change package tarball compression to xz whenever possible
PATCH v3 1/1 change package tarball compression to xz whenever possible
---
v3
- actualization (some package tarballs have been changed in the mean time)
v2
- usbutils.mk has been changed in the mean time
- zlib tarball has already been changed to xz
docs/manual/adding-packages-autotools.txt | 6 +++--- docs/manual/adding-packages-cmake.txt | 6 +++--- docs/manual/adding-packages-generic.txt | 4 ++-- package/autoconf/autoconf.mk | 1 + package/automake/automake.mk | 1 + package/bison/bison.mk | 1 + package/bluez_utils/bluez_utils.mk | 2 +- package/ccache/ccache.mk | 2 +- package/connman/connman.mk | 1 + package/cpuload/cpuload.mk | 1 + package/diffutils/diffutils.mk | 1 + package/dnsmasq/dnsmasq.mk | 1 + package/dosfstools/dosfstools.mk | 1 + package/dropwatch/dropwatch.mk | 2 +- package/ethtool/ethtool.mk | 1 + package/fb-test-app/fb-test-app.mk | 1 + package/gawk/gawk.mk | 1 + package/gmp/gmp.mk | 2 +- package/gzip/gzip.mk | 1 + package/input-event-daemon/input-event-daemon.mk | 1 + package/iproute2/iproute2.mk | 1 + package/iw/iw.mk | 2 +- package/kbd/kbd.mk | 2 +- package/kismet/kismet.mk | 1 + package/libogg/libogg.mk | 1 + package/libraw1394/libraw1394.mk | 1 + package/libtheora/libtheora.mk | 2 +- package/libtool/libtool.mk | 2 +- package/libvorbis/libvorbis.mk | 2 +- package/libwebsockets/libwebsockets.mk | 1 + package/lighttpd/lighttpd.mk | 1 + package/lzma/lzma.mk | 2 +- package/m4/m4.mk | 2 +- package/mdadm/mdadm.mk | 2 +- package/mpfr/mpfr.mk | 2 +- .../multimedia/gst-plugins-bad/gst-plugins-bad.mk | 2 +- .../gst-plugins-base/gst-plugins-base.mk | 2 +- .../gst-plugins-good/gst-plugins-good.mk | 2 +- .../gst-plugins-ugly/gst-plugins-ugly.mk | 2 +- package/multimedia/gstreamer/gstreamer.mk | 2 +- package/multimedia/mpd/mpd.mk | 1 + package/multimedia/pulseaudio/pulseaudio.mk | 1 + package/nasm/nasm.mk | 2 +- package/neard/neard.mk | 1 + package/ofono/ofono.mk | 1 + package/openvpn/openvpn.mk | 1 + package/patch/patch.mk | 1 + package/php/php.mk | 2 +- package/python/python.mk | 2 +- package/python3/python3.mk | 2 +- package/quagga/quagga.mk | 1 + package/sg3_utils/sg3_utils.mk | 1 + package/squid/squid.mk | 1 + package/tftpd/tftpd.mk | 2 +- package/transmission/transmission.mk | 2 +- package/udev/udev.mk | 2 +- package/usbutils/usbutils.mk | 1 + package/util-linux/util-linux.mk | 2 +- package/wget/wget.mk | 1 + package/wireless-regdb/wireless-regdb.mk | 2 +- package/xz/xz.mk | 2 +- 61 files changed, 66 insertions(+), 36 deletions(-)
docs/manual/adding-packages-autotools.txt +3 -3
@@ -32,9 +32,9 @@ package, with an example : On line 7, we declare the version of the package. -On line 8 and 9, we declare the name of the tarball and the location -of the tarball on the Web. Buildroot will automatically download the -tarball from this location. +On line 8 and 9, we declare the name of the tarball (xz-ed tarball recommended) +and the location of the tarball on the Web. Buildroot will automatically +download the tarball from this location. On line 10, we tell Buildroot to install the package to the staging directory. The staging directory, located in +output/staging/+
docs/manual/adding-packages-cmake.txt +3 -3
@@ -32,9 +32,9 @@ with an example : On line 7, we declare the version of the package. -On line 8 and 9, we declare the name of the tarball and the location -of the tarball on the Web. Buildroot will automatically download the -tarball from this location. +On line 8 and 9, we declare the name of the tarball (xz-ed tarball recommended) +and the location of the tarball on the Web. Buildroot will automatically +download the tarball from this location. On line 10, we tell Buildroot to install the package to the staging directory. The staging directory, located in +output/staging/+
docs/manual/adding-packages-generic.txt +2 -2
@@ -62,8 +62,8 @@ system is based on hand-written Makefiles or shell scripts. The Makefile begins on line 7 to 11 with metadata information: the version of the package (+LIBFOO_VERSION+), the name of the -tarball containing the package (+LIBFOO_SOURCE+) the -Internet location at which the tarball can be downloaded from +tarball containing the package (+LIBFOO_SOURCE+) (xz-ed tarball recommended) +the Internet location at which the tarball can be downloaded from (+LIBFOO_SITE+), the license (+LIBFOO_LICENSE+) and file with the license text (+LIBFOO_LICENSE_FILES+). All variables must start with the same prefix, +LIBFOO_+ in this case. This prefix is always the
package/autoconf/autoconf.mk +1 -0
@@ -5,6 +5,7 @@ ################################################################################ AUTOCONF_VERSION = 2.69 +AUTOCONF_SOURCE = autoconf-$(AUTOCONF_VERSION).tar.xz AUTOCONF_SITE = $(BR2_GNU_MIRROR)/autoconf AUTOCONF_LICENSE = GPLv3+ with exceptions
package/automake/automake.mk +1 -0
@@ -5,6 +5,7 @@ ################################################################################ AUTOMAKE_VERSION = 1.11.6 +AUTOMAKE_SOURCE = automake-$(AUTOMAKE_VERSION).tar.xz AUTOMAKE_SITE = $(BR2_GNU_MIRROR)/automake AUTOMAKE_LICENSE = GPLv2+ AUTOMAKE_LICENSE_FILES = COPYING
package/bison/bison.mk +1 -0
@@ -5,6 +5,7 @@ ################################################################################ BISON_VERSION = 2.7.1 +BISON_SOURCE = bison-$(BISON_VERSION).tar.xz BISON_SITE = $(BR2_GNU_MIRROR)/bison BISON_LICENSE = GPLv3+ BISON_LICENSE_FILES = COPYING
package/bluez_utils/bluez_utils.mk +1 -1
@@ -5,7 +5,7 @@ ################################################################################ BLUEZ_UTILS_VERSION = 4.101 -BLUEZ_UTILS_SOURCE = bluez-$(BLUEZ_UTILS_VERSION).tar.gz +BLUEZ_UTILS_SOURCE = bluez-$(BLUEZ_UTILS_VERSION).tar.xz BLUEZ_UTILS_SITE = $(BR2_KERNEL_MIRROR)/linux/bluetooth BLUEZ_UTILS_INSTALL_STAGING = YES BLUEZ_UTILS_DEPENDENCIES = dbus libglib2
package/ccache/ccache.mk +1 -1
@@ -6,7 +6,7 @@ CCACHE_VERSION = 3.1.8 CCACHE_SITE = http://samba.org/ftp/ccache -CCACHE_SOURCE = ccache-$(CCACHE_VERSION).tar.bz2 +CCACHE_SOURCE = ccache-$(CCACHE_VERSION).tar.xz CCACHE_LICENSE = GPLv3+, others CCACHE_LICENSE_FILES = LICENSE.txt GPL-3.0.txt
package/connman/connman.mk +1 -0
@@ -5,6 +5,7 @@ ################################################################################ CONNMAN_VERSION = 1.12 +CONNMAN_SOURCE = connman-$(CONNMAN_VERSION).tar.xz CONNMAN_SITE = $(BR2_KERNEL_MIRROR)/linux/network/connman/ CONNMAN_DEPENDENCIES = libglib2 dbus iptables gnutls CONNMAN_INSTALL_STAGING = YES
package/cpuload/cpuload.mk +1 -0
@@ -5,6 +5,7 @@ ################################################################################ CPULOAD_VERSION = v0.3 +CPULOAD_SOURCE = cpuload-$(CPULOAD_VERSION).tar.xz CPULOAD_SITE = http://github.com/kelvincheung/cpuload/tarball/$(CPULOAD_VERSION) CPULOAD_LICENSE = GPLv2 CPULOAD_LICENSE_FILES = COPYING
package/diffutils/diffutils.mk +1 -0
@@ -5,6 +5,7 @@ ################################################################################ DIFFUTILS_VERSION = 3.2 +DIFFUTILS_SOURCE = diffutils-$(DIFFUTILS_VERSION).tar.xz DIFFUTILS_SITE = $(BR2_GNU_MIRROR)/diffutils DIFFUTILS_DEPENDENCIES = $(if $(BR2_NEEDS_GETTEXT_IF_LOCALE),gettext) DIFFUTILS_LICENSE = GPLv3+
package/dnsmasq/dnsmasq.mk +1 -0
@@ -5,6 +5,7 @@ ################################################################################ DNSMASQ_VERSION = 2.66 +DNSMASQ_SOURCE = dnsmasq-$(DNSMASQ_VERSION).tar.xz DNSMASQ_SITE = http://thekelleys.org.uk/dnsmasq DNSMASQ_MAKE_ENV = $(TARGET_MAKE_ENV) CC="$(TARGET_CC)" DNSMASQ_MAKE_OPT = COPTS="$(DNSMASQ_COPTS)" PREFIX=/usr CFLAGS="$(TARGET_CFLAGS)"
package/dosfstools/dosfstools.mk +1 -0
@@ -5,6 +5,7 @@ ################################################################################ DOSFSTOOLS_VERSION = 3.0.20 +DOSFSTOOLS_SOURCE = dosfstools-$(DOSFSTOOLS_VERSION).tar.xz DOSFSTOOLS_SITE = http://daniel-baumann.ch/files/software/dosfstools DOSFSTOOLS_LICENSE = GPLv3+ DOSFSTOOLS_LICENSE_FILES = COPYING
package/dropwatch/dropwatch.mk +1 -1
@@ -5,7 +5,7 @@ ################################################################################ DROPWATCH_VERSION = 1.4 -DROPWATCH_SOURCE = dropwatch-$(DROPWATCH_VERSION).tar.bz2 +DROPWATCH_SOURCE = dropwatch-$(DROPWATCH_VERSION).tar.xz DROPWATCH_SITE = https://git.fedorahosted.org/cgit/dropwatch.git/snapshot/ DROPWATCH_DEPENDENCIES = binutils libnl readline host-pkgconf DROPWATCH_LICENSE = GPLv2
package/ethtool/ethtool.mk +1 -0
@@ -5,6 +5,7 @@ ################################################################################ ETHTOOL_VERSION = 3.10 +ETHTOOL_SOURCE = ethtool-$(ETHTOOL_VERSION).tar.xz ETHTOOL_SITE = $(BR2_KERNEL_MIRROR)/software/network/ethtool ETHTOOL_LICENSE = GPLv2 ETHTOOL_LICENSE_FILES = COPYING
package/fb-test-app/fb-test-app.mk +1 -0
@@ -5,6 +5,7 @@ ################################################################################ FB_TEST_APP_VERSION = v1.0.0 +FB_TEST_APP_SOURCE = fb-test-app-$(FB_TEST_APP_VERSION).tar.xz FB_TEST_APP_SITE = http://github.com/prpplague/fb-test-app/tarball/$(FB_TEST_APP_VERSION) FB_TEST_APP_LICENSE = GPLv2 FB_TEST_APP_LICENSE_FILES = COPYING
package/gawk/gawk.mk +1 -0
@@ -5,6 +5,7 @@ ################################################################################ GAWK_VERSION = 4.1.0 +GAWK_SOURCE = gawk-$(GAWK_VERSION).tar.xz GAWK_SITE = $(BR2_GNU_MIRROR)/gawk GAWK_DEPENDENCIES = host-gawk $(if $(BR2_PACKAGE_MPFR),mpfr) GAWK_LICENSE = GPLv3+
package/gmp/gmp.mk +1 -1
@@ -6,7 +6,7 @@ GMP_VERSION = 5.1.2 GMP_SITE = ftp://ftp.gmplib.org/pub/gmp-$(GMP_VERSION) -GMP_SOURCE = gmp-$(GMP_VERSION).tar.bz2 +GMP_SOURCE = gmp-$(GMP_VERSION).tar.xz GMP_INSTALL_STAGING = YES GMP_LICENSE = LGPLv3+ GMP_LICENSE_FILES = COPYING.LIB
package/gzip/gzip.mk +1 -0
@@ -5,6 +5,7 @@ ################################################################################ GZIP_VERSION = 1.6 +GZIP_SOURCE = gzip-$(GZIP_VERSION).tar.xz GZIP_SITE = $(BR2_GNU_MIRROR)/gzip GZIP_LICENSE = GPLv3+ GZIP_LICENSE_FILES = COPYING
package/input-event-daemon/input-event-daemon.mk +1 -0
@@ -5,6 +5,7 @@ ################################################################################ INPUT_EVENT_DAEMON_VERSION = v0.1.3 +INPUT_EVENT_DAEMON_SOURCE = input-event-daemon-$(INPUT_EVENT_DAEMON_VERSION).tar.xz INPUT_EVENT_DAEMON_SITE = http://github.com/gandro/input-event-daemon/tarball/$(INPUT_EVENT_DAEMON_VERSION) INPUT_EVENT_DAEMON_LICENSE = input-event-daemon license INPUT_EVENT_DAEMON_LICENSE_FILES = README
package/iproute2/iproute2.mk +1 -0
@@ -5,6 +5,7 @@ ################################################################################ IPROUTE2_VERSION = 3.10.0 +IPROUTE2_SOURCE = iproute2-$(IPROUTE2_VERSION).tar.xz IPROUTE2_SITE = $(BR2_KERNEL_MIRROR)/linux/utils/net/iproute2 IPROUTE2_TARGET_SBINS = ctstat genl ifstat ip lnstat nstat routef routel rtacct rtmon rtpr rtstat ss tc IPROUTE2_LICENSE = GPLv2
package/iw/iw.mk +1 -1
@@ -5,7 +5,7 @@ ################################################################################ IW_VERSION = 3.11 -IW_SOURCE = iw-$(IW_VERSION).tar.bz2 +IW_SOURCE = iw-$(IW_VERSION).tar.xz IW_SITE = $(BR2_KERNEL_MIRROR)/software/network/iw IW_LICENSE = iw license IW_LICENSE_FILES = COPYING
package/kbd/kbd.mk +1 -1
@@ -5,7 +5,7 @@ ################################################################################ KBD_VERSION = 1.15.2 -KBD_SOURCE = kbd-$(KBD_VERSION).tar.gz +KBD_SOURCE = kbd-$(KBD_VERSION).tar.xz KBD_SITE = $(BR2_KERNEL_MIRROR)/linux/utils/kbd KBD_LICENSE = GPLv2+ KBD_LICENSE_FILES = COPYING
package/kismet/kismet.mk +1 -0
@@ -5,6 +5,7 @@ ################################################################################ KISMET_VERSION = 2013-03-R1b +KISMET_SOURCE = kismet-$(KISMET_VERSION).tar.xz KISMET_SITE = http://www.kismetwireless.net/code KISMET_DEPENDENCIES = host-pkgconf libpcap ncurses libnl KISMET_CONF_OPT += --with-netlink-version=3
package/libogg/libogg.mk +1 -0
@@ -5,6 +5,7 @@ ################################################################################ LIBOGG_VERSION = 1.3.0 +LIBOGG_SOURCE = libogg-$(LIBOGG_VERSION).tar.xz LIBOGG_SITE = http://downloads.xiph.org/releases/ogg LIBOGG_LICENSE = BSD-3c LIBOGG_LICENSE_FILES = COPYING
package/libraw1394/libraw1394.mk +1 -0
@@ -5,6 +5,7 @@ ################################################################################ LIBRAW1394_VERSION = 2.0.7 +LIBRAW1394_SOURCE = libraw1394-$(LIBRAW1394_VERSION).tar.xz LIBRAW1394_SITE = $(BR2_KERNEL_MIRROR)/linux/libs/ieee1394 LIBRAW1394_INSTALL_STAGING = YES
package/libtheora/libtheora.mk +1 -1
@@ -5,7 +5,7 @@ ################################################################################ LIBTHEORA_VERSION = 1.1.1 -LIBTHEORA_SOURCE = libtheora-$(LIBTHEORA_VERSION).tar.bz2 +LIBTHEORA_SOURCE = libtheora-$(LIBTHEORA_VERSION).tar.xz LIBTHEORA_SITE = http://downloads.xiph.org/releases/theora LIBTHEORA_INSTALL_STAGING = YES LIBTHEORA_LICENSE = BSD-3c
package/libtool/libtool.mk +1 -1
@@ -5,7 +5,7 @@ ################################################################################ LIBTOOL_VERSION = 2.4.2 -LIBTOOL_SOURCE = libtool-$(LIBTOOL_VERSION).tar.gz +LIBTOOL_SOURCE = libtool-$(LIBTOOL_VERSION).tar.xz LIBTOOL_SITE = $(BR2_GNU_MIRROR)/libtool LIBTOOL_INSTALL_STAGING = YES LIBTOOL_LICENSE = GPLv2+
package/libvorbis/libvorbis.mk +1 -1
@@ -5,7 +5,7 @@ ################################################################################ LIBVORBIS_VERSION = 1.3.3 -LIBVORBIS_SOURCE = libvorbis-$(LIBVORBIS_VERSION).tar.gz +LIBVORBIS_SOURCE = libvorbis-$(LIBVORBIS_VERSION).tar.xz LIBVORBIS_SITE = http://downloads.xiph.org/releases/vorbis/ LIBVORBIS_INSTALL_STAGING = YES LIBVORBIS_CONF_OPT = --disable-oggtest
package/libwebsockets/libwebsockets.mk +1 -0
@@ -5,6 +5,7 @@ ################################################################################ LIBWEBSOCKETS_VERSION = v1.22-chrome26-firefox18 +LIBWEBSOCKETS_SOURCE = libwebsockets-$(LIBWEBSOCKETS_VERSION).tar.xz LIBWEBSOCKETS_SITE = http://git.libwebsockets.org/cgi-bin/cgit/libwebsockets/snapshot LIBWEBSOCKETS_LICENSE = LGPLv2.1 LIBWEBSOCKETS_LICENSE_FILES = COPYING
package/lighttpd/lighttpd.mk +1 -0
@@ -5,6 +5,7 @@ ################################################################################ LIGHTTPD_VERSION = 1.4.32 +LIGHTTPD_SOURCE = lighttpd-$(LIGHTTPD_VERSION).tar.xz LIGHTTPD_SITE = http://download.lighttpd.net/lighttpd/releases-1.4.x LIGHTTPD_LICENSE = BSD-3c LIGHTTPD_LICENSE_FILES = COPYING
package/lzma/lzma.mk +1 -1
@@ -5,7 +5,7 @@ ################################################################################ LZMA_VERSION = 4.32.7 -LZMA_SOURCE = lzma-$(LZMA_VERSION).tar.gz +LZMA_SOURCE = lzma-$(LZMA_VERSION).tar.xz LZMA_SITE = http://tukaani.org/lzma/ LZMA_INSTALL_STAGING = YES LZMA_CONF_OPT = $(if $(BR2_ENABLE_DEBUG),--enable-debug,--disable-debug)
package/m4/m4.mk +1 -1
@@ -5,7 +5,7 @@ ################################################################################ M4_VERSION = 1.4.16 -M4_SOURCE = m4-$(M4_VERSION).tar.bz2 +M4_SOURCE = m4-$(M4_VERSION).tar.xz M4_SITE = $(BR2_GNU_MIRROR)/m4 M4_LICENSE = GPLv3+ M4_LICENSE_FILES = COPYING
package/mdadm/mdadm.mk +1 -1
@@ -5,7 +5,7 @@ ################################################################################ MDADM_VERSION = 3.2.6 -MDADM_SOURCE = mdadm-$(MDADM_VERSION).tar.bz2 +MDADM_SOURCE = mdadm-$(MDADM_VERSION).tar.xz MDADM_SITE = $(BR2_KERNEL_MIRROR)/linux/utils/raid/mdadm MDADM_LICENSE = GPLv2+ MDADM_LICENSE_FILES = COPYING
package/mpfr/mpfr.mk +1 -1
@@ -6,7 +6,7 @@ MPFR_VERSION = 3.1.2 MPFR_SITE = http://www.mpfr.org/mpfr-$(MPFR_VERSION) -MPFR_SOURCE = mpfr-$(MPFR_VERSION).tar.bz2 +MPFR_SOURCE = mpfr-$(MPFR_VERSION).tar.xz MPFR_LICENSE = LGPLv3+ MPFR_LICENSE_FILES = COPYING.LESSER MPFR_INSTALL_STAGING = YES
package/multimedia/gst-plugins-bad/gst-plugins-bad.mk +1 -1
@@ -5,7 +5,7 @@ ################################################################################ GST_PLUGINS_BAD_VERSION = 0.10.23 -GST_PLUGINS_BAD_SOURCE = gst-plugins-bad-$(GST_PLUGINS_BAD_VERSION).tar.bz2 +GST_PLUGINS_BAD_SOURCE = gst-plugins-bad-$(GST_PLUGINS_BAD_VERSION).tar.xz GST_PLUGINS_BAD_SITE = http://gstreamer.freedesktop.org/src/gst-plugins-bad GST_PLUGINS_BAD_CONF_OPT = \
package/multimedia/gst-plugins-base/gst-plugins-base.mk +1 -1
@@ -5,7 +5,7 @@ ################################################################################ GST_PLUGINS_BASE_VERSION = 0.10.36 -GST_PLUGINS_BASE_SOURCE = gst-plugins-base-$(GST_PLUGINS_BASE_VERSION).tar.bz2 +GST_PLUGINS_BASE_SOURCE = gst-plugins-base-$(GST_PLUGINS_BASE_VERSION).tar.xz GST_PLUGINS_BASE_SITE = http://gstreamer.freedesktop.org/src/gst-plugins-base GST_PLUGINS_BASE_INSTALL_STAGING = YES
package/multimedia/gst-plugins-good/gst-plugins-good.mk +1 -1
@@ -5,7 +5,7 @@ ################################################################################ GST_PLUGINS_GOOD_VERSION = 0.10.31 -GST_PLUGINS_GOOD_SOURCE = gst-plugins-good-$(GST_PLUGINS_GOOD_VERSION).tar.bz2 +GST_PLUGINS_GOOD_SOURCE = gst-plugins-good-$(GST_PLUGINS_GOOD_VERSION).tar.xz GST_PLUGINS_GOOD_SITE = http://gstreamer.freedesktop.org/src/gst-plugins-good GST_PLUGINS_GOOD_CONF_OPT = \
package/multimedia/gst-plugins-ugly/gst-plugins-ugly.mk +1 -1
@@ -5,7 +5,7 @@ ################################################################################ GST_PLUGINS_UGLY_VERSION = 0.10.19 -GST_PLUGINS_UGLY_SOURCE = gst-plugins-ugly-$(GST_PLUGINS_UGLY_VERSION).tar.bz2 +GST_PLUGINS_UGLY_SOURCE = gst-plugins-ugly-$(GST_PLUGINS_UGLY_VERSION).tar.xz GST_PLUGINS_UGLY_SITE = http://gstreamer.freedesktop.org/src/gst-plugins-ugly GST_PLUGINS_UGLY_CONF_OPT = \
package/multimedia/gstreamer/gstreamer.mk +1 -1
@@ -5,7 +5,7 @@ ################################################################################ GSTREAMER_VERSION = 0.10.36 -GSTREAMER_SOURCE = gstreamer-$(GSTREAMER_VERSION).tar.bz2 +GSTREAMER_SOURCE = gstreamer-$(GSTREAMER_VERSION).tar.xz GSTREAMER_SITE = http://gstreamer.freedesktop.org/src/gstreamer GSTREAMER_INSTALL_STAGING = YES
package/multimedia/mpd/mpd.mk +1 -0
@@ -5,6 +5,7 @@ ################################################################################ MPD_VERSION = 0.17.5 +MPD_SOURCE = mpd-$(MPD_VERSION).tar.xz MPD_SITE = http://www.musicpd.org/download/mpd/stable MPD_DEPENDENCIES = host-pkgconf libglib2 MPD_LICENSE = GPLv2
package/multimedia/pulseaudio/pulseaudio.mk +1 -0
@@ -5,6 +5,7 @@ ################################################################################ PULSEAUDIO_VERSION = 4.0 +PULSEAUDIO_SOURCE = pulseaudio-$(PULSEAUDIO_VERSION).tar.xz PULSEAUDIO_SITE = http://freedesktop.org/software/pulseaudio/releases/ PULSEAUDIO_INSTALL_STAGING = YES PULSEAUDIO_LICENSE = LGPLv2.1+ (specific license for modules, see LICENSE file)
package/nasm/nasm.mk +1 -1
@@ -5,7 +5,7 @@ ################################################################################ NASM_VERSION = 2.10.01 -NASM_SOURCE = nasm-$(NASM_VERSION).tar.bz2 +NASM_SOURCE = nasm-$(NASM_VERSION).tar.xz NASM_SITE = http://www.nasm.us/pub/nasm/releasebuilds/$(NASM_VERSION) $(eval $(autotools-package))
package/neard/neard.mk +1 -0
@@ -5,6 +5,7 @@ ################################################################################ NEARD_VERSION = 0.12 +NEARD_SOURCE = neard-$(NEARD_VERSION).tar.xz NEARD_SITE = $(BR2_KERNEL_MIRROR)/linux/network/nfc NEARD_LICENSE = GPLv2 NEARD_LICENSE_FILES = COPYING
package/ofono/ofono.mk +1 -0
@@ -5,6 +5,7 @@ ################################################################################ OFONO_VERSION = 1.12 +OFONO_SOURCE = ofono-$(OFONO_VERSION).tar.xz OFONO_SITE = $(BR2_KERNEL_MIRROR)/linux/network/ofono OFONO_LICENSE = GPLv2 OFONO_LICENSE_FILES = COPYING
package/openvpn/openvpn.mk +1 -0
@@ -5,6 +5,7 @@ ################################################################################ OPENVPN_VERSION = 2.3.2 +OPENVPN_SOURCE = openvpn-$(OPENVPN_VERSION).tar.xz OPENVPN_SITE = http://swupdate.openvpn.net/community/releases OPENVPN_DEPENDENCIES = host-pkgconf OPENVPN_LICENSE = GPLv2
package/patch/patch.mk +1 -0
@@ -5,6 +5,7 @@ ################################################################################ PATCH_VERSION = 2.7.1 +PATCH_SOURCE = patch-$(PATCH_VERSION).tar.xz PATCH_SITE = $(BR2_GNU_MIRROR)/patch PATCH_LICENSE = GPLv3+ PATCH_LICENSE_FILES = COPYING
package/php/php.mk +1 -1
@@ -5,7 +5,7 @@ ################################################################################ PHP_VERSION = 5.3.27 -PHP_SOURCE = php-$(PHP_VERSION).tar.bz2 +PHP_SOURCE = php-$(PHP_VERSION).tar.xz PHP_SITE = http://www.php.net/distributions PHP_INSTALL_STAGING = YES PHP_INSTALL_STAGING_OPT = INSTALL_ROOT=$(STAGING_DIR) install
package/python/python.mk +1 -1
@@ -6,7 +6,7 @@ PYTHON_VERSION_MAJOR = 2.7 PYTHON_VERSION = $(PYTHON_VERSION_MAJOR).3 -PYTHON_SOURCE = Python-$(PYTHON_VERSION).tar.bz2 +PYTHON_SOURCE = Python-$(PYTHON_VERSION).tar.xz PYTHON_SITE = http://python.org/ftp/python/$(PYTHON_VERSION) PYTHON_LICENSE = Python software foundation license v2, others PYTHON_LICENSE_FILES = LICENSE
package/python3/python3.mk +1 -1
@@ -6,7 +6,7 @@ PYTHON3_VERSION_MAJOR = 3.3 PYTHON3_VERSION = $(PYTHON3_VERSION_MAJOR).0 -PYTHON3_SOURCE = Python-$(PYTHON3_VERSION).tar.bz2 +PYTHON3_SOURCE = Python-$(PYTHON3_VERSION).tar.xz PYTHON3_SITE = http://python.org/ftp/python/$(PYTHON3_VERSION) # Python needs itself and a "pgen" program to build itself, both being
package/quagga/quagga.mk +1 -0
@@ -5,6 +5,7 @@ ################################################################################ QUAGGA_VERSION = 0.99.22.1 +QUAGGA_SOURCE = quagga-$(QUAGGA_VERSION).tar.xz QUAGGA_SITE = http://download.savannah.gnu.org/releases/quagga QUAGGA_DEPENDENCIES = host-gawk QUAGGA_LICENSE = GPLv2+
package/sg3_utils/sg3_utils.mk +1 -0
@@ -5,6 +5,7 @@ ################################################################################ SG3_UTILS_VERSION = 1.34 +SG3_UTILS_SOURCE = sg3_utils-$(SG3_UTILS_VERSION).tar.xz SG3_UTILS_SITE = http://sg.danny.cz/sg/p/ SG3_UTILS_LICENSE = BSD-3c # utils progs are GPLv2+ licenced
package/squid/squid.mk +1 -0
@@ -5,6 +5,7 @@ ################################################################################ SQUID_VERSION = 3.3.8 +SQUID_SOURCE = squid-$(SQUID_VERSION).tar.xz SQUID_SITE = http://www.squid-cache.org/Versions/v3/3.3 SQUID_LICENSE = GPLv2+ SQUID_LICENSE_FILES = COPYING
package/tftpd/tftpd.mk +1 -1
@@ -5,7 +5,7 @@ ################################################################################ TFTPD_VERSION = 5.2 -TFTPD_SOURCE = tftp-hpa-$(TFTPD_VERSION).tar.bz2 +TFTPD_SOURCE = tftp-hpa-$(TFTPD_VERSION).tar.xz TFTPD_SITE = $(BR2_KERNEL_MIRROR)/software/network/tftp/tftp-hpa TFTPD_CONF_OPT = --without-tcpwrappers
package/transmission/transmission.mk +1 -1
@@ -6,7 +6,7 @@ TRANSMISSION_VERSION = 2.33 TRANSMISSION_SITE = http://download.transmissionbt.com/files/ -TRANSMISSION_SOURCE = transmission-$(TRANSMISSION_VERSION).tar.bz2 +TRANSMISSION_SOURCE = transmission-$(TRANSMISSION_VERSION).tar.xz TRANSMISSION_DEPENDENCIES = \ host-pkgconf \ host-intltool \
package/udev/udev.mk +1 -1
@@ -5,7 +5,7 @@ ################################################################################ UDEV_VERSION = 182 -UDEV_SOURCE = udev-$(UDEV_VERSION).tar.bz2 +UDEV_SOURCE = udev-$(UDEV_VERSION).tar.xz UDEV_SITE = $(BR2_KERNEL_MIRROR)/linux/utils/kernel/hotplug/ UDEV_LICENSE = GPLv2+ UDEV_LICENSE_FILES = COPYING
package/usbutils/usbutils.mk +1 -0
@@ -5,6 +5,7 @@ ################################################################################ USBUTILS_VERSION = 007 +USBUTILS_SOURCE = usbutils-$(USBUTILS_VERSION).tar.xz USBUTILS_SITE = $(BR2_KERNEL_MIRROR)/linux/utils/usb/usbutils USBUTILS_DEPENDENCIES = host-pkgconf libusb USBUTILS_INSTALL_STAGING = YES
package/util-linux/util-linux.mk +1 -1
@@ -6,7 +6,7 @@ UTIL_LINUX_VERSION = $(UTIL_LINUX_VERSION_MAJOR).2 UTIL_LINUX_VERSION_MAJOR = 2.23 -UTIL_LINUX_SOURCE = util-linux-$(UTIL_LINUX_VERSION).tar.bz2 +UTIL_LINUX_SOURCE = util-linux-$(UTIL_LINUX_VERSION).tar.xz UTIL_LINUX_SITE = $(BR2_KERNEL_MIRROR)/linux/utils/util-linux/v$(UTIL_LINUX_VERSION_MAJOR) # README.licensing claims that some files are GPLv2-only, but this is not true.
package/wget/wget.mk +1 -0
@@ -5,6 +5,7 @@ ################################################################################ WGET_VERSION = 1.14 +WGET_SOURCE = wget-$(WGET_VERSION).tar.xz WGET_SITE = $(BR2_GNU_MIRROR)/wget WGET_LICENSE = GPLv3+ WGET_LICENSE_FILES = COPYING
package/wireless-regdb/wireless-regdb.mk +1 -1
@@ -5,7 +5,7 @@ ################################################################################ WIRELESS_REGDB_VERSION = 2013.02.13 -WIRELESS_REGDB_SOURCE = wireless-regdb-$(WIRELESS_REGDB_VERSION).tar.bz2 +WIRELESS_REGDB_SOURCE = wireless-regdb-$(WIRELESS_REGDB_VERSION).tar.xz WIRELESS_REGDB_SITE = http://kernel.org/pub/software/network/wireless-regdb WIRELESS_REGDB_LICENSE = ISC WIRELESS_REGDB_LICENSE_FILES = LICENSE
package/xz/xz.mk +1 -1
@@ -5,7 +5,7 @@ ################################################################################ XZ_VERSION = 5.0.4 -XZ_SOURCE = xz-$(XZ_VERSION).tar.bz2 +XZ_SOURCE = xz-$(XZ_VERSION).tar.xz XZ_SITE = http://tukaani.org/xz/ XZ_INSTALL_STAGING = YES XZ_CONF_ENV = ac_cv_prog_cc_c99='-std=gnu99'
Signature · 1 line
1.7.9.5
PATCH v3 1/1 change package tarball compression to xz whenever possible
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Jerzy" == Jerzy Grzegorek <[email protected]> writes:
Jerzy> Signed-off-by: Jerzy Grzegorek <[email protected]> Jerzy> ---
Jerzy> v3
Jerzy> - actualization (some package tarballs have been changed in the mean time)
Jerzy> v2
Jerzy> - usbutils.mk has been changed in the mean time Jerzy> - zlib tarball has already been changed to xz
Jerzy> --- a/package/xz/xz.mk
Jerzy> +++ b/package/xz/xz.mk
Jerzy> @@ -5,7 +5,7 @@
Jerzy> ################################################################################
Jerzy> XZ_VERSION = 5.0.4
Jerzy> -XZ_SOURCE = xz-$(XZ_VERSION).tar.bz2
Jerzy> +XZ_SOURCE = xz-$(XZ_VERSION).tar.xz
That's no good with the recent xzcat change (xzcat: treat as host prerequisite and build if needed) as we then need xzcat to extract the tarball to build xzcat.
Committed without this change, thanks.
Signature · 1 line
Bye, Peter Korsgaard
PATCH v3 1/1 change package tarball compression to xz whenever possible
In reply to Jerzy GrzegorekPeter,
Quoted 1 line · Jerzy Grzegorek
Signed-off-by Jerzy Grzegorek <[email protected]>
I've seen you committed this patch, but unfortunately it breaks all Github downloads. It assumes Github provides a .tar.xz file, but it doesn't: even if you request a .tar.xz file from Github, it gives you a gzip compressed file:
$ wget http://github.com/gandro/input-event-daemon/tarball/v0.1.3/input-event-daemon-v0.1.3.tar.xz [...] $ file input-event-daemon-v0.1.3.tar.xz input-event-daemon-v0.1.3.tar.xz: gzip compressed data, from Unix
This is causing a huge number of build failures in the autobuilders. For example, cpuload:
http://autobuild.buildroot.org/results/bcd/bcdf4bdca4d5f8ffc9c84afcadf1b057fc03e009/build-end.log.
So I believe this patch should be reverted, or at least the parts affecting Github downloads.
Thomas
Signature · 4 lines
Thomas Petazzoni, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com
PATCH v3 1/1 change package tarball compression to xz whenever possible
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Thomas" == Thomas Petazzoni <[email protected]> writes:
Thomas> Peter,
Quoted 1 line · Jerzy Grzegorek
Quoted 1 line
Signed-off-by Jerzy Grzegorek <[email protected]>
Thomas> I've seen you committed this patch, but unfortunately it breaks all Thomas> Github downloads. It assumes Github provides a .tar.xz file, but it Thomas> doesn't: even if you request a .tar.xz file from Github, it gives you a Thomas> gzip compressed file:
Thomas> $ wget http://github.com/gandro/input-event-daemon/tarball/v0.1.3/input-event-daemon-v0.1.3.tar.xz
Thomas> [...]
Thomas> $ file input-event-daemon-v0.1.3.tar.xz
Thomas> input-event-daemon-v0.1.3.tar.xz: gzip compressed data, from Unix
Thomas> This is causing a huge number of build failures in the autobuilders.
Thomas> For example, cpuload:
Thomas> http://autobuild.buildroot.org/results/bcd/bcdf4bdca4d5f8ffc9c84afcadf1b057fc03e009/build-end.log.
Argh :/
I did test a few packages, but apparently none using github.
Thomas> So I believe this patch should be reverted, or at least the parts Thomas> affecting Github downloads.
I'll revert the github parts.
Signature · 1 line
Bye, Peter Korsgaard
PATCH v3 1/1 change package tarball compression to xz whenever possible
W dniu 09.09.2013 11:33, Peter Korsgaard pisze:
Quoted 19 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Thomas" == Thomas Petazzoni <[email protected]> writes:
Thomas> Peter,
Quoted 1 line · Jerzy Grzegorek
Quoted 1 line
Signed-off-by Jerzy Grzegorek <[email protected]>Thomas> I've seen you committed this patch, but unfortunately it breaks all Thomas> Github downloads. It assumes Github provides a .tar.xz file, but it Thomas> doesn't: even if you request a .tar.xz file from Github, it gives you a Thomas> gzip compressed file:
Thomas> $ wget http://github.com/gandro/input-event-daemon/tarball/v0.1.3/input-event-daemon-v0.1.3.tar.xz
Thomas> [...]
Thomas> $ file input-event-daemon-v0.1.3.tar.xz
Thomas> input-event-daemon-v0.1.3.tar.xz: gzip compressed data, from UnixThomas> This is causing a huge number of build failures in the autobuilders.
Thomas> For example, cpuload:
Thomas> http://autobuild.buildroot.org/results/bcd/bcdf4bdca4d5f8ffc9c84afcadf1b057fc03e009/build-end.log.
Quoted 9 lines
Argh :/
I did test a few packages, but apparently none using github.
Thomas> So I believe this patch should be reverted, or at least the parts Thomas> affecting Github downloads.
I'll revert the github parts.
Hi Thomas, Peter,
Sorry for the confusion. I checked only whether download provides xz-ed tarball files, but I didn't check them.
I will check this patch once more.
Regards,
Jerzy
PATCH v3 1/1 change package tarball compression to xz whenever possible
In reply to Peter KorsgaardQuoted 19 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Thomas" == Thomas Petazzoni <[email protected]> writes:
Thomas> Peter,
Quoted 1 line · Jerzy Grzegorek
Quoted 1 line
Signed-off-by Jerzy Grzegorek <[email protected]>Thomas> I've seen you committed this patch, but unfortunately it breaks all Thomas> Github downloads. It assumes Github provides a .tar.xz file, but it Thomas> doesn't: even if you request a .tar.xz file from Github, it gives you a Thomas> gzip compressed file:
Thomas> $ wget http://github.com/gandro/input-event-daemon/tarball/v0.1.3/input-event-daemon-v0.1.3.tar.xz
Thomas> [...]
Thomas> $ file input-event-daemon-v0.1.3.tar.xz
Thomas> input-event-daemon-v0.1.3.tar.xz: gzip compressed data, from UnixThomas> This is causing a huge number of build failures in the autobuilders.
Thomas> For example, cpuload:
Thomas> http://autobuild.buildroot.org/results/bcd/bcdf4bdca4d5f8ffc9c84afcadf1b057fc03e009/build-end.log.
Quoted 9 lines
Argh :/
I did test a few packages, but apparently none using github.
Thomas> So I believe this patch should be reverted, or at least the parts Thomas> affecting Github downloads.
I'll revert the github parts.
Hi Thomas, Peter,
I checked all these files and indeed even if you request a .tar.xz file from Github, it gives you a gzip compressed file.
All other downloaded xz-ed files changed by this patch seem to really be xz compressed files.
Regards,
Jerzy