of/documentation: Update G2D documentation
Subsystems (4)
PATCH RESEND v2 2/3 of/documentation: Update G2D documentation
Exynos5250 G2D IP requires only the gate clock. Update the binding documentation accordingly.
---
Updated the description of clock-names as suggested by Tomasz Figa.
--- .../devicetree/bindings/gpu/samsung-g2d.txt | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)
Documentation/devicetree/bindings/gpu/samsung-g2d.txt +5 -2
@@ -11,8 +11,11 @@ Required properties: - interrupts : G2D interrupt number to the CPU. - clocks : from common clock binding: handle to G2D clocks. - - clock-names : from common clock binding: must contain "sclk_fimg2d" and - "fimg2d", corresponding to entries in the clocks property. + - clock-names : names of clocks listed in clocks property, in the same + order, depending on SoC type: + - for S5PV210 and Exynos4 based SoCs: "fimg2d" and + "sclk_fimg2d" + - for Exynos5250 SoC: "fimg2d". Example: g2d at 12800000 {
Signature · 1 line
1.7.9.5
PATCH RESEND v2 2/3 of/documentation: Update G2D documentation
Hi Sachin,
Quoted 17 lines · On Tuesday 09 of July 2013 11:59:15 Sachin Kamat wrote:
Exynos5250 G2D IP requires only the gate clock. Update the binding documentation accordingly.
Signed-off-by Sachin Kamat <[email protected]>Cc Inki Dae <[email protected]>---
Updated the description of clock-names as suggested by Tomasz Figa.--- .../devicetree/bindings/gpu/samsung-g2d.txt | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)(quoted diff) +0
-0
b/Documentation/devicetree/bindings/gpu/samsung-g2d.txtindex 3f454ff..c4f358d 100644
Documentation/devicetree/bindings/gpu/samsung-g2d.txt Required properties: · line 18
Quoted 10 lines
Documentation/devicetree/bindings/gpu/samsung-g2d.txt +5
-2@@ -11,8 +11,11 @@ Required properties: - interrupts : G2D interrupt number to the CPU. - clocks : from common clock binding: handle to G2D clocks. - - clock-names : from common clock binding: must contain "sclk_fimg2d" and - "fimg2d", corresponding to entries in the clocks property. + - clock-names : names of clocks listed in clocks property, in the same + order, depending on SoC type: + - for S5PV210 and Exynos4 based SoCs: "fimg2d" and + "sclk_fimg2d" + - for Exynos5250 SoC: "fimg2d".
This looks fine for me now.
Best regards,
Tomasz
PATCH RESEND v2 2/3 of/documentation: Update G2D documentation
In reply to Sachin KamatQuoting Sachin Kamat (2013-07-08 23:29:15)
Quoted 5 lines
Exynos5250 G2D IP requires only the gate clock. Update the binding documentation accordingly.
Signed-off-by Sachin Kamat <[email protected]>Cc Inki Dae <[email protected]>
Taken into clk-next.
Thanks,
Mike
Quoted 26 lines
---
Updated the description of clock-names as suggested by Tomasz Figa.--- .../devicetree/bindings/gpu/samsung-g2d.txt | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)Documentation/devicetree/bindings/gpu/samsung-g2d.txt +5
-2@@ -11,8 +11,11 @@ Required properties: - interrupts : G2D interrupt number to the CPU. - clocks : from common clock binding: handle to G2D clocks. - - clock-names : from common clock binding: must contain "sclk_fimg2d" and - "fimg2d", corresponding to entries in the clocks property. + - clock-names : names of clocks listed in clocks property, in the same + order, depending on SoC type: + - for S5PV210 and Exynos4 based SoCs: "fimg2d" and + "sclk_fimg2d" + - for Exynos5250 SoC: "fimg2d". Example: g2d at 12800000 {Signature · 1 line
1.7.9.5