cpufreq and QEMU guests
Hello,
I know a cloud provider worried about the fact that the /proc/cpuinfo of his guests give a bogus frequency to his customer.
QEMU and the guests kernel currently have no way to reflect the host frequency changes to the guests.
The customer compute intensive application then read this information and take wrong decisions.
I looked at the various Linux cpufreq drivers and they all seems to be table based. Is it true ?
For example the acpi cpufreq driver have 16 differents pstates at hand to lookup in the pstate table and get the frequency.
Given that guests can migrate from one hardware to a slightly different hardware the table may become wrong after live migration.
What would be the best hardware to emulate in order to pass an arbitrary frequency to the guest ?
Would a pvfreq paravirtualized QEMU hardware and a guest driver implementing only the callbacks needed to read the frequency be a good idea ?
Best regards
Benoît
ps:
I CC this mail to the other QEMU arch maintainers because the problem must be the same everywhere where KVM run.
Am 16.09.2013 um 07:15 schrieb Benoît Canet <[email protected]>:
Quoted 11 lines
Hello,
I know a cloud provider worried about the fact that the
/proc/cpuinfoof his guests give a bogus frequency to his customer.QEMU and the guests kernel currently have no way to reflect the host frequency changes to the guests.
The customer compute intensive application then read this information and take wrong decisions.
Why do they care about the frequency? Is it for scheduling workloads? The only other case I can think of would be the TSC and that should be fixed frequency these days.
If it's scheduling, you could maybe expose the unavailable compute time as steal time to the guest. Exposibg frequency in a virtual environment feels backwards.
Alex
Quoted 23 lines
I looked at the various Linux cpufreq drivers and they all seems to be table based. Is it true ?
For example the acpi cpufreq driver have 16 differents pstates at hand to lookup in the pstate table and get the frequency.
Given that guests can migrate from one hardware to a slightly different hardware the table may become wrong after live migration.
What would be the best hardware to emulate in order to pass an arbitrary frequency to the guest ?
Would a pvfreq paravirtualized QEMU hardware and a guest driver implementing only the callbacks needed to read the frequency be a good idea ?
Best regards
Benoît
ps:
I CC this mail to the other QEMU arch maintainers because the problem must be the same everywhere where KVM run.
Quoted 13 lines · Alexander Graf
Am 16.09.2013 um 07:15 schrieb Benoît Canet <[email protected]>:
Quoted 9 lines
Hello,
I know a cloud provider worried about the fact that the
/proc/cpuinfoof his guests give a bogus frequency to his customer.QEMU and the guests kernel currently have no way to reflect the host frequency changes to the guests.
Quoted 6 lines
Quoted 2 lines
The customer compute intensive application then read this information and take wrong decisions.
Why do they care about the frequency? Is it for scheduling workloads? The only other case I can think of would be the TSC and that should be fixed frequency these days.
If it's scheduling, you could maybe expose the unavailable compute time as steal time to the guest. Exposibg frequency in a virtual environment feels backwards.
The final customer have a compute intensive workload.
At startup the code retrieve the cpu cache topology, the cpu model, and various informations including the guest cpu frequency before starting the compute job. The QEMU instance typicaly use -cpu host.
The code inspects the cpu frequency has seen by the guests to choose the number of vms to instanciate to compute the given task.
They even destroy and recreate some vms that would be underperforming to mitigate the high inter vm communication costs.
Do you think the steal time trick would work for this ?
Best regards
Benoît
Quoted 30 lines
Alex
Quoted 16 lines
I looked at the various Linux cpufreq drivers and they all seems to be table based. Is it true ?
For example the acpi cpufreq driver have 16 differents pstates at hand to lookup in the pstate table and get the frequency.
Given that guests can migrate from one hardware to a slightly different hardware the table may become wrong after live migration.
What would be the best hardware to emulate in order to pass an arbitrary frequency to the guest ?
Would a pvfreq paravirtualized QEMU hardware and a guest driver implementing only the callbacks needed to read the frequency be a good idea ?
Quoted 7 lines
Best regards
Benoît
ps:
I CC this mail to the other QEMU arch maintainers because the problem must be the same everywhere where KVM run.--
To unsubscribe from this list: send the line "unsubscribe cpufreq" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 21 lines · Benoît Canet
Quoted 13 lines · Alexander Graf
Am 16.09.2013 um 07:15 schrieb Benoît Canet <[email protected]>:
Quoted 9 lines
Hello,
I know a cloud provider worried about the fact that the
/proc/cpuinfoof his guests give a bogus frequency to his customer.QEMU and the guests kernel currently have no way to reflect the host frequency changes to the guests.
Quoted 6 lines
Quoted 2 lines
The customer compute intensive application then read this information and take wrong decisions.
Why do they care about the frequency? Is it for scheduling workloads? The only other case I can think of would be the TSC and that should be fixed frequency these days.
If it's scheduling, you could maybe expose the unavailable compute time as steal time to the guest. Exposibg frequency in a virtual environment feels backwards.
Quoted 7 lines
The final customer have a compute intensive workload.
At startup the code retrieve the cpu cache topology, the cpu model, and various informations including the guest cpu frequency before starting the compute job. The QEMU instance typicaly use -cpu host.The code inspects the cpu frequency has seen by the guests to choose the number of vms to instanciate to compute the given task.
I am not sure I understand. They look at guest cpu frequency to estimate guest's performance?
Quoted 5 lines
They even destroy and recreate some vms that would be underperforming to mitigate the high inter vm communication costs.
Do you think the steal time trick would work for this ?
--
Gleb.
Quoted 27 lines · Gleb Natapov
Quoted 26 lines · Benoît Canet
Quoted 13 lines · Alexander Graf
Am 16.09.2013 um 07:15 schrieb Benoît Canet <[email protected]>:
Quoted 9 lines
Hello,
I know a cloud provider worried about the fact that the
/proc/cpuinfoof his guests give a bogus frequency to his customer.QEMU and the guests kernel currently have no way to reflect the host frequency changes to the guests.
Quoted 6 lines
Quoted 2 lines
The customer compute intensive application then read this information and take wrong decisions.
Why do they care about the frequency? Is it for scheduling workloads? The only other case I can think of would be the TSC and that should be fixed frequency these days.
If it's scheduling, you could maybe expose the unavailable compute time as steal time to the guest. Exposibg frequency in a virtual environment feels backwards.
The final customer have a compute intensive workload.
At startup the code retrieve the cpu cache topology, the cpu model, and various informations including the guest cpu frequency before starting the compute job. The QEMU instance typicaly use -cpu host.
Quoted 4 lines
Quoted 2 lines
The code inspects the cpu frequency has seen by the guests to choose the number of vms to instanciate to compute the given task.
I am not sure I understand. They look at guest cpu frequency to estimate guest's performance?
Yes they take guest cpu count, model and frequency to estimate the performance of the guest.
Next they cluster enough guests to be able to compute the job in a given time by using this estimate.
Best regards
Benoît
Quoted 13 lines
Quoted 6 lines
They even destroy and recreate some vms that would be underperforming to mitigate the high inter vm communication costs.
Do you think the steal time trick would work for this ?
--
Gleb.
--
To unsubscribe from this list: send the line "unsubscribe cpufreq" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 30 lines · Benoît Canet
Quoted 29 lines · Gleb Natapov
Quoted 28 lines · Benoît Canet
Quoted 13 lines · Alexander Graf
Am 16.09.2013 um 07:15 schrieb Benoît Canet <[email protected]>:
Quoted 9 lines
Hello,
I know a cloud provider worried about the fact that the
/proc/cpuinfoof his guests give a bogus frequency to his customer.QEMU and the guests kernel currently have no way to reflect the host frequency changes to the guests.
Quoted 6 lines
Quoted 2 lines
The customer compute intensive application then read this information and take wrong decisions.
Why do they care about the frequency? Is it for scheduling workloads? The only other case I can think of would be the TSC and that should be fixed frequency these days.
If it's scheduling, you could maybe expose the unavailable compute time as steal time to the guest. Exposibg frequency in a virtual environment feels backwards.
The final customer have a compute intensive workload.
At startup the code retrieve the cpu cache topology, the cpu model, and various informations including the guest cpu frequency before starting the compute job. The QEMU instance typicaly use -cpu host.The code inspects the cpu frequency has seen by the guests to choose the number of vms to instanciate to compute the given task.
Quoted 8 lines
Quoted 2 lines
I am not sure I understand. They look at guest cpu frequency to estimate guest's performance?
Yes they take guest cpu count, model and frequency to estimate the performance of the guest.
Next they cluster enough guests to be able to compute the job in a given time by using this estimate.
They do it wrong. They should take guest cpu count, host cpu model and frequency, pcpu/vcpu over commit (if any), guest/host memory overcommit (if any) and estimate performance based on this. For pure computational performance guest core performance should be close to host core performance if there is not cpu/memory overcommit. With a lot of IO things become more complicated.
--
Gleb.
Quoted 39 lines · Gleb Natapov
Quoted 30 lines · Benoît Canet
Quoted 29 lines · Gleb Natapov
Quoted 28 lines · Benoît Canet
Quoted 13 lines · Alexander Graf
Am 16.09.2013 um 07:15 schrieb Benoît Canet <[email protected]>:
Quoted 9 lines
Hello,
I know a cloud provider worried about the fact that the
/proc/cpuinfoof his guests give a bogus frequency to his customer.QEMU and the guests kernel currently have no way to reflect the host frequency changes to the guests.
Quoted 6 lines
Quoted 2 lines
The customer compute intensive application then read this information and take wrong decisions.
Why do they care about the frequency? Is it for scheduling workloads? The only other case I can think of would be the TSC and that should be fixed frequency these days.
If it's scheduling, you could maybe expose the unavailable compute time as steal time to the guest. Exposibg frequency in a virtual environment feels backwards.
The final customer have a compute intensive workload.
At startup the code retrieve the cpu cache topology, the cpu model, and various informations including the guest cpu frequency before starting the compute job. The QEMU instance typicaly use -cpu host.The code inspects the cpu frequency has seen by the guests to choose the number of vms to instanciate to compute the given task.
Quoted 8 lines
Quoted 2 lines
I am not sure I understand. They look at guest cpu frequency to estimate guest's performance?
Yes they take guest cpu count, model and frequency to estimate the performance of the guest.
Next they cluster enough guests to be able to compute the job in a given time by using this estimate.
Quoted 6 lines
They do it wrong. They should take guest cpu count, host cpu model and frequency, pcpu/vcpu over commit (if any), guest/host memory overcommit (if any) and estimate performance based on this. For pure computational performance guest core performance should be close to host core performance if there is not cpu/memory overcommit. With a lot of IO things become more complicated.
I ommited to write some details of the use case.
The cloud is a Amazon compatible one this means there is no guest agent in the guest to help retrieve the host frequency and model.
Also the AWS APIs don't provide a way to communicate the host CPU infos to the program responsible of the vm orchestrations.
So the only interface to access the host cpu info is QEMU and it's started with -cpu host to passthrough the cpu model to the guest.
What hurt the final customer badly is that the guest /proc/cpuinfo see the regular max frequency of the host cpu but won't see the turbo frequency or a scaled down one.
Best regards
Benoît
Quoted 4 lines
--
Gleb.
Quoted 49 lines · Benoît Canet
Quoted 39 lines · Gleb Natapov
Quoted 30 lines · Benoît Canet
Quoted 29 lines · Gleb Natapov
Quoted 28 lines · Benoît Canet
Quoted 13 lines · Alexander Graf
Am 16.09.2013 um 07:15 schrieb Benoît Canet <[email protected]>:
Quoted 9 lines
Hello,
I know a cloud provider worried about the fact that the
/proc/cpuinfoof his guests give a bogus frequency to his customer.QEMU and the guests kernel currently have no way to reflect the host frequency changes to the guests.
Quoted 6 lines
Quoted 2 lines
The customer compute intensive application then read this information and take wrong decisions.
Why do they care about the frequency? Is it for scheduling workloads? The only other case I can think of would be the TSC and that should be fixed frequency these days.
If it's scheduling, you could maybe expose the unavailable compute time as steal time to the guest. Exposibg frequency in a virtual environment feels backwards.
The final customer have a compute intensive workload.
At startup the code retrieve the cpu cache topology, the cpu model, and various informations including the guest cpu frequency before starting the compute job. The QEMU instance typicaly use -cpu host.The code inspects the cpu frequency has seen by the guests to choose the number of vms to instanciate to compute the given task.
Quoted 8 lines
Quoted 2 lines
I am not sure I understand. They look at guest cpu frequency to estimate guest's performance?
Yes they take guest cpu count, model and frequency to estimate the performance of the guest.
Next they cluster enough guests to be able to compute the job in a given time by using this estimate.Quoted 6 lines
They do it wrong. They should take guest cpu count, host cpu model and frequency, pcpu/vcpu over commit (if any), guest/host memory overcommit (if any) and estimate performance based on this. For pure computational performance guest core performance should be close to host core performance if there is not cpu/memory overcommit. With a lot of IO things become more complicated.
I ommited to write some details of the use case.
Quoted 9 lines
The cloud is a Amazon compatible one this means there is no guest agent in the guest to help retrieve the host frequency and model.
Also the AWS APIs don't provide a way to communicate the host CPU infos to the program responsible of the vm orchestrations.
So the only interface to access the host cpu info is QEMU and it's started with -cpu host to passthrough the cpu model to the guest.
Why are they sure they are started with "-cpu host"? Do they know if host is overcommitted or guest's vcpu usage is restricted by any other means?
Quoted 4 lines
What hurt the final customer badly is that the guest
/proc/cpuinfosee the regular max frequency of the host cpu but won't see the turbo frequency or a scaled down one.
What he sees is host tsc frequency of the cpu a guest was booted on
[1] which should be adequate to estimate performance if guest is not migrated. The frequency host cpu is running on at any given moment is out of guest control and depend on host frequency governor and load.
[1] the value comes from host, for not constant tsc hosts this is max possible frequency
--
Gleb.