Merge and reformat boards.cfg and MAINTAINERS
PATCH 1/1 Merge and reformat boards.cfg and MAINTAINERS
Merge information from MAINTAINERS into boards.cfg, remove MAINTAINERS and reformat boards.cfg.
PATCH v2 1/1 Merge and reformat boards.cfg and MAINTAINERS
Put all informations about targets, including state (active or orphan) and maintainers, in boards.cfg; remove MAINTAINERS; adjust the build system accordingly.
---
V2:
- updated with latest boards.cfg/MAINTAINER info
- fixed wrong maintainer(s) for orphan boards
- fixed wrong maintainer(s) for base:options case
- fixed lingering misuses of boards.cfg and MAINTAINERS
V1:
- initial submission from squashed RFC patch series
MAINTAINERS | 1412 ---------------------------- MAKEALL | 51 +- Makefile | 2 +- README | 6 +- boards.cfg | 2345 ++++++++++++++++++++++++----------------------- mkconfig | 31 +- tools/buildman/board.py | 2 +- tools/reformat.py | 132 +++ 8 files changed, 1350 insertions(+), 2631 deletions(-) delete mode 100644 MAINTAINERS create mode 100755 tools/reformat.py
MAINTAINERS deleted +0 -1412
@@ -1,1412 +0,0 @@ -######################################################################### -# # -# Regular Maintainers for U-Boot board support: # -# # -# For any board without permanent maintainer, please contact # -# Wolfgang Denk <[email protected]> # -# and Cc: the <[email protected]> mailing list. # -# # -# Note: lists sorted by Maintainer Name # -# Note: These are the maintainers for specific *boards*. The # -# custodians for general architectures and subsystems can # -# be found here -- http://www.denx.de/wiki/U-Boot/Custodians # -# # -######################################################################### - - -######################################################################### -# PowerPC Systems: # -# # -# Maintainer Name, Email Address # -# Board CPU # -######################################################################### - -Poonam Aggrwal <[email protected]> - - P2020RDB P2020 - - BSC9131RDB BSC9131 - -Naveen Burmi <[email protected]> - - BSC9132QDS BSC9132 - -Greg Allen <[email protected]> - - UTX8245 MPC8245 - -Pantelis Antoniou <[email protected]> - - NETVIA MPC8xx - -Reinhard Arlt <[email protected]> - - cpci5200 MPC5200 - mecp5123 MPC5121 - mecp5200 MPC5200 - pf5200 MPC5200 - - caddy2 MPC8349 - vme8349 MPC8349 - - CPCI750 PPC750FX/GX - -Peter Barada <[email protected]> - - omap3_logic ARM ARMV7 (Logic OMAP35xx/DM37xx) - -Yuli Barcohen <[email protected]> - - Adder MPC87x/MPC852T - ep8248 MPC8248 - ISPAN MPC8260 - MPC8260ADS MPC826x/MPC827x/MPC8280 - Rattler MPC8248 - ZPC1900 MPC8265 - -Michael Barkowski <[email protected]> - - MPC8323ERDB MPC8323 - -Jerry Van Baren <[email protected]> - - sacsng MPC8260 - -Oliver Brown <[email protected]> - - gw8260 MPC8260 - -Holger Brunck <[email protected]> - - kmeter1 MPC8360 - kmcoge5ne MPC8360 - mgcoge MPC8247 - mgcoge3ne MPC8247 - suvd3 MPC8321 - tuge1 MPC8321 - tuxx1 MPC8321 - -Conn Clark <[email protected]> - - ESTEEM192E MPC8xx - -Jason Cooper <[email protected]> - - dreamplug ARM926EJS (Kirkwood SoC) - -Joe D'Abbraccio <[email protected]> - - MPC837xERDB MPC837x - -K?ri Dav??sson <[email protected]> - - FLAGADM MPC823 - -Torsten Demke <[email protected]> - - eXalion MPC824x - -Wolfgang Denk <[email protected]> - - IceCube_5200 MPC5200 - - ARIA MPC5121e - - FPS850L MPC850 - FPS860L MPC860 - ICU862 MPC862 - IP860 MPC860 - IVML24 MPC860 - IVML24_128 MPC860 - IVML24_256 MPC860 - IVMS8 MPC860 - IVMS8_128 MPC860 - IVMS8_256 MPC860 - LWMON MPC823 - R360MPI MPC823 - RRvision MPC823 - SM850 MPC850 - SPD823TS MPC823 - TQM823L MPC823 - TQM823L_LCD MPC823 - TQM850L MPC850 - TQM855L MPC855 - TQM860L MPC860 - TQM860L_FEC MPC860 - hermes MPC860 - lwmon MPC823 - - CU824 MPC8240 - Sandpoint8240 MPC8240 - - ATC MPC8250 - PM825 MPC8250 - - TQM8255 MPC8255 - - CPU86 MPC8260 - PM826 MPC8260 - TQM8260 MPC8260 - - P3G4 MPC7410 - -Phil Edworthy <[email protected]> - - rsk7264 SH7264 - -egnite GmbH <[email protected]> - - ethernut5 ARM926EJS (AT91SAM9XE SoC) - -Dirk Eibach <[email protected]> - - controlcenterd P1022 - devconcenter PPC460EX - dlvision PPC405EP - dlvision-10g PPC405EP - gdppc440etx PPC440EP/GR - intip PPC460EX - io PPC405EP - io64 PPC405EX - iocon PPC405EP - neo PPC405EP - -Dave Ellis <[email protected]> - - SXNI855T MPC8xx - -Thomas Frieden <[email protected]> - - AmigaOneG3SE MPC7xx - -Matthias Fuchs <[email protected]> - - APC405 PPC405GP - AR405 PPC405GP - ASH405 PPC405EP - CPCI2DP PPC405GP - CPCI405 PPC405GP - CPCI4052 PPC405GP - CPCI405AB PPC405GP - CPCI405DT PPC405GP - CPCIISER4 PPC405GP - DP405 PPC405EP - DU405 PPC405GP - DU440 PPC440EPx - G2000 PPC405EP - HH405 PPC405EP - HUB405 PPC405EP - OCRTC PPC405GP - ORSG PPC405GP - PCI405 PPC405GP - PLU405 PPC405EP - PMC405 PPC405GP - PMC405DE PPC405EP - PMC440 PPC440EPx - VOH405 PPC405EP - VOM405 PPC405EP - WUH405 PPC405EP - CMS700 PPC405EP - -Siddarth Gore <[email protected]> - - guruplug ARM926EJS (Kirkwood SoC) - -Paul Gortmaker <[email protected]> - - sbc8349 MPC8349 - sbc8548 MPC8548 - sbc8641d MPC8641D - -Frank Gottschling <[email protected]> - - MHPC MPC8xx - -Wolfgang Grandegger <[email protected]> - - ipek01 MPC5200 - - PN62 MPC8240 - IPHASE4539 MPC8260 - -Anatolij Gustschin <[email protected]> - - ac14xx MPC5121e - O2D MPC5200 - O2D300 MPC5200 - O2DNT2 MPC5200 - O2I MPC5200 - O2MNT MPC5200 - O3DNT MPC5200 - -Rob Herring <[email protected]> - - highbank highbank - -Klaus Heydeck <[email protected]> - - KUP4K MPC855 - KUP4X MPC859 - -Gabriel Huau <[email protected]> - - mini2440 s3c2440 - -Gary Jennejohn <[email protected]> - - quad100hd PPC405EP - -Murray Jensen <[email protected]> - - cogent_mpc8xx MPC8xx - - cogent_mpc8260 MPC8260 - hymod MPC8260 - -Larry Johnson <[email protected]> - - korat PPC440EPx - -Feng Kan <[email protected]> - - redwood PPC4xx - -Brad Kemp <[email protected]> - - ppmc8260 MPC8260 - -Sangmoon Kim <[email protected]> - - debris MPC8245 - KVME080 MPC8245 - -The LEOX team <[email protected]> - - ELPT860 MPC860T - -Guennadi Liakhovetski <[email protected]> - - linkstation MPC8241 - -Dave Liu <[email protected]> - - MPC8315ERDB MPC8315 - MPC832XEMDS MPC832x - MPC8360EMDS MPC8360 - MPC837XEMDS MPC837x - -Nye Liu <[email protected]> - - ZUMA MPC7xx_74xx - -Kumar Gala <[email protected]> - - MPC8540ADS MPC8540 - MPC8560ADS MPC8560 - MPC8541CDS MPC8541 - MPC8555CDS MPC8555 - - MPC8641HPCN MPC8641D - -Ron Madrid <[email protected]> - - SIMPC8313 MPC8313 - -Dan Malek <[email protected]> - - stxgp3 MPC85xx - stxssa MPC85xx - stxxtc MPC8xx - -Ryan Mallon <[email protected]> - - snapper9260 ARM926EJS (AT91SAM9260 SoC) - snapper9g20 ARM926EJS (AT91SAM9G20 SoC) - -Andrea "llandre" Marson <[email protected]> - - PPChameleonEVB PPC405EP - -Tirumala Marri <[email protected]> - - bluestone APM821XX - -Reinhard Meyer <[email protected]> - - TOP860 MPC860T - TOP5200 MPC5200 - TOP9000 ARM926EJS (AT91SAM9xxx SoC) - -Kyle Moffett <[email protected]> - - HWW1U1A P2020 - -Tolunay Orkun <[email protected]> - - csb272 PPC405GP - csb472 PPC405GP - -John Otken <[email protected]> - - luan PPC440SP - taihu PPC405EP - -Keith Outwater <[email protected]> - - GEN860T MPC860T - GEN860T_SC MPC860T - -Frank Panno <[email protected]> - - ep8260 MPC8260 - -Chan-Taek Park <[email protected]> - - tnetv107x_evm tnetv107x - -Denis Peter <[email protected]> - - MIP405 PPC4xx - PIP405 PPC4xx - -Werner Pfister <[email protected]> - digsy_mtc mpc5200 - digsy_mtc_rev5 mpc5200 - -Kim Phillips <[email protected]> - - MPC8349EMDS MPC8349 - -Sergei Poselenov <[email protected]> - - a4m072 MPC5200 - -Sudhakar Rajashekhara <[email protected]> - - da850evm ARM926EJS (DA850/OMAP-L138) - -Ricardo Ribalda <[email protected]> - - ml507 PPC440x5 - v5fx30teval PPC440x5 - xilinx-ppc405-generic PPC405 - xilinx-ppc440-generic PPC440x5 - -Stefan Roese <[email protected]> - - a3m071 MPC5200 - a4m2k MPC5200 - - P3M7448 MPC7448 - - uc100 MPC857 - - acadia PPC405EZ - alpr PPC440GX - bamboo PPC440EP - bunbinga PPC405EP - canyonlands PPC460EX - ebony PPC440GP - glacier PPC460GT - haleakala PPC405EXr - icon PPC440SPe - katmai PPC440SPe - kilauea PPC405EX - lwmon5 PPC440EPx - makalu PPC405EX - ocotea PPC440GX - p3p440 PPC440GP - pcs440ep PPC440EP - rainier PPC440GRx - sequoia PPC440EPx - sycamore PPC405GPr - t3corp PPC460GT - taishan PPC440GX - walnut PPC405GP - yellowstone PPC440GR - yosemite PPC440EP - zeus PPC405EP - - P3M750 PPC750FX/GX/GL - -Yusdi Santoso <[email protected]> - - HIDDEN_DRAGON MPC8241/MPC8245 - -Travis Sawyer (travis.sawyer at sandburst.com> - - KAREF PPC440GX - METROBOX PPC440GX - -Georg Schardt <[email protected]> - - fx12mm PPC405 - -Heiko Schocher <[email protected]> - - cam_enc_4xx davinci/ARM926EJS - charon MPC5200 - ids8247 MPC8247 - ipam390 davinci/ARM926EJS - jupiter MPC5200 - kmsupx5 MPC8321 - mucmc52 MPC5200 - muas3001 MPC8270 - municse MPC5200 - sc3 PPC405GP - uc101 MPC5200 - ve8313 MPC8313 - -Andre Schwarz <[email protected]> - - mergerbox MPC8377 - mvbc_p MPC5200 - mvblm7 MPC8343 - mvsmr MPC5200 - -Inderpal Singh <[email protected]> - - Arndale ARM ARMV7 (EXYNOS5250 SoC) - -Jon Smirl <[email protected]> - - pcm030 MPC5200 - -Ira W. Snyder <[email protected]> - - P2020COME P2020 - -York Sun <[email protected]> - - T4240EMU T4240 - -Timur Tabi <[email protected]> - - MPC8349E-mITX MPC8349 - MPC8349E-mITX-GP MPC8349 - P1022DS P1022 - -Erik Theisen <[email protected]> - - W7OLMC PPC4xx - W7OLMG PPC4xx - -Jim Thompson <[email protected]> - - MUSENKI MPC8245/8241 - Sandpoint8245 MPC8245 - -Rune Torgersen <[email protected]> - - MPC8266ADS MPC8266 - -Peter Tyser <[email protected]> - - xpedite1000 PPC440GX - xpedite5170 MPC8640 - xpedite5200 MPC8548 - xpedite5370 MPC8572 - xpedite5500 P2020 - -David Updegraff <[email protected]> - - CRAYL1 PPC4xx - -Anton Vorontsov <[email protected]> - - MPC8360ERDK MPC8360 - -Josef Wagner <[email protected]> - - CPC45 MPC8245 - PM520 MPC5200 - -Michael Weiss <[email protected]> - - PDM360NG MPC5121e - -Stephen Williams <[email protected]> - - JSE PPC405GPr - -Ilya Yanok <[email protected]> - - mpc8308_p1m MPC8308 - MPC8308RDB MPC8308 - -Roy Zang <[email protected]> - - mpc7448hpc2 MPC7448 - P1023RDS P1023 - -John Zhan <[email protected]> - - svm_sc8xx MPC8xx - -Detlev Zundel <[email protected]> - - inka4x0 MPC5200 - -Po Liu <[email protected]> - - C29XPCIE C29X - -------------------------------------------------------------------------- - -Unknown / orphaned boards: - - ADS860 MPC8xx - FADS823 MPC8xx - FADS850SAR MPC8xx - FADS860T MPC8xx - GENIETV MPC8xx - MBX MPC8xx - MBX860T MPC8xx - NX823 MPC8xx - RPXClassic MPC8xx - RPXlite MPC8xx - - MOUSSE MPC824x - - RPXsuper MPC8260 - rsdproto MPC8260 - - EVB64260 MPC7xx_74xx - EVB64260_750CX MPC750CX [Eran Man <[email protected]>] - - versatile ARM926EJ-S - -######################################################################### -# ARM Systems: # -# # -# Maintainer Name, Email Address # -# Board CPU # -######################################################################### - -Albert ARIBAUD <[email protected]> - - edminiv2 ARM926EJS (Orion5x SoC) - -Raphael Assenat <[email protected]> - - eco5pk ARM ARMV7 (AM35x SoC) - -Stefano Babic <[email protected]> - - ea20 davinci - flea3 i.MX35 - mt_ventoux omap3 - mx35pdk i.MX35 - mx51evk i.MX51 - polaris xscale/pxa - trizepsiv xscale/pxa - twister omap3 - vision2 i.MX51 - woodburn i.MX35 - -Lukasz Dalek <[email protected]> - - h2200 xscale/pxa - -Jason Liu <[email protected]> - - mx53evk i.MX53 - mx53loco i.MX53 - mx6qarm2 i.MX6Q - -Enric Balletbo i Serra <[email protected]> - - igep0020 ARM ARMV7 (OMAP3xx SoC) - igep0030 ARM ARMV7 (OMAP3xx SoC) - igep0032 ARM ARMV7 (OMAP3xx SoC) - igep0033 ARM ARMV7 (AM33xx Soc) - -Eric Benard <[email protected]> - - cpuat91 ARM920T - cpu9260 ARM926EJS (AT91SAM9260 SoC) - cpu9G20 ARM926EJS (AT91SAM9G20 SoC) - -Ajay Bhargav <[email protected]> - - gplugd ARM926EJS (ARMADA100 88AP168 SoC) - -Rishi Bhattacharya <[email protected]> - - omap5912osk ARM926EJS - -Andreas Bie?mann <[email protected]> - - at91rm9200ek at91rm9200 - -Cliff Brake <[email protected]> - - pxa255_idp xscale/pxa - -Rick Bronson <[email protected]> - - AT91RM9200DK at91rm9200 - -Luca Ceresoli <[email protected]> - - dig297 ARM ARMV7 (OMAP3530 SoC) - -Po-Yu Chuang <[email protected]> - - a320evb FA526 (ARM920T-like) (a320 SoC) - -Eric Cooper <[email protected]> - - dockstar ARM926EJS (Kirkwood SoC) - -Wolfgang Denk <[email protected]> - imx27lite i.MX27 - qong i.MX31 - -Mike Dunn <[email protected]> - palmtreo680 pxa270 - -Kristoffer Ericson <[email protected]> - - jornada SA1110 - -Fabio Estevam <[email protected]> - - mx25pdk i.MX25 - mx28evk i.MX28 - mx31pdk i.MX31 - mx53ard i.MX53 - mx53smd i.MX53 - mx6sabresd i.MX6Q/DL - mx6qsabreauto i.MX6Q - wandboard i.MX6DL/S/Q - mx6slevk i.MX6SL - -Daniel Gorsulowski <[email protected]> - - meesc ARM926EJS (AT91SAM9263 SoC) - otc570 ARM926EJS (AT91SAM9263 SoC) - -Bo Shen<[email protected]> - at91sam9g10ek ARM926EJS (AT91SAM9G10 SoC) - at91sam9m10g45ek ARM926EJS (AT91SAM9G45 SoC) - -Simon Guinot <[email protected]> - - inetspace_v2 ARM926EJS (Kirkwood SoC) - netspace_v2 ARM926EJS (Kirkwood SoC) - netspace_max_v2 ARM926EJS (Kirkwood SoC) - net2big_v2 ARM926EJS (Kirkwood SoC) - -Igor Grinberg <[email protected]> - - cm_t35 ARM ARMV7 (OMAP3xx Soc) - -Stefan Herbrechtsmeier <[email protected]> - - dns325 ARM926EJS (Kirkwood SoC) - -Lauri Hintsala <[email protected]> - - apx4devkit i.MX28 - -Vaibhav Hiremath <[email protected]> - - am3517_evm ARM ARMV7 (AM35x SoC) - -Markus Hubig <[email protected]> - - STAMP9G20 ARM926EJS - -Grazvydas Ignotas <[email protected]> - - omap3_pandora ARM ARMV7 (OMAP3xx SoC) - -Ilko Iliev <[email protected]> - - PM9261 AT91SAM9261 - PM9263 AT91SAM9263 - PM9G45 ARM926EJS (AT91SAM9G45 SoC) - -Michael Jones <[email protected]> - - omap3_mvblx ARM ARMV7 (OMAP3xx SoC) - -Matthias Kaehlcke <[email protected]> - edb9301 ARM920T (EP9301) - edb9302 ARM920T (EP9302) - edb9302a ARM920T (EP9302) - edb9307 ARM920T (EP9307) - edb9307a ARM920T (EP9307) - edb9312 ARM920T (EP9312) - edb9315 ARM920T (EP9315) - edb9315a ARM920T (EP9315) - -Nishant Kamat <[email protected]> - - omap1610h2 ARM926EJS - -Minkyu Kang <[email protected]> - - SMDKC100 ARM ARMV7 (S5PC100 SoC) - s5p_goni ARM ARMV7 (S5PC110 SoC) - s5pc210_universal ARM ARMV7 (EXYNOS4210 SoC) - -Chander Kashyap <[email protected]> - - origen ARM ARMV7 (EXYNOS4210 SoC) - SMDKV310 ARM ARMV7 (EXYNOS4210 SoC) - SMDK5250 ARM ARMV7 (EXYNOS5250 SoC) - -Lukasz Majewski <[email protected]> - - trats ARM ARMV7 (EXYNOS4210 SoC) - -Torsten Koschorrek <[email protected]> - scb9328 ARM920T (i.MXL) - -Sergey Kubushyn <[email protected]> - - DV-EVM ARM926EJS - SONATA ARM926EJS - SCHMOOGIE ARM926EJS - -Vipin Kumar <[email protected]> - - spear300 ARM926EJS (spear300 Soc) - spear310 ARM926EJS (spear310 Soc) - spear320 ARM926EJS (spear320 Soc) - spear600 ARM926EJS (spear600 Soc) - -Sergey Lapin <[email protected]> - - afeb9260 ARM926EJS (AT91SAM9260 SoC) - -Valentin Longchamp <[email protected]> - - km_kirkwood ARM926EJS (Kirkwood SoC) - kmnusa ARM926EJS (Kirkwood SoC) - mgcoge3un ARM926EJS (Kirkwood SoC) - kmcoge5un ARM926EJS (Kirkwood SoC) - portl2 ARM926EJS (Kirkwood SoC) - -Nishanth Menon <[email protected]> - - omap3_sdp3430 ARM ARMV7 (OMAP3xx SoC) - omap3_zoom1 ARM ARMV7 (OMAP3xx SoC) - -David M?ller <[email protected]> - - smdk2410 ARM920T - VCMA9 ARM920T - -Eric Millbrandt <[email protected]> - - galaxy5200 mpc5200 - -Nagendra T S <[email protected]> - - am3517_crane ARM ARMV7 (AM35x SoC) - -Dinh Nguyen <[email protected]> -Chin Liang See <[email protected]> - - socfpga socfpga_cyclone5 - -Sandeep Paulraj <[email protected]> - - davinci_dm355evm ARM926EJS - davinci_dm355leopard ARM926EJS - davinci_dm365evm ARM926EJS - davinci_dm6467evm ARM926EJS - -Helmut Raiger <[email protected]> - - tt01 i.MX31 - -Linus Walleij <[email protected]> - integratorap various - integratorcp various - -Luka Perkov <[email protected]> - - ib62x0 ARM926EJS - iconnect ARM926EJS - -Dave Peverley <[email protected]> - - omap730p2 ARM926EJS - -Lars Poeschel <[email protected]> - pcm051 ARM ARMV7 (AM33xx Soc) - -Mathieu Poirier <[email protected]> - - snowball ARM ARMV7 (u8500 SoC) - -Stelian Pop <[email protected]> - - at91sam9260ek ARM926EJS (AT91SAM9260 SoC) - at91sam9261ek ARM926EJS (AT91SAM9261 SoC) - at91sam9263ek ARM926EJS (AT91SAM9263 SoC) - at91sam9rlek ARM926EJS (AT91SAM9RL SoC) - -Matt Porter <[email protected]> - - ti814x_evm ARM ARMV7 (TI814x Soc) - -Dave Purdy <[email protected]> - - pogo_e02 ARM926EJS (Kirkwood SoC) - -Sricharan R <[email protected]> - - omap4_panda ARM ARMV7 (OMAP4xx SoC) - omap4_sdp4430 ARM ARMV7 (OMAP4xx SoC) - omap5_evm ARM ARMV7 (OMAP5xx Soc) - -Suriyan Ramasami <[email protected]> - - goflexhome ARM926EJS (Kirkwood SoC) - -Thierry Reding <[email protected]> - - plutux Tegra20 (ARM7 & A9 Dual Core) - medcom-wide Tegra20 (ARM7 & A9 Dual Core) - tec Tegra20 (ARM7 & A9 Dual Core) - -Christian Riesch <[email protected]> -Manfred Rudigier <[email protected]> - - calimain ARM926EJS (AM1808 SoC) - -Tom Rini <[email protected]> - - am335x_evm ARM ARMV7 (AM33xx Soc) - omap3_beagle ARM ARMV7 (OMAP3xx SoC) - omap3_evm ARM ARMV7 (OMAP3xx SoC) - -Tom Rix <[email protected]> - - omap3_zoom2 ARM ARMV7 (OMAP3xx SoC) - -John Rigby <[email protected]> - - tx25 i.MX25 - -Stefan Roese <[email protected]> - - x600 ARM926EJS (spear600 Soc) - - titanium i.MX6Q - - pdnb3 xscale/ixp - scpu xscale/ixp - -Alessandro Rubini <[email protected]> -Nomadik Linux Team <[email protected]> - - nhk8815 ARM926EJS (Nomadik 8815 Soc) - -Steve Sakoman <[email protected]> - - omap3_overo ARM ARMV7 (OMAP3xx SoC) - -Leo Sartre <[email protected]> - - cgtqmx6qeval i.MX6Q - -Jens Scharsig <[email protected]> - - eb_cpux9k2 ARM920T (AT91RM9200 SoC) - vl_ma2sc ARM926EJS (AT91SAM9263 SoC) - -Heiko Schocher <[email protected]> - - enbw_cmc ARM926EJS (AM1808 SoC) - magnesium i.MX27 - -Michael Schwingen <[email protected]> - - actux1 xscale/ixp - actux2 xscale/ixp - actux3 xscale/ixp - actux4 xscale/ixp - dvlhost xscale/ixp - -Matt Sealey <[email protected]> - - efikamx i.MX51 - efikasb i.MX51 - -Bo Shen <[email protected]> - at91sam9x5ek ARM926EJS (AT91SAM9G15,G25,G35,X25,X35 SoC) - sama5d3xek ARMV7 (SAMA5D31, D33, D34, D35 SoC) - -Rajeshwari Shinde <[email protected]> - - snow ARM ARMV7 (EXYNOS5250 SoC) - -Michal Simek <[email protected]> - - zynq ARM ARMV7 (Zynq SoC) - -Lucas Stach <[email protected]> - - colibri_t20_iris Tegra20 (ARM7 & A9 Dual Core) - -Antoine Tenart <[email protected]> - - TI816X ARM ARMV7 (TI816x Soc) - -Nick Thompson <[email protected]> - - da830evm ARM926EJS (DA830/OMAP-L137) - -Albin Tonnerre <[email protected]> - - sbc35_a9g20 ARM926EJS (AT91SAM9G20 SoC) - tny_a9260 ARM926EJS (AT91SAM9260 SoC) - tny_a9g20 ARM926EJS (AT91SAM9G20 SoC) - -Greg Ungerer <[email protected]> - - cm4008 ks8695p - cm4116 ks8695p - cm4148 ks8695p - -Marek Vasut <[email protected]> - - balloon3 xscale/pxa - colibri_pxa270 xscale/pxa - palmld xscale/pxa - palmtc xscale/pxa - vpac270 xscale/pxa - zipitz2 xscale/pxa - mx23_olinuxino i.MX23 - m28evk i.MX28 - sc_sps_1 i.MX28 - m53evk i.MX53 - -Hugo Villeneuve <[email protected]> - - SFFSDR ARM926EJS - -Lokesh Vutla <[email protected]> - - dra7xx_evm ARM ARMV7 (DRA7xx Soc) - -Matt Waddel <[email protected]> - - vexpress_ca9x4 ARM ARMV7 (Quad Core) - vexpress_ca5x2 ARM ARMV7 (Dual Core) - -Otavio Salvador <[email protected]> - - mx23evk i.MX23 - -Prafulla Wadaskar <[email protected]> - - aspenite ARM926EJS (ARMADA100 88AP168 SoC) - mv88f6281gtw_ge ARM926EJS (Kirkwood SoC) - openrd_base ARM926EJS (Kirkwood SoC) - rd6281a ARM926EJS (Kirkwood SoC) - sheevaplug ARM926EJS (Kirkwood SoC) - -Michael Walle <[email protected]> - - lschlv2 ARM926EJS (Kirkwood SoC) - lsxhl ARM926EJS (Kirkwood SoC) - -Tom Warren <[email protected]> - - harmony Tegra20 (ARM7 & A9 Dual Core) - seaboard Tegra20 (ARM7 & A9 Dual Core) - cardhu Tegra30 (ARM7 & A9 Quad Core) - dalmore Tegra114 (ARM7 & A15 Quad Core) - -Tom Warren <[email protected]> -Stephen Warren <[email protected]> - - ventana Tegra20 (ARM7 & A9 Dual Core) - paz00 Tegra20 (ARM7 & A9 Dual Core) - trimslice Tegra20 (ARM7 & A9 Dual Core) - whistler Tegra20 (ARM7 & A9 Dual Core) - beaver Tegra30 (ARM7 & A9 Quad Core) - -Stephen Warren <[email protected]> - - rpi_b BCM2835 (ARM1176) - -Thomas Weber <[email protected]> - - devkit8000 ARM ARMV7 (OMAP3530 SoC) - tricorder ARM ARMV7 (OMAP3503 SoC) - -Lei Wen <[email protected]> - - dkb ARM926EJS (PANTHEON 88AP920 SOC) - -Matthias Weisser <[email protected]> - - jadecpu ARM926EJS (MB86R01 SoC) - zmx25 ARM926EJS (imx25 SoC) - -Josh Wu <[email protected]> - at91sam9n12ek ARM926EJS (AT91SAM9N12 SoC) - -Ilya Yanok <[email protected]> - - mcx ARM ARMV7 (AM35x SoC) - -Syed Mohammed Khasim <[email protected]> -Sughosh Ganu <[email protected]> - - hawkboard ARM926EJS (OMAP-L138) - -Vladimir Zapolskiy <[email protected]> - - devkit3250 lpc32xx - -Nobuhiro Iwamatsu <[email protected]> -Tetsuyuki Kobayashi <[email protected]> - - kzm9g SH73A0 (RMOBILE SoC) - -Nobuhiro Iwamatsu <[email protected]> - - armadillo-800eva R8A7740 (RMOBILE SoC) - -Pali Roh?r <[email protected]> - - nokia_rx51 ARM ARMV7 (OMAP34xx SoC) - -Eric Nelson <[email protected]> - mx6qsabrelite i.MX6Q 1GB - nitrogen6dl i.MX6DL 1GB - nitrogen6dl2g i.MX6DL 2GB - nitrogen6q i.MX6Q/6D 1GB - nitrogen6q2g i.MX6Q/6D 2GB - nitrogen6s i.MX6S 512MB - nitrogen6s1g i.MX6S 1GB - -Alison Wang <[email protected]> - - vf610twr VF610 - -Sergey Yanovich <[email protected]> - - lp8x4x xscale/pxa - -Roger Meier <[email protected]> - dxr2 ARM ARMV7 (AM335x SoC) - pxm2 ARM ARMV7 (AM335x SoC) - rut ARM ARMV7 (AM335x SoC) - -------------------------------------------------------------------------- - -Unknown / orphaned boards: - Board CPU Last known maintainer / Comment -......................................................................... - - omap1510inn ARM925T Kshitij Gupta <[email protected]> - - lubbock xscale/pxa Kyle Harris <[email protected]> / dead address - - imx31_phycore_eet i.MX31 Guennadi Liakhovetski <[email protected]> / resigned - mx31ads i.MX31 Guennadi Liakhovetski <[email protected]> / resigned - -######################################################################### -# x86 Systems: # -# # -# Maintainer Name, Email Address # -# Board CPU # -######################################################################### - -Simon Glass <[email protected]> - - chromebook-x86 Coreboot runs first, then U-Boot - Supports Intel Sandy Bridge / Ivy Bridge so far - - Chromebooks for x86, including: - Samsung Series 5 Chromebook - Acer AC700 Chromebook - Acer C7 Chromebook - Samsung Chromebook 550 - HP Pavillion Chromebook - Acer C710 Chromebook - Chromebook Pixel - -######################################################################### -# MIPS Systems: # -# # -# Maintainer Name, Email Address # -# Board CPU # -######################################################################### - -Wolfgang Denk <[email protected]> - - incaip MIPS32 4Kc - -Vlad Lungu <[email protected]> - qemu_mips MIPS32 - -Stefan Roese <[email protected]> - - vct_xxx MIPS32 4Kc - -------------------------------------------------------------------------- - -Unknown / orphaned boards: - Board CPU Last known maintainer / Comment -......................................................................... - - dbau1x00 MIPS32 Au1000 Thomas Lange <[email protected]> - -######################################################################### -# Nios-II Systems: # -# # -# Maintainer Name, Email Address # -# Board CPU # -######################################################################### - -Scott McNutt <[email protected]> - - PCI5441 Nios-II - PK1C20 Nios-II - nios2-generic Nios-II - -######################################################################### -# MicroBlaze Systems: # -# # -# Maintainer Name, Email Address # -# Board CPU # -######################################################################### - -Michal Simek <[email protected]> - - microblaze-generic MicroBlaze - -######################################################################### -# Coldfire Systems: # -# # -# Maintainer Name, Email Address # -# Board CPU # -######################################################################### - -Hayden Fraser <[email protected]> - - M5253EVBE mcf52x2 - -Matthias Fuchs <[email protected]> - - TASREG MCF5249 - -Jens Scharsig <[email protected]> - - eb_cpu5282 mfc5282 - -TsiChung Liew <[email protected]> - - M52277EVB mcf5227x - M5235EVB mcf52x2 - M5253DEMO mcf52x2 - M53017EVB mcf532x - M5329EVB mcf532x - M5373EVB mcf532x - M54455EVB mcf5445x - M5475EVB mcf547x_8x - M5485EVB mcf547x_8x - -Wolfgang Wegner <[email protected]> - - astro_mcf5373l MCF5373L - -######################################################################### -# AVR32 Systems: # -# # -# Maintainer Name, Email Address # -# Board CPU # -######################################################################### - -Andreas Bie?mann <[email protected]> - grasshopper AT32AP7000 - atngw100mkii AT32AP7000 - -Hans-Christian Egtvedt <[email protected]> - - FAVR-32-EZKIT AT32AP7000 - -Mark Jackson <[email protected]> - - MIMC200 AT32AP7000 - -Alex Raimondi <[email protected]> -Julien May <[email protected]> - - HAMMERHEAD AT32AP7000 - -Haavard Skinnemoen <[email protected]> - - ATSTK1000 AT32AP7xxx - ATSTK1002 AT32AP7000 - ATSTK1003 AT32AP7001 - ATSTK1004 AT32AP7002 - ATSTK1006 AT32AP7000 - ATNGW100 AT32AP7000 - -######################################################################### -# SuperH Systems: # -# # -# Maintainer Name, Email Address # -# Board CPU # -######################################################################### - -Yusuke Goda <[email protected]> - - MIGO-R SH7722 - -Nobuhiro Iwamatsu <[email protected]> - <[email protected]> - - MS7750SE SH7750 - MS7722SE SH7722 - R7780MP SH7780 - R2DPlus SH7751R - SH7763RDP SH7763 - RSK7203 SH7203 - AP325RXA SH7723 - SHMIN SH7706 - ECOVEC SH7724 - R0P7734 SH7734 - AP_SH4A_4A SH7734 - -Mark Jonas <[email protected]> - - mpr2 SH7720 - -Yoshihiro Shimoda <[email protected]> - - MS7720SE SH7720 - R0P77520000RZ SH7752 - R0P77570030RL SH7757 - R0P77850011RL SH7785 - -######################################################################### -# Blackfin Systems: # -# # -# Maintainer Name, Email Address # -# Board CPU # -######################################################################### - -Sonic Zhang <[email protected]> -Blackfin Team <[email protected]> - - BF506F-EZKIT BF506 - BF518F-EZBRD BF518 - BF526-EZBRD BF526 - BF527-AD7160-EVAL BF527 - BF527-EZKIT BF527 - BF527-EZKIT-V2 BF527 - BF527-SDP BF527 - BF533-EZKIT BF533 - BF533-STAMP BF533 - BF537-PNAV BF537 - BF537-STAMP BF537 - BF538F-EZKIT BF538 - BF548-EZKIT BF548 - BF561-EZKIT BF561 - BF609-EZKIT BF609 - -M.Hasewinkel (MHA) <[email protected]> - - dnp5370 BF537 - -Brent Kandetzki <[email protected]> - - IP04 BF532 - -Peter Meerwald <[email protected]> - - bct-brettl2 BF536 - -I-SYST Micromodule <[email protected]> - - IBF-DSP561 BF561 - -Wojtek Skulski <[email protected]> -Wojtek Skulski <[email protected]> -Benjamin Matthews <[email protected]> - - BlackStamp BF533 - BlackVME BF561 - -Martin Strubel <[email protected]> - - BF537-minotaur BF537 - BF537-srv1 BF537 - -Bluetechnix Tinyboards <[email protected]> - - CM-BF527 BF527 - CM-BF533 BF533 - CM-BF537E BF537 - CM-BF537U BF537 - CM-BF548 BF548 - CM-BF561 BF561 - TCM-BF518 BF518 - TCM-BF537 BF537 - -Valentin Yakovenkov <[email protected]> -Anton Shurpin <[email protected]> - - BF561-ACVILON BF561 - -Haitao Zhang <[email protected]> -Chong Huang <[email protected]> - - bf525-ucr2 BF525 - -Dimitar Penev <[email protected]> - - BR4 Appliance BF537 - PR1 Appliance BF537 - -######################################################################### -# NDS32 Systems: # -# # -# Maintainer Name, Email Address # -# Board CPU # -######################################################################### - -Andes <[email protected]> - - ADP-AG101 N1213 (AG101 SoC) - ADP-AG101P N1213 (AG101P XC5 FPGA) - ADP-AG102 N1213f (AG102 SoC with FPU) - -######################################################################### -# OpenRISC Systems: # -# # -# Maintainer Name, Email Address # -# Board CPU # -######################################################################### - -Stefan Kristiansson <[email protected]> - - openrisc-generic OpenRISC - -######################################################################### -# Sandbox: # -# # -# Maintainer Name, Email Address # -# Board CPU # -######################################################################### - -Simon Glass <[email protected]> - - sandbox sandbox - -######################################################################### -# End of MAINTAINERS list # -#########################################################################
MAKEALL +24 -27
108 lines not on this page · raw message
Makefile +1 -1
@@ -837,7 +837,7 @@ unconfig: sinclude $(obj).boards.depend $(obj).boards.depend: boards.cfg - @awk '(NF && $$1 !~ /^#/) { print $$1 ": " $$1 "_config; $$(MAKE)" }' $< > $@ + @awk '(NF && $$1 !~ /^#/) { print $$7 ": " $$7 "_config; $$(MAKE) -d" }' $< > $@ # # Functions to generate common board directory names
README +3 -3
@@ -35,7 +35,7 @@ Makefile have been tested to some extent and can be considered "working". In fact, many of them are used in production systems. In case of problems see the CHANGELOG and CREDITS files to find out -who contributed the specific port. The MAINTAINERS file lists board +who contributed the specific port. The boards.cfg file lists board maintainers. Note: There is no CHANGELOG file in the actual U-Boot source tree;
@@ -5824,8 +5824,8 @@ it: * For major contributions, your entry to the CREDITS file -* When you add support for a new board, don't forget to add this - board to the MAINTAINERS file, too. +* When you add support for a new board, don't forget to add a + maintainer e-mail address to the boards.cfg file, too. * If your patch adds new configuration options, don't forget to document these in the README file.
boards.cfg +1173 -1172
1,454 lines not on this page · raw message
tools/reformat.py new file +132 -0
132 lines not on this page · raw message
The rest of this diff is not shown. View the raw message.
Signature · 1 line
1.8.1.2
Part of the diff is not shown here. View the raw message.
PATCH v2 1/1 Merge and reformat boards.cfg and MAINTAINERS
Quoted 14 lines · Albert ARIBAUD
Put all informations about targets, including state (active or orphan) and maintainers, in boards.cfg; remove
MAINTAINERS; adjust the build system accordingly.Signed-off-by Albert ARIBAUD <[email protected]>---
V2:
- updated with latest boards.cfg/MAINTAINER info
- fixed wrong maintainer(s) for orphan boards
- fixed wrong maintainer(s) for base:options case
- fixed lingering misuses of boards.cfg andMAINTAINERS
V1:
- initial submission from squashed RFC patch series
Quoted 11 lines
MAINTAINERS | 1412 ---------------------------- MAKEALL | 51 +- Makefile | 2 +- README | 6 +- boards.cfg | 2345 ++++++++++++++++++++++++----------------------- mkconfig | 31 +- tools/buildman/board.py | 2 +- tools/reformat.py | 132 +++ 8 files changed, 1350 insertions(+), 2631 deletions(-) delete mode 100644 MAINTAINERS create mode 100755 tools/reformat.py
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130912/76d707cd/attachment.pgp>
PATCH v2 1/1 Merge and reformat boards.cfg and MAINTAINERS
Hello Albert, Tom.
Commit 27af930e9 added Active/Orphan status in the first column of boards.cfg.
Could you tell the definition of "Active" and "Orphan".
At first I imagined Orphan means a board without maintainer. But the maintainer information is missing from lots of Active boards. So I could not find the difference between Active and Orphan.
Best Regards
Masahiro Yamada
PATCH v2 1/1 Merge and reformat boards.cfg and MAINTAINERS
Hi Masahiro,
Quoted 11 lines · Masahiro Yamada
Hello Albert, Tom.
Commit
27af930e9added Active/Orphan status in the first column of boards.cfg.Could you tell the definition of "Active" and "Orphan".
At first I imagined Orphan means a board without maintainer. But the maintainer information is missing from lots of Active boards. So I could not find the difference between Active and Orphan.
I have listed as "Orphan" any board mentioned in the "unknown / orphan" sections of the original MAINTAINERS file.
If you look at the original MAINTAINERS, you'll see that some boards were listed under a maintainer e-mail, and some boards were listed under "unknown / orphan"; but not all boards were listed.
I set the board state in the new board.cfg to "Orphan" if and only if the board was listed in such an "unknown / orphan" section, and to "Active in any other case". This implies that:
- some boards were present in the old boards.cfg but not listed in MAINTAINERS (e.g. sh7785lcr), which means there are "Active" boards which do not have a maintainer;
- some "unknown / orphan" boards had a "last known maintainer address" specified (e.g. EVB64260_750CX), which means there are "Orphan" boards which have a maintainer listed.
IOW, a board's state (Active or Orphan) has no formal relationship with this board having maintainers or not; the state only determines whether this board should be built (Active) or not (Orphan).
Note that I have verified that ./MAKEALL -a arm built the same boards, although I have not verified this for other architectures; and that ./MAKEALL -m listed the same boards and maintainers (or more exactly, listed the same boards and attributed the correct maintainers, as some of the old ./MAKEALL -m output was incorrect), at meast for ARM and PowerPC.
Quoted 2 lines
Best Regards
Masahiro Yamada
Amicalement,
Signature · 1 line
Albert.
PATCH v2 1/1 Merge and reformat boards.cfg and MAINTAINERS
Hello Albert
Quoted 11 lines
I set the board state in the new board.cfg to "Orphan" if and only if the board was listed in such an "unknown / orphan" section, and to "Active in any other case". This implies that:
- some boards were present in the old boards.cfg but not listed in
MAINTAINERS(e.g. sh7785lcr), which means there are "Active" boards which do not have a maintainer;- some "unknown / orphan" boards had a "last known maintainer address" specified (e.g.
EVB64260_750CX), which means there are "Orphan" boards which have a maintainer listed.
To sum up things, boards have actually 3 states:
(1) Active:
had a maintainer in the original MAINTAINERS file
(2) Orphan:
listed under unknown/orphan in the original MAINTAINERS file
(3) maybe Active, maybe Orphan:
not mentioned in the original MAINTAINERS file
You pushed both (1) and (3) into Active state in the new boards.cfg although many boards in (3) might not have a maintainer.
In such a case, what is the meaning to categorize into Active or Orphan?
Quoted 3 lines
IOW, a board's state (Active or Orphan) has no formal relationship with this board having maintainers or not; the state only determines whether this board should be built (Active) or not (Orphan).
I think unknown/orphan stands for "no maintainers" in the original MAINTAINERS file. Now you recongnize this as "Should not be built".
Is this the same meaning?
In my opinion, 'Orphan' might be a misleading term for the latter. Active / Dead ?
How abount reconsidering a bit more about this categorization?
Best Regards
Masahiro Yamada
PATCH v2 1/1 Merge and reformat boards.cfg and MAINTAINERS
Hi Masahiro,
Quoted 30 lines · Masahiro Yamada
Hello Albert
Quoted 11 lines
I set the board state in the new board.cfg to "Orphan" if and only if the board was listed in such an "unknown / orphan" section, and to "Active in any other case". This implies that:
- some boards were present in the old boards.cfg but not listed in
MAINTAINERS(e.g. sh7785lcr), which means there are "Active" boards which do not have a maintainer;- some "unknown / orphan" boards had a "last known maintainer address" specified (e.g.
EVB64260_750CX), which means there are "Orphan" boards which have a maintainer listed.To sum up things, boards have actually 3 states:
(1) Active:
had a maintainer in the originalMAINTAINERSfile(2) Orphan:
listed under unknown/orphan in the originalMAINTAINERSfile(3) maybe Active, maybe Orphan:
not mentioned in the originalMAINTAINERSfileYou pushed both (1) and (3) into Active state in the new boards.cfg although many boards in (3) might not have a maintainer.
In such a case, what is the meaning to categorize into Active or Orphan?
Quoted 7 lines
Quoted 3 lines
IOW, a board's state (Active or Orphan) has no formal relationship with this board having maintainers or not; the state only determines whether this board should be built (Active) or not (Orphan).
I think unknown/orphan stands for "no maintainers" in the original
MAINTAINERSfile. Now you recongnize this as "Should not be built".
Is this the same meaning?
As far as I can tell, it is the same meaning -- by that I mean I compared the build counts before and after the change and found no difference.
Note that if a board was found orphan, it means that there was an attempt to contact the maintainer and it failed. And if there was an attempt to contact the maintainer, chances are it was because the board had issues.
Quoted 5 lines
In my opinion, 'Orphan' might be a misleading term for the latter. Active / Dead ?
How abount reconsidering a bit more about this categorization?
If you feel that there should be a renaming, feel free to submit patches. The only risk I see is that the name "Active" is used by the makefiles to find out which boards it should build, so if you change that in boards.cfg, you'll have to change it in the makefile(s) too.
Quoted 2 lines
Best Regards
Masahiro Yamada
Amicalement,
Signature · 1 line
Albert.
A message that is not in the archive (sent off-list or not yet received): 7B43E01F5906F9448BF8BAACD5D26B3803CA11@DENBGAT9EH2MSX.ww902.siemens.net
PATCH v2 1/1 Merge and reformat boards.cfg and MAINTAINERS
Hi Roger,
Quoted 68 lines · Roger
Hi Albert
Quoted 21 lines
-----Original Message-----
From: u-boot-bounces at lists.denx.de [mailto:u-boot-bounces at lists.denx.de] On Behalf Of Albert ARIBAUD
Sent: Mittwoch, 11. September 2013 15:53
To: u-boot at lists.denx.de
Subject: [U-Boot] [PATCH v2] Merge and reformat boards.cfg andMAINTAINERSPut all informations about targets, including state (active or orphan) and maintainers, in boards.cfg; remove
MAINTAINERS; adjust the build system accordingly.Signed-off-by Albert ARIBAUD <[email protected]>---
V2:
- updated with latest boards.cfg/MAINTAINER info
- fixed wrong maintainer(s) for orphan boards
- fixed wrong maintainer(s) for base:options case
- fixed lingering misuses of boards.cfg andMAINTAINERS
V1:
- initial submission from squashed RFC patch seriesQuoted 13 lines
MAINTAINERS | 1412 ---------------------------- MAKEALL | 51 +- Makefile | 2 +- README | 6 +- boards.cfg | 2345 ++++++++++++++++++++++++---------------------- - mkconfig | 31 +- tools/buildman/board.py | 2 +- tools/reformat.py | 132 +++ 8 files changed, 1350 insertions(+), 2631 deletions(-) delete mode 100644 MAINTAINERS create mode 100755 tools/reformat.pyI really like that simplification!
tools/checkpatch.pldetected these errors:
---SNIP---
ERROR: trailing whitespace
#4055: FILE:tools/reformat.py:32:
+# ^I$ERROR: trailing whitespace
#4125: FILE:tools/reformat.py:102:
+^I^I# any missing field is set to default if it exists $ ---SNIP---and I recognized that
tools/checkpatch.plneeds the patch below.Regards,
Rogertools/checkpatch.pl +1
-1@@ -398,7 +398,7 @@ sub top_of_kernel_tree { my ($root) = @_; my @tree_check = ( - "COPYING", "CREDITS", "Kbuild", "MAINTAINERS", "Makefile", + "COPYING", "CREDITS", "Kbuild", "Makefile", "README", "Documentation", "arch", "include", "drivers", "fs", "init", "ipc", "kernel", "lib", "scripts", );
tools/checkpatch.pl sub process { · line 3706
Quoted 7 lines
tools/checkpatch.pl +1
-1@@ -3701,7 +3701,7 @@ sub process { $vname has style problems, please review. If any of these errors are false positives, please report -them to the maintainer, see CHECKPATCH in MAINTAINERS. +them to the maintainer, see boards.cfg. EOM }
Thanks! I thought I'd done a grep -i MAINTAINERS before posting, obviously I hadn't.
Could you send thoses two fixes as as a proper, standalone git patch rather than a reply to another patch, so that they can be properly attributed to you?
Amicalement,
Signature · 1 line
Albert.
Meier
PATCH v2 1/1 Merge and reformat boards.cfg and MAINTAINERS
Hi Albert
Quoted 3 lines
Could you send thoses two fixes as as a proper, standalone git patch rather than a reply to another patch, so that they can be properly attributed to you?
I received this message from mailing list robot:
"Message rejected. No base64 encoded MIME text parts allowed." ... I will try the setup another mail client soon.
So I did a resend here: http://patchwork.ozlabs.org/patch/274695/
Regards
Roger