]]
Sent: Wednesday, July 03, 2013 10:42 AM
To: Justin Piszcz
Cc: [email protected]; [email protected]
Subject: Re: [lm-sensors] 3.10: NCT6776F sensor question with Supermicro X9SRL-F motherboard

[ .. ]

This is surprising and might be where the alarm comes from. What output do you
get if you load the coretemp driver ?

coretemp-isa-0000

Quoted 9 lines
Adapter: ISA adapter
Physical id 0:  +38.0 C  (high = +81.0 C, crit = +91.0 C)
Core 0:         +36.0 C  (high = +81.0 C, crit = +91.0 C)
Core 1:         +35.0 C  (high = +81.0 C, crit = +91.0 C)
Core 2:         +35.0 C  (high = +81.0 C, crit = +91.0 C)
Core 3:         +34.0 C  (high = +81.0 C, crit = +91.0 C)
Core 4:         +37.0 C  (high = +81.0 C, crit = +91.0 C)
Core 5:         +38.0 C  (high = +81.0 C, crit = +91.0 C)

Can you install superiotool and run "sudo superiotool -V -e" ? I would like to see raw data from the superio chip.

Quoted 8 lines
Quoted 5 lines
PCH_CHIP_TEMP:   +0.0 C  
PCH_CPU_TEMP:    +0.0 C  
PCH_MCH_TEMP:    +0.0 C  
intrusion0:    ALARM
intrusion1:    ALARM

Are those not connected ?

Quoted 9 lines

The intrusion headers are not connected, also, I have not dug into it but when you try to ignore the PECI or those PCH* lm_sensors seems to ignore the rule.

sensors3.conf:
ignore PCH_CHIP_TEMP
ignore PCH_CPU_TEMP
ignore PCH_MCH_TEMP

You have to specify the raw attribute names, not the symbolic ones. You see the raw attribute names with "sensors -u".

Quoted 9 lines
$ sensors  |tail -n 4
PCH_CHIP_TEMP:   +0.0 C
PCH_CPU_TEMP:    +0.0 C
PCH_MCH_TEMP:    +0.0 C

Ignoring intrusion works though:
ignore intrusion0
ignore intrusion1

Does the board have intrusion detection headers ? If so, you could close (bridge) the header(s) which should get rid of the alarm.

Thanks,
Guenter

_______________________________________________
lm-sensors mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors

#4 lore raw

-----Original Message-----
From: Guenter Roeck [mailto:[email protected]]
Sent: Wednesday, July 03, 2013 12:33 PM
To: Justin Piszcz
Cc: [email protected]; [email protected]
Subject: Re: [lm-sensors] 3.10: NCT6776F sensor question with Supermicro X9SRL-F motherboard

[ .. ]

Quoted 1 line

Can you install superiotool and run "sudo superiotool -V -e" ? I would like to see raw data from the superio chip.

# superiotool -V -e
superiotool r6637
..
Probing for Nuvoton Super I/O (sid=0xfc) at 0x164e...
Found Nuvoton WPCM450 (id=0x1a11, rev=0x00) at 0x164e
Probing for Nuvoton Super I/O at 0x2e...
Found Nuvoton NCT6776F (C) (id=0xc333) at 0x2e

[ .. ]

You have to specify the raw attribute names, not the symbolic ones. You see the raw attribute names with "sensors -u".

# sensors -u
PCH_CHIP_TEMP:
  temp8_input: 0.000
PCH_CPU_TEMP:
  temp9_input: 0.000
PCH_MCH_TEMP:
  temp10_input: 0.000

Tried:
ignore PCH_CHIP_TEMP
ignore temp8_input

For some reason still can't get rid of it appearing:
PCH_CHIP_TEMP: +0.0 C
(..as well as the others)

Quoted 9 lines
$ sensors  |tail -n 4
PCH_CHIP_TEMP:   +0.0 C
PCH_CPU_TEMP:    +0.0 C
PCH_MCH_TEMP:    +0.0 C

Ignoring intrusion works though:
ignore intrusion0
ignore intrusion1

Does the board have intrusion detection headers ? If so, you could close (bridge) the header(s) which should get rid of the alarm.

ftp://ftp.supermicro.com/CDR-X9-UP_1.21_for_Intel_X9_UP_platform/MANUALS/X9S RL-F/X9SRL-F.pdf
@ page 49 (2-23) [motherboard: JL1 2-pin header]

-

_______________________________________________
lm-sensors mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors

#5 lore raw
Quoted 15 lines · Justin Piszcz

-----Original Message-----
From: Guenter Roeck [mailto:[email protected]]
Sent: Wednesday, July 03, 2013 12:33 PM
To: Justin Piszcz
Cc: [email protected]; [email protected]
Subject: Re: [lm-sensors] 3.10: NCT6776F sensor question with Supermicro X9SRL-F motherboard

[ .. ]

Quoted 1 line

Can you install superiotool and run "sudo superiotool -V -e" ? I would like to see raw data from the superio chip.

Quoted 8 lines
# superiotool -V -e
superiotool r6637
..
Probing for Nuvoton Super I/O (sid=0xfc) at 0x164e...
Found Nuvoton WPCM450 (id=0x1a11, rev=0x00) at 0x164e
Probing for Nuvoton Super I/O at 0x2e...
Found Nuvoton NCT6776F (C) (id=0xc333) at 0x2e

Version is too old :(.

Can you try http://roeck-us.net/linux/bin/superiotool ?

Quoted 13 lines

[ .. ]

You have to specify the raw attribute names, not the symbolic ones. You see the raw attribute names with "sensors -u".

# sensors -u
PCH_CHIP_TEMP:
  temp8_input: 0.000
PCH_CPU_TEMP:
  temp9_input: 0.000
PCH_MCH_TEMP:
  temp10_input: 0.000
Quoted 8 lines

Tried:
ignore PCH_CHIP_TEMP
ignore temp8_input

For some reason still can't get rid of it appearing:
PCH_CHIP_TEMP: +0.0 C
(..as well as the others)

It has to be
ignore temp8
ignore temp9
ignore temp10

Thanks,
Guenter

_______________________________________________
lm-sensors mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors

#6 lore raw

-----Original Message-----
From: Guenter Roeck [mailto:[email protected]]
Sent: Wednesday, July 03, 2013 1:17 PM
To: Justin Piszcz
Cc: [email protected]; [email protected]
Subject: Re: [lm-sensors] 3.10: NCT6776F sensor question with Supermicro X9SRL-F motherboard

[ .. ]

Can you try http://roeck-us.net/linux/bin/superiotool ?

Sure, below:

$ sudo ./superiotool 
superiotool r4.0-2514-gf419483
Found Nuvoton WPCM450 (id=0x1a11, rev=0x00) at 0x164e
Found Nuvoton NCT6776F (C) (id=0xc333) at 0x2e
$ sudo ./superiotool -V -e
Probing for Nuvoton Super I/O (sid=0xfc) at 0x164e...
Found Nuvoton WPCM450 (id=0x1a11, rev=0x00) at 0x164e
Probing for Nuvoton Super I/O at 0x2e...
Found Nuvoton NCT6776F (C) (id=0xc333) at 0x2e
Bank 0:
    00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f 
00: 03 33 03 33 00 ff ff ff ff ff ff ff ff ff ff ff 
01: 04 ff 00 00 00 00 ff ff 00 00 00 00 00 83 00 00 
02: 69 e6 ce ce bc 9e 84 2b ff ff ff ba 43 f9 cb e3 
03: ba e3 ba ce a9 ac 8d a8 73 4b 46 ff ff ff ff ff 
04: 03 fe 58 ff ff 80 3f ff 2d ff ff ff 10 05 00 a3 
05: ff ff ff ff ff ff ff ff c1 ff ff ff ff 01 00 ff 
06: 00 ff ff ff ff 01 07 ff ff ff ff ff ff ff ff ff 
07: 00 0a 00 21 00 00 00 17 00 ff ff ff ff ff ff ff 
08: ff 03 1f 0f ff 3c 3c 3c 00 00 00 00 00 00 00 00 
09: 0a 00 00 00 00 0a 0a 0a 0a aa ef 80 ff 40 46 c4 
0a: 0e 01 00 00 ff 00 00 ff 00 00 80 66 66 06 01 01 
0b: 00 00 00 00 02 01 35 00 1c 00 00 04 38 c0 c4 ff 
0c: 01 00 00 00 00 00 00 00 00 07 02 ff ff ff ff ff 
0d: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
0e: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
0f: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
Bank 1:
    00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f 
00: 82 00 00 01 01 28 01 3c ff 33 ff ff 00 ff ff ff 
01: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
02: 01 23 28 37 37 ff ff 28 51 ff ff ff ff ff ff ff 
03: ff 00 ff ff 00 55 ff ff 05 01 00 00 00 00 00 00 
04: ff ff ff ff ff d9 03 ff ff ff ff ff ff ff 01 ff 
05: 00 00 00 5c 00 5f 00 ff ff ff ff ff ff ff ff ff 
06: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
07: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
08: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
09: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
0a: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
0b: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
0c: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
0d: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
0e: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
0f: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
Bank 2:
    00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f 
00: 8c 32 00 01 01 33 01 3c ff 33 ff ff 00 ff ff ff 
01: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
02: 01 32 5a 5a 5a ff ff 33 ff ff ff ff ff ff ff ff 
03: ff 00 ff ff 00 5f ff ff 03 01 00 00 00 00 00 00 
04: ff ff ff ff ff 2c 05 ff ff ff ff ff ff ff 02 ff 
05: 21 00 00 5c 00 5f 00 ff ff ff ff ff ff ff ff ff 
06: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
07: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
08: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
09: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
0a: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
0b: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
0c: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
0d: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
0e: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
0f: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
Bank 3:
    00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f 
00: 03 00 00 0a 0a 01 01 3c ff ff ff ff 00 ff ff ff 
01: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
02: 00 19 23 2d 37 ff ff 8c aa c8 e6 ff ff ff ff ff 
03: ff 00 ff ff 00 3c ff ff 00 01 00 00 00 00 00 00 
04: ff ff ff ff ff 48 04 ff ff ff ff ff ff ff 03 ff 
05: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
06: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
07: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
08: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
09: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
0a: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
0b: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
0c: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
0d: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
0e: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
0f: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
Bank 4:
    00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f 
00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
01: 00 00 00 00 00 00 00 00 00 00 00 ff ff ff ff ff 
02: ff ff ff 96 64 96 64 e1 96 ff ff ff ff ff ff ff 
03: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
04: 3f 00 03 ff ff ff ff ff ff ff ff ff ff ff 04 ff 
05: 31 13 ff ff 00 00 00 ff 00 20 12 00 09 ff ff ff 
06: ff 01 00 00 00 00 00 00 ff ff ff ff ff ff ff ff 
07: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
08: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
09: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
0a: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
0b: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
0c: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
0d: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
0e: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
0f: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
Bank 5:
    00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f 
00: ff ff 00 00 00 00 ff ff ff ff ff ff ff 00 00 ff 
01: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
02: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
03: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
04: ff ff ff ff ff ff ff ff ff ff ff ff ff ff 05 ff 
05: df d9 c0 ff e3 ba e3 a9 ff ff ff ff ff ff ff ff 
06: 00 00 00 00 00 00 07 01 01 ff ff ff ff ff ff ff 
07: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
08: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
09: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
0a: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
0b: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
0c: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
0d: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
0e: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
0f: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
Bank 6:
    00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f 
00: 00 00 ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
01: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
02: ff 01 0c 02 03 01 01 ff 00 00 00 17 2b 2b 00 ff 
03: 2a 1a 1f 1c 26 0f 26 1f 2a 04 3c 06 3c 06 3c 06 
04: 3c 06 3c 06 02 02 02 ff ff ff ff ff ff ff 06 ff 
05: 7f 7f 7f 7f 7f 7f 03 d9 05 2b 04 48 04 3a 03 e9 
06: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
07: 7f 7f 50 4b 04 7f 7f 50 4b 04 7f 7f 50 4b 04 ff 
08: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
09: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
0a: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
0b: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
0c: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
0d: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
0e: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
0f: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
Bank 7:
    00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f 
00: ff 95 02 10 00 00 00 00 00 64 00 00 00 00 00 00 
01: 00 00 00 00 00 00 00 f8 80 f8 80 f8 80 f8 80 00 
02: 28 00 06 00 00 09 00 00 00 ef 00 00 00 00 00 00 
03: 00 00 00 ff ff ff ff ff ff ff ff ff ff ff ff ff 
04: ff ff ff ff ff ff ff ff ff ff ff ff ff ff 07 ff 
05: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
06: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
07: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
08: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
09: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
0a: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
0b: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
0c: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
0d: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
0e: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
0f: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 
Probing for Nuvoton Super I/O at 0x4e...
  Failed. Returned data: chip_id=0xffff
Probing for Nuvoton Super I/O (sid=0xfc) at 0x4e...
Quoted 5 lines

[ .. ]

You have to specify the raw attribute names, not the symbolic ones. You see the raw attribute names with "sensors -u".

It has to be
ignore temp8
ignore temp9
ignore temp10

Woohoo! Thank you.

nct6776-isa-0a30

Adapter: ISA adapter
Vcore:        +0.83 V  (min =  +0.54 V, max =  +1.49 V)
in1:          +1.85 V  (min =  +1.62 V, max =  +1.99 V)
AVCC:         +3.30 V  (min =  +2.98 V, max =  +3.63 V)
+3.3V:        +3.28 V  (min =  +2.98 V, max =  +3.63 V)
in4:          +1.50 V  (min =  +1.35 V, max =  +1.65 V)
in5:          +1.26 V  (min =  +1.13 V, max =  +1.38 V)
in6:          +1.06 V  (min =  +0.92 V, max =  +1.34 V)
3VSB:         +3.57 V  (min =  +2.98 V, max =  +3.63 V)
Vbat:         +3.47 V  (min =  +2.70 V, max =  +3.63 V)
fan1:        1010 RPM  (min =  700 RPM)
fan2:        1324 RPM  (min =  700 RPM)
fan3:        1102 RPM  (min =  700 RPM)
fan4:        1062 RPM  (min =  700 RPM)
fan5:         991 RPM  (min =  700 RPM)
SYSTIN:       +43.0 C  (high = +75.0 C, hyst = +70.0 C)  sensor = thermistor
CPUTIN:       +33.0 C  (high = +95.0 C, hyst = +92.0 C)  ALARM  sensor thermistor
AUXTIN:       +23.0 C  (high = +80.0 C, hyst = +75.0 C)  sensor = thermistor

Justin.

_______________________________________________
lm-sensors mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors

#7 lore raw
Quoted 30 lines · Justin Piszcz

-----Original Message-----
From: Guenter Roeck [mailto:[email protected]]
Sent: Wednesday, July 03, 2013 1:17 PM
To: Justin Piszcz
Cc: [email protected]; [email protected]
Subject: Re: [lm-sensors] 3.10: NCT6776F sensor question with Supermicro X9SRL-F motherboard

[ .. ]

Can you try http://roeck-us.net/linux/bin/superiotool ?

Sure, below:

$ sudo ./superiotool 
superiotool r4.0-2514-gf419483
Found Nuvoton WPCM450 (id=0x1a11, rev=0x00) at 0x164e
Found Nuvoton NCT6776F (C) (id=0xc333) at 0x2e
$ sudo ./superiotool -V -e
Probing for Nuvoton Super I/O (sid=0xfc) at 0x164e...
Found Nuvoton WPCM450 (id=0x1a11, rev=0x00) at 0x164e
Probing for Nuvoton Super I/O at 0x2e...
Found Nuvoton NCT6776F (C) (id=0xc333) at 0x2e
Bank 0:
    00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f 
00: 03 33 03 33 00 ff ff ff ff ff ff ff ff ff ff ff 
01: 04 ff 00 00 00 00 ff ff 00 00 00 00 00 83 00 00 
02: 69 e6 ce ce bc 9e 84 2b ff ff ff ba 43 f9 cb e3 
Quoted 8 lines
03: ba e3 ba ce a9 ac 8d a8 73 4b 46 ff ff ff ff ff 
04: 03 fe 58 ff ff 80 3f ff 2d ff ff ff 10 05 00 a3 
05: ff ff ff ff ff ff ff ff c1 ff ff ff ff 01 00 ff 
06: 00 ff ff ff ff 01 07 ff ff ff ff ff ff ff ff ff 
07: 00 0a 00 21 00 00 00 17 00 ff ff ff ff ff ff ff 
08: ff 03 1f 0f ff 3c 3c 3c 00 00 00 00 00 00 00 00 
09: 0a 00 00 00 00 0a 0a 0a 0a aa ef 80 ff 40 46 c4 
0a: 0e 01 00 00 ff 00 00 ff 00 00 80 66 66 06 01 01 
                                                ^^

This shows that PECI Agent 0 is supposed to be enabled.

Quoted 24 lines

0b: 00 00 00 00 02 01 35 00 1c 00 00 04 38 c0 c4 ff 0c: 01 00 00 00 00 00 00 00 00 07 02 ff ff ff ff ff 0d: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 0e: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 0f: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Bank 1:

    00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f 

00: 82 00 00 01 01 28 01 3c ff 33 ff ff 00 ff ff ff 01: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 02: 01 23 28 37 37 ff ff 28 51 ff ff ff ff ff ff ff 03: ff 00 ff ff 00 55 ff ff 05 01 00 00 00 00 00 00 04: ff ff ff ff ff d9 03 ff ff ff ff ff ff ff 01 ff 05: 00 00 00 5c 00 5f 00 ff ff ff ff ff ff ff ff ff 06: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 07: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 08: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 09: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 0a: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 0b: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 0c: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 0d: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 0e: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 0f: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Bank 2:

Quoted 2 lines
    00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f 

00: 8c 32 00 01 01 33 01 3c ff 33 ff ff 00 ff ff ff

      ^^

This value suggests that the second temperature sensor (the one creating the alarm) is supposed to be the PECI source (which reports the CPU temperature to the NCT6776), and that it is supposed to be used to control the speed of the CPU fan.

            ^^

Fan control is in manual mode. Did you set this ?
It is quite unusual.

Quoted 88 lines

01: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 02: 01 32 5a 5a 5a ff ff 33 ff ff ff ff ff ff ff ff 03: ff 00 ff ff 00 5f ff ff 03 01 00 00 00 00 00 00 04: ff ff ff ff ff 2c 05 ff ff ff ff ff ff ff 02 ff 05: 21 00 00 5c 00 5f 00 ff ff ff ff ff ff ff ff ff 06: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 07: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 08: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 09: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 0a: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 0b: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 0c: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 0d: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 0e: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 0f: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Bank 3:

    00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f 

00: 03 00 00 0a 0a 01 01 3c ff ff ff ff 00 ff ff ff 01: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 02: 00 19 23 2d 37 ff ff 8c aa c8 e6 ff ff ff ff ff 03: ff 00 ff ff 00 3c ff ff 00 01 00 00 00 00 00 00 04: ff ff ff ff ff 48 04 ff ff ff ff ff ff ff 03 ff 05: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 06: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 07: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 08: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 09: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 0a: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 0b: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 0c: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 0d: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 0e: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 0f: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Bank 4:

    00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f 

00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01: 00 00 00 00 00 00 00 00 00 00 00 ff ff ff ff ff 02: ff ff ff 96 64 96 64 e1 96 ff ff ff ff ff ff ff 03: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 04: 3f 00 03 ff ff ff ff ff ff ff ff ff ff ff 04 ff 05: 31 13 ff ff 00 00 00 ff 00 20 12 00 09 ff ff ff 06: ff 01 00 00 00 00 00 00 ff ff ff ff ff ff ff ff 07: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 08: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 09: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 0a: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 0b: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 0c: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 0d: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 0e: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 0f: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Bank 5:

    00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f 

00: ff ff 00 00 00 00 ff ff ff ff ff ff ff 00 00 ff 01: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 02: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 03: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 04: ff ff ff ff ff ff ff ff ff ff ff ff ff ff 05 ff 05: df d9 c0 ff e3 ba e3 a9 ff ff ff ff ff ff ff ff 06: 00 00 00 00 00 00 07 01 01 ff ff ff ff ff ff ff 07: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 08: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 09: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 0a: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 0b: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 0c: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 0d: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 0e: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 0f: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Bank 6:

    00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f 

00: 00 00 ff ff ff ff ff ff ff ff ff ff ff ff ff ff 01: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 02: ff 01 0c 02 03 01 01 ff 00 00 00 17 2b 2b 00 ff 03: 2a 1a 1f 1c 26 0f 26 1f 2a 04 3c 06 3c 06 3c 06 04: 3c 06 3c 06 02 02 02 ff ff ff ff ff ff ff 06 ff 05: 7f 7f 7f 7f 7f 7f 03 d9 05 2b 04 48 04 3a 03 e9 06: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 07: 7f 7f 50 4b 04 7f 7f 50 4b 04 7f 7f 50 4b 04 ff 08: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 09: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 0a: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 0b: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 0c: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 0d: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 0e: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 0f: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Bank 7:

Quoted 3 lines
    00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f 

00: ff 95 02 10 00 00 00 00 00 64 00 00 00 00 00 00 01: 00 00 00 00 00 00 00 f8 80 f8 80 f8 80 f8 80 00

                                                   ^^

00 here shows that the PECI source is not active, ie the CPU does not deliver PECI data to the NCT6776. This explains the alarm.

Practical impact is probably limited as fan control is configured to be manual anyway, but I wonder why PECI doesn't work on your board. PECI configuration is identical to my Supermicro board.

Guenter

Quoted 56 lines

02: 28 00 06 00 00 09 00 00 00 ef 00 00 00 00 00 00 03: 00 00 00 ff ff ff ff ff ff ff ff ff ff ff ff ff 04: ff ff ff ff ff ff ff ff ff ff ff ff ff ff 07 ff 05: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 06: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 07: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 08: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 09: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 0a: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 0b: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 0c: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 0d: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 0e: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 0f: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Probing for Nuvoton Super I/O at 0x4e...
Failed. Returned data: chip_id=0xffff
Probing for Nuvoton Super I/O (sid=0xfc) at 0x4e...

Quoted 5 lines

[ .. ]

You have to specify the raw attribute names, not the symbolic ones. You see the raw attribute names with "sensors -u".

It has to be
ignore temp8
ignore temp9
ignore temp10

Woohoo! Thank you.

nct6776-isa-0a30

Adapter: ISA adapter
Vcore:        +0.83 V  (min =  +0.54 V, max =  +1.49 V)
in1:          +1.85 V  (min =  +1.62 V, max =  +1.99 V)
AVCC:         +3.30 V  (min =  +2.98 V, max =  +3.63 V)
+3.3V:        +3.28 V  (min =  +2.98 V, max =  +3.63 V)
in4:          +1.50 V  (min =  +1.35 V, max =  +1.65 V)
in5:          +1.26 V  (min =  +1.13 V, max =  +1.38 V)
in6:          +1.06 V  (min =  +0.92 V, max =  +1.34 V)
3VSB:         +3.57 V  (min =  +2.98 V, max =  +3.63 V)
Vbat:         +3.47 V  (min =  +2.70 V, max =  +3.63 V)
fan1:        1010 RPM  (min =  700 RPM)
fan2:        1324 RPM  (min =  700 RPM)
fan3:        1102 RPM  (min =  700 RPM)
fan4:        1062 RPM  (min =  700 RPM)
fan5:         991 RPM  (min =  700 RPM)
SYSTIN:       +43.0 C  (high = +75.0 C, hyst = +70.0 C)  sensor = thermistor
CPUTIN:       +33.0 C  (high = +95.0 C, hyst = +92.0 C)  ALARM  sensor =

thermistor
AUXTIN: +23.0 C (high = +80.0 C, hyst = +75.0 C) sensor = thermistor

Justin.

#8 lore raw
In reply to Guenter Roeck

Hi Guenter, Justin,

Quoted 9 lines · Guenter Roeck
Quoted 5 lines · Justin Piszcz

I also found:
http://www.lm-sensors.org/wiki/Configurations/SuperMicro/X9SRA

Does Super Micro also have such a config file for the X9SRL-F? This board uses a NCT6776F.

Supermicro does not provide configuration files. You can take the above file, test and update it, and let us know so we can add it to the wiki.

Actually they do provide configuration information. They have their own tool names SuperDoctor, which can be downloaded from:
ftp://ftp.supermicro.com/utility/SuperDoctor_II/Linux/Release/

If you look at file AllSuperD.ini, you'll find per-board entries describing the input mapping. It is very helpful when writing a custom libsensors configuration file for the board in question. It takes some knowledge of the monitoring chip or its driver though, as the ini file references register addresses ("Offset" in the file.)

A gave a quick look and at least the voltage input mapping (and presumably the voltage scaling factors as well) is similar to the X9SRA so you can reuse this part of the X9SRA configuration file.

Hope that helps,

Signature · 6 lines
Jean Delvare

_______________________________________________
lm-sensors mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
#9 lore raw

Thanks for these details!

Quoted 23 lines · Jean Delvare

Hi Guenter, Justin,

Quoted 9 lines · Guenter Roeck
Quoted 5 lines · Justin Piszcz

I also found:
http://www.lm-sensors.org/wiki/Configurations/SuperMicro/X9SRA

Does Super Micro also have such a config file for the X9SRL-F? This board uses a NCT6776F.

Supermicro does not provide configuration files. You can take the above file, test and update it, and let us know so we can add it to the wiki.

Actually they do provide configuration information. They have their own tool names SuperDoctor, which can be downloaded from:
ftp://ftp.supermicro.com/utility/SuperDoctor_II/Linux/Release/

If you look at file AllSuperD.ini, you'll find per-board entries describing the input mapping. It is very helpful when writing a custom libsensors configuration file for the board in question. It takes some knowledge of the monitoring chip or its driver though, as the ini file references register addresses ("Offset" in the file.)

Quoted 7 lines

A gave a quick look and at least the voltage input mapping (and presumably the voltage scaling factors as well) is similar to the X9SRA so you can reuse this part of the X9SRA configuration file.

Hope that helps,
--
Jean Delvare

_______________________________________________
lm-sensors mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors

#10 lore raw
In reply to Justin Piszcz

-----Original Message-----
From: Guenter Roeck [mailto:[email protected]]
Sent: Wednesday, July 03, 2013 4:57 PM
To: Justin Piszcz
Cc: [email protected]; [email protected]
Subject: Re: [lm-sensors] 3.10: NCT6776F sensor question with Supermicro X9SRL-F motherboard

[ .. ]

Quoted 3 lines

09: 0a 00 00 00 00 0a 0a 0a 0a aa ef 80 ff 40 46 c4

0a: 0e 01 00 00 ff 00 00 ff 00 00 80 66 66 06 01 01

                                                ^^

This shows that PECI Agent 0 is supposed to be enabled.

Quoted 5 lines

Bank 2:

    00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f 

00: 8c 32 00 01 01 33 01 3c ff 33 ff ff 00 ff ff ff

      ^^

This value suggests that the second temperature sensor (the one creating

the alarm) is supposed to be the PECI source (which reports the CPU temperature

to the NCT6776), and that it is supposed to be used to control the speed

of the CPU fan.

            ^^

Fan control is in manual mode. Did you set this ?

It is quite unusual.

Setting:

Current FAN Mode is Optimal.

Set Fan to Standard Speed

Set Fan to Full Speed

Set Fan to Optimal Speed

Quoted 7 lines

Bank 7:

    00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f 

00: ff 95 02 10 00 00 00 00 00 64 00 00 00 00 00 00

01: 00 00 00 00 00 00 00 f8 80 f8 80 f8 80 f8 80 00

                                                   ^^

00 here shows that the PECI source is not active, ie the CPU does not deliver

PECI data to the NCT6776. This explains the alarm.

Practical impact is probably limited as fan control is configured to be manual

anyway, but I wonder why PECI doesn't work on your board. PECI configuration

is identical to my Supermicro board.

Guenter

_______________________________________________
lm-sensors mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors

#11 lore raw

Re-sending as text.

From: Justin Piszcz [mailto:[email protected]]
Sent: Wednesday, July 03, 2013 5:00 PM
To: 'Guenter Roeck'
Cc: [email protected]; [email protected]
Subject: RE: [lm-sensors] 3.10: NCT6776F sensor question with Supermicro X9SRL-F motherboard

-----Original Message-----
From: Guenter Roeck [mailto:[email protected]]
Sent: Wednesday, July 03, 2013 4:57 PM
To: Justin Piszcz
Cc: [email protected]; [email protected]
Subject: Re: [lm-sensors] 3.10: NCT6776F sensor question with Supermicro X9SRL-F motherboard

[ .. ]

Quoted 2 lines

09: 0a 00 00 00 00 0a 0a 0a 0a aa ef 80 ff 40 46 c4 0a: 0e 01 00 00 ff 00 00 ff 00 00 80 66 66 06 01 01

                                                ^^ This shows that PECI Agent 0 is supposed to be enabled.

Quoted 3 lines

Bank 2:
     00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f 00: 8c 32 00 01 01 33 01 3c ff 33 ff ff 00 ff ff ff

      ^^
This value suggests that the second temperature sensor (the one creating the alarm) is supposed to be the PECI source (which reports the CPU temperature
to the NCT6776), and that it is supposed to be used to control the speed of the CPU fan.
            ^^
Fan control is in manual mode. Did you set this ?
It is quite unusual.

Setting:
Current FAN Mode is Optimal.
Set Fan to Standard Speed
Set Fan to Full Speed
Set Fan to Optimal Speed

Quoted 4 lines

Bank 7:
     00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f 00: ff 95 02 10 00 00 00 00 00 64 00 00 00 00 00 00 01: 00 00 00 00 00 00 00 f8 80 f8 80 f8 80 f8 80 00

                                                   ^^
00 here shows that the PECI source is not active, ie the CPU does not deliver
PECI data to the NCT6776. This explains the alarm.

Practical impact is probably limited as fan control is configured to be manual
anyway, but I wonder why PECI doesn't work on your board. PECI configuration is identical to my Supermicro board.

Guenter

_______________________________________________
lm-sensors mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors

#12 lore raw
Quoted 39 lines · Justin Piszcz

Re-sending as text.

From: Justin Piszcz [mailto:[email protected]]
Sent: Wednesday, July 03, 2013 5:00 PM
To: 'Guenter Roeck'
Cc: [email protected]; [email protected]
Subject: RE: [lm-sensors] 3.10: NCT6776F sensor question with Supermicro X9SRL-F motherboard

-----Original Message-----
From: Guenter Roeck [mailto:[email protected]]
Sent: Wednesday, July 03, 2013 4:57 PM
To: Justin Piszcz
Cc: [email protected]; [email protected]
Subject: Re: [lm-sensors] 3.10: NCT6776F sensor question with Supermicro X9SRL-F motherboard

[ .. ]

Quoted 2 lines

09: 0a 00 00 00 00 0a 0a 0a 0a aa ef 80 ff 40 46 c4 0a: 0e 01 00 00 ff 00 00 ff 00 00 80 66 66 06 01 01

                                                ^^ This shows that PECI Agent 0 is supposed to be enabled.

Quoted 3 lines

Bank 2:
     00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f 00: 8c 32 00 01 01 33 01 3c ff 33 ff ff 00 ff ff ff

      ^^
This value suggests that the second temperature sensor (the one creating the alarm) is supposed to be the PECI source (which reports the CPU temperature
to the NCT6776), and that it is supposed to be used to control the speed of the CPU fan.
            ^^
Fan control is in manual mode. Did you set this ?
It is quite unusual.

Quoted 6 lines

Setting:
Current FAN Mode is Optimal.
Set Fan to Standard Speed
Set Fan to Full Speed
Set Fan to Optimal Speed

Maybe that translates into fixed speeds.

Guenter