doc: README.mxs: Add instruction to install 'libssl-dev'
Fabio Estevam
reviewerPATCH v2 1/1 doc: README.mxs: Add instruction to install 'libssl-dev'
From: Fabio Estevam <[email protected]>
Since commit bce883707 (ARM: mxs: tools: Add mkimage support for MXS bootstream) the following build error is seen when doing a MAKEALL build:
$ ./MAKEALL mx28evk Configuring for mx28evk - Board: mx28evk, Options: ENV_IS_IN_MMC mxsimage.c:18:25: fatal error: openssl/evp.h: No such file or directory
Add an entry about the need of installing the 'libssl-dev' package.
---
Changes since v1:
- Do not remove the 'elftosb' text.
doc/README.mxs | 5 +++++ 1 file changed, 5 insertions(+)
doc/README.mxs +5 -0
@@ -63,6 +63,11 @@ copy the binary by hand: Make sure the "elftosb" binary can be found in your $PATH, in this case this means "/usr/local/bin/" has to be in your $PATH. +Install the 'libssl-dev' package as well. On a Ubuntu-based distribution, this +package can be installed as follows: + + $ sudo apt-get install libssl-dev + 2) Compiling U-Boot for a MXS based board -------------------------------------------
Signature · 1 line
1.8.1.2
PATCH v2 1/1 doc: README.mxs: Add instruction to install 'libssl-dev'
Dear Fabio Estevam,
Quoted 29 lines
From: Fabio Estevam <[email protected]>
Since commit
bce883707(ARM: mxs: tools: Add mkimage support for MXS bootstream) the following build error is seen when doing a MAKEALL build:$ ./MAKEALL mx28evk Configuring for mx28evk - Board: mx28evk, Options: ENV_IS_IN_MMC mxsimage.c:18:25: fatal error: openssl/evp.h: No such file or directoryAdd an entry about the need of installing the 'libssl-dev' package.
Signed-off-by Fabio Estevam <[email protected]>---
Changes since v1:
- Do not remove the 'elftosb' text.doc/README.mxs | 5 +++++ 1 file changed, 5 insertions(+)doc/README.mxs +0
-0@@ -63,6 +63,11 @@ copy the binary by hand: Make sure the "elftosb" binary can be found in your $PATH, in this casethis means "
/usr/local/bin/" has to be in your $PATH.+Install the 'libssl-dev' package as well. On a Ubuntu-based distribution, this +package can be installed as follows:
doc/README.mxs copy the binary by hand: · line 70
Quoted 3 lines
doc/README.mxs +3
-0+ + $ sudo apt-get install libssl-dev +
Since when is Ubuntu not a Debian based distro ? :-( I think you should stick with the roots here, use Debian.
Quoted 2 lines
2) Compiling U-Boot for a MXS based board
-------------------------------------------
Best regards,
Marek Vasut
Fabio Estevam
reviewerPATCH v2 1/1 doc: README.mxs: Add instruction to install 'libssl-dev'
Quoted 2 lines · Marek Vasut
Since when is Ubuntu not a Debian based distro ? :-( I think you should stick with the roots here, use Debian.
Yes, I wrote "Debian-based" in v1. The change here was not on purpose, so I can fix it in v3.
Actually, I have been thinking about this fix: wouldn't it be better to copy the 'openssl/evp.h' header into U-boot tool directory to avoid people getting failures with MAKEALL if they do not have libssl-dev installed?
PATCH v2 1/1 doc: README.mxs: Add instruction to install 'libssl-dev'
Dear Fabio Estevam,
Quoted 11 lines · Marek Vasut
Quoted 2 lines
Since when is Ubuntu not a Debian based distro ? :-( I think you should stick with the roots here, use Debian.
Yes, I wrote "Debian-based" in v1. The change here was not on purpose, so I can fix it in v3.
Actually, I have been thinking about this fix: wouldn't it be better to copy the '
openssl/evp.h' header into U-boot tool directory to avoid people getting failures with MAKEALL if they do not have libssl-dev installed?
No, because they won't be able to link without the dev package anyway.
Best regards,
Marek Vasut
PATCH v2 1/1 doc: README.mxs: Add instruction to install 'libssl-dev'
In reply to Fabio EstevamQuoted 5 lines · Fabio Estevam
Quoted 2 lines · Marek Vasut
Since when is Ubuntu not a Debian based distro ? :-( I think you should stick with the roots here, use Debian.
Quoted 8 lines
Yes, I wrote "Debian-based" in v1. The change here was not on purpose, so I can fix it in v3.
Actually, I have been thinking about this fix: wouldn't it be better to copy the '
openssl/evp.h' header into U-boot tool directory to avoid people getting failures with MAKEALL if they do not have libssl-dev installed?
I disagree : it is not different if another include file is missing, or the host is not installed. Then the hint is to install build-essential (Ubuntu) or all packages, not to move them inside u-boot.
Regards,
Stefano
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================
PATCH v2 1/1 doc: README.mxs: Add instruction to install 'libssl-dev'
Dear Stefano Babic,
Quoted 8 lines · Fabio Estevam
Quoted 7 lines · Marek Vasut
Quoted 2 lines
Since when is Ubuntu not a Debian based distro ? :-( I think you should stick with the roots here, use Debian.
Yes, I wrote "Debian-based" in v1. The change here was not on purpose, so I can fix it in v3.
Quoted 8 lines
Quoted 4 lines
Actually, I have been thinking about this fix: wouldn't it be better to copy the '
openssl/evp.h' header into U-boot tool directory to avoid people getting failures with MAKEALL if they do not have libssl-dev installed?I disagree : it is not different if another include file is missing, or the host is not installed. Then the hint is to install build-essential (Ubuntu) or all packages, not to move them inside u-boot.
Hey, build-essential is also Debian (lol) ! ;-)
Best regards,
Marek Vasut
PATCH v2 1/1 doc: README.mxs: Add instruction to install 'libssl-dev'
Quoted 15 lines · Marek Vasut
Dear Stefano Babic,
Quoted 13 lines · Fabio Estevam
Quoted 11 lines · Marek Vasut
Quoted 2 lines
Since when is Ubuntu not a Debian based distro ? :-( I think you should stick with the roots here, use Debian.
Yes, I wrote "Debian-based" in v1. The change here was not on purpose, so I can fix it in v3.
Actually, I have been thinking about this fix: wouldn't it be better to copy the '
openssl/evp.h' header into U-boot tool directory to avoid people getting failures with MAKEALL if they do not have libssl-dev installed?
Quoted 5 lines
Quoted 3 lines
I disagree : it is not different if another include file is missing, or the host is not installed. Then the hint is to install build-essential (Ubuntu) or all packages, not to move them inside u-boot.
Hey, build-essential is also Debian (lol) ! ;-)
Debian +1 :-)
Signature · 3 lines
Otavio Salvador O.S. Systems http://www.ossystems.com.br http://code.ossystems.com.br Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750