Skip to contentSkip to conversation

Cubieboard2 support

Buildroot New Carlos Quijano 3 participants 8 messages Sep 16, 2013 Arm/Allwinner sunXi SoC support

lore
Share & tools
lore
#1 lore raw

PATCH 1/3 support for cubieboard2 added

---
 board/cubietech/cubieboard2/boot.cmd               |    4 +
 .../cubieboard2/cubieboard2_kernel.config          | 3158 ++++++++++++++++++++
 board/cubietech/cubieboard2/mkcubiecard.sh         |  116 +
 board/cubietech/cubieboard2/post-build.sh          |   14 +
 board/cubietech/cubieboard2/readme.txt             |   59 +
 configs/cubieboard2_defconfig                      |   40 +
 package/sunxi-boards/sunxi-boards.mk               |    2 +-
 7 files changed, 3392 insertions(+), 1 deletion(-)
 create mode 100644 board/cubietech/cubieboard2/boot.cmd
 create mode 100644 board/cubietech/cubieboard2/cubieboard2_kernel.config
 create mode 100755 board/cubietech/cubieboard2/mkcubiecard.sh
 create mode 100755 board/cubietech/cubieboard2/post-build.sh
 create mode 100644 board/cubietech/cubieboard2/readme.txt
 create mode 100644 configs/cubieboard2_defconfig
board/cubietech/cubieboard2/boot.cmd new file +4 -0
new file mode 100644
index 0000000..849ed00
@@ -0,0 +1,4 @@
+setenv bootargs console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait panic=10 ${extra}
+fatload mmc 0 0x43000000 script.bin
+fatload mmc 0 0x48000000 uImage
+bootm 0x48000000
board/cubietech/cubieboard2/cubieboard2_kernel.config new file +3158 -0

2,996 lines not on this page · raw message

board/cubietech/cubieboard2/mkcubiecard.sh new file +116 -0

116 lines not on this page · raw message

board/cubietech/cubieboard2/post-build.sh new file +14 -0
new file mode 100755
index 0000000..1b0258c

Lines of this file are not shown. View the raw message.

board/cubietech/cubieboard2/readme.txt new file +59 -0

59 lines not on this page · raw message

configs/cubieboard2_defconfig new file +40 -0
new file mode 100644
index 0000000..b72a611

Lines of this file are not shown. View the raw message.

package/sunxi-boards/sunxi-boards.mk +1 -1
index 6c28e42..ef5b34d 100644

Lines of this file are not shown. View the raw message.

The rest of this diff is not shown. View the raw message.

Signature · 1 line
1.7.9.5

Part of the diff is not shown here. View the raw message.

#2 lore raw

PATCH 1/3 support for cubieboard2 added

Dear Carlos Quijano,

Generally looks good, except:

Quoted 5 lines · Carlos Quijano
---
 board/cubietech/cubieboard2/boot.cmd               |    4 +
 .../cubieboard2/cubieboard2_kernel.config          | 3158 ++++++++++++++++++++

The kernel configuration should be a minimal defconfig, generated with 'make ARCH=arm savedefconfig'. See the size of the kernel configuration files for the other platforms.

Also, the file should be named just kernel.config, or linux.config, or linux-<version>.config. Having the name of the board in the filename is useless since it's already in a directory named after the board.

Thanks!

Thomas

Signature · 4 lines
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
#3 lore raw

PATCH 1/3 support for cubieboard2 added

In reply to Carlos Quijano
Quoted 11 lines · Carlos Quijano
---
  board/cubietech/cubieboard2/boot.cmd               |    4 +
  .../cubieboard2/cubieboard2_kernel.config          | 3158 ++++++++++++++++++++
  board/cubietech/cubieboard2/mkcubiecard.sh         |  116 +
  board/cubietech/cubieboard2/post-build.sh          |   14 +
  board/cubietech/cubieboard2/readme.txt             |   59 +
  configs/cubieboard2_defconfig                      |   40 +
  package/sunxi-boards/sunxi-boards.mk               |    2 +-
  7 files changed, 3392 insertions(+), 1 deletion(-)
Quoted 5 lines

create mode 100644 board/cubietech/cubieboard2/boot.cmd create mode 100644 board/cubietech/cubieboard2/cubieboard2_kernel.config create mode 100755 board/cubietech/cubieboard2/mkcubiecard.sh create mode 100755 board/cubietech/cubieboard2/post-build.sh create mode 100644 board/cubietech/cubieboard2/readme.txt

As far as I can see, the scripts and readme are an exact copy of
cubieboard. I think it makes more sense then to make them symlinks to the cubieboard directory, to ensure consistency. Or perhaps it's even better to keep using the cubieboard directory for cubieboard2, and make a linux-cubieboard2.config.

Quoted 1 line

create mode 100644 configs/cubieboard2_defconfig

[snip]

Quoted 6 lines
configs/cubieboard2_defconfig new file +0 -0
new file mode 100644
index 0000000..b72a611

configs/cubieboard2_defconfig line 10

Quoted 10 lines
configs/cubieboard2_defconfig new file +10 -0
@@ -0,0 +1,40 @@
+# Architecture
+BR2_arm=y
+BR2_cortex_a7=y
+
+# System configuration
+BR2_TARGET_GENERIC_HOSTNAME="Cubieboard2"
+BR2_TARGET_GENERIC_ISSUE="Welcome to use Cubieboard!"
+BR2_TARGET_GENERIC_GETTY=y
+BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
+BR2_ROOTFS_POST_IMAGE_SCRIPT="board/cubietech/cubieboard/post-build.sh"

This should be cubieboard2/post-build.sh, right? :-)

Quoted 35 lines
configs/cubieboard2_defconfig new file +30 -0
+
+# Additional tools
+BR2_PACKAGE_HOST_SUNXI_TOOLS=y
+BR2_PACKAGE_HOST_UBOOT_TOOLS=y
+BR2_PACKAGE_SUNXI_TOOLS=y
+BR2_PACKAGE_SUNXI_BOARDS=y
+BR2_PACKAGE_SUNXI_BOARDS_FEX_FILE="a20/cubieboard2.fex"
+
+# Kernel headers
+BR2_KERNEL_HEADERS_3_4=y
+
+# Kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_GIT=y
+BR2_LINUX_KERNEL_CUSTOM_GIT_REPO_URL="https://github.com/linux-sunxi/linux-sunxi.git"
+BR2_LINUX_KERNEL_CUSTOM_GIT_VERSION="5dda5145c877335e17bd9ca48954841acc0f785a"
+BR2_LINUX_KERNEL_VERSION="sunxi-3.4"
+BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/cubietech/cubieboard2/cubieboard2_kernel.config"
+
+# Bootloaders
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BOARDNAME="cubieboard2"
+BR2_TARGET_UBOOT_CUSTOM_GIT=y
+BR2_TARGET_UBOOT_VERSION="sunxi"
+BR2_TARGET_UBOOT_CUSTOM_GIT_REPO_URL="https://github.com/linux-sunxi/u-boot-sunxi.git"
+BR2_TARGET_UBOOT_CUSTOM_GIT_VERSION="b4bca5e0651b460a4511582f07a935cb48f74948"
+BR2_TARGET_UBOOT_FORMAT_BIN=y
+BR2_TARGET_UBOOT_SPL=y
+BR2_TARGET_UBOOT_SPL_NAME="u-boot-sunxi-with-spl.bin"
package/sunxi-boards/sunxi-boards.mk +0 -0
index 6c28e42..ef5b34d 100644

package/sunxi-boards/sunxi-boards.mk line 7

Quoted 5 lines
package/sunxi-boards/sunxi-boards.mk +1 -1
@@ -4,7 +4,7 @@
  #
  ################################################################################
 
-SUNXI_BOARDS_VERSION = 88d663db44f65b73ef65c4148a28c6fa3665d2b6
+SUNXI_BOARDS_VERSION = 25a868189dbaa40872b2ac7d8a941dd73972eb08

I think this version bump should be a separate patch.

Regards,
Arnout

Quoted 4 lines
package/sunxi-boards/sunxi-boards.mk +0 -0
  SUNXI_BOARDS_SITE = https://github.com/linux-sunxi/sunxi-boards/tarball/$(SUNXI_BOARDS_VERSION)
  SUNXI_BOARDS_DEPENDENCIES = host-sunxi-tools
  SUNXI_BOARDS_INSTALL_IMAGES = YES
Signature · 6 lines
Arnout Vandecappelle                          arnout at mind be
Senior Embedded Software Architect            +32-16-286500
Essensium/Mind                                http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium           BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint:  7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F
#4 lore raw

PATCH 2/3 updated author and readme

In reply to Carlos Quijano
---
 board/cubietech/cubieboard2/mkcubiecard.sh |    2 ++
 board/cubietech/cubieboard2/readme.txt     |   11 ++++++-----
 2 files changed, 8 insertions(+), 5 deletions(-)
board/cubietech/cubieboard2/mkcubiecard.sh +2 -0
index 652a3da..404fb65 100755
@@ -1,4 +1,6 @@
 #! /bin/sh
+# updated for cubiboard2:
+# 2013, Carlos Quijano <[email protected]>
 # mkCubieCard.sh v0.1:
 # 2013, Carlo Caione <[email protected]>
 # heavely based on :
board/cubietech/cubieboard2/readme.txt +6 -5
index 1c47117..cd30b95 100644
@@ -1,10 +1,10 @@
-cubieboard
+cubieboard2
 
 -----
 Intro
 -----
 
-To be able to use your cubieboard board with the images generated by
+To be able to use your cubieboard board2 with the images generated by
 Buildroot you have to correctly setup the SD card.
 
 For more information, please see http://linux-sunxi.org/FirstSteps
@@ -14,7 +14,7 @@ How to build it
 ---------------
 
 You need to use the cubieboard_defconfig, to do so:
- * make cubieboard_defconfig
+ * make cubieboard2_defconfig
 
 And to compile:
  * make
@@ -29,8 +29,7 @@ After building, you should obtain this tree:
     +-- rootfs.tar
     +-- boot.scr
     +-- script.bin
-    +-- sunxi-spl.bin
-    +-- u-boot.bin
+    +-- u-boot-sunxi-with-spl.bin
     `-- uImage
 
 --------------------------
@@ -56,4 +55,6 @@ where:
 
 
 --
+Carlos Quijano <[email protected]>
+Based on cubieboard support from:
 Carlo Caione <[email protected]>
Signature · 1 line
1.7.9.5
#5 lore raw

PATCH 2/3 updated author and readme

Dear Carlos Quijano,

Any reason why this isn't part of the patch introducing mkcubiecard.sh and readme.txt ?

board/cubietech/cubieboard2/readme.txt line 7

Quoted 2 lines · Carlos Quijano
board/cubietech/cubieboard2/readme.txt +1 -1
-To be able to use your cubieboard board with the images generated by
+To be able to use your cubieboard board2 with the images generated by

I guess the change should be "cubieboard2 board".

Thomas

Signature · 4 lines
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
#6 lore raw

PATCH 3/3 enable needed modules for cubieboard2

In reply to Carlos Quijano
---
 .../cubieboard2/cubieboard2_kernel.config          |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
board/cubietech/cubieboard2/cubieboard2_kernel.config +2 -2
index 081e00b..690b5a1 100644
@@ -2109,9 +2109,9 @@ CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_SUNXI=y
 CONFIG_FB_SUNXI_RESERVED_MEM=y
 CONFIG_FB_SUNXI_UMP=y
-# CONFIG_FB_SUNXI_LCD is not set
+CONFIG_FB_SUNXI_LCD=y
 CONFIG_FB_SUNXI_HDMI=y
-# CONFIG_HDMI_CEC is not set
+CONFIG_HDMI_CEC=y
 # CONFIG_FB_ARMCLCD is not set
 # CONFIG_FB_UVESA is not set
 # CONFIG_FB_S1D13XXX is not set
Signature · 1 line
1.7.9.5
#7 lore raw

PATCH 3/3 enable needed modules for cubieboard2

Dear Carlos Quijano,

Quoted 6 lines · Carlos Quijano
board/cubietech/cubieboard2/cubieboard2_kernel.config +0 -0
index 081e00b..690b5a1 100644
@@ -2109,9 +2109,9 @@ CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_SUNXI=y

board/cubietech/cubieboard2/cubieboard2_kernel.config CONFIG_FB_MODE_HELPERS=y · line 2117

Quoted 10 lines
board/cubietech/cubieboard2/cubieboard2_kernel.config +2 -2
 CONFIG_FB_SUNXI_RESERVED_MEM=y
 CONFIG_FB_SUNXI_UMP=y
-# CONFIG_FB_SUNXI_LCD is not set
+CONFIG_FB_SUNXI_LCD=y
 CONFIG_FB_SUNXI_HDMI=y
-# CONFIG_HDMI_CEC is not set
+CONFIG_HDMI_CEC=y
 # CONFIG_FB_ARMCLCD is not set
 # CONFIG_FB_UVESA is not set
 # CONFIG_FB_S1D13XXX is not set

This should be part of the patch adding the kernel configuration file.

Thomas

Signature · 4 lines
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com