libglib2 requires threads
cover libglib2 requires threads
This patch removes support for an un-threaded version of libglib2. There were minor cleanups and some bug fixes to various Config.in as well.
See autobuilder failures
http://autobuild.buildroot.net/results/d1fb882fe4d22a17bdd438360da515011dda2b30/build-end.log?
http://autobuild.buildroot.net/results/b66e807769ead5caa3e3b6312e9f7c35c14eafe7/build-end.log?
http://autobuild.buildroot.net/results/9c3fa0c5003a6369e70bfe6d611f7d745742a8c7/build-end.log?
Spenser Gilliland (67):
atk: libglib2 requires threads
bluez_utils: libglib2 requires threads
bustle: libglib2 requires threads
connman: libglib2 requires threads
avahi: libglib2 requires threads
curlftpfs: libglib2 requires threads
dbus-glib: libglib2 requires threads
dbus-python: libglib2 requires threads
docker: libglib2 requires threads
libedbus: libglib2 requires threads
libevas-generic-loaders: libglib2 requires threads
enchant: libglib2 requires threads
enlightenment: libglib2 requires threads
gamin: libglib2 requires threads
gdk-pixbuf: libglib2 requires threads
glib-networking: libglib2 requires threads
glibmm: libglib2 requires threads
gmpc: libglib2 requires threads
gob2: libglib2 requires threads
gvfs: libglib2 requires threads
json-glib: libglib2 requires threads
latencytop: libglib2 requires threads
libgail: libglib2 requires threads
libglade: libglib2 requires threads
libgtk2: libglib2 requires threads
libmms: libglib2 requires threads
libmpd: libglib2 requires threads
libplayer: libglib2 requires threads
libqmi: libglib2 requires threads
librsvg: libglib2 requires threads
libsoup: libglib2 requires threads
libxmlpp: libglib2 requires threads
lttng-babeltrace: libglib2 requires threads
midori: libglib2 requires threads
nbd: libglib2 requires threads
neard: libglib2 requires threads
neardal: libglib2 requires threads
network-manager: libglib2 requires threads
ofono: libglib2 requires threads
opencv: libglib2 requires threads
openobex: libglib2 requires threads
pango: libglib2 requires threads
pcmanfm: libglib2 requires threads
pkg-config: libglib2 requires threads
polkit: libglib2 requires threads
sconeserver: libglib2 requires threads
shared-mime-info: libglib2 requires threads
snowball-init: libglib2 requires threads
sshfs: libglib2 requires threads
sysprof: libglib2 requires threads
udev: libglib2 requires threads
udisks: libglib2 requires threads
ussp-push: libglib2 requires threads
vala: libglib2 requires threads
webkit: libglib2 requires threads
wireshark: libglib2 requires threads
gst-plugin-x170: libglib2 requires threads
gst-plugins-bad: libglib2 requires threads
gst-plugins-base: libglib2 requires threads
gst-plugins-good: libglib2 requires threads
gst1-plugins-good: libglib2 requires threads
gst1-plugins-base: libglib2 requires threads
gst1-plugins-bad: libglib2 requires threads
gstreamer: libglib2 requires threads
gstreamer1: libglib2 requires threads
mpd: libglib2 requires threads
libglib2: needs threads
package/atk/Config.in | 5 ++-- package/avahi/Config.in | 6 +++-- package/bluez_utils/Config.in | 4 +-- package/bustle/Config.in | 5 ++-- package/connman/Config.in | 4 +-- package/curlftpfs/Config.in | 4 +-- package/dbus-glib/Config.in | 6 +++-- package/dbus-python/Config.in | 6 +++-- package/docker/Config.in | 6 +++-- package/efl/libedbus/Config.in | 5 ++++ package/efl/libevas-generic-loaders/Config.in | 5 ++-- package/enchant/Config.in | 6 +++-- package/enlightenment/Config.in | 1 + package/gamin/Config.in | 5 ++-- package/gdk-pixbuf/Config.in | 4 +++ package/glib-networking/Config.in | 5 ++-- package/glibmm/Config.in | 8 +++--- package/gmpc/Config.in | 6 +++-- package/gob2/Config.in | 3 ++- package/gvfs/Config.in | 6 ++--- package/json-glib/Config.in | 5 ++-- package/latencytop/Config.in | 7 ++--- package/libgail/Config.in | 6 +++++ package/libglade/Config.in | 6 +++-- package/libglib2/Config.in | 5 ++-- ...ib2-0002-fix-build-when-no-thread-support.patch | 30 ---------------------- package/libgtk2/Config.in | 11 +++++--- package/libmms/Config.in | 5 ++-- package/libmpd/Config.in | 5 ++-- package/libplayer/Config.in | 3 ++- package/libqmi/Config.in | 4 +++ package/librsvg/Config.in | 5 ++-- package/libsoup/Config.in | 10 +++++--- package/libxmlpp/Config.in | 8 +++--- package/lttng-babeltrace/Config.in | 10 +++++--- package/midori/Config.in | 1 + package/multimedia/gst-plugin-x170/Config.in | 4 +++ package/multimedia/gst-plugins-bad/Config.in | 12 +++++++-- package/multimedia/gst-plugins-base/Config.in | 7 +++-- package/multimedia/gst-plugins-good/Config.in | 10 ++++++++ package/multimedia/gst1-plugins-bad/Config.in | 12 +++++++-- package/multimedia/gst1-plugins-base/Config.in | 7 +++-- package/multimedia/gst1-plugins-good/Config.in | 10 ++++++++ package/multimedia/gstreamer/Config.in | 2 +- package/multimedia/gstreamer1/Config.in | 4 +-- package/multimedia/mpd/Config.in | 8 +++--- package/nbd/Config.in | 9 ++++--- package/neard/Config.in | 11 +++++--- package/neardal/Config.in | 9 ++++--- package/network-manager/Config.in | 6 ++--- package/ofono/Config.in | 9 +++---- package/opencv/Config.in | 10 +++++--- package/openobex/Config.in | 20 ++++++++------- package/pango/Config.in | 6 +++-- package/pcmanfm/Config.in | 6 +++-- package/pkg-config/Config.in | 5 ++-- package/polkit/Config.in | 5 ++-- package/sconeserver/Config.in | 2 +- package/shared-mime-info/Config.in | 5 ++-- package/snowball-init/Config.in | 5 +++- package/sshfs/Config.in | 2 +- package/sysprof/Config.in | 10 +++++--- package/udev/Config.in | 5 ++++ package/udisks/Config.in | 13 +++++++--- package/ussp-push/Config.in | 2 +- package/vala/Config.in | 5 ++-- package/webkit/Config.in | 8 +++--- package/wireshark/Config.in | 5 ++-- 68 files changed, 289 insertions(+), 166 deletions(-) delete mode 100644 package/libglib2/libglib2-0002-fix-build-when-no-thread-support.patch
Signature · 1 line
1.8.1.2
PATCH 1/67 atk: libglib2 requires threads
Signed-off-by Spenser Gilliland <[email protected]>
--- package/atk/Config.in | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
package/atk/Config.in +3 -2
@@ -2,8 +2,9 @@ config BR2_PACKAGE_ATK bool "atk" select BR2_PACKAGE_LIBGLIB2 depends on BR2_USE_WCHAR # glib2 + depends on BR2_TOOLCHAIN_HAS_THREADS # glib2 help The ATK accessibility toolkit, needed to build GTK+-2.x. -comment "atk requires a toolchain with WCHAR support" - depends on !BR2_USE_WCHAR +comment "atk requires a toolchain with WCHAR and threading support" + depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS
Signature · 1 line
1.8.1.2
PATCH 2/67 bluez_utils: libglib2 requires threads
In reply to Spenser GillilandSigned-off-by Spenser Gilliland <[email protected]>
--- package/bluez_utils/Config.in | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
package/bluez_utils/Config.in +2 -2
@@ -2,7 +2,7 @@ config BR2_PACKAGE_BLUEZ_UTILS bool "bluez-utils" depends on !BR2_avr32 depends on BR2_USE_WCHAR # libglib2 - depends on BR2_TOOLCHAIN_HAS_THREADS # dbus, alsa-lib + depends on BR2_TOOLCHAIN_HAS_THREADS # dbus, alsa-lib, libglib2 depends on BR2_USE_MMU # dbus select BR2_PACKAGE_DBUS select BR2_PACKAGE_LIBGLIB2
@@ -38,5 +38,5 @@ config BR2_PACKAGE_BLUEZ_UTILS_USB endif -comment "bluez-utils require a toolchain with WCHAR and thread support" +comment "bluez-utils require a toolchain with WCHAR and threading support" depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS
Signature · 1 line
1.8.1.2
PATCH 3/67 bustle: libglib2 requires threads
In reply to Spenser GillilandSigned-off-by Spenser Gilliland <[email protected]>
--- package/bustle/Config.in | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
package/bustle/Config.in +3 -2
@@ -3,6 +3,7 @@ config BR2_PACKAGE_BUSTLE select BR2_PACKAGE_LIBPCAP select BR2_PACKAGE_LIBGLIB2 depends on BR2_USE_WCHAR # libglib2 + depends on BR2_TOOLCHAIN_HAS_THREADS # libglib2 depends on BR2_PACKAGE_DBUS # runtime help Bustle is a better dbus-monitor! It records and draws
@@ -18,5 +19,5 @@ config BR2_PACKAGE_BUSTLE http://www.willthompson.co.uk/bustle/ -comment "bustle requires a toolchain with WCHAR support" - depends on !BR2_USE_WCHAR +comment "bustle requires a toolchain with WCHAR support and threading support" + depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS
Signature · 1 line
1.8.1.2
PATCH 4/67 connman: libglib2 requires threads
In reply to Spenser GillilandSigned-off-by Spenser Gilliland <[email protected]>
--- package/connman/Config.in | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
package/connman/Config.in +2 -2
@@ -7,7 +7,7 @@ config BR2_PACKAGE_CONNMAN depends on !BR2_UCLIBC_VERSION_0_9_32 depends on BR2_USE_WCHAR # libglib2 and gnutls depends on BR2_INET_IPV6 - depends on BR2_TOOLCHAIN_HAS_THREADS # dbus + depends on BR2_TOOLCHAIN_HAS_THREADS # dbus, libglib2 depends on BR2_USE_MMU # dbus help The Connection Manager (ConnMan) project provides a daemon for
@@ -49,6 +49,6 @@ config BR2_PACKAGE_CONNMAN_CLIENT endif # BR2_PACKAGE_CONNMAN -comment "connman needs a toolchain with IPv6, WCHAR, thread and resolver support" +comment "connman needs a toolchain with IPv6, WCHAR, threading and resolver support" depends on BR2_UCLIBC_VERSION_0_9_32 || \ !BR2_USE_WCHAR || !BR2_INET_IPV6 || !BR2_TOOLCHAIN_HAS_THREADS
Signature · 1 line
1.8.1.2
PATCH 5/67 avahi: minor cleanup
In reply to Spenser GillilandSigned-off-by Spenser Gilliland <[email protected]>
--- package/avahi/Config.in | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
package/avahi/Config.in +4 -2
@@ -10,10 +10,11 @@ config BR2_PACKAGE_AVAHI http://www.avahi.org/ +if BR2_PACKAGE_AVAHI + config BR2_PACKAGE_AVAHI_AUTOIPD bool "IPv4LL network address configuration daemon" default y - depends on BR2_PACKAGE_AVAHI select BR2_PACKAGE_LIBDAEMON help Avahi-autoipd implements IPv4LL, "Dynamic Configuration of
@@ -25,7 +26,6 @@ config BR2_PACKAGE_AVAHI_AUTOIPD config BR2_PACKAGE_AVAHI_DAEMON bool "mDNS/DNS-SD daemon" - depends on BR2_PACKAGE_AVAHI select BR2_PACKAGE_LIBDAEMON select BR2_PACKAGE_EXPAT help
@@ -34,5 +34,7 @@ config BR2_PACKAGE_AVAHI_DAEMON The daemon registers local IP addresses and services using mDNS/DNS-SD. +endif + comment "avahi requires a toolchain with thread support" depends on !BR2_TOOLCHAIN_HAS_THREADS
Signature · 1 line
1.8.1.2
PATCH 6/67 curlftpfs: libglib2 requires threads
In reply to Spenser GillilandSigned-off-by Spenser Gilliland <[email protected]>
--- package/curlftpfs/Config.in | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
package/curlftpfs/Config.in +2 -2
@@ -8,7 +8,7 @@ config BR2_PACKAGE_CURLFTPFS select BR2_PACKAGE_LIBCURL depends on BR2_LARGEFILE depends on BR2_USE_WCHAR # glib2 - depends on BR2_TOOLCHAIN_HAS_THREADS # libfuse + depends on BR2_TOOLCHAIN_HAS_THREADS # libfuse, glib2 depends on BR2_USE_MMU # libfuse depends on !BR2_PREFER_STATIC_LIB # libfuse help
@@ -17,5 +17,5 @@ config BR2_PACKAGE_CURLFTPFS http://curlftpfs.sourceforge.net/ -comment "curlftpfs requires a toolchain with LARGEFILE, WCHAR, threads and dynamic library support" +comment "curlftpfs requires a toolchain with LARGEFILE, WCHAR, threading and dynamic library support" depends on !BR2_LARGEFILE || !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS || BR2_PREFER_STATIC_LIB
Signature · 1 line
1.8.1.2
PATCH 7/67 dbus-glib: libglib2 requires threads
In reply to Spenser GillilandSigned-off-by Spenser Gilliland <[email protected]>
--- package/dbus-glib/Config.in | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
package/dbus-glib/Config.in +4 -2
@@ -2,11 +2,13 @@ config BR2_PACKAGE_DBUS_GLIB bool "dbus-glib" depends on BR2_PACKAGE_DBUS depends on BR2_USE_WCHAR # glib2 + depends on BR2_TOOLCHAIN_HAS_THREADS # glib2 select BR2_PACKAGE_LIBGLIB2 help GLib bindings for D-Bus. http://www.freedesktop.org/software/dbus -comment "dbus-glib requires a toolchain with WCHAR support" - depends on BR2_PACKAGE_DBUS && !BR2_USE_WCHAR +comment "dbus-glib requires a toolchain with WCHAR and threading support" + depends on BR2_PACKAGE_DBUS && \ + (!BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS)
Signature · 1 line
1.8.1.2
PATCH 8/67 dbus-python: libglib2 requires threads
In reply to Spenser GillilandSigned-off-by Spenser Gilliland <[email protected]>
--- package/dbus-python/Config.in | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
package/dbus-python/Config.in +4 -2
@@ -1,6 +1,7 @@ config BR2_PACKAGE_DBUS_PYTHON bool "dbus-python" depends on BR2_USE_WCHAR # glib2 + depends on BR2_TOOLCHAIN_HAS_THREADS # glib2 depends on BR2_PACKAGE_DBUS depends on BR2_PACKAGE_PYTHON select BR2_PACKAGE_DBUS_GLIB
@@ -9,5 +10,6 @@ config BR2_PACKAGE_DBUS_PYTHON http://dbus.freedesktop.org/doc/dbus-python/ -comment "dbus-python requires a toolchain with WCHAR support" - depends on BR2_PACKAGE_DBUS && BR2_PACKAGE_PYTHON && !BR2_USE_WCHAR +comment "dbus-python requires a toolchain with WCHAR and threading support" + depends on BR2_PACKAGE_DBUS && BR2_PACKAGE_PYTHON && \ + (!BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS)
Signature · 1 line
1.8.1.2
PATCH 9/67 docker: libglib2 requires threads
In reply to Spenser GillilandSigned-off-by Spenser Gilliland <[email protected]>
--- package/docker/Config.in | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
package/docker/Config.in +4 -2
@@ -2,6 +2,7 @@ config BR2_PACKAGE_DOCKER bool "docker" depends on BR2_PACKAGE_XORG7 depends on BR2_USE_WCHAR # glib2 + depends on BR2_TOOLCHAIN_HAS_THREADS # glib2 select BR2_PACKAGE_LIBGLIB2 select BR2_PACKAGE_XLIB_LIBX11 help
@@ -9,5 +10,6 @@ config BR2_PACKAGE_DOCKER http://icculus.org/openbox/2/docker -comment "docker requires a toolchain with WCHAR support" - depends on BR2_PACKAGE_XORG7 && !BR2_USE_WCHAR +comment "docker requires a toolchain with WCHAR and threading support" + depends on BR2_PACKAGE_XORG7 && \ + (!BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS)
Signature · 1 line
1.8.1.2
PATCH 10/67 libedbus: libglib2 requires threads
In reply to Spenser GillilandSigned-off-by Spenser Gilliland <[email protected]>
--- package/efl/libedbus/Config.in | 5 +++++ 1 file changed, 5 insertions(+)
package/efl/libedbus/Config.in +5 -0
@@ -17,10 +17,15 @@ if BR2_PACKAGE_LIBEDBUS config BR2_PACKAGE_LIBEDBUS_BLUEZ bool "bluez support" depends on !BR2_avr32 # bluez_utils + depends on BR2_USE_WCHAR # bluez_utils -> glib2 + depends on BR2_TOOLCHAIN_HAS_THREADS # bluez_utils -> glib2 select BR2_PACKAGE_BLUEZ_UTILS help Bluetooth support. +comment "bluez support requires a toolchain with WCHAR and threading support" + depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS + config BR2_PACKAGE_LIBEDBUS_CONNMAN bool "connman support" depends on BR2_PACKAGE_CONNMAN
Signature · 1 line
1.8.1.2
PATCH 11/67 libevas-generic-loaders: libglib2 requires threads
In reply to Spenser GillilandSigned-off-by Spenser Gilliland <[email protected]>
--- package/efl/libevas-generic-loaders/Config.in | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
package/efl/libevas-generic-loaders/Config.in +3 -2
@@ -15,11 +15,12 @@ config BR2_PACKAGE_LIBEVAS_GENERIC_LOADERS_SVG select BR2_PACKAGE_LIBRSVG select BR2_PACKAGE_CAIRO depends on BR2_USE_WCHAR # librsvg -> glib2 + depends on BR2_TOOLCHAIN_HAS_THREADS # librsvg -> glib2 depends on BR2_INSTALL_LIBSTDCPP # librsvg -> pango help This option enables the Evas generic SVG loader -comment "SVG loader requires a toolchain with WCHAR and C++ support" - depends on !BR2_USE_WCHAR && !BR2_INSTALL_LIBSTDCPP +comment "SVG loader requires a toolchain with WCHAR, threading and C++ support" + depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS || !BR2_INSTALL_LIBSTDCPP endif
Signature · 1 line
1.8.1.2
PATCH 12/67 enchant: libglib2 requires threads
In reply to Spenser GillilandSigned-off-by Spenser Gilliland <[email protected]>
--- package/enchant/Config.in | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
package/enchant/Config.in +4 -2
@@ -2,6 +2,7 @@ config BR2_PACKAGE_ENCHANT bool "enchant" depends on BR2_INSTALL_LIBSTDCPP depends on BR2_USE_WCHAR # glib2 + depends on BR2_TOOLCHAIN_HAS_THREADS # glib2 select BR2_PACKAGE_LIBGLIB2 help Enchant is a spell-checking library that provides a consistent
@@ -9,5 +10,6 @@ config BR2_PACKAGE_ENCHANT http://www.abisource.com/projects/enchant/ -comment "enchant requires a toolchain with C++ and WCHAR support enabled" - depends on !BR2_INSTALL_LIBSTDCPP || !BR2_USE_WCHAR +comment "enchant requires a toolchain with C++, threading and WCHAR support enabled" + depends on !BR2_INSTALL_LIBSTDCPP || !BR2_USE_WCHAR || \ + !BR2_TOOLCHAIN_HAS_THREADS
Signature · 1 line
1.8.1.2
PATCH 13/67 enlightenment: libglib2 requires threads
In reply to Spenser GillilandSigned-off-by Spenser Gilliland <[email protected]>
--- package/enlightenment/Config.in | 1 + 1 file changed, 1 insertion(+)
package/enlightenment/Config.in +1 -0
@@ -21,6 +21,7 @@ config BR2_PACKAGE_ENLIGHTENMENT depends on BR2_USE_WCHAR depends on BR2_INSTALL_LIBSTDCPP # libedbus -> dbus + # libedbus -> glib2 depends on BR2_TOOLCHAIN_HAS_THREADS # libedbus -> dbus depends on BR2_USE_MMU
Signature · 1 line
1.8.1.2
PATCH 14/67 gamin: libglib2 requires threads
In reply to Spenser GillilandSigned-off-by Spenser Gilliland <[email protected]>
--- package/gamin/Config.in | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
package/gamin/Config.in +3 -2
@@ -1,11 +1,12 @@ config BR2_PACKAGE_GAMIN bool "gamin" depends on BR2_USE_WCHAR # glib2 + depends on BR2_TOOLCHAIN_HAS_THREADS # glib2 select BR2_PACKAGE_LIBGLIB2 help the File Alteration Monitor http://www.gnome.org/~veillard/gamin/sources -comment "gamin requires a toolchain with WCHAR support" - depends on !BR2_USE_WCHAR +comment "gamin requires a toolchain with WCHAR and threading support" + depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS
Signature · 1 line
1.8.1.2
PATCH 15/67 gdk-pixbuf: libglib2 requires threads
In reply to Spenser GillilandSigned-off-by Spenser Gilliland <[email protected]>
--- package/gdk-pixbuf/Config.in | 4 ++++ 1 file changed, 4 insertions(+)
package/gdk-pixbuf/Config.in +4 -0
@@ -1,6 +1,7 @@ config BR2_PACKAGE_GDK_PIXBUF bool "gdk-pixbuf" depends on BR2_USE_WCHAR # glib2 + depends on BR2_TOOLCHAIN_HAS_THREADS # glib2 select BR2_PACKAGE_LIBGLIB2 select BR2_PACKAGE_GETTEXT if BR2_NEEDS_GETTEXT select BR2_PACKAGE_LIBICONV if !BR2_ENABLE_LOCALE
@@ -9,3 +10,6 @@ config BR2_PACKAGE_GDK_PIXBUF and the GLib, to integrate well with GNOME applications. http://www.gtk.org/ + +comment "gdk-pixbuf depends on toolchain with WCHAR and threading support" + depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS
Signature · 1 line
1.8.1.2
PATCH 16/67 glib-networking: libglib2 requires threads
In reply to Spenser GillilandSigned-off-by Spenser Gilliland <[email protected]>
--- package/glib-networking/Config.in | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
package/glib-networking/Config.in +3 -2
@@ -1,10 +1,11 @@ config BR2_PACKAGE_GLIB_NETWORKING bool "glib-networking" depends on BR2_USE_WCHAR # glib2 + depends on BR2_TOOLCHAIN_HAS_THREADS # glib2 select BR2_PACKAGE_LIBGLIB2 select BR2_PACKAGE_GETTEXT if BR2_NEEDS_GETTEXT help Network-related GIO modules for glib. -comment "glib-networking requires a toolchain with WCHAR support" - depends on !BR2_USE_WCHAR +comment "glib-networking requires a toolchain with WCHAR and threading support" + depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS
Signature · 1 line
1.8.1.2
PATCH 17/67 glibmm: libglib2 requires threads
In reply to Spenser GillilandSigned-off-by Spenser Gilliland <[email protected]>
--- package/glibmm/Config.in | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-)
package/glibmm/Config.in +5 -3
@@ -3,11 +3,13 @@ config BR2_PACKAGE_GLIBMM select BR2_PACKAGE_LIBGLIB2 select BR2_PACKAGE_LIBSIGC depends on BR2_INSTALL_LIBSTDCPP - depends on BR2_USE_WCHAR + depends on BR2_USE_WCHAR # libglib2 + depends on BR2_TOOLCHAIN_HAS_THREADS # libglib2 help The GLibmm package is a set of C++ bindings for GLib. http://www.gtkmm.org/ -comment "glibmm requires a toolchain with C++ & WCHAR support enabled" - depends on !BR2_INSTALL_LIBSTDCPP || !BR2_USE_WCHAR +comment "glibmm requires a toolchain with C++, WCHAR, and threading support" + depends on !BR2_INSTALL_LIBSTDCPP || !BR2_USE_WCHAR || \ + !BR2_TOOLCHAIN_HAS_THREADS
Signature · 1 line
1.8.1.2
PATCH 18/67 gmpc: libglib2 requires threads
In reply to Spenser GillilandSigned-off-by Spenser Gilliland <[email protected]>
--- package/gmpc/Config.in | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
package/gmpc/Config.in +4 -2
@@ -2,6 +2,7 @@ config BR2_PACKAGE_GMPC bool "gmpc" depends on BR2_PACKAGE_LIBGTK2 depends on BR2_USE_WCHAR # glib2 + depends on BR2_TOOLCHAIN_HAS_THREADS # glib2 depends on BR2_PACKAGE_XORG7 select BR2_PACKAGE_LIBGLIB2 select BR2_PACKAGE_GETTEXT if BR2_NEEDS_GETTEXT_IF_LOCALE
@@ -19,5 +20,6 @@ config BR2_PACKAGE_GMPC http://gmpcwiki.sarine.nl/index.php?title=GMPC -comment "gmpc requires a toolchain with WCHAR support" - depends on BR2_PACKAGE_LIBGTK2 && !BR2_USE_WCHAR +comment "gmpc requires a toolchain with WCHAR and threading support" + depends on BR2_PACKAGE_LIBGTK2 && !BR2_USE_WCHAR || \ + !BR2_TOOLCHAIN_HAS_THREADS
Signature · 1 line
1.8.1.2
PATCH 19/67 gob2: libglib2 requires threads
In reply to Spenser GillilandSigned-off-by Spenser Gilliland <[email protected]>
--- package/gob2/Config.in | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
package/gob2/Config.in +2 -1
@@ -1,6 +1,7 @@ config BR2_PACKAGE_GOB2 bool "gob2" depends on BR2_USE_WCHAR # glib2 + depends on BR2_TOOLCHAIN_HAS_THREADS # glib2 # m4 uses fork(), so does bison then depends on BR2_USE_MMU select BR2_PACKAGE_LIBGLIB2
@@ -13,4 +14,4 @@ config BR2_PACKAGE_GOB2 http://www.jirka.org/gob.html comment "gob2 requires a toolchain with WCHAR support" - depends on !BR2_USE_WCHAR + depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS
Signature · 1 line
1.8.1.2
PATCH 20/67 gvfs: libglib2 requires threads
In reply to Spenser GillilandSigned-off-by Spenser Gilliland <[email protected]>
--- package/gvfs/Config.in | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
package/gvfs/Config.in +3 -3
@@ -3,7 +3,7 @@ config BR2_PACKAGE_GVFS depends on BR2_LARGEFILE depends on BR2_USE_WCHAR # glib2 depends on BR2_USE_MMU # dbus - depends on BR2_TOOLCHAIN_HAS_THREADS # dbus + depends on BR2_TOOLCHAIN_HAS_THREADS # dbus, glib2 select BR2_PACKAGE_LIBGLIB2 select BR2_PACKAGE_DBUS select BR2_PACKAGE_SHARED_MIME_INFO
@@ -16,5 +16,5 @@ config BR2_PACKAGE_GVFS http://en.wikipedia.org/wiki/GVFS -comment "gvfs requires a toolchain with LARGEFILE and WCHAR support" - depends on !BR2_LARGEFILE || !BR2_USE_WCHAR +comment "gvfs requires a toolchain with LARGEFILE, WCHAR and threading support" + depends on !BR2_LARGEFILE || !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS
Signature · 1 line
1.8.1.2
PATCH 21/67 json-glib: libglib2 requires threads
In reply to Spenser GillilandSigned-off-by Spenser Gilliland <[email protected]>
--- package/json-glib/Config.in | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
package/json-glib/Config.in +3 -2
@@ -1,6 +1,7 @@ config BR2_PACKAGE_JSON_GLIB bool "json-glib" depends on BR2_USE_WCHAR # glib2 + depends on BR2_TOOLCHAIN_HAS_THREADS # glib2 select BR2_PACKAGE_LIBGLIB2 select BR2_PACKAGE_GETTEXT if BR2_NEEDS_GETTEXT help
@@ -10,5 +11,5 @@ config BR2_PACKAGE_JSON_GLIB https://live.gnome.org/JsonGlib/ -comment "json-glib requires a toolchain with WCHAR support" - depends on !BR2_USE_WCHAR +comment "json-glib requires a toolchain with WCHAR and threading support" + depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS
Signature · 1 line
1.8.1.2
PATCH 22/67 latencytop: libglib2 requires threads
In reply to Spenser GillilandSigned-off-by Spenser Gilliland <[email protected]>
--- package/latencytop/Config.in | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)
package/latencytop/Config.in +4 -3
@@ -1,6 +1,7 @@ config BR2_PACKAGE_LATENCYTOP bool "latencytop" - depends on BR2_USE_WCHAR + depends on BR2_USE_WCHAR # libglib2 + depends on BR2_TOOLCHAIN_HAS_THREADS # libglib2 select BR2_PACKAGE_NCURSES select BR2_PACKAGE_LIBGLIB2 help
@@ -19,5 +20,5 @@ config BR2_PACKAGE_LATENCYTOP http://www.latencytop.org -comment "latencytop requires a toolchain with WCHAR support" - depends on !BR2_USE_WCHAR +comment "latencytop requires a toolchain with WCHAR and threading support" + depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS
Signature · 1 line
1.8.1.2
PATCH 23/67 libgail: libglib2 requires threads
In reply to Spenser GillilandSigned-off-by Spenser Gilliland <[email protected]>
--- package/libgail/Config.in | 6 ++++++ 1 file changed, 6 insertions(+)
package/libgail/Config.in +6 -0
@@ -1,5 +1,7 @@ config BR2_PACKAGE_LIBGAIL bool "libgail" + depends on BR2_USE_WCHAR # pango -> libglib2 + depends on BR2_TOOLCHAIN_HAS_THREADS # pango -> libglib2 depends on BR2_PACKAGE_LIBGTK2 select BR2_PACKAGE_PANGO help
@@ -16,3 +18,7 @@ config BR2_PACKAGE_LIBGAIL program. http://developer.gnome.org/projects/gap + +comment "libgail requires a toolchain with WCHAR and threading support" + depends on BR2_PACKAGE_LIBGTK2 && \ + (!BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS)
Signature · 1 line
1.8.1.2
PATCH 23/67 libgail: libglib2 requires threads
Dear Spenser Gilliland,
Quoted 19 lines · Spenser Gilliland
Signed-off-by Spenser Gilliland <[email protected]>--- package/libgail/Config.in | 6 ++++++ 1 file changed, 6 insertions(+)package/libgail/Config.in +2
-0@@ -1,5 +1,7 @@ config BR2_PACKAGE_LIBGAIL bool "libgail" + depends on BR2_USE_WCHAR # pango -> libglib2 + depends on BR2_TOOLCHAIN_HAS_THREADS # pango -> libglib2 depends on BR2_PACKAGE_LIBGTK2 select BR2_PACKAGE_PANGO help
package/libgail/Config.in config BR2_PACKAGE_LIBGAIL · line 24
Quoted 7 lines
package/libgail/Config.in +4
-0@@ -16,3 +18,7 @@ config BR2_PACKAGE_LIBGAIL program. http://developer.gnome.org/projects/gap + +comment "libgail requires a toolchain with WCHAR and threading support" + depends on BR2_PACKAGE_LIBGTK2 && \ + (!BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS)
This one doesn't seem useful: the libgail package already has a dependency on libgtk2, so it can't be enabled if gtk2 is not enabled. And gtk2 can only be enabled if wchar and threads are available.
So this patch is not useful.
Remember: propagation of "depends on" is needed from package A to package B when package B selects package A. If package B depends on package A, then there's no point in propagating the "depends on" of package A to package B.
More aspirin? :-)
Thomas
Signature · 4 lines
Thomas Petazzoni, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com
PATCH 24/67 libglade: libglib2 requires threads
In reply to Spenser GillilandSigned-off-by Spenser Gilliland <[email protected]>
--- package/libglade/Config.in | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
package/libglade/Config.in +4 -2
@@ -2,6 +2,7 @@ config BR2_PACKAGE_LIBGLADE bool "libglade" depends on BR2_PACKAGE_LIBGTK2 depends on BR2_USE_WCHAR # glib2 + depends on BR2_TOOLCHAIN_HAS_THREADS # glib2 select BR2_PACKAGE_LIBGLIB2 select BR2_PACKAGE_ATK select BR2_PACKAGE_LIBXML2
@@ -12,5 +13,6 @@ config BR2_PACKAGE_LIBGLADE http://ftp.gnome.org/pub/GNOME/sources/libglade/ -comment "libglade requires a toolchain with WCHAR support" - depends on BR2_PACKAGE_LIBGTK2 && !BR2_USE_WCHAR +comment "libglade requires a toolchain with WCHAR and threading support" + depends on BR2_PACKAGE_LIBGTK2 && \ + (!BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS)
Signature · 1 line
1.8.1.2
PATCH 24/67 libglade: libglib2 requires threads
Dear Spenser Gilliland,
Quoted 19 lines · Spenser Gilliland
Signed-off-by Spenser Gilliland <[email protected]>--- package/libglade/Config.in | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)package/libglade/Config.in +1
-0@@ -2,6 +2,7 @@ config BR2_PACKAGE_LIBGLADE bool "libglade" depends on BR2_PACKAGE_LIBGTK2 depends on BR2_USE_WCHAR # glib2 + depends on BR2_TOOLCHAIN_HAS_THREADS # glib2 select BR2_PACKAGE_LIBGLIB2 select BR2_PACKAGE_ATK select BR2_PACKAGE_LIBXML2
package/libglade/Config.in config BR2_PACKAGE_LIBGLADE · line 18
Quoted 8 lines
package/libglade/Config.in +3
-2@@ -12,5 +13,6 @@ config BR2_PACKAGE_LIBGLADE http://ftp.gnome.org/pub/GNOME/sources/libglade/ -comment "libglade requires a toolchain with WCHAR support" - depends on BR2_PACKAGE_LIBGTK2 && !BR2_USE_WCHAR +comment "libglade requires a toolchain with WCHAR and threading support" + depends on BR2_PACKAGE_LIBGTK2 && \ + (!BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS)
I also believe this one is not needed, because there is already a "depends on BR2_PACKAGE_LIBGTK2".
Thomas
Signature · 4 lines
Thomas Petazzoni, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com
PATCH 25/67 libgtk2: libglib2 requires threads
In reply to Spenser Gillilandminor clean up as well.
Signed-off-by Spenser Gilliland <[email protected]>
--- package/libgtk2/Config.in | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-)
package/libgtk2/Config.in +8 -3
@@ -14,18 +14,23 @@ config BR2_PACKAGE_LIBGTK2 select BR2_PACKAGE_XLIB_LIBXRENDER depends on BR2_PACKAGE_XORG7 depends on BR2_USE_WCHAR # glib2 + depends on BR2_TOOLCHAIN_HAS_THREADS # glib2 depends on BR2_INSTALL_LIBSTDCPP # pango help The GTK+ version 2 graphical user interface library http://www.gtk.org/ +if BR2_PACKAGE_LIBGTK2 + config BR2_PACKAGE_LIBGTK2_DEMO bool "Install libgtk2 demo program" - depends on BR2_PACKAGE_LIBGTK2 help The GTK+ source base contains a gtk-demo program. This option allows to install this program to the target. -comment "libgtk2 requires a toolchain with WCHAR and C++ support" - depends on !BR2_USE_WCHAR || !BR2_INSTALL_LIBSTDCPP +endif + +comment "libgtk2 requires a toolchain with WCHAR, threading and C++ support" + depends on !BR2_USE_WCHAR || !BR2_INSTALL_LIBSTDCPP || \ + !BR2_TOOLCHAIN_HAS_THREADS
Signature · 1 line
1.8.1.2
PATCH 26/67 libmms: libglib2 requires threads
In reply to Spenser GillilandSigned-off-by Spenser Gilliland <[email protected]>
--- package/libmms/Config.in | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
package/libmms/Config.in +3 -2
@@ -1,6 +1,7 @@ config BR2_PACKAGE_LIBMMS bool "libmms" depends on BR2_USE_WCHAR # glib2 + depends on BR2_TOOLCHAIN_HAS_THREADS # glib2 select BR2_PACKAGE_LIBGLIB2 help LibMMS is a common library for parsing mms:// and mmsh://
@@ -11,5 +12,5 @@ config BR2_PACKAGE_LIBMMS http://launchpad.net/libmms -comment "libmms requires a toolchain with WCHAR support" - depends on !BR2_USE_WCHAR +comment "libmms requires a toolchain with WCHAR and threading support" + depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS
Signature · 1 line
1.8.1.2
PATCH 27/67 libmpd: libglib2 requires threads
In reply to Spenser GillilandSigned-off-by Spenser Gilliland <[email protected]>
--- package/libmpd/Config.in | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
package/libmpd/Config.in +3 -2
@@ -1,6 +1,7 @@ config BR2_PACKAGE_LIBMPD bool "libmpd" depends on BR2_USE_WCHAR # glib2 + depends on BR2_TOOLCHAIN_HAS_THREADS # glib2 select BR2_PACKAGE_LIBGLIB2 select BR2_PACKAGE_LIBICONV if !BR2_ENABLE_LOCALE help
@@ -10,5 +11,5 @@ config BR2_PACKAGE_LIBMPD http://gmpcwiki.sarine.nl/index.php?title=Libmpd -comment "libmpd requires a toolchain with WCHAR support" - depends on !BR2_USE_WCHAR +comment "libmpd requires a toolchain with WCHAR and threading support" + depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS
Signature · 1 line
1.8.1.2
PATCH 28/67 libplayer: libglib2 requires threads
In reply to Spenser GillilandSigned-off-by Spenser Gilliland <[email protected]>
--- package/libplayer/Config.in | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
package/libplayer/Config.in +2 -1
@@ -21,9 +21,10 @@ config BR2_PACKAGE_LIBPLAYER_MPLAYER config BR2_PACKAGE_LIBPLAYER_GSTREAMER bool "gstreamer backend" depends on BR2_USE_WCHAR # glib2 + depends on BR2_TOOLCHAIN_HAS_THREADS # glib2 select BR2_PACKAGE_GSTREAMER -comment "gstreamer backend requires a toolchain with WCHAR support" +comment "gstreamer backend requires a toolchain with WCHAR and threading support" depends on !BR2_USE_WCHAR config BR2_PACKAGE_LIBPLAYER_PYTHON
Signature · 1 line
1.8.1.2
PATCH 29/67 libqmi: libglib2 requires threads
In reply to Spenser GillilandSigned-off-by Spenser Gilliland <[email protected]>
--- package/libqmi/Config.in | 4 ++++ 1 file changed, 4 insertions(+)
package/libqmi/Config.in +4 -0
@@ -2,8 +2,12 @@ config BR2_PACKAGE_LIBQMI bool "libqmi" select BR2_PACKAGE_LIBGLIB2 depends on BR2_USE_WCHAR # libglib2 + depends on BR2_TOOLCHAIN_HAS_THREADS # libglib2 help libqmi is a glib-based library for talking to WWAN modems and devices which speak the Qualcomm MSM Interface (QMI) protocol. http://www.freedesktop.org/wiki/Software/libqmi/ + +comment "libqmi requires a toolchain with WCHAR and threading support" + depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS
Signature · 1 line
1.8.1.2
PATCH 30/67 librsvg: libglib2 requires threads
In reply to Spenser GillilandSigned-off-by Spenser Gilliland <[email protected]>
--- package/librsvg/Config.in | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
package/librsvg/Config.in +3 -2
@@ -7,6 +7,7 @@ config BR2_PACKAGE_LIBRSVG select BR2_PACKAGE_LIBGLIB2 select BR2_PACKAGE_GDK_PIXBUF depends on BR2_USE_WCHAR # glib2 + depends on BR2_TOOLCHAIN_HAS_THREADS # glib2 depends on BR2_INSTALL_LIBSTDCPP # pango help The rsvg library is an efficient renderer for Scalable
@@ -14,5 +15,5 @@ config BR2_PACKAGE_LIBRSVG http://librsvg.sourceforge.net/ -comment "librsvg requires a toolchain with WCHAR and C++ support" - depends on !BR2_USE_WCHAR || !BR2_INSTALL_LIBSTDCPP +comment "librsvg requires a toolchain with WCHAR, threading and C++ support" + depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS || !BR2_INSTALL_LIBSTDCPP
Signature · 1 line
1.8.1.2
PATCH 31/67 libsoup: libglib2 requires threads
In reply to Spenser Gillilandminor cleanup as well
Signed-off-by Spenser Gilliland <[email protected]>
--- package/libsoup/Config.in | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-)
package/libsoup/Config.in +7 -3
@@ -1,6 +1,7 @@ config BR2_PACKAGE_LIBSOUP bool "libsoup" depends on BR2_USE_WCHAR # glib2 and gnutls + depends on BR2_TOOLCHAIN_HAS_THREADS # glib2 select BR2_PACKAGE_LIBXML2 select BR2_PACKAGE_LIBGLIB2 select BR2_PACKAGE_GETTEXT if BR2_NEEDS_GETTEXT
@@ -12,13 +13,16 @@ config BR2_PACKAGE_LIBSOUP http://live.gnome.org/LibSoup +if BR2_PACKAGE_LIBSOUP + config BR2_PACKAGE_LIBSOUP_SSL bool "https support" select BR2_PACKAGE_GLIB_NETWORKING select BR2_PACKAGE_GNUTLS - depends on BR2_PACKAGE_LIBSOUP help Enable HTTPS (SSL) support. -comment "libsoup requires a toolchain with WCHAR support" - depends on !BR2_USE_WCHAR +endif + +comment "libsoup requires a toolchain with WCHAR and threading support" + depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS
Signature · 1 line
1.8.1.2
PATCH 32/67 libxmlpp: libglib2 requires threads
In reply to Spenser GillilandSigned-off-by Spenser Gilliland <[email protected]>
--- package/libxmlpp/Config.in | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-)
package/libxmlpp/Config.in +5 -3
@@ -3,11 +3,13 @@ config BR2_PACKAGE_LIBXMLPP select BR2_PACKAGE_LIBXML2 select BR2_PACKAGE_GLIBMM depends on BR2_INSTALL_LIBSTDCPP - depends on BR2_USE_WCHAR + depends on BR2_USE_WCHAR # glibmm -> libglib2 + depends on BR2_TOOLCHAIN_HAS_THREADS # glibmm -> libglib2 help libxml++ is a C++ wrapper for the libxml XML parser library. http://libxmlplusplus.sourceforge.net/ -comment "libxml++ requires a toolchain with C++ & WCHAR support enabled" - depends on !BR2_INSTALL_LIBSTDCPP || !BR2_USE_WCHAR +comment "libxml++ requires a toolchain with C++, WCHAR and threading support" + depends on !BR2_INSTALL_LIBSTDCPP || !BR2_USE_WCHAR || \ + !BR2_TOOLCHAIN_HAS_THREADS
Signature · 1 line
1.8.1.2
PATCH 33/67 lttng-babeltrace: libglib2 requires threads
In reply to Spenser GillilandSigned-off-by Spenser Gilliland <[email protected]>
--- package/lttng-babeltrace/Config.in | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-)
package/lttng-babeltrace/Config.in +6 -4
@@ -4,9 +4,10 @@ config BR2_PACKAGE_LTTNG_BABELTRACE select BR2_PACKAGE_UTIL_LINUX select BR2_PACKAGE_UTIL_LINUX_LIBUUID select BR2_PACKAGE_LIBGLIB2 - # libglib2 needs gettext which needs wchar support, and we - # also depends on util-linux which needs wchar + # libglib2 needs thread support and gettext which needs wchar support, and + # we also depends on util-linux which needs wchar depends on BR2_USE_WCHAR + depends on BR2_TOOLCHAIN_HAS_THREADS # util-linux depends on largefile support depends on BR2_LARGEFILE help
@@ -26,5 +27,6 @@ config BR2_PACKAGE_LTTNG_BABELTRACE http://lttng.org -comment "lttng-babeltrace needs WCHAR and LARGEFILE support" - depends on BR2_PACKAGE_LTTNG_TOOLS && !(BR2_USE_WCHAR || BR2_LARGEFILE) +comment "lttng-babeltrace needs WCHAR, threading and LARGEFILE support" + depends on BR2_PACKAGE_LTTNG_TOOLS && \ + (!BR2_USE_WCHAR || !BR2_LARGEFILE || !BR2_TOOLCHAIN_HAS_THREADS)
Signature · 1 line
1.8.1.2
PATCH 34/67 midori: libglib2 requires threads
In reply to Spenser GillilandSigned-off-by Spenser Gilliland <[email protected]>
--- package/midori/Config.in | 1 + 1 file changed, 1 insertion(+)
package/midori/Config.in +1 -0
@@ -6,6 +6,7 @@ config BR2_PACKAGE_MIDORI select BR2_PACKAGE_LIBICONV if !BR2_ENABLE_LOCALE depends on BR2_PACKAGE_LIBGTK2 depends on BR2_INSTALL_LIBSTDCPP # webkit + depends on BR2_TOOLCHAIN_HAS_THREADS # webkit -> enchant -> libglib2 depends on BR2_USE_WCHAR # webkit help Midori is a lightweight web browser based on WebKit
Signature · 1 line
1.8.1.2
PATCH 35/67 nbd: libglib2 requires threads
In reply to Spenser Gillilandminor cleanup as well
Signed-off-by Spenser Gilliland <[email protected]>
--- package/nbd/Config.in | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-)
package/nbd/Config.in +6 -3
@@ -1,6 +1,7 @@ config BR2_PACKAGE_NBD bool "nbd" depends on BR2_USE_WCHAR # glib2 + depends on BR2_TOOLCHAIN_HAS_THREADS # glib2 select BR2_PACKAGE_LIBGLIB2 help NBD is a set of utilities to configure network block devices,
@@ -8,9 +9,6 @@ config BR2_PACKAGE_NBD http://nbd.sf.net/ -comment "nbd requires a toolchain with WCHAR support" - depends on !BR2_USE_WCHAR - if BR2_PACKAGE_NBD config BR2_NBD_CLIENT
@@ -25,3 +23,8 @@ config BR2_NBD_SERVER the server part of NBD. endif + +comment "nbd requires a toolchain with WCHAR and threading support" + depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS + +
Signature · 1 line
1.8.1.2
PATCH 36/67 neard: libglib2 requires threads
In reply to Spenser Gillilandminor clean up as well
Signed-off-by Spenser Gilliland <[email protected]>
--- package/neard/Config.in | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-)
package/neard/Config.in +7 -4
@@ -1,7 +1,7 @@ config BR2_PACKAGE_NEARD bool "neard" depends on BR2_USE_WCHAR # libglib2 - depends on BR2_TOOLCHAIN_HAS_THREADS # libnl / dbus + depends on BR2_TOOLCHAIN_HAS_THREADS # libnl, dbus, libglib2 depends on BR2_USE_MMU # dbus select BR2_PACKAGE_DBUS select BR2_PACKAGE_LIBGLIB2
@@ -14,11 +14,14 @@ config BR2_PACKAGE_NEARD https://01.org/linux-nfc/documentation/how-start-linux-nfc-code... +if BR2_PACKAGE_NEARD + config BR2_PACKAGE_NEARD_TOOLS bool "neard tools" - depends on BR2_PACKAGE_NEARD help Build and install neard tools. -comment "neard requires a toolchain with WCHAR and threads support" - depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS +endif + +comment "neard requires an MMU and a toolchain with WCHAR and threads support" + depends on !BR2_USE_MMU || !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS
Signature · 1 line
1.8.1.2
PATCH 37/67 neardal: libglib2 requires threads
In reply to Spenser Gillilandminor cleanups as well
Signed-off-by Spenser Gilliland <[email protected]>
--- package/neardal/Config.in | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-)
package/neardal/Config.in +6 -3
@@ -1,7 +1,7 @@ config BR2_PACKAGE_NEARDAL bool "neardal" depends on BR2_USE_WCHAR # glib2 - depends on BR2_TOOLCHAIN_HAS_THREADS # dbus + depends on BR2_TOOLCHAIN_HAS_THREADS # dbus, glib2 depends on BR2_USE_MMU # dbus select BR2_PACKAGE_DBUS select BR2_PACKAGE_DBUS_GLIB
@@ -11,11 +11,14 @@ config BR2_PACKAGE_NEARDAL https://github.com/connectivity/neardal +if BR2_PACKAGE_NEARDAL + config BR2_PACKAGE_NEARDAL_NCL bool "ncl tool" - depends on BR2_PACKAGE_NEARDAL help Build and install neardal ncl command line interpreter tool. -comment "neardal requires a toolchain with WCHAR and threads support" +endif + +comment "neardal requires a toolchain with WCHAR and threading support" depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS
Signature · 1 line
1.8.1.2
PATCH 38/67 network-manager: libglib2 requires threads
In reply to Spenser GillilandSigned-off-by Spenser Gilliland <[email protected]>
--- package/network-manager/Config.in | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
package/network-manager/Config.in +3 -3
@@ -5,7 +5,7 @@ config BR2_PACKAGE_NETWORK_MANAGER depends on BR2_INET_IPV6 depends on BR2_LARGEFILE # acl depends on BR2_USE_WCHAR # libglib2 and gnutls - depends on BR2_TOOLCHAIN_HAS_THREADS # dbus + depends on BR2_TOOLCHAIN_HAS_THREADS # dbus, libglib2 depends on BR2_USE_MMU # dbus select BR2_PACKAGE_DBUS_GLIB select BR2_PACKAGE_UDEV
@@ -27,6 +27,6 @@ config BR2_PACKAGE_NETWORK_MANAGER http://projects.gnome.org/NetworkManager/ -comment "NetworkManager requires a toolchain with IPV6, LARGEFILE, WCHAR and thread support" - depends on !BR2_INET_IPV6 || !BR2_LARGEFILE || !BR2_USE_WCHAR || \ +comment "NetworkManager requires an MMU and a toolchain with IPV6, LARGEFILE, WCHAR and thread support" + depends on !BR2_USE_MMU || !BR2_INET_IPV6 || !BR2_LARGEFILE || !BR2_USE_WCHAR || \ !BR2_TOOLCHAIN_HAS_THREADS
Signature · 1 line
1.8.1.2
PATCH 39/67 ofono: libglib2 requires threads
In reply to Spenser GillilandSigned-off-by Spenser Gilliland <[email protected]>
--- package/ofono/Config.in | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-)
package/ofono/Config.in +4 -5
@@ -1,7 +1,7 @@ config BR2_PACKAGE_OFONO bool "ofono" - depends on BR2_USE_WCHAR # gettext/libglib2 - depends on BR2_TOOLCHAIN_HAS_THREADS # dbus + depends on BR2_USE_WCHAR # gettext, libglib2 + depends on BR2_TOOLCHAIN_HAS_THREADS # dbus, libglib2 depends on BR2_USE_MMU # dbus select BR2_PACKAGE_LIBCAP_NG select BR2_PACKAGE_DBUS
@@ -14,6 +14,5 @@ config BR2_PACKAGE_OFONO http://ofono.org/ -comment "ofono requires a toolchain with WCHAR and thread support" - depends on !BR2_USE_WCHAR || \ - !BR2_TOOLCHAIN_HAS_THREADS +comment "ofono requires an MMU and toolchain with WCHAR and thread support" + depends on !BR2_USE_MMU || !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS
Signature · 1 line
1.8.1.2
PATCH 40/67 opencv: libglib2 requires threads
In reply to Spenser GillilandSigned-off-by Spenser Gilliland <[email protected]>
--- package/opencv/Config.in | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-)
package/opencv/Config.in +7 -3
@@ -139,16 +139,20 @@ comment "ffmpeg support requires a toolchain with LARGEFILE and IPV6 support" config BR2_PACKAGE_OPENCV_WITH_GSTREAMER bool "gstreamer support" - depends on BR2_USE_WCHAR - depends on BR2_TOOLCHAIN_HAS_THREADS + depends on BR2_USE_WCHAR # gstreamer -> libglib2 + depends on BR2_TOOLCHAIN_HAS_THREADS # gstreamer -> libglib2 select BR2_PACKAGE_GSTREAMER select BR2_PACKAGE_GST_PLUGINS_BASE select BR2_PACKAGE_GST_PLUGINS_BASE_PLUGIN_APP +comment "gstreamer support requires a toolchain with WCHAR and threading support" + depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS + config BR2_PACKAGE_OPENCV_WITH_GTK bool "gtk support" depends on BR2_PACKAGE_XORG7||BR2_PACKAGE_DIRECTFB - depends on BR2_USE_WCHAR + depends on BR2_USE_WCHAR # libgtk2 -> libglib2 + depends on BR2_TOOLCHAIN_HAS_THREADS # libgtk2 -> libglib2 depends on BR2_INSTALL_LIBSTDCPP select BR2_PACKAGE_LIBGTK2
Signature · 1 line
1.8.1.2
PATCH 41/67 openobex: libglib2 requires threads
In reply to Spenser GillilandSigned-off-by Spenser Gilliland <[email protected]>
--- package/openobex/Config.in | 20 +++++++++++--------- 1 file changed, 11 insertions(+), 9 deletions(-)
package/openobex/Config.in +11 -9
@@ -1,6 +1,3 @@ -comment "openobex requires a toolchain with IPV6 support" - depends on !BR2_INET_IPV6 - config BR2_PACKAGE_OPENOBEX bool "openobex" depends on BR2_INET_IPV6
@@ -12,25 +9,25 @@ config BR2_PACKAGE_OPENOBEX if BR2_PACKAGE_OPENOBEX -comment "bluez support require a toolchain with WCHAR and thread support" - depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS - config BR2_PACKAGE_OPENOBEX_BLUEZ bool "enable bluez support" depends on !BR2_avr32 depends on BR2_USE_WCHAR # libglib2 - depends on BR2_TOOLCHAIN_HAS_THREADS # dbus, alsa-lib + depends on BR2_TOOLCHAIN_HAS_THREADS # dbus, alsa-lib, libglib2 depends on BR2_USE_MMU # dbus select BR2_PACKAGE_BLUEZ_UTILS -comment "libusb support require a toolchain with thread support" - depends on !BR2_TOOLCHAIN_HAS_THREADS +comment "bluez support require a toolchain with WCHAR and thread support" + depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS config BR2_PACKAGE_OPENOBEX_LIBUSB bool "enable libusb support" depends on BR2_TOOLCHAIN_HAS_THREADS select BR2_PACKAGE_LIBUSB +comment "libusb support require a toolchain with thread support" + depends on !BR2_TOOLCHAIN_HAS_THREADS + config BR2_PACKAGE_OPENOBEX_APPS bool "install test applications" help
@@ -43,3 +40,8 @@ config BR2_PACKAGE_OPENOBEX_DUMP bool "enable protocol dumping for debugging" endif + +comment "openobex requires a toolchain with IPV6 support" + depends on !BR2_INET_IPV6 + +
Signature · 1 line
1.8.1.2
PATCH 42/67 pango: libglib2 requires threads
In reply to Spenser GillilandSigned-off-by Spenser Gilliland <[email protected]>
--- package/pango/Config.in | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
package/pango/Config.in +4 -2
@@ -1,6 +1,7 @@ config BR2_PACKAGE_PANGO bool "pango" depends on BR2_USE_WCHAR # glib2 + depends on BR2_TOOLCHAIN_HAS_THREADS # glib2 depends on BR2_INSTALL_LIBSTDCPP # freetype support select BR2_PACKAGE_LIBGLIB2 select BR2_PACKAGE_EXPAT
@@ -18,5 +19,6 @@ config BR2_PACKAGE_PANGO http://www.pango.org/ -comment "pango requires a toolchain with WCHAR and C++ support" - depends on !BR2_USE_WCHAR || !BR2_INSTALL_LIBSTDCPP +comment "pango requires a toolchain with WCHAR, threading and C++ support" + depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS || \ + !BR2_INSTALL_LIBSTDCPP
Signature · 1 line
1.8.1.2
PATCH 43/67 pcmanfm: libglib2 requires threads
In reply to Spenser GillilandSigned-off-by Spenser Gilliland <[email protected]>
--- package/pcmanfm/Config.in | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
package/pcmanfm/Config.in +4 -2
@@ -2,6 +2,7 @@ config BR2_PACKAGE_PCMANFM bool "pcmanfm" depends on BR2_PACKAGE_XORG7 depends on BR2_USE_WCHAR # glib2 + depends on BR2_TOOLCHAIN_HAS_THREADS # glib2 select BR2_PACKAGE_GAMIN select BR2_PACKAGE_STARTUP_NOTIFICATION select BR2_PACKAGE_XLIB_LIBX11
@@ -12,5 +13,6 @@ config BR2_PACKAGE_PCMANFM http://internap.dl.sourceforge.net/sourceforge/pcmanfm -comment "pcmanfm requires a toolchain with WCHAR support" - depends on BR2_PACKAGE_XORG7 && !BR2_USE_WCHAR +comment "pcmanfm requires a toolchain with WCHAR and threading support" + depends on BR2_PACKAGE_XORG7 && \ + (!BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS)
Signature · 1 line
1.8.1.2
PATCH 44/67 pkg-config: libglib2 requires threads
In reply to Spenser GillilandSigned-off-by Spenser Gilliland <[email protected]>
--- package/pkg-config/Config.in | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
package/pkg-config/Config.in +3 -2
@@ -1,6 +1,7 @@ config BR2_PACKAGE_PKG_CONFIG bool "pkg-config" depends on BR2_USE_WCHAR # glib2 + depends on BR2_TOOLCHAIN_HAS_THREADS # glib2 depends on BR2_DEPRECATED select BR2_PACKAGE_LIBGLIB2 help
@@ -11,5 +12,5 @@ config BR2_PACKAGE_PKG_CONFIG http://www.freedesktop.org/software/pkgconfig/ -comment "pkg-config requires a toolchain with WCHAR support" - depends on BR2_DEPRECATED && !BR2_USE_WCHAR +comment "pkg-config requires a toolchain with WCHAR and threading support" + depends on BR2_DEPRECATED && (!BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS)
Signature · 1 line
1.8.1.2
PATCH 45/67 polkit: libglib2 requires threads
In reply to Spenser GillilandSigned-off-by Spenser Gilliland <[email protected]>
--- package/polkit/Config.in | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
package/polkit/Config.in +3 -2
@@ -1,6 +1,7 @@ config BR2_PACKAGE_POLKIT bool "polkit" depends on BR2_USE_WCHAR # libglib2 + depends on BR2_TOOLCHAIN_HAS_THREADS # libglib2 select BR2_PACKAGE_LIBGLIB2 select BR2_PACKAGE_EXPAT help
@@ -10,5 +11,5 @@ config BR2_PACKAGE_POLKIT http://www.freedesktop.org/wiki/Software/polkit -comment "polkit requires a toolchain with WCHAR support" - depends on !BR2_USE_WCHAR +comment "polkit requires a toolchain with WCHAR and threading support" + depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS
Signature · 1 line
1.8.1.2
PATCH 46/67 sconeserver: libglib2 requires threads
In reply to Spenser GillilandSigned-off-by Spenser Gilliland <[email protected]>
--- package/sconeserver/Config.in | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
package/sconeserver/Config.in +1 -1
@@ -42,7 +42,7 @@ config BR2_PACKAGE_SCONESERVER_BLUETOOTH bool "bluetooth" depends on BR2_USE_WCHAR # bluez->libglib2 depends on BR2_USE_MMU # bluez->dbus - depends on BR2_TOOLCHAIN_HAS_THREADS # bluez->dbus + depends on BR2_TOOLCHAIN_HAS_THREADS # bluez->dbus, bluez->libglib2 depends on !BR2_avr32 # bluez_utils select BR2_PACKAGE_BLUEZ_UTILS help
Signature · 1 line
1.8.1.2
PATCH 47/67 shared-mime-info: libglib2 requires threads
In reply to Spenser GillilandSigned-off-by Spenser Gilliland <[email protected]>
--- package/shared-mime-info/Config.in | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
package/shared-mime-info/Config.in +3 -2
@@ -1,6 +1,7 @@ config BR2_PACKAGE_SHARED_MIME_INFO bool "shared-mime-info" depends on BR2_USE_WCHAR # glib2 + depends on BR2_TOOLCHAIN_HAS_THREADS # glib2 select BR2_PACKAGE_LIBGLIB2 select BR2_PACKAGE_LIBXML2 help
@@ -10,5 +11,5 @@ config BR2_PACKAGE_SHARED_MIME_INFO http://freedesktop.org/wiki/Software/shared-mime-info -comment "shared-mime-info requires a toolchain with WCHAR support" - depends on !BR2_USE_WCHAR +comment "shared-mime-info requires a toolchain with WCHAR and threading support" + depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS
Signature · 1 line
1.8.1.2
PATCH 48/67 snowball-init: libglib2 requires threads
In reply to Spenser GillilandSigned-off-by Spenser Gilliland <[email protected]>
--- package/snowball-init/Config.in | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
package/snowball-init/Config.in +4 -1
@@ -4,7 +4,7 @@ config BR2_PACKAGE_SNOWBALL_INIT select BR2_PACKAGE_BLUEZ_UTILS depends on !BR2_avr32 depends on BR2_USE_WCHAR # libglib2 - depends on BR2_TOOLCHAIN_HAS_THREADS # dbus, alsa-lib + depends on BR2_TOOLCHAIN_HAS_THREADS # dbus, alsa-lib, libglib2 depends on BR2_USE_MMU # dbus select BR2_PACKAGE_UX500_FIRMWARE help
@@ -12,3 +12,6 @@ config BR2_PACKAGE_SNOWBALL_INIT http://www.igloocommunity.org +comment "snowball-init requires a toolchain with WCHAR, threading, and MMU support" + depends on !BR2_avr32 && \ + (!BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS || !BR2_USE_MMU)
Signature · 1 line
1.8.1.2
PATCH 49/67 sshfs: libglib2 requires threads
In reply to Spenser GillilandSigned-off-by Spenser Gilliland <[email protected]>
--- package/sshfs/Config.in | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
package/sshfs/Config.in +1 -1
@@ -7,7 +7,7 @@ config BR2_PACKAGE_SSHFS select BR2_PACKAGE_OPENSSH depends on BR2_LARGEFILE depends on BR2_USE_WCHAR # glib2 - depends on BR2_TOOLCHAIN_HAS_THREADS # libfuse + depends on BR2_TOOLCHAIN_HAS_THREADS # libfuse, glib2 depends on BR2_USE_MMU # libfuse depends on !BR2_PREFER_STATIC_LIB # libfuse help
Signature · 1 line
1.8.1.2
PATCH 50/67 sysprof: libglib2 requires threads
In reply to Spenser Gillilandminor cleanups as well
Signed-off-by Spenser Gilliland <[email protected]>
--- package/sysprof/Config.in | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-)
package/sysprof/Config.in +7 -3
@@ -2,6 +2,7 @@ config BR2_PACKAGE_SYSPROF bool "sysprof" select BR2_PACKAGE_LIBGLIB2 depends on BR2_USE_WCHAR # glib2 + depends on BR2_TOOLCHAIN_HAS_THREADS # glib2 # In its util.h file, sysprof contains architecture-specific # code depends on BR2_i386 || BR2_x86_64 || BR2_powerpc || BR2_sh4a || BR2_sh4aeb
@@ -11,14 +12,17 @@ config BR2_PACKAGE_SYSPROF http://sysprof.com +if BR2_PACKAGE_SYSPROF + config BR2_PACKAGE_SYSPROF_GUI bool "sysprof GUI" - depends on BR2_PACKAGE_SYSPROF depends on BR2_PACKAGE_LIBGTK2 select BR2_PACKAGE_LIBGLADE select BR2_PACKAGE_GDK_PIXBUF help GUI for the sysprof system-wide statistical profiler. -comment "sysprof requires a toolchain with WCHAR support" - depends on !BR2_USE_WCHAR +endif + +comment "sysprof requires a toolchain with WCHAR and threading support" + depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS
Signature · 1 line
1.8.1.2
PATCH 51/67 udev: libglib2 requires threads
In reply to Spenser GillilandSigned-off-by Spenser Gilliland <[email protected]>
--- package/udev/Config.in | 5 +++++ 1 file changed, 5 insertions(+)
package/udev/Config.in +5 -0
@@ -25,10 +25,15 @@ config BR2_PACKAGE_UDEV_ALL_EXTRAS select BR2_PACKAGE_ACL select BR2_PACKAGE_HWDATA select BR2_PACKAGE_LIBGLIB2 + depends on BR2_USE_WCHAR # libglib2 + depends on BR2_TOOLCHAIN_HAS_THREADS # libglib2 help Enable all extras with external dependencies like libacl, hwdata and libglib2 +comment "enabling all extras requires a toolchain with WCHAR and threading support" + depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_USE_THREADS + endif comment "udev requires /dev mgmnt set to udev under System configuration"
Signature · 1 line
1.8.1.2
PATCH 52/67 udisks: libglib2 requires threads
In reply to Spenser Gillilandminor cleanups
Signed-off-by Spenser Gilliland <[email protected]>
--- package/udisks/Config.in | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-)
package/udisks/Config.in +9 -4
@@ -1,12 +1,13 @@ config BR2_PACKAGE_UDISKS bool "udisks" depends on BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_UDEV - depends on BR2_TOOLCHAIN_HAS_THREADS + depends on BR2_TOOLCHAIN_HAS_THREADS # dbus-glib -> glib2 depends on BR2_USE_MMU # lvm2 select BR2_PACKAGE_UDEV select BR2_PACKAGE_UDEV_ALL_EXTRAS select BR2_PACKAGE_DBUS select BR2_PACKAGE_DBUS_GLIB + depends on BR2_USE_WCHAR # dbus-glib -> glib2 select BR2_PACKAGE_SG3_UTILS select BR2_PACKAGE_POLKIT select BR2_PACKAGE_PARTED
@@ -24,12 +25,16 @@ config BR2_PACKAGE_UDISKS http://www.freedesktop.org/wiki/Software/udisks +if BR2_PACKAGE_UDISKS + config BR2_PACKAGE_UDISKS_LVM2 bool "lvm2 support" - depends on BR2_PACKAGE_UDISKS select BR2_PACKAGE_LVM2_APP_LIBRARY help Enable LVM2 support -comment "udisks requires /dev mgmnt set to udev under System configuration" - depends on !BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_UDEV +endif + +comment "udisks requires /dev mgmnt set to udev under System configuration and a toolchain with WCHAR and threading support" + depends on !BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_UDEV || \ + !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS
Signature · 1 line
1.8.1.2
PATCH 53/67 ussp-push: libglib2 requires threads
In reply to Spenser GillilandSigned-off-by Spenser Gilliland <[email protected]>
--- package/ussp-push/Config.in | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
package/ussp-push/Config.in +1 -1
@@ -3,7 +3,7 @@ config BR2_PACKAGE_USSP_PUSH depends on BR2_INET_IPV6 depends on !BR2_avr32 depends on BR2_USE_WCHAR # libglib2 - depends on BR2_TOOLCHAIN_HAS_THREADS # dbus, alsa-lib + depends on BR2_TOOLCHAIN_HAS_THREADS # dbus, alsa-lib, libglib2 depends on BR2_USE_MMU # dbus select BR2_PACKAGE_OPENOBEX select BR2_PACKAGE_OPENOBEX_BLUEZ
Signature · 1 line
1.8.1.2
PATCH 54/67 vala: libglib2 requires threads
In reply to Spenser GillilandSigned-off-by Spenser Gilliland <[email protected]>
--- package/vala/Config.in | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
package/vala/Config.in +3 -2
@@ -3,6 +3,7 @@ config BR2_PACKAGE_VALA # We no longer support a toolchain on the target depends on BR2_DEPRECATED depends on BR2_USE_WCHAR # glib2 + depends on BR2_TOOLCHAIN_HAS_THREADS # glib2 select BR2_PACKAGE_LIBGLIB2 select BR2_PACKAGE_GETTEXT if BR2_NEEDS_GETTEXT_IF_LOCALE select BR2_PACKAGE_LIBICONV if !BR2_ENABLE_LOCALE
@@ -11,5 +12,5 @@ config BR2_PACKAGE_VALA http://live.gnome.org/Vala -comment "vala requires a toolchain with WCHAR support" - depends on !BR2_USE_WCHAR +comment "vala requires a toolchain with WCHAR and threading support" + depends on BR2_DEPRECATED && (!BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS)
Signature · 1 line
1.8.1.2
PATCH 55/67 webkit: libglib2 requires threads
In reply to Spenser GillilandSigned-off-by Spenser Gilliland <[email protected]>
--- package/webkit/Config.in | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-)
package/webkit/Config.in +5 -3
@@ -1,7 +1,8 @@ config BR2_PACKAGE_WEBKIT bool "webkit" depends on BR2_INSTALL_LIBSTDCPP - depends on BR2_USE_WCHAR + depends on BR2_USE_WCHAR # enchant -> libglib2 + depends on BR2_TOOLCHAIN_HAS_THREADS # enchant -> libglib2 depends on BR2_PACKAGE_LIBGTK2 select BR2_PACKAGE_ICU select BR2_PACKAGE_LIBCURL
@@ -22,5 +23,6 @@ config BR2_PACKAGE_WEBKIT http://webkit.org/ -comment "webkit requires C++, WCHAR in toolchain and libgtk2" - depends on !BR2_INSTALL_LIBSTDCPP || !BR2_USE_WCHAR || !BR2_PACKAGE_LIBGTK2 +comment "webkit requires libgtk2 and a toolchain with C++, WCHAR, threading support" + depends on BR2_PACKAGE_LIBGTK2 || !BR2_INSTALL_LIBSTDCPP || \ + !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS
Signature · 1 line
1.8.1.2
PATCH 56/67 wireshark: libglib2 requires threads
In reply to Spenser GillilandSigned-off-by Spenser Gilliland <[email protected]>
--- package/wireshark/Config.in | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
package/wireshark/Config.in +3 -2
@@ -5,11 +5,12 @@ config BR2_PACKAGE_WIRESHARK select BR2_PACKAGE_LIBGLIB2 depends on BR2_USE_MMU # fork() depends on BR2_USE_WCHAR # glib2 + depends on BR2_TOOLCHAIN_HAS_THREADS # glib2 help Network traffic sniffer and protocol decoder. Currently only tshark, the console interface, is enabled. http://www.wireshark.org -comment "wireshark requires a toolchain with WCHAR support" - depends on !BR2_USE_WCHAR +comment "wireshark requires a MMU and a toolchain with WCHAR and threading support" + depends on !BR2_USE_MMU || !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS
Signature · 1 line
1.8.1.2
PATCH 57/67 gst-plugin-x170: libglib2 requires threads
In reply to Spenser GillilandSigned-off-by Spenser Gilliland <[email protected]>
--- package/multimedia/gst-plugin-x170/Config.in | 4 ++++ 1 file changed, 4 insertions(+)
package/multimedia/gst-plugin-x170/Config.in +4 -0
@@ -2,6 +2,7 @@ config BR2_PACKAGE_GST_PLUGIN_X170 bool "gst-plugin-x170" depends on BR2_PACKAGE_GSTREAMER depends on BR2_arm926t + # glibc toolchain includes WCHAR and threading for libglib2 depends on BR2_TOOLCHAIN_USES_GLIBC # on2-8170-libs select BR2_PACKAGE_ON2_8170_LIBS help
@@ -9,3 +10,6 @@ config BR2_PACKAGE_GST_PLUGIN_X170 ATMEL AT91SAM9M10 SoC. http://www.at91.com/linux4sam/bin/view/Linux4SAM/SAM9M10Gstreamer + +comment "gst-plugin-x170 requires a toolchain which uses eglibc/glibc" + depends on BR2_PACKAGE_GSTREAMER && BR2_arm926t && !BR2_TOOLCHAIN_USES_GLIBC
Signature · 1 line
1.8.1.2
PATCH 58/67 gst-plugins-bad: libglib2 requires threads
In reply to Spenser GillilandSigned-off-by Spenser Gilliland <[email protected]>
--- package/multimedia/gst-plugins-bad/Config.in | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-)
package/multimedia/gst-plugins-bad/Config.in +10 -2
@@ -277,8 +277,13 @@ config BR2_PACKAGE_GST_PLUGINS_BAD_PLUGIN_FAAD config BR2_PACKAGE_GST_PLUGINS_BAD_PLUGIN_LIBMMS bool "libmms" + depends on BR2_USE_WCHAR # libmms -> libglib2 + depends on BR2_TOOLCHAIN_HAS_THREADS # libmms -> libglib2 select BR2_PACKAGE_LIBMMS +comment "libmms requires a toolchain with WCHAR and threading support" + depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS + config BR2_PACKAGE_GST_PLUGINS_BAD_PLUGIN_MUSEPACK bool "musepack" select BR2_PACKAGE_MUSEPACK
@@ -294,10 +299,13 @@ config BR2_PACKAGE_GST_PLUGINS_BAD_PLUGIN_OPUS config BR2_PACKAGE_GST_PLUGINS_BAD_PLUGIN_RSVG bool "rsvg" depends on BR2_INSTALL_LIBSTDCPP + depends on BR2_USE_WCHAR # librsvg -> libglib2 + depends on BR2_TOOLCHAIN_HAS_THREADS # librsvg -> libglib2 select BR2_PACKAGE_LIBRSVG -comment "rsvg plugin requires a toolchain with C++ support" - depends on !BR2_INSTALL_LIBSTDCPP +comment "rsvg plugin requires a toolchain with C++, WCHAR, and threading support" + depends on !BR2_INSTALL_LIBSTDCPP || !BR2_USE_WCHAR || \ + !BR2_TOOLCHAIN_HAS_THREADS config BR2_PACKAGE_GST_PLUGINS_BAD_PLUGIN_SDL bool "sdl"
Signature · 1 line
1.8.1.2
PATCH 59/67 gst-plugins-base: libglib2 requires threads
In reply to Spenser GillilandSigned-off-by Spenser Gilliland <[email protected]>
--- package/multimedia/gst-plugins-base/Config.in | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)
package/multimedia/gst-plugins-base/Config.in +5 -2
@@ -86,10 +86,13 @@ config BR2_PACKAGE_GST_PLUGINS_BASE_PLUGIN_OGG config BR2_PACKAGE_GST_PLUGINS_BASE_PLUGIN_PANGO bool "pango font renderer" depends on BR2_INSTALL_LIBSTDCPP + depends on BR2_USE_WCHAR # pango -> libglib2 + depends on BR2_TOOLCHAIN_HAS_THREADS # pango -> libglib2 select BR2_PACKAGE_PANGO -comment "pango plugin requires a toolchain with C++ support" - depends on !BR2_INSTALL_LIBSTDCPP +comment "pango plugin requires a toolchain with C++, WCHAR and threading support " + depends on !BR2_INSTALL_LIBSTDCPP || !BR2_USE_WCHAR || \ + !BR2_TOOLCHAIN_HAS_THREADS config BR2_PACKAGE_GST_PLUGINS_BASE_PLUGIN_THEORA bool "theora (*.ogg video)"
Signature · 1 line
1.8.1.2
PATCH 60/67 gst-plugins-good: libglib2 requires threads
In reply to Spenser GillilandSigned-off-by Spenser Gilliland <[email protected]>
--- package/multimedia/gst-plugins-good/Config.in | 10 ++++++++++ 1 file changed, 10 insertions(+)
package/multimedia/gst-plugins-good/Config.in +10 -0
@@ -188,8 +188,13 @@ config BR2_PACKAGE_GST_PLUGINS_GOOD_PLUGIN_FLAC config BR2_PACKAGE_GST_PLUGINS_GOOD_PLUGIN_GDKPIXBUF bool "gdkpixbuf" + depends on BR2_USE_WCHAR # gdk-pixbuf -> libglib2 + depends on BR2_TOOLCHAIN_HAS_THREADS # gdk-pixbuf -> libglib2 select BR2_PACKAGE_GDK_PIXBUF +comment "gdkpixbuf requires a toolchain with WCHAR and threading support" + depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS + config BR2_PACKAGE_GST_PLUGINS_GOOD_PLUGIN_OSS bool "ossaudio (OSS audio)"
@@ -204,8 +209,13 @@ config BR2_PACKAGE_GST_PLUGINS_GOOD_PLUGIN_PULSE config BR2_PACKAGE_GST_PLUGINS_GOOD_PLUGIN_SOUPHTTPSRC bool "souphttpsrc (http client)" + depends on BR2_USE_WCHAR # libsoup -> glib2 + depends on BR2_TOOLCHAIN_HAS_THREADS # libsoup -> glib2 select BR2_PACKAGE_LIBSOUP +comment "souphttsrc requires a toolchain with WCHAR and threading support" + depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREAD + config BR2_PACKAGE_GST_PLUGINS_GOOD_PLUGIN_SPEEX bool "speex" select BR2_PACKAGE_SPEEX
Signature · 1 line
1.8.1.2
PATCH 61/67 gst1-plugins-good: libglib2 requires threads
In reply to Spenser GillilandSigned-off-by Spenser Gilliland <[email protected]>
--- package/multimedia/gst1-plugins-good/Config.in | 10 ++++++++++ 1 file changed, 10 insertions(+)
package/multimedia/gst1-plugins-good/Config.in +10 -0
@@ -288,9 +288,14 @@ config BR2_PACKAGE_GST1_PLUGINS_GOOD_PLUGIN_FLAC config BR2_PACKAGE_GST1_PLUGINS_GOOD_PLUGIN_GDKPIXBUF bool "gdkpixbuf" select BR2_PACKAGE_GDK_PIXBUF + depends on BR2_USE_WCHAR # gdk-pixbuf -> libglib2 + depends on BR2_TOOLCHAIN_HAS_THREADS # gdk-pixbuf -> libglib2 help GdkPixbuf-based image decoder, overlay and sink +comment "gdkpixbuf requires a toolchain with WCHAR and threading support" + depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS + config BR2_PACKAGE_GST1_PLUGINS_GOOD_PLUGIN_PULSE depends on BR2_TOOLCHAIN_HAS_THREADS # pulseaudio depends on BR2_LARGEFILE # pulseaudio -> libsndfile
@@ -301,10 +306,15 @@ config BR2_PACKAGE_GST1_PLUGINS_GOOD_PLUGIN_PULSE config BR2_PACKAGE_GST1_PLUGINS_GOOD_PLUGIN_SOUPHTTPSRC bool "souphttpsrc (http client)" + depends on BR2_USE_WCHAR # libsoup -> glib2 + depends on BR2_TOOLCHAIN_HAS_THREADS # libsoup -> glib2 select BR2_PACKAGE_LIBSOUP help libsoup HTTP client src/sink +comment "souphttpsrc requires a toolchain with WCHAR and threading support" + depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS + config BR2_PACKAGE_GST1_PLUGINS_GOOD_PLUGIN_SPEEX bool "speex" select BR2_PACKAGE_SPEEX
Signature · 1 line
1.8.1.2
PATCH 62/67 gst1-plugins-base: libglib2 requires threads
In reply to Spenser GillilandSigned-off-by Spenser Gilliland <[email protected]>
--- package/multimedia/gst1-plugins-base/Config.in | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)
package/multimedia/gst1-plugins-base/Config.in +5 -2
@@ -130,12 +130,15 @@ config BR2_PACKAGE_GST1_PLUGINS_BASE_PLUGIN_OGG config BR2_PACKAGE_GST1_PLUGINS_BASE_PLUGIN_PANGO bool "pango font renderer" depends on BR2_INSTALL_LIBSTDCPP + depends on BR2_USE_WCHAR # pango -> libglib2 + depends on BR2_TOOLCHAIN_HAS_THREADS # pango -> libglib2 select BR2_PACKAGE_PANGO help Pango-based text rendering and overlay -comment "pango plugin requires a toolchain with C++ support" - depends on !BR2_INSTALL_LIBSTDCPP +comment "pango plugin requires a toolchain with C++, WCHAR and threading support" + depends on !BR2_INSTALL_LIBSTDCPP || !BR2_USE_WCHAR || \ + !BR2_TOOLCHAIN_HAS_THREADS config BR2_PACKAGE_GST1_PLUGINS_BASE_PLUGIN_THEORA bool "theora (*.ogg video)"
Signature · 1 line
1.8.1.2
PATCH 63/67 gst1-plugins-bad: libglib2 requires threads
In reply to Spenser GillilandSigned-off-by Spenser Gilliland <[email protected]>
--- package/multimedia/gst1-plugins-bad/Config.in | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-)
package/multimedia/gst1-plugins-bad/Config.in +10 -2
@@ -372,10 +372,15 @@ config BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_FBDEV config BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_LIBMMS bool "libmms" + depends on BR2_USE_WCHAR # libmms -> libglib2 + depends on BR2_TOOLCHAIN_HAS_THREADS # libmms -> libglib2 select BR2_PACKAGE_LIBMMS help Microsoft Multi Media Server streaming protocol support +comment "libmms requires a toolchain with WCHAR and threading support" + depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREAD + config BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_MPEG2ENC bool "mpeg2enc" select BR2_PACKAGE_LIBMPEG2
@@ -417,12 +422,15 @@ config BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_OPUS config BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_RSVG bool "rsvg" depends on BR2_INSTALL_LIBSTDCPP + depends on BR2_USE_WCHAR # librsvg -> glib2 + depends on BR2_TOOLCHAIN_HAS_THREADS # librsvg -> glib2 select BR2_PACKAGE_LIBRSVG help RSVG plugin library -comment "rsvg plugin requires a toolchain with C++ support" - depends on !BR2_INSTALL_LIBSTDCPP +comment "rsvg plugin requires a toolchain with C++, WCHAR and threading support" + depends on !BR2_INSTALL_LIBSTDCPP || !BR2_USE_WCHAR || \ + !BR2_TOOLCHAIN_HAS_THREADS config BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_EGLGLES bool "eglgles"
Signature · 1 line
1.8.1.2
PATCH 64/67 gstreamer: libglib2 requires threads
In reply to Spenser GillilandSigned-off-by Spenser Gilliland <[email protected]>
--- package/multimedia/gstreamer/Config.in | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
package/multimedia/gstreamer/Config.in +1 -1
@@ -1,7 +1,7 @@ config BR2_PACKAGE_GSTREAMER bool "gstreamer" depends on BR2_USE_WCHAR # glib2 - depends on BR2_TOOLCHAIN_HAS_THREADS + depends on BR2_TOOLCHAIN_HAS_THREADS # glib2 select BR2_PACKAGE_LIBGLIB2 help GStreamer is an open source multimedia framework.
Signature · 1 line
1.8.1.2
PATCH 65/67 gstreamer1: libglib2 requires threads
In reply to Spenser GillilandSigned-off-by Spenser Gilliland <[email protected]>
--- package/multimedia/gstreamer1/Config.in | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
package/multimedia/gstreamer1/Config.in +2 -2
@@ -1,7 +1,7 @@ config BR2_PACKAGE_GSTREAMER1 bool "gstreamer1" depends on BR2_USE_WCHAR # glib2 - depends on BR2_TOOLCHAIN_HAS_THREADS + depends on BR2_TOOLCHAIN_HAS_THREADS # glib2 select BR2_PACKAGE_LIBGLIB2 help GStreamer is an open source multimedia framework. This 1.x version of
@@ -49,5 +49,5 @@ config BR2_PACKAGE_GSTREAMER1_INSTALL_TOOLS endif -comment "gstreamer1 requires a toolchain with WCHAR and threads support" +comment "gstreamer1 requires a toolchain with WCHAR and threading support" depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS
Signature · 1 line
1.8.1.2
PATCH 66/67 mpd: libglib2 requires threads
In reply to Spenser GillilandSigned-off-by Spenser Gilliland <[email protected]>
--- package/multimedia/mpd/Config.in | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-)
package/multimedia/mpd/Config.in +5 -3
@@ -1,7 +1,8 @@ menuconfig BR2_PACKAGE_MPD bool "mpd" depends on BR2_INSTALL_LIBSTDCPP - depends on BR2_USE_WCHAR + depends on BR2_USE_WCHAR # libglib2 + depends on BR2_TOOLCHAIN_HAS_THREADS # libglib2 select BR2_PACKAGE_LIBGLIB2 select BR2_PACKAGE_LIBICONV if !BR2_ENABLE_LOCALE select BR2_PACKAGE_MPD_TREMOR if !(BR2_PACKAGE_MPD_MAD || BR2_PACKAGE_MPD_MPG123 || BR2_PACKAGE_MPD_VORBIS || BR2_PACKAGE_MPD_WAVPACK || BR2_PACKAGE_MPD_FLAC || BR2_PACKAGE_MPD_MUSEPACK || BR2_PACKAGE_MPD_FFMPEG)
@@ -181,5 +182,6 @@ config BR2_PACKAGE_MPD_WAVPACK endif -comment "mpd requires a toolchain with C++ and WCHAR support" - depends on !BR2_INSTALL_LIBSTDCPP || !BR2_USE_WCHAR +comment "mpd requires a toolchain with C++, threading and WCHAR support" + depends on !BR2_INSTALL_LIBSTDCPP || !BR2_USE_WCHAR || \ + !BR2_TOOLCHAIN_HAS_THREADS
Signature · 1 line
1.8.1.2
PATCH 67/67 libglib2: needs threads
In reply to Spenser GillilandSigned-off-by Spenser Gilliland <[email protected]>
--- package/libglib2/Config.in | 5 ++-- ...ib2-0002-fix-build-when-no-thread-support.patch | 30 ---------------------- 2 files changed, 3 insertions(+), 32 deletions(-) delete mode 100644 package/libglib2/libglib2-0002-fix-build-when-no-thread-support.patch
package/libglib2/Config.in +3 -2
@@ -5,10 +5,11 @@ config BR2_PACKAGE_LIBGLIB2 select BR2_PACKAGE_LIBFFI select BR2_PACKAGE_ZLIB depends on BR2_USE_WCHAR # gettext + depends on BR2_TOOLCHAIN_HAS_THREADS help Low-level core library that forms the basis of GTK+ and GNOME. http://www.gtk.org/ -comment "libglib2 requires a toolchain with WCHAR support" - depends on !BR2_USE_WCHAR +comment "libglib2 requires a toolchain with WCHAR support and threading support" + depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS
package/libglib2/libglib2-0002-fix-build-when-no-thread-support.patch deleted +0 -30
@@ -1,30 +0,0 @@ -Fix gio/gcancellable.c build when thread support is disabled - -Changes: - Updated for 2.36.1 - -Signed-off-by: "Samuel Martin" <[email protected]> -Signed-off-by: "Spenser Gilliland" <[email protected]> ---- ---- libglib2-2.36.1.orig/gio/gcancellable.c 2013-03-13 08:39:09.000000000 -0500 -+++ libglib2-2.36.1/gio/gcancellable.c 2013-05-26 10:49:32.366019891 -0500 -@@ -267,7 +267,9 @@ - while (priv->cancelled_running) - { - priv->cancelled_running_waiting = TRUE; -+#if defined(G_THREADS_ENABLED) - g_cond_wait (&cancellable_cond, &cancellable_mutex); -+#endif - } - - if (priv->cancelled) -@@ -620,7 +622,9 @@ - while (priv->cancelled_running) - { - priv->cancelled_running_waiting = TRUE; -+#if defined(G_THREADS_ENABLED) - g_cond_wait (&cancellable_cond, &cancellable_mutex); -+#endif - } - - g_signal_handler_disconnect (cancellable, handler_id);
Signature · 1 line
1.8.1.2
cover libglib2 requires threads
In reply to Spenser GillilandDear Spenser Gilliland,
Quoted 8 lines · Spenser Gilliland
This patch removes support for an un-threaded version of libglib2. There were minor cleanups and some bug fixes to various Config.in as well.
See autobuilder failures
http://autobuild.buildroot.net/results/d1fb882fe4d22a17bdd438360da515011dda2b30/build-end.log?
http://autobuild.buildroot.net/results/b66e807769ead5caa3e3b6312e9f7c35c14eafe7/build-end.log?
http://autobuild.buildroot.net/results/9c3fa0c5003a6369e70bfe6d611f7d745742a8c7/build-end.log?
I've committed this patch set, after squashing all the patches (except the avahi minor cleanup patch) into one and doing a few minor fixes.
Thanks!
Thomas
Signature · 4 lines
Thomas Petazzoni, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com