Skip to contentSkip to conversation

ath10k: boot, bmi and mac debug message cleanup

PATCH Applied Kalle Valo 1 participant 10 messages Sep 8, 2013 – Sep 12, 2013 Qualcomm Atheros ATH10K wireless driver

lore
Share & tools
lore

Kalle Valo

author
#0 lore raw

cover ath10k: boot, bmi and mac debug message cleanup

Simple message log cleanup. Please review.

---

Kalle Valo (8):
ath10k: add BMI log level
ath10k: rename ATH10K_DBG_CORE to BOOT
ath10k: cleanup debug messages in core.c
ath10k: add boot debug messages to pci.c and ce.c
ath10k: add boot debug messages to htc.c
ath10k: add boot messages to htt.c
ath10k: clean mac.c debug messages
ath10k: print phymode as a string

 drivers/net/wireless/ath/ath10k/bmi.c    |   42 ++++---
 drivers/net/wireless/ath/ath10k/ce.c     |    8 +
 drivers/net/wireless/ath/ath10k/core.c   |   11 +-
 drivers/net/wireless/ath/ath10k/debug.h  |    3 
 drivers/net/wireless/ath/ath10k/htc.c    |   16 +--
 drivers/net/wireless/ath/ath10k/htt_rx.c |    2 
 drivers/net/wireless/ath/ath10k/htt_tx.c |    2 
 drivers/net/wireless/ath/ath10k/mac.c    |  185 ++++++++++++++++--------------
 drivers/net/wireless/ath/ath10k/pci.c    |    6 +
 drivers/net/wireless/ath/ath10k/wmi.h    |   42 +++++++
 10 files changed, 197 insertions(+), 120 deletions(-)
author
#1 lore raw

PATCH 1/8 ath10k: add BMI log level

Also clean BMI log messages and add few more.

---
 drivers/net/wireless/ath/ath10k/bmi.c   |   42 ++++++++++++++++++++-----------
 drivers/net/wireless/ath/ath10k/debug.h |    1 +
 2 files changed, 28 insertions(+), 15 deletions(-)
drivers/net/wireless/ath/ath10k/bmi.c +27 -15
index 744da6d..a1f0996 100644
@@ -22,7 +22,8 @@
 
 void ath10k_bmi_start(struct ath10k *ar)
 {
-	ath10k_dbg(ATH10K_DBG_CORE, "BMI started\n");
+	ath10k_dbg(ATH10K_DBG_BMI, "bmi start\n");
+
 	ar->bmi.done_sent = false;
 }
 
@@ -32,8 +33,10 @@ int ath10k_bmi_done(struct ath10k *ar)
 	u32 cmdlen = sizeof(cmd.id) + sizeof(cmd.done);
 	int ret;
 
+	ath10k_dbg(ATH10K_DBG_BMI, "bmi done\n");
+
 	if (ar->bmi.done_sent) {
-		ath10k_dbg(ATH10K_DBG_CORE, "%s skipped\n", __func__);
+		ath10k_dbg(ATH10K_DBG_BMI, "bmi skipped\n");
 		return 0;
 	}
 
@@ -46,7 +49,6 @@ int ath10k_bmi_done(struct ath10k *ar)
 		return ret;
 	}
 
-	ath10k_dbg(ATH10K_DBG_CORE, "BMI done\n");
 	return 0;
 }
 
@@ -59,6 +61,8 @@ int ath10k_bmi_get_target_info(struct ath10k *ar,
 	u32 resplen = sizeof(resp.get_target_info);
 	int ret;
 
+	ath10k_dbg(ATH10K_DBG_BMI, "bmi get target info\n");
+
 	if (ar->bmi.done_sent) {
 		ath10k_warn("BMI Get Target Info Command disallowed\n");
 		return -EBUSY;
@@ -80,6 +84,7 @@ int ath10k_bmi_get_target_info(struct ath10k *ar,
 
 	target_info->version = __le32_to_cpu(resp.get_target_info.version);
 	target_info->type    = __le32_to_cpu(resp.get_target_info.type);
+
 	return 0;
 }
 
@@ -92,15 +97,14 @@ int ath10k_bmi_read_memory(struct ath10k *ar,
 	u32 rxlen;
 	int ret;
 
+	ath10k_dbg(ATH10K_DBG_BMI, "bmi read address 0x%x length %d\n",
+		   address, length);
+
 	if (ar->bmi.done_sent) {
 		ath10k_warn("command disallowed\n");
 		return -EBUSY;
 	}
 
-	ath10k_dbg(ATH10K_DBG_CORE,
-		   "%s: (device: 0x%p, address: 0x%x, length: %d)\n",
-		   __func__, ar, address, length);
-
 	while (length) {
 		rxlen = min_t(u32, length, BMI_MAX_DATA_SIZE);
 
@@ -133,15 +137,14 @@ int ath10k_bmi_write_memory(struct ath10k *ar,
 	u32 txlen;
 	int ret;
 
+	ath10k_dbg(ATH10K_DBG_BMI, "bmi write address 0x%x length %d\n",
+		   address, length);
+
 	if (ar->bmi.done_sent) {
 		ath10k_warn("command disallowed\n");
 		return -EBUSY;
 	}
 
-	ath10k_dbg(ATH10K_DBG_CORE,
-		   "%s: (device: 0x%p, address: 0x%x, length: %d)\n",
-		   __func__, ar, address, length);
-
 	while (length) {
 		txlen = min(length, BMI_MAX_DATA_SIZE - hdrlen);
 
@@ -180,15 +183,14 @@ int ath10k_bmi_execute(struct ath10k *ar, u32 address, u32 *param)
 	u32 resplen = sizeof(resp.execute);
 	int ret;
 
+	ath10k_dbg(ATH10K_DBG_BMI, "bmi execute address 0x%x param 0x%x\n",
+		   address, *param);
+
 	if (ar->bmi.done_sent) {
 		ath10k_warn("command disallowed\n");
 		return -EBUSY;
 	}
 
-	ath10k_dbg(ATH10K_DBG_CORE,
-		   "%s: (device: 0x%p, address: 0x%x, param: %d)\n",
-		   __func__, ar, address, *param);
-
 	cmd.id            = __cpu_to_le32(BMI_EXECUTE);
 	cmd.execute.addr  = __cpu_to_le32(address);
 	cmd.execute.param = __cpu_to_le32(*param);
@@ -216,6 +218,9 @@ int ath10k_bmi_lz_data(struct ath10k *ar, const void *buffer, u32 length)
 	u32 txlen;
 	int ret;
 
+	ath10k_dbg(ATH10K_DBG_BMI, "bmi lz data buffer 0x%p length %d\n",
+		   buffer, length);
+
 	if (ar->bmi.done_sent) {
 		ath10k_warn("command disallowed\n");
 		return -EBUSY;
@@ -250,6 +255,9 @@ int ath10k_bmi_lz_stream_start(struct ath10k *ar, u32 address)
 	u32 cmdlen = sizeof(cmd.id) + sizeof(cmd.lz_start);
 	int ret;
 
+	ath10k_dbg(ATH10K_DBG_BMI, "bmi lz stream start address 0x%x\n",
+		   address);
+
 	if (ar->bmi.done_sent) {
 		ath10k_warn("command disallowed\n");
 		return -EBUSY;
@@ -275,6 +283,10 @@ int ath10k_bmi_fast_download(struct ath10k *ar,
 	u32 trailer_len = length - head_len;
 	int ret;
 
+	ath10k_dbg(ATH10K_DBG_BMI,
+		   "bmi fast download address 0x%x buffer 0x%p length %d\n",
+		   address, buffer, length);
+
 	ret = ath10k_bmi_lz_stream_start(ar, address);
 	if (ret)
 		return ret;
drivers/net/wireless/ath/ath10k/debug.h +1 -0
index 9c442a8..dfa3070 100644
@@ -32,6 +32,7 @@ enum ath10k_debug_mask {
 	ATH10K_DBG_HTT_DUMP	= 0x00000080,
 	ATH10K_DBG_MGMT		= 0x00000100,
 	ATH10K_DBG_DATA		= 0x00000200,
+	ATH10K_DBG_BMI		= 0x00000400,
 	ATH10K_DBG_ANY		= 0xffffffff,
 };
 
author
#2 lore raw

PATCH 2/8 ath10k: rename ATH10K_DBG_CORE to BOOT

In reply to Kalle Valo

core.c mostly deals with driver and firmware starting related actions. And we can use the boot level also in other components, like PCI and HTT.

---
 drivers/net/wireless/ath/ath10k/core.c  |    6 +++---
 drivers/net/wireless/ath/ath10k/debug.h |    2 +-
 2 files changed, 4 insertions(+), 4 deletions(-)
drivers/net/wireless/ath/ath10k/core.c +3 -3
index 8a68839..0ed60fd 100644
@@ -53,7 +53,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 
 static void ath10k_send_suspend_complete(struct ath10k *ar)
 {
-	ath10k_dbg(ATH10K_DBG_CORE, "%s\n", __func__);
+	ath10k_dbg(ATH10K_DBG_BOOT, "%s\n", __func__);
 
 	ar->is_target_paused = true;
 	wake_up(&ar->event_queue);
@@ -101,7 +101,7 @@ static int ath10k_init_connect_htc(struct ath10k *ar)
 		goto timeout;
 	}
 
-	ath10k_dbg(ATH10K_DBG_CORE, "core wmi ready\n");
+	ath10k_dbg(ATH10K_DBG_BOOT, "core wmi ready\n");
 	return 0;
 
 timeout:
@@ -203,7 +203,7 @@ static int ath10k_push_board_ext_data(struct ath10k *ar,
 		return ret;
 	}
 
-	ath10k_dbg(ATH10K_DBG_CORE,
+	ath10k_dbg(ATH10K_DBG_BOOT,
 		   "ath10k: Board extended Data download addr: 0x%x\n",
 		   board_ext_data_addr);
 
drivers/net/wireless/ath/ath10k/debug.h +1 -1
index dfa3070..4bef061 100644
@@ -27,7 +27,7 @@ enum ath10k_debug_mask {
 	ATH10K_DBG_HTC		= 0x00000004,
 	ATH10K_DBG_HTT		= 0x00000008,
 	ATH10K_DBG_MAC		= 0x00000010,
-	ATH10K_DBG_CORE		= 0x00000020,
+	ATH10K_DBG_BOOT		= 0x00000020,
 	ATH10K_DBG_PCI_DUMP	= 0x00000040,
 	ATH10K_DBG_HTT_DUMP	= 0x00000080,
 	ATH10K_DBG_MGMT		= 0x00000100,
author
#3 lore raw

PATCH 3/8 ath10k: cleanup debug messages in core.c

In reply to Kalle Valo

Fix them to follow the general logging style in ath10k.

While at it, add print id chip_id to the debug log.

---
 drivers/net/wireless/ath/ath10k/core.c |    9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)
drivers/net/wireless/ath/ath10k/core.c +6 -3
index 0ed60fd..76906d5 100644
@@ -53,7 +53,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 
 static void ath10k_send_suspend_complete(struct ath10k *ar)
 {
-	ath10k_dbg(ATH10K_DBG_BOOT, "%s\n", __func__);
+	ath10k_dbg(ATH10K_DBG_BOOT, "boot suspend complete\n");
 
 	ar->is_target_paused = true;
 	wake_up(&ar->event_queue);
@@ -101,7 +101,7 @@ static int ath10k_init_connect_htc(struct ath10k *ar)
 		goto timeout;
 	}
 
-	ath10k_dbg(ATH10K_DBG_BOOT, "core wmi ready\n");
+	ath10k_dbg(ATH10K_DBG_BOOT, "boot wmi ready\n");
 	return 0;
 
 timeout:
@@ -204,7 +204,7 @@ static int ath10k_push_board_ext_data(struct ath10k *ar,
 	}
 
 	ath10k_dbg(ATH10K_DBG_BOOT,
-		   "ath10k: Board extended Data download addr: 0x%x\n",
+		   "boot push board extended data addr 0x%x\n",
 		   board_ext_data_addr);
 
 	if (board_ext_data_addr == 0)
@@ -722,6 +722,9 @@ static int ath10k_core_check_chip_id(struct ath10k *ar)
 {
 	u32 hw_revision = MS(ar->chip_id, SOC_CHIP_ID_REV);
 
+	ath10k_dbg(ATH10K_DBG_BOOT, "boot chip_id 0x%08x hw_revision 0x%x\n",
+		   ar->chip_id, hw_revision);
+
 	/* Check that we are not using hw1.0 (some of them have same pci id
 	 * as hw2.0) before doing anything else as ath10k crashes horribly
 	 * due to missing hw1.0 workarounds. */
author
#4 lore raw

PATCH 4/8 ath10k: add boot debug messages to pci.c and ce.c

In reply to Kalle Valo

To unify all boot related debug messages into one debug level.

---
 drivers/net/wireless/ath/ath10k/ce.c  |    8 ++++++++
 drivers/net/wireless/ath/ath10k/pci.c |    6 ++++--
 2 files changed, 12 insertions(+), 2 deletions(-)
drivers/net/wireless/ath/ath10k/ce.c +8 -0
index afe5df4..38c2571 100644
@@ -1010,6 +1010,10 @@ static int ath10k_ce_init_src_ring(struct ath10k *ar,
 	ath10k_ce_src_ring_lowmark_set(ar, ctrl_addr, 0);
 	ath10k_ce_src_ring_highmark_set(ar, ctrl_addr, nentries);
 
+	ath10k_dbg(ATH10K_DBG_BOOT,
+		   "boot ce src ring id %d entries %d base_addr %p\n",
+		   ce_id, nentries, src_ring->base_addr_owner_space);
+
 	return 0;
 }
 
@@ -1091,6 +1095,10 @@ static int ath10k_ce_init_dest_ring(struct ath10k *ar,
 	ath10k_ce_dest_ring_lowmark_set(ar, ctrl_addr, 0);
 	ath10k_ce_dest_ring_highmark_set(ar, ctrl_addr, nentries);
 
+	ath10k_dbg(ATH10K_DBG_BOOT,
+		   "boot ce dest ring id %d entries %d base_addr %p\n",
+		   ce_id, nentries, dest_ring->base_addr_owner_space);
+
 	return 0;
 }
 
drivers/net/wireless/ath/ath10k/pci.c +4 -2
index 880fcd0d..503a8c170 100644
@@ -2375,10 +2375,10 @@ static void ath10k_pci_dump_features(struct ath10k_pci *ar_pci)
 
 		switch (i) {
 		case ATH10K_PCI_FEATURE_MSI_X:
-			ath10k_dbg(ATH10K_DBG_PCI, "device supports MSI-X\n");
+			ath10k_dbg(ATH10K_DBG_BOOT, "device supports MSI-X\n");
 			break;
 		case ATH10K_PCI_FEATURE_SOC_POWER_SAVE:
-			ath10k_dbg(ATH10K_DBG_PCI, "QCA98XX SoC power save enabled\n");
+			ath10k_dbg(ATH10K_DBG_BOOT, "QCA98XX SoC power save enabled\n");
 			break;
 		}
 	}
@@ -2504,6 +2504,8 @@ static int ath10k_pci_probe(struct pci_dev *pdev,
 
 	ath10k_do_pci_sleep(ar);
 
+	ath10k_dbg(ATH10K_DBG_BOOT, "boot pci_mem 0x%p\n", ar_pci->mem);
+
 	ret = ath10k_core_register(ar, chip_id);
 	if (ret) {
 		ath10k_err("could not register driver core (%d)\n", ret);
author
#5 lore raw

PATCH 5/8 ath10k: add boot debug messages to htc.c

In reply to Kalle Valo

To unify the boot debug level.

---
 drivers/net/wireless/ath/ath10k/htc.c |   16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)
drivers/net/wireless/ath/ath10k/htc.c +8 -8
index 7d445d3..f03fd8d 100644
@@ -752,8 +752,8 @@ int ath10k_htc_connect_service(struct ath10k_htc *htc,
 	tx_alloc = ath10k_htc_get_credit_allocation(htc,
 						    conn_req->service_id);
 	if (!tx_alloc)
-		ath10k_dbg(ATH10K_DBG_HTC,
-			   "HTC Service %s does not allocate target credits\n",
+		ath10k_dbg(ATH10K_DBG_BOOT,
+			   "boot htc service %s does not allocate target credits\n",
 			   htc_service_name(conn_req->service_id));
 
 	skb = ath10k_htc_build_tx_ctrl_skb(htc->ar);
@@ -873,19 +873,19 @@ setup:
 	if (status)
 		return status;
 
-	ath10k_dbg(ATH10K_DBG_HTC,
-		   "HTC service: %s UL pipe: %d DL pipe: %d eid: %d ready\n",
+	ath10k_dbg(ATH10K_DBG_BOOT,
+		   "boot htc service '%s' ul pipe %d dl pipe %d eid %d ready\n",
 		   htc_service_name(ep->service_id), ep->ul_pipe_id,
 		   ep->dl_pipe_id, ep->eid);
 
-	ath10k_dbg(ATH10K_DBG_HTC,
-		   "EP %d UL polled: %d, DL polled: %d\n",
+	ath10k_dbg(ATH10K_DBG_BOOT,
+		   "boot htc ep %d ul polled %d dl polled %d\n",
 		   ep->eid, ep->ul_is_polled, ep->dl_is_polled);
 
 	if (disable_credit_flow_ctrl && ep->tx_credit_flow_enabled) {
 		ep->tx_credit_flow_enabled = false;
-		ath10k_dbg(ATH10K_DBG_HTC,
-			   "HTC service: %s eid: %d TX flow control disabled\n",
+		ath10k_dbg(ATH10K_DBG_BOOT,
+			   "boot htc service '%s' eid %d TX flow control disabled\n",
 			   htc_service_name(ep->service_id), assigned_eid);
 	}
 
author
#6 lore raw

PATCH 6/8 ath10k: add boot messages to htt.c

In reply to Kalle Valo

To unify the boot debug level.

---
 drivers/net/wireless/ath/ath10k/htt_rx.c |    2 +-
 drivers/net/wireless/ath/ath10k/htt_tx.c |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)
drivers/net/wireless/ath/ath10k/htt_rx.c +1 -1
index af31d2f..a39fbf4 100644
@@ -502,7 +502,7 @@ int ath10k_htt_rx_attach(struct ath10k_htt *htt)
 	if (__ath10k_htt_rx_ring_fill_n(htt, htt->rx_ring.fill_level))
 		goto err_fill_ring;
 
-	ath10k_dbg(ATH10K_DBG_HTT, "HTT RX ring size: %d, fill_level: %d\n",
+	ath10k_dbg(ATH10K_DBG_BOOT, "htt rx ring size %d fill_level %d\n",
 		   htt->rx_ring.size, htt->rx_ring.fill_level);
 	return 0;
 
drivers/net/wireless/ath/ath10k/htt_tx.c +1 -1
index b6b1420..4548128 100644
@@ -96,7 +96,7 @@ int ath10k_htt_tx_attach(struct ath10k_htt *htt)
 	htt->max_num_pending_tx = ath10k_hif_get_free_queue_number(htt->ar,
 								   pipe);
 
-	ath10k_dbg(ATH10K_DBG_HTT, "htt tx max num pending tx %d\n",
+	ath10k_dbg(ATH10K_DBG_BOOT, "htt tx max num pending tx %d\n",
 		   htt->max_num_pending_tx);
 
 	htt->pending_tx = kzalloc(sizeof(*htt->pending_tx) *
author
#7 lore raw

PATCH 7/8 ath10k: clean mac.c debug messages

In reply to Kalle Valo

Just to unify with the rest of debug messages. Minimal functional changes, only major ones are removal of the awkward "else" style in debug messages.

---
 drivers/net/wireless/ath/ath10k/mac.c |  180 +++++++++++++++++----------------
 1 file changed, 92 insertions(+), 88 deletions(-)
drivers/net/wireless/ath/ath10k/mac.c +92 -88
index 248248b..b8c81bb 100644
@@ -604,7 +604,7 @@ static int ath10k_monitor_create(struct ath10k *ar)
 		goto vdev_fail;
 	}
 
-	ath10k_dbg(ATH10K_DBG_MAC, "Monitor interface created, vdev id: %d\n",
+	ath10k_dbg(ATH10K_DBG_MAC, "mac monitor vdev %d created\n",
 		   ar->monitor_vdev_id);
 
 	ar->monitor_present = true;
@@ -636,7 +636,7 @@ static int ath10k_monitor_destroy(struct ath10k *ar)
 	ar->free_vdev_map |= 1 << (ar->monitor_vdev_id);
 	ar->monitor_present = false;
 
-	ath10k_dbg(ATH10K_DBG_MAC, "Monitor interface destroyed, vdev id: %d\n",
+	ath10k_dbg(ATH10K_DBG_MAC, "mac monitor vdev %d deleted\n",
 		   ar->monitor_vdev_id);
 	return ret;
 }
@@ -665,7 +665,7 @@ static void ath10k_control_beaconing(struct ath10k_vif *arvif,
 			    arvif->vdev_id);
 		return;
 	}
-	ath10k_dbg(ATH10K_DBG_MAC, "VDEV: %d up\n", arvif->vdev_id);
+	ath10k_dbg(ATH10K_DBG_MAC, "mac vdev %d up\n", arvif->vdev_id);
 }
 
 static void ath10k_control_ibss(struct ath10k_vif *arvif,
@@ -749,14 +749,14 @@ static void ath10k_ps_iter(void *data, u8 *mac, struct ieee80211_vif *vif)
 		psmode = WMI_STA_PS_MODE_DISABLED;
 	}
 
+	ath10k_dbg(ATH10K_DBG_MAC, "mac vdev %d psmode %s\n",
+		   arvif->vdev_id, psmode ? "enable" : "disable");
+
 	ar_iter->ret = ath10k_wmi_set_psmode(ar_iter->ar, arvif->vdev_id,
 					     psmode);
 	if (ar_iter->ret)
 		ath10k_warn("Failed to set PS Mode: %d for VDEV: %d\n",
 			    psmode, arvif->vdev_id);
-	else
-		ath10k_dbg(ATH10K_DBG_MAC, "Set PS Mode: %d for VDEV: %d\n",
-			   psmode, arvif->vdev_id);
 }
 
 /**********************/
@@ -946,7 +946,8 @@ static void ath10k_peer_assoc_h_ht(struct ath10k *ar,
 	arg->peer_ht_rates.num_rates = n;
 	arg->peer_num_spatial_streams = max((n+7) / 8, 1);
 
-	ath10k_dbg(ATH10K_DBG_MAC, "mcs cnt %d nss %d\n",
+	ath10k_dbg(ATH10K_DBG_MAC, "mac ht peer %pM mcs cnt %d nss %d\n",
+		   arg->addr,
 		   arg->peer_ht_rates.num_rates,
 		   arg->peer_num_spatial_streams);
 }
@@ -966,7 +967,7 @@ static void ath10k_peer_assoc_h_qos_ap(struct ath10k *ar,
 		arg->peer_flags |= WMI_PEER_QOS;
 
 	if (sta->wme && sta->uapsd_queues) {
-		ath10k_dbg(ATH10K_DBG_MAC, "uapsd_queues: 0x%X, max_sp: %d\n",
+		ath10k_dbg(ATH10K_DBG_MAC, "mac uapsd_queues 0x%x max_sp %d\n",
 			   sta->uapsd_queues, sta->max_sp);
 
 		arg->peer_flags |= WMI_PEER_APSD;
@@ -1045,7 +1046,8 @@ static void ath10k_peer_assoc_h_vht(struct ath10k *ar,
 	arg->peer_vht_rates.tx_mcs_set =
 		__le16_to_cpu(vht_cap->vht_mcs.tx_mcs_map);
 
-	ath10k_dbg(ATH10K_DBG_MAC, "mac vht peer\n");
+	ath10k_dbg(ATH10K_DBG_MAC, "mac vht peer %pM max_mpdu %d flags 0x%x\n",
+		   sta->addr, arg->peer_max_mpdu, arg->peer_flags);
 }
 
 static void ath10k_peer_assoc_h_qos(struct ath10k *ar,
@@ -1102,6 +1104,9 @@ static void ath10k_peer_assoc_h_phymode(struct ath10k *ar,
 		break;
 	}
 
+	ath10k_dbg(ATH10K_DBG_MAC, "mac peer %pM phymode %d\n",
+		   sta->addr, phymode);
+
 	arg->peer_phymode = phymode;
 	WARN_ON(phymode == MODE_UNKNOWN);
 }
@@ -1159,15 +1164,15 @@ static void ath10k_bss_assoc(struct ieee80211_hw *hw,
 
 	rcu_read_unlock();
 
+	ath10k_dbg(ATH10K_DBG_MAC,
+		   "mac vdev %d up (associated) bssid %pM aid %d\n",
+		   arvif->vdev_id, bss_conf->bssid, bss_conf->aid);
+
 	ret = ath10k_wmi_vdev_up(ar, arvif->vdev_id, bss_conf->aid,
 				 bss_conf->bssid);
 	if (ret)
 		ath10k_warn("VDEV: %d up failed: ret %d\n",
 			    arvif->vdev_id, ret);
-	else
-		ath10k_dbg(ATH10K_DBG_MAC,
-			   "VDEV: %d associated, BSSID: %pM, AID: %d\n",
-			   arvif->vdev_id, bss_conf->bssid, bss_conf->aid);
 }
 
 /*
@@ -1188,10 +1193,11 @@ static void ath10k_bss_disassoc(struct ieee80211_hw *hw,
 	 * No idea why this happens, even though VDEV-DOWN is supposed
 	 * to be analogous to link down, so just stop the VDEV.
 	 */
+	ath10k_dbg(ATH10K_DBG_MAC, "mac vdev %d stop (disassociated\n",
+		   arvif->vdev_id);
+
+	/* FIXME: check return value */
 	ret = ath10k_vdev_stop(arvif);
-	if (!ret)
-		ath10k_dbg(ATH10K_DBG_MAC, "VDEV: %d stopped\n",
-			   arvif->vdev_id);
 
 	/*
 	 * If we don't call VDEV-DOWN after VDEV-STOP FW will remain active and
@@ -1200,10 +1206,10 @@ static void ath10k_bss_disassoc(struct ieee80211_hw *hw,
 	 * interfaces as it expects there is no rx when no interface is
 	 * running.
 	 */
+	ath10k_dbg(ATH10K_DBG_MAC, "mac vdev %d down\n", arvif->vdev_id);
+
+	/* FIXME: why don't we print error if wmi call fails? */
 	ret = ath10k_wmi_vdev_down(ar, arvif->vdev_id);
-	if (ret)
-		ath10k_dbg(ATH10K_DBG_MAC, "VDEV: %d ath10k_wmi_vdev_down failed (%d)\n",
-			   arvif->vdev_id, ret);
 
 	ath10k_wmi_flush_tx(ar);
 
@@ -1330,8 +1336,8 @@ static int ath10k_update_channel_list(struct ath10k *ar)
 				continue;
 
 			ath10k_dbg(ATH10K_DBG_WMI,
-				   "%s: [%zd/%d] freq %d maxpower %d regpower %d antenna %d mode %d\n",
-				   __func__, ch - arg.channels, arg.n_channels,
+				   "mac channel [%zd/%d] freq %d maxpower %d regpower %d antenna %d mode %d\n",
+				    ch - arg.channels, arg.n_channels,
 				   ch->freq, ch->max_power, ch->max_reg_power,
 				   ch->max_antenna_gain, ch->mode);
 
@@ -1431,7 +1437,8 @@ static void ath10k_tx_h_update_wep_key(struct sk_buff *skb)
 	if (key->keyidx == arvif->def_wep_key_index)
 		return;
 
-	ath10k_dbg(ATH10K_DBG_MAC, "new wep keyidx will be %d\n", key->keyidx);
+	ath10k_dbg(ATH10K_DBG_MAC, "mac vdev %d keyidx %d\n",
+		   arvif->vdev_id, key->keyidx);
 
 	ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id,
 					WMI_VDEV_PARAM_DEF_KEYID,
@@ -1534,7 +1541,7 @@ void ath10k_offchan_tx_work(struct work_struct *work)
 
 		mutex_lock(&ar->conf_mutex);
 
-		ath10k_dbg(ATH10K_DBG_MAC, "processing offchannel skb %p\n",
+		ath10k_dbg(ATH10K_DBG_MAC, "mac offchannel skb %p\n",
 			   skb);
 
 		hdr = (struct ieee80211_hdr *)skb->data;
@@ -1546,6 +1553,7 @@ void ath10k_offchan_tx_work(struct work_struct *work)
 		spin_unlock_bh(&ar->data_lock);
 
 		if (peer)
+			/* FIXME: should this use ath10k_warn()? */
 			ath10k_dbg(ATH10K_DBG_MAC, "peer %pM on vdev %d already present\n",
 				   peer_addr, vdev_id);
 
@@ -1886,7 +1894,7 @@ static int ath10k_config(struct ieee80211_hw *hw, u32 changed)
 	mutex_lock(&ar->conf_mutex);
 
 	if (changed & IEEE80211_CONF_CHANGE_CHANNEL) {
-		ath10k_dbg(ATH10K_DBG_MAC, "Config channel %d mhz\n",
+		ath10k_dbg(ATH10K_DBG_MAC, "mac config channel %d mhz\n",
 			   conf->chandef.chan->center_freq);
 		spin_lock_bh(&ar->data_lock);
 		ar->rx_channel = conf->chandef.chan;
@@ -1975,7 +1983,7 @@ static int ath10k_add_interface(struct ieee80211_hw *hw,
 		break;
 	}
 
-	ath10k_dbg(ATH10K_DBG_MAC, "Add interface: id %d type %d subtype %d\n",
+	ath10k_dbg(ATH10K_DBG_MAC, "mac vdev create %d (add interface) type %d subtype %d\n",
 		   arvif->vdev_id, arvif->vdev_type, arvif->vdev_subtype);
 
 	ret = ath10k_wmi_vdev_create(ar, arvif->vdev_id, arvif->vdev_type,
@@ -2054,8 +2062,6 @@ static void ath10k_remove_interface(struct ieee80211_hw *hw,
 
 	mutex_lock(&ar->conf_mutex);
 
-	ath10k_dbg(ATH10K_DBG_MAC, "Remove interface: id %d\n", arvif->vdev_id);
-
 	ar->free_vdev_map |= 1 << (arvif->vdev_id);
 
 	if (arvif->vdev_type == WMI_VDEV_TYPE_AP) {
@@ -2066,6 +2072,9 @@ static void ath10k_remove_interface(struct ieee80211_hw *hw,
 		kfree(arvif->u.ap.noa_data);
 	}
 
+	ath10k_dbg(ATH10K_DBG_MAC, "mac vdev delete %d (remove interface)\n",
+		   arvif->vdev_id);
+
 	ret = ath10k_wmi_vdev_delete(ar, arvif->vdev_id);
 	if (ret)
 		ath10k_warn("WMI vdev delete failed: %d\n", ret);
@@ -2107,18 +2116,20 @@ static void ath10k_configure_filter(struct ieee80211_hw *hw,
 
 	if ((ar->filter_flags & FIF_PROMISC_IN_BSS) &&
 	    !ar->monitor_enabled) {
+		ath10k_dbg(ATH10K_DBG_MAC, "mac monitor %d start\n",
+			   ar->monitor_vdev_id);
+
 		ret = ath10k_monitor_start(ar, ar->monitor_vdev_id);
 		if (ret)
 			ath10k_warn("Unable to start monitor mode\n");
-		else
-			ath10k_dbg(ATH10K_DBG_MAC, "Monitor mode started\n");
 	} else if (!(ar->filter_flags & FIF_PROMISC_IN_BSS) &&
 		   ar->monitor_enabled) {
+		ath10k_dbg(ATH10K_DBG_MAC, "mac monitor %d stop\n",
+			   ar->monitor_vdev_id);
+
 		ret = ath10k_monitor_stop(ar);
 		if (ret)
 			ath10k_warn("Unable to stop monitor mode\n");
-		else
-			ath10k_dbg(ATH10K_DBG_MAC, "Monitor mode stopped\n");
 	}
 
 	mutex_unlock(&ar->conf_mutex);
@@ -2143,41 +2154,41 @@ static void ath10k_bss_info_changed(struct ieee80211_hw *hw,
 		ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id,
 						WMI_VDEV_PARAM_BEACON_INTERVAL,
 						arvif->beacon_interval);
+		ath10k_dbg(ATH10K_DBG_MAC,
+			   "mac vdev %d beacon_interval %d\n",
+			   arvif->vdev_id, arvif->beacon_interval);
+
 		if (ret)
 			ath10k_warn("Failed to set beacon interval for VDEV: %d\n",
 				    arvif->vdev_id);
-		else
-			ath10k_dbg(ATH10K_DBG_MAC,
-				   "Beacon interval: %d set for VDEV: %d\n",
-				   arvif->beacon_interval, arvif->vdev_id);
 	}
 
 	if (changed & BSS_CHANGED_BEACON) {
+		ath10k_dbg(ATH10K_DBG_MAC,
+			   "vdev %d set beacon tx mode to staggered\n",
+			   arvif->vdev_id);
+
 		ret = ath10k_wmi_pdev_set_param(ar,
 						WMI_PDEV_PARAM_BEACON_TX_MODE,
 						WMI_BEACON_STAGGERED_MODE);
 		if (ret)
 			ath10k_warn("Failed to set beacon mode for VDEV: %d\n",
 				    arvif->vdev_id);
-		else
-			ath10k_dbg(ATH10K_DBG_MAC,
-				   "Set staggered beacon mode for VDEV: %d\n",
-				   arvif->vdev_id);
 	}
 
 	if (changed & BSS_CHANGED_BEACON_INFO) {
 		arvif->dtim_period = info->dtim_period;
 
+		ath10k_dbg(ATH10K_DBG_MAC,
+			   "mac vdev %d dtim_period %d\n",
+			   arvif->vdev_id, arvif->dtim_period);
+
 		ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id,
 						WMI_VDEV_PARAM_DTIM_PERIOD,
 						arvif->dtim_period);
 		if (ret)
 			ath10k_warn("Failed to set dtim period for VDEV: %d\n",
 				    arvif->vdev_id);
-		else
-			ath10k_dbg(ATH10K_DBG_MAC,
-				   "Set dtim period: %d for VDEV: %d\n",
-				   arvif->dtim_period, arvif->vdev_id);
 	}
 
 	if (changed & BSS_CHANGED_SSID &&
@@ -2190,16 +2201,15 @@ static void ath10k_bss_info_changed(struct ieee80211_hw *hw,
 
 	if (changed & BSS_CHANGED_BSSID) {
 		if (!is_zero_ether_addr(info->bssid)) {
+			ath10k_dbg(ATH10K_DBG_MAC,
+				   "mac vdev %d create peer %pM\n",
+				   arvif->vdev_id, info->bssid);
+
 			ret = ath10k_peer_create(ar, arvif->vdev_id,
 						 info->bssid);
 			if (ret)
 				ath10k_warn("Failed to add peer: %pM for VDEV: %d\n",
 					    info->bssid, arvif->vdev_id);
-			else
-				ath10k_dbg(ATH10K_DBG_MAC,
-					   "Added peer: %pM for VDEV: %d\n",
-					   info->bssid, arvif->vdev_id);
-
 
 			if (vif->type == NL80211_IFTYPE_STATION) {
 				/*
@@ -2209,11 +2219,12 @@ static void ath10k_bss_info_changed(struct ieee80211_hw *hw,
 				memcpy(arvif->u.sta.bssid, info->bssid,
 				       ETH_ALEN);
 
+				ath10k_dbg(ATH10K_DBG_MAC,
+					   "mac vdev %d start %pM\n",
+					   arvif->vdev_id, info->bssid);
+
+				/* FIXME: check return value */
 				ret = ath10k_vdev_start(arvif);
-				if (!ret)
-					ath10k_dbg(ATH10K_DBG_MAC,
-						   "VDEV: %d started with BSSID: %pM\n",
-						   arvif->vdev_id, info->bssid);
 			}
 
 			/*
@@ -2237,16 +2248,15 @@ static void ath10k_bss_info_changed(struct ieee80211_hw *hw,
 		else
 			cts_prot = 0;
 
+		ath10k_dbg(ATH10K_DBG_MAC, "mac vdev %d cts_prot %d\n",
+			   arvif->vdev_id, cts_prot);
+
 		ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id,
 						WMI_VDEV_PARAM_ENABLE_RTSCTS,
 						cts_prot);
 		if (ret)
 			ath10k_warn("Failed to set CTS prot for VDEV: %d\n",
 				    arvif->vdev_id);
-		else
-			ath10k_dbg(ATH10K_DBG_MAC,
-				   "Set CTS prot: %d for VDEV: %d\n",
-				   cts_prot, arvif->vdev_id);
 	}
 
 	if (changed & BSS_CHANGED_ERP_SLOT) {
@@ -2257,16 +2267,15 @@ static void ath10k_bss_info_changed(struct ieee80211_hw *hw,
 		else
 			slottime = WMI_VDEV_SLOT_TIME_LONG; /* 20us */
 
+		ath10k_dbg(ATH10K_DBG_MAC, "mac vdev %d slot_time %d\n",
+			   arvif->vdev_id, slottime);
+
 		ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id,
 						WMI_VDEV_PARAM_SLOT_TIME,
 						slottime);
 		if (ret)
 			ath10k_warn("Failed to set erp slot for VDEV: %d\n",
 				    arvif->vdev_id);
-		else
-			ath10k_dbg(ATH10K_DBG_MAC,
-				   "Set slottime: %d for VDEV: %d\n",
-				   slottime, arvif->vdev_id);
 	}
 
 	if (changed & BSS_CHANGED_ERP_PREAMBLE) {
@@ -2276,16 +2285,16 @@ static void ath10k_bss_info_changed(struct ieee80211_hw *hw,
 		else
 			preamble = WMI_VDEV_PREAMBLE_LONG;
 
+		ath10k_dbg(ATH10K_DBG_MAC,
+			   "mac vdev %d preamble %dn",
+			   arvif->vdev_id, preamble);
+
 		ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id,
 						WMI_VDEV_PARAM_PREAMBLE,
 						preamble);
 		if (ret)
 			ath10k_warn("Failed to set preamble for VDEV: %d\n",
 				    arvif->vdev_id);
-		else
-			ath10k_dbg(ATH10K_DBG_MAC,
-				   "Set preamble: %d for VDEV: %d\n",
-				   preamble, arvif->vdev_id);
 	}
 
 	if (changed & BSS_CHANGED_ASSOC) {
@@ -2476,27 +2485,26 @@ static int ath10k_sta_state(struct ieee80211_hw *hw,
 		/*
 		 * New station addition.
 		 */
+		ath10k_dbg(ATH10K_DBG_MAC,
+			   "mac vdev %d peer create %pM (new sta)\n",
+			   arvif->vdev_id, sta->addr);
+
 		ret = ath10k_peer_create(ar, arvif->vdev_id, sta->addr);
 		if (ret)
 			ath10k_warn("Failed to add peer: %pM for VDEV: %d\n",
 				    sta->addr, arvif->vdev_id);
-		else
-			ath10k_dbg(ATH10K_DBG_MAC,
-				   "Added peer: %pM for VDEV: %d\n",
-				   sta->addr, arvif->vdev_id);
 	} else if ((old_state == IEEE80211_STA_NONE &&
 		    new_state == IEEE80211_STA_NOTEXIST)) {
 		/*
 		 * Existing station deletion.
 		 */
+		ath10k_dbg(ATH10K_DBG_MAC,
+			   "mac vdev %d peer delete %pM (sta gone)\n",
+			   arvif->vdev_id, sta->addr);
 		ret = ath10k_peer_delete(ar, arvif->vdev_id, sta->addr);
 		if (ret)
 			ath10k_warn("Failed to delete peer: %pM for VDEV: %d\n",
 				    sta->addr, arvif->vdev_id);
-		else
-			ath10k_dbg(ATH10K_DBG_MAC,
-				   "Removed peer: %pM for VDEV: %d\n",
-				   sta->addr, arvif->vdev_id);
 
 		if (vif->type == NL80211_IFTYPE_STATION)
 			ath10k_bss_disassoc(hw, vif);
@@ -2507,14 +2515,13 @@ static int ath10k_sta_state(struct ieee80211_hw *hw,
 		/*
 		 * New association.
 		 */
+		ath10k_dbg(ATH10K_DBG_MAC, "mac sta %pM associated\n",
+			   sta->addr);
+
 		ret = ath10k_station_assoc(ar, arvif, sta);
 		if (ret)
 			ath10k_warn("Failed to associate station: %pM\n",
 				    sta->addr);
-		else
-			ath10k_dbg(ATH10K_DBG_MAC,
-				   "Station %pM moved to assoc state\n",
-				   sta->addr);
 	} else if (old_state == IEEE80211_STA_ASSOC &&
 		   new_state == IEEE80211_STA_AUTH &&
 		   (vif->type == NL80211_IFTYPE_AP ||
@@ -2522,14 +2529,13 @@ static int ath10k_sta_state(struct ieee80211_hw *hw,
 		/*
 		 * Disassociation.
 		 */
+		ath10k_dbg(ATH10K_DBG_MAC, "mac sta %pM disassociated\n",
+			   sta->addr);
+
 		ret = ath10k_station_disassoc(ar, arvif, sta);
 		if (ret)
 			ath10k_warn("Failed to disassociate station: %pM\n",
 				    sta->addr);
-		else
-			ath10k_dbg(ATH10K_DBG_MAC,
-				   "Station %pM moved to disassociated state\n",
-				   sta->addr);
 	}
 
 	mutex_unlock(&ar->conf_mutex);
@@ -2749,14 +2755,13 @@ static void ath10k_set_rts_iter(void *data, u8 *mac, struct ieee80211_vif *vif)
 	if (ar_iter->ar->state == ATH10K_STATE_RESTARTED)
 		return;
 
+	ath10k_dbg(ATH10K_DBG_MAC, "mac vdev %d rts_threshold %d\n",
+		   arvif->vdev_id, rts);
+
 	ar_iter->ret = ath10k_mac_set_rts(arvif, rts);
 	if (ar_iter->ret)
 		ath10k_warn("Failed to set RTS threshold for VDEV: %d\n",
 			    arvif->vdev_id);
-	else
-		ath10k_dbg(ATH10K_DBG_MAC,
-			   "Set RTS threshold: %d for VDEV: %d\n",
-			   rts, arvif->vdev_id);
 }
 
 static int ath10k_set_rts_threshold(struct ieee80211_hw *hw, u32 value)
@@ -2791,14 +2796,13 @@ static void ath10k_set_frag_iter(void *data, u8 *mac, struct ieee80211_vif *vif)
 	if (ar_iter->ar->state == ATH10K_STATE_RESTARTED)
 		return;
 
+	ath10k_dbg(ATH10K_DBG_MAC, "mac vdev %d fragmentation_threshold %d\n",
+		   arvif->vdev_id, frag);
+
 	ar_iter->ret = ath10k_mac_set_frag(arvif, frag);
 	if (ar_iter->ret)
 		ath10k_warn("Failed to set frag threshold for VDEV: %d\n",
 			    arvif->vdev_id);
-	else
-		ath10k_dbg(ATH10K_DBG_MAC,
-			   "Set frag threshold: %d for VDEV: %d\n",
-			   frag, arvif->vdev_id);
 }
 
 static int ath10k_set_frag_threshold(struct ieee80211_hw *hw, u32 value)
author
#8 lore raw

PATCH 8/8 ath10k: print phymode as a string

In reply to Kalle Valo

Makes it easier to read debug logs.

---
 drivers/net/wireless/ath/ath10k/mac.c |    9 ++++++-
 drivers/net/wireless/ath/ath10k/wmi.h |   42 +++++++++++++++++++++++++++++++++
 2 files changed, 49 insertions(+), 2 deletions(-)
drivers/net/wireless/ath/ath10k/mac.c +7 -2
index b8c81bb..2b11856 100644
@@ -460,6 +460,11 @@ static int ath10k_vdev_start(struct ath10k_vif *arvif)
 		arg.ssid_len = arvif->vif->bss_conf.ssid_len;
 	}
 
+	ath10k_dbg(ATH10K_DBG_MAC,
+		   "mac vdev %d start center_freq %d phymode %s\n",
+		   arg.vdev_id, arg.channel.freq,
+		   ath10k_wmi_phymode_str(arg.channel.mode));
+
 	ret = ath10k_wmi_vdev_start(ar, &arg);
 	if (ret) {
 		ath10k_warn("WMI vdev start failed: ret %d\n", ret);
@@ -1104,8 +1109,8 @@ static void ath10k_peer_assoc_h_phymode(struct ath10k *ar,
 		break;
 	}
 
-	ath10k_dbg(ATH10K_DBG_MAC, "mac peer %pM phymode %d\n",
-		   sta->addr, phymode);
+	ath10k_dbg(ATH10K_DBG_MAC, "mac peer %pM phymode %s\n",
+		   sta->addr, ath10k_wmi_phymode_str(phymode));
 
 	arg->peer_phymode = phymode;
 	WARN_ON(phymode == MODE_UNKNOWN);
drivers/net/wireless/ath/ath10k/wmi.h +42 -0

48 lines not on this page · raw message

author Applied
#9 lore raw
In reply to Kalle Valo
Quoted 4 lines · Kalle Valo

Simple message log cleanup. Please review.

---

Quoted 9 lines

Kalle Valo (8):
ath10k: add BMI log level
ath10k: rename ATH10K_DBG_CORE to BOOT
ath10k: cleanup debug messages in core.c
ath10k: add boot debug messages to pci.c and ce.c
ath10k: add boot debug messages to htc.c
ath10k: add boot messages to htt.c
ath10k: clean mac.c debug messages
ath10k: print phymode as a string

Applied.

Kalle