Skip to contentSkip to conversation

tests: xml: reorder XML elements in sets

PATCH Applied Arturo Borrero Gonzalez 2 participants 2 messages Aug 12, 2013 netfilter

lore
Share & tools
lore

Arturo Borrero Gonzalez

author
#0 lore raw

PATCH 1/1 tests: xml: reorder XML elements in sets

Some node reorganization in order to have an input file equal to what set_snprintf will output.

Signed-off-by Arturo Borrero Gonzalez <[email protected]>
---
 tests/xmlfiles/73-set.xml |    2 +-
 tests/xmlfiles/74-set.xml |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)
tests/xmlfiles/73-set.xml +1 -1
index 2cf1c03..88bf402 100644
@@ -1,2 +1,2 @@
-<set><name>set0</name><table>filter</table><family>ip</family><flags>0</flags><key_type>0</key_type><key_len>0</key_len><data_type>0</data_type><data_len>0</data_len><set_elem><flags>0</flags><key><data_reg type="value"><len>4</len><data0>0x0300a8c0</data0></data_reg></key></set_elem><set_elem><flags>0</flags><key><data_reg type="value"><len>4</len><data0>0x0200a8c0</data0></data_reg></key></set_elem><set_elem><flags>0</flags><key><data_reg type="value"><len>4</len><data0>0x0100a8c0</data0></data_reg></key></set_elem></set>
+<set><family>ip</family><table>filter</table><name>set0</name><flags>0</flags><key_type>0</key_type><key_len>0</key_len><data_type>0</data_type><data_len>0</data_len><set_elem><flags>0</flags><key><data_reg type="value"><len>4</len><data0>0x0300a8c0</data0></data_reg></key></set_elem><set_elem><flags>0</flags><key><data_reg type="value"><len>4</len><data0>0x0200a8c0</data0></data_reg></key></set_elem><set_elem><flags>0</flags><key><data_reg type="value"><len>4</len><data0>0x0100a8c0</data0></data_reg></key></set_elem></set>
 <!-- nft add rule ip filter test ip daddr { 192.168.0.1, 192.168.0.2, 192.168.0.3 } tcp dport 443 counter accept -->
tests/xmlfiles/74-set.xml +1 -1
index eaf9b7d..5b6e8f1 100644
@@ -1,2 +1,2 @@
-<set><name>set0</name><table>filter</table><family>ip6</family><flags>0</flags><key_type>0</key_type><key_len>0</key_len><data_type>0</data_type><data_len>0</data_len><set_elem><flags>0</flags><key><data_reg type="value"><len>16</len><data0>0xc09a002a</data0><data1>0x2700cac1</data1><data2>0x00000000</data2><data3>0x70010000</data3></data_reg></key></set_elem><set_elem><flags>0</flags><key><data_reg type="value"><len>16</len><data0>0xc09a002a</data0><data1>0x2700cac1</data1><data2>0x00000000</data2><data3>0x50010000</data3></data_reg></key></set_elem></set>
+<set><family>ip6</family><table>filter</table><name>set0</name><flags>0</flags><key_type>0</key_type><key_len>0</key_len><data_type>0</data_type><data_len>0</data_len><set_elem><flags>0</flags><key><data_reg type="value"><len>16</len><data0>0xc09a002a</data0><data1>0x2700cac1</data1><data2>0x00000000</data2><data3>0x70010000</data3></data_reg></key></set_elem><set_elem><flags>0</flags><key><data_reg type="value"><len>16</len><data0>0xc09a002a</data0><data1>0x2700cac1</data1><data2>0x00000000</data2><data3>0x50010000</data3></data_reg></key></set_elem></set>
 <!-- nft add rule ip6 filter test ip6 daddr { 2a00:9ac0:c1ca:27::150, 2a00:9ac0:c1ca:27::170, } counter accept -->
maintainer Applied
#1 lore raw
Quoted 2 lines · Arturo Borrero Gonzalez

Some node reorganization in order to have an input file equal to what set_snprintf will output.

Applied, thanks.