clk/exynos5250: change parent to aclk200_disp1 for hdmi subsystem

PATCH New Rahul Sharma 3 participants 3 messages Aug 23, 2013 – Aug 29, 2013

Subsystems (3)

Common clk Arm Samsung Exynos Samsung SoC clock drivers

lore

Share & tools

lore

Rahul Sharma

author

2013-08-23 06:54 UTC #0 lore raw

PATCH 1/1 clk/exynos5250: change parent to aclk200_disp1 for hdmi subsystem

parent of hdmi and mixer block is mentioned as aclk200 which is not correct. It is clocked by the ouput of aclk200_disp1. Hence parent for mixer and hdmi clocks is changed to aclk200_disp1.

Signed-off-by Rahul Sharma <[email protected]>

---
This set is based on Mike's clk-next branch at
https://git.linaro.org/gitweb?p=people/mturquette/linux.git

 drivers/clk/samsung/clk-exynos5250.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

drivers/clk/samsung/clk-exynos5250.c +2 -2

index a9916a4..d90e593 100644
@@ -489,8 +489,8 @@ static struct samsung_gate_clock exynos5250_gate_clks[] __initdata = {
 	GATE(mie1, "mie1", "aclk200", GATE_IP_DISP1, 1, 0, 0),
 	GATE(dsim0, "dsim0", "aclk200", GATE_IP_DISP1, 3, 0, 0),
 	GATE(dp, "dp", "aclk200", GATE_IP_DISP1, 4, 0, 0),
-	GATE(mixer, "mixer", "aclk200", GATE_IP_DISP1, 5, 0, 0),
-	GATE(hdmi, "hdmi", "aclk200", GATE_IP_DISP1, 6, 0, 0),
+	GATE(mixer, "mixer", "mout_aclk200_disp1", GATE_IP_DISP1, 5, 0, 0),
+	GATE(hdmi, "hdmi", "mout_aclk200_disp1", GATE_IP_DISP1, 6, 0, 0),
 	GATE(g2d, "g2d", "aclk200", GATE_IP_ACP, 3, 0, 0),
 };

Signature · 1 line

1.7.10.4

Mike Turquette

2013-08-29 02:24 UTC #1 lore raw

PATCH 1/1 clk/exynos5250: change parent to aclk200_disp1 for hdmi subsystem

Quoting Rahul Sharma (2013-08-23 00:16:59)

Quoted 5 lines

parent of hdmi and mixer block is mentioned as aclk200 which is not correct. It is clocked by the ouput of aclk200_disp1. Hence parent for mixer and hdmi clocks is changed to aclk200_disp1.
Signed-off-by Rahul Sharma <[email protected]>

Taken into clk-next.

Thanks,
Mike

Quoted 24 lines

---
This set is based on Mike's clk-next branch at
https://git.linaro.org/gitweb?p=people/mturquette/linux.git

 drivers/clk/samsung/clk-exynos5250.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

drivers/clk/samsung/clk-exynos5250.c +2 -2

index a9916a4..d90e593 100644
@@ -489,8 +489,8 @@ static struct samsung_gate_clock exynos5250_gate_clks[] __initdata = {
        GATE(mie1, "mie1", "aclk200", GATE_IP_DISP1, 1, 0, 0),
        GATE(dsim0, "dsim0", "aclk200", GATE_IP_DISP1, 3, 0, 0),
        GATE(dp, "dp", "aclk200", GATE_IP_DISP1, 4, 0, 0),
-       GATE(mixer, "mixer", "aclk200", GATE_IP_DISP1, 5, 0, 0),
-       GATE(hdmi, "hdmi", "aclk200", GATE_IP_DISP1, 6, 0, 0),
+       GATE(mixer, "mixer", "mout_aclk200_disp1", GATE_IP_DISP1, 5, 0, 0),
+       GATE(hdmi, "hdmi", "mout_aclk200_disp1", GATE_IP_DISP1, 6, 0, 0),
        GATE(g2d, "g2d", "aclk200", GATE_IP_ACP, 3, 0, 0),
 };

Signature · 1 line

1.7.10.4

Rahul Sharma

2013-08-29 03:21 UTC #2 lore raw

PATCH 1/1 clk/exynos5250: change parent to aclk200_disp1 for hdmi subsystem

Thanks Mike.

Quoted 36 lines · Mike Turquette

Quoting Rahul Sharma (2013-08-23 00:16:59)
Quoted 5 lines
parent of hdmi and mixer block is mentioned as aclk200 which is not correct. It is clocked by the ouput of aclk200_disp1. Hence parent for mixer and hdmi clocks is changed to aclk200_disp1.
Signed-off-by Rahul Sharma <[email protected]>
Taken into clk-next.
Thanks,
Mike
Quoted 24 lines
---
This set is based on Mike's clk-next branch at
https://git.linaro.org/gitweb?p=people/mturquette/linux.git
 drivers/clk/samsung/clk-exynos5250.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/clk/samsung/clk-exynos5250.c +2 -3
index a9916a4..d90e593 100644
@@ -489,8 +489,8 @@ static struct samsung_gate_clock exynos5250_gate_clks[] __initdata = {
        GATE(mie1, "mie1", "aclk200", GATE_IP_DISP1, 1, 0, 0),
        GATE(dsim0, "dsim0", "aclk200", GATE_IP_DISP1, 3, 0, 0),
        GATE(dp, "dp", "aclk200", GATE_IP_DISP1, 4, 0, 0),
-       GATE(mixer, "mixer", "aclk200", GATE_IP_DISP1, 5, 0, 0),
-       GATE(hdmi, "hdmi", "aclk200", GATE_IP_DISP1, 6, 0, 0),
+       GATE(mixer, "mixer", "mout_aclk200_disp1", GATE_IP_DISP1, 5, 0, 0),
+       GATE(hdmi, "hdmi", "mout_aclk200_disp1", GATE_IP_DISP1, 6, 0, 0),
        GATE(g2d, "g2d", "aclk200", GATE_IP_ACP, 3, 0, 0),
 };
 
--
1.7.10.4