qemu: generate acpi tables for the guest
v2 cover qemu: generate acpi tables for the guest
This is just a repost to make sure it is actually testable for people - my previous post missed some patches. Sorry about the noise. I am still making changes to address Anthony's comments, reposting now so that people working on patches
that depend on this infrastructure can make progress.
This code can also be found here:git://git.kernel.org/pub/scm/virt/kvm/mst/qemu.git acpi
Changes from v2:
- added missing patches to make it actually build Changes from v1 RFC:
- added code to address cross version compatibility
- rebased to latest bits
- updated seabios code to latest bits (added pvpanic device)
This patchset moves all generation of ACPI tables
from guest BIOS to the hypervisor.
Although ACPI tables come from a system BIOS on real hw, it makes sense that the ACPI tables are coupled with the virtual machine, since they have to abstract the x86 machine to the OS's.
This is widely desired as a way to avoid the churn and proliferation of QEMU-specific interfaces associated with ACPI tables in bios code.
If you look at the actual code:
i386: imports ACPI table generation code from seabios
you will see that it's more complex than it needs to be, with lots of low level casts
and similar tricks.
There's also a bit of duplication where we
already declare similar acpi structures in qemu.
This is the result of code being a direct port from seabios. Laszlo's patch (build ACPI MADT (APIC) for fw_cfg) shows how this will be cleaned up by follow-up work. I think it's best to do it in this order: port code directly, and apply cleanups and reduce duplication that results, on top.
This way it's much easier to see that we don't introduce regressions.
In particular, for a simple VM with piix,
I booted a guest on qemu with and without the change, and verified that ACPI tables are unchanged except for trivial pointer address changes.
Such binary compatibility makes it easier to be
confident that this change won't break things.
Michael S. Tsirkin (9):
hw/i386/pc.c: move IO_APIC_DEFAULT_ADDRESS to include/hw/i386/apic.h
i386: add ACPI table files from seabios
acpi: add rules to compile ASL source
acpi: pre-compiled ASL files
i386: add bios linker/loader
loader: support for unmapped ROM blobs
loader: allow adding ROMs in done callbacks
i386: generate pc guest info
i386: ACPI table generation code from seabios
configure | 9 +- hw/acpi/ich9.c | 7 +- hw/acpi/piix4.c | 44 +- hw/core/loader.c | 38 +- hw/i386/Makefile.objs | 27 + hw/i386/acpi-build.c | 723 ++++ hw/i386/acpi-defs.h | 327 ++ hw/i386/acpi-dsdt-cpu-hotplug.dsl | 93 + hw/i386/acpi-dsdt-dbug.dsl | 41 + hw/i386/acpi-dsdt-hpet.dsl | 51 + hw/i386/acpi-dsdt-isa.dsl | 117 + hw/i386/acpi-dsdt-pci-crs.dsl | 105 + hw/i386/acpi-dsdt.dsl | 343 ++ hw/i386/acpi-dsdt.hex.generated | 4409 ++++++++++++++++++++ hw/i386/bios-linker-loader.c | 155 + hw/i386/pc.c | 45 +- hw/i386/pc_piix.c | 18 +- hw/i386/pc_q35.c | 13 +- hw/i386/q35-acpi-dsdt.dsl | 452 +++ hw/i386/q35-acpi-dsdt.hex.generated | 7346 ++++++++++++++++++++++++++++++++++ hw/i386/ssdt-misc.dsl | 119 + hw/i386/ssdt-misc.hex.generated | 190 + hw/i386/ssdt-pcihp.dsl | 51 + hw/i386/ssdt-pcihp.hex.generated | 108 + hw/i386/ssdt-proc.dsl | 63 + hw/i386/ssdt-proc.hex.generated | 134 + hw/isa/lpc_ich9.c | 11 +- hw/lm32/lm32_hwsetup.h | 2 +- hw/mips/mips_malta.c | 2 +- hw/misc/pvpanic.c | 12 +- hw/pci-host/q35.c | 1 + include/hw/acpi/ich9.h | 2 +- include/hw/i386/acpi-build.h | 9 + include/hw/i386/apic.h | 2 + include/hw/i386/bios-linker-loader.h | 26 + include/hw/i386/ich9.h | 3 +- include/hw/i386/pc.h | 38 +- include/hw/loader.h | 5 +- scripts/acpi_extract.py | 362 ++ scripts/acpi_extract_preprocess.py | 52 + scripts/update-acpi.sh | 4 + vl.c | 3 + 42 files changed, 15529 insertions(+), 33 deletions(-) create mode 100644 hw/i386/acpi-build.c create mode 100644 hw/i386/acpi-defs.h create mode 100644 hw/i386/acpi-dsdt-cpu-hotplug.dsl create mode 100644 hw/i386/acpi-dsdt-dbug.dsl create mode 100644 hw/i386/acpi-dsdt-hpet.dsl create mode 100644 hw/i386/acpi-dsdt-isa.dsl create mode 100644 hw/i386/acpi-dsdt-pci-crs.dsl create mode 100644 hw/i386/acpi-dsdt.dsl create mode 100644 hw/i386/acpi-dsdt.hex.generated create mode 100644 hw/i386/bios-linker-loader.c create mode 100644 hw/i386/q35-acpi-dsdt.dsl create mode 100644 hw/i386/q35-acpi-dsdt.hex.generated create mode 100644 hw/i386/ssdt-misc.dsl create mode 100644 hw/i386/ssdt-misc.hex.generated create mode 100644 hw/i386/ssdt-pcihp.dsl create mode 100644 hw/i386/ssdt-pcihp.hex.generated create mode 100644 hw/i386/ssdt-proc.dsl create mode 100644 hw/i386/ssdt-proc.hex.generated create mode 100644 include/hw/i386/acpi-build.h create mode 100644 include/hw/i386/bios-linker-loader.h create mode 100755 scripts/acpi_extract.py create mode 100755 scripts/acpi_extract_preprocess.py create mode 100644 scripts/update-acpi.sh
Signature · 1 line
MST
PATCH v2 1/9 hw/i386/pc.c: move IO_APIC_DEFAULT_ADDRESS to include/hw/i386/apic.h
--- hw/i386/pc.c | 2 -- include/hw/i386/apic.h | 2 ++ 2 files changed, 2 insertions(+), 2 deletions(-)
hw/i386/pc.c +0 -2
@@ -75,8 +75,6 @@#define FW_CFG_E820_TABLE (FW_CFG_ARCH_LOCAL + 3)#define FW_CFG_HPET (FW_CFG_ARCH_LOCAL + 4) -#define IO_APIC_DEFAULT_ADDRESS 0xfec00000 -#define E820_NR_ENTRIES 16struct e820_entry {
include/hw/i386/apic.h +2 -0
@@ -26,6 +26,8 @@ void apic_designate_bsp(DeviceState *d);/* pc.c */ DeviceState *cpu_get_current_apic (void ); +#define IO_APIC_DEFAULT_ADDRESS 0xfec00000 +/* cpu.c */ bool cpu_is_bsp (X86CPU *cpu);
Signature · 1 line
MST
Re: [Qemu-devel] [PATCH v2 repost 1/9] hw/i386/pc.c: move IO_APIC_DEFAULT_ADDRESS to include/hw/i386/apic.h
Quoted 7 lines · Michael S. Tsirkin
Signed-off-by Michael S. Tsirkin <[email protected]>Signed-off-by Laszlo Ersek <[email protected]>Signed-off-by Michael S. Tsirkin <[email protected]>--- hw/i386/pc.c | 2 -- include/hw/i386/apic.h | 2 ++ 2 files changed, 2 insertions(+), 2 deletions(-)
Re: [Qemu-devel] [PATCH v2 repost 1/9] hw/i386/pc.c: move IO_APIC_DEFAULT_ADDRESS to include/hw/i386/apic.h
In reply to Michael S. TsirkinQuoted 3 lines · Michael S. Tsirkin
Signed-off-by Michael S. Tsirkin <[email protected]>Signed-off-by Laszlo Ersek <[email protected]>Signed-off-by Michael S. Tsirkin <[email protected]>
Duplicated signed-off-by, although this is not a problem.
Quoted 35 lines
--- hw/i386/pc.c | 2 -- include/hw/i386/apic.h | 2 ++ 2 files changed, 2 insertions(+), 2 deletions(-)hw/i386/pc.c +0
-2@@ -75,8 +75,6 @@#define FW_CFG_E820_TABLE (FW_CFG_ARCH_LOCAL + 3)#define FW_CFG_HPET (FW_CFG_ARCH_LOCAL + 4) -#define IO_APIC_DEFAULT_ADDRESS 0xfec00000 -#define E820_NR_ENTRIES 16struct e820_entry {include/hw/i386/apic.h +2
-0@@ -26,6 +26,8 @@ void apic_designate_bsp(DeviceState *d);/* pc.c */ DeviceState *cpu_get_current_apic (void ); +#define IO_APIC_DEFAULT_ADDRESS 0xfec00000 +/* cpu.c */ bool cpu_is_bsp (X86CPU *cpu);Signature · 1 line
MST
PATCH v2 2/9 i386: add ACPI table files from seabios
In reply to Michael S. TsirkinThis adds ASL code as well as scripts for processing it, imported from seabios git tree
commit 51684b7ced75fb76776e8ee84833fcfb6ecf12dd
Will be used for runtime acpi table generation.
Note:
This patch reuses some code from SeaBIOS, which was originally under LGPLv2 and then relicensed to GPLv3 or LGPLv3, in QEMU under GPLv2+. This relicensing has been acked by all contributors that had contributed to the code since the v2->v3 relicense. ACKs approving the v2+ relicensing are listed below. The list might include ACKs from people not holding copyright on any parts of the reused code, but it's better to err on the side of caution and include them.
Affected SeaBIOS files (GPLv2+ license headers added)
<http://thread.gmane.org/gmane.comp.bios.coreboot.seabios/5949>:
src/acpi-dsdt-cpu-hotplug.dsl
src/acpi-dsdt-dbug.dsl
src/acpi-dsdt-hpet.dsl
src/acpi-dsdt-isa.dsl
src/acpi-dsdt-pci-crs.dsl
src/acpi.c
src/acpi.h
src/ssdt-misc.dsl
src/ssdt-pcihp.dsl
src/ssdt-proc.dsl
tools/acpi_extract.py
tools/acpi_extract_preprocess.py
Each one of the listed people agreed to the following:
Quoted 5 lines
If you allow the use of your contribution in QEMU under the terms of GPLv2 or later as proposed by this patch, please respond to this mail including the line:
Acked-by Name <email address>
--- hw/i386/acpi-dsdt-cpu-hotplug.dsl | 93 ++++++++ hw/i386/acpi-dsdt-dbug.dsl | 41 ++++ hw/i386/acpi-dsdt-hpet.dsl | 51 +++++ hw/i386/acpi-dsdt-isa.dsl | 117 ++++++++++ hw/i386/acpi-dsdt-pci-crs.dsl | 105 +++++++++ hw/i386/acpi-dsdt.dsl | 343 ++++++++++++++++++++++++++++ hw/i386/q35-acpi-dsdt.dsl | 452 +++++++++++++++++++++++++++++++++++++ hw/i386/ssdt-misc.dsl | 73 ++++++ hw/i386/ssdt-pcihp.dsl | 51 +++++ hw/i386/ssdt-proc.dsl | 63 ++++++ scripts/acpi_extract.py | 362 +++++++++++++++++++++++++++++ scripts/acpi_extract_preprocess.py | 52 +++++ 12 files changed, 1803 insertions(+) create mode 100644 hw/i386/acpi-dsdt-cpu-hotplug.dsl create mode 100644 hw/i386/acpi-dsdt-dbug.dsl create mode 100644 hw/i386/acpi-dsdt-hpet.dsl create mode 100644 hw/i386/acpi-dsdt-isa.dsl create mode 100644 hw/i386/acpi-dsdt-pci-crs.dsl create mode 100644 hw/i386/acpi-dsdt.dsl create mode 100644 hw/i386/q35-acpi-dsdt.dsl create mode 100644 hw/i386/ssdt-misc.dsl create mode 100644 hw/i386/ssdt-pcihp.dsl create mode 100644 hw/i386/ssdt-proc.dsl create mode 100755 scripts/acpi_extract.py create mode 100755 scripts/acpi_extract_preprocess.py
hw/i386/acpi-dsdt-cpu-hotplug.dsl new file +93 -0
@@ -0,0 +1,93 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + + * You should have received a copy of the GNU General Public License along + * with this program; if not, see <http://www.gnu.org/licenses/>. + */ + +/**************************************************************** + * CPU hotplug + ****************************************************************/ + +Scope(\_SB) { + /* Objects filled in by run-time generated SSDT */ + External(NTFY, MethodObj) + External(CPON, PkgObj) + + /* Methods called by run-time generated SSDT Processor objects */ + Method(CPMA, 1, NotSerialized) { + // _MAT method - create an madt apic buffer + // Arg0 = Processor ID = Local APIC ID + // Local0 = CPON flag for this cpu + Store(DerefOf(Index(CPON, Arg0)), Local0) + // Local1 = Buffer (in madt apic form) to return + Store(Buffer(8) {0x00, 0x08, 0x00, 0x00, 0x00, 0, 0, 0}, Local1) + // Update the processor id, lapic id, and enable/disable status + Store(Arg0, Index(Local1, 2)) + Store(Arg0, Index(Local1, 3)) + Store(Local0, Index(Local1, 4)) + Return (Local1) + } + Method(CPST, 1, NotSerialized) { + // _STA method - return ON status of cpu + // Arg0 = Processor ID = Local APIC ID + // Local0 = CPON flag for this cpu + Store(DerefOf(Index(CPON, Arg0)), Local0) + If (Local0) { + Return (0xF) + } Else { + Return (0x0) + } + } + Method(CPEJ, 2, NotSerialized) { + // _EJ0 method - eject callback + Sleep(200) + } + + /* CPU hotplug notify method */ + OperationRegion(PRST, SystemIO, 0xaf00, 32) + Field(PRST, ByteAcc, NoLock, Preserve) { + PRS, 256 + } + Method(PRSC, 0) { + // Local5 = active cpu bitmap + Store(PRS, Local5) + // Local2 = last read byte from bitmap + Store(Zero, Local2) + // Local0 = Processor ID / APIC ID iterator + Store(Zero, Local0) + While (LLess(Local0, SizeOf(CPON))) { + // Local1 = CPON flag for this cpu + Store(DerefOf(Index(CPON, Local0)), Local1) + If (And(Local0, 0x07)) { + // Shift down previously read bitmap byte + ShiftRight(Local2, 1, Local2) + } Else { + // Read next byte from cpu bitmap + Store(DerefOf(Index(Local5, ShiftRight(Local0, 3))), Local2) + } + // Local3 = active state for this cpu + Store(And(Local2, 1), Local3) + + If (LNotEqual(Local1, Local3)) { + // State change - update CPON with new state + Store(Local3, Index(CPON, Local0)) + // Do CPU notify + If (LEqual(Local3, 1)) { + NTFY(Local0, 1) + } Else { + NTFY(Local0, 3) + } + } + Increment(Local0) + } + } +}
hw/i386/acpi-dsdt-dbug.dsl new file +41 -0
41 lines not on this page · raw message
hw/i386/acpi-dsdt-hpet.dsl new file +51 -0
51 lines not on this page · raw message
hw/i386/acpi-dsdt-isa.dsl new file +117 -0
117 lines not on this page · raw message
hw/i386/acpi-dsdt-pci-crs.dsl new file +105 -0
105 lines not on this page · raw message
hw/i386/acpi-dsdt.dsl new file +343 -0
343 lines not on this page · raw message
hw/i386/q35-acpi-dsdt.dsl new file +452 -0
452 lines not on this page · raw message
hw/i386/ssdt-misc.dsl new file +73 -0
73 lines not on this page · raw message
hw/i386/ssdt-pcihp.dsl new file +51 -0
51 lines not on this page · raw message
hw/i386/ssdt-proc.dsl new file +63 -0
63 lines not on this page · raw message
scripts/acpi_extract.py new file +362 -0
362 lines not on this page · raw message
scripts/acpi_extract_preprocess.py new file +52 -0
52 lines not on this page · raw message
Signature · 1 line
MST
Re: [Qemu-devel] [PATCH v2 repost 2/9] i386: add ACPI table files from seabios
Quoted 74 lines · Michael S. Tsirkin
This adds ASL code as well as scripts for processing it, imported from seabios git tree
commit51684b7ced75fb76776e8ee84833fcfb6ecf12ddWill be used for runtime acpi table generation.
Note:
This patch reuses some code from SeaBIOS, which was originally under LGPLv2 and then relicensed to GPLv3 or LGPLv3, in QEMU under GPLv2+. This relicensing has been acked by all contributors that had contributed to the code since thev2->v3relicense. ACKs approving the v2+ relicensing are listed below. The list might include ACKs from people not holding copyright on any parts of the reused code, but it's better to err on the side of caution and include them.Affected SeaBIOS files (GPLv2+ license headers added)
<http://thread.gmane.org/gmane.comp.bios.coreboot.seabios/5949>:src/acpi-dsdt-cpu-hotplug.dsl
src/acpi-dsdt-dbug.dsl
src/acpi-dsdt-hpet.dsl
src/acpi-dsdt-isa.dsl
src/acpi-dsdt-pci-crs.dsl
src/acpi.c
src/acpi.h
src/ssdt-misc.dsl
src/ssdt-pcihp.dsl
src/ssdt-proc.dsl
tools/acpi_extract.py
tools/acpi_extract_preprocess.pyEach one of the listed people agreed to the following:
Quoted 5 lines
If you allow the use of your contribution in QEMU under the terms of GPLv2 or later as proposed by this patch, please respond to this mail including the line:
Acked-by Name <email address>Acked-by Gerd Hoffmann <[email protected]>Acked-by Jan Kiszka <[email protected]>Acked-by Jason Baron <[email protected]>Acked-by David Woodhouse <[email protected]>Acked-by Gleb Natapov <[email protected]>Acked-by Marcelo Tosatti <[email protected]>Acked-by Dave Frodin <[email protected]>Acked-by Paolo Bonzini <[email protected]>Acked-by Kevin O'Connor <[email protected]>Acked-by Laszlo Ersek <[email protected]>Acked-by Kenji Kaneshige <[email protected]>Acked-by Isaku Yamahata <[email protected]>Acked-by Hu Tao <[email protected]>Acked-by Eduardo Habkost <[email protected]>Signed-off-by Michael S. Tsirkin <[email protected]>--- hw/i386/acpi-dsdt-cpu-hotplug.dsl | 93 ++++++++ hw/i386/acpi-dsdt-dbug.dsl | 41 ++++ hw/i386/acpi-dsdt-hpet.dsl | 51 +++++ hw/i386/acpi-dsdt-isa.dsl | 117 ++++++++++ hw/i386/acpi-dsdt-pci-crs.dsl | 105 +++++++++ hw/i386/acpi-dsdt.dsl | 343 ++++++++++++++++++++++++++++ hw/i386/q35-acpi-dsdt.dsl | 452 +++++++++++++++++++++++++++++++++++++ hw/i386/ssdt-misc.dsl | 73 ++++++ hw/i386/ssdt-pcihp.dsl | 51 +++++ hw/i386/ssdt-proc.dsl | 63 ++++++ scripts/acpi_extract.py | 362 +++++++++++++++++++++++++++++ scripts/acpi_extract_preprocess.py | 52 +++++ 12 files changed, 1803 insertions(+) create mode 100644 hw/i386/acpi-dsdt-cpu-hotplug.dsl create mode 100644 hw/i386/acpi-dsdt-dbug.dsl create mode 100644 hw/i386/acpi-dsdt-hpet.dsl create mode 100644 hw/i386/acpi-dsdt-isa.dsl
Quoted 8 lines
create mode 100644 hw/i386/acpi-dsdt-pci-crs.dsl create mode 100644 hw/i386/acpi-dsdt.dsl create mode 100644 hw/i386/q35-acpi-dsdt.dsl create mode 100644 hw/i386/ssdt-misc.dsl create mode 100644 hw/i386/ssdt-pcihp.dsl create mode 100644 hw/i386/ssdt-proc.dsl create mode 100755 scripts/acpi_extract.py create mode 100755 scripts/acpi_extract_preprocess.py
Re: [Qemu-devel] [PATCH v2 repost 2/9] i386: add ACPI table files from seabios
In reply to Michael S. TsirkinOn Wed, Jul 10, 2013 at 04:51:38PM +0300, Michael S. Tsirkin wrote:
<...>
Quoted 68 lines
hw/i386/ssdt-misc.dsl new file +62
-0@@ -0,0 +1,73 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + + * You should have received a copy of the GNU General Public License along + * with this program; if not, see <http://www.gnu.org/licenses/>. + */ + +ACPI_EXTRACT_ALL_CODE ssdp_misc_aml + +DefinitionBlock ("ssdt-misc.aml", "SSDT", 0x01, "BXPC", "BXSSDTSUSP", 0x1) +{ + +/**************************************************************** + * PCI memory ranges + ****************************************************************/ + + Scope(\) { + ACPI_EXTRACT_NAME_DWORD_CONST acpi_pci32_start + Name(P0S, 0x12345678) + ACPI_EXTRACT_NAME_DWORD_CONST acpi_pci32_end + Name(P0E, 0x12345678) + ACPI_EXTRACT_NAME_BYTE_CONST acpi_pci64_valid + Name(P1V, 0x12) + ACPI_EXTRACT_NAME_BUFFER8 acpi_pci64_start + Name(P1S, Buffer() { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }) + ACPI_EXTRACT_NAME_BUFFER8 acpi_pci64_end + Name(P1E, Buffer() { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }) + ACPI_EXTRACT_NAME_BUFFER8 acpi_pci64_length + Name(P1L, Buffer() { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }) + } + + +/**************************************************************** + * Suspend + ****************************************************************/ + + Scope(\) { + /* + * S3 (suspend-to-ram), S4 (suspend-to-disk) and S5 (power-off) type codes: + * must match piix4 emulation. + */ + + ACPI_EXTRACT_NAME_STRING acpi_s3_name + Name(_S3, Package(0x04) { + One, /* PM1a_CNT.SLP_TYP */ + One, /* PM1b_CNT.SLP_TYP */ + Zero, /* reserved */ + Zero /* reserved */ + }) + ACPI_EXTRACT_NAME_STRING acpi_s4_name + ACPI_EXTRACT_PKG_START acpi_s4_pkg + Name(_S4, Package(0x04) { + 0x2, /* PM1a_CNT.SLP_TYP */ + 0x2, /* PM1b_CNT.SLP_TYP */
hw/i386/ssdt-misc.dsl line 72
Quoted 10 lines
hw/i386/ssdt-misc.dsl new file +10
-0+ Zero, /* reserved */ + Zero /* reserved */ + }) + Name(_S5, Package(0x04) { + Zero, /* PM1a_CNT.SLP_TYP */ + Zero, /* PM1b_CNT.SLP_TYP */ + Zero, /* reserved */ + Zero /* reserved */ + }) + }
Device(PEVT) is lost here, but added back in patch 9/9.
Quoted 1 line
hw/i386/ssdt-misc.dsl new file +1
-0+}
<...>
Quoted 15 lines
scripts/acpi_extract.py new file +9
-0@@ -0,0 +1,362 @@ +#!/usr/bin/python +# Copyright (C) 2011 Red Hat, Inc., Michael S. Tsirkin <[email protected]> +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful,
scripts/acpi_extract.py line 19
Quoted 10 lines
scripts/acpi_extract.py new file +10
-0+# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License along +# with this program; if not, see <http://www.gnu.org/licenses/>. + +# Process mixed ASL/AML listing (.lst file) produced by iasl -l +# Locate and execute ACPI_EXTRACT directives, output offset info +#
Trailing space here,
scripts/acpi_extract.py line 21
Quoted 2 lines
scripts/acpi_extract.py new file +2
-0+# Documentation of ACPI_EXTRACT_* directive tags: +#
here,
scripts/acpi_extract.py line 29
Quoted 8 lines
scripts/acpi_extract.py new file +8
-0+# These directive tags output offset information from AML for BIOS runtime +# table generation. +# Each directive is of the form: +# ACPI_EXTRACT_<TYPE> <array_name> <Operator> (...) +# and causes the extractor to create an array +# named <array_name> with offset, in the generated AML, +# of an object of a given type in the following <Operator>. +#
here,
scripts/acpi_extract.py line 31
Quoted 2 lines
scripts/acpi_extract.py new file +2
-0+# A directive must fit on a single code line. +#
here,
scripts/acpi_extract.py line 33
Quoted 2 lines
scripts/acpi_extract.py new file +2
-0+# Object type in AML is verified, a mismatch causes a build failure. +#
here,
scripts/acpi_extract.py line 46
Quoted 13 lines
scripts/acpi_extract.py new file +13
-0+# Directives and operators currently supported are: +# ACPI_EXTRACT_NAME_DWORD_CONST - extract a Dword Const object from Name() +# ACPI_EXTRACT_NAME_WORD_CONST - extract a Word Const object from Name() +# ACPI_EXTRACT_NAME_BYTE_CONST - extract a Byte Const object from Name() +# ACPI_EXTRACT_METHOD_STRING - extract a NameString from Method() +# ACPI_EXTRACT_NAME_STRING - extract a NameString from Name() +# ACPI_EXTRACT_PROCESSOR_START - start of Processor() block +# ACPI_EXTRACT_PROCESSOR_STRING - extract a NameString from Processor() +# ACPI_EXTRACT_PROCESSOR_END - offset at last byte of Processor() + 1 +# ACPI_EXTRACT_PKG_START - start of Package block +# +# ACPI_EXTRACT_ALL_CODE - create an array storing the generated AML bytecode +#
here,
Quoted 10 lines
scripts/acpi_extract.py new file +10
-0+# ACPI_EXTRACT is not allowed anywhere else in code, except in comments. + +import re; +import sys; +import fileinput; + +aml = [] +asl = [] +output = {} +debug = ""
scripts/acpi_extract.py line 66
Quoted 10 lines
scripts/acpi_extract.py new file +10
-0+ +class asl_line: + line = None + lineno = None + aml_offset = None + +def die(diag): + sys.stderr.write("Error: %s; %s\n" % (diag, debug)) + sys.exit(1) +
and here.
scripts/acpi_extract.py line 73
Quoted 7 lines
scripts/acpi_extract.py new file +7
-0+#Store an ASL command, matching AML offset, and input line (for debugging) +def add_asl(lineno, line): + l = asl_line() + l.line = line + l.lineno = lineno + l.aml_offset = len(aml) + asl.append(l)
<...>
Otherwise,
Re: [Qemu-devel] [PATCH v2 repost 2/9] i386: add ACPI table files from seabios
Quoted 3 lines · Hu Tao
Otherwise,
Reviewed-by Hu Tao <[email protected]>
Thanks for the detailed review, I'll address your comments in the next revision.
PATCH v2 3/9 acpi: add rules to compile ASL source
In reply to Michael S. TsirkinDetect presence of IASL compiler and use it to process ASL source. If not there, use pre-compiled files in-tree. Add script to update the in-tree files.
--- configure | 9 ++++++++- hw/i386/Makefile.objs | 22 ++++++++++++++++++++++ scripts/update-acpi.sh | 4 ++++ 3 files changed, 34 insertions(+), 1 deletion(-) create mode 100644 scripts/update-acpi.sh
configure +8 -1
@@ -119,6 +119,7 @@ path_of() { # default parameters source_path=`dirname "$0"` cpu="" +iasl="iasl" interp_prefix="/usr/gnemul/qemu-%M" static="no" cross_prefix=""
@@ -251,6 +252,8 @@ for opt do ;; --cc=*) CC="$optarg" ;; + --iasl=*) iasl="$optarg" + ;; --source-path=*) source_path="$optarg" ;; --cpu=*) cpu="$optarg"
@@ -1020,6 +1023,7 @@ echo "Advanced options (experts only):" echo " --source-path=PATH path of source code [$source_path]" echo " --cross-prefix=PREFIX use PREFIX for compile tools [$cross_prefix]" echo " --cc=CC use C compiler CC [$cc]" +echo " --iasl=IASL use ACPI compiler IASL [$iasl]" echo " --host-cc=CC use C compiler CC [$host_cc] for code run at" echo " build time" echo " --objcc=OBJCC use Objective-C compiler OBJCC [$objcc]"
@@ -4037,6 +4041,9 @@ else fi echo "PYTHON=$python" >> $config_host_mak echo "CC=$cc" >> $config_host_mak +if $iasl -h > /dev/null 2>&1; then + echo "IASL=$iasl" >> $config_host_mak +fi echo "CC_I386=$cc_i386" >> $config_host_mak echo "HOST_CC=$host_cc" >> $config_host_mak echo "OBJCC=$objcc" >> $config_host_mak
@@ -4509,7 +4516,7 @@ for rom in seabios vgabios ; do echo "BCC=bcc" >> $config_mak echo "CPP=$cpp" >> $config_mak echo "OBJCOPY=objcopy" >> $config_mak - echo "IASL=iasl" >> $config_mak + echo "IASL=$iasl" >> $config_mak echo "LD=$ld" >> $config_mak done
hw/i386/Makefile.objs +22 -0
@@ -4,3 +4,25 @@ obj-y += pc.o pc_piix.o pc_q35.o obj-$(CONFIG_XEN) += xen_domainbuild.o xen_machine_pv.o obj-y += kvmvapic.o + +iasl-option=$(shell if test -z "`$(1) $(2) 2>&1 > /dev/null`" \ + ; then echo "$(2)"; else echo "$(3)"; fi ;) + +ifdef IASL +#IASL Present. Generate hex files from .dsl +hw/i386/%.hex: $(SRC_PATH)/hw/i386/%.dsl $(SRC_PATH)/scripts/acpi_extract_preprocess.py $(SRC_PATH)/scripts/acpi_extract.py + $(call quiet-command, cpp -P $< -o $*.dsl.i.orig, " CPP $(TARGET_DIR)$*.dsl.i.orig") + $(call quiet-command, $(PYTHON) $(SRC_PATH)/scripts/acpi_extract_preprocess.py $*.dsl.i.orig > $*.dsl.i, " ACPI_PREPROCESS $(TARGET_DIR)$*.dsl.i") + $(call quiet-command, $(IASL) $(call iasl-option,$(IASL),-Pn,) -vs -l -tc -p $* $*.dsl.i $(if $(V), , > /dev/null) 2>&1 ," IASL $(TARGET_DIR)$*.dsl.i") + $(call quiet-command, $(SRC_PATH)/scripts/acpi_extract.py $*.lst > $*.off, " ACPI_EXTRACT $(TARGET_DIR)$*.off") + $(call quiet-command, cat $*.off > $@, " CAT $(TARGET_DIR)$@") +else +#IASL Not present. Restore pre-generated hex files. +hw/i386/%.hex: $(SRC_PATH)/hw/i386/%.hex.generated + $(call quiet-command, cp -f $< $@, " CP $(TARGET_DIR)$@") +endif + +.PHONY: cleanhex +cleanhex: + rm -f hw/i386/*hex +clean: cleanhex
scripts/update-acpi.sh new file +4 -0
@@ -0,0 +1,4 @@ +cd x86_64-softmmu +for file in hw/i386/*.hex; do + cp -f $file ../$file.generated +done
Signature · 1 line
MST
Re: [Qemu-devel] [PATCH v2 repost 3/9] acpi: add rules to compile ASL source
Quoted 97 lines · Michael S. Tsirkin
Detect presence of IASL compiler and use it to process ASL source. If not there, use pre-compiled files in-tree. Add script to update the in-tree files.
Signed-off-by Michael S. Tsirkin <[email protected]>--- configure | 9 ++++++++- hw/i386/Makefile.objs | 22 ++++++++++++++++++++++ scripts/update-acpi.sh | 4 ++++ 3 files changed, 34 insertions(+), 1 deletion(-) create mode 100644 scripts/update-acpi.shconfigure +8
-1@@ -119,6 +119,7 @@ path_of() { # default parameters source_path=`dirname "$0"` cpu="" +iasl="iasl" interp_prefix="/usr/gnemul/qemu-%M" static="no" cross_prefix=""@@ -251,6 +252,8 @@ for opt do ;; --cc=*) CC="$optarg" ;; + --iasl=*) iasl="$optarg" + ;; --source-path=*) source_path="$optarg" ;; --cpu=*) cpu="$optarg"@@ -1020,6 +1023,7 @@ echo "Advanced options (experts only):" echo " --source-path=PATH path of source code [$source_path]" echo " --cross-prefix=PREFIX use PREFIX for compile tools [$cross_prefix]" echo " --cc=CC use C compiler CC [$cc]" +echo " --iasl=IASL use ACPI compiler IASL [$iasl]" echo " --host-cc=CC use C compiler CC [$host_cc] for code run at" echo " build time" echo " --objcc=OBJCC use Objective-C compiler OBJCC [$objcc]"@@ -4037,6 +4041,9 @@ else fi echo "PYTHON=$python" >> $config_host_mak echo "CC=$cc" >> $config_host_mak +if $iasl -h > /dev/null 2>&1; then + echo "IASL=$iasl" >> $config_host_mak +fi echo "CC_I386=$cc_i386" >> $config_host_mak echo "HOST_CC=$host_cc" >> $config_host_mak echo "OBJCC=$objcc" >> $config_host_mak@@ -4509,7 +4516,7 @@ for rom in seabios vgabios ; do echo "BCC=bcc" >> $config_mak echo "CPP=$cpp" >> $config_mak echo "OBJCOPY=objcopy" >> $config_mak - echo "IASL=iasl" >> $config_mak + echo "IASL=$iasl" >> $config_mak echo "LD=$ld" >> $config_mak donehw/i386/Makefile.objs +22
-0@@ -4,3 +4,25 @@ obj-y += pc.o pc_piix.o pc_q35.o obj-$(CONFIG_XEN) += xen_domainbuild.o xen_machine_pv.o obj-y += kvmvapic.o + +iasl-option=$(shell if test -z "`$(1) $(2) 2>&1 > /dev/null`" \ + ; then echo "$(2)"; else echo "$(3)"; fi ;) + +ifdef IASL +#IASL Present. Generate hex files from .dsl +hw/i386/%.hex: $(SRC_PATH)/hw/i386/%.dsl $(SRC_PATH)/scripts/acpi_extract_preprocess.py $(SRC_PATH)/scripts/acpi_extract.py + $(call quiet-command, cpp -P $< -o $*.dsl.i.orig, " CPP $(TARGET_DIR)$*.dsl.i.orig") + $(call quiet-command, $(PYTHON) $(SRC_PATH)/scripts/acpi_extract_preprocess.py $*.dsl.i.orig > $*.dsl.i, " ACPI_PREPROCESS $(TARGET_DIR)$*.dsl.i") + $(call quiet-command, $(IASL) $(call iasl-option,$(IASL),-Pn,) -vs -l -tc -p $* $*.dsl.i $(if $(V), , > /dev/null) 2>&1 ," IASL $(TARGET_DIR)$*.dsl.i") + $(call quiet-command, $(SRC_PATH)/scripts/acpi_extract.py $*.lst > $*.off, " ACPI_EXTRACT $(TARGET_DIR)$*.off") + $(call quiet-command, cat $*.off > $@, " CAT $(TARGET_DIR)$@") +else +#IASL Not present. Restore pre-generated hex files. +hw/i386/%.hex: $(SRC_PATH)/hw/i386/%.hex.generated + $(call quiet-command, cp -f $< $@, " CP $(TARGET_DIR)$@") +endif + +.PHONY: cleanhex +cleanhex: + rm -f hw/i386/*hex +clean: cleanhexscripts/update-acpi.sh new file +0
-0
scripts/update-acpi.sh line 4
Quoted 4 lines
scripts/update-acpi.sh new file +4
-0@@ -0,0 +1,4 @@ +cd x86_64-softmmu +for file in hw/i386/*.hex; do + cp -f $file ../$file.generated +done
I think:
- this patch (3/9) should be swapped with the next one (4/9), so that the pre-generated files are available earlier than the build code potentially relying on them,
- the "iasl-option" trick should be moved to ./configure perhaps.
Patches 1 & 2 look OK to me.
Laszlo
Laszlo Ersek
Reviewed-byRe: [Qemu-devel] [PATCH v2 repost 3/9] acpi: add rules to compile ASL source
Quoted 14 lines · Laszlo Ersek
Quoted 11 lines · Michael S. Tsirkin
Detect presence of IASL compiler and use it to process ASL source. If not there, use pre-compiled files in-tree. Add script to update the in-tree files.
Signed-off-by Michael S. Tsirkin <[email protected]>--- configure | 9 ++++++++- hw/i386/Makefile.objs | 22 ++++++++++++++++++++++ scripts/update-acpi.sh | 4 ++++ 3 files changed, 34 insertions(+), 1 deletion(-) create mode 100644 scripts/update-acpi.sh
Quoted 5 lines
I think:
- this patch (3/9) should be swapped with the next one (4/9), so that the pre-generated files are available earlier than the build code potentially relying on them,
- the "iasl-option" trick should be moved to ./configure perhaps.
anyway
Re: [Qemu-devel] [PATCH v2 repost 3/9] acpi: add rules to compile ASL source
In reply to Laszlo ErsekQuoted 99 lines · Laszlo Ersek
Quoted 98 lines · Michael S. Tsirkin
Detect presence of IASL compiler and use it to process ASL source. If not there, use pre-compiled files in-tree. Add script to update the in-tree files.
Signed-off-by Michael S. Tsirkin <[email protected]>--- configure | 9 ++++++++- hw/i386/Makefile.objs | 22 ++++++++++++++++++++++ scripts/update-acpi.sh | 4 ++++ 3 files changed, 34 insertions(+), 1 deletion(-) create mode 100644 scripts/update-acpi.shconfigure +8
-1@@ -119,6 +119,7 @@ path_of() { # default parameters source_path=`dirname "$0"` cpu="" +iasl="iasl" interp_prefix="/usr/gnemul/qemu-%M" static="no" cross_prefix=""@@ -251,6 +252,8 @@ for opt do ;; --cc=*) CC="$optarg" ;; + --iasl=*) iasl="$optarg" + ;; --source-path=*) source_path="$optarg" ;; --cpu=*) cpu="$optarg"@@ -1020,6 +1023,7 @@ echo "Advanced options (experts only):" echo " --source-path=PATH path of source code [$source_path]" echo " --cross-prefix=PREFIX use PREFIX for compile tools [$cross_prefix]" echo " --cc=CC use C compiler CC [$cc]" +echo " --iasl=IASL use ACPI compiler IASL [$iasl]" echo " --host-cc=CC use C compiler CC [$host_cc] for code run at" echo " build time" echo " --objcc=OBJCC use Objective-C compiler OBJCC [$objcc]"@@ -4037,6 +4041,9 @@ else fi echo "PYTHON=$python" >> $config_host_mak echo "CC=$cc" >> $config_host_mak +if $iasl -h > /dev/null 2>&1; then + echo "IASL=$iasl" >> $config_host_mak +fi echo "CC_I386=$cc_i386" >> $config_host_mak echo "HOST_CC=$host_cc" >> $config_host_mak echo "OBJCC=$objcc" >> $config_host_mak@@ -4509,7 +4516,7 @@ for rom in seabios vgabios ; do echo "BCC=bcc" >> $config_mak echo "CPP=$cpp" >> $config_mak echo "OBJCOPY=objcopy" >> $config_mak - echo "IASL=iasl" >> $config_mak + echo "IASL=$iasl" >> $config_mak echo "LD=$ld" >> $config_mak donehw/i386/Makefile.objs +22
-0@@ -4,3 +4,25 @@ obj-y += pc.o pc_piix.o pc_q35.o obj-$(CONFIG_XEN) += xen_domainbuild.o xen_machine_pv.o obj-y += kvmvapic.o + +iasl-option=$(shell if test -z "`$(1) $(2) 2>&1 > /dev/null`" \ + ; then echo "$(2)"; else echo "$(3)"; fi ;) + +ifdef IASL +#IASL Present. Generate hex files from .dsl +hw/i386/%.hex: $(SRC_PATH)/hw/i386/%.dsl $(SRC_PATH)/scripts/acpi_extract_preprocess.py $(SRC_PATH)/scripts/acpi_extract.py + $(call quiet-command, cpp -P $< -o $*.dsl.i.orig, " CPP $(TARGET_DIR)$*.dsl.i.orig") + $(call quiet-command, $(PYTHON) $(SRC_PATH)/scripts/acpi_extract_preprocess.py $*.dsl.i.orig > $*.dsl.i, " ACPI_PREPROCESS $(TARGET_DIR)$*.dsl.i") + $(call quiet-command, $(IASL) $(call iasl-option,$(IASL),-Pn,) -vs -l -tc -p $* $*.dsl.i $(if $(V), , > /dev/null) 2>&1 ," IASL $(TARGET_DIR)$*.dsl.i") + $(call quiet-command, $(SRC_PATH)/scripts/acpi_extract.py $*.lst > $*.off, " ACPI_EXTRACT $(TARGET_DIR)$*.off") + $(call quiet-command, cat $*.off > $@, " CAT $(TARGET_DIR)$@") +else +#IASL Not present. Restore pre-generated hex files. +hw/i386/%.hex: $(SRC_PATH)/hw/i386/%.hex.generated + $(call quiet-command, cp -f $< $@, " CP $(TARGET_DIR)$@") +endif + +.PHONY: cleanhex +cleanhex: + rm -f hw/i386/*hex +clean: cleanhexscripts/update-acpi.sh new file +2
-0@@ -0,0 +1,4 @@ +cd x86_64-softmmu +for file in hw/i386/*.hex; do
Quoted 8 lines
scripts/update-acpi.sh line 4
Quoted 3 lines
scripts/update-acpi.sh new file +2
-0+ cp -f $file ../$file.generated +doneI think:
- this patch (3/9) should be swapped with the next one (4/9), so that the pre-generated files are available earlier than the build code potentially relying on them,
they are only added to build later, with patch 5, so it should not matter.
Quoted 1 line
- the "iasl-option" trick should be moved to ./configure perhaps.
I prefer makefile since distros can update iasl silently, and you generally won't know that you need to re-run configure.
Quoted 3 lines
Patches 1 & 2 look OK to me.
Laszlo
Re: [Qemu-devel] [PATCH v2 repost 3/9] acpi: add rules to compile ASL source
In reply to Michael S. TsirkinQuoted 3 lines · Michael S. Tsirkin
Detect presence of IASL compiler and use it to process ASL source. If not there, use pre-compiled files in-tree. Add script to update the in-tree files.
Do you want to check for iasl version for now? See:
http://www.seabios.org/pipermail/seabios/2013-May/006188.html
Re: [Qemu-devel] [PATCH v2 repost 3/9] acpi: add rules to compile ASL source
Quoted 7 lines · Hu Tao
Quoted 3 lines · Michael S. Tsirkin
Detect presence of IASL compiler and use it to process ASL source. If not there, use pre-compiled files in-tree. Add script to update the in-tree files.
Do you want to check for iasl version for now? See:
http://www.seabios.org/pipermail/seabios/2013-May/006188.html
This patch does this in the makefile (same as seabios does), this is just in case a distro updates iasl versions.
PATCH v2 4/9 acpi: pre-compiled ASL files
In reply to Michael S. TsirkinAdd pre-compiled ASL files. Useful for systems that do not have IASL.
--- hw/i386/acpi-dsdt.hex.generated | 4409 +++++++++++++++++++++ hw/i386/q35-acpi-dsdt.hex.generated | 7346 +++++++++++++++++++++++++++++++++++ hw/i386/ssdt-misc.hex.generated | 190 + hw/i386/ssdt-pcihp.hex.generated | 108 + hw/i386/ssdt-proc.hex.generated | 134 + 5 files changed, 12187 insertions(+) create mode 100644 hw/i386/acpi-dsdt.hex.generated create mode 100644 hw/i386/q35-acpi-dsdt.hex.generated create mode 100644 hw/i386/ssdt-misc.hex.generated create mode 100644 hw/i386/ssdt-pcihp.hex.generated create mode 100644 hw/i386/ssdt-proc.hex.generated
hw/i386/acpi-dsdt.hex.generated new file +4409 -0
@@ -0,0 +1,4409 @@ +static unsigned char AcpiDsdtAmlCode[] = { +0x44, +0x53, +0x44, +0x54, +0x37, +0x11, +0x0, +0x0, +0x1, +0xe1, +0x42, +0x58, +0x50, +0x43, +0x0, +0x0, +0x42, +0x58, +0x44, +0x53, +0x44, +0x54, +0x0, +0x0, +0x1, +0x0, +0x0, +0x0, +0x49, +0x4e, +0x54, +0x4c, +0x28, +0x5, +0x10, +0x20, +0x10, +0x49, +0x4, +0x5c, +0x0, +0x5b, +0x80, +0x44, +0x42, +0x47, +0x5f, +0x1, +0xb, +0x2, +0x4, +0x1, +0x5b, +0x81, +0xb, +0x44, +0x42, +0x47, +0x5f, +0x1, +0x44, +0x42, +0x47, +0x42, +0x8, +0x14, +0x2c, +0x44, +0x42, +0x55, +0x47, +0x1, +0x98, +0x68, +0x60, +0x96, +0x60, +0x60, +0x74, +0x87, +0x60, +0x1, +0x61, +0x70, +0x0, +0x62, +0xa2, +0x10, +0x95, +0x62, +0x61, +0x70, +0x83, +0x88, +0x60, +0x62, +0x0, +0x44, +0x42, +0x47, +0x42, +0x75, +0x62, +0x70, +0xa, +0xa, +0x44, +0x42, +0x47, +0x42, +0x10, +0x22, +0x5f, +0x53, +0x42, +0x5f, +0x5b, +0x82, +0x1b, +0x50, +0x43, +0x49, +0x30, +0x8, +0x5f, +0x48, +0x49, +0x44, +0xc, +0x41, +0xd0, +0xa, +0x3, +0x8, +0x5f, +0x41, +0x44, +0x52, +0x0, +0x8, +0x5f, +0x55, +0x49, +0x44, +0x1, +0x10, +0x4e, +0x15, +0x2e, +0x5f, +0x53, +0x42, +0x5f, +0x50, +0x43, +0x49, +0x30, +0x8, +0x43, +0x52, +0x45, +0x53, +0x11, +0x42, +0x7, +0xa, +0x6e, +0x88, +0xd, +0x0, +0x2, +0xc, +0x0, +0x0, +0x0, +0x0, +0x0, +0xff, +0x0, +0x0, +0x0, +0x0, +0x1, +0x47, +0x1, +0xf8, +0xc, +0xf8, +0xc, +0x1, +0x8, +0x88, +0xd, +0x0, +0x1, +0xc, +0x3, +0x0, +0x0, +0x0, +0x0, +0xf7, +0xc, +0x0, +0x0, +0xf8, +0xc, +0x88, +0xd, +0x0, +0x1, +0xc, +0x3, +0x0, +0x0, +0x0, +0xd, +0xff, +0xff, +0x0, +0x0, +0x0, +0xf3, +0x87, +0x17, +0x0, +0x0, +0xc, +0x3, +0x0, +0x0, +0x0, +0x0, +0x0, +0x0, +0xa, +0x0, +0xff, +0xff, +0xb, +0x0, +0x0, +0x0, +0x0, +0x0, +0x0, +0x0, +0x2, +0x0, +0x87, +0x17, +0x0, +0x0, +0xc, +0x1, +0x0, +0x0, +0x0, +0x0, +0x0, +0x0, +0x0, +0xe0, +0xff, +0xff, +0xbf, +0xfe, +0x0, +0x0, +0x0, +0x0, +0x0, +0x0, +0xc0, +0x1e, +0x79, +0x0, +0x8, +0x43, +0x52, +0x36, +0x34, +0x11, +0x33, +0xa, +0x30, +0x8a, +0x2b, +0x0, +0x0, +0xc, +0x3, +0x0, +0x0, +0x0, +0x0, +0x0, +0x0, +0x0, +0x0, +0x0, +0x0, +0x0, +0x0, +0x80, +0x0, +0x0, +0x0, +0xff, +0xff, +0xff, +0xff, +0xff, +0x0, +0x0, +0x0, +0x0, +0x0, +0x0, +0x0, +0x0, +0x0, +0x0, +0x0, +0x0, +0x0, +0x0, +0x0, +0x80, +0x0, +0x0, +0x0, +0x79, +0x0, +0x14, +0x41, +0xa, +0x5f, +0x43, +0x52, +0x53, +0x0, +0x8a, +0x43, +0x52, +0x45, +0x53, +0xa, +0x5c, +0x50, +0x53, +0x33, +0x32, +0x8a, +0x43, +0x52, +0x45, +0x53, +0xa, +0x60, +0x50, +0x45, +0x33, +0x32, +0x8a, +0x43, +0x52, +0x45, +0x53, +0xa, +0x68, +0x50, +0x4c, +0x33, +0x32, +0x70, +0x50, +0x30, +0x53, +0x5f, +0x50, +0x53, +0x33, +0x32, +0x70, +0x50, +0x30, +0x45, +0x5f, +0x50, +0x45, +0x33, +0x32, +0x70, +0x72, +0x74, +0x50, +0x30, +0x45, +0x5f, +0x50, +0x30, +0x53, +0x5f, +0x0, +0x1, +0x0, +0x50, +0x4c, +0x33, +0x32, +0xa0, +0xc, +0x93, +0x50, +0x31, +0x56, +0x5f, +0x0, +0xa4, +0x43, +0x52, +0x45, +0x53, +0x8f, +0x43, +0x52, +0x36, +0x34, +0xa, +0xe, +0x50, +0x53, +0x36, +0x34, +0x8f, +0x43, +0x52, +0x36, +0x34, +0xa, +0x16, +0x50, +0x45, +0x36, +0x34, +0x8f, +0x43, +0x52, +0x36, +0x34, +0xa, +0x26, +0x50, +0x4c, +0x36, +0x34, +0x70, +0x50, +0x31, +0x53, +0x5f, +0x50, +0x53, +0x36, +0x34, +0x70, +0x50, +0x31, +0x45, +0x5f, +0x50, +0x45, +0x36, +0x34, +0x70, +0x50, +0x31, +0x4c, +0x5f, +0x50, +0x4c, +0x36, +0x34, +0x84, +0x43, +0x52, +0x45, +0x53, +0x43, +0x52, +0x36, +0x34, +0x60, +0xa4, +0x60, +0x10, +0x4d, +0x8, +0x5f, +0x53, +0x42, +0x5f, +0x5b, +0x82, +0x45, +0x8, +0x48, +0x50, +0x45, +0x54, +0x8, +0x5f, +0x48, +0x49, +0x44, +0xc, +0x41, +0xd0, +0x1, +0x3, +0x8, +0x5f, +0x55, +0x49, +0x44, +0x0, +0x5b, +0x80, +0x48, +0x50, +0x54, +0x4d, +0x0, +0xc, +0x0, +0x0, +0xd0, +0xfe, +0xb, +0x0, +0x4, +0x5b, +0x81, +0x10, +0x48, +0x50, +0x54, +0x4d, +0x13, +0x56, +0x45, +0x4e, +0x44, +0x20, +0x50, +0x52, +0x44, +0x5f, +0x20, +0x14, +0x36, +0x5f, +0x53, +0x54, +0x41, +0x0, +0x70, +0x56, +0x45, +0x4e, +0x44, +0x60, +0x70, +0x50, +0x52, +0x44, +0x5f, +0x61, +0x7a, +0x60, +0xa, +0x10, +0x60, +0xa0, +0xc, +0x91, +0x93, +0x60, +0x0, +0x93, +0x60, +0xb, +0xff, +0xff, +0xa4, +0x0, +0xa0, +0xe, +0x91, +0x93, +0x61, +0x0, +0x94, +0x61, +0xc, +0x0, +0xe1, +0xf5, +0x5, +0xa4, +0x0, +0xa4, +0xa, +0xf, +0x8, +0x5f, +0x43, +0x52, +0x53, +0x11, +0x11, +0xa, +0xe, +0x86, +0x9, +0x0, +0x0, +0x0, +0x0, +0xd0, +0xfe, +0x0, +0x4, +0x0, +0x0, +0x79, +0x0, +0x10, +0x40, +0x6, +0x2e, +0x5f, +0x53, +0x42, +0x5f, +0x50, +0x43, +0x49, +0x30, +0x5b, +0x82, +0x43, +0x5, +0x56, +0x47, +0x41, +0x5f, +0x8, +0x5f, +0x41, +0x44, +0x52, +0xc, +0x0, +0x0, +0x2, +0x0, +0x5b, +0x80, +0x50, +0x43, +0x49, +0x43, +0x2, +0x0, +0xa, +0x4, +0x5b, +0x81, +0xb, +0x50, +0x43, +0x49, +0x43, +0x3, +0x56, +0x45, +0x4e, +0x44, +0x20, +0x14, +0x8, +0x5f, +0x53, +0x31, +0x44, +0x0, +0xa4, +0x0, +0x14, +0x8, +0x5f, +0x53, +0x32, +0x44, +0x0, +0xa4, +0x0, +0x14, +0x19, +0x5f, +0x53, +0x33, +0x44, +0x0, +0xa0, +0xe, +0x93, +0x56, +0x45, +0x4e, +0x44, +0xc, +0x36, +0x1b, +0x0, +0x1, +0xa4, +0xa, +0x3, +0xa1, +0x3, +0xa4, +0x0, +0x10, +0x25, +0x2e, +0x5f, +0x53, +0x42, +0x5f, +0x50, +0x43, +0x49, +0x30, +0x5b, +0x82, +0x19, +0x50, +0x58, +0x31, +0x33, +0x8, +0x5f, +0x41, +0x44, +0x52, +0xc, +0x3, +0x0, +0x1, +0x0, +0x5b, +0x80, +0x50, +0x31, +0x33, +0x43, +0x2, +0x0, +0xa, +0xff, +0x10, +0x46, +0x5, +0x2e, +0x5f, +0x53, +0x42, +0x5f, +0x50, +0x43, +0x49, +0x30, +0x5b, +0x82, +0x49, +0x4, +0x49, +0x53, +0x41, +0x5f, +0x8, +0x5f, +0x41, +0x44, +0x52, +0xc, +0x0, +0x0, +0x1, +0x0, +0x5b, +0x80, +0x50, +0x34, +0x30, +0x43, +0x2, +0xa, +0x60, +0xa, +0x4, +0x5b, +0x81, +0x26, +0x5e, +0x2e, +0x50, +0x58, +0x31, +0x33, +0x50, +0x31, +0x33, +0x43, +0x0, +0x0, +0x48, +0x2f, +0x0, +0x7, +0x4c, +0x50, +0x45, +0x4e, +0x1, +0x0, +0x38, +0x0, +0x3, +0x43, +0x41, +0x45, +0x4e, +0x1, +0x0, +0x3, +0x43, +0x42, +0x45, +0x4e, +0x1, +0x8, +0x46, +0x44, +0x45, +0x4e, +0x1, +0x10, +0x4c, +0x1b, +0x2f, +0x3, +0x5f, +0x53, +0x42, +0x5f, +0x50, +0x43, +0x49, +0x30, +0x49, +0x53, +0x41, +0x5f, +0x5b, +0x82, +0x2d, +0x52, +0x54, +0x43, +0x5f, +0x8, +0x5f, +0x48, +0x49, +0x44, +0xc, +0x41, +0xd0, +0xb, +0x0, +0x8, +0x5f, +0x43, +0x52, +0x53, +0x11, +0x18, +0xa, +0x15, +0x47, +0x1, +0x70, +0x0, +0x70, +0x0, +0x10, +0x2, +0x22, +0x0, +0x1, +0x47, +0x1, +0x72, +0x0, +0x72, +0x0, +0x2, +0x6, +0x79, +0x0, +0x5b, +0x82, +0x37, +0x4b, +0x42, +0x44, +0x5f, +0x8, +0x5f, +0x48, +0x49, +0x44, +0xc, +0x41, +0xd0, +0x3, +0x3, +0x14, +0x9, +0x5f, +0x53, +0x54, +0x41, +0x0, +0xa4, +0xa, +0xf, +0x8, +0x5f, +0x43, +0x52, +0x53, +0x11, +0x18, +0xa, +0x15, +0x47, +0x1, +0x60, +0x0, +0x60, +0x0, +0x1, +0x1, +0x47, +0x1, +0x64, +0x0, +0x64, +0x0, +0x1, +0x1, +0x22, +0x2, +0x0, +0x79, +0x0, +0x5b, +0x82, +0x27, +0x4d, +0x4f, +0x55, +0x5f, +0x8, +0x5f, +0x48, +0x49, +0x44, +0xc, +0x41, +0xd0, +0xf, +0x13, +0x14, +0x9, +0x5f, +0x53, +0x54, +0x41, +0x0, +0xa4, +0xa, +0xf, +0x8, +0x5f, +0x43, +0x52, +0x53, +0x11, +0x8, +0xa, +0x5, +0x22, +0x0, +0x10, +0x79, +0x0, +0x5b, +0x82, +0x4a, +0x4, +0x46, +0x44, +0x43, +0x30, +0x8, +0x5f, +0x48, +0x49, +0x44, +0xc, +0x41, +0xd0, +0x7, +0x0, +0x14, +0x18, +0x5f, +0x53, +0x54, +0x41, +0x0, +0x70, +0x46, +0x44, +0x45, +0x4e, +0x60, +0xa0, +0x6, +0x93, +0x60, +0x0, +0xa4, +0x0, +0xa1, +0x4, +0xa4, +0xa, +0xf, +0x8, +0x5f, +0x43, +0x52, +0x53, +0x11, +0x1b, +0xa, +0x18, +0x47, +0x1, +0xf2, +0x3, +0xf2, +0x3, +0x0, +0x4, +0x47, +0x1, +0xf7, +0x3, +0xf7, +0x3, +0x0, +0x1, +0x22, +0x40, +0x0, +0x2a, +0x4, +0x0, +0x79, +0x0, +0x5b, +0x82, +0x3e, +0x4c, +0x50, +0x54, +0x5f, +0x8, +0x5f, +0x48, +0x49, +0x44, +0xc, +0x41, +0xd0, +0x4, +0x0, +0x14, +0x18, +0x5f, +0x53, +0x54, +0x41, +0x0, +0x70, +0x4c, +0x50, +0x45, +0x4e, +0x60, +0xa0, +0x6, +0x93, +0x60, +0x0, +0xa4, +0x0, +0xa1, +0x4, +0xa4, +0xa, +0xf, +0x8, +0x5f, +0x43, +0x52, +0x53, +0x11, +0x10, +0xa, +0xd, +0x47, +0x1, +0x78, +0x3, +0x78, +0x3, +0x8, +0x8, +0x22, +0x80, +0x0, +0x79, +0x0, +0x5b, +0x82, +0x45, +0x4, +0x43, +0x4f, +0x4d, +0x31, +0x8, +0x5f, +0x48, +0x49, +0x44, +0xc, +0x41, +0xd0, +0x5, +0x1, +0x8, +0x5f, +0x55, +0x49, +0x44, +0x1, +0x14, +0x18, +0x5f, +0x53, +0x54, +0x41, +0x0, +0x70, +0x43, +0x41, +0x45, +0x4e, +0x60, +0xa0, +0x6, +0x93, +0x60, +0x0, +0xa4, +0x0, +0xa1, +0x4, +0xa4, +0xa, +0xf, +0x8, +0x5f, +0x43, +0x52, +0x53, +0x11, +0x10, +0xa, +0xd, +0x47, +0x1, +0xf8, +0x3, +0xf8, +0x3, +0x0, +0x8, +0x22, +0x10, +0x0, +0x79, +0x0, +0x5b, +0x82, +0x46, +0x4, +0x43, +0x4f, +0x4d, +0x32, +0x8, +0x5f, +0x48, +0x49, +0x44, +0xc, +0x41, +0xd0, +0x5, +0x1, +0x8, +0x5f, +0x55, +0x49, +0x44, +0xa, +0x2, +0x14, +0x18, +0x5f, +0x53, +0x54, +0x41, +0x0, +0x70, +0x43, +0x42, +0x45, +0x4e, +0x60, +0xa0, +0x6, +0x93, +0x60, +0x0, +0xa4, +0x0, +0xa1, +0x4, +0xa4, +0xa, +0xf, +0x8, +0x5f, +0x43, +0x52, +0x53, +0x11, +0x10, +0xa, +0xd, +0x47, +0x1, +0xf8, +0x2, +0xf8, +0x2, +0x0, +0x8, +0x22, +0x8, +0x0, +0x79, +0x0, +0x10, +0x4b, +0x8, +0x2e, +0x5f, +0x53, +0x42, +0x5f, +0x50, +0x43, +0x49, +0x30, +0x5b, +0x80, +0x50, +0x43, +0x53, +0x54, +0x1, +0xb, +0x0, +0xae, +0xa, +0x8, +0x5b, +0x81, +0x10, +0x50, +0x43, +0x53, +0x54, +0x43, +0x50, +0x43, +0x49, +0x55, +0x20, +0x50, +0x43, +0x49, +0x44, +0x20, +0x5b, +0x80, +0x53, +0x45, +0x4a, +0x5f, +0x1, +0xb, +0x8, +0xae, +0xa, +0x4, +0x5b, +0x81, +0xb, +0x53, +0x45, +0x4a, +0x5f, +0x43, +0x42, +0x30, +0x45, +0x4a, +0x20, +0x14, +0x11, +0x50, +0x43, +0x45, +0x4a, +0x1, +0x70, +0x79, +0x1, +0x68, +0x0, +0x42, +0x30, +0x45, +0x4a, +0xa4, +0x0, +0x14, +0x36, +0x50, +0x43, +0x4e, +0x46, +0x0, +0x70, +0x0, +0x60, +0xa2, +0x2c, +0x95, +0x60, +0xa, +0x1f, +0x75, +0x60, +0xa0, +0x11, +0x7b, +0x50, +0x43, +0x49, +0x55, +0x79, +0x1, +0x60, +0x0, +0x0, +0x50, +0x43, +0x4e, +0x54, +0x60, +0x1, +0xa0, +0x12, +0x7b, +0x50, +0x43, +0x49, +0x44, +0x79, +0x1, +0x60, +0x0, +0x0, +0x50, +0x43, +0x4e, +0x54, +0x60, +0xa, +0x3, +0x10, +0x4a, +0xa0, +0x5f, +0x53, +0x42, +0x5f, +0x10, +0x47, +0x74, +0x50, +0x43, +0x49, +0x30, +0x8, +0x5f, +0x50, +0x52, +0x54, +0x12, +0x4b, +0x73, +0x80, +0x12, +0xb, +0x4, +0xb, +0xff, +0xff, +0x0, +0x4c, +0x4e, +0x4b, +0x44, +0x0, +0x12, +0xb, +0x4, +0xb, +0xff, +0xff, +0x1, +0x4c, +0x4e, +0x4b, +0x41, +0x0, +0x12, +0xc, +0x4, +0xb, +0xff, +0xff, +0xa, +0x2, +0x4c, +0x4e, +0x4b, +0x42, +0x0, +0x12, +0xc, +0x4, +0xb, +0xff, +0xff, +0xa, +0x3, +0x4c, +0x4e, +0x4b, +0x43, +0x0, +0x12, +0xd, +0x4, +0xc, +0xff, +0xff, +0x1, +0x0, +0x0, +0x4c, +0x4e, +0x4b, +0x53, +0x0, +0x12, +0xd, +0x4, +0xc, +0xff, +0xff, +0x1, +0x0, +0x1, +0x4c, +0x4e, +0x4b, +0x42, +0x0, +0x12, +0xe, +0x4, +0xc, +0xff, +0xff, +0x1, +0x0, +0xa, +0x2, +0x4c, +0x4e, +0x4b, +0x43, +0x0, +0x12, +0xe, +0x4, +0xc, +0xff, +0xff, +0x1, +0x0, +0xa, +0x3, +0x4c, +0x4e, +0x4b, +0x44, +0x0, +0x12, +0xd, +0x4, +0xc, +0xff, +0xff, +0x2, +0x0, +0x0, +0x4c, +0x4e, +0x4b, +0x42, +0x0, +0x12, +0xd, +0x4, +0xc, +0xff, +0xff, +0x2, +0x0, +0x1, +0x4c, +0x4e, +0x4b, +0x43, +0x0, +0x12, +0xe, +0x4, +0xc, +0xff, +0xff, +0x2, +0x0, +0xa, +0x2, +0x4c, +0x4e, +0x4b, +0x44, +0x0, +0x12, +0xe, +0x4, +0xc, +0xff, +0xff, +0x2, +0x0, +0xa, +0x3, +0x4c, +0x4e, +0x4b, +0x41, +0x0, +0x12, +0xd, +0x4, +0xc, +0xff, +0xff, +0x3, +0x0, +0x0, +0x4c, +0x4e, +0x4b, +0x43, +0x0, +0x12, +0xd, +0x4, +0xc, +0xff, +0xff, +0x3, +0x0, +0x1, +0x4c, +0x4e, +0x4b, +0x44, +0x0, +0x12, +0xe, +0x4, +0xc, +0xff, +0xff, +0x3, +0x0, +0xa, +0x2, +0x4c, +0x4e, +0x4b, +0x41, +0x0, +0x12, +0xe, +0x4, +0xc, +0xff, +0xff, +0x3, +0x0, +0xa, +0x3, +0x4c, +0x4e, +0x4b, +0x42, +0x0, +0x12, +0xd, +0x4, +0xc, +0xff, +0xff, +0x4, +0x0, +0x0, +0x4c, +0x4e, +0x4b, +0x44, +0x0, +0x12, +0xd, +0x4, +0xc, +0xff, +0xff, +0x4, +0x0, +0x1, +0x4c, +0x4e, +0x4b, +0x41, +0x0, +0x12, +0xe, +0x4, +0xc, +0xff, +0xff, +0x4, +0x0, +0xa, +0x2, +0x4c, +0x4e, +0x4b, +0x42, +0x0, +0x12, +0xe, +0x4, +0xc, +0xff, +0xff, +0x4, +0x0, +0xa, +0x3, +0x4c, +0x4e, +0x4b, +0x43, +0x0, +0x12, +0xd, +0x4, +0xc, +0xff, +0xff, +0x5, +0x0, +0x0, +0x4c, +0x4e, +0x4b, +0x41, +0x0, +0x12, +0xd, +0x4, +0xc, +0xff, +0xff, +0x5, +0x0, +0x1, +0x4c, +0x4e, +0x4b, +0x42, +0x0, +0x12, +0xe, +0x4, +0xc, +0xff, +0xff, +0x5, +0x0, +0xa, +0x2, +0x4c, +0x4e, +0x4b, +0x43, +0x0, +0x12, +0xe, +0x4, +0xc, +0xff, +0xff, +0x5, +0x0, +0xa, +0x3, +0x4c, +0x4e, +0x4b, +0x44, +0x0, +0x12, +0xd, +0x4, +0xc, +0xff, +0xff, +0x6, +0x0, +0x0, +0x4c, +0x4e, +0x4b, +0x42, +0x0, +0x12, +0xd, +0x4, +0xc, +0xff, +0xff, +0x6, +0x0, +0x1, +0x4c, +0x4e, +0x4b, +0x43, +0x0, +0x12, +0xe, +0x4, +0xc, +0xff, +0xff, +0x6, +0x0, +0xa, +0x2, +0x4c, +0x4e, +0x4b, +0x44, +0x0, +0x12, +0xe, +0x4, +0xc, +0xff, +0xff, +0x6, +0x0, +0xa, +0x3, +0x4c, +0x4e, +0x4b, +0x41, +0x0, +0x12, +0xd, +0x4, +0xc, +0xff, +0xff, +0x7, +0x0, +0x0, +0x4c, +0x4e, +0x4b, +0x43, +0x0, +0x12, +0xd, +0x4, +0xc, +0xff, +0xff, +0x7, +0x0, +0x1, +0x4c, +0x4e, +0x4b, +0x44, +0x0, +0x12, +0xe, +0x4, +0xc, +0xff, +0xff, +0x7, +0x0, +0xa, +0x2, +0x4c, +0x4e, +0x4b, +0x41, +0x0, +0x12, +0xe, +0x4, +0xc, +0xff, +0xff, +0x7, +0x0, +0xa, +0x3, +0x4c, +0x4e, +0x4b, +0x42, +0x0, +0x12, +0xd, +0x4, +0xc, +0xff, +0xff, +0x8, +0x0, +0x0, +0x4c, +0x4e, +0x4b, +0x44, +0x0, +0x12, +0xd, +0x4, +0xc, +0xff, +0xff, +0x8, +0x0, +0x1, +0x4c, +0x4e, +0x4b, +0x41, +0x0, +0x12, +0xe, +0x4, +0xc, +0xff, +0xff, +0x8, +0x0, +0xa, +0x2, +0x4c, +0x4e, +0x4b, +0x42, +0x0, +0x12, +0xe, +0x4, +0xc, +0xff, +0xff, +0x8, +0x0, +0xa, +0x3, +0x4c, +0x4e, +0x4b, +0x43, +0x0, +0x12, +0xd, +0x4, +0xc, +0xff, +0xff, +0x9, +0x0, +0x0, +0x4c, +0x4e, +0x4b, +0x41, +0x0, +0x12, +0xd, +0x4, +0xc, +0xff, +0xff, +0x9, +0x0, +0x1, +0x4c, +0x4e, +0x4b, +0x42, +0x0, +0x12, +0xe, +0x4, +0xc, +0xff, +0xff, +0x9, +0x0, +0xa, +0x2, +0x4c, +0x4e, +0x4b, +0x43, +0x0, +0x12, +0xe, +0x4, +0xc, +0xff, +0xff, +0x9, +0x0, +0xa, +0x3, +0x4c, +0x4e, +0x4b, +0x44, +0x0, +0x12, +0xd, +0x4, +0xc, +0xff, +0xff, +0xa, +0x0, +0x0, +0x4c, +0x4e, +0x4b, +0x42, +0x0, +0x12, +0xd, +0x4, +0xc, +0xff, +0xff, +0xa, +0x0, +0x1, +0x4c, +0x4e, +0x4b, +0x43, +0x0, +0x12, +0xe, +0x4, +0xc, +0xff, +0xff, +0xa, +0x0, +0xa, +0x2, +0x4c, +0x4e, +0x4b, +0x44, +0x0, +0x12, +0xe, +0x4, +0xc, +0xff, +0xff, +0xa, +0x0, +0xa, +0x3, +0x4c, +0x4e, +0x4b, +0x41, +0x0, +0x12, +0xd, +0x4, +0xc, +0xff, +0xff, +0xb, +0x0, +0x0, +0x4c, +0x4e, +0x4b, +0x43, +0x0, +0x12, +0xd, +0x4, +0xc, +0xff, +0xff, +0xb, +0x0, +0x1, +0x4c, +0x4e, +0x4b, +0x44, +0x0, +0x12, +0xe, +0x4, +0xc, +0xff, +0xff, +0xb, +0x0, +0xa, +0x2, +0x4c, +0x4e, +0x4b, +0x41, +0x0, +0x12, +0xe, +0x4, +0xc, +0xff, +0xff, +0xb, +0x0, +0xa, +0x3, +0x4c, +0x4e, +0x4b, +0x42, +0x0, +0x12, +0xd, +0x4, +0xc, +0xff, +0xff, +0xc, +0x0, +0x0, +0x4c, +0x4e, +0x4b, +0x44, +0x0, +0x12, +0xd, +0x4, +0xc, +0xff, +0xff, +0xc, +0x0, +0x1, +0x4c, +0x4e, +0x4b, +0x41, +0x0, +0x12, +0xe, +0x4, +0xc, +0xff, +0xff, +0xc, +0x0, +0xa, +0x2, +0x4c, +0x4e, +0x4b, +0x42, +0x0, +0x12, +0xe, +0x4, +0xc, +0xff, +0xff, +0xc, +0x0, +0xa, +0x3, +0x4c, +0x4e, +0x4b, +0x43, +0x0, +0x12, +0xd, +0x4, +0xc, +0xff, +0xff, +0xd, +0x0, +0x0, +0x4c, +0x4e, +0x4b, +0x41, +0x0, +0x12, +0xd, +0x4, +0xc, +0xff, +0xff, +0xd, +0x0, +0x1, +0x4c, +0x4e, +0x4b, +0x42, +0x0, +0x12, +0xe, +0x4, +0xc, +0xff, +0xff, +0xd, +0x0, +0xa, +0x2, +0x4c, +0x4e, +0x4b, +0x43, +0x0, +0x12, +0xe, +0x4, +0xc, +0xff, +0xff, +0xd, +0x0, +0xa, +0x3, +0x4c, +0x4e, +0x4b, +0x44, +0x0, +0x12, +0xd, +0x4, +0xc, +0xff, +0xff, +0xe, +0x0, +0x0, +0x4c, +0x4e, +0x4b, +0x42, +0x0, +0x12, +0xd, +0x4, +0xc, +0xff, +0xff, +0xe, +0x0, +0x1, +0x4c, +0x4e, +0x4b, +0x43, +0x0, +0x12, +0xe, +0x4, +0xc, +0xff, +0xff, +0xe, +0x0, +0xa, +0x2, +0x4c, +0x4e, +0x4b, +0x44, +0x0, +0x12, +0xe, +0x4, +0xc, +0xff, +0xff, +0xe, +0x0, +0xa, +0x3, +0x4c, +0x4e, +0x4b, +0x41, +0x0, +0x12, +0xd, +0x4, +0xc, +0xff, +0xff, +0xf, +0x0, +0x0, +0x4c, +0x4e, +0x4b, +0x43, +0x0, +0x12, +0xd, +0x4, +0xc, +0xff, +0xff, +0xf, +0x0, +0x1, +0x4c, +0x4e, +0x4b, +0x44, +0x0, +0x12, +0xe, +0x4, +0xc, +0xff, +0xff, +0xf, +0x0, +0xa, +0x2, +0x4c, +0x4e, +0x4b, +0x41, +0x0, +0x12, +0xe, +0x4, +0xc, +0xff, +0xff, +0xf, +0x0, +0xa, +0x3, +0x4c, +0x4e, +0x4b, +0x42, +0x0, +0x12, +0xd, +0x4, +0xc, +0xff, +0xff, +0x10, +0x0, +0x0, +0x4c, +0x4e, +0x4b, +0x44, +0x0, +0x12, +0xd, +0x4, +0xc, +0xff, +0xff, +0x10, +0x0, +0x1, +0x4c, +0x4e, +0x4b, +0x41, +0x0, +0x12, +0xe, +0x4, +0xc, +0xff, +0xff, +0x10, +0x0, +0xa, +0x2, +0x4c, +0x4e, +0x4b, +0x42, +0x0, +0x12, +0xe, +0x4, +0xc, +0xff, +0xff, +0x10, +0x0, +0xa, +0x3, +0x4c, +0x4e, +0x4b, +0x43, +0x0, +0x12, +0xd, +0x4, +0xc, +0xff, +0xff, +0x11, +0x0, +0x0, +0x4c, +0x4e, +0x4b, +0x41, +0x0, +0x12, +0xd, +0x4, +0xc, +0xff, +0xff, +0x11, +0x0, +0x1, +0x4c, +0x4e, +0x4b, +0x42, +0x0, +0x12, +0xe, +0x4, +0xc, +0xff, +0xff, +0x11, +0x0, +0xa, +0x2, +0x4c, +0x4e, +0x4b, +0x43, +0x0, +0x12, +0xe, +0x4, +0xc, +0xff, +0xff, +0x11, +0x0, +0xa, +0x3, +0x4c, +0x4e, +0x4b, +0x44, +0x0, +0x12, +0xd, +0x4, +0xc, +0xff, +0xff, +0x12, +0x0, +0x0, +0x4c, +0x4e, +0x4b, +0x42, +0x0, +0x12, +0xd, +0x4, +0xc, +0xff, +0xff, +0x12, +0x0, +0x1, +0x4c, +0x4e, +0x4b, +0x43, +0x0, +0x12, +0xe, +0x4, +0xc, +0xff, +0xff, +0x12, +0x0, +0xa, +0x2, +0x4c, +0x4e, +0x4b, +0x44, +0x0, +0x12, +0xe, +0x4, +0xc, +0xff, +0xff, +0x12, +0x0, +0xa, +0x3, +0x4c, +0x4e, +0x4b, +0x41, +0x0, +0x12, +0xd, +0x4, +0xc, +0xff, +0xff, +0x13, +0x0, +0x0, +0x4c, +0x4e, +0x4b, +0x43, +0x0, +0x12, +0xd, +0x4, +0xc, +0xff, +0xff, +0x13, +0x0, +0x1, +0x4c, +0x4e, +0x4b, +0x44, +0x0, +0x12, +0xe, +0x4, +0xc, +0xff, +0xff, +0x13, +0x0, +0xa, +0x2, +0x4c, +0x4e, +0x4b, +0x41, +0x0, +0x12, +0xe, +0x4, +0xc, +0xff, +0xff, +0x13, +0x0, +0xa, +0x3, +0x4c, +0x4e, +0x4b, +0x42, +0x0, +0x12, +0xd, +0x4, +0xc, +0xff, +0xff, +0x14, +0x0, +0x0, +0x4c, +0x4e, +0x4b, +0x44, +0x0, +0x12, +0xd, +0x4, +0xc, +0xff, +0xff, +0x14, +0x0, +0x1, +0x4c, +0x4e, +0x4b, +0x41, +0x0, +0x12, +0xe, +0x4, +0xc, +0xff, +0xff, +0x14, +0x0, +0xa, +0x2, +0x4c, +0x4e, +0x4b, +0x42, +0x0, +0x12, +0xe, +0x4, +0xc, +0xff, +0xff, +0x14, +0x0, +0xa, +0x3, +0x4c, +0x4e, +0x4b, +0x43, +0x0, +0x12, +0xd, +0x4, +0xc, +0xff, +0xff, +0x15, +0x0, +0x0, +0x4c, +0x4e, +0x4b, +0x41, +0x0, +0x12, +0xd, +0x4, +0xc, +0xff, +0xff, +0x15, +0x0, +0x1, +0x4c, +0x4e, +0x4b, +0x42, +0x0, +0x12, +0xe, +0x4, +0xc, +0xff, +0xff, +0x15, +0x0, +0xa, +0x2, +0x4c, +0x4e, +0x4b, +0x43, +0x0, +0x12, +0xe, +0x4, +0xc, +0xff, +0xff, +0x15, +0x0, +0xa, +0x3, +0x4c, +0x4e, +0x4b, +0x44, +0x0, +0x12, +0xd, +0x4, +0xc, +0xff, +0xff, +0x16, +0x0, +0x0, +0x4c, +0x4e, +0x4b, +0x42, +0x0, +0x12, +0xd, +0x4, +0xc, +0xff, +0xff, +0x16, +0x0, +0x1, +0x4c, +0x4e, +0x4b, +0x43, +0x0, +0x12, +0xe, +0x4, +0xc, +0xff, +0xff, +0x16, +0x0, +0xa, +0x2, +0x4c, +0x4e, +0x4b, +0x44, +0x0, +0x12, +0xe, +0x4, +0xc, +0xff, +0xff, +0x16, +0x0, +0xa, +0x3, +0x4c, +0x4e, +0x4b, +0x41, +0x0, +0x12, +0xd, +0x4, +0xc, +0xff, +0xff, +0x17, +0x0, +0x0, +0x4c, +0x4e, +0x4b, +0x43, +0x0, +0x12, +0xd, +0x4, +0xc, +0xff, +0xff, +0x17, +0x0, +0x1, +0x4c, +0x4e, +0x4b, +0x44, +0x0, +0x12, +0xe, +0x4, +0xc, +0xff, +0xff, +0x17, +0x0, +0xa, +0x2, +0x4c, +0x4e, +0x4b, +0x41, +0x0, +0x12, +0xe, +0x4, +0xc, +0xff, +0xff, +0x17, +0x0, +0xa, +0x3, +0x4c, +0x4e, +0x4b, +0x42, +0x0, +0x12, +0xd, +0x4, +0xc, +0xff, +0xff, +0x18, +0x0, +0x0, +0x4c, +0x4e, +0x4b, +0x44, +0x0, +0x12, +0xd, +0x4, +0xc, +0xff, +0xff, +0x18, +0x0, +0x1, +0x4c, +0x4e, +0x4b, +0x41, +0x0, +0x12, +0xe, +0x4, +0xc, +0xff, +0xff, +0x18, +0x0, +0xa, +0x2, +0x4c, +0x4e, +0x4b, +0x42, +0x0, +0x12, +0xe, +0x4, +0xc, +0xff, +0xff, +0x18, +0x0, +0xa, +0x3, +0x4c, +0x4e, +0x4b, +0x43, +0x0, +0x12, +0xd, +0x4, +0xc, +0xff, +0xff, +0x19, +0x0, +0x0, +0x4c, +0x4e, +0x4b, +0x41, +0x0, +0x12, +0xd, +0x4, +0xc, +0xff, +0xff, +0x19, +0x0, +0x1, +0x4c, +0x4e, +0x4b, +0x42, +0x0, +0x12, +0xe, +0x4, +0xc, +0xff, +0xff, +0x19, +0x0, +0xa, +0x2, +0x4c, +0x4e, +0x4b, +0x43, +0x0, +0x12, +0xe, +0x4, +0xc, +0xff, +0xff, +0x19, +0x0, +0xa, +0x3, +0x4c, +0x4e, +0x4b, +0x44, +0x0, +0x12, +0xd, +0x4, +0xc, +0xff, +0xff, +0x1a, +0x0, +0x0, +0x4c, +0x4e, +0x4b, +0x42, +0x0, +0x12, +0xd, +0x4, +0xc, +0xff, +0xff, +0x1a, +0x0, +0x1, +0x4c, +0x4e, +0x4b, +0x43, +0x0, +0x12, +0xe, +0x4,
Lines of this file are not shown. View the raw message.
hw/i386/q35-acpi-dsdt.hex.generated new file +7346 -0
7,346 lines not on this page · raw message
hw/i386/ssdt-misc.hex.generated new file +190 -0
190 lines not on this page · raw message
hw/i386/ssdt-pcihp.hex.generated new file +108 -0
108 lines not on this page · raw message
hw/i386/ssdt-proc.hex.generated new file +134 -0
134 lines not on this page · raw message
The rest of this diff is not shown. View the raw message.
Signature · 1 line
MST
Part of the diff is not shown here. View the raw message.
Re: [Qemu-devel] [PATCH v2 repost 4/9] acpi: pre-compiled ASL files
Quoted 4 lines · Michael S. Tsirkin
Add pre-compiled ASL files. Useful for systems that do not have IASL.
Signed-off-by Michael S. Tsirkin <[email protected]>
Quoted 12 lines
--- hw/i386/acpi-dsdt.hex.generated | 4409 +++++++++++++++++++++ hw/i386/q35-acpi-dsdt.hex.generated | 7346 +++++++++++++++++++++++++++++++++++ hw/i386/ssdt-misc.hex.generated | 190 + hw/i386/ssdt-pcihp.hex.generated | 108 + hw/i386/ssdt-proc.hex.generated | 134 + 5 files changed, 12187 insertions(+) create mode 100644 hw/i386/acpi-dsdt.hex.generated create mode 100644 hw/i386/q35-acpi-dsdt.hex.generated create mode 100644 hw/i386/ssdt-misc.hex.generated create mode 100644 hw/i386/ssdt-pcihp.hex.generated create mode 100644 hw/i386/ssdt-proc.hex.generated
PATCH v2 5/9 i386: add bios linker/loader
In reply to Michael S. TsirkinThis add a dynamic bios linker/loader.
This will be used by acpi table generation code to:
- load each table in the appropriate memory egment
- link tables to each other
- fix up checksums after said linking
--- hw/i386/Makefile.objs | 1 + hw/i386/bios-linker-loader.c | 155 +++++++++++++++++++++++++++++++++++ include/hw/i386/bios-linker-loader.h | 26 ++++++ 3 files changed, 182 insertions(+) create mode 100644 hw/i386/bios-linker-loader.c create mode 100644 include/hw/i386/bios-linker-loader.h
hw/i386/Makefile.objs +1 -0
@@ -4,6 +4,7 @@ obj-y += pc.o pc_piix.o pc_q35.o obj-$(CONFIG_XEN) += xen_domainbuild.o xen_machine_pv.o obj-y += kvmvapic.o +obj-y += bios-linker-loader.o iasl-option=$(shell if test -z "`$(1) $(2) 2>&1 > /dev/null`" \ ; then echo "$(2)"; else echo "$(3)"; fi ;)
hw/i386/bios-linker-loader.c new file +155 -0
155 lines not on this page · raw message
include/hw/i386/bios-linker-loader.h new file +26 -0
@@ -0,0 +1,26 @@ +#ifndef BIOS_LINKER_LOADER_H +#define BIOS_LINKER_LOADER_H + +#include <glib.h> +#include <stdbool.h> +#include <inttypes.h> + +GArray *bios_linker_init (void ); + +void bios_linker_alloc (GArray *linker, +const char *file, +uint32_t alloc_align, +bool alloc_fseg); + +void bios_linker_add_checksum (GArray *linker,const char *file,void *table, +void *start,unsigned size,uint8_t *checksum); + + +void bios_linker_add_pointer (GArray *linker, +const char *dest_file, +const char *src_file, +GArray *table,void *pointer, +uint8_t pointer_size); + +void *bios_linker_cleanup (GArray *linker); +#endif
Signature · 1 line
MST
Re: [Qemu-devel] [PATCH v2 repost 5/9] i386: add bios linker/loader
Quoted 1 line · Michael S. Tsirkin
This add a dynamic bios linker/loader.
s/add/adds/
Quoted 3 lines
This will be used by acpi table generation code to:
- load each table in the appropriate memory egment
s/egment/segment/
Quoted 23 lines
hw/i386/bios-linker-loader.c new file +17
-0@@ -0,0 +1,155 @@ +/* Dynamic linker/loader of ACPI tables +* +* Copyright (C) 2013 Red Hat Inc +* +* Author: Michael S. Tsirkin <[email protected]> +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License as published by +* the Free Software Foundation; either version 2 of the License, or +* (at your option) any later version. + +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. + +* You should have received a copy of the GNU General Public License along
hw/i386/bios-linker-loader.c line 27
Quoted 10 lines
hw/i386/bios-linker-loader.c new file +10
-0+* with this program; if not, see <http://www.gnu.org/licenses/>. +*/ + +#include "hw/i386/bios-linker-loader.h" + +#include <string.h> +#include <assert.h> +#include "qemu/bswap.h" + +#define BIOS_LINKER_LOADER_FILESZ 56
Perhaps share a macro between this file, "hw/core/loader.c", and "include/hw/nvram/fw_cfg.h"?
Quoted 7 lines
hw/i386/bios-linker-loader.c new file +7
-0+ +struct BiosLinkerLoaderEntry { +uint32_t command; +union { +/* +* COMMAND_ALLOCATE - allocate a table from @alloc_file +* subject to @alloc_align alignment (must be power of 2)
hw/i386/bios-linker-loader.c line 44
Quoted 10 lines
hw/i386/bios-linker-loader.c new file +10
-0+* and @alloc_zone (can be HIGH or FSEG) requirements. +* +* Must appear exactly once for each file, and before +* this file is referenced by any other command. +*/ +struct { +char alloc_file[BIOS_LINKER_LOADER_FILESZ ]; +uint32_t alloc_align; +uint8_t alloc_zone; + };
I think in OVMF we won't rely on the alloc_zone / alloc_align members, but that's OVMF's private business.
hw/i386/bios-linker-loader.c line 50
Quoted 6 lines
hw/i386/bios-linker-loader.c new file +6
-0+ +/* +* COMMAND_ADD_POINTER - patch the table (originating from +* @dest_file) at @pointer_offset, by adding a pointer to the table +* originating from @src_file. 1,2,4 or 8 byte unsigned +* addition is used depending on @pointer_size.
What do you mean by addition? Hm... I vaguely remember something from our earlier discussion. I'll probably understand again when looking at the next patches.
hw/i386/bios-linker-loader.c line 57
Quoted 7 lines
hw/i386/bios-linker-loader.c new file +7
-0+*/ +struct { +char pointer_dest_file[BIOS_LINKER_LOADER_FILESZ ]; +char pointer_src_file[BIOS_LINKER_LOADER_FILESZ ]; +uint32_t pointer_offset; +uint8_t pointer_size; + };
I wonder if we can implement this full flexibility in OVMF. The default edk2 ACPI table installation protocol special-cases the tables that commonly need pointers, and automatically links them together (and re-checksums them) during table-wise installation. So for those cases this linker command is a no-op, which is good. Arbitrary cross-linking may not be possible in OVMF though.
Quoted 4 lines
hw/i386/bios-linker-loader.c new file +4
-0+ +/* +* COMMAND_ADD_CHECKSUM - calculate checksum of the range specified by +* @cksum_start and @cksum_length fields,
hw/i386/bios-linker-loader.c line 71
Quoted 10 lines
hw/i386/bios-linker-loader.c new file +10
-0+* and then add the value at @cksum_offset. +* Checksum simply sums -X for each byte X in the range +* using 8-bit math. +*/ +struct { +char cksum_file[BIOS_LINKER_LOADER_FILESZ ]; +uint32_t cksum_offset; +uint32_t cksum_start; +uint32_t cksum_length; + };
IIRC in OVMF part of this is automatic again, but in any case this command doesn't seem impossible to implement.
hw/i386/bios-linker-loader.c line 75
Quoted 4 lines
hw/i386/bios-linker-loader.c new file +4
-0+ +/* padding */ +char pad[124 ]; + };
The unnamed union member is a gcc-ism. I'd give it a short name (like "u"), but feel free to ignore this.
hw/i386/bios-linker-loader.c line 77
Quoted 2 lines
hw/i386/bios-linker-loader.c new file +2
-0+}; +typedef struct BiosLinkerLoaderEntry BiosLinkerLoaderEntry ;
Probably not needed in practice, but for documentation purposes I suggest QEMU_PACKED from "include/qemu/compiler.h".
Quoted 22 lines
hw/i386/bios-linker-loader.c new file +22
-0+ +enum { +BIOS_LINKER_LOADER_COMMAND_ALLOCATE =0x1 , +BIOS_LINKER_LOADER_COMMAND_ADD_POINTER =0x2 , +BIOS_LINKER_LOADER_COMMAND_ADD_CHECKSUM =0x3 , +}; + +enum { +BIOS_LINKER_LOADER_ALLOC_ZONE_HIGH =0x1 , +BIOS_LINKER_LOADER_ALLOC_ZONE_FSEG =0x2 , +}; + +GArray *bios_linker_init (void ) +{ +return g_array_new (false, true/* clear */ ,sizeof (BiosLinkerLoaderEntry)); +} + +/* Free linker wrapper and return the linker array. */ +void *bios_linker_cleanup (GArray *linker) +{ +return g_array_free (linker, false); +}
hw/i386/bios-linker-loader.c line 109
Quoted 10 lines
hw/i386/bios-linker-loader.c new file +10
-0+ +void bios_linker_alloc (GArray *linker, +const char *file, +uint32_t alloc_align, +bool alloc_fseg) +{ +BiosLinkerLoaderEntry entry; + +memset (&entry,0 ,sizeof entry); +strncpy (entry.alloc_file, file,sizeof entry.alloc_file -1 );
Yes, the fw_cfg filenames appear NUL-terminated.
Quoted 36 lines
hw/i386/bios-linker-loader.c new file +36
-0+ entry.command =cpu_to_le32 (BIOS_LINKER_LOADER_COMMAND_ALLOCATE ); + entry.alloc_align =cpu_to_le32 (alloc_align); + entry.alloc_zone =cpu_to_le32 (alloc_fseg ? +BIOS_LINKER_LOADER_ALLOC_ZONE_FSEG : +BIOS_LINKER_LOADER_ALLOC_ZONE_HIGH ); + +/* Alloc entries must come first, so prepend them */ +g_array_prepend_val (linker, entry); +} + +void bios_linker_add_checksum (GArray *linker,const char *file,void *table, +void *start,unsigned size,uint8_t *checksum) +{ +BiosLinkerLoaderEntry entry; + +memset (&entry,0 ,sizeof entry); +strncpy (entry.cksum_file, file,sizeof entry.cksum_file -1 ); + entry.command =cpu_to_le32 (BIOS_LINKER_LOADER_COMMAND_ADD_CHECKSUM ); + entry.cksum_offset =cpu_to_le32 (checksum - (uint8_t *)table); + entry.cksum_start =cpu_to_le32 ((uint8_t *)start - (uint8_t *)table); + entry.cksum_length =cpu_to_le32 (size); + +g_array_append_val (linker, entry); +} + +void bios_linker_add_pointer (GArray *linker, +const char *dest_file, +const char *src_file, +GArray *table,void *pointer, +uint8_t pointer_size) +{ +BiosLinkerLoaderEntry entry; + +memset (&entry,0 ,sizeof entry); +strncpy (entry.pointer_dest_file, dest_file, +sizeof entry.pointer_dest_file -1 );
hw/i386/bios-linker-loader.c line 155
Quoted 10 lines
hw/i386/bios-linker-loader.c new file +10
-0+strncpy (entry.pointer_src_file, src_file, +sizeof entry.pointer_src_file -1 ); + entry.command =cpu_to_le32 (BIOS_LINKER_LOADER_COMMAND_ADD_POINTER ); + entry.pointer_offset =cpu_to_le32 ((gchar *)pointer - table->data); + entry.pointer_size = pointer_size; +assert (pointer_size ==1 || pointer_size ==2 || + pointer_size ==4 || pointer_size ==8 ); + +g_array_append_val (linker, entry); +}
So "table" is actually "dest_table" (the table to patch), and "pointer" points to the pointer in it to patch.
Qemu, seabios and OVMF must all agree upon this interface. Since you're moving tables from seabios to qemu, that part of the agreement is a given. Without actually trying to consume these tables in OVMF I don't know now if I'll run into any problems, but it doesn't immediately look threatening.
I think you might want to fix the commit message typos and add the QEMU_PACKED macro, so postponing my R-b until your answer.
Thanks
Laszlo
Re: [Qemu-devel] [PATCH v2 repost 5/9] i386: add bios linker/loader
Quoted 40 lines · Laszlo Ersek
Quoted 1 line · Michael S. Tsirkin
This add a dynamic bios linker/loader.
s/add/adds/
Quoted 3 lines
This will be used by acpi table generation code to:
- load each table in the appropriate memory egments/egment/segment/
Quoted 28 lines
hw/i386/bios-linker-loader.c new file +22
-0@@ -0,0 +1,155 @@ +/* Dynamic linker/loader of ACPI tables +* +* Copyright (C) 2013 Red Hat Inc +* +* Author: Michael S. Tsirkin <[email protected]> +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License as published by +* the Free Software Foundation; either version 2 of the License, or +* (at your option) any later version. + +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. + +* You should have received a copy of the GNU General Public License along +* with this program; if not, see <http://www.gnu.org/licenses/>. +*/ + +#include "hw/i386/bios-linker-loader.h" +
Quoted 8 lines
hw/i386/bios-linker-loader.c line 27
Quoted 5 lines
hw/i386/bios-linker-loader.c new file +5
-0+#include <string.h> +#include <assert.h> +#include "qemu/bswap.h" + +#define BIOS_LINKER_LOADER_FILESZ 56Perhaps share a macro between this file, "
hw/core/loader.c", and "include/hw/nvram/fw_cfg.h"?
I'm not sure - it doesn't have to match exactly and I also want to avoid dependency between loader and fw_cfg.h. If yes we'll need a new header for this macro.
Quoted 12 lines
Quoted 12 lines
hw/i386/bios-linker-loader.c new file +12
-0+ +struct BiosLinkerLoaderEntry { +uint32_t command; +union { +/* +* COMMAND_ALLOCATE - allocate a table from @alloc_file +* subject to @alloc_align alignment (must be power of 2) +* and @alloc_zone (can be HIGH or FSEG) requirements. +* +* Must appear exactly once for each file, and before +* this file is referenced by any other command. +*/
Quoted 8 lines
hw/i386/bios-linker-loader.c line 44
Quoted 5 lines
hw/i386/bios-linker-loader.c new file +5
-0+struct { +char alloc_file[BIOS_LINKER_LOADER_FILESZ ]; +uint32_t alloc_align; +uint8_t alloc_zone; + };I think in OVMF we won't rely on the
alloc_zone/alloc_alignmembers, but that's OVMF's private business.
RSDP must be in FSEG though
Quoted 44 lines
hw/i386/bios-linker-loader.c line 50
Quoted 6 lines
hw/i386/bios-linker-loader.c new file +6
-0+ +/* +* COMMAND_ADD_POINTER - patch the table (originating from +* @dest_file) at @pointer_offset, by adding a pointer to the table +* originating from @src_file. 1,2,4 or 8 byte unsigned +* addition is used depending on @pointer_size. What do you mean by addition? Hm... I vaguely remember something from our earlier discussion. I'll probably understand again when looking at the next patches.
hw/i386/bios-linker-loader.c line 57
Quoted 7 lines
hw/i386/bios-linker-loader.c new file +7
-0+*/ +struct { +char pointer_dest_file[BIOS_LINKER_LOADER_FILESZ ]; +char pointer_src_file[BIOS_LINKER_LOADER_FILESZ ]; +uint32_t pointer_offset; +uint8_t pointer_size; + };I wonder if we can implement this full flexibility in OVMF. The default edk2 ACPI table installation protocol special-cases the tables that commonly need pointers, and automatically links them together (and re-checksums them) during table-wise installation. So for those cases this linker command is a no-op, which is good. Arbitrary cross-linking may not be possible in OVMF though.
Quoted 4 lines
hw/i386/bios-linker-loader.c new file +4
-0+ +/* +* COMMAND_ADD_CHECKSUM - calculate checksum of the range specified by +* @cksum_start and @cksum_length fields, hw/i386/bios-linker-loader.c line 71
Quoted 10 lines
hw/i386/bios-linker-loader.c new file +10
-0+* and then add the value at @cksum_offset. +* Checksum simply sums -X for each byte X in the range +* using 8-bit math. +*/ +struct { +char cksum_file[BIOS_LINKER_LOADER_FILESZ ]; +uint32_t cksum_offset; +uint32_t cksum_start; +uint32_t cksum_length; + };IIRC in OVMF part of this is automatic again, but in any case this command doesn't seem impossible to implement.
Quoted 8 lines
hw/i386/bios-linker-loader.c line 75
Quoted 4 lines
hw/i386/bios-linker-loader.c new file +4
-0+ +/* padding */ +char pad[124 ]; + };The unnamed union member is a gcc-ism. I'd give it a short name (like "u"), but feel free to ignore this.
This isn't a gcc-ism. It's in C1x:
An unnamed member whose type specifier is a structure specifier with no tag is called an anonymous structure; an unnamed member whose type specifier is a union specifier with no tag is called an anonymous union. The members of an anonymous structure or union are considered to be members of the containing structure or union. This applies recursively if the containing structure or union is also anonymous.
Quoted 6 lines
hw/i386/bios-linker-loader.c line 77
Quoted 3 lines
hw/i386/bios-linker-loader.c new file +2
-0+}; +typedef struct BiosLinkerLoaderEntry BiosLinkerLoaderEntry ;Probably not needed in practice, but for documentation purposes I suggest
QEMU_PACKEDfrom "include/qemu/compiler.h".
It's not required in practice but I can add this though I'm not sure - what does this document?
Quoted 76 lines
Quoted 22 lines
hw/i386/bios-linker-loader.c new file +22
-0+ +enum { +BIOS_LINKER_LOADER_COMMAND_ALLOCATE =0x1 , +BIOS_LINKER_LOADER_COMMAND_ADD_POINTER =0x2 , +BIOS_LINKER_LOADER_COMMAND_ADD_CHECKSUM =0x3 , +}; + +enum { +BIOS_LINKER_LOADER_ALLOC_ZONE_HIGH =0x1 , +BIOS_LINKER_LOADER_ALLOC_ZONE_FSEG =0x2 , +}; + +GArray *bios_linker_init (void ) +{ +return g_array_new (false, true/* clear */ ,sizeof (BiosLinkerLoaderEntry)); +} + +/* Free linker wrapper and return the linker array. */ +void *bios_linker_cleanup (GArray *linker) +{ +return g_array_free (linker, false); +}hw/i386/bios-linker-loader.c line 109
Quoted 10 lines
hw/i386/bios-linker-loader.c new file +10
-0+ +void bios_linker_alloc (GArray *linker, +const char *file, +uint32_t alloc_align, +bool alloc_fseg) +{ +BiosLinkerLoaderEntry entry; + +memset (&entry,0 ,sizeof entry); +strncpy (entry.alloc_file, file,sizeof entry.alloc_file -1 );Yes, the
fw_cfgfilenames appear NUL-terminated.Quoted 41 lines
hw/i386/bios-linker-loader.c new file +41
-0+ entry.command =cpu_to_le32 (BIOS_LINKER_LOADER_COMMAND_ALLOCATE ); + entry.alloc_align =cpu_to_le32 (alloc_align); + entry.alloc_zone =cpu_to_le32 (alloc_fseg ? +BIOS_LINKER_LOADER_ALLOC_ZONE_FSEG : +BIOS_LINKER_LOADER_ALLOC_ZONE_HIGH ); + +/* Alloc entries must come first, so prepend them */ +g_array_prepend_val (linker, entry); +} + +void bios_linker_add_checksum (GArray *linker,const char *file,void *table, +void *start,unsigned size,uint8_t *checksum) +{ +BiosLinkerLoaderEntry entry; + +memset (&entry,0 ,sizeof entry); +strncpy (entry.cksum_file, file,sizeof entry.cksum_file -1 ); + entry.command =cpu_to_le32 (BIOS_LINKER_LOADER_COMMAND_ADD_CHECKSUM ); + entry.cksum_offset =cpu_to_le32 (checksum - (uint8_t *)table); + entry.cksum_start =cpu_to_le32 ((uint8_t *)start - (uint8_t *)table); + entry.cksum_length =cpu_to_le32 (size); + +g_array_append_val (linker, entry); +} + +void bios_linker_add_pointer (GArray *linker, +const char *dest_file, +const char *src_file, +GArray *table,void *pointer, +uint8_t pointer_size) +{ +BiosLinkerLoaderEntry entry; + +memset (&entry,0 ,sizeof entry); +strncpy (entry.pointer_dest_file, dest_file, +sizeof entry.pointer_dest_file -1 ); +strncpy (entry.pointer_src_file, src_file, +sizeof entry.pointer_src_file -1 ); + entry.command =cpu_to_le32 (BIOS_LINKER_LOADER_COMMAND_ADD_POINTER ); + entry.pointer_offset =cpu_to_le32 ((gchar *)pointer - table->data); + entry.pointer_size = pointer_size;
Quoted 8 lines
hw/i386/bios-linker-loader.c line 155
Quoted 5 lines
hw/i386/bios-linker-loader.c new file +5
-0+assert (pointer_size ==1 || pointer_size ==2 || + pointer_size ==4 || pointer_size ==8 ); + +g_array_append_val (linker, entry); +}So "table" is actually "
dest_table" (the table to patch), and "pointer" points to the pointer in it to patch.
Yes.
Quoted 12 lines
Qemu, seabios and OVMF must all agree upon this interface. Since you're moving tables from seabios to qemu, that part of the agreement is a given. Without actually trying to consume these tables in OVMF I don't know now if I'll run into any problems, but it doesn't immediately look threatening.
I think you might want to fix the commit message typos and add the
QEMU_PACKEDmacro, so postponing my R-b until your answer.Thanks
Laszlo
Re: [Qemu-devel] [PATCH v2 repost 5/9] i386: add bios linker/loader
Quoted 20 lines · Michael S. Tsirkin
Quoted 19 lines · Laszlo Ersek
Quoted 16 lines · Michael S. Tsirkin
hw/i386/bios-linker-loader.c new file +16
-0+struct BiosLinkerLoaderEntry { +uint32_t command; +union { +/* +* COMMAND_ALLOCATE - allocate a table from @alloc_file +* subject to @alloc_align alignment (must be power of 2) +* and @alloc_zone (can be HIGH or FSEG) requirements. +* +* Must appear exactly once for each file, and before +* this file is referenced by any other command. +*/ +struct { +char alloc_file[BIOS_LINKER_LOADER_FILESZ ]; +uint32_t alloc_align; +uint8_t alloc_zone; + };
Quoted 4 lines
Quoted 2 lines
I think in OVMF we won't rely on the
alloc_zone/alloc_alignmembers, but that's OVMF's private business.RSDP must be in FSEG though
I didn't express myself clearly, sorry. The default edk2 ACPI table protocol that OVMF uses should allocate RSDP and the like automatically in correct regions. (Allocating reserved memory for External(XXXX,OpRegionObj) needs a different call though.)
Quoted 9 lines
Quoted 8 lines
hw/i386/bios-linker-loader.c line 75
Quoted 4 lines
hw/i386/bios-linker-loader.c new file +4
-0+ +/* padding */ +char pad[124 ]; + };The unnamed union member is a gcc-ism. I'd give it a short name (like "u"), but feel free to ignore this.
Quoted 8 lines
This isn't a gcc-ism. It's in C1x:
An unnamed member whose type specifier is a structure specifier with no tag is called an anonymous structure; an unnamed member whose type specifier is a union specifier with no tag is called an anonymous union. The members of an anonymous structure or union are considered to be members of the containing structure or union. This applies recursively if the containing structure or union is also anonymous.
This part of the discussion is academic, but the unnamed union member is a gcc-ism in the qemu source, because AFAIK qemu uses the gnu89 dialect by default, and gnu99 on Solaris.
Quoted 8 lines
Quoted 5 lines
Review
Quoted 2 lines
(quoted diff) +2
-0+}; +typedef struct BiosLinkerLoaderEntry BiosLinkerLoaderEntry;Probably not needed in practice, but for documentation purposes I suggest
QEMU_PACKEDfrom "include/qemu/compiler.h".It's not required in practice but I can add this though I'm not sure - what does this document?
To me it documents that we rely on the absence of inter-member padding.
Thanks
Laszlo
Re: [Qemu-devel] [PATCH v2 repost 5/9] i386: add bios linker/loader
Quoted 49 lines · Laszlo Ersek
Quoted 20 lines · Michael S. Tsirkin
Quoted 19 lines · Laszlo Ersek
Quoted 16 lines · Michael S. Tsirkin
hw/i386/bios-linker-loader.c new file +16
-0+struct BiosLinkerLoaderEntry { +uint32_t command; +union { +/* +* COMMAND_ALLOCATE - allocate a table from @alloc_file +* subject to @alloc_align alignment (must be power of 2) +* and @alloc_zone (can be HIGH or FSEG) requirements. +* +* Must appear exactly once for each file, and before +* this file is referenced by any other command. +*/ +struct { +char alloc_file[BIOS_LINKER_LOADER_FILESZ ]; +uint32_t alloc_align; +uint8_t alloc_zone; + };Quoted 4 lines
Quoted 2 lines
I think in OVMF we won't rely on the
alloc_zone/alloc_alignmembers, but that's OVMF's private business.RSDP must be in FSEG though
I didn't express myself clearly, sorry. The default edk2 ACPI table protocol that OVMF uses should allocate RSDP and the like automatically in correct regions. (Allocating reserved memory for
External(XXXX,OpRegionObj)needs a different call though.)Quoted 9 lines
Quoted 8 lines
hw/i386/bios-linker-loader.c line 75
Quoted 4 lines
hw/i386/bios-linker-loader.c new file +4
-0+ +/* padding */ +char pad[124 ]; + };The unnamed union member is a gcc-ism. I'd give it a short name (like "u"), but feel free to ignore this.
Quoted 8 lines
This isn't a gcc-ism. It's in C1x:
An unnamed member whose type specifier is a structure specifier with no tag is called an anonymous structure; an unnamed member whose type specifier is a union specifier with no tag is called an anonymous union. The members of an anonymous structure or union are considered to be members of the containing structure or union. This applies recursively if the containing structure or union is also anonymous.
Quoted 4 lines
This part of the discussion is academic, but the unnamed union member is a gcc-ism in the qemu source, because AFAIK qemu uses the gnu89 dialect by default, and gnu99 on Solaris.
The important thing is that it's part of the standard now, so won't go away or interfere with porting to a new compiler if we ever try to do it.
Quoted 13 lines
Quoted 8 lines
Quoted 5 lines
Review
Quoted 2 lines
(quoted diff) +2
-0+}; +typedef struct BiosLinkerLoaderEntry BiosLinkerLoaderEntry;Probably not needed in practice, but for documentation purposes I suggest
QEMU_PACKEDfrom "include/qemu/compiler.h".It's not required in practice but I can add this though I'm not sure - what does this document?
To me it documents that we rely on the absence of inter-member padding.
Thanks
Laszlo
PATCH v2 6/9 loader: support for unmapped ROM blobs
In reply to Michael S. TsirkinSupport ROM blobs not mapped into guest memory:
let user pass in MR for memory serving as the backing store.
--- hw/core/loader.c | 32 +++++++++++++++++++++++++++++--- hw/lm32/lm32_hwsetup.h | 2 +- include/hw/loader.h | 4 ++-- 3 files changed, 32 insertions(+), 6 deletions(-)
hw/core/loader.c +29 -3
@@ -542,6 +542,7 @@ struct Rom {size_t datasize;uint8_t *data; +MemoryRegion *mr;int isrom;char *fw_dir;char *fw_file;
@@ -641,7 +642,7 @@ err: }int rom_add_blob (const char *name,const void *blob,size_t len, -hwaddr addr) +hwaddr addr,MemoryRegion *mr) {Rom *rom;
@@ -651,6 +652,11 @@ int rom_add_blob(const char *name, const void *blob, size_t len, rom->romsize = len; rom->datasize = len; rom->data =g_malloc0 (rom->datasize); + rom->mr = mr; +if (mr) { +assert (memory_region_is_ram (mr)); + rom->isrom =memory_region_is_rom (mr); + }memcpy (rom->data, blob, len);rom_insert (rom);return 0 ;
@@ -697,7 +703,12 @@ static void rom_reset(void *unused)if (rom->data ==NULL ) {continue ; } -cpu_physical_memory_write_rom (rom->addr, rom->data, rom->datasize); +if (rom->mr) { +void *host =memory_region_get_ram_ptr (rom->mr); +memcpy (host, rom->data, rom->datasize); + }else { +cpu_physical_memory_write_rom (rom->addr, rom->data, rom->datasize); + }if (rom->isrom) {/* rom needs to be written only once */ g_free (rom->data);
@@ -713,6 +724,9 @@ int rom_load_all(void)Rom *rom; QTAILQ_FOREACH(rom, &roms, next) { +if (rom->mr) { +continue ; + }if (rom->fw_file) {continue ; }
@@ -746,6 +760,9 @@ static Rom *find_rom(hwaddr addr)if (rom->fw_file) {continue ; } +if (rom->mr) { +continue ; + }if (rom->addr > addr) {continue ; }
@@ -773,6 +790,9 @@ int rom_copy(uint8_t *dest, hwaddr addr, size_t size)if (rom->fw_file) {continue ; } +if (rom->mr) { +continue ; + }if (rom->addr + rom->romsize < addr) {continue ; }
@@ -832,7 +852,13 @@ void do_info_roms(Monitor *mon, const QDict *qdict)Rom *rom; QTAILQ_FOREACH(rom, &roms, next) { -if (!rom->fw_file) { +if (rom->mr) { +monitor_printf (mon,"%s" +" size=0x%06zx name=\"%s\"\n" , + rom->mr->name, + rom->romsize, + rom->name); + }else if (!rom->fw_file) { monitor_printf(mon, "addr=" TARGET_FMT_plx " size=0x%06zx mem=%s name=\"%s\"\n", rom->addr, rom->romsize,
hw/lm32/lm32_hwsetup.h +1 -1
@@ -73,7 +73,7 @@ static inline void hwsetup_free(HWSetup *hw)static inline void hwsetup_create_rom (HWSetup *hw,hwaddr base) { -rom_add_blob ("hwsetup" , hw->data,TARGET_PAGE_SIZE , base); +rom_add_blob ("hwsetup" , hw->data,TARGET_PAGE_SIZE , base,NULL ); }static inline void hwsetup_add_u8 (HWSetup *hw,uint8_t u)
include/hw/loader.h +2 -2
@@ -27,7 +27,7 @@ void pstrcpy_targphys(const char *name,int rom_add_file (const char *file,const char *fw_dir,hwaddr addr,int32_t bootindex);int rom_add_blob (const char *name,const void *blob,size_t len, -hwaddr addr); +hwaddr addr,MemoryRegion *mr);int rom_add_elf_program (const char *name,void *data,size_t datasize,size_t romsize,hwaddr addr);int rom_load_all (void );
@@ -39,7 +39,7 @@ void do_info_roms(Monitor *mon, const QDict *qdict);#define rom_add_file_fixed (_f, _a, _i) \ rom_add_file(_f, NULL, _a, _i)#define rom_add_blob_fixed (_f, _b, _l, _a) \ - rom_add_blob(_f, _b, _l, _a) + rom_add_blob(_f, _b, _l, _a, NULL)#define PC_ROM_MIN_VGA 0xc0000#define PC_ROM_MIN_OPTION 0xc8000
Signature · 1 line
MST
Re: [Qemu-devel] [PATCH v2 repost 6/9] loader: support for unmapped ROM blobs
Quoted 4 lines · Michael S. Tsirkin
hw/core/loader.c +0
-0@@ -697,7 +703,12 @@ static void rom_reset(void *unused)if (rom->data ==NULL ) {continue ; }
hw/core/loader.c static void rom_reset(void *unused) · line 714
Quoted 10 lines
hw/core/loader.c +6
-1-cpu_physical_memory_write_rom (rom->addr, rom->data, rom->datasize); +if (rom->mr) { +void *host =memory_region_get_ram_ptr (rom->mr); +memcpy (host, rom->data, rom->datasize); + }else { +cpu_physical_memory_write_rom (rom->addr, rom->data, rom->datasize); + }if (rom->isrom) {/* rom needs to be written only once */ g_free (rom->data);
Can you please explain the difference?
Thanks
Laszlo
Re: [Qemu-devel] [PATCH v2 repost 6/9] loader: support for unmapped ROM blobs
Quoted 19 lines · Laszlo Ersek
Quoted 4 lines · Michael S. Tsirkin
hw/core/loader.c +0
-0@@ -697,7 +703,12 @@ static void rom_reset(void *unused)if (rom->data ==NULL ) {continue ; }hw/core/loader.c static void rom_reset(void *unused) · line 714
Quoted 10 lines
hw/core/loader.c +6
-1-cpu_physical_memory_write_rom (rom->addr, rom->data, rom->datasize); +if (rom->mr) { +void *host =memory_region_get_ram_ptr (rom->mr); +memcpy (host, rom->data, rom->datasize); + }else { +cpu_physical_memory_write_rom (rom->addr, rom->data, rom->datasize); + }if (rom->isrom) {/* rom needs to be written only once */ g_free (rom->data);Can you please explain the difference?
Quoted 2 lines
Thanks
Laszlo
Could you please clarify the question?
If the ROM is not mapped into guest memory, it can't be accessed with cpu_physical_memory_write_rom.
Signature · 1 line
MST
Re: [Qemu-devel] [PATCH v2 repost 6/9] loader: support for unmapped ROM blobs
Quoted 20 lines · Michael S. Tsirkin
Quoted 19 lines · Laszlo Ersek
Quoted 4 lines · Michael S. Tsirkin
hw/core/loader.c +0
-0@@ -697,7 +703,12 @@ static void rom_reset(void *unused)if (rom->data ==NULL ) {continue ; }hw/core/loader.c static void rom_reset(void *unused) · line 714
Quoted 10 lines
hw/core/loader.c +6
-1-cpu_physical_memory_write_rom (rom->addr, rom->data, rom->datasize); +if (rom->mr) { +void *host =memory_region_get_ram_ptr (rom->mr); +memcpy (host, rom->data, rom->datasize); + }else { +cpu_physical_memory_write_rom (rom->addr, rom->data, rom->datasize); + }if (rom->isrom) {/* rom needs to be written only once */ g_free (rom->data);Can you please explain the difference?
Quoted 7 lines
Quoted 2 lines
Thanks
LaszloCould you please clarify the question?
If the ROM is not mapped into guest memory, it can't be accessed with
cpu_physical_memory_write_rom.
Thanks, that's what I wanted to hear :)
Laszlo
Re: [Qemu-devel] [PATCH v2 repost 6/9] loader: support for unmapped ROM blobs
In reply to Michael S. TsirkinQuoted 9 lines · Michael S. Tsirkin
Support ROM blobs not mapped into guest memory:
let user pass in MR for memory serving as the backing store.Signed-off-by Michael S. Tsirkin <[email protected]>--- hw/core/loader.c | 32 +++++++++++++++++++++++++++++--- hw/lm32/lm32_hwsetup.h | 2 +- include/hw/loader.h | 4 ++-- 3 files changed, 32 insertions(+), 6 deletions(-)
PATCH v2 7/9 loader: allow adding ROMs in done callbacks
In reply to Michael S. TsirkinDon't abort if machine done callbacks add ROMs.
--- hw/core/loader.c | 6 +++++- include/hw/loader.h | 1 + vl.c | 3 +++ 3 files changed, 9 insertions(+), 1 deletion(-)
hw/core/loader.c +5 -1
@@ -743,10 +743,14 @@ int rom_load_all(void) rom->isrom =int128_nz (section.size) &&memory_region_is_rom (section.mr); }qemu_register_reset (rom_reset,NULL ); - roms_loaded =1 ;return 0 ; } +void rom_load_done (void ) +{ + roms_loaded =1 ; +} +void rom_set_fw (FWCfgState *f) { fw_cfg = f;
include/hw/loader.h +1 -0
@@ -31,6 +31,7 @@ int rom_add_blob(const char *name, const void *blob, size_t len,int rom_add_elf_program (const char *name,void *data,size_t datasize,size_t romsize,hwaddr addr);int rom_load_all (void ); +void rom_load_done (void );void rom_set_fw (FWCfgState *f);int rom_copy (uint8_t *dest,hwaddr addr,size_t size);void *rom_ptr (hwaddr addr);
vl.c +3 -0
@@ -4377,6 +4377,9 @@ int main(int argc, char **argv, char **envp)qemu_register_reset (qbus_reset_all_fn,sysbus_get_default ());qemu_run_machine_init_done_notifiers (); +/* Done notifiers can load ROMs */ +rom_load_done (); +qemu_system_reset (VMRESET_SILENT );if (loadvm) {if (load_vmstate (loadvm) <0 ) {
Signature · 1 line
MST
Re: [Qemu-devel] [PATCH v2 repost 7/9] loader: allow adding ROMs in done callbacks
Quoted 8 lines · Michael S. Tsirkin
Don't abort if machine done callbacks add ROMs.
Signed-off-by Michael S. Tsirkin <[email protected]>--- hw/core/loader.c | 6 +++++- include/hw/loader.h | 1 + vl.c | 3 +++ 3 files changed, 9 insertions(+), 1 deletion(-)
PATCH v2 8/9 i386: generate pc guest info
In reply to Michael S. TsirkinThis fills in guest info table with misc
information of interest to the guest.
Will be used by ACPI table generation code.
--- hw/acpi/ich9.c | 7 ++++++- hw/acpi/piix4.c | 44 +++++++++++++++++++++++++++++++++++++++++++- hw/i386/Makefile.objs | 2 ++ hw/i386/pc.c | 41 +++++++++++++++++++++++++++++++++++++++-- hw/i386/pc_piix.c | 15 ++++++++++++--- hw/i386/pc_q35.c | 10 +++++++--- hw/isa/lpc_ich9.c | 11 +++++++++-- hw/mips/mips_malta.c | 2 +- hw/misc/pvpanic.c | 12 +++++++----- hw/pci-host/q35.c | 1 + include/hw/acpi/ich9.h | 2 +- include/hw/i386/ich9.h | 3 ++- include/hw/i386/pc.h | 37 ++++++++++++++++++++++++++++++++++--- 13 files changed, 164 insertions(+), 23 deletions(-)
hw/acpi/ich9.c +6 -1
@@ -203,7 +203,7 @@ static void pm_powerdown_req(Notifier *n, void *opaque) }void ich9_pm_init (PCIDevice *lpc_pci,ICH9LPCPMRegs *pm, -qemu_irq sci_irq) +qemu_irq sci_irq,PcGuestInfo *guest_info) {memory_region_init (&pm->io,"ich9-pm" ,ICH9_PMIO_SIZE );memory_region_set_enabled (&pm->io, false);
@@ -219,6 +219,11 @@ void ich9_pm_init(PCIDevice *lpc_pci, ICH9LPCPMRegs *pm, ICH9_PMIO_GPE0_LEN);memory_region_add_subregion (&pm->io,ICH9_PMIO_GPE0_STS , &pm->io_gpe); + guest_info->gpe0_blk =PC_GUEST_PORT_ACPI_PM_BASE +ICH9_PMIO_GPE0_STS ; + guest_info->gpe0_blk_len =ICH9_PMIO_GPE0_LEN ; + guest_info->fix_rtc = true; + guest_info->platform_timer = false; +memory_region_init_io (&pm->io_smi, &ich9_smi_ops, pm,"apci-smi" ,8 );memory_region_add_subregion (&pm->io,ICH9_PMIO_SMI_EN , &pm->io_smi);
hw/acpi/piix4.c +43 -1
74 lines not on this page · raw message
hw/i386/Makefile.objs +2 -0
@@ -5,6 +5,8 @@ obj-$(CONFIG_XEN) += xen_domainbuild.o xen_machine_pv.o obj-y += kvmvapic.o obj-y += bios-linker-loader.o +hw/i386/pc_piix.o: hw/i386/pc_piix.c hw/i386/acpi-dsdt.hex +hw/i386/pc_q35.o: hw/i386/pc_q35.c hw/i386/q35-acpi-dsdt.hex iasl-option=$(shell if test -z "`$(1) $(2) 2>&1 > /dev/null`" \ ; then echo "$(2)"; else echo "$(3)"; fi ;)
hw/i386/pc.c +39 -2
65 lines not on this page · raw message
hw/i386/pc_piix.c +12 -3
@@ -50,6 +50,8 @@# include <xen/hvm/hvm_info_table.h> #endif +#include "hw/i386/acpi-dsdt.hex" +#define MAX_IDE_BUS 2static const int ide_iobase[MAX_IDE_BUS ] = {0x1f0 ,0x170 };
@@ -127,6 +129,10 @@ static void pc_init1(MemoryRegion *system_memory, } guest_info =pc_guest_info_init (below_4g_mem_size, above_4g_mem_size); + + guest_info->dsdt_code = AcpiDsdtAmlCode; + guest_info->dsdt_size =sizeof AcpiDsdtAmlCode; + guest_info->has_pci_info = has_pci_info;/* Set PCI window size the way seabios has always done it. */
@@ -195,7 +201,8 @@ static void pc_init1(MemoryRegion *system_memory,pc_vga_init (isa_bus, pci_enabled ? pci_bus :NULL );/* init basic PC hardware */ -pc_basic_device_init (isa_bus, gsi, &rtc_state, &floppy,xen_enabled ()); +pc_basic_device_init (isa_bus, gsi, &rtc_state, &floppy,xen_enabled (), + guest_info);pc_nic_init (isa_bus, pci_bus);
@@ -234,7 +241,9 @@ static void pc_init1(MemoryRegion *system_memory,/* TODO: Populate SPD eeprom data. */ smbus =piix4_pm_init (pci_bus, piix3_devfn +3 ,0xb100 , gsi[9 ], *smi_irq, -kvm_enabled (), fw_cfg); +kvm_enabled (), fw_cfg, + guest_info); + guest_info->sci_int =9 ;smbus_eeprom_init (smbus,8 ,NULL ,0 ); }
@@ -243,7 +252,7 @@ static void pc_init1(MemoryRegion *system_memory, }if (has_pvpanic) { -pvpanic_init (isa_bus); +pvpanic_init (isa_bus, guest_info); } }
hw/i386/pc_q35.c +7 -3
@@ -43,6 +43,8 @@#include "hw/usb.h" #include "hw/cpu/icc_bus.h" +#include "hw/i386/q35-acpi-dsdt.hex" +/* ICH9 AHCI has 6 ports */ #define MAX_SATA_PORTS 6
@@ -109,6 +111,8 @@ static void pc_q35_init(QEMUMachineInitArgs *args) guest_info =pc_guest_info_init (below_4g_mem_size, above_4g_mem_size); guest_info->has_pci_info = has_pci_info; + guest_info->dsdt_code = Q35AcpiDsdtAmlCode; + guest_info->dsdt_size =sizeof Q35AcpiDsdtAmlCode;/* allocate ram and load rom/bios */ if (!xen_enabled ()) {
@@ -175,10 +179,10 @@ static void pc_q35_init(QEMUMachineInitArgs *args)pc_register_ferr_irq (gsi[13 ]);/* init basic PC hardware */ -pc_basic_device_init (isa_bus, gsi, &rtc_state, &floppy, false); +pc_basic_device_init (isa_bus, gsi, &rtc_state, &floppy, false, guest_info);/* connect pm stuff to lpc */ -ich9_lpc_pm_init (lpc); +ich9_lpc_pm_init (lpc, guest_info);/* ahci and SATA device, for q35 1 ahci controller is built-in */ ahci = pci_create_simple_multifunction(host_bus,
@@ -210,7 +214,7 @@ static void pc_q35_init(QEMUMachineInitArgs *args) }if (has_pvpanic) { -pvpanic_init (isa_bus); +pvpanic_init (isa_bus, guest_info); } }
hw/isa/lpc_ich9.c +9 -2
@@ -312,6 +312,13 @@ PCIINTxRoute ich9_route_intx_pin_to_irq(void *opaque, int pirq_pin)return route; } +void ich9_lpc_set_guest_info (PcGuestInfo *guest_info) +{ + guest_info->sci_int =9 ; + guest_info->acpi_enable_cmd =ICH9_APM_ACPI_ENABLE ; + guest_info->acpi_disable_cmd =ICH9_APM_ACPI_DISABLE ; +} +static int ich9_lpc_sci_irq (ICH9LPCState *lpc) { switch (lpc->d.config[ICH9_LPC_ACPI_CTRL] &
@@ -356,13 +363,13 @@ static void ich9_set_sci(void *opaque, int irq_num, int level) } } -void ich9_lpc_pm_init (PCIDevice *lpc_pci) +void ich9_lpc_pm_init (PCIDevice *lpc_pci,PcGuestInfo *guest_info) {ICH9LPCState *lpc =ICH9_LPC_DEVICE (lpc_pci);qemu_irq *sci_irq; sci_irq =qemu_allocate_irqs (ich9_set_sci, lpc,1 ); -ich9_pm_init (lpc_pci, &lpc->pm, sci_irq[0 ]); +ich9_pm_init (lpc_pci, &lpc->pm, sci_irq[0 ], guest_info);ich9_lpc_reset (&lpc->d.qdev); }
hw/mips/mips_malta.c +1 -1
@@ -964,7 +964,7 @@ void mips_malta_init(QEMUMachineInitArgs *args)pci_piix4_ide_init (pci_bus, hd, piix4_devfn +1 );pci_create_simple (pci_bus, piix4_devfn +2 ,"piix4-usb-uhci" ); smbus =piix4_pm_init (pci_bus, piix4_devfn +3 ,0x1100 , -isa_get_irq (NULL ,9 ),NULL ,0 ,NULL ); +isa_get_irq (NULL ,9 ),NULL ,0 ,NULL ,NULL );/* TODO: Populate SPD eeprom data. */ smbus_eeprom_init (smbus,8 ,NULL ,0 ); pit =pit_init (isa_bus,0x40 ,0 ,NULL );
hw/misc/pvpanic.c +7 -5
@@ -101,25 +101,27 @@ static void pvpanic_isa_realizefn(DeviceState *dev, Error **errp)isa_register_ioport (d, &s->io, s->ioport); } -static void pvpanic_fw_cfg (ISADevice *dev,FWCfgState *fw_cfg) +static void pvpanic_guest_info (ISADevice *dev,PcGuestInfo *guest_info) {PVPanicState *s =ISA_PVPANIC_DEVICE (dev);uint16_t *pvpanic_port =g_malloc (sizeof (*pvpanic_port)); *pvpanic_port =cpu_to_le16 (s->ioport); -fw_cfg_add_file (fw_cfg,"etc/pvpanic-port" , pvpanic_port, +fw_cfg_add_file (guest_info->fw_cfg,"etc/pvpanic-port" , pvpanic_port,sizeof (*pvpanic_port)); + + guest_info->pvpanic_port = s->ioport; } -void pvpanic_init (ISABus *bus) +void pvpanic_init (ISABus *bus,PcGuestInfo *guest_info) {ISADevice *dev; -FWCfgState *fw_cfg =fw_cfg_find (); +FWCfgState *fw_cfg = guest_info->fw_cfg;if (!fw_cfg) {return ; } dev =isa_create_simple (bus,TYPE_ISA_PVPANIC_DEVICE ); -pvpanic_fw_cfg (dev, fw_cfg); +pvpanic_guest_info (dev, guest_info); }static Property pvpanic_isa_properties[] = {
hw/pci-host/q35.c +1 -0
@@ -260,6 +260,7 @@ static int mch_init(PCIDevice *d)*/ mch->guest_info->pci_info.w32.begin =MCH_HOST_BRIDGE_PCIEXBAR_DEFAULT +MCH_HOST_BRIDGE_PCIEXBAR_MAX ; + mch->guest_info->mcfg_base =MCH_HOST_BRIDGE_PCIEXBAR_DEFAULT ;/* setup pci memory regions */ memory_region_init_alias(&mch->pci_hole, "pci-hole",
include/hw/acpi/ich9.h +1 -1
@@ -45,7 +45,7 @@ typedef struct ICH9LPCPMRegs { } ICH9LPCPMRegs;void ich9_pm_init (PCIDevice *lpc_pci,ICH9LPCPMRegs *pm, -qemu_irq sci_irq); +qemu_irq sci_irq,PcGuestInfo *guest_info);void ich9_pm_iospace_update (ICH9LPCPMRegs *pm,uint32_t pm_io_base);extern const VMStateDescription vmstate_ich9_pm;
include/hw/i386/ich9.h +2 -1
@@ -15,10 +15,11 @@#include "hw/acpi/ich9.h" #include "hw/pci/pci_bus.h" +void ich9_lpc_set_guest_info (PcGuestInfo *guest_info);void ich9_lpc_set_irq (void *opaque,int irq_num,int level);int ich9_lpc_map_irq (PCIDevice *pci_dev,int intx);PCIINTxRoute ich9_route_intx_pin_to_irq (void *opaque,int pirq_pin); -void ich9_lpc_pm_init (PCIDevice *pci_lpc); +void ich9_lpc_pm_init (PCIDevice *pci_lpc,PcGuestInfo *guest_info);PCIBus *ich9_d2pbr_init (PCIBus *bus,int devfn,int sec_bus);i2c_bus *ich9_smb_init (PCIBus *bus,int devfn,uint32_t smb_io_base);
include/hw/i386/pc.h +34 -3
@@ -10,6 +10,9 @@#include "hw/i386/ioapic.h" #include "qemu/range.h" +#include "qemu/bitmap.h" +#include "sysemu/sysemu.h" +#include "hw/pci/pci.h" /* PC-style peripherals (also used by other machines). */
@@ -18,9 +21,35 @@ typedef struct PcPciInfo {Range w64; } PcPciInfo; +/* Matches the value hard-coded in BIOS */ +#define PC_GUEST_PORT_ACPI_PM_BASE 0xb000 +struct PcGuestInfo {PcPciInfo pci_info;bool has_pci_info; +hwaddr ram_size; +unsigned apic_id_limit; +bool apic_xrupt_override; +bool has_hpet; +uint64_t numa_nodes; +uint64_t *node_mem; +uint64_t *node_cpu; + DECLARE_BITMAP(found_cpus, MAX_CPUMASK_BITS + 1); +bool s3_disabled; +bool s4_disabled; +uint8_t s4_val; + DECLARE_BITMAP(slot_hotplug_enable, PCI_SLOT_MAX); +uint16_t sci_int; +uint8_t acpi_enable_cmd; +uint8_t acpi_disable_cmd; +uint32_t gpe0_blk; +uint32_t gpe0_blk_len; +bool fix_rtc; +bool platform_timer; +uint64_t mcfg_base; +const unsigned char *dsdt_code; +unsigned dsdt_size; +uint16_t pvpanic_port;FWCfgState *fw_cfg; };
@@ -113,7 +142,8 @@ DeviceState *pc_vga_init(ISABus *isa_bus, PCIBus *pci_bus);void pc_basic_device_init (ISABus *isa_bus,qemu_irq *gsi,ISADevice **rtc_state,ISADevice **floppy, -bool no_vmport); +bool no_vmport, +PcGuestInfo *guest_info);void pc_init_ne2k_isa (ISABus *bus,NICInfo *nd); void pc_cmos_init(ram_addr_t ram_size, ram_addr_t above_4g_mem_size, const char *boot_device,
@@ -131,7 +161,8 @@ void ioapic_init_gsi(GSIState *gsi_state, const char *parent_name);i2c_bus *piix4_pm_init (PCIBus *bus,int devfn,uint32_t smb_io_base,qemu_irq sci_irq,qemu_irq smi_irq, -int kvm_enabled,FWCfgState *fw_cfg); +int kvm_enabled,FWCfgState *fw_cfg, +PcGuestInfo *guest_info);void piix4_smbus_register_device (SMBusDevice *dev,uint8_t addr);/* hpet.c */
@@ -193,7 +224,7 @@ static inline bool isa_ne2000_init(ISABus *bus, int base, int irq, NICInfo *nd)void pc_system_firmware_init (MemoryRegion *rom_memory);/* pvpanic.c */ -void pvpanic_init (ISABus *bus); +void pvpanic_init (ISABus *bus,PcGuestInfo *guest_info);/* e820 types */ #define E820_RAM 1
Signature · 1 line
MST
Re: [Qemu-devel] [PATCH v2 repost 8/9] i386: generate pc guest info
Quoted 5 lines · Michael S. Tsirkin
This fills in guest info table with misc
information of interest to the guest.
Will be used by ACPI table generation code.Signed-off-by Michael S. Tsirkin <[email protected]>
Quoted 15 lines
--- hw/acpi/ich9.c | 7 ++++++- hw/acpi/piix4.c | 44 +++++++++++++++++++++++++++++++++++++++++++- hw/i386/Makefile.objs | 2 ++ hw/i386/pc.c | 41 +++++++++++++++++++++++++++++++++++++++-- hw/i386/pc_piix.c | 15 ++++++++++++--- hw/i386/pc_q35.c | 10 +++++++--- hw/isa/lpc_ich9.c | 11 +++++++++-- hw/mips/mips_malta.c | 2 +- hw/misc/pvpanic.c | 12 +++++++----- hw/pci-host/q35.c | 1 + include/hw/acpi/ich9.h | 2 +- include/hw/i386/ich9.h | 3 ++- include/hw/i386/pc.h | 37 ++++++++++++++++++++++++++++++++++--- 13 files changed, 164 insertions(+), 23 deletions(-)
So we won't be fishing in a global pool of information at ACPI table creation time as I had expected / advertized before. Instead any required bits are gradually collected into the guest info structure while creating / configuring the machine.
This is likely a better approach; the set of dependencies for all ACPI tables together are tracked explicitly in guest info. Also, we don't collect the bits from the outside, breaching encapsulation of devices; devices publish the bits.
Re: [Qemu-devel] [PATCH v2 repost 8/9] i386: generate pc guest info
Quoted 27 lines · Laszlo Ersek
Quoted 5 lines · Michael S. Tsirkin
This fills in guest info table with misc
information of interest to the guest.
Will be used by ACPI table generation code.Signed-off-by Michael S. Tsirkin <[email protected]>Quoted 15 lines
--- hw/acpi/ich9.c | 7 ++++++- hw/acpi/piix4.c | 44 +++++++++++++++++++++++++++++++++++++++++++- hw/i386/Makefile.objs | 2 ++ hw/i386/pc.c | 41 +++++++++++++++++++++++++++++++++++++++-- hw/i386/pc_piix.c | 15 ++++++++++++--- hw/i386/pc_q35.c | 10 +++++++--- hw/isa/lpc_ich9.c | 11 +++++++++-- hw/mips/mips_malta.c | 2 +- hw/misc/pvpanic.c | 12 +++++++----- hw/pci-host/q35.c | 1 + include/hw/acpi/ich9.h | 2 +- include/hw/i386/ich9.h | 3 ++- include/hw/i386/pc.h | 37 ++++++++++++++++++++++++++++++++++--- 13 files changed, 164 insertions(+), 23 deletions(-)So we won't be fishing in a global pool of information at ACPI table creation time as I had expected / advertized before. Instead any required bits are gradually collected into the guest info structure while creating / configuring the machine.
Quoted 6 lines
This is likely a better approach; the set of dependencies for all ACPI tables together are tracked explicitly in guest info. Also, we don't collect the bits from the outside, breaching encapsulation of devices; devices publish the bits.
Reviewed-by Laszlo Ersek <[email protected]>
If I understand correctly, based on the recent comments you got from Gerd and Andreas for this series (in the other, non-repost thread), fishing in the global pool it should be after all, just with a different fishing rod than what I used in my original patch ("hw/i386: build ACPI MADT (APIC) for fw_cfg clients").
These U-turns in design have proved that I'm not qualified to review this work. So I won't; there's no use in my repeated saying "yeah why not" to both approaches (which are polar opposites). My apologies.
I applaud your perseverance in this matter.
Laszlo
Re: [Qemu-devel] [PATCH v2 repost 8/9] i386: generate pc guest info
Quoted 41 lines · Laszlo Ersek
Quoted 27 lines · Laszlo Ersek
Quoted 5 lines · Michael S. Tsirkin
This fills in guest info table with misc
information of interest to the guest.
Will be used by ACPI table generation code.Signed-off-by Michael S. Tsirkin <[email protected]>Quoted 15 lines
--- hw/acpi/ich9.c | 7 ++++++- hw/acpi/piix4.c | 44 +++++++++++++++++++++++++++++++++++++++++++- hw/i386/Makefile.objs | 2 ++ hw/i386/pc.c | 41 +++++++++++++++++++++++++++++++++++++++-- hw/i386/pc_piix.c | 15 ++++++++++++--- hw/i386/pc_q35.c | 10 +++++++--- hw/isa/lpc_ich9.c | 11 +++++++++-- hw/mips/mips_malta.c | 2 +- hw/misc/pvpanic.c | 12 +++++++----- hw/pci-host/q35.c | 1 + include/hw/acpi/ich9.h | 2 +- include/hw/i386/ich9.h | 3 ++- include/hw/i386/pc.h | 37 ++++++++++++++++++++++++++++++++++--- 13 files changed, 164 insertions(+), 23 deletions(-)So we won't be fishing in a global pool of information at ACPI table creation time as I had expected / advertized before. Instead any required bits are gradually collected into the guest info structure while creating / configuring the machine.
Quoted 6 lines
This is likely a better approach; the set of dependencies for all ACPI tables together are tracked explicitly in guest info. Also, we don't collect the bits from the outside, breaching encapsulation of devices; devices publish the bits.
Reviewed-by Laszlo Ersek <[email protected]>If I understand correctly, based on the recent comments you got from Gerd and Andreas for this series (in the other, non-repost thread), fishing in the global pool it should be after all, just with a different fishing rod than what I used in my original patch ("hw/i386: build ACPI MADT (APIC) for
fw_cfgclients").
Quoted 7 lines
These U-turns in design have proved that I'm not qualified to review this work. So I won't; there's no use in my repeated saying "yeah why not" to both approaches (which are polar opposites). My apologies.
I applaud your perseverance in this matter.
Laszlo
Thanks for all your comments so far,
Signature · 1 line
MST
Re: [Qemu-devel] [PATCH v2 repost 8/9] i386: generate pc guest info
In reply to Michael S. Tsirkin<...>
hw/isa/lpc_ich9.c PCIINTxRoute ich9_route_intx_pin_to_irq(void *opaque, int pirq_pin) · line 321
Quoted 7 lines
hw/isa/lpc_ich9.c +7
-0+void ich9_lpc_set_guest_info (PcGuestInfo *guest_info) +{ + guest_info->sci_int =9 ; + guest_info->acpi_enable_cmd =ICH9_APM_ACPI_ENABLE ; + guest_info->acpi_disable_cmd =ICH9_APM_ACPI_DISABLE ; +} +
This function has to be called somewhere(ich9_lpc_pm_init?) to setup acpi_enable_cmd and acpi_disable_cmd, or guest Linux will report:
ACPI Error: No ACPI mode transition supported in this system (enable/disable both zero)
and disable ACPI.
PATCH v2 9/9 i386: ACPI table generation code from seabios
In reply to Michael S. TsirkinThis adds C code for generating ACPI tables at runtime, imported from seabios git tree
commit 51684b7ced75fb76776e8ee84833fcfb6ecf12dd
Although ACPI tables come from a system BIOS on real hw, it makes sense that the ACPI tables are coupled with the virtual machine, since they have to abstract the x86 machine to the OS's.
This is widely desired as a way to avoid the churn and proliferation of QEMU-specific interfaces associated with ACPI tables in bios code.
Notes:
The code structure was intentionally kept as close to the seabios original as possible, to simplify comparison and making sure we didn't lose anything in translation.
Minor code duplication results, to help ensure there are no functional regressions, I think it's better to merge it like this and do more code changes in follow-up patches.
Cross-version compatibility concerns have been addressed:
ACPI tables are exposed to guest as FW_CFG entries. When running with -M 1.5 and older, this patch disables ACPI table generation, and doesn't expose ACPI
tables to guest.
As table content is likely to change over time,
the following measures are taken to simplify
cross-version migration:
- All tables besides the RSDP are packed in a single FW CFG entry. This entry size is currently 23K. We round it up to 64K to avoid too much churn there.
- Tables are placed in special ROM blob (not mapped into guest memory) which is automatically migrated together with the guest, same as BIOS code.
This patch reuses some code from SeaBIOS, which was originally under LGPLv2 and then relicensed to GPLv3 or LGPLv3, in QEMU under GPLv2+. This relicensing has been acked by all contributors that had contributed to the code since the v2->v3 relicense. ACKs approving the v2+ relicensing are listed below. The list might include ACKs from people not holding copyright on any parts of the reused code, but it's better to err on the side of caution and include them.
Affected SeaBIOS files (GPLv2+ license headers added)
<http://thread.gmane.org/gmane.comp.bios.coreboot.seabios/5949>:
src/acpi-dsdt-cpu-hotplug.dsl
src/acpi-dsdt-dbug.dsl
src/acpi-dsdt-hpet.dsl
src/acpi-dsdt-isa.dsl
src/acpi-dsdt-pci-crs.dsl
src/acpi.c
src/acpi.h
src/ssdt-misc.dsl
src/ssdt-pcihp.dsl
src/ssdt-proc.dsl
tools/acpi_extract.py
tools/acpi_extract_preprocess.py
Each one of the listed people agreed to the following:
Quoted 5 lines
If you allow the use of your contribution in QEMU under the terms of GPLv2 or later as proposed by this patch, please respond to this mail including the line:
Acked-by Name <email address>
--- hw/i386/Makefile.objs | 2 + hw/i386/acpi-build.c | 723 +++++++++++++++++++++++++++++++++++++++++++ hw/i386/acpi-defs.h | 327 +++++++++++++++++++ hw/i386/pc.c | 2 + hw/i386/pc_piix.c | 3 + hw/i386/pc_q35.c | 3 + hw/i386/ssdt-misc.dsl | 46 +++ include/hw/i386/acpi-build.h | 9 + include/hw/i386/pc.h | 1 + 9 files changed, 1116 insertions(+) create mode 100644 hw/i386/acpi-build.c create mode 100644 hw/i386/acpi-defs.h create mode 100644 include/hw/i386/acpi-build.h
hw/i386/Makefile.objs +2 -0
@@ -4,7 +4,9 @@ obj-y += pc.o pc_piix.o pc_q35.o obj-$(CONFIG_XEN) += xen_domainbuild.o xen_machine_pv.o obj-y += kvmvapic.o +obj-y += acpi-build.o obj-y += bios-linker-loader.o +hw/i386/acpi-build.o: hw/i386/acpi-build.c hw/i386/acpi-dsdt.hex hw/i386/ssdt-proc.hex hw/i386/ssdt-pcihp.hex hw/i386/ssdt-misc.hex hw/i386/q35-acpi-dsdt.hex hw/i386/pc_piix.o: hw/i386/pc_piix.c hw/i386/acpi-dsdt.hex hw/i386/pc_q35.o: hw/i386/pc_q35.c hw/i386/q35-acpi-dsdt.hex
hw/i386/acpi-build.c new file +723 -0
723 lines not on this page · raw message
hw/i386/acpi-defs.h new file +327 -0
327 lines not on this page · raw message
hw/i386/pc.c +2 -0
@@ -55,6 +55,7 @@#include "hw/acpi/acpi.h" #include "hw/cpu/icc_bus.h" #include "hw/boards.h" +#include "hw/i386/acpi-build.h" /* debug PC/ISA interrupts */ //#define DEBUG_IRQ
@@ -1045,6 +1046,7 @@ void pc_guest_info_machine_done(Notifier *notifier, void *data) PcGuestInfoState, machine_done);pc_fw_cfg_guest_info (&guest_info_state->info); +acpi_setup (&guest_info_state->info); } PcGuestInfo *pc_guest_info_init(ram_addr_t below_4g_mem_size,
hw/i386/pc_piix.c +3 -0
@@ -60,6 +60,7 @@ static const int ide_irq[MAX_IDE_BUS] = { 14, 15 };static bool has_pvpanic = true;static bool has_pci_info = true; +static bool has_acpi_build = true;/* PC hardware initialisation */ static void pc_init1(MemoryRegion *system_memory,
@@ -130,6 +131,7 @@ static void pc_init1(MemoryRegion *system_memory, guest_info =pc_guest_info_init (below_4g_mem_size, above_4g_mem_size); + guest_info->has_acpi_build = has_acpi_build; guest_info->dsdt_code = AcpiDsdtAmlCode; guest_info->dsdt_size =sizeof AcpiDsdtAmlCode;
@@ -274,6 +276,7 @@ static void pc_init_pci(QEMUMachineInitArgs *args)static void pc_init_pci_1_5 (QEMUMachineInitArgs *args) { has_pci_info = false; + has_acpi_build = false;pc_init_pci (args); }
hw/i386/pc_q35.c +3 -0
@@ -50,6 +50,7 @@static bool has_pvpanic = true;static bool has_pci_info = true; +static bool has_acpi_build = true;/* PC hardware initialisation */ static void pc_q35_init (QEMUMachineInitArgs *args)
@@ -111,6 +112,7 @@ static void pc_q35_init(QEMUMachineInitArgs *args) guest_info =pc_guest_info_init (below_4g_mem_size, above_4g_mem_size); guest_info->has_pci_info = has_pci_info; + guest_info->has_acpi_build = has_acpi_build; guest_info->dsdt_code = Q35AcpiDsdtAmlCode; guest_info->dsdt_size =sizeof Q35AcpiDsdtAmlCode;
@@ -221,6 +223,7 @@ static void pc_q35_init(QEMUMachineInitArgs *args)static void pc_q35_init_1_5 (QEMUMachineInitArgs *args) { has_pci_info = false; + has_acpi_build = false;pc_q35_init (args); }
hw/i386/ssdt-misc.dsl +46 -0
50 lines not on this page · raw message
include/hw/i386/acpi-build.h new file +9 -0
@@ -0,0 +1,9 @@ + +#ifndef HW_I386_ACPI_BUILD_H +#define HW_I386_ACPI_BUILD_H + +#include "qemu/typedefs.h" + +void acpi_setup (PcGuestInfo *); + +#endif
include/hw/i386/pc.h +1 -0
@@ -51,6 +51,7 @@ struct PcGuestInfo {unsigned dsdt_size;uint16_t pvpanic_port;FWCfgState *fw_cfg; +bool has_acpi_build; };/* parallel.c */
Signature · 1 line
MST