Skip to contentSkip to conversation

WARNING: at drivers/iommu/dmar.c:484 warn_invalid_dmar with Intel Motherboard

DISCUSSION Guenter Roeck 5 participants 13 messages Jul 9, 2013 – Aug 14, 2013

lore
Share & tools
lore
#0 lore raw

I started seeing this problem after updating the BIOS trying fix another issue, though I may have missed it earlier.

I understand this is a BIOS bug. Would be great if someone can pass this on to Intel BIOS engineers.

CPU is i7-4770K.

Guenter

---

[    0.000000] WARNING: at drivers/iommu/dmar.c:484 warn_invalid_dmar+0x86/0xa0()
[    0.000000] Your BIOS is broken; DMAR reported at address 0!
[    0.000000] BIOS vendor: Intel Corp.; Ver: RLH8710H.86A.0320.2013.0606.1802; Product Version:
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 3.10.0+ #1
[    0.000000] Hardware name:                  /DH87RL, BIOS RLH8710H.86A.0320.2013.0606.1802 06/06/2013
[    0.000000]  000000000000000b ffffffff81c01e20 ffffffff81671cfc ffffffff81c01e68
[    0.000000]  ffffffff81c01e58 ffffffff81043370 ffffffff81f6800c ffffffff81cbb520
[    0.000000]  0000000000000000 ffff88061fdaad40 00000000c73cc018 ffffffff81c01eb8
[    0.000000] Call Trace:
[    0.000000]  [<ffffffff81671cfc>] dump_stack+0x45/0x56
[    0.000000]  [<ffffffff81043370>] warn_slowpath_common+0x70/0xa0
[    0.000000]  [<ffffffff81043404>] warn_slowpath_fmt_taint+0x44/0x50
[    0.000000]  [<ffffffff81d162eb>] ? early_ioremap+0x13/0x15
[    0.000000]  [<ffffffff81d0d6a6>] ? __acpi_map_table+0x13/0x1a
[    0.000000]  [<ffffffff81548bf6>] warn_invalid_dmar+0x86/0xa0
[    0.000000]  [<ffffffff81d4b994>] check_zero_address+0x57/0xf7
[    0.000000]  [<ffffffff81d4ba49>] detect_intel_iommu+0x15/0xb6
[    0.000000]  [<ffffffff81d07d28>] pci_iommu_alloc+0x49/0x70
[    0.000000]  [<ffffffff81d15de4>] mem_init+0x17/0x9c
[    0.000000]  [<ffffffff81d01c54>] start_kernel+0x1c5/0x3e2
[    0.000000]  [<ffffffff81d01898>] ? repair_env_string+0x5e/0x5e
[    0.000000]  [<ffffffff81d015a3>] x86_64_start_reservations+0x2a/0x2c
[    0.000000]  [<ffffffff81d0169b>] x86_64_start_kernel+0xf6/0xf9
[    0.000000] ---[ end trace a7e3512e2fa85eaf ]---
#1 lore raw

[+cc Joerg, David, iommu list]

Quoted 5 lines · Guenter Roeck

I started seeing this problem after updating the BIOS trying fix another issue, though I may have missed it earlier.

I understand this is a BIOS bug. Would be great if someone can pass this on to Intel BIOS engineers.

Maybe. It'd be nice if Linux handled it better, though.

Quoted 36 lines

CPU is i7-4770K.

Guenter

---

[    0.000000] WARNING: at drivers/iommu/dmar.c:484 warn_invalid_dmar+0x86/0xa0()
[    0.000000] Your BIOS is broken; DMAR reported at address 0!
[    0.000000] BIOS vendor: Intel Corp.; Ver: RLH8710H.86A.0320.2013.0606.1802; Product Version:
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 3.10.0+ #1
[    0.000000] Hardware name:                  /DH87RL, BIOS RLH8710H.86A.0320.2013.0606.1802 06/06/2013
[    0.000000]  000000000000000b ffffffff81c01e20 ffffffff81671cfc ffffffff81c01e68
[    0.000000]  ffffffff81c01e58 ffffffff81043370 ffffffff81f6800c ffffffff81cbb520
[    0.000000]  0000000000000000 ffff88061fdaad40 00000000c73cc018 ffffffff81c01eb8
[    0.000000] Call Trace:
[    0.000000]  [<ffffffff81671cfc>] dump_stack+0x45/0x56
[    0.000000]  [<ffffffff81043370>] warn_slowpath_common+0x70/0xa0
[    0.000000]  [<ffffffff81043404>] warn_slowpath_fmt_taint+0x44/0x50
[    0.000000]  [<ffffffff81d162eb>] ? early_ioremap+0x13/0x15
[    0.000000]  [<ffffffff81d0d6a6>] ? __acpi_map_table+0x13/0x1a
[    0.000000]  [<ffffffff81548bf6>] warn_invalid_dmar+0x86/0xa0
[    0.000000]  [<ffffffff81d4b994>] check_zero_address+0x57/0xf7
[    0.000000]  [<ffffffff81d4ba49>] detect_intel_iommu+0x15/0xb6
[    0.000000]  [<ffffffff81d07d28>] pci_iommu_alloc+0x49/0x70
[    0.000000]  [<ffffffff81d15de4>] mem_init+0x17/0x9c
[    0.000000]  [<ffffffff81d01c54>] start_kernel+0x1c5/0x3e2
[    0.000000]  [<ffffffff81d01898>] ? repair_env_string+0x5e/0x5e
[    0.000000]  [<ffffffff81d015a3>] x86_64_start_reservations+0x2a/0x2c
[    0.000000]  [<ffffffff81d0169b>] x86_64_start_kernel+0xf6/0xf9
[    0.000000] ---[ end trace a7e3512e2fa85eaf ]---

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

#2 lore raw
Quoted 11 lines · Bjorn Helgaas

[+cc Joerg, David, iommu list]

Quoted 5 lines · Guenter Roeck

I started seeing this problem after updating the BIOS trying fix another issue, though I may have missed it earlier.

I understand this is a BIOS bug. Would be great if someone can pass this on to Intel BIOS engineers.

Maybe. It'd be nice if Linux handled it better, though.

If anyone has an idea how to do that, I'll be happy to write a patch.

Guenter

Quoted 37 lines
Quoted 36 lines

CPU is i7-4770K.

Guenter

---

[    0.000000] WARNING: at drivers/iommu/dmar.c:484 warn_invalid_dmar+0x86/0xa0()
[    0.000000] Your BIOS is broken; DMAR reported at address 0!
[    0.000000] BIOS vendor: Intel Corp.; Ver: RLH8710H.86A.0320.2013.0606.1802; Product Version:
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 3.10.0+ #1
[    0.000000] Hardware name:                  /DH87RL, BIOS RLH8710H.86A.0320.2013.0606.1802 06/06/2013
[    0.000000]  000000000000000b ffffffff81c01e20 ffffffff81671cfc ffffffff81c01e68
[    0.000000]  ffffffff81c01e58 ffffffff81043370 ffffffff81f6800c ffffffff81cbb520
[    0.000000]  0000000000000000 ffff88061fdaad40 00000000c73cc018 ffffffff81c01eb8
[    0.000000] Call Trace:
[    0.000000]  [<ffffffff81671cfc>] dump_stack+0x45/0x56
[    0.000000]  [<ffffffff81043370>] warn_slowpath_common+0x70/0xa0
[    0.000000]  [<ffffffff81043404>] warn_slowpath_fmt_taint+0x44/0x50
[    0.000000]  [<ffffffff81d162eb>] ? early_ioremap+0x13/0x15
[    0.000000]  [<ffffffff81d0d6a6>] ? __acpi_map_table+0x13/0x1a
[    0.000000]  [<ffffffff81548bf6>] warn_invalid_dmar+0x86/0xa0
[    0.000000]  [<ffffffff81d4b994>] check_zero_address+0x57/0xf7
[    0.000000]  [<ffffffff81d4ba49>] detect_intel_iommu+0x15/0xb6
[    0.000000]  [<ffffffff81d07d28>] pci_iommu_alloc+0x49/0x70
[    0.000000]  [<ffffffff81d15de4>] mem_init+0x17/0x9c
[    0.000000]  [<ffffffff81d01c54>] start_kernel+0x1c5/0x3e2
[    0.000000]  [<ffffffff81d01898>] ? repair_env_string+0x5e/0x5e
[    0.000000]  [<ffffffff81d015a3>] x86_64_start_reservations+0x2a/0x2c
[    0.000000]  [<ffffffff81d0169b>] x86_64_start_kernel+0xf6/0xf9
[    0.000000] ---[ end trace a7e3512e2fa85eaf ]---

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

#3 lore raw
Quoted 7 lines · * Guenter Roeck ([email protected]) wrote:
Quoted 6 lines · Bjorn Helgaas

[+cc Joerg, David, iommu list]

Quoted 3 lines · Guenter Roeck

I started seeing this problem after updating the BIOS trying fix another issue, though I may have missed it earlier.

Quoted 6 lines
Quoted 5 lines
Quoted 2 lines

I understand this is a BIOS bug. Would be great if someone can pass this on to Intel BIOS engineers.

Maybe. It'd be nice if Linux handled it better, though.

If anyone has an idea how to do that, I'll be happy to write a patch.

I'm not sure there's much you can do. The BIOS is saying there's a DMAR unit, and then saying the registers are at addr 0x0. The kernel is simply warning you about the invalid DMAR table entry.

One thing I've seen is the BIOS zeroing the base register address when VT-d is disabled in BIOS. So, Guenter, a "fix" may be simply enabling VT-d in the BIOS.

thanks,
-chris

#4 lore raw
Quoted 15 lines · Chris Wright
Quoted 7 lines · * Guenter Roeck ([email protected]) wrote:
Quoted 6 lines · Bjorn Helgaas

[+cc Joerg, David, iommu list]

Quoted 3 lines · Guenter Roeck

I started seeing this problem after updating the BIOS trying fix another issue, though I may have missed it earlier.

Quoted 6 lines
Quoted 5 lines
Quoted 2 lines

I understand this is a BIOS bug. Would be great if someone can pass this on to Intel BIOS engineers.

Maybe. It'd be nice if Linux handled it better, though.

If anyone has an idea how to do that, I'll be happy to write a patch.

Quoted 8 lines

I'm not sure there's much you can do. The BIOS is saying there's a DMAR unit, and then saying the registers are at addr 0x0. The kernel is simply warning you about the invalid DMAR table entry.

One thing I've seen is the BIOS zeroing the base register address when VT-d is disabled in BIOS. So, Guenter, a "fix" may be simply enabling VT-d in the BIOS.

Ah, yes, I think I may have that disabled. I'll check it tonight.

Does that really warrant a traceback, or would a warning message be more appropriate (possibly telling the user to enable VT-d) ?

Thanks,
Guenter

#5 lore raw
Quoted 20 lines · * Guenter Roeck ([email protected]) wrote:
Quoted 19 lines · Chris Wright
Quoted 7 lines · * Guenter Roeck ([email protected]) wrote:
Quoted 6 lines · Bjorn Helgaas

[+cc Joerg, David, iommu list]

Quoted 3 lines · Guenter Roeck

I started seeing this problem after updating the BIOS trying fix another issue, though I may have missed it earlier.

Quoted 6 lines
Quoted 5 lines
Quoted 2 lines

I understand this is a BIOS bug. Would be great if someone can pass this on to Intel BIOS engineers.

Maybe. It'd be nice if Linux handled it better, though.

If anyone has an idea how to do that, I'll be happy to write a patch.

I'm not sure there's much you can do. The BIOS is saying there's a DMAR unit, and then saying the registers are at addr 0x0. The kernel is simply warning you about the invalid DMAR table entry.

Quoted 8 lines
Quoted 3 lines

One thing I've seen is the BIOS zeroing the base register address when VT-d is disabled in BIOS. So, Guenter, a "fix" may be simply enabling VT-d in the BIOS.

Ah, yes, I think I may have that disabled. I'll check it tonight.

Does that really warrant a traceback, or would a warning message be more appropriate (possibly telling the user to enable VT-d) ?

Bottom line, the BIOS is providing what we're seeing as invalid tables. If it's a BIOS attempt to disable VT-d is hard to glean from invalid tables, and not all BIOS give interface to enable/disable VT-d.

It is a warning message, BTW. Guess I'd be inclined to leave as it is.

thanks,
-chris

#6 lore raw
Quoted 27 lines · Chris Wright
Quoted 26 lines · * Guenter Roeck ([email protected]) wrote:
Quoted 15 lines · Chris Wright
Quoted 7 lines · * Guenter Roeck ([email protected]) wrote:
Quoted 6 lines · Bjorn Helgaas

[+cc Joerg, David, iommu list]

Quoted 3 lines · Guenter Roeck

I started seeing this problem after updating the BIOS trying fix another issue, though I may have missed it earlier.

Quoted 6 lines
Quoted 5 lines
Quoted 2 lines

I understand this is a BIOS bug. Would be great if someone can pass this on to Intel BIOS engineers.

Maybe. It'd be nice if Linux handled it better, though.

If anyone has an idea how to do that, I'll be happy to write a patch.

Quoted 7 lines

I'm not sure there's much you can do. The BIOS is saying there's a DMAR unit, and then saying the registers are at addr 0x0. The kernel is simply warning you about the invalid DMAR table entry.

One thing I've seen is the BIOS zeroing the base register address when VT-d is disabled in BIOS. So, Guenter, a "fix" may be simply enabling VT-d in the BIOS.

Ah, yes, I think I may have that disabled. I'll check it tonight.

Quoted 9 lines
Quoted 2 lines

Does that really warrant a traceback, or would a warning message be more appropriate (possibly telling the user to enable VT-d) ?

Bottom line, the BIOS is providing what we're seeing as invalid tables. If it's a BIOS attempt to disable VT-d is hard to glean from invalid tables, and not all BIOS give interface to enable/disable VT-d.

It is a warning message, BTW. Guess I'd be inclined to leave as it is.

I meant warning as in pr_warn or dev_warn, not WARNING as in traceback. Keep in mind that a casual user doesn't expect to see a traceback and will tend to get alarmed. Several bugs have been filed against this "issue" in various distributions, which is not surprising given the alarmist message. What is the point of that ?

Guenter

#7 lore raw
Quoted 6 lines · Guenter Roeck

I meant warning as in pr_warn or dev_warn, not WARNING as in traceback. Keep in mind that a casual user doesn't expect to see a traceback and will tend to get alarmed. Several bugs have been filed against this "issue" in various distributions, which is not surprising given the alarmist message. What is the point of that ?

It is warning you that your hardware is broken. Take it back to the place from which you purchased it, and ask for your money back if it isn't fixed.

(Slightly) more seriously, this level of warning *does* get things fixed, and when kerneloops was running it made it very easy to track this kind of issue and apply pressure where it was needed to improve quality.

Any user who has taken the trouble to file bugs has *also* taken it up with their firmware vendor, I hope?

Signature · 1 line
dwmw2
#8 lore raw
Quoted 12 lines · David Woodhouse
Quoted 6 lines · Guenter Roeck

I meant warning as in pr_warn or dev_warn, not WARNING as in traceback. Keep in mind that a casual user doesn't expect to see a traceback and will tend to get alarmed. Several bugs have been filed against this "issue" in various distributions, which is not surprising given the alarmist message. What is the point of that ?

It is warning you that your hardware is broken. Take it back to the place from which you purchased it, and ask for your money back if it isn't fixed.

Quoted 8 lines

(Slightly) more seriously, this level of warning *does* get things fixed, and when kerneloops was running it made it very easy to track this kind of issue and apply pressure where it was needed to improve quality.

Any user who has taken the trouble to file bugs has *also* taken it up with their firmware vendor, I hope?

No idea ... but have you ever tried that as a private entity ?

If there is a secret list of people to contact at vendor X to get things like this one fixed, please let me know ;).

Thanks,
Guenter

#9 lore raw
In reply to Guenter Roeck
Quoted 6 lines · * Guenter Roeck ([email protected]) wrote:
Quoted 4 lines · Chris Wright

One thing I've seen is the BIOS zeroing the base register address when VT-d is disabled in BIOS. So, Guenter, a "fix" may be simply enabling VT-d in the BIOS.

Ah, yes, I think I may have that disabled. I'll check it tonight.

Did you find out if BIOS change fixed this?

thanks,
-chris

#10 lore raw
Quoted 10 lines · Chris Wright
Quoted 6 lines · * Guenter Roeck ([email protected]) wrote:
Quoted 4 lines · Chris Wright

One thing I've seen is the BIOS zeroing the base register address when VT-d is disabled in BIOS. So, Guenter, a "fix" may be simply enabling VT-d in the BIOS.

Ah, yes, I think I may have that disabled. I'll check it tonight.

Did you find out if BIOS change fixed this?

No, it didn't. Enabling or disabling virtualization in the BIOS did not make a difference. It looks like there is a bad DMAR table entry (with address 0) in the ACPI data. In case you are interested how it looks like:

DMAR @ 0xcb3f3f90

  0000: 44 4d 41 52 90 00 00 00 01 d5 49 4e 54 45 4c 20  DMAR......INTEL
  0010: 44 48 38 37 52 4c 20 20 40 01 00 00 49 4e 54 4c  DH87RL  @...INTL
  0020: 01 00 00 00 26 00 00 00 00 00 00 00 00 00 00 00  ....&...........
  0030: 00 00 10 00 01 00 00 00 00 00 00 00 00 00 00 00  ................
  0040: 01 00 30 00 00 00 00 00 00 b0 eb cb 00 00 00 00  ..0.............
  0050: ff 9f ec cb 00 00 00 00 01 08 00 00 00 00 1d 00  ................
  0060: 01 08 00 00 00 00 1a 00 01 08 00 00 00 00 14 00  ................
  0070: 01 00 20 00 00 00 00 00 00 00 00 d7 00 00 00 00  .. .............
  0080: ff ff 1f df 00 00 00 00 01 08 00 00 00 00 02 00  ................

Turns out the i7-4770K doesn't support VT-d, so my current understanding is that there should be no DMAR table in the first place.

Guenter

#11 lore raw
Quoted 26 lines · * Guenter Roeck ([email protected]) wrote:
Quoted 10 lines · Chris Wright
Quoted 6 lines · * Guenter Roeck ([email protected]) wrote:
Quoted 4 lines · Chris Wright

One thing I've seen is the BIOS zeroing the base register address when VT-d is disabled in BIOS. So, Guenter, a "fix" may be simply enabling VT-d in the BIOS.

Ah, yes, I think I may have that disabled. I'll check it tonight.

Did you find out if BIOS change fixed this?

No, it didn't. Enabling or disabling virtualization in the BIOS did not make a difference. It looks like there is a bad DMAR table entry (with address 0) in the ACPI data. In case you are interested how it looks like:

DMAR @ 0xcb3f3f90

  0000: 44 4d 41 52 90 00 00 00 01 d5 49 4e 54 45 4c 20  DMAR......INTEL
  0010: 44 48 38 37 52 4c 20 20 40 01 00 00 49 4e 54 4c  DH87RL  @...INTL
  0020: 01 00 00 00 26 00 00 00 00 00 00 00 00 00 00 00  ....&...........
  0030: 00 00 10 00 01 00 00 00 00 00 00 00 00 00 00 00  ................
  0040: 01 00 30 00 00 00 00 00 00 b0 eb cb 00 00 00 00  ..0.............
  0050: ff 9f ec cb 00 00 00 00 01 08 00 00 00 00 1d 00  ................
  0060: 01 08 00 00 00 00 1a 00 01 08 00 00 00 00 14 00  ................
  0070: 01 00 20 00 00 00 00 00 00 00 00 d7 00 00 00 00  .. .............
  0080: ff ff 1f df 00 00 00 00 01 08 00 00 00 00 02 00  ................
Quoted 2 lines

Turns out the i7-4770K doesn't support VT-d, so my current understanding is that there should be no DMAR table in the first place.

OK, thanks for follow-up. You can see why the warnings are there now. This is your decoded DMAR table...has valid looking RMRR regions, and mostly valid looking DRHD (minus the invalid base address).

/*
* Intel ACPI Component Architecture
* AML Disassembler version 20100528
*
* Disassembly of /tmp/dmar, Thu Jul 11 15:24:28 2013
*
* ACPI Data Table [DMAR]
*
* Format: [HexOffset DecimalOffset ByteLength] FieldName : FieldValue */

[000h 0000  4]                    Signature : "DMAR"    /* DMA Remapping table */
[004h 0004  4]                 Table Length : 00000090
[008h 0008  1]                     Revision : 01
[009h 0009  1]                     Checksum : D5
[00Ah 0010  6]                       Oem ID : "INTEL "
[010h 0016  8]                 Oem Table ID : "DH87RL  "
[018h 0024  4]                 Oem Revision : 00000140
[01Ch 0028  4]              Asl Compiler ID : "INTL"
[020h 0032  4]        Asl Compiler Revision : 00000001

[024h 0036 1] Host Address Width : 26
[025h 0037 1] Flags : 00

[030h 0048  2]                Subtable Type : 0000 <Hardware Unit Definition>
[032h 0050  2]                       Length : 0010
[034h 0052  1]                        Flags : 01
[035h 0053  1]                     Reserved : 00
[036h 0054  2]           PCI Segment Number : 0000
[038h 0056  8]        Register Base Address : 0000000000000000
[040h 0064  2]                Subtable Type : 0001 <Reserved Memory Region>
[042h 0066  2]                       Length : 0030
[044h 0068  2]                     Reserved : 0000
[046h 0070  2]           PCI Segment Number : 0000
[048h 0072  8]                 Base Address : 00000000CBEBB000
[050h 0080  8]          End Address (limit) : 00000000CBEC9FFF
[058h 0088  1]      Device Scope Entry Type : 01
[059h 0089  1]                 Entry Length : 08
[05Ah 0090  2]                     Reserved : 0000
[05Ch 0092  1]               Enumeration ID : 00
[05Dh 0093  1]               PCI Bus Number : 00
[05Eh 0094  2]                     PCI Path : [1D, 00]
[060h 0096  1]      Device Scope Entry Type : 01
[061h 0097  1]                 Entry Length : 08
[062h 0098  2]                     Reserved : 0000
[064h 0100  1]               Enumeration ID : 00
[065h 0101  1]               PCI Bus Number : 00
[066h 0102  2]                     PCI Path : [1A, 00]
[068h 0104  1]      Device Scope Entry Type : 01
[069h 0105  1]                 Entry Length : 08
[06Ah 0106  2]                     Reserved : 0000
[06Ch 0108  1]               Enumeration ID : 00
[06Dh 0109  1]               PCI Bus Number : 00
[06Eh 0110  2]                     PCI Path : [14, 00]
[070h 0112  2]                Subtable Type : 0001 <Reserved Memory Region>
[072h 0114  2]                       Length : 0020
[074h 0116  2]                     Reserved : 0000
[076h 0118  2]           PCI Segment Number : 0000
[078h 0120  8]                 Base Address : 00000000D7000000
[080h 0128  8]          End Address (limit) : 00000000DF1FFFFF
[088h 0136  1]      Device Scope Entry Type : 01
[089h 0137  1]                 Entry Length : 08
[08Ah 0138  2]                     Reserved : 0000
[08Ch 0140  1]               Enumeration ID : 00
[08Dh 0141  1]               PCI Bus Number : 00
[08Eh 0142  2]                     PCI Path : [02, 00]

Raw Table Data

  0000: 44 4D 41 52 90 00 00 00 01 D5 49 4E 54 45 4C 20  DMAR......INTEL 
  0010: 44 48 38 37 52 4C 20 20 40 01 00 00 49 4E 54 4C  DH87RL  @...INTL
  0020: 01 00 00 00 26 00 00 00 00 00 00 00 00 00 00 00  ....&...........
  0030: 00 00 10 00 01 00 00 00 00 00 00 00 00 00 00 00  ................
  0040: 01 00 30 00 00 00 00 00 00 B0 EB CB 00 00 00 00  ..0.............
  0050: FF 9F EC CB 00 00 00 00 01 08 00 00 00 00 1D 00  ................
  0060: 01 08 00 00 00 00 1A 00 01 08 00 00 00 00 14 00  ................
  0070: 01 00 20 00 00 00 00 00 00 00 00 D7 00 00 00 00  .. .............
  0080: FF FF 1F DF 00 00 00 00 01 08 00 00 00 00 02 00  ................
#12 lore raw
In reply to Guenter Roeck
Quoted 7 lines · Guenter Roeck
Quoted 6 lines · Bjorn Helgaas

[+cc Joerg, David, iommu list]

Quoted 3 lines · Guenter Roeck

I started seeing this problem after updating the BIOS trying fix another issue, though I may have missed it earlier.

Quoted 6 lines
Quoted 5 lines
Quoted 2 lines

I understand this is a BIOS bug. Would be great if someone can pass this on to Intel BIOS engineers.

Maybe. It'd be nice if Linux handled it better, though.

If anyone has an idea how to do that, I'll be happy to write a patch.

I doubt that we can do anything meaningful here. The BIOS is broken in a way so that we can't use the IOMMU in Linux. We can patch away the WARN_ON and make it a sumple FW_BUG message, but the noise a WARN_ON makes maybe help getting this issue fixed.

But I may be convinced otherwise, if people think this WARN_ON is not worth it.

Joerg