3.0.88-stable review

This is the start of the stable review cycle for the 3.0.88 release. There are 45 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Sun Jul 28 20:54:53 UTC 2013. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	kernel.org/pub/linux/kernel/v3.0/stable-review/patch-3.0.88-rc1.gz

and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <[email protected]>

    Linux 3.0.88-rc1

Eldad Zack <[email protected]>
ALSA: usb-audio: 6fire: return correct XRUN indication

Steffen Maier <[email protected]>
zfcp: status read buffers on first adapter open with link down

Thomas Gleixner <[email protected]>
hrtimers: Move SMP function call to thread context

zhangwei(Jovi) <[email protected]>
tracing: Fix irqs-off tag display in syscall tracing

David Jeffery <[email protected]>
lockd: protect nlm_blocked access in nlmsvc_retry_blocked

Barry Grussling <[email protected]>

    usb: cp210x support SEL C662 Vendor/Device

Sami Rahman <[email protected]>

    USB: cp210x: add MMB and PI ZigBee USB Device Support

Luiz Angelo Daros de Luca <[email protected]>

    usb: serial: cp210x: Add USB ID for Netgear Switches embedded serial adapter

Enrico Mioso <[email protected]>
usb: serial: option: Add ONYX 3G device support

Alexandr \\\"Sky\\\" Ivanov <[email protected]>

    USB: option: add D-Link DWM-152/C1 and DWM-156/C1

Daniil Bolsun <[email protected]>
USB: option: append Petatel NP10T device to GSM modems list

Enrico Mioso <[email protected]>
usb: serial: option.c: remove ONDA MT825UP product ID fromdriver

Dan Williams <[email protected]>
usb: serial: option: add Olivetti Olicard 200

Bjørn Mork <[email protected]>
usb: option: add TP-LINK MA260

Enrico Mioso <[email protected]>
usb: serial: option: blacklist ONDA MT689DC QMI interface

Andi Kleen <[email protected]>
SCSI: Fix incorrect memset in bnx2fc_parse_fcp_rsp

Bjørn Mork <[email protected]>
SCSI: megaraid_sas: fix memory leak if SGL has zero length entries

Jan Kara <[email protected]>
writeback: Fix periodic writeback after fs mount

Eric Dumazet <[email protected]>
vlan: fix a race in egress prio management

dingtianhong <[email protected]>
ifb: fix oops when loading the ifb failed

dingtianhong <[email protected]>
dummy: fix oops when loading the dummy failed

dingtianhong <[email protected]>
ifb: fix rcu_sched self-detected stalls

Dave Kleikamp <[email protected]>
sunvnet: vnet_port_remove must call unregister_netdev

Hannes Frederic Sowa <[email protected]>
ipv6: call udp_push_pending_frames when uncorking a socket with AF_INET pending data

Wei Yongjun <[email protected]>
l2tp: add missing .owner to struct pppox_proto

Amerigo Wang <[email protected]>

    ipv6,mcast: always hold idev->lock before mca_lock

Changli Gao <[email protected]>
net: Swap ver and type in pppoe_hdr

Dave Jones <[email protected]>
x25: Fix broken locking in ioctl error paths.

Eric Dumazet <[email protected]>
neighbour: fix a race in neigh_destroy()

Mathias Krause <[email protected]>
af_key: fix info leaks in notify messages

Eric Dumazet <[email protected]>
ipv6: ip6_sk_dst_check() must not assume ipv6 dst

Gao feng <[email protected]>
ipv6: don't call addrconf_dst_alloc again when enable lo

Linus Lüssing <[email protected]>
bridge: fix switched interval for MLD Query types

Dave Kleikamp <[email protected]>
sparc: tsb must be flushed before tlb

bob picco <[email protected]>
sparc64 address-congruence property

Olivier DANET <[email protected]>
sparc32: vm_area_struct access for old Sun SPARCs.

Peter Zijlstra <[email protected]>
perf: Fix perf_lock_task_context() vs RCU

Jiri Olsa <[email protected]>
perf: Remove WARN_ON_ONCE() check in __perf_event_enable() for valid scenario

Jiri Olsa <[email protected]>
perf: Clone child context from parent context pmu

Steven Rostedt (Red Hat) <[email protected]>
tracing: Use current_uid() for critical time tracing

Sreekanth Reddy <[email protected]>
SCSI: mpt2sas: fix firmware failure with wrong task attribute

Daniel Hansel <[email protected]>
SCSI: zfcp: fix adapter (re)open recovery while link to SAN is down

Gabor Juhos <[email protected]>
rt2x00: read 5GHz TX power values from the correct offset

Fabio Estevam <[email protected]>

    ASoC: sglt5000: Fix SGTL5000_PLL_FRAC_DIV_MASK

Thomas Gleixner <[email protected]>
tick: Prevent uncontrolled switch to oneshot mode

-------------

Diffstat:

 Makefile                                  |  4 ++--
 arch/sparc/kernel/asm-offsets.c           |  2 ++
 arch/sparc/mm/hypersparc.S                |  8 ++++----
 arch/sparc/mm/init_64.c                   |  9 ++++++++-
 arch/sparc/mm/swift.S                     |  8 ++++----
 arch/sparc/mm/tlb.c                       |  2 +-
 arch/sparc/mm/tsunami.S                   |  6 +++---
 arch/sparc/mm/viking.S                    | 10 +++++-----
 drivers/net/dummy.c                       |  4 ++++
 drivers/net/ifb.c                         |  8 +++++++-
 drivers/net/sunvnet.c                     |  2 ++
 drivers/net/wireless/rt2x00/rt2800lib.c   |  4 ++--
 drivers/net/wireless/rt2x00/rt61pci.c     |  3 ++-
 drivers/net/wireless/rt2x00/rt73usb.c     |  3 ++-
 drivers/s390/scsi/zfcp_aux.c              |  5 ++++-
 drivers/s390/scsi/zfcp_fsf.c              | 25 +++++++++++++++++++------
 drivers/scsi/bnx2fc/bnx2fc_io.c           |  2 +-
 drivers/scsi/megaraid/megaraid_sas_base.c | 10 ++++++----
 drivers/scsi/mpt2sas/mpt2sas_scsih.c      |  6 +-----
 drivers/usb/serial/cp210x.c               |  4 ++++
 drivers/usb/serial/option.c               | 23 +++++++++++++----------
 fs/block_dev.c                            | 10 +++++++++-
 fs/lockd/svclock.c                        |  4 ++++
 include/linux/if_pppox.h                  |  4 ++--
 include/net/addrconf.h                    |  3 +++
 include/net/udp.h                         |  1 +
 kernel/events/core.c                      | 28 +++++++++++++++++++++++++---
 kernel/hrtimer.c                          | 28 +++++++++++++---------------
 kernel/time/tick-broadcast.c              | 10 +++++++++-
 kernel/trace/trace.c                      | 10 +++++++++-
 kernel/trace/trace_syscalls.c             | 18 ++++++++++++++----
 net/8021q/vlan_dev.c                      |  7 +++++++
 net/bridge/br_multicast.c                 |  5 +++--
 net/core/neighbour.c                      | 12 +++++++-----
 net/ipv4/udp.c                            |  3 ++-
 net/ipv6/addrconf.c                       | 31 +++++++++++++++++++++----------
 net/ipv6/ip6_output.c                     |  8 +++++++-
 net/ipv6/mcast.c                          | 18 ++++++++++--------
 net/ipv6/udp.c                            |  7 ++++++-
 net/key/af_key.c                          |  2 ++
 net/l2tp/l2tp_ppp.c                       |  3 ++-
 net/x25/af_x25.c                          | 15 ++++++++-------
 sound/soc/codecs/sgtl5000.h               |  2 +-
 sound/usb/6fire/pcm.c                     |  2 +-
 44 files changed, 262 insertions(+), 117 deletions(-)

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Thomas Gleixner <[email protected]>

commit 1f73a9806bdd07a5106409bbcab3884078bd34fe upstream.

When the system switches from periodic to oneshot mode, the broadcast logic causes a possibility that a CPU which has not yet switched to oneshot mode puts its own clock event device into oneshot mode without updating the state and the timer handler.

CPU0 CPU1
per cpu tickdev is in periodic mode and switched to broadcast

Switch to oneshot mode
tick_broadcast_switch_to_oneshot()
cpumask_copy(tick_oneshot_broacast_mask,

	       tick_broadcast_mask);

broadcast device mode = oneshot

				Timer interrupt

				irq_enter()
				 tick_check_oneshot_broadcast()
				  dev->set_mode(ONESHOT);

				tick_handle_periodic()
				 if (dev->mode == ONESHOT)
				   dev->next_event += period;
				   FAIL.

We fail, because dev->next_event contains KTIME_MAX, if the device was in periodic mode before the uncontrolled switch to oneshot happened.

We must copy the broadcast bits over to the oneshot mask, because otherwise a CPU which relies on the broadcast would not been woken up anymore after the broadcast device switched to oneshot mode.

So we need to verify in tick_check_oneshot_broadcast() whether the CPU has already switched to oneshot mode. If not, leave the device untouched and let the CPU switch controlled into oneshot mode.

This is a long standing bug, which was never noticed, because the main user of the broadcast x86 cannot run into that scenario, AFAICT. The nonarchitected timer mess of ARM creates a gazillion of differently broken abominations which trigger the shortcomings of that broadcast code, which better had never been necessary in the first place.

---
 kernel/time/tick-broadcast.c |   10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

@@ -396,7 +396,15 @@ void tick_check_oneshot_broadcast(int cp
 	if (cpumask_test_cpu(cpu, to_cpumask(tick_broadcast_oneshot_mask))) {
 		struct tick_device *td = &per_cpu(tick_cpu_device, cpu);
 
-		clockevents_set_mode(td->evtdev, CLOCK_EVT_MODE_ONESHOT);
+		/*
+		 * We might be in the middle of switching over from
+		 * periodic to oneshot. If the CPU has not yet
+		 * switched over, leave the device alone.
+		 */
+		if (td->mode == TICKDEV_MODE_ONESHOT) {
+			clockevents_set_mode(td->evtdev,
+					     CLOCK_EVT_MODE_ONESHOT);
+		}
 	}
 }
 

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Fabio Estevam <[email protected]>

commit 5c78dfe87ea04b501ee000a7f03b9432ac9d008c upstream.

SGTL5000_PLL_FRAC_DIV_MASK is used to mask bits 0-10 (11 bits in total) of register CHIP_PLL_CTRL, so fix the mask to accomodate all this bit range.

---
 sound/soc/codecs/sgtl5000.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -347,7 +347,7 @@
 #define SGTL5000_PLL_INT_DIV_MASK		0xf800
 #define SGTL5000_PLL_INT_DIV_SHIFT		11
 #define SGTL5000_PLL_INT_DIV_WIDTH		5
-#define SGTL5000_PLL_FRAC_DIV_MASK		0x0700
+#define SGTL5000_PLL_FRAC_DIV_MASK		0x07ff
 #define SGTL5000_PLL_FRAC_DIV_SHIFT		0
 #define SGTL5000_PLL_FRAC_DIV_WIDTH		11
 

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Gabor Juhos <[email protected]>

commit 0a6f3a8ebaf13407523c2c7d575b4ca2debd23ba upstream.

The current code uses the same index value both for the channel information array and for the TX power table. The index starts from 14, however the index of the TX power table must start from zero.

Fix it, in order to get the correct TX power value for a given channel.

The changes in rt61pci.c and rt73usb.c are compile tested only.

---
 drivers/net/wireless/rt2x00/rt2800lib.c |    4 ++--
 drivers/net/wireless/rt2x00/rt61pci.c   |    3 ++-
 drivers/net/wireless/rt2x00/rt73usb.c   |    3 ++-
 3 files changed, 6 insertions(+), 4 deletions(-)

@@ -4075,8 +4075,8 @@ int rt2800_probe_hw_mode(struct rt2x00_d
 		default_power2 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A2);
 
 		for (i = 14; i < spec->num_channels; i++) {
-			info[i].default_power1 = default_power1[i];
-			info[i].default_power2 = default_power2[i];
+			info[i].default_power1 = default_power1[i - 14];
+			info[i].default_power2 = default_power2[i - 14];
 		}
 	}
 

@@ -2830,7 +2830,8 @@ static int rt61pci_probe_hw_mode(struct
 		tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A_START);
 		for (i = 14; i < spec->num_channels; i++) {
 			info[i].max_power = MAX_TXPOWER;
-			info[i].default_power1 = TXPOWER_FROM_DEV(tx_power[i]);
+			info[i].default_power1 =
+					TXPOWER_FROM_DEV(tx_power[i - 14]);
 		}
 	}
 

@@ -2167,7 +2167,8 @@ static int rt73usb_probe_hw_mode(struct
 		tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A_START);
 		for (i = 14; i < spec->num_channels; i++) {
 			info[i].max_power = MAX_TXPOWER;
-			info[i].default_power1 = TXPOWER_FROM_DEV(tx_power[i]);
+			info[i].default_power1 =
+					TXPOWER_FROM_DEV(tx_power[i - 14]);
 		}
 	}
 

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Daniel Hansel <[email protected]>

commit f76ccaac4f82c463a037aa4a1e4ccb85c7011814 upstream.

FCP device remains in status ERP_FAILED when device is switched online or adapter recovery is triggered while link to SAN is down.

When Exchange Configuration Data command returns the FSF status FSF_EXCHANGE_CONFIG_DATA_INCOMPLETE it aborts the exchange process. The only retries are done during the common error recovery procedure (i.e. max. 3 retries with 8sec sleep between) and remains in status ERP_FAILED with QDIO down.

This commit reverts the commit 0df138476c8306478d6e726f044868b4bccf411c (zfcp: Fix adapter activation on link down).
When FSF status FSF_EXCHANGE_CONFIG_DATA_INCOMPLETE is received the adapter recovery will be finished without any retries. QDIO will be up now and status changes such as LINK UP will be received now.

---
 drivers/s390/scsi/zfcp_fsf.c |    4 ++++
 1 file changed, 4 insertions(+)

@@ -534,6 +534,10 @@ static void zfcp_fsf_exchange_config_dat
 		fc_host_port_type(shost) = FC_PORTTYPE_UNKNOWN;
 		adapter->hydra_version = 0;
 
+		/* avoids adapter shutdown to be able to recognize
+		 * events such as LINK UP */
+		atomic_set_mask(ZFCP_STATUS_ADAPTER_XCONFIG_OK,
+				&adapter->status);
 		zfcp_fsf_link_down_info_eval(req,
 			&qtcb->header.fsf_status_qual.link_down_info);
 		break;

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Sreekanth Reddy <[email protected]>

commit 48ba2efc382f94fae16ca8ca011e5961a81ad1ea upstream.

When SCSI command is received with task attribute not set, set it to SIMPLE. Previously it is set to untagged. This causes the firmware to fail the commands.

---
 drivers/scsi/mpt2sas/mpt2sas_scsih.c |    6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)

@@ -3740,11 +3740,7 @@ _scsih_qcmd_lck(struct scsi_cmnd *scmd,
 			else
 				mpi_control |= MPI2_SCSIIO_CONTROL_SIMPLEQ;
 		} else
-/* MPI Revision I (UNIT = 0xA) - removed MPI2_SCSIIO_CONTROL_UNTAGGED */
-/*			mpi_control |= MPI2_SCSIIO_CONTROL_UNTAGGED;
- */
-			mpi_control |= (0x500);
-
+			mpi_control |= MPI2_SCSIIO_CONTROL_SIMPLEQ;
 	} else
 		mpi_control |= MPI2_SCSIIO_CONTROL_SIMPLEQ;
 	/* Make sure Device is not raid volume.

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: "Steven Rostedt (Red Hat)" <[email protected]>

commit f17a5194859a82afe4164e938b92035b86c55794 upstream.

The irqsoff tracer records the max time that interrupts are disabled. There are hooks in the assembly code that calls back into the tracer when interrupts are disabled or enabled.

When they are enabled, the tracer checks if the amount of time they were disabled is larger than the previous recorded max interrupts off time. If it is, it creates a snapshot of the currently running trace to store where the last largest interrupts off time was held and how it happened.

During testing, this RCU lockdep dump appeared:

[ 1257.829021] ===============================
[ 1257.829021] [ INFO: suspicious RCU usage. ]
[ 1257.829021] 3.10.0-rc1-test+ #171 Tainted: G        W
[ 1257.829021] -------------------------------
[ 1257.829021] /home/rostedt/work/git/linux-trace.git/include/linux/rcupdate.h:780 rcu_read_lock() used illegally while idle!
[ 1257.829021]
[ 1257.829021] other info that might help us debug this:
[ 1257.829021]
[ 1257.829021]
[ 1257.829021] RCU used illegally from idle CPU!
[ 1257.829021] rcu_scheduler_active = 1, debug_locks = 0
[ 1257.829021] RCU used illegally from extended quiescent state!
[ 1257.829021] 2 locks held by trace-cmd/4831:
[ 1257.829021]  #0:  (max_trace_lock){......}, at: [<ffffffff810e2b77>] stop_critical_timing+0x1a3/0x209
[ 1257.829021]  #1:  (rcu_read_lock){.+.+..}, at: [<ffffffff810dae5a>] __update_max_tr+0x88/0x1ee
[ 1257.829021]
[ 1257.829021] stack backtrace:
[ 1257.829021] CPU: 3 PID: 4831 Comm: trace-cmd Tainted: G        W    3.10.0-rc1-test+ #171
[ 1257.829021] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M., BIOS SDBLI944.86P 05/08/2007
[ 1257.829021]  0000000000000001 ffff880065f49da8 ffffffff8153dd2b ffff880065f49dd8
[ 1257.829021]  ffffffff81092a00 ffff88006bd78680 ffff88007add7500 0000000000000003
[ 1257.829021]  ffff88006bd78680 ffff880065f49e18 ffffffff810daebf ffffffff810dae5a
[ 1257.829021] Call Trace:
[ 1257.829021]  [<ffffffff8153dd2b>] dump_stack+0x19/0x1b
[ 1257.829021]  [<ffffffff81092a00>] lockdep_rcu_suspicious+0x109/0x112
[ 1257.829021]  [<ffffffff810daebf>] __update_max_tr+0xed/0x1ee
[ 1257.829021]  [<ffffffff810dae5a>] ? __update_max_tr+0x88/0x1ee
[ 1257.829021]  [<ffffffff811002b9>] ? user_enter+0xfd/0x107
[ 1257.829021]  [<ffffffff810dbf85>] update_max_tr_single+0x11d/0x12d
[ 1257.829021]  [<ffffffff811002b9>] ? user_enter+0xfd/0x107
[ 1257.829021]  [<ffffffff810e2b15>] stop_critical_timing+0x141/0x209
[ 1257.829021]  [<ffffffff8109569a>] ? trace_hardirqs_on+0xd/0xf
[ 1257.829021]  [<ffffffff811002b9>] ? user_enter+0xfd/0x107
[ 1257.829021]  [<ffffffff810e3057>] time_hardirqs_on+0x2a/0x2f
[ 1257.829021]  [<ffffffff811002b9>] ? user_enter+0xfd/0x107
[ 1257.829021]  [<ffffffff8109550c>] trace_hardirqs_on_caller+0x16/0x197
[ 1257.829021]  [<ffffffff8109569a>] trace_hardirqs_on+0xd/0xf
[ 1257.829021]  [<ffffffff811002b9>] user_enter+0xfd/0x107
[ 1257.829021]  [<ffffffff810029b4>] do_notify_resume+0x92/0x97
[ 1257.829021]  [<ffffffff8154bdca>] int_signal+0x12/0x17

What happened was entering into the user code, the interrupts were enabled and a max interrupts off was recorded. The trace buffer was saved along with various information about the task: comm, pid, uid, priority, etc.

The uid is recorded with task_uid(tsk). But this is a macro that uses rcu_read_lock() to retrieve the data, and this happened to happen where RCU is blind (user_enter).

As only the preempt and irqs off tracers can have this happen, and they both only have the tsk == current, if tsk == current, use current_uid() instead of task_uid(), as current_uid() does not use RCU as only current can change its uid.

This fixes the RCU suspicious splat.

---
 kernel/trace/trace.c |   10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

@@ -628,7 +628,15 @@ __update_max_tr(struct trace_array *tr,
 
 	memcpy(max_data->comm, tsk->comm, TASK_COMM_LEN);
 	max_data->pid = tsk->pid;
-	max_data->uid = task_uid(tsk);
+	/*
+	 * If tsk == current, then use current_uid(), as that does not use
+	 * RCU. The irq tracer can be called out of RCU scope.
+	 */
+	if (tsk == current)
+		max_data->uid = current_uid();
+	else
+		max_data->uid = task_uid(tsk);
+
 	max_data->nice = tsk->static_prio - 20 - MAX_RT_PRIO;
 	max_data->policy = tsk->policy;
 	max_data->rt_priority = tsk->rt_priority;

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jiri Olsa <[email protected]>

commit 734df5ab549ca44f40de0f07af1c8803856dfb18 upstream.

Currently when the child context for inherited events is created, it's based on the pmu object of the first event of the parent context.

This is wrong for the following scenario:

- HW context having HW and SW event
- HW event got removed (closed)
- SW event stays in HW context as the only event and its pmu is used to clone the child context

The issue starts when the cpu context object is touched based on the pmu context object (__get_cpu_context). In this case the HW context will work with SW cpu context ending up with following WARN below.

Fixing this by using parent context pmu object to clone from child context.

Addresses the following warning reported by Vince Weaver:

[ 2716.472065] ------------[ cut here ]------------
[ 2716.476035] WARNING: at kernel/events/core.c:2122 task_ctx_sched_out+0x3c/0x)
[ 2716.476035] Modules linked in: nfsd auth_rpcgss oid_registry nfs_acl nfs locn
[ 2716.476035] CPU: 0 PID: 3164 Comm: perf_fuzzer Not tainted 3.10.0-rc4 #2
[ 2716.476035] Hardware name: AOpen   DE7000/nMCP7ALPx-DE R1.06 Oct.19.2012, BI2
[ 2716.476035]  0000000000000000 ffffffff8102e215 0000000000000000 ffff88011fc18
[ 2716.476035]  ffff8801175557f0 0000000000000000 ffff880119fda88c ffffffff810ad
[ 2716.476035]  ffff880119fda880 ffffffff810af02a 0000000000000009 ffff880117550
[ 2716.476035] Call Trace:
[ 2716.476035]  [<ffffffff8102e215>] ? warn_slowpath_common+0x5b/0x70
[ 2716.476035]  [<ffffffff810ab2bd>] ? task_ctx_sched_out+0x3c/0x5f
[ 2716.476035]  [<ffffffff810af02a>] ? perf_event_exit_task+0xbf/0x194
[ 2716.476035]  [<ffffffff81032a37>] ? do_exit+0x3e7/0x90c
[ 2716.476035]  [<ffffffff810cd5ab>] ? __do_fault+0x359/0x394
[ 2716.476035]  [<ffffffff81032fe6>] ? do_group_exit+0x66/0x98
[ 2716.476035]  [<ffffffff8103dbcd>] ? get_signal_to_deliver+0x479/0x4ad
[ 2716.476035]  [<ffffffff810ac05c>] ? __perf_event_task_sched_out+0x230/0x2d1
[ 2716.476035]  [<ffffffff8100205d>] ? do_signal+0x3c/0x432
[ 2716.476035]  [<ffffffff810abbf9>] ? ctx_sched_in+0x43/0x141
[ 2716.476035]  [<ffffffff810ac2ca>] ? perf_event_context_sched_in+0x7a/0x90
[ 2716.476035]  [<ffffffff810ac311>] ? __perf_event_task_sched_in+0x31/0x118
[ 2716.476035]  [<ffffffff81050dd9>] ? mmdrop+0xd/0x1c
[ 2716.476035]  [<ffffffff81051a39>] ? finish_task_switch+0x7d/0xa6
[ 2716.476035]  [<ffffffff81002473>] ? do_notify_resume+0x20/0x5d
[ 2716.476035]  [<ffffffff813654f5>] ? retint_signal+0x3d/0x78
[ 2716.476035] ---[ end trace 827178d8a5966c3d ]---

---
 kernel/events/core.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -7064,7 +7064,7 @@ inherit_task_group(struct perf_event *ev
 		 * child.
 		 */
 
-		child_ctx = alloc_perf_context(event->pmu, child);
+		child_ctx = alloc_perf_context(parent_ctx->pmu, child);
 		if (!child_ctx)
 			return -ENOMEM;
 

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jiri Olsa <[email protected]>

commit 06f417968beac6e6b614e17b37d347aa6a6b1d30 upstream.

The '!ctx->is_active' check has a valid scenario, so there's no need for the warning.

The reason is that there's a time window between the 'ctx->is_active' check in the perf_event_enable() function and the __perf_event_enable() function having:

- IRQs on
- ctx->lock unlocked

where the task could be killed and 'ctx' deactivated by perf_event_exit_task(), ending up with the warning below.

So remove the WARN_ON_ONCE() check and add comments to explain it all.

This addresses the following warning reported by Vince Weaver:

[  324.983534] ------------[ cut here ]------------
[  324.984420] WARNING: at kernel/events/core.c:1953 __perf_event_enable+0x187/0x190()
[  324.984420] Modules linked in:
[  324.984420] CPU: 19 PID: 2715 Comm: nmi_bug_snb Not tainted 3.10.0+ #246
[  324.984420] Hardware name: Supermicro X8DTN/X8DTN, BIOS 4.6.3 01/08/2010
[  324.984420]  0000000000000009 ffff88043fce3ec8 ffffffff8160ea0b ffff88043fce3f00
[  324.984420]  ffffffff81080ff0 ffff8802314fdc00 ffff880231a8f800 ffff88043fcf7860
[  324.984420]  0000000000000286 ffff880231a8f800 ffff88043fce3f10 ffffffff8108103a
[  324.984420] Call Trace:
[  324.984420]  <IRQ>  [<ffffffff8160ea0b>] dump_stack+0x19/0x1b
[  324.984420]  [<ffffffff81080ff0>] warn_slowpath_common+0x70/0xa0
[  324.984420]  [<ffffffff8108103a>] warn_slowpath_null+0x1a/0x20
[  324.984420]  [<ffffffff81134437>] __perf_event_enable+0x187/0x190
[  324.984420]  [<ffffffff81130030>] remote_function+0x40/0x50
[  324.984420]  [<ffffffff810e51de>] generic_smp_call_function_single_interrupt+0xbe/0x130
[  324.984420]  [<ffffffff81066a47>] smp_call_function_single_interrupt+0x27/0x40
[  324.984420]  [<ffffffff8161fd2f>] call_function_single_interrupt+0x6f/0x80
[  324.984420]  <EOI>  [<ffffffff816161a1>] ? _raw_spin_unlock_irqrestore+0x41/0x70
[  324.984420]  [<ffffffff8113799d>] perf_event_exit_task+0x14d/0x210
[  324.984420]  [<ffffffff810acd04>] ? switch_task_namespaces+0x24/0x60
[  324.984420]  [<ffffffff81086946>] do_exit+0x2b6/0xa40
[  324.984420]  [<ffffffff8161615c>] ? _raw_spin_unlock_irq+0x2c/0x30
[  324.984420]  [<ffffffff81087279>] do_group_exit+0x49/0xc0
[  324.984420]  [<ffffffff81096854>] get_signal_to_deliver+0x254/0x620
[  324.984420]  [<ffffffff81043057>] do_signal+0x57/0x5a0
[  324.984420]  [<ffffffff8161a164>] ? __do_page_fault+0x2a4/0x4e0
[  324.984420]  [<ffffffff8161665c>] ? retint_restore_args+0xe/0xe
[  324.984420]  [<ffffffff816166cd>] ? retint_signal+0x11/0x84
[  324.984420]  [<ffffffff81043605>] do_notify_resume+0x65/0x80
[  324.984420]  [<ffffffff81616702>] retint_signal+0x46/0x84
[  324.984420] ---[ end trace 442ec2f04db3771a ]---

---
 kernel/events/core.c |   11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

@@ -1616,7 +1616,16 @@ static int __perf_event_enable(void *inf
 	struct perf_cpu_context *cpuctx = __get_cpu_context(ctx);
 	int err;
 
-	if (WARN_ON_ONCE(!ctx->is_active))
+	/*
+	 * There's a time window between 'ctx->is_active' check
+	 * in perf_event_enable function and this place having:
+	 *   - IRQs on
+	 *   - ctx->lock unlocked
+	 *
+	 * where the task could be killed and 'ctx' deactivated
+	 * by perf_event_exit_task.
+	 */
+	if (!ctx->is_active)
 		return -EINVAL;
 
 	raw_spin_lock(&ctx->lock);

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Peter Zijlstra <[email protected]>

commit 058ebd0eba3aff16b144eabf4510ed9510e1416e upstream.

Jiri managed to trigger this warning:

[] ======================================================
[] [ INFO: possible circular locking dependency detected ]
[] 3.10.0+ #228 Tainted: G W
[] -------------------------------------------------------
[] p/6613 is trying to acquire lock:
[] (rcu_node_0){..-...}, at: [<ffffffff810ca797>] rcu_read_unlock_special+0xa7/0x250 []
[] but task is already holding lock:
[] (&ctx->lock){-.-...}, at: [<ffffffff810f2879>] perf_lock_task_context+0xd9/0x2c0 []
[] which lock already depends on the new lock.
[]
[] the existing dependency chain (in reverse order) is:
[]
[] -> #4 (&ctx->lock){-.-...}:
[] -> #3 (&rq->lock){-.-.-.}:
[] -> #2 (&p->pi_lock){-.-.-.}:
[] -> #1 (&rnp->nocb_gp_wq[1]){......}:
[] -> #0 (rcu_node_0){..-...}:

Paul was quick to explain that due to preemptible RCU we cannot call rcu_read_unlock() while holding scheduler (or nested) locks when part of the read side critical section was preemptible.

Therefore solve it by making the entire RCU read side non-preemptible.

Also pull out the retry from under the non-preempt to play nice with RT.

---
 kernel/events/core.c |   15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)

@@ -651,8 +651,18 @@ perf_lock_task_context(struct task_struc
 {
 	struct perf_event_context *ctx;
 
-	rcu_read_lock();
 retry:
+	/*
+	 * One of the few rules of preemptible RCU is that one cannot do
+	 * rcu_read_unlock() while holding a scheduler (or nested) lock when
+	 * part of the read side critical section was preemptible -- see
+	 * rcu_read_unlock_special().
+	 *
+	 * Since ctx->lock nests under rq->lock we must ensure the entire read
+	 * side critical section is non-preemptible.
+	 */
+	preempt_disable();
+	rcu_read_lock();
 	ctx = rcu_dereference(task->perf_event_ctxp[ctxn]);
 	if (ctx) {
 		/*

@@ -668,6 +678,8 @@ retry:
 		raw_spin_lock_irqsave(&ctx->lock, *flags);
 		if (ctx != rcu_dereference(task->perf_event_ctxp[ctxn])) {
 			raw_spin_unlock_irqrestore(&ctx->lock, *flags);
+			rcu_read_unlock();
+			preempt_enable();
 			goto retry;
 		}
 

@@ -677,6 +689,7 @@ retry:
 		}
 	}
 	rcu_read_unlock();
+	preempt_enable();
 	return ctx;
 }
 

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Olivier DANET <[email protected]>

Commit e4c6bfd2d79d063017ab19a18915f0bc759f32d9 ("mm: rearrange vm_area_struct for fewer cache misses") changed the layout of the vm_area_struct structure, it broke several SPARC32 assembly routines which used numerical constants for accessing the vm_mm field.

This patch defines the VMA_VM_MM constant to replace the immediate values.

---
 arch/sparc/kernel/asm-offsets.c |    2 ++
 arch/sparc/mm/hypersparc.S      |    8 ++++----
 arch/sparc/mm/swift.S           |    8 ++++----
 arch/sparc/mm/tsunami.S         |    6 +++---
 arch/sparc/mm/viking.S          |   10 +++++-----
 5 files changed, 18 insertions(+), 16 deletions(-)

@@ -34,6 +34,8 @@ int foo(void)
 	DEFINE(AOFF_task_thread, offsetof(struct task_struct, thread));
 	BLANK();
 	DEFINE(AOFF_mm_context, offsetof(struct mm_struct, context));
+	BLANK();
+	DEFINE(VMA_VM_MM,    offsetof(struct vm_area_struct, vm_mm));
 
 	/* DEFINE(NUM_USER_SEGMENTS, TASK_SIZE>>28); */
 	return 0;

@@ -74,7 +74,7 @@ hypersparc_flush_cache_mm_out:
 
 	/* The things we do for performance... */
 hypersparc_flush_cache_range:
-	ld	[%o0 + 0x0], %o0		/* XXX vma->vm_mm, GROSS XXX */
+	ld	[%o0 + VMA_VM_MM], %o0
 #ifndef CONFIG_SMP
 	ld	[%o0 + AOFF_mm_context], %g1
 	cmp	%g1, -1

@@ -163,7 +163,7 @@ hypersparc_flush_cache_range_out:
 	 */
 	/* Verified, my ass... */
 hypersparc_flush_cache_page:
-	ld	[%o0 + 0x0], %o0		/* XXX vma->vm_mm, GROSS XXX */
+	ld	[%o0 + VMA_VM_MM], %o0
 	ld	[%o0 + AOFF_mm_context], %g2
 #ifndef CONFIG_SMP
 	cmp	%g2, -1

@@ -284,7 +284,7 @@ hypersparc_flush_tlb_mm_out:
 	 sta	%g5, [%g1] ASI_M_MMUREGS
 
 hypersparc_flush_tlb_range:
-	ld	[%o0 + 0x00], %o0	/* XXX vma->vm_mm GROSS XXX */
+	ld	[%o0 + VMA_VM_MM], %o0
 	mov	SRMMU_CTX_REG, %g1
 	ld	[%o0 + AOFF_mm_context], %o3
 	lda	[%g1] ASI_M_MMUREGS, %g5

@@ -307,7 +307,7 @@ hypersparc_flush_tlb_range_out:
 	 sta	%g5, [%g1] ASI_M_MMUREGS
 
 hypersparc_flush_tlb_page:
-	ld	[%o0 + 0x00], %o0	/* XXX vma->vm_mm GROSS XXX */
+	ld	[%o0 + VMA_VM_MM], %o0
 	mov	SRMMU_CTX_REG, %g1
 	ld	[%o0 + AOFF_mm_context], %o3
 	andn	%o1, (PAGE_SIZE - 1), %o1

@@ -105,7 +105,7 @@ swift_flush_cache_mm_out:
 
 	.globl	swift_flush_cache_range
 swift_flush_cache_range:
-	ld	[%o0 + 0x0], %o0		/* XXX vma->vm_mm, GROSS XXX */
+	ld	[%o0 + VMA_VM_MM], %o0
 	sub	%o2, %o1, %o2
 	sethi	%hi(4096), %o3
 	cmp	%o2, %o3

@@ -116,7 +116,7 @@ swift_flush_cache_range:
 
 	.globl	swift_flush_cache_page
 swift_flush_cache_page:
-	ld	[%o0 + 0x0], %o0		/* XXX vma->vm_mm, GROSS XXX */
+	ld	[%o0 + VMA_VM_MM], %o0
 70:
 	ld	[%o0 + AOFF_mm_context], %g2
 	cmp	%g2, -1

@@ -219,7 +219,7 @@ swift_flush_sig_insns:
 	.globl	swift_flush_tlb_range
 	.globl	swift_flush_tlb_all
 swift_flush_tlb_range:
-	ld	[%o0 + 0x00], %o0	/* XXX vma->vm_mm GROSS XXX */
+	ld	[%o0 + VMA_VM_MM], %o0
 swift_flush_tlb_mm:
 	ld	[%o0 + AOFF_mm_context], %g2
 	cmp	%g2, -1

@@ -233,7 +233,7 @@ swift_flush_tlb_all_out:
 
 	.globl	swift_flush_tlb_page
 swift_flush_tlb_page:
-	ld	[%o0 + 0x00], %o0	/* XXX vma->vm_mm GROSS XXX */
+	ld	[%o0 + VMA_VM_MM], %o0
 	mov	SRMMU_CTX_REG, %g1
 	ld	[%o0 + AOFF_mm_context], %o3
 	andn	%o1, (PAGE_SIZE - 1), %o1

@@ -24,7 +24,7 @@
 	/* Sliiick... */
 tsunami_flush_cache_page:
 tsunami_flush_cache_range:
-	ld	[%o0 + 0x0], %o0	/* XXX vma->vm_mm, GROSS XXX */
+	ld	[%o0 + VMA_VM_MM], %o0
 tsunami_flush_cache_mm:
 	ld	[%o0 + AOFF_mm_context], %g2
 	cmp	%g2, -1

@@ -46,7 +46,7 @@ tsunami_flush_sig_insns:
 
 	/* More slick stuff... */
 tsunami_flush_tlb_range:
-	ld	[%o0 + 0x00], %o0	/* XXX vma->vm_mm GROSS XXX */
+	ld	[%o0 + VMA_VM_MM], %o0
 tsunami_flush_tlb_mm:
 	ld	[%o0 + AOFF_mm_context], %g2
 	cmp	%g2, -1

@@ -65,7 +65,7 @@ tsunami_flush_tlb_out:
 
 	/* This one can be done in a fine grained manner... */
 tsunami_flush_tlb_page:
-	ld	[%o0 + 0x00], %o0	/* XXX vma->vm_mm GROSS XXX */
+	ld	[%o0 + VMA_VM_MM], %o0
 	mov	SRMMU_CTX_REG, %g1
 	ld	[%o0 + AOFF_mm_context], %o3
 	andn	%o1, (PAGE_SIZE - 1), %o1

@@ -109,7 +109,7 @@ viking_mxcc_flush_page:
 viking_flush_cache_page:
 viking_flush_cache_range:
 #ifndef CONFIG_SMP
-	ld	[%o0 + 0x0], %o0		/* XXX vma->vm_mm, GROSS XXX */
+	ld	[%o0 + VMA_VM_MM], %o0
 #endif
 viking_flush_cache_mm:
 #ifndef CONFIG_SMP

@@ -149,7 +149,7 @@ viking_flush_tlb_mm:
 #endif
 
 viking_flush_tlb_range:
-	ld	[%o0 + 0x00], %o0	/* XXX vma->vm_mm GROSS XXX */
+	ld	[%o0 + VMA_VM_MM], %o0
 	mov	SRMMU_CTX_REG, %g1
 	ld	[%o0 + AOFF_mm_context], %o3
 	lda	[%g1] ASI_M_MMUREGS, %g5

@@ -174,7 +174,7 @@ viking_flush_tlb_range:
 #endif
 
 viking_flush_tlb_page:
-	ld	[%o0 + 0x00], %o0	/* XXX vma->vm_mm GROSS XXX */
+	ld	[%o0 + VMA_VM_MM], %o0
 	mov	SRMMU_CTX_REG, %g1
 	ld	[%o0 + AOFF_mm_context], %o3
 	lda	[%g1] ASI_M_MMUREGS, %g5

@@ -240,7 +240,7 @@ sun4dsmp_flush_tlb_range:
 	tst	%g5
 	bne	3f
 	 mov	SRMMU_CTX_REG, %g1
-	ld	[%o0 + 0x00], %o0	/* XXX vma->vm_mm GROSS XXX */
+	ld	[%o0 + VMA_VM_MM], %o0
 	ld	[%o0 + AOFF_mm_context], %o3
 	lda	[%g1] ASI_M_MMUREGS, %g5
 	sethi	%hi(~((1 << SRMMU_PGDIR_SHIFT) - 1)), %o4

@@ -266,7 +266,7 @@ sun4dsmp_flush_tlb_page:
 	tst	%g5
 	bne	2f
 	 mov	SRMMU_CTX_REG, %g1
-	ld	[%o0 + 0x00], %o0	/* XXX vma->vm_mm GROSS XXX */
+	ld	[%o0 + VMA_VM_MM], %o0
 	ld	[%o0 + AOFF_mm_context], %o3
 	lda	[%g1] ASI_M_MMUREGS, %g5
 	and	%o1, PAGE_MASK, %o1

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: bob picco <[email protected]>

The Machine Description (MD) property "address-congruence-offset" is optional. According to the MD specification the value is assumed 0UL when not present. This caused early boot failure on T5.

---
 arch/sparc/mm/init_64.c |    9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

@@ -1071,7 +1071,14 @@ static int __init grab_mblocks(struct md
 		m->size = *val;
 		val = mdesc_get_property(md, node,
 					 "address-congruence-offset", NULL);
-		m->offset = *val;
+
+		/* The address-congruence-offset property is optional.
+		 * Explicity zero it be identifty this.
+		 */
+		if (val)
+			m->offset = *val;
+		else
+			m->offset = 0UL;
 
 		numadbg("MBLOCK[%d]: base[%llx] size[%llx] offset[%llx]\n",
 			count - 1, m->base, m->size, m->offset);

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Dave Kleikamp <[email protected]>

This fixes a race where a cpu may re-load a tlb from a stale tsb right after it has been flushed by a remote function call.

I still see some instability when stressing the system with parallel kernel builds while creating memory pressure by writing to /proc/sys/vm/nr_hugepages, but this patch improves the stability significantly.

---
 arch/sparc/mm/tlb.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -115,8 +115,8 @@ no_cache_flush:
 	}
 
 	if (!tb->active) {
-		global_flush_tlb_page(mm, vaddr);
 		flush_tsb_user_page(mm, vaddr);
+		global_flush_tlb_page(mm, vaddr);
 		goto out;
 	}
 

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Linus Lüssing <[email protected]>

[ Upstream commit 32de868cbc6bee010d2cee95b5071b25ecbec8c3 ]

General Queries (the one with the Multicast Address field set to zero / '::') are supposed to have a Maximum Response Delay of [Query Response Interval], while for Multicast-Address-Specific Queries it is [Last Listener Query Interval] - not the other way round. (see RFC2710, section 7.3+7.8)

---
 net/bridge/br_multicast.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

@@ -467,8 +467,9 @@ static struct sk_buff *br_ip6_multicast_
 	skb_set_transport_header(skb, skb->len);
 	mldq = (struct mld_msg *) icmp6_hdr(skb);
 
-	interval = ipv6_addr_any(group) ? br->multicast_last_member_interval :
-					  br->multicast_query_response_interval;
+	interval = ipv6_addr_any(group) ?
+			br->multicast_query_response_interval :
+			br->multicast_last_member_interval;
 
 	mldq->mld_type = ICMPV6_MGM_QUERY;
 	mldq->mld_code = 0;

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Gao feng <[email protected]>

[ Upstream commit a881ae1f625c599b460cc8f8a7fcb1c438f699ad ]

If we disable all of the net interfaces, and enable un-lo interface before lo interface, we already allocated the addrconf dst in ipv6_add_addr. So we shouldn't allocate it again when we enable lo interface.

Otherwise the message below will be triggered.
unregister_netdevice: waiting for sit1 to become free. Usage count = 1

This problem is introduced by commit 25fb6ca4ed9cad72f14f61629b68dc03c0d9713f "net IPv6 : Fix broken IPv6 routing table after loopback down-up"

---
 net/ipv6/addrconf.c |    3 +++
 1 file changed, 3 insertions(+)

@@ -2357,6 +2357,9 @@ static void init_loopback(struct net_dev
 			if (sp_ifa->flags & (IFA_F_DADFAILED | IFA_F_TENTATIVE))
 				continue;
 
+			if (sp_ifa->rt)
+				continue;
+
 			sp_rt = addrconf_dst_alloc(idev, &sp_ifa->addr, 0);
 
 			/* Failure cases are ignored */

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <[email protected]>

[ Upstream commit a963a37d384d71ad43b3e9e79d68d42fbe0901f3 ]

It's possible to use AF_INET6 sockets and to connect to an IPv4 destination. After this, socket dst cache is a pointer to a rtable, not rt6_info.

ip6_sk_dst_check() should check the socket dst cache is IPv6, or else various corruptions/crashes can happen.

Dave Jones can reproduce immediate crash with
trinity -q -l off -n -c sendmsg -c connect

With help from Hannes Frederic Sowa

---
 net/ipv6/ip6_output.c |    8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

@@ -925,11 +925,17 @@ static struct dst_entry *ip6_sk_dst_chec
 					  const struct flowi6 *fl6)
 {
 	struct ipv6_pinfo *np = inet6_sk(sk);
-	struct rt6_info *rt = (struct rt6_info *)dst;
+	struct rt6_info *rt;
 
 	if (!dst)
 		goto out;
 
+	if (dst->ops->family != AF_INET6) {
+		dst_release(dst);
+		return NULL;
+	}
+
+	rt = (struct rt6_info *)dst;
 	/* Yes, checking route validity in not connected
 	 * case is not very simple. Take into account,
 	 * that we do not support routing by source, TOS,

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Mathias Krause <[email protected]>

[ Upstream commit a5cc68f3d63306d0d288f31edfc2ae6ef8ecd887 ]

key_notify_sa_flush() and key_notify_policy_flush() miss to initialize the sadb_msg_reserved member of the broadcasted message and thereby leak 2 bytes of heap memory to listeners. Fix that.

---
 net/key/af_key.c |    2 ++
 1 file changed, 2 insertions(+)

@@ -1705,6 +1705,7 @@ static int key_notify_sa_flush(const str
 	hdr->sadb_msg_version = PF_KEY_V2;
 	hdr->sadb_msg_errno = (uint8_t) 0;
 	hdr->sadb_msg_len = (sizeof(struct sadb_msg) / sizeof(uint64_t));
+	hdr->sadb_msg_reserved = 0;
 
 	pfkey_broadcast(skb, GFP_ATOMIC, BROADCAST_ALL, NULL, c->net);
 

@@ -2686,6 +2687,7 @@ static int key_notify_policy_flush(const
 	hdr->sadb_msg_version = PF_KEY_V2;
 	hdr->sadb_msg_errno = (uint8_t) 0;
 	hdr->sadb_msg_len = (sizeof(struct sadb_msg) / sizeof(uint64_t));
+	hdr->sadb_msg_reserved = 0;
 	pfkey_broadcast(skb_out, GFP_ATOMIC, BROADCAST_ALL, NULL, c->net);
 	return 0;
 

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <[email protected]>

[ Upstream commit c9ab4d85de222f3390c67aedc9c18a50e767531e ]

There is a race in neighbour code, because neigh_destroy() uses skb_queue_purge(&neigh->arp_queue) without holding neighbour lock, while other parts of the code assume neighbour rwlock is what protects arp_queue

Convert all skb_queue_purge() calls to the __skb_queue_purge() variant

Use __skb_queue_head_init() instead of skb_queue_head_init() to make clear we do not use arp_queue.lock

And hold neigh->lock in neigh_destroy() to close the race.

---
 net/core/neighbour.c |   12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

@@ -237,7 +237,7 @@ static void neigh_flush_dev(struct neigh
 				   we must kill timers etc. and move
 				   it to safe state.
 				 */
-				skb_queue_purge(&n->arp_queue);
+				__skb_queue_purge(&n->arp_queue);
 				n->output = neigh_blackhole;
 				if (n->nud_state & NUD_VALID)
 					n->nud_state = NUD_NOARP;

@@ -291,7 +291,7 @@ static struct neighbour *neigh_alloc(str
 	if (!n)
 		goto out_entries;
 
-	skb_queue_head_init(&n->arp_queue);
+	__skb_queue_head_init(&n->arp_queue);
 	rwlock_init(&n->lock);
 	seqlock_init(&n->ha_lock);
 	n->updated	  = n->used = now;

@@ -712,7 +712,9 @@ void neigh_destroy(struct neighbour *nei
 		hh_cache_put(hh);
 	}
 
-	skb_queue_purge(&neigh->arp_queue);
+	write_lock_bh(&neigh->lock);
+	__skb_queue_purge(&neigh->arp_queue);
+	write_unlock_bh(&neigh->lock);
 
 	dev_put(neigh->dev);
 	neigh_parms_put(neigh->parms);

@@ -864,7 +866,7 @@ static void neigh_invalidate(struct neig
 		neigh->ops->error_report(neigh, skb);
 		write_lock(&neigh->lock);
 	}
-	skb_queue_purge(&neigh->arp_queue);
+	__skb_queue_purge(&neigh->arp_queue);
 }
 
 /* Called when a timer expires for a neighbour entry. */

@@ -1188,7 +1190,7 @@ int neigh_update(struct neighbour *neigh
 
 			write_lock_bh(&neigh->lock);
 		}
-		skb_queue_purge(&neigh->arp_queue);
+		__skb_queue_purge(&neigh->arp_queue);
 	}
 out:
 	if (update_isrouter) {

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Dave Jones <[email protected]>

[ Upstream commit 4ccb93ce7439b63c31bc7597bfffd13567fa483d ]

Two of the x25 ioctl cases have error paths that break out of the function without unlocking the socket, leading to this warning:

================================================
[ BUG: lock held when returning to user space! ]
3.10.0-rc7+ #36 Not tainted
------------------------------------------------
trinity-child2/31407 is leaving the kernel with locks still held!
1 lock held by trinity-child2/31407:
#0: (sk_lock-AF_X25){+.+.+.}, at: [<ffffffffa024b6da>] x25_ioctl+0x8a/0x740 [x25]

---
 net/x25/af_x25.c |   15 ++++++++-------
 1 file changed, 8 insertions(+), 7 deletions(-)

@@ -1584,11 +1584,11 @@ out_cud_release:
 		case SIOCX25CALLACCPTAPPRV: {
 			rc = -EINVAL;
 			lock_sock(sk);
-			if (sk->sk_state != TCP_CLOSE)
-				break;
-			clear_bit(X25_ACCPT_APPRV_FLAG, &x25->flags);
+			if (sk->sk_state == TCP_CLOSE) {
+				clear_bit(X25_ACCPT_APPRV_FLAG, &x25->flags);
+				rc = 0;
+			}
 			release_sock(sk);
-			rc = 0;
 			break;
 		}
 

@@ -1596,14 +1596,15 @@ out_cud_release:
 			rc = -EINVAL;
 			lock_sock(sk);
 			if (sk->sk_state != TCP_ESTABLISHED)
-				break;
+				goto out_sendcallaccpt_release;
 			/* must call accptapprv above */
 			if (test_bit(X25_ACCPT_APPRV_FLAG, &x25->flags))
-				break;
+				goto out_sendcallaccpt_release;
 			x25_write_internal(sk, X25_CALL_ACCEPTED);
 			x25->state = X25_STATE_3;
-			release_sock(sk);
 			rc = 0;
+out_sendcallaccpt_release:
+			release_sock(sk);
 			break;
 		}
 

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Changli Gao <[email protected]>

[ Upstream commit b1a5a34bd0b8767ea689e68f8ea513e9710b671e ]

Ver and type in pppoe_hdr should be swapped as defined by RFC2516 section-4.

---
 include/linux/if_pppox.h |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

@@ -127,11 +127,11 @@ struct pppoe_tag {
 
 struct pppoe_hdr {
 #if defined(__LITTLE_ENDIAN_BITFIELD)
-	__u8 ver : 4;
 	__u8 type : 4;
+	__u8 ver : 4;
 #elif defined(__BIG_ENDIAN_BITFIELD)
-	__u8 type : 4;
 	__u8 ver : 4;
+	__u8 type : 4;
 #else
 #error	"Please fix <asm/byteorder.h>"
 #endif

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Amerigo Wang <[email protected]>

[ Upstream commit 8965779d2c0e6ab246c82a405236b1fb2adae6b2, with
some bits from commit b7b1bfce0bb68bd8f6e62a28295922785cc63781 ("ipv6: split duplicate address detection and router solicitation timer") to get the __ipv6_get_lladdr() used by this patch. ]

dingtianhong reported the following deadlock detected by lockdep:

======================================================
[ INFO: possible circular locking dependency detected ] 3.4.24.05-0.1-default #1 Not tainted
-------------------------------------------------------
ksoftirqd/0/3 is trying to acquire lock:
(&ndev->lock){+.+...}, at: [<ffffffff8147f804>] ipv6_get_lladdr+0x74/0x120

but task is already holding lock:
(&mc->mca_lock){+.+...}, at: [<ffffffff8149d130>] mld_send_report+0x40/0x150

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #1 (&mc->mca_lock){+.+...}:

        [<ffffffff810a8027>] validate_chain+0x637/0x730
        [<ffffffff810a8417>] __lock_acquire+0x2f7/0x500
        [<ffffffff810a8734>] lock_acquire+0x114/0x150
        [<ffffffff814f691a>] rt_spin_lock+0x4a/0x60
        [<ffffffff8149e4bb>] igmp6_group_added+0x3b/0x120
        [<ffffffff8149e5d8>] ipv6_mc_up+0x38/0x60
        [<ffffffff81480a4d>] ipv6_find_idev+0x3d/0x80
        [<ffffffff81483175>] addrconf_notify+0x3d5/0x4b0
        [<ffffffff814fae3f>] notifier_call_chain+0x3f/0x80
        [<ffffffff81073471>] raw_notifier_call_chain+0x11/0x20
        [<ffffffff813d8722>] call_netdevice_notifiers+0x32/0x60
        [<ffffffff813d92d4>] __dev_notify_flags+0x34/0x80
        [<ffffffff813d9360>] dev_change_flags+0x40/0x70
        [<ffffffff813ea627>] do_setlink+0x237/0x8a0
        [<ffffffff813ebb6c>] rtnl_newlink+0x3ec/0x600
        [<ffffffff813eb4d0>] rtnetlink_rcv_msg+0x160/0x310
        [<ffffffff814040b9>] netlink_rcv_skb+0x89/0xb0
        [<ffffffff813eb357>] rtnetlink_rcv+0x27/0x40
        [<ffffffff81403e20>] netlink_unicast+0x140/0x180
        [<ffffffff81404a9e>] netlink_sendmsg+0x33e/0x380
        [<ffffffff813c4252>] sock_sendmsg+0x112/0x130
        [<ffffffff813c537e>] __sys_sendmsg+0x44e/0x460
        [<ffffffff813c5544>] sys_sendmsg+0x44/0x70
        [<ffffffff814feab9>] system_call_fastpath+0x16/0x1b

-> #0 (&ndev->lock){+.+...}:

        [<ffffffff810a798e>] check_prev_add+0x3de/0x440
        [<ffffffff810a8027>] validate_chain+0x637/0x730
        [<ffffffff810a8417>] __lock_acquire+0x2f7/0x500
        [<ffffffff810a8734>] lock_acquire+0x114/0x150
        [<ffffffff814f6c82>] rt_read_lock+0x42/0x60
        [<ffffffff8147f804>] ipv6_get_lladdr+0x74/0x120
        [<ffffffff8149b036>] mld_newpack+0xb6/0x160
        [<ffffffff8149b18b>] add_grhead+0xab/0xc0
        [<ffffffff8149d03b>] add_grec+0x3ab/0x460
        [<ffffffff8149d14a>] mld_send_report+0x5a/0x150
        [<ffffffff8149f99e>] igmp6_timer_handler+0x4e/0xb0
        [<ffffffff8105705a>] call_timer_fn+0xca/0x1d0
        [<ffffffff81057b9f>] run_timer_softirq+0x1df/0x2e0
        [<ffffffff8104e8c7>] handle_pending_softirqs+0xf7/0x1f0
        [<ffffffff8104ea3b>] __do_softirq_common+0x7b/0xf0
        [<ffffffff8104f07f>] __thread_do_softirq+0x1af/0x210
        [<ffffffff8104f1c1>] run_ksoftirqd+0xe1/0x1f0
        [<ffffffff8106c7de>] kthread+0xae/0xc0
        [<ffffffff814fff74>] kernel_thread_helper+0x4/0x10

actually we can just hold idev->lock before taking pmc->mca_lock, and avoid taking idev->lock again when iterating idev->addr_list, since the upper callers of mld_newpack() already take read_lock_bh(&idev->lock).

---
 include/net/addrconf.h |    3 +++
 net/ipv6/addrconf.c    |   28 ++++++++++++++++++----------
 net/ipv6/mcast.c       |   18 ++++++++++--------
 3 files changed, 31 insertions(+), 18 deletions(-)

@@ -81,6 +81,9 @@ extern int			ipv6_dev_get_saddr(struct n
 					       const struct in6_addr *daddr,
 					       unsigned int srcprefs,
 					       struct in6_addr *saddr);
+extern int			__ipv6_get_lladdr(struct inet6_dev *idev,
+						  struct in6_addr *addr,
+						  unsigned char banned_flags);
 extern int			ipv6_get_lladdr(struct net_device *dev,
 						struct in6_addr *addr,
 						unsigned char banned_flags);

@@ -1235,6 +1235,23 @@ try_nextdev:
 }
 EXPORT_SYMBOL(ipv6_dev_get_saddr);
 
+int __ipv6_get_lladdr(struct inet6_dev *idev, struct in6_addr *addr,
+		      unsigned char banned_flags)
+{
+	struct inet6_ifaddr *ifp;
+	int err = -EADDRNOTAVAIL;
+
+	list_for_each_entry(ifp, &idev->addr_list, if_list) {
+		if (ifp->scope == IFA_LINK &&
+		    !(ifp->flags & banned_flags)) {
+			ipv6_addr_copy(addr, &ifp->addr);
+			err = 0;
+			break;
+		}
+	}
+	return err;
+}
+
 int ipv6_get_lladdr(struct net_device *dev, struct in6_addr *addr,
 		    unsigned char banned_flags)
 {

@@ -1244,17 +1261,8 @@ int ipv6_get_lladdr(struct net_device *d
 	rcu_read_lock();
 	idev = __in6_dev_get(dev);
 	if (idev) {
-		struct inet6_ifaddr *ifp;
-
 		read_lock_bh(&idev->lock);
-		list_for_each_entry(ifp, &idev->addr_list, if_list) {
-			if (ifp->scope == IFA_LINK &&
-			    !(ifp->flags & banned_flags)) {
-				ipv6_addr_copy(addr, &ifp->addr);
-				err = 0;
-				break;
-			}
-		}
+		err = __ipv6_get_lladdr(idev, addr, banned_flags);
 		read_unlock_bh(&idev->lock);
 	}
 	rcu_read_unlock();

@@ -1334,8 +1334,9 @@ mld_scount(struct ifmcaddr6 *pmc, int ty
 	return scount;
 }
 
-static struct sk_buff *mld_newpack(struct net_device *dev, int size)
+static struct sk_buff *mld_newpack(struct inet6_dev *idev, int size)
 {
+	struct net_device *dev = idev->dev;
 	struct net *net = dev_net(dev);
 	struct sock *sk = net->ipv6.igmp_sk;
 	struct sk_buff *skb;

@@ -1358,7 +1359,7 @@ static struct sk_buff *mld_newpack(struc
 
 	skb_reserve(skb, LL_RESERVED_SPACE(dev));
 
-	if (ipv6_get_lladdr(dev, &addr_buf, IFA_F_TENTATIVE)) {
+	if (__ipv6_get_lladdr(idev, &addr_buf, IFA_F_TENTATIVE)) {
 		/* <draft-ietf-magma-mld-source-05.txt>:
 		 * use unspecified address as the source address
 		 * when a valid link-local address is not available.

@@ -1461,7 +1462,7 @@ static struct sk_buff *add_grhead(struct
 	struct mld2_grec *pgr;
 
 	if (!skb)
-		skb = mld_newpack(dev, dev->mtu);
+		skb = mld_newpack(pmc->idev, dev->mtu);
 	if (!skb)
 		return NULL;
 	pgr = (struct mld2_grec *)skb_put(skb, sizeof(struct mld2_grec));

@@ -1481,7 +1482,8 @@ static struct sk_buff *add_grhead(struct
 static struct sk_buff *add_grec(struct sk_buff *skb, struct ifmcaddr6 *pmc,
 	int type, int gdeleted, int sdeleted)
 {
-	struct net_device *dev = pmc->idev->dev;
+	struct inet6_dev *idev = pmc->idev;
+	struct net_device *dev = idev->dev;
 	struct mld2_report *pmr;
 	struct mld2_grec *pgr = NULL;
 	struct ip6_sf_list *psf, *psf_next, *psf_prev, **psf_list;

@@ -1510,7 +1512,7 @@ static struct sk_buff *add_grec(struct s
 		    AVAILABLE(skb) < grec_size(pmc, type, gdeleted, sdeleted)) {
 			if (skb)
 				mld_sendpack(skb);
-			skb = mld_newpack(dev, dev->mtu);
+			skb = mld_newpack(idev, dev->mtu);
 		}
 	}
 	first = 1;

@@ -1537,7 +1539,7 @@ static struct sk_buff *add_grec(struct s
 				pgr->grec_nsrcs = htons(scount);
 			if (skb)
 				mld_sendpack(skb);
-			skb = mld_newpack(dev, dev->mtu);
+			skb = mld_newpack(idev, dev->mtu);
 			first = 1;
 			scount = 0;
 		}

@@ -1592,8 +1594,8 @@ static void mld_send_report(struct inet6
 	struct sk_buff *skb = NULL;
 	int type;
 
+	read_lock_bh(&idev->lock);
 	if (!pmc) {
-		read_lock_bh(&idev->lock);
 		for (pmc=idev->mc_list; pmc; pmc=pmc->next) {
 			if (pmc->mca_flags & MAF_NOREPORT)
 				continue;

@@ -1605,7 +1607,6 @@ static void mld_send_report(struct inet6
 			skb = add_grec(skb, pmc, type, 0, 0);
 			spin_unlock_bh(&pmc->mca_lock);
 		}
-		read_unlock_bh(&idev->lock);
 	} else {
 		spin_lock_bh(&pmc->mca_lock);
 		if (pmc->mca_sfcount[MCAST_EXCLUDE])

@@ -1615,6 +1616,7 @@ static void mld_send_report(struct inet6
 		skb = add_grec(skb, pmc, type, 0, 0);
 		spin_unlock_bh(&pmc->mca_lock);
 	}
+	read_unlock_bh(&idev->lock);
 	if (skb)
 		mld_sendpack(skb);
 }

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Wei Yongjun <[email protected]>

[ Upstream commit e1558a93b61962710733dc8c11a2bc765607f1cd ]

Add missing .owner of struct pppox_proto. This prevents the module from being removed from underneath its users.

---
 net/l2tp/l2tp_ppp.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

@@ -1771,7 +1771,8 @@ static const struct proto_ops pppol2tp_o
 
 static const struct pppox_proto pppol2tp_proto = {
 	.create		= pppol2tp_create,
-	.ioctl		= pppol2tp_ioctl
+	.ioctl		= pppol2tp_ioctl,
+	.owner		= THIS_MODULE,
 };
 
 #ifdef CONFIG_L2TP_V3

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Hannes Frederic Sowa <[email protected]>

[ Upstream commit 8822b64a0fa64a5dd1dfcf837c5b0be83f8c05d1 ]

We accidentally call down to ip6_push_pending_frames when uncorking pending AF_INET data on a ipv6 socket. This results in the following splat (from Dave Jones):

skbuff: skb_under_panic: text:ffffffff816765f6 len:48 put:40 head:ffff88013deb6df0 data:ffff88013deb6dec tail:0x2c end:0xc0 dev:<NULL>

------------[ cut here ]------------
kernel BUG at net/core/skbuff.c:126!
invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
Modules linked in: dccp_ipv4 dccp 8021q garp bridge stp dlci mpoa snd_seq_dummy sctp fuse hidp tun bnep nfnetlink scsi_transport_iscsi rfcomm can_raw can_bcm af_802154 appletalk caif_socket can caif ipt_ULOG x25 rose af_key pppoe pppox ipx phonet irda llc2 ppp_generic slhc p8023 psnap p8022 llc crc_ccitt atm bluetooth
+netrom ax25 nfc rfkill rds af_rxrpc coretemp hwmon kvm_intel kvm crc32c_intel snd_hda_codec_realtek ghash_clmulni_intel microcode pcspkr snd_hda_codec_hdmi snd_hda_intel snd_hda_codec snd_hwdep usb_debug snd_seq snd_seq_device snd_pcm e1000e snd_page_alloc snd_timer ptp snd pps_core soundcore xfs libcrc32c
CPU: 2 PID: 8095 Comm: trinity-child2 Not tainted 3.10.0-rc7+ #37
task: ffff8801f52c2520 ti: ffff8801e6430000 task.ti: ffff8801e6430000
RIP: 0010:[<ffffffff816e759c>]  [<ffffffff816e759c>] skb_panic+0x63/0x65
RSP: 0018:ffff8801e6431de8  EFLAGS: 00010282
RAX: 0000000000000086 RBX: ffff8802353d3cc0 RCX: 0000000000000006
RDX: 0000000000003b90 RSI: ffff8801f52c2ca0 RDI: ffff8801f52c2520
RBP: ffff8801e6431e08 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000001 R12: ffff88022ea0c800
R13: ffff88022ea0cdf8 R14: ffff8802353ecb40 R15: ffffffff81cc7800
FS:  00007f5720a10740(0000) GS:ffff880244c00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000005862000 CR3: 000000022843c000 CR4: 00000000001407e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000600
Stack:
 ffff88013deb6dec 000000000000002c 00000000000000c0 ffffffff81a3f6e4
 ffff8801e6431e18 ffffffff8159a9aa ffff8801e6431e90 ffffffff816765f6
 ffffffff810b756b 0000000700000002 ffff8801e6431e40 0000fea9292aa8c0
Call Trace:
 [<ffffffff8159a9aa>] skb_push+0x3a/0x40
 [<ffffffff816765f6>] ip6_push_pending_frames+0x1f6/0x4d0
 [<ffffffff810b756b>] ? mark_held_locks+0xbb/0x140
 [<ffffffff81694919>] udp_v6_push_pending_frames+0x2b9/0x3d0
 [<ffffffff81694660>] ? udplite_getfrag+0x20/0x20
 [<ffffffff8162092a>] udp_lib_setsockopt+0x1aa/0x1f0
 [<ffffffff811cc5e7>] ? fget_light+0x387/0x4f0
 [<ffffffff816958a4>] udpv6_setsockopt+0x34/0x40
 [<ffffffff815949f4>] sock_common_setsockopt+0x14/0x20
 [<ffffffff81593c31>] SyS_setsockopt+0x71/0xd0
 [<ffffffff816f5d54>] tracesys+0xdd/0xe2
Code: 00 00 48 89 44 24 10 8b 87 d8 00 00 00 48 89 44 24 08 48 8b 87 e8 00 00 00 48 c7 c7 c0 04 aa 81 48 89 04 24 31 c0 e8 e1 7e ff ff <0f> 0b 55 48 89 e5 0f 0b 55 48 89 e5 0f 0b 55 48 89 e5 0f 0b 55
RIP  [<ffffffff816e759c>] skb_panic+0x63/0x65
 RSP <ffff8801e6431de8>

This patch adds a check if the pending data is of address family AF_INET and directly calls udp_push_ending_frames from udp_v6_push_pending_frames if that is the case.

This bug was found by Dave Jones with trinity.

(Also move the initialization of fl6 below the AF_INET check, even if not strictly necessary.)

---
 include/net/udp.h |    1 +
 net/ipv4/udp.c    |    3 ++-
 net/ipv6/udp.c    |    7 ++++++-
 3 files changed, 9 insertions(+), 2 deletions(-)

@@ -180,6 +180,7 @@ extern int udp_get_port(struct sock *sk,
 extern void udp_err(struct sk_buff *, u32);
 extern int udp_sendmsg(struct kiocb *iocb, struct sock *sk,
 			    struct msghdr *msg, size_t len);
+extern int udp_push_pending_frames(struct sock *sk);
 extern void udp_flush_pending_frames(struct sock *sk);
 extern int udp_rcv(struct sk_buff *skb);
 extern int udp_ioctl(struct sock *sk, int cmd, unsigned long arg);

@@ -765,7 +765,7 @@ send:
 /*
  * Push out all pending data as one UDP datagram. Socket is locked.
  */
-static int udp_push_pending_frames(struct sock *sk)
+int udp_push_pending_frames(struct sock *sk)
 {
 	struct udp_sock  *up = udp_sk(sk);
 	struct inet_sock *inet = inet_sk(sk);

@@ -784,6 +784,7 @@ out:
 	up->pending = 0;
 	return err;
 }
+EXPORT_SYMBOL(udp_push_pending_frames);
 
 int udp_sendmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg,
 		size_t len)

@@ -892,11 +892,16 @@ static int udp_v6_push_pending_frames(st
 	struct udphdr *uh;
 	struct udp_sock  *up = udp_sk(sk);
 	struct inet_sock *inet = inet_sk(sk);
-	struct flowi6 *fl6 = &inet->cork.fl.u.ip6;
+	struct flowi6 *fl6;
 	int err = 0;
 	int is_udplite = IS_UDPLITE(sk);
 	__wsum csum = 0;
 
+	if (up->pending == AF_INET)
+		return udp_push_pending_frames(sk);
+
+	fl6 = &inet->cork.fl.u.ip6;
+
 	/* Grab the skbuff where UDP header space exists. */
 	if ((skb = skb_peek(&sk->sk_write_queue)) == NULL)
 		goto out;

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Dave Kleikamp <[email protected]>

[ Upstream commit aabb9875d02559ab9b928cd6f259a5cc4c21a589 ]

The missing call to unregister_netdev() leaves the interface active after the driver is unloaded by rmmod.

---
 drivers/net/sunvnet.c |    2 ++
 1 file changed, 2 insertions(+)

@@ -1248,6 +1248,8 @@ static int vnet_port_remove(struct vio_d
 		dev_set_drvdata(&vdev->dev, NULL);
 
 		kfree(port);
+
+		unregister_netdev(vp->dev);
 	}
 	return 0;
 }

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: dingtianhong <[email protected]>

[ Upstream commit 440d57bc5ff55ec1efb3efc9cbe9420b4bbdfefa ]

According to the commit 16b0dc29c1af9df341428f4c49ada4f626258082 (dummy: fix rcu_sched self-detected stalls)

Eric Dumazet fix the problem in dummy, but the ifb will occur the same problem like the dummy modules.

Trying to "modprobe ifb numifbs=30000" triggers :

INFO: rcu_sched self-detected stall on CPU

After this splat, RTNL is locked and reboot is needed.

We must call cond_resched() to avoid this, even holding RTNL.

---
 drivers/net/ifb.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

@@ -252,8 +252,10 @@ static int __init ifb_init_module(void)
 	rtnl_lock();
 	err = __rtnl_link_register(&ifb_link_ops);
 
-	for (i = 0; i < numifbs && !err; i++)
+	for (i = 0; i < numifbs && !err; i++) {
 		err = ifb_init_one(i);
+		cond_resched();
+	}
 	if (err)
 		__rtnl_link_unregister(&ifb_link_ops);
 	rtnl_unlock();

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: dingtianhong <[email protected]>

[ Upstream commit 2c8a01894a12665d8059fad8f0a293c98a264121 ]

We rename the dummy in modprobe.conf like this:

install dummy0 /sbin/modprobe -o dummy0 --ignore-install dummy install dummy1 /sbin/modprobe -o dummy1 --ignore-install dummy

We got oops when we run the command:

modprobe dummy0
modprobe dummy1

------------[ cut here ]------------

[ 3302.187584] BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
[ 3302.195411] IP: [<ffffffff813fe62a>] __rtnl_link_unregister+0x9a/0xd0
[ 3302.201844] PGD 85c94a067 PUD 8517bd067 PMD 0
[ 3302.206305] Oops: 0002 [#1] SMP
[ 3302.299737] task: ffff88105ccea300 ti: ffff880eba4a0000 task.ti: ffff880eba4a0000
[ 3302.307186] RIP: 0010:[<ffffffff813fe62a>]  [<ffffffff813fe62a>] __rtnl_link_unregister+0x9a/0xd0
[ 3302.316044] RSP: 0018:ffff880eba4a1dd8  EFLAGS: 00010246
[ 3302.321332] RAX: 0000000000000000 RBX: ffffffff81a9d738 RCX: 0000000000000002
[ 3302.328436] RDX: 0000000000000000 RSI: ffffffffa04d602c RDI: ffff880eba4a1dd8
[ 3302.335541] RBP: ffff880eba4a1e18 R08: dead000000200200 R09: dead000000100100
[ 3302.342644] R10: 0000000000000080 R11: 0000000000000003 R12: ffffffff81a9d788
[ 3302.349748] R13: ffffffffa04d7020 R14: ffffffff81a9d670 R15: ffff880eba4a1dd8
[ 3302.364910] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 3302.370630] CR2: 0000000000000008 CR3: 000000085e15e000 CR4: 00000000000427e0
[ 3302.377734] DR0: 0000000000000003 DR1: 00000000000000b0 DR2: 0000000000000001
[ 3302.384838] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 3302.391940] Stack:
[ 3302.393944]  ffff880eba4a1dd8 ffff880eba4a1dd8 ffff880eba4a1e18 ffffffffa04d70c0
[ 3302.401350]  00000000ffffffef ffffffffa01a8000 0000000000000000 ffffffff816111c8
[ 3302.408758]  ffff880eba4a1e48 ffffffffa01a80be ffff880eba4a1e48 ffffffffa04d70c0
[ 3302.416164] Call Trace:
[ 3302.418605]  [<ffffffffa01a8000>] ? 0xffffffffa01a7fff
[ 3302.423727]  [<ffffffffa01a80be>] dummy_init_module+0xbe/0x1000 [dummy0]
[ 3302.430405]  [<ffffffffa01a8000>] ? 0xffffffffa01a7fff
[ 3302.435535]  [<ffffffff81000322>] do_one_initcall+0x152/0x1b0
[ 3302.441263]  [<ffffffff810ab24b>] do_init_module+0x7b/0x200
[ 3302.446824]  [<ffffffff810ad3d2>] load_module+0x4e2/0x530
[ 3302.452215]  [<ffffffff8127ae40>] ? ddebug_dyndbg_boot_param_cb+0x60/0x60
[ 3302.458979]  [<ffffffff810ad5f1>] SyS_init_module+0xd1/0x130
[ 3302.464627]  [<ffffffff814b9652>] system_call_fastpath+0x16/0x1b
[ 3302.490090] RIP  [<ffffffff813fe62a>] __rtnl_link_unregister+0x9a/0xd0
[ 3302.496607]  RSP <ffff880eba4a1dd8>
[ 3302.500084] CR2: 0000000000000008
[ 3302.503466] ---[ end trace 8342d49cd49f78ed ]---

The reason is that when loading dummy, if __rtnl_link_register() return failed, the init_module should return and avoid take the wrong path.

---
 drivers/net/dummy.c |    4 ++++
 1 file changed, 4 insertions(+)

@@ -186,6 +186,8 @@ static int __init dummy_init_module(void
 
 	rtnl_lock();
 	err = __rtnl_link_register(&dummy_link_ops);
+	if (err < 0)
+		goto out;
 
 	for (i = 0; i < numdummies && !err; i++) {
 		err = dummy_init_one();

@@ -193,6 +195,8 @@ static int __init dummy_init_module(void
 	}
 	if (err < 0)
 		__rtnl_link_unregister(&dummy_link_ops);
+
+out:
 	rtnl_unlock();
 
 	return err;

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: dingtianhong <[email protected]>

[ Upstream commit f2966cd5691058b8674a20766525bedeaea9cbcf ]

If __rtnl_link_register() return faild when loading the ifb, it will take the wrong path and get oops, so fix it just like dummy.

---
 drivers/net/ifb.c |    4 ++++
 1 file changed, 4 insertions(+)

@@ -251,6 +251,8 @@ static int __init ifb_init_module(void)
 
 	rtnl_lock();
 	err = __rtnl_link_register(&ifb_link_ops);
+	if (err < 0)
+		goto out;
 
 	for (i = 0; i < numifbs && !err; i++) {
 		err = ifb_init_one(i);

@@ -258,6 +260,8 @@ static int __init ifb_init_module(void)
 	}
 	if (err)
 		__rtnl_link_unregister(&ifb_link_ops);
+
+out:
 	rtnl_unlock();
 
 	return err;

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <[email protected]>

[ Upstream commit 3e3aac497513c669e1c62c71e1d552ea85c1d974 ]

egress_priority_map[] hash table updates are protected by rtnl, and we never remove elements until device is dismantled.

We have to make sure that before inserting an new element in hash table, all its fields are committed to memory or else another cpu could find corrupt values and crash.

---
 net/8021q/vlan_dev.c |    7 +++++++
 1 file changed, 7 insertions(+)

@@ -70,6 +70,8 @@ vlan_dev_get_egress_qos_mask(struct net_
 {
 	struct vlan_priority_tci_mapping *mp;
 
+	smp_rmb(); /* coupled with smp_wmb() in vlan_dev_set_egress_priority() */
+
 	mp = vlan_dev_info(dev)->egress_priority_map[(skb->priority & 0xF)];
 	while (mp) {
 		if (mp->priority == skb->priority) {

@@ -230,6 +232,11 @@ int vlan_dev_set_egress_priority(const s
 	np->next = mp;
 	np->priority = skb_prio;
 	np->vlan_qos = vlan_qos;
+	/* Before inserting this element in hash table, make sure all its fields
+	 * are committed to memory.
+	 * coupled with smp_rmb() in vlan_dev_get_egress_qos_mask()
+	 */
+	smp_wmb();
 	vlan->egress_priority_map[skb_prio & 0xF] = np;
 	if (vlan_qos)
 		vlan->nr_egress_mappings++;

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jan Kara <[email protected]>

commit a5faeaf9109578e65e1a32e2a3e76c8b47e7dcb6 upstream.

Code in blkdev.c moves a device inode to default_backing_dev_info when the last reference to the device is put and moves the device inode back to its bdi when the first reference is acquired. This includes moving to wb.b_dirty list if the device inode is dirty. The code however doesn't setup timer to wake corresponding flusher thread and while wb.b_dirty list is non-empty __mark_inode_dirty() will not set it up either. Thus periodic writeback is effectively disabled until a sync(2) call which can lead to unexpected data loss in case of crash or power failure.

Fix the problem by setting up a timer for periodic writeback in case we add the first dirty inode to wb.b_dirty list in bdev_inode_switch_bdi().

---
 fs/block_dev.c |   10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

@@ -55,13 +55,21 @@ EXPORT_SYMBOL(I_BDEV);
 static void bdev_inode_switch_bdi(struct inode *inode,
 			struct backing_dev_info *dst)
 {
+	bool wakeup_bdi = false;
+
 	spin_lock(&inode_wb_list_lock);
 	spin_lock(&inode->i_lock);
 	inode->i_data.backing_dev_info = dst;
-	if (inode->i_state & I_DIRTY)
+	if (inode->i_state & I_DIRTY) {
+		if (bdi_cap_writeback_dirty(dst) && !wb_has_dirty_io(&dst->wb))
+			wakeup_bdi = true;
 		list_move(&inode->i_wb_list, &dst->wb.b_dirty);
+	}
 	spin_unlock(&inode->i_lock);
 	spin_unlock(&inode_wb_list_lock);
+
+	if (wakeup_bdi)
+		bdi_wakeup_thread_delayed(dst);
 }
 
 sector_t blkdev_max_block(struct block_device *bdev)

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Bjørn Mork <[email protected]>

commit 7a6a731bd00ca90d0e250867c3b9c05b5ff0fa49 upstream.

commit 98cb7e44 ([SCSI] megaraid_sas: Sanity check user supplied length before passing it to dma_alloc_coherent()) introduced a memory leak. Memory allocated for entries following zero length SGL entries will not be freed.

Reference: http://bugs.debian.org/688198

---
 drivers/scsi/megaraid/megaraid_sas_base.c |   10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

@@ -4746,10 +4746,12 @@ megasas_mgmt_fw_ioctl(struct megasas_ins
 				    sense, sense_handle);
 	}
 
-	for (i = 0; i < ioc->sge_count && kbuff_arr[i]; i++) {
-		dma_free_coherent(&instance->pdev->dev,
-				    kern_sge32[i].length,
-				    kbuff_arr[i], kern_sge32[i].phys_addr);
+	for (i = 0; i < ioc->sge_count; i++) {
+		if (kbuff_arr[i])
+			dma_free_coherent(&instance->pdev->dev,
+					  kern_sge32[i].length,
+					  kbuff_arr[i],
+					  kern_sge32[i].phys_addr);
 	}
 
 	megasas_return_cmd(instance, cmd);

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Andi Kleen <[email protected]>

commit 16da05b1158d1bcb31656e636a8736a663b1cf1f upstream.

gcc 4.8 warns because the memset only clears sizeof(char *) bytes, not the whole buffer. Use the correct buffer size and clear the whole sense buffer.

/backup/lsrc/git/linux-lto-2.6/drivers/scsi/bnx2fc/bnx2fc_io.c: In function 'bnx2fc_parse_fcp_rsp':
/backup/lsrc/git/linux-lto-2.6/drivers/scsi/bnx2fc/bnx2fc_io.c:1810:41:
warning: argument to 'sizeof' in 'memset' call is the same expression as the destination; did you mean to provide an explicit length? [-Wsizeof-pointer-memaccess]

   memset(sc_cmd->sense_buffer, 0, sizeof(sc_cmd->sense_buffer));
                                         ^

---
 drivers/scsi/bnx2fc/bnx2fc_io.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -1618,7 +1618,7 @@ static void bnx2fc_parse_fcp_rsp(struct
 			fcp_sns_len = SCSI_SENSE_BUFFERSIZE;
 		}
 
-		memset(sc_cmd->sense_buffer, 0, sizeof(sc_cmd->sense_buffer));
+		memset(sc_cmd->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE);
 		if (fcp_sns_len)
 			memcpy(sc_cmd->sense_buffer, rq_data, fcp_sns_len);
 

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Enrico Mioso <[email protected]>

commit 3d1a69e726406ab662ab88fa30a3a05ed404334d upstream.

Prevent the option driver from binding itself to the QMI/WWAN interface, making it unusable by the proper driver.

---
 drivers/usb/serial/option.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

@@ -832,7 +832,8 @@ static const struct usb_device_id option
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0017, 0xff, 0xff, 0xff),
 		.driver_info = (kernel_ulong_t)&net_intf3_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0018, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0019, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0019, 0xff, 0xff, 0xff),
+		.driver_info = (kernel_ulong_t)&net_intf3_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0020, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0021, 0xff, 0xff, 0xff),
 		.driver_info = (kernel_ulong_t)&net_intf4_blacklist },

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Bjørn Mork <[email protected]>

commit 94190301ffa059c2d127b3a67ec5d161d5c62681 upstream.

---
 drivers/usb/serial/option.c |    2 ++
 1 file changed, 2 insertions(+)

@@ -1355,6 +1355,8 @@ static const struct usb_device_id option
 	{ USB_DEVICE(PETATEL_VENDOR_ID, PETATEL_PRODUCT_NP10T) },
 	{ USB_DEVICE(TPLINK_VENDOR_ID, TPLINK_PRODUCT_MA180),
 	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	{ USB_DEVICE(TPLINK_VENDOR_ID, 0x9000),					/* TP-Link MA260 */
+	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
 	{ USB_DEVICE(CHANGHONG_VENDOR_ID, CHANGHONG_PRODUCT_CH690) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x7d01, 0xff, 0x02, 0x01) },	/* D-Link DWM-156 (variant) */
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x7d01, 0xff, 0x00, 0x00) },	/* D-Link DWM-156 (variant) */

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Dan Williams <[email protected]>

commit 4cf76df06ecc852633ed927d91e01c83c33bc331 upstream.

Speaks AT on interfaces 5 (command & PPP) and 3 (secondary), other interface protocols are unknown.

---
 drivers/usb/serial/option.c |    2 ++
 1 file changed, 2 insertions(+)

@@ -347,6 +347,7 @@ static void option_instat_callback(struc
 #define OLIVETTI_VENDOR_ID			0x0b3c
 #define OLIVETTI_PRODUCT_OLICARD100		0xc000
 #define OLIVETTI_PRODUCT_OLICARD145		0xc003
+#define OLIVETTI_PRODUCT_OLICARD200		0xc005
 
 /* Celot products */
 #define CELOT_VENDOR_ID				0x211f

@@ -1279,6 +1280,7 @@ static const struct usb_device_id option
 
 	{ USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD100) },
 	{ USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD145) },
+	{ USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD200) },
 	{ USB_DEVICE(CELOT_VENDOR_ID, CELOT_PRODUCT_CT680M) }, /* CT-650 CDMA 450 1xEVDO modem */
 	{ USB_DEVICE(ONDA_VENDOR_ID, ONDA_MT825UP) }, /* ONDA MT825UP modem */
 	{ USB_DEVICE_AND_INTERFACE_INFO(SAMSUNG_VENDOR_ID, SAMSUNG_PRODUCT_GT_B3730, USB_CLASS_CDC_DATA, 0x00, 0x00) }, /* Samsung GT-B3730 LTE USB modem.*/

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Enrico Mioso <[email protected]>

commit 878c69aae986ae97084458c0183a8c0a059865b1 upstream.

Some (very few) early devices like mine, where not exposting a proper CDC descriptor. This was fixed with an immediate firmware update from the vendor, and pre-installed on newer devices.
So actual devices can be driven by cdc_acm.c + cdc_ether.c.

---
 drivers/usb/serial/option.c |    7 -------
 1 file changed, 7 deletions(-)

@@ -353,12 +353,6 @@ static void option_instat_callback(struc
 #define CELOT_VENDOR_ID				0x211f
 #define CELOT_PRODUCT_CT680M			0x6801
 
-/* ONDA Communication vendor id */
-#define ONDA_VENDOR_ID       0x1ee8
-
-/* ONDA MT825UP HSDPA 14.2 modem */
-#define ONDA_MT825UP         0x000b
-
 /* Samsung products */
 #define SAMSUNG_VENDOR_ID                       0x04e8
 #define SAMSUNG_PRODUCT_GT_B3730                0x6889

@@ -1282,7 +1276,6 @@ static const struct usb_device_id option
 	{ USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD145) },
 	{ USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD200) },
 	{ USB_DEVICE(CELOT_VENDOR_ID, CELOT_PRODUCT_CT680M) }, /* CT-650 CDMA 450 1xEVDO modem */
-	{ USB_DEVICE(ONDA_VENDOR_ID, ONDA_MT825UP) }, /* ONDA MT825UP modem */
 	{ USB_DEVICE_AND_INTERFACE_INFO(SAMSUNG_VENDOR_ID, SAMSUNG_PRODUCT_GT_B3730, USB_CLASS_CDC_DATA, 0x00, 0x00) }, /* Samsung GT-B3730 LTE USB modem.*/
 	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEM600) },
 	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEM610) },

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Daniil Bolsun <[email protected]>

commit c38e83b6cc2adf80e3f091fd92cfbeacc9748347 upstream.

This patch was tested on 3.10.1 kernel.

Same models of Petatel NP10T modems have different device IDs. Unfortunately they have no additional revision information on a board which may treat them as different devices. Currently I've seen only two NP10T devices with various IDs. Possibly Petatel NP10T list will be appended upon devices with new IDs will appear.

---
 drivers/usb/serial/option.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

@@ -445,7 +445,8 @@ static void option_instat_callback(struc
 
 /* Hyundai Petatel Inc. products */
 #define PETATEL_VENDOR_ID			0x1ff4
-#define PETATEL_PRODUCT_NP10T			0x600e
+#define PETATEL_PRODUCT_NP10T_600A		0x600a
+#define PETATEL_PRODUCT_NP10T_600E		0x600e
 
 /* TP-LINK Incorporated products */
 #define TPLINK_VENDOR_ID			0x2357

@@ -1347,7 +1348,8 @@ static const struct usb_device_id option
 	{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_4COM2, 0xff, 0x02, 0x01) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_4COM2, 0xff, 0x00, 0x00) },
 	{ USB_DEVICE(CELLIENT_VENDOR_ID, CELLIENT_PRODUCT_MEN200) },
-	{ USB_DEVICE(PETATEL_VENDOR_ID, PETATEL_PRODUCT_NP10T) },
+	{ USB_DEVICE(PETATEL_VENDOR_ID, PETATEL_PRODUCT_NP10T_600A) },
+	{ USB_DEVICE(PETATEL_VENDOR_ID, PETATEL_PRODUCT_NP10T_600E) },
 	{ USB_DEVICE(TPLINK_VENDOR_ID, TPLINK_PRODUCT_MA180),
 	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
 	{ USB_DEVICE(TPLINK_VENDOR_ID, 0x9000),					/* TP-Link MA260 */

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: "Alexandr \\\"Sky\\\" Ivanov" <[email protected]>

commit ca24763588844b14f019ffc45c7df6d9e8f932c5 upstream.

Adding support for D-Link DWM-152/C1 and DWM-156/C1 devices.

DWM-152/C1:

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  6 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=07d1 ProdID=3e01 Rev= 0.00
S:  Product=USB Configuration
S:  SerialNumber=1234567890ABCDEF
C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=81(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

DWM-156/C1:

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  8 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=07d1 ProdID=3e02 Rev= 0.00
S:  Product=DataCard Device
S:  SerialNumber=1234567890ABCDEF
C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=81(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

---
 drivers/usb/serial/option.c |    2 ++
 1 file changed, 2 insertions(+)

@@ -1361,6 +1361,8 @@ static const struct usb_device_id option
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x7d02, 0xff, 0x00, 0x00) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x7d03, 0xff, 0x02, 0x01) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x7d03, 0xff, 0x00, 0x00) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e01, 0xff, 0xff, 0xff) }, /* D-Link DWM-152/C1 */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e02, 0xff, 0xff, 0xff) }, /* D-Link DWM-156/C1 */
 	{ } /* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, option_ids);

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Enrico Mioso <[email protected]>

commit 63b5df963f52ccbab6fabedf05b7ac6b465789a4 upstream.

This patch adds support for the ONYX 3G device (version 1) from ALFA NETWORK.

---
 drivers/usb/serial/option.c |    1 +
 1 file changed, 1 insertion(+)

@@ -793,6 +793,7 @@ static const struct usb_device_id option
 	{ USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC680) },
 	{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6000)}, /* ZTE AC8700 */
 	{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6613)}, /* Onda H600/ZTE MF330 */
+	{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x0023)}, /* ONYX 3G device */
 	{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x9000)}, /* SIMCom SIM5218 */
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6280) }, /* BP3-USB & BP3-EXT HSDPA */
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6008) },

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Luiz Angelo Daros de Luca <[email protected]>

commit 90625070c4253377025878c4e82feed8b35c7116 upstream.

This adds NetGear Managed Switch M4100 series, M5300 series, M7100 series USB ID (0846:0110) to the cp210x driver. Without this, the serial adapter is not recognized in Linux. Description was obtained from an Netgear Eng.

---
 drivers/usb/serial/cp210x.c |    1 +
 1 file changed, 1 insertion(+)

@@ -60,6 +60,7 @@ static const struct usb_device_id id_tab
 	{ USB_DEVICE(0x0489, 0xE000) }, /* Pirelli Broadband S.p.A, DP-L10 SIP/GSM Mobile */
 	{ USB_DEVICE(0x0489, 0xE003) }, /* Pirelli Broadband S.p.A, DP-L10 SIP/GSM Mobile */
 	{ USB_DEVICE(0x0745, 0x1000) }, /* CipherLab USB CCD Barcode Scanner 1000 */
+	{ USB_DEVICE(0x0846, 0x1100) }, /* NetGear Managed Switch M4100 series, M5300 series, M7100 series */
 	{ USB_DEVICE(0x08e6, 0x5501) }, /* Gemalto Prox-PU/CU contactless smartcard reader */
 	{ USB_DEVICE(0x08FD, 0x000A) }, /* Digianswer A/S , ZigBee/802.15.4 MAC Device */
 	{ USB_DEVICE(0x0BED, 0x1100) }, /* MEI (TM) Cashflow-SC Bill/Voucher Acceptor */

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Sami Rahman <[email protected]>

commit 7681156982026ebf7eafd7301eb0374d7648d068 upstream.

Added support for MMB Networks and Planet Innovation Ingeni ZigBee USB devices using customized Silicon Labs' CP210x.c USB to UART bridge drivers with PIDs: 88A4, 88A5.

---
 drivers/usb/serial/cp210x.c |    2 ++
 1 file changed, 2 insertions(+)

@@ -125,6 +125,8 @@ static const struct usb_device_id id_tab
 	{ USB_DEVICE(0x10C4, 0x85F8) }, /* Virtenio Preon32 */
 	{ USB_DEVICE(0x10C4, 0x8664) }, /* AC-Services CAN-IF */
 	{ USB_DEVICE(0x10C4, 0x8665) }, /* AC-Services OBD-IF */
+	{ USB_DEVICE(0x10C4, 0x88A4) }, /* MMB Networks ZigBee USB Device */
+	{ USB_DEVICE(0x10C4, 0x88A5) }, /* Planet Innovation Ingeni ZigBee USB Device */
 	{ USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
 	{ USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */
 	{ USB_DEVICE(0x10C4, 0xEA70) }, /* Silicon Labs factory default */

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Barry Grussling <[email protected]>

commit b579fa52f6be0b4157ca9cc5e94d44a2c89a7e95 upstream.

This patch adds support for the Schweitzer Engineering Laboratories C662 USB cable based off the CP210x driver.

---
 drivers/usb/serial/cp210x.c |    1 +
 1 file changed, 1 insertion(+)

@@ -157,6 +157,7 @@ static const struct usb_device_id id_tab
 	{ USB_DEVICE(0x17F4, 0xAAAA) }, /* Wavesense Jazz blood glucose meter */
 	{ USB_DEVICE(0x1843, 0x0200) }, /* Vaisala USB Instrument Cable */
 	{ USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */
+	{ USB_DEVICE(0x1ADB, 0x0001) }, /* Schweitzer Engineering C662 Cable */
 	{ USB_DEVICE(0x1BE3, 0x07A6) }, /* WAGO 750-923 USB Service Cable */
 	{ USB_DEVICE(0x1E29, 0x0102) }, /* Festo CPX-USB */
 	{ USB_DEVICE(0x1E29, 0x0501) }, /* Festo CMSP */

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: David Jeffery <[email protected]>

commit 1c327d962fc420aea046c16215a552710bde8231 upstream.

In nlmsvc_retry_blocked, the check that the list is non-empty and acquiring the pointer of the first entry is unprotected by any lock. This allows a rare race condition when there is only one entry on the list. A function such as nlmsvc_grant_callback() can be called, which will temporarily remove the entry from the list. Between the list_empty() and list_entry(),the list may become empty, causing an invalid pointer to be used as an nlm_block, leading to a possible crash.

This patch adds the nlm_block_lock around these calls to prevent concurrent use of the nlm_blocked list.

This was a regression introduced by f904be9cc77f361d37d71468b13ff3d1a1823dea "lockd: Mostly remove BKL from the server".

---
 fs/lockd/svclock.c |    4 ++++
 1 file changed, 4 insertions(+)

@@ -913,6 +913,7 @@ nlmsvc_retry_blocked(void)
 	unsigned long	timeout = MAX_SCHEDULE_TIMEOUT;
 	struct nlm_block *block;
 
+	spin_lock(&nlm_blocked_lock);
 	while (!list_empty(&nlm_blocked) && !kthread_should_stop()) {
 		block = list_entry(nlm_blocked.next, struct nlm_block, b_list);
 

@@ -922,6 +923,7 @@ nlmsvc_retry_blocked(void)
 			timeout = block->b_when - jiffies;
 			break;
 		}
+		spin_unlock(&nlm_blocked_lock);
 
 		dprintk("nlmsvc_retry_blocked(%p, when=%ld)\n",
 			block, block->b_when);

@@ -931,7 +933,9 @@ nlmsvc_retry_blocked(void)
 			retry_deferred_block(block);
 		} else
 			nlmsvc_grant_blocked(block);
+		spin_lock(&nlm_blocked_lock);
 	}
+	spin_unlock(&nlm_blocked_lock);
 
 	return timeout;
 }

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: "zhangwei(Jovi)" <[email protected]>

commit 11034ae9c20f4057a6127fc965906417978e69b2 upstream.

All syscall tracing irqs-off tags are wrong, the syscall enter entry doesn't disable irqs.

[root@jovi tracing]#echo "syscalls:sys_enter_open" > set_event [root@jovi tracing]# cat trace
# tracer: nop
#
# entries-in-buffer/entries-written: 13/13 #P:2
#
# _-----=> irqs-off
# / _----=> need-resched

 #                            | / _---=> hardirq/softirq
 #                            || / _--=> preempt-depth
 #                            ||| /     delay
 #           TASK-PID   CPU#  ||||    TIMESTAMP  FUNCTION
 #              | |       |   ||||       |         |
       irqbalance-513   [000] d... 56115.496766: sys_open(filename: 804e1a6, flags: 0, mode: 1b6)
       irqbalance-513   [000] d... 56115.497008: sys_open(filename: 804e1bb, flags: 0, mode: 1b6)
         sendmail-771   [000] d... 56115.827982: sys_open(filename: b770e6d1, flags: 0, mode: 1b6)

The reason is syscall tracing doesn't record irq_flags into buffer. The proper display is:

[root@jovi tracing]#echo "syscalls:sys_enter_open" > set_event [root@jovi tracing]# cat trace
# tracer: nop
#
# entries-in-buffer/entries-written: 14/14 #P:2
#
# _-----=> irqs-off
# / _----=> need-resched

 #                            | / _---=> hardirq/softirq
 #                            || / _--=> preempt-depth
 #                            ||| /     delay
 #           TASK-PID   CPU#  ||||    TIMESTAMP  FUNCTION
 #              | |       |   ||||       |         |
       irqbalance-514   [001] ....    46.213921: sys_open(filename: 804e1a6, flags: 0, mode: 1b6)
       irqbalance-514   [001] ....    46.214160: sys_open(filename: 804e1bb, flags: 0, mode: 1b6)
            <...>-920   [001] ....    47.307260: sys_open(filename: 4e82a0c5, flags: 80000, mode: 0)

---
 kernel/trace/trace_syscalls.c |   18 ++++++++++++++----
 1 file changed, 14 insertions(+), 4 deletions(-)

@@ -304,6 +304,8 @@ void ftrace_syscall_enter(void *ignore,
 	struct ring_buffer *buffer;
 	int size;
 	int syscall_nr;
+	unsigned long irq_flags;
+	int pc;
 
 	syscall_nr = syscall_get_nr(current, regs);
 	if (syscall_nr < 0)

@@ -317,8 +319,11 @@ void ftrace_syscall_enter(void *ignore,
 
 	size = sizeof(*entry) + sizeof(unsigned long) * sys_data->nb_args;
 
+	local_save_flags(irq_flags);
+	pc = preempt_count();
+
 	event = trace_current_buffer_lock_reserve(&buffer,
-			sys_data->enter_event->event.type, size, 0, 0);
+			sys_data->enter_event->event.type, size, irq_flags, pc);
 	if (!event)
 		return;
 

@@ -328,7 +333,8 @@ void ftrace_syscall_enter(void *ignore,
 
 	if (!filter_current_check_discard(buffer, sys_data->enter_event,
 					  entry, event))
-		trace_current_buffer_unlock_commit(buffer, event, 0, 0);
+		trace_current_buffer_unlock_commit(buffer, event,
+						   irq_flags, pc);
 }
 
 void ftrace_syscall_exit(void *ignore, struct pt_regs *regs, long ret)

@@ -338,6 +344,8 @@ void ftrace_syscall_exit(void *ignore, s
 	struct ring_buffer_event *event;
 	struct ring_buffer *buffer;
 	int syscall_nr;
+	unsigned long irq_flags;
+	int pc;
 
 	syscall_nr = syscall_get_nr(current, regs);
 	if (syscall_nr < 0)

@@ -350,7 +358,8 @@ void ftrace_syscall_exit(void *ignore, s
 		return;
 
 	event = trace_current_buffer_lock_reserve(&buffer,
-			sys_data->exit_event->event.type, sizeof(*entry), 0, 0);
+			sys_data->exit_event->event.type, sizeof(*entry),
+			irq_flags, pc);
 	if (!event)
 		return;
 

@@ -360,7 +369,8 @@ void ftrace_syscall_exit(void *ignore, s
 
 	if (!filter_current_check_discard(buffer, sys_data->exit_event,
 					  entry, event))
-		trace_current_buffer_unlock_commit(buffer, event, 0, 0);
+		trace_current_buffer_unlock_commit(buffer, event,
+						   irq_flags, pc);
 }
 
 int reg_event_syscall_enter(struct ftrace_event_call *call)

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Thomas Gleixner <[email protected]>

commit 5ec2481b7b47a4005bb446d176e5d0257400c77d upstream.

smp_call_function_* must not be called from softirq context.

But clock_was_set() which calls on_each_cpu() is called from softirq context to implement a delayed clock_was_set() for the timer interrupt handler. Though that almost never gets invoked. A recent change in the resume code uses the softirq based delayed clock_was_set to support Xens resume mechanism.

linux-next contains a new warning which warns if smp_call_function_* is called from softirq context which gets triggered by that Xen change.

Fix this by moving the delayed clock_was_set() call to a work context.

---
 kernel/hrtimer.c |   28 +++++++++++++---------------
 1 file changed, 13 insertions(+), 15 deletions(-)

@@ -707,17 +707,20 @@ static int hrtimer_switch_to_hres(void)
 	return 1;
 }
 
+static void clock_was_set_work(struct work_struct *work)
+{
+	clock_was_set();
+}
+
+static DECLARE_WORK(hrtimer_work, clock_was_set_work);
+
 /*
- * Called from timekeeping code to reprogramm the hrtimer interrupt
- * device. If called from the timer interrupt context we defer it to
- * softirq context.
+ * Called from timekeeping and resume code to reprogramm the hrtimer
+ * interrupt device on all cpus.
  */
 void clock_was_set_delayed(void)
 {
-	struct hrtimer_cpu_base *cpu_base = &__get_cpu_var(hrtimer_bases);
-
-	cpu_base->clock_was_set = 1;
-	__raise_softirq_irqoff(HRTIMER_SOFTIRQ);
+	schedule_work(&hrtimer_work);
 }
 
 #else

@@ -766,8 +769,10 @@ void hrtimers_resume(void)
 	WARN_ONCE(!irqs_disabled(),
 		  KERN_INFO "hrtimers_resume() called with IRQs enabled!");
 
+	/* Retrigger on the local CPU */
 	retrigger_next_event(NULL);
-	timerfd_clock_was_set();
+	/* And schedule a retrigger for all others */
+	clock_was_set_delayed();
 }
 
 static inline void timer_stats_hrtimer_set_start_info(struct hrtimer *timer)

@@ -1416,13 +1421,6 @@ void hrtimer_peek_ahead_timers(void)
 
 static void run_hrtimer_softirq(struct softirq_action *h)
 {
-	struct hrtimer_cpu_base *cpu_base = &__get_cpu_var(hrtimer_bases);
-
-	if (cpu_base->clock_was_set) {
-		cpu_base->clock_was_set = 0;
-		clock_was_set();
-	}
-
 	hrtimer_peek_ahead_timers();
 }
 

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Thomas Gleixner <[email protected]>

commit 5ec2481b7b47a4005bb446d176e5d0257400c77d upstream.

smp_call_function_* must not be called from softirq context.

But clock_was_set() which calls on_each_cpu() is called from softirq context to implement a delayed clock_was_set() for the timer interrupt handler. Though that almost never gets invoked. A recent change in the resume code uses the softirq based delayed clock_was_set to support Xens resume mechanism.

linux-next contains a new warning which warns if smp_call_function_* is called from softirq context which gets triggered by that Xen change.

Fix this by moving the delayed clock_was_set() call to a work context.

---
 kernel/hrtimer.c |   28 +++++++++++++---------------
 1 file changed, 13 insertions(+), 15 deletions(-)

@@ -707,17 +707,20 @@ static int hrtimer_switch_to_hres(void)
 	return 1;
 }
 
+static void clock_was_set_work(struct work_struct *work)
+{
+	clock_was_set();
+}
+
+static DECLARE_WORK(hrtimer_work, clock_was_set_work);
+
 /*
- * Called from timekeeping code to reprogramm the hrtimer interrupt
- * device. If called from the timer interrupt context we defer it to
- * softirq context.
+ * Called from timekeeping and resume code to reprogramm the hrtimer
+ * interrupt device on all cpus.
  */
 void clock_was_set_delayed(void)
 {
-	struct hrtimer_cpu_base *cpu_base = &__get_cpu_var(hrtimer_bases);
-
-	cpu_base->clock_was_set = 1;
-	__raise_softirq_irqoff(HRTIMER_SOFTIRQ);
+	schedule_work(&hrtimer_work);
 }
 
 #else

@@ -766,8 +769,10 @@ void hrtimers_resume(void)
 	WARN_ONCE(!irqs_disabled(),
 		  KERN_INFO "hrtimers_resume() called with IRQs enabled!");
 
+	/* Retrigger on the local CPU */
 	retrigger_next_event(NULL);
-	timerfd_clock_was_set();
+	/* And schedule a retrigger for all others */
+	clock_was_set_delayed();
 }
 
 static inline void timer_stats_hrtimer_set_start_info(struct hrtimer *timer)

@@ -1416,13 +1421,6 @@ void hrtimer_peek_ahead_timers(void)
 
 static void run_hrtimer_softirq(struct softirq_action *h)
 {
-	struct hrtimer_cpu_base *cpu_base = &__get_cpu_var(hrtimer_bases);
-
-	if (cpu_base->clock_was_set) {
-		cpu_base->clock_was_set = 0;
-		clock_was_set();
-	}
-
 	hrtimer_peek_ahead_timers();
 }

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Steffen Maier <[email protected]>

commit 9edf7d75ee5f21663a0183d21f702682d0ef132f upstream.

Commit 64deb6efdc5504ce97b5c1c6f281fffbc150bd93
"[SCSI] zfcp: Use status_read_buf_num provided by FCP channel" started using a value returned by the channel but only evaluated the value if the fabric link is up.
Commit 8d88cf3f3b9af4713642caeb221b6d6a42019001
"[SCSI] zfcp: Update status read mempool"
introduced mempool resizings based on the above value.
On setting an FCP device online for the very first time since boot, a new zeroed adapter object is allocated. If the link is down, the number of status read requests remains zero. Since just the config data exchange is incomplete, we proceed with adapter open recovery. However, we unconditionally call mempool_resize with adapter->stat_read_buf_num == 0 in this case.

This causes a kernel message "kernel BUG at mm/mempool.c:131!" in process "zfcperp<FCP-device-bus-ID>" with last function mempool_resize in Krnl PSW and zfcp_erp_thread in the Call Trace.

Don't evaluate channel values which are invalid on link down. The number of status read requests is always valid, evaluated, and set to a positive minimum greater than zero. The adapter open recovery can proceed and the channel has status read buffers to inform us on a future link up event. While we are not aware of any other code path that could result in mempool resize attempts of size zero, we still also initialize the number of status read buffers to be posted to a static minimum number on adapter object allocation.

[sm: Backported to 3.0:
- Copyright notice changed slightly
- Don't use zfcp_fsf_convert_portspeed()]

---
 drivers/s390/scsi/zfcp_aux.c |    5 ++++-
 drivers/s390/scsi/zfcp_fsf.c |   21 +++++++++++++++------
 2 files changed, 19 insertions(+), 7 deletions(-)

@@ -3,7 +3,7 @@
  *
  * Module interface and handling of zfcp data structures.
  *
- * Copyright IBM Corporation 2002, 2010
+ * Copyright IBM Corp. 2002, 2013
  */
 
 /*

@@ -23,6 +23,7 @@
  *            Christof Schmitt
  *            Martin Petermann
  *            Sven Schuetz
+ *            Steffen Maier
  */
 
 #define KMSG_COMPONENT "zfcp"

@@ -414,6 +415,8 @@ struct zfcp_adapter *zfcp_adapter_enqueu
 	adapter->dma_parms.max_segment_size = ZFCP_QDIO_SBALE_LEN;
 	adapter->ccw_device->dev.dma_parms = &adapter->dma_parms;
 
+	adapter->stat_read_buf_num = FSF_STATUS_READS_RECOM;
+
 	if (!zfcp_scsi_adapter_register(adapter))
 		return adapter;
 

@@ -3,7 +3,7 @@
  *
  * Implementation of FSF commands.
  *
- * Copyright IBM Corporation 2002, 2010
+ * Copyright IBM Corp. 2002, 2013
  */
 
 #define KMSG_COMPONENT "zfcp"

@@ -455,11 +455,8 @@ static int zfcp_fsf_exchange_config_eval
 
 	fc_host_port_name(shost) = nsp->fl_wwpn;
 	fc_host_node_name(shost) = nsp->fl_wwnn;
-	fc_host_port_id(shost) = ntoh24(bottom->s_id);
-	fc_host_speed(shost) = bottom->fc_link_speed;
 	fc_host_supported_classes(shost) = FC_COS_CLASS2 | FC_COS_CLASS3;
 
-	adapter->hydra_version = bottom->adapter_type;
 	adapter->timer_ticks = bottom->timer_interval & ZFCP_FSF_TIMER_INT_MASK;
 	adapter->stat_read_buf_num = max(bottom->status_read_buf_num,
 					 (u16)FSF_STATUS_READS_RECOM);

@@ -467,6 +464,18 @@ static int zfcp_fsf_exchange_config_eval
 	if (fc_host_permanent_port_name(shost) == -1)
 		fc_host_permanent_port_name(shost) = fc_host_port_name(shost);
 
+	zfcp_scsi_set_prot(adapter);
+
+	/* no error return above here, otherwise must fix call chains */
+	/* do not evaluate invalid fields */
+	if (req->qtcb->header.fsf_status == FSF_EXCHANGE_CONFIG_DATA_INCOMPLETE)
+		return 0;
+
+	fc_host_port_id(shost) = ntoh24(bottom->s_id);
+	fc_host_speed(shost) = bottom->fc_link_speed;
+
+	adapter->hydra_version = bottom->adapter_type;
+
 	switch (bottom->fc_topology) {
 	case FSF_TOPO_P2P:
 		adapter->peer_d_id = ntoh24(bottom->peer_d_id);

@@ -488,8 +497,6 @@ static int zfcp_fsf_exchange_config_eval
 		return -EIO;
 	}
 
-	zfcp_scsi_set_prot(adapter);
-
 	return 0;
 }
 

@@ -540,6 +547,8 @@ static void zfcp_fsf_exchange_config_dat
 				&adapter->status);
 		zfcp_fsf_link_down_info_eval(req,
 			&qtcb->header.fsf_status_qual.link_down_info);
+		if (zfcp_fsf_exchange_config_evaluate(req))
+			return;
 		break;
 	default:
 		zfcp_erp_adapter_shutdown(adapter, 0, "fsecdh3");

3.0-stable review patch. If anyone has any objections, please let me know.

------------------

From: Eldad Zack <[email protected]>

commit be2f93a4c4981b3646b6f98f477154411b8516cb upstream.

Return SNDRV_PCM_POS_XRUN (snd_pcm_uframes_t) instead of SNDRV_PCM_STATE_XRUN (snd_pcm_state_t) from the pointer function of 6fire, as expected by snd_pcm_update_hw_ptr0().

Caught by sparse.

---
 sound/usb/6fire/pcm.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -541,7 +541,7 @@ static snd_pcm_uframes_t usb6fire_pcm_po
 	snd_pcm_uframes_t ret;
 
 	if (rt->panic || !sub)
-		return SNDRV_PCM_STATE_XRUN;
+		return SNDRV_PCM_POS_XRUN;
 
 	spin_lock_irqsave(&sub->lock, flags);
 	ret = sub->dma_off;

Quoting Greg Kroah-Hartman <[email protected]>:

We have additional build failures.

Total builds: 54 Total build errors: 20

Previously:
Total builds: 54 Total build errors: 17

Additional failures are i386/allmodconfig, i386/allyesconfig and mips/malta.

I don't have time to track down the culprit tonight (I am still in Down Under ;). I hope I can do it tomorrow.

Guenter

I iterated through the 3.0 patch queue with i386/allmodconfig, and got to:

Applying patch ifb-fix-rcu_sched-self-detected-stalls.patch patching file drivers/net/ifb.c

Now at patch ifb-fix-rcu_sched-self-detected-stalls.patch

  CHK     include/linux/version.h
  CHK     include/generated/utsrelease.h
  CALL    scripts/checksyscalls.sh
  CHK     include/generated/compile.h
  VDSOSYM arch/x86/vdso/vdso32-int80-syms.lds
  VDSOSYM arch/x86/vdso/vdso32-sysenter-syms.lds
  VDSOSYM arch/x86/vdso/vdso32-syms.lds
  LD      arch/x86/vdso/built-in.o
  LD      arch/x86/built-in.o
  CC [M]  drivers/net/ifb.o

drivers/net/ifb.c: In function ‘ifb_init_module’:
drivers/net/ifb.c:257:3: error: implicit declaration of function ‘cond_resched’ [-Werror=implicit-function-declaration]
cc1: some warnings being treated as errors
make[2]: *** [drivers/net/ifb.o] Error 1
make[1]: *** [drivers/net] Error 2
make[1]: *** Waiting for unfinished jobs....
make: *** [drivers] Error 2

I think this patch needs to add a '#include <linux/sched.h>', but that header is being included indirectly in some other configurations (and in mainline).

With that change, I can apply the remaining patches and compile 3.0.88-rc1 successfully.

Ben.

Ben Hutchings
All extremists should be taken out and shot.

Yes, that is what I found as well.

Guenter

Odd that this didn't trigger on x86-64. Anyway, thanks, I've made this change to the patch, so all should be good in the final version. If not, please let me know.

thanks,

greg k-h