ARM: sunxi: Add Emac,SMP and Arch_timer support for sunxi A20;Add phy cnt arch timer for ARMv7 support.
Subsystems (6)
PATCH 1/1 ARM: sunxi: Add Emac,SMP and Arch_timer support for sunxi A20;Add phy cnt arch timer for ARMv7 support.
It has been tested on a Cubieboard 2. To use SMP you must set ARM_ARCH_TIMER and ARM_ARCH_TIMER_USE_PHYCNT when make xconfig.? If you have any questions or comments please feel free to contact me. ?Have a wonderful day!
# On branch master
# Changes to be committed:
# ? (use "git reset HEAD <file>..." to unstage)
#
# new file: ? arch/arm/mach-sunxi/headsmp.S
# new file: ? arch/arm/mach-sunxi/platform.h
# new file: ? arch/arm/mach-sunxi/platsmp.c
#
# Changes not staged for commit:
# ? (use "git add <file>..." to update what will be committed)
# ? (use "git checkout -- <file>..." to discard changes in working directory) #
# modified: ? arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
# modified: ? arch/arm/boot/dts/sun7i-a20.dtsi
# modified: ? arch/arm/include/asm/arch_timer.h
# modified: ? arch/arm/mach-sunxi/Makefile
# modified: ? arch/arm/mach-sunxi/sunxi.c
# modified: ? drivers/clocksource/Kconfig
# modified: ? drivers/clocksource/arm_arch_timer.c
1 Add Emac,SMP and Arch_timer support for sunxi A20 patch:
arch/arm/boot/dts/sun7i-a20-cubieboard2.dts +0 -0
@@ -19,6 +19,22 @@
? compatible = "cubietech,cubieboard2", "allwinner,sun7i-a20";
?
? soc at 01c00000 {
+ emac: ethernet at 01c0b000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&emac_pins_a>;
+ phy = <&phy1>;
+ status = "okay";
+ };
+
+ mdio at 01c0b080 {
+ status = "okay";
+
+ phy1: ethernet-phy at 1 {
+ reg = <1>;
+ };
+ };
+
+
? pinctrl at 01c20800 {
? led_pins_cubieboard2: led_pins at 0 {
? allwinner,pins = "PH20", "PH21";
arch/arm/boot/dts/sun7i-a20.dtsi +0 -0
@@ -20,16 +20,18 @@
? #address-cells = <1>;
? #size-cells = <0>;
?
- cpu at 0 {
+ cpu0: cpu at 0 ?{
? compatible = "arm,cortex-a7";
? device_type = "cpu";
? reg = <0>;
+ clock-frequency = <1000000000>;
? };
?
- cpu at 1 {
+ cpu1: cpu at 1 {
? compatible = "arm,cortex-a7";
? device_type = "cpu";
? reg = <1>;
+ clock-frequency = <1000000000>;
? };
? };
?
@@ -161,12 +163,36 @@
? };
? };
?
+
+
? soc at 01c00000 {
? compatible = "simple-bus";
? #address-cells = <1>;
? #size-cells = <1>;
? ranges;
?
+ cc: cpuconfig at 01c25c00 {
+ compatible = "allwinner,sun7i-cc";
+ reg = <0x01c25c00 0x400>;
+ };
+
+ emac: ethernet at 01c0b000 {
+ compatible = "allwinner,sun4i-emac";
+ reg = <0x01c0b000 0x1000>;
+ interrupts = <0 55 1>;
+ clocks = <&ahb_gates 17>;
+ status = "disabled";
+ };
+
+ mdio: mdio at 01c0b080 {
+ compatible = "allwinner,sun4i-mdio";
+ reg = <0x01c0b080 0x14>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+
? pio: pinctrl at 01c20800 {
? compatible = "allwinner,sun7i-a20-pinctrl";
? reg = <0x01c20800 0x400>;
@@ -198,6 +224,18 @@
? allwinner,drive = <0>;
? allwinner,pull = <0>;
? };
+
+ emac_pins_a: emac0 at 0 {
+ allwinner,pins = "PA0", "PA1", "PA2",
+ "PA3", "PA4", "PA5", "PA6",
+ "PA7", "PA8", "PA9", "PA10",
+ "PA11", "PA12", "PA13", "PA14",
+ "PA15", "PA16";
+ allwinner,function = "emac";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+
? };
?
? timer at 01c20c00 {
@@ -307,5 +345,15 @@
? #interrupt-cells = <3>;
? interrupts = <1 9 0xf04>;
? };
+
+ timer {
+ compatible ="arm,armv7-timer";
+ interrupts = <1 13 0x308>,
+ ? ? <1 14 0x308>,
+ ? ? <1 11 0x308>,
+ ? ? <1 10 0x308>;
+ clock-frequency = <24000000>;
+ };
+
? };
?};
arch/arm/mach-sunxi/Makefile +0 -0
@@ -1 +1,3 @@
?obj-$(CONFIG_ARCH_SUNXI) += sunxi.o
+obj-$(CONFIG_ARCH_SUNXI) += platsmp.o
+obj-$(CONFIG_ARCH_SUNXI) += headsmp.o
arch/arm/mach-sunxi/sunxi.c +0 -0
@@ -137,8 +137,10 @@ static const char * const sunxi_board_dt_compat[] = {
? "allwinner,sun7i-a20",
? NULL,
?};
+extern struct smp_operations sunxi7i_smp_ops;
?
?DT_MACHINE_START(SUNXI_DT, "Allwinner A1X (Device Tree)")
+ .smp = smp_ops(sunxi7i_smp_ops),
? .init_machine = sunxi_dt_init,
? .init_time = sunxi_timer_init,
? .dt_compat = sunxi_board_dt_compat,
/***************************************************/ /***************************************************/ /***************************************************/ 2 Add phy cnt arch timer for ARMv7 support:
arch/arm/include/asm/arch_timer.h +0 -0
@@ -87,6 +87,17 @@ static inline u64 arch_counter_get_cntvct(void)
? return cval;
?}
?
+static inline u64 arch_counter_get_cntpct(void) +{
+ u64 cval;
+
+ isb();
+ asm volatile("mrrc p15, 0, %Q0, %R0, c14" : "=r" (cval));
+ return cval;
+}
+
+
+
?static inline void arch_counter_set_user_access(void) ?{
? u32 cntkctl;
drivers/clocksource/Kconfig +0 -0
@@ -109,3 +109,12 @@ config VF_PIT_TIMER
? bool
? help
? ?Support for Period Interrupt Timer on Freescale Vybrid Family SoCs.
+menu "Clock Source"
+
+config ARM_ARCH_TIMER_USE_PHYCNT
+ bool "Use Physical Count Timer"
+ depends on ARM_ARCH_TIMER
+ ---help---
+ ? ? ? ? ?If bootloader dont set Virtual Offset register,Physical Count Timer is needed to replace Virtual Count Timer. +
+endmenu
drivers/clocksource/arm_arch_timer.c +0 -0
@@ -372,7 +372,11 @@ static u64 arch_counter_get_cntvct_mem(void)
? * to exist on arm64. arm doesn't use this before DT is probed so even ? * if we don't have the cp15 accessors we won't have a problem. ? */
-u64 (*arch_timer_read_counter)(void) = arch_counter_get_cntvct; +#ifdef CONFIG_ARM_ARCH_TIMER_USE_PHYCNT
+ u64 (*arch_timer_read_counter)(void) = arch_counter_get_cntpct;
+#else
+ u64 (*arch_timer_read_counter)(void) = arch_counter_get_cntvct;
+#endif
?
?static cycle_t arch_counter_read(struct clocksource *cs)
?{
@@ -409,8 +413,12 @@ static void __init arch_counter_register(unsigned type)
? u64 start_count;
?
? /* Register the CP15 based counter if we have one */
- if (type & ARCH_CP15_TIMER)
+ if (type & ARCH_CP15_TIMER)
+#ifdef CONFIG_ARM_ARCH_TIMER_USE_PHYCNT
+ arch_timer_read_counter = arch_counter_get_cntpct;
+#else
? arch_timer_read_counter = arch_counter_get_cntvct;
+#endif
? else
? arch_timer_read_counter = arch_counter_get_cntvct_mem;
?
PATCH 1/1 ARM: sunxi: Add Emac,SMP and Arch_timer support for sunxi A20;Add phy cnt arch timer for ARMv7 support.
attachment is patch files.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: add_phy_archtimer.patch
Type: application/octet-stream
Size: 2322 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20130911/bc9cfc56/attachment-0002.obj>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: add_smp_emac_archtimer_forA20.patch
Type: application/octet-stream
Size: 3582 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20130911/bc9cfc56/attachment-0003.obj>
PATCH 1/1 ARM: sunxi: Add Emac,SMP and Arch_timer support for sunxi A20;Add phy cnt arch timer for ARMv7 support.
In reply to ciniHi,
El 10/09/13 13:05, cini escribi?:
Quoted 3 lines
It has been tested on a Cubieboard 2. To use SMP you must set
ARM_ARCH_TIMERandARM_ARCH_TIMER_USE_PHYCNTwhen make xconfig. If you have any questions or comments please feel free to contact me. Have a wonderful day!
First of all, thanks for working on this! It is very much appreciated :)
Having said that, it would be nice to get properly split git patches, with a description and signoff tag. You can read Documentation/SubmittingPatches on the kernel tree (I think it's a bit outdated, but it covers the basics), or watch this video from Greg which explains it nicely:
https://www.youtube.com/watch?v=LLBrBBImJt4
Quoted 7 lines
# On branch master
# Changes to be committed:
# (use "git reset HEAD <file>..." to unstage)
## new file: arch/arm/mach-sunxi/headsmp.S # new file: arch/arm/mach-sunxi/platform.h # new file: arch/arm/mach-sunxi/platsmp.c
I couldn't find these files on either of your emails by the way
Quoted 65 lines
#
# Changes not staged for commit:
# (use "git add <file>..." to update what will be committed)
# (use "git checkout -- <file>..." to discard changes in working directory)
## modified: arch/arm/boot/dts/sun7i-a20-cubieboard2.dts # modified: arch/arm/boot/dts/sun7i-a20.dtsi # modified: arch/arm/include/asm/arch_timer.h # modified: arch/arm/mach-sunxi/Makefile # modified: arch/arm/mach-sunxi/sunxi.c # modified: drivers/clocksource/Kconfig # modified: drivers/clocksource/arm_arch_timer.c1 Add Emac,SMP and
Arch_timersupport for sunxi A20 patch:arch/arm/boot/dts/sun7i-a20-cubieboard2.dts +16
-0@@ -19,6 +19,22 @@ compatible = "cubietech,cubieboard2", "allwinner,sun7i-a20"; soc at 01c00000 { + emac: ethernet at 01c0b000 { + pinctrl-names = "default"; + pinctrl-0 = <&emac_pins_a>; + phy = <&phy1>; + status = "okay"; + }; + + mdio at 01c0b080 { + status = "okay"; + + phy1: ethernet-phy at 1 { + reg = <1>; + }; + }; + + pinctrl at 01c20800 { led_pins_cubieboard2: led_pins at 0 { allwinner,pins = "PH20", "PH21";arch/arm/boot/dts/sun7i-a20.dtsi +0
-0
arch/arm/boot/dts/sun7i-a20.dtsi line 27
Quoted 9 lines
arch/arm/boot/dts/sun7i-a20.dtsi +2
-1@@ -20,16 +20,18 @@ #address-cells = <1>; #size-cells = <0>; - cpu at 0 { + cpu0: cpu at 0 { compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <0>; + clock-frequency = <1000000000>;
Is this frequency correct? I thought A20 cores ran on 900-something MHz
Quoted 170 lines
arch/arm/boot/dts/sun7i-a20.dtsi +48
-1}; - cpu at 1 { + cpu1: cpu at 1 { compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <1>; + clock-frequency = <1000000000>; }; };@@ -161,12 +163,36 @@ }; }; + + soc at 01c00000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; + cc: cpuconfig at 01c25c00 { + compatible = "allwinner,sun7i-cc"; + reg = <0x01c25c00 0x400>; + }; + + emac: ethernet at 01c0b000 { + compatible = "allwinner,sun4i-emac"; + reg = <0x01c0b000 0x1000>; + interrupts = <0 55 1>; + clocks = <&ahb_gates 17>; + status = "disabled"; + }; + + mdio: mdio at 01c0b080 { + compatible = "allwinner,sun4i-mdio"; + reg = <0x01c0b080 0x14>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + pio: pinctrl at 01c20800 { compatible = "allwinner,sun7i-a20-pinctrl"; reg = <0x01c20800 0x400>;@@ -198,6 +224,18 @@ allwinner,drive = <0>; allwinner,pull = <0>; }; + + emac_pins_a: emac0 at 0 { + allwinner,pins = "PA0", "PA1", "PA2", + "PA3", "PA4", "PA5", "PA6", + "PA7", "PA8", "PA9", "PA10", + "PA11", "PA12", "PA13", "PA14", + "PA15", "PA16"; + allwinner,function = "emac"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + }; timer at 01c20c00 {@@ -307,5 +345,15 @@ #interrupt-cells = <3>; interrupts = <1 9 0xf04>; }; + + timer { + compatible ="arm,armv7-timer"; + interrupts = <1 13 0x308>, + <1 14 0x308>, + <1 11 0x308>, + <1 10 0x308>; + clock-frequency = <24000000>; + }; + }; };arch/arm/mach-sunxi/Makefile +2
-0@@ -1 +1,3 @@ obj-$(CONFIG_ARCH_SUNXI) += sunxi.o +obj-$(CONFIG_ARCH_SUNXI) += platsmp.o +obj-$(CONFIG_ARCH_SUNXI) += headsmp.oarch/arm/mach-sunxi/sunxi.c +2
-0@@ -137,8 +137,10 @@ static const char * const sunxi_board_dt_compat[] = {"allwinner,sun7i-a20" , NULL, }; +extern struct smp_operations sunxi7i_smp_ops;DT_MACHINE_START (SUNXI_DT ,"Allwinner A1X (Device Tree)" ) + .smp = smp_ops(sunxi7i_smp_ops), .init_machine = sunxi_dt_init, .init_time = sunxi_timer_init, .dt_compat = sunxi_board_dt_compat,/***************************************************/ /***************************************************/ /***************************************************/ 2 Add phy cnt arch timer for ARMv7 support:
arch/arm/include/asm/arch_timer.h +11
-0@@ -87,6 +87,17 @@ static inline u64 arch_counter_get_cntvct(void)return cval; } +static inline u64 arch_counter_get_cntpct (void ) +{ +u64 cval; + +isb (); + asmvolatile ("mrrc p15, 0, %Q0, %R0, c14" :"=r" (cval)); +return cval; +} + + +static inline void arch_counter_set_user_access (void ) {u32 cntkctl;drivers/clocksource/Kconfig +9
-0@@ -109,3 +109,12 @@ config VF_PIT_TIMER bool help Support for Period Interrupt Timer on Freescale Vybrid Family SoCs. +menu "Clock Source" + +config ARM_ARCH_TIMER_USE_PHYCNT + bool "Use Physical Count Timer" + depends on ARM_ARCH_TIMER + ---help--- + If bootloader dont set Virtual Offset register,Physical Count Timer is needed to replace Virtual Count Timer. + +endmenudrivers/clocksource/arm_arch_timer.c +0
-0
drivers/clocksource/arm_arch_timer.c static u64 arch_counter_get_cntvct_mem(void) · line 379
Quoted 9 lines
drivers/clocksource/arm_arch_timer.c +5
-1@@ -372,7 +372,11 @@ static u64 arch_counter_get_cntvct_mem(void)* to exist on arm64. arm doesn't use this before DT is probed so even * if we don't have the cp15 accessors we won't have a problem. */ -u64 (*arch_timer_read_counter)(void) = arch_counter_get_cntvct; +#ifdef CONFIG_ARM_ARCH_TIMER_USE_PHYCNT +u64 (*arch_timer_read_counter)(void) = arch_counter_get_cntpct; +#else +u64 (*arch_timer_read_counter)(void) = arch_counter_get_cntvct; +#endif
This will certainly not play nice with multiplatform kernel. Is this something we can fix on u-boot to use the virtual count timer as the rest of the platforms do?
Cheers,
Emilio
PATCH 1/1 ARM: sunxi: Add Emac,SMP and Arch_timer support for sunxi A20;Add phy cnt arch timer for ARMv7 support.
Quoted 9 lines
Hi,
El?10/09/13?13:05,?cini?escribi?:
Quoted 3 lines
?It?has?been?tested?on?a?Cubieboard?2.?To?use?SMP?you?must?set?ARM_ARCH_TIMER?and?ARM_ARCH_TIMER_USE_PHYCNT?when?make?xconfig. ?If?you?have?any?questions?or?comments?please?feel?free?to?contact?me.??Have?a?wonderful?day!
First?of?all,?thanks?for?working?on?this!?It?is?very?much?appreciated?:)
Quoted 8 lines
Having?said?that,?it?would?be?nice?to?get?properly?split?git?patches,? with?a?description?and?signoff?tag.?You?can?read? Documentation/SubmittingPatches?on?the?kernel?tree?(I?think?it's?a?bit? outdated,?but?it?covers?the?basics),?or?watch?this?video?from?Greg?which? explains?it?nicely:
Thanks for your response.This is my first patch.I will notice the problem you said.
Quoted 10 lines
Quoted 7 lines
?#?On?branch?master
?#?Changes?to?be?committed:
?#???(use?"git?reset?HEAD?<file>..."?to?unstage)
?#
?# new?file:???arch/arm/mach-sunxi/headsmp.S
?# new?file:???arch/arm/mach-sunxi/platform.h
?# new?file:???arch/arm/mach-sunxi/platsmp.cI?couldn't?find?these?files?on?either?of?your?emails?by?the?way
Sorry for thar, I check the patch. as you said,the new files can not found,I will update a new patch including the new files later.?
Quoted 1 line
Is?this?frequency?correct??I?thought?A20?cores?ran?on?900-something?MHz
A20 manual said the cpu can run 1.2G.
Quoted 8 lines
This?will?certainly?not?play?nice?with?multiplatform?kernel.?Is?this? something?we?can?fix?on?u-boot?to?use?the?virtual?count?timer?as?the? rest?of?the?platforms?do?
Cheers,
EmilioYes,
you are right,Phy Count Register can not be accessed in Non-secure PL1 mode when register CNTHCTL.PL1PCTEN=0.So we can set CNTHCTL.PL1PCTEN=1 in bootloader then ?other multiplatform?kernel should run ok with phy count in any mode. If kernel want use ?virtual count timer ,bootloader should set register CNTVOFF=0.On the other way,I think we can get a new nvct= vct-vntvoff as clksource, then kernel can work well even if?CNTVOFF does not set to zero ?by bootload, I will give the patch later.?
PATCH 1/1 ARM: sunxi: Add Emac,SMP and Arch_timer support for sunxi A20;Add phy cnt arch timer for ARMv7 support.
This is a new patch(add_smp_emac_archtimer_forA20.patch) including miss files.plz replace old add_smp_emac_archtimer_forA20.patch.? This is boot log:
Starting kernel ...
[ ? ?0.000000] Booting Linux on physical CPU 0x0
[ ? ?0.000000] Linux version 3.11.0-next-20130903-dirty (root at cini-VirtualBox) (gcc version 4.7.3 (Sourcery CodeBench Lite 2013.05-24) ) #137 SMP Tue Sep 10 23:13:01 CST 2013 [ ? ?0.000000] CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=10c53c7d
[ ? ?0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ ? ?0.000000] Machine: Allwinner A1X (Device Tree), model: Cubietech Cubieboard2
[ ? ?0.000000] Memory policy: ECC disabled, Data cache writealloc
[ ? ?0.000000] [sunxi7i_smp_init_cpus] ncores=2
[ ? ?0.000000] PERCPU: Embedded 7 pages/cpu @c0ef6000 s6464 r8192 d14016 u32768
[ ? ?0.000000] Built 1 zonelists in Zone order, mobility grouping on. ?Total pages: 260624
[ ? ?0.000000] Kernel command line: console=ttyS0,115200
[ ? ?0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ ? ?0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ ? ?0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ ? ?0.000000] Memory: 1032396K/1048576K available (3439K kernel code, 179K rwdata, 980K rodata, 1966K init, 482K bss, 16180K reserved, 270336K highmem) [ ? ?0.000000] Virtual kernel memory layout:
[ ? ?0.000000] ? ? vector ?: 0xffff0000 - 0xffff1000 ? ( ? 4 kB)
[ ? ?0.000000] ? ? fixmap ?: 0xfff00000 - 0xfffe0000 ? ( 896 kB)
[ ? ?0.000000] ? ? vmalloc : 0xf0000000 - 0xff000000 ? ( 240 MB)
[ ? ?0.000000] ? ? lowmem ?: 0xc0000000 - 0xef800000 ? ( 760 MB)
[ ? ?0.000000] ? ? pkmap ? : 0xbfe00000 - 0xc0000000 ? ( ? 2 MB)
[ ? ?0.000000] ? ? modules : 0xbf000000 - 0xbfe00000 ? ( ?14 MB)
[ ? ?0.000000] ? ? ? .text : 0xc0008000 - 0xc0458f3c ? (4420 kB)
[ ? ?0.000000] ? ? ? .init : 0xc0459000 - 0xc0644940 ? (1967 kB)
[ ? ?0.000000] ? ? ? .data : 0xc0646000 - 0xc0672ec0 ? ( 180 kB)
[ ? ?0.000000] ? ? ? ?.bss : 0xc0672ec8 - 0xc06eba54 ? ( 483 kB)
[ ? ?0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ ? ?0.000000] Hierarchical RCU implementation.
[ ? ?0.000000] ?RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ ? ?0.000000] NR_IRQS:16 nr_irqs:16 16
[ ? ?0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[ ? ?0.000000] Architected cp15 timer(s) running at 24.00MHz (virt).
[ ? ?0.000000] Switching to timer-based delay loop
[ ? ?0.000000] sched_clock: ARM arch timer >56 bits at 24000kHz, resolution 41ns
[ ? ?0.000000] Console: colour dummy device 80x30
[ ? 15.060670] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[ ? 15.060684] pid_max: default: 32768 minimum: 301
[ ? 15.060824] Mount-cache hash table entries: 512
[ ? 15.061500] CPU: Testing write buffer coherency: ok
[ ? 15.061788] CPU0: update cpu_power 1024
[ ? 15.061801] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ ? 15.061835] Setting up static identity map for 0xc0343f70 - 0xc0343fa4
[ ? 15.062610] [sunxi7i_boot_secondary] enter cpu 1
[ ? 15.062674] cc_base is f0020c00
[ ? 15.073695] CPU1: Booted secondary processor
[ ? 15.073729] CPU1: update cpu_power 1024
[ ? 15.073735] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ ? 15.073843] Brought up 2 CPUs
[ ? 15.073861] SMP: Total of 2 processors activated.
[ ? 15.073866] CPU: All CPU(s) started in SVC mode.
[ ? 15.074533] devtmpfs: initialized
[ ? 15.077992] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 4
[ ? 15.078161] pinctrl core: initialized pinctrl subsystem
[ ? 15.078317] regulator-dummy: no parameters
[ ? 15.079295] NET: Registered protocol family 16
[ ? 15.079546] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ ? 15.083223] bio: create slab <bio-0> at 0
[ ? 15.084390] Switched to clocksource arch_sys_counter
[ ? 15.089338] NET: Registered protocol family 2
[ ? 15.089919] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ ? 15.090092] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ ? 15.090212] TCP: Hash tables configured (established 8192 bind 8192)
[ ? 15.090290] TCP: reno registered
[ ? 15.090303] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ ? 15.090359] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ ? 15.090942] RPC: Registered named UNIX socket transport module.
[ ? 15.090955] RPC: Registered udp transport module.
[ ? 15.090960] RPC: Registered tcp transport module.
[ ? 15.090966] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ ? 15.220334] bounce pool size: 64 pages
[ ? 15.227490] NFS: Registering the id_resolver key type
[ ? 15.227577] Key type id_resolver registered
[ ? 15.227586] Key type id_legacy registered
[ ? 15.227601] Installing knfsd (copyright (C) 1996 okir at monad.swb.de).
[ ? 15.228087] fuse init (API version 7.22)
[ ? 15.229159] Key type asymmetric registered
[ ? 15.229171] Asymmetric key parser 'x509' registered
[ ? 15.229369] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[ ? 15.229380] io scheduler noop registered
[ ? 15.229386] io scheduler deadline registered
[ ? 15.229523] io scheduler cfq registered (default)
[ ? 15.231164] sunxi-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
[ ? 15.262592] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ ? 15.283675] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 33, base_baud = 1500000) is a U6_16550A
[ ? 15.746682] console [ttyS0] enabled
[ ? 15.755447] brd: module loaded
[ ? 15.758582] sun4i-mdio 1c0b080.mdio: no regulator found
[ ? 15.763792] libphy: sun4i_mii_bus: probed
[ ? 15.804858] sun4i-emac 1c0b000.ethernet: using random MAC address c6:9a:96:62:ad:9b
[ ? 15.814192] sun4i-emac 1c0b000.ethernet: eth0: at f006c000, IRQ 87 MAC: c6:9a:96:62:ad:9b
[ ? 15.822582] mousedev: PS/2 mouse device common for all mice
[ ? 15.828377] sdhci: Secure Digital Host Controller Interface driver
[ ? 15.834470] sdhci: Copyright(c) Pierre Ossman
[ ? 15.838751] sdhci-pltfm: SDHCI platform and OF driver helper
[ ? 15.844936] ipip: IPv4 over IPv4 tunneling driver
[ ? 15.850116] TCP: cubic registered
[ ? 15.853490] Key type dns_resolver registered
[ ? 15.860975] Freeing unused kernel memory: 1964K (c0459000 - c0644000)
Fiddlesticks login:?
Fiddlesticks login: root
-------------- next part --------------
A non-text attachment was scrubbed...
Name: add_smp_emac_archtimer_forA20.patch
Type: application/octet-stream
Size: 25670 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20130911/eacb841e/attachment-0001.obj>
PATCH 1/1 ARM: sunxi: Add Emac,SMP and Arch_timer support for sunxi A20;Add phy cnt arch timer for ARMv7 support.
In reply to ciniHi Cini,
Quoted 4 lines · cini
It has been tested on a Cubieboard 2. To use SMP you must set
ARM_ARCH_TIMERandARM_ARCH_TIMER_USE_PHYCNTwhen make xconfig.? If you have any questions or comments please feel free to contact me. ?Have a wonderful day!
Thanks for working on this!
You still have to work a bit on the submission part however.
First, make sure you read and follow
http://www.tuxradar.com/content/newbies-guide-hacking-linux-kernel
along with Documentation/SubmittingPatches
Basically, you should use git format-patch and git send-email to easily contribute your patches to the right format.
Among other things, your current patches lack some files (platsmp.c, headsmp.S, etc.), also lack the Signed-off-by tag (using your real name).
You should also try to split the changes you're making into logical changes.
In that case, that means that you would probably have different patches to :
- Add the SMP code to mach-sunxi
- Add the SMP-related nodes to the DTSI
- Make the modifications to the arch timers
- And add the EMAC support
Finally, you should probably look at
http://linux-sunxi.org/Mainlining_Effort to get in sync with other people doing sunxi-related stuff to avoid effort duplication.
Thanks,
Maxime
Signature · 10 lines
Maxime Ripard, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20130911/03027161/attachment.sig>
PATCH 1/1 ARM: sunxi: Add Emac,SMP and Arch_timer support for sunxi A20;Add phy cnt arch timer for ARMv7 support.
I have send the patch including all files is at http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20130911/eacb841e/attachment-0001.obj in pre mail. I will reupdate the path as you said later. Thanks for your advice.
PATCH 1/1 ARM: sunxi: Add Emac,SMP and Arch_timer support for sunxi A20; Add phy cnt arch timer for ARMv7 support.
In reply to ciniHi Cini,
very nice work. You could join other people that hack on sunxi kernels using the information here:
http://linux-sunxi.org/sunxi:Community_portal
Please subscribe to our mailing list to stay tuned. Also, our IRC channel is very active and friendly.
Best,
Arokux
PATCH 1/1 ARM: sunxi: Add Emac,SMP and Arch_timer support for sunxi A20;Add phy cnt arch timer for ARMv7 support.
In reply to ciniI have released the new patchs that is clean? 0001-Add-smp-support-for-Allwinner-A20-sunxi-7i.patch 0002-Add-cpuconfig-nodes-in-dts-for-smp-configure.patch 0003-Add-physical-count-arch-timer-support-for-clocksourc.patch 0004-Add-arch-count-timer-node-in-dts-for-Allwinner-A20-s.patch 0005-Add-emac-node-for-Allwinner-A20-sun7i.patch 0006-Add-emac-node-in-dts-for-CubieBoard2.patch
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 0001-Add-smp-support-for-Allwinner-A20-sunxi-7i.patch
Type: application/octet-stream
Size: 22871 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20130912/43f1f568/attachment-0006.obj>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 0002-Add-cpuconfig-nodes-in-dts-for-smp-configure.patch
Type: application/octet-stream
Size: 1106 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20130912/43f1f568/attachment-0007.obj>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 0003-Add-physical-count-arch-timer-support-for-clocksourc.patch
Type: application/octet-stream
Size: 2753 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20130912/43f1f568/attachment-0008.obj>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 0004-Add-arch-count-timer-node-in-dts-for-Allwinner-A20-s.patch
Type: application/octet-stream
Size: 857 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20130912/43f1f568/attachment-0009.obj>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 0005-Add-emac-node-for-Allwinner-A20-sun7i.patch
Type: application/octet-stream
Size: 1419 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20130912/43f1f568/attachment-0010.obj>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 0006-Add-emac-node-in-dts-for-CubieBoard2.patch
Type: application/octet-stream
Size: 1046 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20130912/43f1f568/attachment-0011.obj>
PATCH 1/1 ARM: sunxi: Add Emac,SMP and Arch_timer support for sunxi A20;Add phy cnt arch timer for ARMv7 support.
Hi Fan,
Quoted 7 lines · cini
I have released the new patchs that is clean? 0001-Add-smp-support-for-Allwinner-A20-sunxi-7i.patch 0002-Add-cpuconfig-nodes-in-dts-for-smp-configure.patch 0003-Add-physical-count-arch-timer-support-for-clocksourc.patch 0004-Add-arch-count-timer-node-in-dts-for-Allwinner-A20-s.patch 0005-Add-emac-node-for-Allwinner-A20-sun7i.patch 0006-Add-emac-node-in-dts-for-CubieBoard2.patch
Great, you're almost there.
Usually, we split up the series by what they are actually doing. In your case, that would mean that you would send two set of patches, one for the SMP support on the A20, and one for your arch timer patches. I already sent a serie about the EMAC, so you can probably drop that one.
And to send these two series, you should send your patches in the mail directly. git send-email makes that really easy, so I'd advise you to actually use it. Along with these patches, we most of the time also send a cover letter to introduce what we're doing in these patches, the difficulties/drawbacks we faced, etc. In your case for example, this is pretty much where you should put that you don't use the scu, and why you don't use it. Finally, you should send it the relevant maintainers of the files touched by your patches. You can get it quite easily by using the get_maintainers.pl script in the scripts/ directory.
Don't forget to run the scrits/checkpatch.pl script on your patches, and you'll be all set!
Thanks for your efforts,
Maxime
Signature · 10 lines
Maxime Ripard, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20130911/ce03a387/attachment.sig>