Skip to contentSkip to conversation

arm: lds: Remove libgcc eabi exception handling tables

PATCH New Michal Simek 3 participants 7 messages Jul 25, 2013 – Sep 6, 2013 Arm (32-bit)

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 arm: lds: Remove libgcc eabi exception handling tables

Remove ARM eabi exception handling tables (for frame unwinding). AFAICT, u-boot stubs away the frame unwiding routines, so the tables will more or less just consume space. It should be OK to remove them.

---
This patch was sent to ML as RFC (May 9)

Here is the origin response in connection to this patch.

Ok, so Michal and I just did some fiddling with zynq builds and *exidx* sections.

By default the *exidx* sections are between rodata and data, so removing them causes many apparent changes at the binary level. However, builds of zynq based on ARM master with the patch above vs master with a patch mapping *exidx* sections after BSS gives identical binaries. Thus the RFC has no functional effect.

Also, ARM EHABI states that [exception] Tables are not required for ABI compliance at the C/Assembler level but are required for C++.

http://infocenter.arm.com/help/topic/com.arm.doc.ihi0038a/IHI0038A_ehabi.pdf

So as long as we don't put any C++ code in U-Boot (a prospect that I don't see happening any time soon), this RFC is safe and either is a no-op or removes useless bytes from the binary.

---
 arch/arm/cpu/u-boot.lds | 2 ++
 1 file changed, 2 insertions(+)
arch/arm/cpu/u-boot.lds +2 -0
index 3037885..8894c8a 100644
@@ -113,4 +113,6 @@ SECTIONS
 	/DISCARD/ : { *(.plt*) }
 	/DISCARD/ : { *(.interp*) }
 	/DISCARD/ : { *(.gnu*) }
+	/DISCARD/ : { *(.ARM.exidx*) }
+	/DISCARD/ : { *(.gnu.linkonce.armexidx.*) }
 }

--
1.8.2.3

-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 198 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130725/9baf542d/attachment.pgp>

#1 lore raw

PATCH 1/1 arm: lds: Remove libgcc eabi exception handling tables

Hi Michal,

Quoted 45 lines · Michal Simek

Remove ARM eabi exception handling tables (for frame unwinding). AFAICT, u-boot stubs away the frame unwiding routines, so the tables will more or less just consume space. It should be OK to remove them.

---
This patch was sent to ML as RFC (May 9)

Here is the origin response in connection to this patch.

Ok, so Michal and I just did some fiddling with zynq builds and *exidx* sections.

By default the *exidx* sections are between rodata and data, so removing them causes many apparent changes at the binary level. However, builds of zynq based on ARM master with the patch above vs master with a patch mapping *exidx* sections after BSS gives identical binaries. Thus the RFC has no functional effect.

Also, ARM EHABI states that [exception] Tables are not required for ABI compliance at the C/Assembler level but are required for C++.

http://infocenter.arm.com/help/topic/com.arm.doc.ihi0038a/IHI0038A_ehabi.pdf

So as long as we don't put any C++ code in U-Boot (a prospect that I don't see happening any time soon), this RFC is safe and either is a no-op or removes useless bytes from the binary.

---
 arch/arm/cpu/u-boot.lds | 2 ++
 1 file changed, 2 insertions(+)
arch/arm/cpu/u-boot.lds +2 -1
index 3037885..8894c8a 100644
@@ -113,4 +113,6 @@ SECTIONS
 	/DISCARD/ : { *(.plt*) }
 	/DISCARD/ : { *(.interp*) }
 	/DISCARD/ : { *(.gnu*) }
+	/DISCARD/ : { *(.ARM.exidx*) }
+	/DISCARD/ : { *(.gnu.linkonce.armexidx.*) }
 }
--
Quoted 2 lines

1.8.2.3

The good news is, it applies and does not cause any build issues.

The less good news is, arch/arm/cpu/u-boot.lds is not the only linker script file to fix if we want to fix it this way.

The fact is, I am not sure removing sections from the ELF filein order to avoid them being in the binary is actually the right way to go. I have recently had to 'un-discard' some sections in order for 'offline' debugging tools to properly understand the ELF file.

So I am wondering if we should not stop using /DISCARD/ and start using $(CROSS_COMPILE)objcopy options (-j or --strip-* and --remove-section).

This way, the ELF file would be as complete as any debug tool might expect it (e.g. objdump, especially when debugging relocation issues) yet the binary file would remain unchanged.

But past rc2 is not a time to start such a change.

Still, I'd like your fix to be consistent across all of ARM. Can you change all the linker scripts used for build ARM targets? These are, according to an ugly mix of cat LOG/*.MAKELOG, sed, grep and sort -u:

arch/arm/cpu/arm1136/u-boot-spl.lds
arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds
arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds
arch/arm/cpu/armv7/am33xx/u-boot-spl.lds
arch/arm/cpu/armv7/omap-common/u-boot-spl.lds
arch/arm/cpu/armv7/socfpga/u-boot-spl.lds
arch/arm/cpu/ixp/u-boot.lds
arch/arm/cpu/u-boot.lds
arch/arm/cpu/u-boot-spl.lds
board/actux1/u-boot.lds
board/actux2/u-boot.lds
board/actux3/u-boot.lds
board/ait/cam_enc_4xx/u-boot-spl.lds
board/davinci/da8xxevm/u-boot-spl-da850evm.lds
board/davinci/da8xxevm/u-boot-spl-hawk.lds
board/dvlhost/u-boot.lds
board/freescale/mx31ads/u-boot.lds
board/samsung/common/exynos-uboot-spl.lds
board/ti/am335x/u-boot.lds
board/vpac270/u-boot-spl.lds

Amicalement,

Signature · 1 line
Albert.
#2 lore raw

PATCH 1/1 arm: lds: Remove libgcc eabi exception handling tables

Hi Albert,

Quoted 88 lines · Albert ARIBAUD

Hi Michal,

Quoted 45 lines · Michal Simek

Remove ARM eabi exception handling tables (for frame unwinding). AFAICT, u-boot stubs away the frame unwiding routines, so the tables will more or less just consume space. It should be OK to remove them.

---
This patch was sent to ML as RFC (May 9)

Here is the origin response in connection to this patch.

Ok, so Michal and I just did some fiddling with zynq builds and *exidx* sections.

By default the *exidx* sections are between rodata and data, so removing them causes many apparent changes at the binary level. However, builds of zynq based on ARM master with the patch above vs master with a patch mapping *exidx* sections after BSS gives identical binaries. Thus the RFC has no functional effect.

Also, ARM EHABI states that [exception] Tables are not required for ABI compliance at the C/Assembler level but are required for C++.

http://infocenter.arm.com/help/topic/com.arm.doc.ihi0038a/IHI0038A_ehabi.pdf

So as long as we don't put any C++ code in U-Boot (a prospect that I don't see happening any time soon), this RFC is safe and either is a no-op or removes useless bytes from the binary.

---
 arch/arm/cpu/u-boot.lds | 2 ++
 1 file changed, 2 insertions(+)
arch/arm/cpu/u-boot.lds +2 -1
index 3037885..8894c8a 100644
@@ -113,4 +113,6 @@ SECTIONS
 	/DISCARD/ : { *(.plt*) }
 	/DISCARD/ : { *(.interp*) }
 	/DISCARD/ : { *(.gnu*) }
+	/DISCARD/ : { *(.ARM.exidx*) }
+	/DISCARD/ : { *(.gnu.linkonce.armexidx.*) }
 }
--
Quoted 2 lines

1.8.2.3

The good news is, it applies and does not cause any build issues.

The less good news is, arch/arm/cpu/u-boot.lds is not the only linker script file to fix if we want to fix it this way.

The fact is, I am not sure removing sections from the ELF filein order to avoid them being in the binary is actually the right way to go. I have recently had to 'un-discard' some sections in order for 'offline' debugging tools to properly understand the ELF file.

So I am wondering if we should not stop using /DISCARD/ and start using $(CROSS_COMPILE)objcopy options (-j or --strip-* and --remove-section).

This way, the ELF file would be as complete as any debug tool might expect it (e.g. objdump, especially when debugging relocation issues) yet the binary file would remain unchanged.

But past rc2 is not a time to start such a change.

Still, I'd like your fix to be consistent across all of ARM. Can you change all the linker scripts used for build ARM targets? These are, according to an ugly mix of cat LOG/*.MAKELOG, sed, grep and sort -u:

arch/arm/cpu/arm1136/u-boot-spl.lds
arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds
arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds
arch/arm/cpu/armv7/am33xx/u-boot-spl.lds
arch/arm/cpu/armv7/omap-common/u-boot-spl.lds
arch/arm/cpu/armv7/socfpga/u-boot-spl.lds
arch/arm/cpu/ixp/u-boot.lds
arch/arm/cpu/u-boot.lds
arch/arm/cpu/u-boot-spl.lds
board/actux1/u-boot.lds
board/actux2/u-boot.lds
board/actux3/u-boot.lds

Quoted 8 lines

board/ait/cam_enc_4xx/u-boot-spl.lds
board/davinci/da8xxevm/u-boot-spl-da850evm.lds
board/davinci/da8xxevm/u-boot-spl-hawk.lds
board/dvlhost/u-boot.lds
board/freescale/mx31ads/u-boot.lds
board/samsung/common/exynos-uboot-spl.lds
board/ti/am335x/u-boot.lds
board/vpac270/u-boot-spl.lds

Honestly for me is much easier just fix our timer code not to use this section instead of trying to fix 3rd party platforms.
Is there any reason why too many linkers scripts are in u-boot for ARM?

Thanks,
Michal

Signature · 14 lines
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/
Maintainer of Linux kernel - Xilinx Zynq ARM architecture
Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform


-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 263 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130905/e6cb68fc/attachment.pgp>
#3 lore raw

PATCH 1/1 arm: lds: Remove libgcc eabi exception handling tables

Hi Michal,

Quoted 100 lines · Michal Simek

Hi Albert,

Quoted 88 lines · Albert ARIBAUD

Hi Michal,

Quoted 45 lines · Michal Simek

Remove ARM eabi exception handling tables (for frame unwinding). AFAICT, u-boot stubs away the frame unwiding routines, so the tables will more or less just consume space. It should be OK to remove them.

---
This patch was sent to ML as RFC (May 9)

Here is the origin response in connection to this patch.

Ok, so Michal and I just did some fiddling with zynq builds and *exidx* sections.

By default the *exidx* sections are between rodata and data, so removing them causes many apparent changes at the binary level. However, builds of zynq based on ARM master with the patch above vs master with a patch mapping *exidx* sections after BSS gives identical binaries. Thus the RFC has no functional effect.

Also, ARM EHABI states that [exception] Tables are not required for ABI compliance at the C/Assembler level but are required for C++.

http://infocenter.arm.com/help/topic/com.arm.doc.ihi0038a/IHI0038A_ehabi.pdf

So as long as we don't put any C++ code in U-Boot (a prospect that I don't see happening any time soon), this RFC is safe and either is a no-op or removes useless bytes from the binary.

---
 arch/arm/cpu/u-boot.lds | 2 ++
 1 file changed, 2 insertions(+)
arch/arm/cpu/u-boot.lds +2 -1
index 3037885..8894c8a 100644
@@ -113,4 +113,6 @@ SECTIONS
 	/DISCARD/ : { *(.plt*) }
 	/DISCARD/ : { *(.interp*) }
 	/DISCARD/ : { *(.gnu*) }
+	/DISCARD/ : { *(.ARM.exidx*) }
+	/DISCARD/ : { *(.gnu.linkonce.armexidx.*) }
 }
--
Quoted 2 lines

1.8.2.3

The good news is, it applies and does not cause any build issues.

The less good news is, arch/arm/cpu/u-boot.lds is not the only linker script file to fix if we want to fix it this way.

The fact is, I am not sure removing sections from the ELF filein order to avoid them being in the binary is actually the right way to go. I have recently had to 'un-discard' some sections in order for 'offline' debugging tools to properly understand the ELF file.

So I am wondering if we should not stop using /DISCARD/ and start using $(CROSS_COMPILE)objcopy options (-j or --strip-* and --remove-section).

This way, the ELF file would be as complete as any debug tool might expect it (e.g. objdump, especially when debugging relocation issues) yet the binary file would remain unchanged.

But past rc2 is not a time to start such a change.

Still, I'd like your fix to be consistent across all of ARM. Can you change all the linker scripts used for build ARM targets? These are, according to an ugly mix of cat LOG/*.MAKELOG, sed, grep and sort -u:

arch/arm/cpu/arm1136/u-boot-spl.lds
arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds
arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds
arch/arm/cpu/armv7/am33xx/u-boot-spl.lds
arch/arm/cpu/armv7/omap-common/u-boot-spl.lds
arch/arm/cpu/armv7/socfpga/u-boot-spl.lds
arch/arm/cpu/ixp/u-boot.lds
arch/arm/cpu/u-boot.lds
arch/arm/cpu/u-boot-spl.lds
board/actux1/u-boot.lds
board/actux2/u-boot.lds
board/actux3/u-boot.lds

Quoted 8 lines

board/ait/cam_enc_4xx/u-boot-spl.lds
board/davinci/da8xxevm/u-boot-spl-da850evm.lds
board/davinci/da8xxevm/u-boot-spl-hawk.lds
board/dvlhost/u-boot.lds
board/freescale/mx31ads/u-boot.lds
board/samsung/common/exynos-uboot-spl.lds
board/ti/am335x/u-boot.lds
board/vpac270/u-boot-spl.lds

Quoted 2 lines

Honestly for me is much easier just fix our timer code not to use this section instead of trying to fix 3rd party platforms.

I was only asking. I did not intend to force any work upon you. As I said, we're past -rc2.

So, I'll just pick it as-is. Will your timer code go into mainline soon? This would ensure that a build failure would be detected immediately if the change was reverted by any later commit such as the "make a full ELF and a slashed .bin" change I have mentioned.

Quoted 1 line

Is there any reason why too many linkers scripts are in u-boot for ARM?

Yes: copy-paste. :)

More seriously, when start.o files started popping in different places for different ARM targets, this was handled by duplicating .lds files and changing the start.o location in each .lds. Then it got worse when some targets starting needing different memory region mappings.

I am working on reducing both the start.o and lds mess. I was initially aiming for 2013.10, will do it for 2014.01.

Quoted 2 lines

Thanks,
Michal

Amicalement,

Signature · 1 line
Albert.
#4 lore raw

PATCH 1/1 arm: lds: Remove libgcc eabi exception handling tables

Hi,

Quoted 108 lines · Albert ARIBAUD

Hi Michal,

Quoted 100 lines · Michal Simek

Hi Albert,

Quoted 88 lines · Albert ARIBAUD

Hi Michal,

Quoted 45 lines · Michal Simek

Remove ARM eabi exception handling tables (for frame unwinding). AFAICT, u-boot stubs away the frame unwiding routines, so the tables will more or less just consume space. It should be OK to remove them.

---
This patch was sent to ML as RFC (May 9)

Here is the origin response in connection to this patch.

Ok, so Michal and I just did some fiddling with zynq builds and *exidx* sections.

By default the *exidx* sections are between rodata and data, so removing them causes many apparent changes at the binary level. However, builds of zynq based on ARM master with the patch above vs master with a patch mapping *exidx* sections after BSS gives identical binaries. Thus the RFC has no functional effect.

Also, ARM EHABI states that [exception] Tables are not required for ABI compliance at the C/Assembler level but are required for C++.

http://infocenter.arm.com/help/topic/com.arm.doc.ihi0038a/IHI0038A_ehabi.pdf

So as long as we don't put any C++ code in U-Boot (a prospect that I don't see happening any time soon), this RFC is safe and either is a no-op or removes useless bytes from the binary.

---
 arch/arm/cpu/u-boot.lds | 2 ++
 1 file changed, 2 insertions(+)
arch/arm/cpu/u-boot.lds +2 -1
index 3037885..8894c8a 100644
@@ -113,4 +113,6 @@ SECTIONS
 	/DISCARD/ : { *(.plt*) }
 	/DISCARD/ : { *(.interp*) }
 	/DISCARD/ : { *(.gnu*) }
+	/DISCARD/ : { *(.ARM.exidx*) }
+	/DISCARD/ : { *(.gnu.linkonce.armexidx.*) }
 }
--
Quoted 2 lines

1.8.2.3

The good news is, it applies and does not cause any build issues.

The less good news is, arch/arm/cpu/u-boot.lds is not the only linker script file to fix if we want to fix it this way.

The fact is, I am not sure removing sections from the ELF filein order to avoid them being in the binary is actually the right way to go. I have recently had to 'un-discard' some sections in order for 'offline' debugging tools to properly understand the ELF file.

So I am wondering if we should not stop using /DISCARD/ and start using $(CROSS_COMPILE)objcopy options (-j or --strip-* and --remove-section).

This way, the ELF file would be as complete as any debug tool might expect it (e.g. objdump, especially when debugging relocation issues) yet the binary file would remain unchanged.

But past rc2 is not a time to start such a change.

Still, I'd like your fix to be consistent across all of ARM. Can you change all the linker scripts used for build ARM targets? These are, according to an ugly mix of cat LOG/*.MAKELOG, sed, grep and sort -u:

arch/arm/cpu/arm1136/u-boot-spl.lds
arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds
arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds
arch/arm/cpu/armv7/am33xx/u-boot-spl.lds
arch/arm/cpu/armv7/omap-common/u-boot-spl.lds
arch/arm/cpu/armv7/socfpga/u-boot-spl.lds
arch/arm/cpu/ixp/u-boot.lds
arch/arm/cpu/u-boot.lds
arch/arm/cpu/u-boot-spl.lds
board/actux1/u-boot.lds
board/actux2/u-boot.lds
board/actux3/u-boot.lds

Quoted 8 lines

board/ait/cam_enc_4xx/u-boot-spl.lds
board/davinci/da8xxevm/u-boot-spl-da850evm.lds
board/davinci/da8xxevm/u-boot-spl-hawk.lds
board/dvlhost/u-boot.lds
board/freescale/mx31ads/u-boot.lds
board/samsung/common/exynos-uboot-spl.lds
board/ti/am335x/u-boot.lds
board/vpac270/u-boot-spl.lds

Quoted 2 lines

Honestly for me is much easier just fix our timer code not to use this section instead of trying to fix 3rd party platforms.

Quoted 7 lines

I was only asking. I did not intend to force any work upon you. As I said, we're past -rc2.

So, I'll just pick it as-is. Will your timer code go into mainline soon? This would ensure that a build failure would be detected immediately if the change was reverted by any later commit such as the "make a full ELF and a slashed .bin" change I have mentioned.

The timer code is there but only in one configuration there is this issue. It is not causing build failure. It is just when you create xilinx specific boot image then you face with this problem.

Quoted 4 lines
Quoted 2 lines

Is there any reason why too many linkers scripts are in u-boot for ARM?

Yes: copy-paste. :)

:-)

Quoted 4 lines

More seriously, when start.o files started popping in different places for different ARM targets, this was handled by duplicating .lds files and changing the start.o location in each .lds. Then it got worse when some targets starting needing different memory region mappings.

especially because of SPL.

Quoted 3 lines

I am working on reducing both the start.o and lds mess. I was initially aiming for 2013.10, will do it for 2014.01.

Great.

Thanks,
Michal

Signature · 14 lines
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/
Maintainer of Linux kernel - Xilinx Zynq ARM architecture
Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform


-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 263 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130906/6c289ab8/attachment.pgp>
#5 lore raw

PATCH 1/1 arm: lds: Remove libgcc eabi exception handling tables

In reply to Michal Simek

Hi Michal,

Quoted 45 lines · Michal Simek

Remove ARM eabi exception handling tables (for frame unwinding). AFAICT, u-boot stubs away the frame unwiding routines, so the tables will more or less just consume space. It should be OK to remove them.

---
This patch was sent to ML as RFC (May 9)

Here is the origin response in connection to this patch.

Ok, so Michal and I just did some fiddling with zynq builds and *exidx* sections.

By default the *exidx* sections are between rodata and data, so removing them causes many apparent changes at the binary level. However, builds of zynq based on ARM master with the patch above vs master with a patch mapping *exidx* sections after BSS gives identical binaries. Thus the RFC has no functional effect.

Also, ARM EHABI states that [exception] Tables are not required for ABI compliance at the C/Assembler level but are required for C++.

http://infocenter.arm.com/help/topic/com.arm.doc.ihi0038a/IHI0038A_ehabi.pdf

So as long as we don't put any C++ code in U-Boot (a prospect that I don't see happening any time soon), this RFC is safe and either is a no-op or removes useless bytes from the binary.

---
 arch/arm/cpu/u-boot.lds | 2 ++
 1 file changed, 2 insertions(+)
arch/arm/cpu/u-boot.lds +2 -1
index 3037885..8894c8a 100644
@@ -113,4 +113,6 @@ SECTIONS
 	/DISCARD/ : { *(.plt*) }
 	/DISCARD/ : { *(.interp*) }
 	/DISCARD/ : { *(.gnu*) }
+	/DISCARD/ : { *(.ARM.exidx*) }
+	/DISCARD/ : { *(.gnu.linkonce.armexidx.*) }
 }
--
Quoted 2 lines

1.8.2.3

Applied to u-boot-arm/master, thanks!

Amicalement,

Signature · 1 line
Albert.
#6 lore raw

PATCH 1/1 arm: lds: Remove libgcc eabi exception handling tables

Quoted 38 lines · Albert ARIBAUD

Hi Michal,

Quoted 33 lines · Michal Simek

Remove ARM eabi exception handling tables (for frame unwinding). AFAICT, u-boot stubs away the frame unwiding routines, so the tables will more or less just consume space. It should be OK to remove them.

---
This patch was sent to ML as RFC (May 9)

Here is the origin response in connection to this patch.

Ok, so Michal and I just did some fiddling with zynq builds and *exidx* sections.

By default the *exidx* sections are between rodata and data, so removing them causes many apparent changes at the binary level. However, builds of zynq based on ARM master with the patch above vs master with a patch mapping *exidx* sections after BSS gives identical binaries. Thus the RFC has no functional effect.

Also, ARM EHABI states that [exception] Tables are not required for ABI compliance at the C/Assembler level but are required for C++.

http://infocenter.arm.com/help/topic/com.arm.doc.ihi0038a/IHI0038A_ehabi.pdf

So as long as we don't put any C++ code in U-Boot (a prospect that I don't see happening any time soon), this RFC is safe and either is a no-op or removes useless bytes from the binary.

---
 arch/arm/cpu/u-boot.lds | 2 ++
 1 file changed, 2 insertions(+)
Quoted 17 lines
Quoted 12 lines
arch/arm/cpu/u-boot.lds +2 -1
index 3037885..8894c8a 100644
@@ -113,4 +113,6 @@ SECTIONS
 	/DISCARD/ : { *(.plt*) }
 	/DISCARD/ : { *(.interp*) }
 	/DISCARD/ : { *(.gnu*) }
+	/DISCARD/ : { *(.ARM.exidx*) }
+	/DISCARD/ : { *(.gnu.linkonce.armexidx.*) }
 }
--
Quoted 2 lines

1.8.2.3

Applied to u-boot-arm/master, thanks!

Ok. Thanks,
Michal

Signature · 14 lines
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/
Maintainer of Linux kernel - Xilinx Zynq ARM architecture
Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform


-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 263 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130906/f590099a/attachment.pgp>