Pull request - arm/zynq v3
Hi Albert,
please pull these 3 zynq patches to your arm tree.
I have rebased the tree on the 2013.07 to remove that new nds32 patches.
There is still pending the arm: lds: Remove libgcc eabi exception handling tables patch. Have you considered to also add it?
v3:
- Rebase on the v2013.07 because Albert didn't want to nds32 stuff
v2:
- Changed email address,
- There was incorrect rebase which I have fixed - correct sha1 now
Thanks.
Michal
The following changes since commit 62c175fbb8a0f9a926c88294ea9f7e88eb898f6c:
Prepare v2013.07 (2013-07-23 07:58:13 -0400)
are available in the git repository at:
git://www.denx.de/git/u-boot-microblaze.git zynq
for you to fetch changes up to 037e0d25c6ee6367beca3062759993d10759dff2:
zynq: Enable axi ethernet and emaclite driver initialization (2013-08-19 09:32:00 +0200)
----------------------------------------------------------------
Michal Simek (3):
zynq: Add new ddrc driver for ECC support
zynq: slcr: Wait 100ms till clk is properly setup
zynq: Enable axi ethernet and emaclite driver initialization
arch/arm/cpu/armv7/zynq/Makefile | 1 + arch/arm/cpu/armv7/zynq/ddrc.c | 50 ++++++++++++++++++++++++++++++ arch/arm/cpu/armv7/zynq/slcr.c | 2 +- arch/arm/include/asm/arch-zynq/hardware.h | 8 +++++ arch/arm/include/asm/arch-zynq/sys_proto.h | 1 + board/xilinx/zynq/board.c | 19 ++++++++++++ 6 files changed, 80 insertions(+), 1 deletion(-) create mode 100644 arch/arm/cpu/armv7/zynq/ddrc.c
Signature · 14 lines
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91 w: www.monstr.eu p: +42-0-721842854 Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/ Maintainer of Linux kernel - Xilinx Zynq ARM architecture Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 263 bytes Desc: OpenPGP digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130819/514970c3/attachment.pgp>
Hi Michal,
Quoted 37 lines · Michal Simek
Hi Albert,
please pull these 3 zynq patches to your arm tree.
I have rebased the tree on the 2013.07 to remove that new nds32 patches.There is still pending the arm: lds: Remove libgcc eabi exception handling tables patch. Have you considered to also add it?
v3:
- Rebase on the v2013.07 because Albert didn't want to nds32 stuffv2:
- Changed email address,
- There was incorrect rebase which I have fixed - correct sha1 nowThanks.
MichalThe following changes since commit
62c175fbb8a0f9a926c88294ea9f7e88eb898f6c:Prepare v2013.07 (2013-07-23 07:58:13 -0400)
are available in the git repository at:
git://www.denx.de/git/u-boot-microblaze.gitzynqfor you to fetch changes up to
037e0d25c6ee6367beca3062759993d10759dff2:zynq: Enable axi ethernet and emaclite driver initialization (2013-08-19 09:32:00 +0200)
----------------------------------------------------------------
Michal Simek (3):
zynq: Add new ddrc driver for ECC support
zynq: slcr: Wait 100ms till clk is properly setup
zynq: Enable axi ethernet and emaclite driver initialization
Quoted 10 lines
arch/arm/cpu/armv7/zynq/Makefile | 1 + arch/arm/cpu/armv7/zynq/ddrc.c | 50 ++++++++++++++++++++++++++++++ arch/arm/cpu/armv7/zynq/slcr.c | 2 +- arch/arm/include/asm/arch-zynq/hardware.h | 8 +++++ arch/arm/include/asm/arch-zynq/sys_proto.h | 1 + board/xilinx/zynq/board.c | 19 ++++++++++++ 6 files changed, 80 insertions(+), 1 deletion(-) create mode 100644 arch/arm/cpu/armv7/zynq/ddrc.c
Applied to u-boot-arm/master, thanks!
Amicalement,
Signature · 1 line
Albert.
Quoted 53 lines · Albert ARIBAUD
Hi Michal,
Quoted 37 lines · Michal Simek
Hi Albert,
please pull these 3 zynq patches to your arm tree.
I have rebased the tree on the 2013.07 to remove that new nds32 patches.There is still pending the arm: lds: Remove libgcc eabi exception handling tables patch. Have you considered to also add it?
v3:
- Rebase on the v2013.07 because Albert didn't want to nds32 stuffv2:
- Changed email address,
- There was incorrect rebase which I have fixed - correct sha1 nowThanks.
MichalThe following changes since commit
62c175fbb8a0f9a926c88294ea9f7e88eb898f6c:Prepare v2013.07 (2013-07-23 07:58:13 -0400)
are available in the git repository at:
git://www.denx.de/git/u-boot-microblaze.gitzynqfor you to fetch changes up to
037e0d25c6ee6367beca3062759993d10759dff2:zynq: Enable axi ethernet and emaclite driver initialization (2013-08-19 09:32:00 +0200)
----------------------------------------------------------------
Michal Simek (3):
zynq: Add new ddrc driver for ECC support
zynq: slcr: Wait 100ms till clk is properly setup
zynq: Enable axi ethernet and emaclite driver initializationQuoted 10 lines
arch/arm/cpu/armv7/zynq/Makefile | 1 + arch/arm/cpu/armv7/zynq/ddrc.c | 50 ++++++++++++++++++++++++++++++ arch/arm/cpu/armv7/zynq/slcr.c | 2 +- arch/arm/include/asm/arch-zynq/hardware.h | 8 +++++ arch/arm/include/asm/arch-zynq/sys_proto.h | 1 + board/xilinx/zynq/board.c | 19 ++++++++++++ 6 files changed, 80 insertions(+), 1 deletion(-) create mode 100644 arch/arm/cpu/armv7/zynq/ddrc.c
Quoted 2 lines
Applied to u-boot-arm/master, thanks!
Thanks.
What about this patch "arm: lds: Remove libgcc eabi exception handling tables"?
Thanks,
Michal
Signature · 14 lines
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91 w: www.monstr.eu p: +42-0-721842854 Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/ Maintainer of Linux kernel - Xilinx Zynq ARM architecture Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 263 bytes Desc: OpenPGP digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130904/dccd4edd/attachment.pgp>
[U-Boot] Pull request - arm/zynq
Hi Albert,
please pull these two patches to your arm next branch.
It depends on "zynq: Use arch_cpu_init() instead of lowlevel_init()" (sha1: 262f08d6ea18a62f827b8ccb60f355ca2eaf6e2b) patch which you have in your branch that's why I have rebased them on the top.
Thanks,
Michal
The following changes since commit c0e5dd88c438a41bf180dde0c2dc4c67dcd8058d:
Merge branch 'u-boot-atmel/master' into 'u-boot-arm/master' (2013-11-05 20:50:39 +0100)
are available in the git repository at:
git://www.denx.de/git/u-boot-microblaze.git zynq
for you to fetch changes up to b5f05b063413245e3d29186739fb5db98d137dfd:
arm: zynq : Revert TZ_DDR_RAM to secure. (2013-11-06 09:24:06 +0100)
----------------------------------------------------------------
Michal Simek (1):
arm: zynq: Do not remap OCM to high address
Radhey Shyam Pandey (1):
arm: zynq : Revert TZ_DDR_RAM to secure.
arch/arm/cpu/armv7/zynq/cpu.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-)
Signature · 14 lines
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91 w: www.monstr.eu p: +42-0-721842854 Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/ Maintainer of Linux kernel - Xilinx Zynq ARM architecture Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 263 bytes Desc: OpenPGP digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20131106/483c5ecd/attachment.pgp>
[U-Boot] Pull request - arm/zynq
Hi Michal,
Quoted 10 lines · Michal Simek
Hi Albert,
please pull these two patches to your arm next branch.
It depends on "zynq: Usearch_cpu_init()instead oflowlevel_init()" (sha1:262f08d6ea18a62f827b8ccb60f355ca2eaf6e2b) patch which you have in your branch that's why I have rebased them on the top.Thanks,
Michal
Is this really for 'next' and not 'master'? IOW, do you really mean it *not* to go into 2014.01?
Amicalement,
Signature · 1 line
Albert.
[U-Boot] Pull request - arm/zynq
Hi Albert,
Quoted 13 lines · Albert ARIBAUD
Hi Michal,
Quoted 8 lines · Michal Simek
Hi Albert,
please pull these two patches to your arm next branch.
It depends on "zynq: Usearch_cpu_init()instead oflowlevel_init()" (sha1:262f08d6ea18a62f827b8ccb60f355ca2eaf6e2b) patch which you have in your branch that's why I have rebased them on the top.
Quoted 5 lines
Quoted 2 lines
Thanks,
MichalIs this really for 'next' and not 'master'? IOW, do you really mean it *not* to go into 2014.01?
Every maintainer has different strategies for branches. But anyway, I want to add these patches/fixes to the 2014.01.
Thanks,
Michal
Signature · 14 lines
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91 w: www.monstr.eu p: +42-0-721842854 Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/ Maintainer of Linux kernel - Xilinx Zynq ARM architecture Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 263 bytes Desc: OpenPGP digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20131107/7f189bff/attachment.pgp>
[U-Boot] Pull request - arm/zynq
In reply to Michal SimekHi Michal,
Quoted 29 lines · Michal Simek
Hi Albert,
please pull these two patches to your arm next branch.
It depends on "zynq: Usearch_cpu_init()instead oflowlevel_init()" (sha1:262f08d6ea18a62f827b8ccb60f355ca2eaf6e2b) patch which you have in your branch that's why I have rebased them on the top.Thanks,
MichalThe following changes since commit
c0e5dd88c438a41bf180dde0c2dc4c67dcd8058d:Merge branch 'u-boot-atmel/master' into 'u-boot-arm/master' (2013-11-05 20:50:39 +0100)
are available in the git repository at:
git://www.denx.de/git/u-boot-microblaze.gitzynqfor you to fetch changes up to
b5f05b063413245e3d29186739fb5db98d137dfd:arm: zynq : Revert
TZ_DDR_RAMto secure. (2013-11-06 09:24:06 +0100)----------------------------------------------------------------
Michal Simek (1):
arm: zynq: Do not remap OCM to high address
Quoted 6 lines
Radhey Shyam Pandey (1):
arm: zynq : RevertTZ_DDR_RAMto secure.arch/arm/cpu/armv7/zynq/cpu.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-)
Applied to u-boot-arm/master, thanks!
Amicalement,
Signature · 1 line
Albert.