Skip to contentSkip to conversation

Openpowerlink: new package

PATCH Superseded Romain Naour 3 participants 4 messages Sep 21, 2013 – Sep 24, 2013 1 message not in the archive

v1 of 3 Superseded Latest is v3 →

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

#1 lore raw

PATCH 1/1 Openpowerlink: new package

---
v1:
- Move openpowerlink to hardware handling menu
- Add package sources url
- Add some help in menuconfig
- Fix typo
- Move openpowerlink demos in a submenu
- Fix patch name
- Fix debug default value
- Add build Release or Debug depending on BR2_ENABLE_DEBUG

v0: initial commit
- Add openpowerlink package.

---
 package/Config.in                                  |   1 +
 package/openpowerlink/Config.in                    | 107 +++++++++++++++++++++
 .../openpowerlink-0001-fix-demo-mn-qt.patch        |  22 +++++
 package/openpowerlink/openpowerlink.mk             |  92 ++++++++++++++++++
 4 files changed, 222 insertions(+)
 create mode 100644 package/openpowerlink/Config.in
 create mode 100644 package/openpowerlink/openpowerlink-0001-fix-demo-mn-qt.patch
 create mode 100644 package/openpowerlink/openpowerlink.mk
package/Config.in +1 -0
index e1dfd5d..911cba1 100644
@@ -309,6 +309,7 @@ source "package/ofono/Config.in"
 source "package/on2-8170-modules/Config.in"
 source "package/open2300/Config.in"
 source "package/openocd/Config.in"
+source "package/openpowerlink/Config.in"
 source "package/owl-linux/Config.in"
 source "package/parted/Config.in"
 source "package/pciutils/Config.in"
package/openpowerlink/Config.in new file +107 -0

107 lines not on this page · raw message

package/openpowerlink/openpowerlink-0001-fix-demo-mn-qt.patch new file +22 -0
new file mode 100644
index 0000000..55a3bb5
@@ -0,0 +1,22 @@
+commit 8658075bd7c49a7481e8f6d0d7a13b0651e1dfd7
+Author: Romain Naour <[email protected]>
+Date:   Wed Sep 18 23:33:04 2013 +0200
+
+    [FIX] demo_mn_qt: add EplDebug.c in demo_sources list
+    
+    demo_mn_qt use EplGetEmergErrCodeStr()
+    
+    Signed-off-by: Romain Naour <[email protected]>
+
+diff --git a/Examples/X86/Generic/demo_mn_qt/CMakeLists.txt b/Examples/X86/Generic/demo_mn_qt/CMakeLists.txt
+index 9db2f7f..48ae9eb 100644
+--- a/Examples/X86/Generic/demo_mn_qt/CMakeLists.txt
++++ b/Examples/X86/Generic/demo_mn_qt/CMakeLists.txt
+@@ -78,6 +78,7 @@ SET(DEMO_SOURCES src/EplApi.cpp
+                  src/MainWindow.cpp
+                  src/NodeState.cpp
+                  ${POWERLINK_SOURCE_DIR}/ObjDicts/${OBJDICT}/EplApiProcessImageSetup.c
++                 ${POWERLINK_SOURCE_DIR}/EplStack/EplDebug.c
+     )
+ 
+ # The TRACE macros need trace.c on the Windows platform
package/openpowerlink/openpowerlink.mk new file +92 -0

92 lines not on this page · raw message

Signature · 1 line
1.8.4
#2 lore raw

PATCH 1/1 Openpowerlink: new package

Dear Romain Naour,

package/openpowerlink/openpowerlink.mk line 3

Quoted 6 lines · Romain Naour
package/openpowerlink/openpowerlink.mk new file +3 -0
@@ -0,0 +1,92 @@
+################################################################################
+#
+# openPOWERLINK

It should be lower cased completely.

Quoted 11 lines
package/openpowerlink/openpowerlink.mk new file +11 -0
+#
+################################################################################
+
+OPENPOWERLINK_VERSION = V1.08.3
+OPENPOWERLINK_SOURCE = openPOWERLINK-$(OPENPOWERLINK_VERSION).zip
+OPENPOWERLINK_SITE = http://downloads.sourceforge.net/project/openpowerlink/openPOWERLINK/V1.8.3
+
+OPENPOWERLINK_LICENSE = BSD-2c, GPLv2
+OPENPOWERLINK_LICENSE_FILES = license.txt
+OPENPOWERLINK_INSTALL_STAGING = YES
+

package/openpowerlink/openpowerlink.mk line 24

Quoted 10 lines
package/openpowerlink/openpowerlink.mk new file +10 -0
+ifeq ($(BR2_i386),y)
+OPENPOWERLINK_ARCH = x86
+endif
+
+ifeq ($(BR2_x86_64),y)
+OPENPOWERLINK_ARCH = x86_64
+endif
+
+OPENPOWERLINK_CONF_OPT = -DCMAKE_SYSTEM_PROCESSOR=$(OPENPOWERLINK_ARCH)
+OPENPOWERLINK_CONF_OPT += -DCMAKE_INSTALL_PREFIX=/usr/

We normally put such things with one statement:

FOO_CONF_OPT = \
	BLEH1 \
	BLEH2

*But* in this particular case, there is no need to pass -DCMAKE_INSTALL_PREFIX, because it is already passed by the CMake package infrastructure.

Thomas

Signature · 3 lines
Thomas Petazzoni, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
#3 lore raw

PATCH 1/1 Openpowerlink: new package

Hi Thomas,

----- Mail original -----

| De: "Thomas Petazzoni" <[email protected]>
| ?: "Romain Naour" <[email protected]>
| Cc: "buildroot" <[email protected]>
| Envoy?: Dimanche 22 Septembre 2013 15:50:36
| Objet: Re: [Buildroot] [PATCH v1 1/1] Openpowerlink: new package
| 
| Dear Romain Naour,
| 
| On Sat, 21 Sep 2013 12:20:00 +0200 (CEST), Romain Naour wrote:
| 
| > --- /dev/null
| > +++ b/package/openpowerlink/openpowerlink.mk
| > @@ -0,0 +1,92 @@
| > +################################################################################
| > +#
| > +# openPOWERLINK
| 
| It should be lower cased completely.
| 
| > +#
| > +################################################################################
| > +
| > +OPENPOWERLINK_VERSION = V1.08.3
| > +OPENPOWERLINK_SOURCE = openPOWERLINK-$(OPENPOWERLINK_VERSION).zip
| > +OPENPOWERLINK_SITE =
| > http://downloads.sourceforge.net/project/openpowerlink/openPOWERLINK/V1.8.3
| > +
| > +OPENPOWERLINK_LICENSE = BSD-2c, GPLv2
| > +OPENPOWERLINK_LICENSE_FILES = license.txt
| > +OPENPOWERLINK_INSTALL_STAGING = YES
| > +
| > +ifeq ($(BR2_i386),y)
| > +OPENPOWERLINK_ARCH = x86
| > +endif
| > +
| > +ifeq ($(BR2_x86_64),y)
| > +OPENPOWERLINK_ARCH = x86_64
| > +endif
| > +
| > +OPENPOWERLINK_CONF_OPT =
| > -DCMAKE_SYSTEM_PROCESSOR=$(OPENPOWERLINK_ARCH)
| > +OPENPOWERLINK_CONF_OPT += -DCMAKE_INSTALL_PREFIX=/usr/
| 
| We normally put such things with one statement:
| 
| FOO_CONF_OPT = \
| 	BLEH1 \
| 	BLEH2
| 
| *But* in this particular case, there is no need to pass
| -DCMAKE_INSTALL_PREFIX, because it is already passed by the CMake
| package infrastructure.

Thanks for the advice.

Best regards,
Romain

| 
| Thomas
| --
| Thomas Petazzoni, Free Electrons
| Embedded Linux, Kernel and Android engineering
| http://free-electrons.com
| 
#4 lore raw

PATCH 1/1 Openpowerlink: new package

In reply to Romain Naour

Romain Naour <[email protected]> schreef:

Quoted 269 lines

---
v1:
- Move openpowerlink to hardware handling menu
- Add package sources url
- Add some help in menuconfig
- Fix typo
- Move openpowerlink demos in a submenu
- Fix patch name
- Fix debug default value
- Add build Release or Debug depending on BR2_ENABLE_DEBUG

v0: initial commit
- Add openpowerlink package.

---

package/Config.in                                  |   1 +
package/openpowerlink/Config.in                    | 107 +++++++++++++++++++++
.../openpowerlink-0001-fix-demo-mn-qt.patch        |  22 +++++
package/openpowerlink/openpowerlink.mk             |  92 ++++++++++++++++++
4 files changed, 222 insertions(+)

create mode 100644 package/openpowerlink/Config.in
create mode 100644 package/openpowerlink/openpowerlink-0001-fix-demo-mn-qt.patch create mode 100644 package/openpowerlink/openpowerlink.mk

package/Config.in +0 -0
index e1dfd5d..911cba1 100644
@@ -309,6 +309,7 @@ source "package/ofono/Config.in"

source "package/on2-8170-modules/Config.in"
source "package/open2300/Config.in"
source "package/openocd/Config.in"
+source "package/openpowerlink/Config.in"
source "package/owl-linux/Config.in"
source "package/parted/Config.in"
source "package/pciutils/Config.in"

package/openpowerlink/Config.in new file +107 -0
new file mode 100644
index 0000000..1bf6559
@@ -0,0 +1,107 @@
+comment "openpowerlink requires thread support in toolchain"
+	depends on !BR2_TOOLCHAIN_HAS_THREADS
+
+config BR2_PACKAGE_OPENPOWERLINK
+	bool "openpowerlink"
+	depends on BR2_TOOLCHAIN_HAS_THREADS
+	depends on BR2_i386 || BR2_x86_64
+	help
+	  openPOWERLINK is an Open Source Industrial Ethernet 
+	  stack implementing the POWERLINK protocol for Managing Node 
+	  (MN, POWERLINK Master) and Controlled Node (CN, POWERLINK Slave).
+
+	  It is provided by SYSTEC electronic (http://www.systec-electronic.com), 
+	  B&R (http://www.br-automation.com) and 
+	  Kalycito (http://www.kalycito.com).
+
+	  https://sourceforge.net/projects/openpowerlink/
+
+if BR2_PACKAGE_OPENPOWERLINK
+
+choice
+	prompt "stack implementation"
+
+config BR2_PACKAGE_OPENPOWERLINK_LIBPCAP
+	bool "userspace stack"
+	select BR2_PACKAGE_LIBPCAP
+	help
+	  The Linux userspace implementation of the openPOWERLINK stack provides all
+	  functions for a software based POWERLINK solution running as Linux userspace
+	  application. The stack uses the libpcap library for accessing the network
+	  interface and is therefore totally independant of the used network card and
+	  driver.
+
+config BR2_PACKAGE_OPENPOWERLINK_KERNEL_MODULE
+	bool "kernel stack"
+	depends on BR2_LINUX_KERNEL
+	help
+	  The openPOWERLINK stack may be implemented as Linux kernel module. 
+	  This solution provides the best performance, but is limited to the available 
+	  openPOWERLINK network drivers.
+	  You may select BR2_PACKAGE_PCIUTILS for lscpi, and BR2_PACKAGE_PROCPS for ps command.
+	  These commands are used in EplLoad and EplUndload scripts.
+
+endchoice
+
+if BR2_PACKAGE_OPENPOWERLINK_KERNEL_MODULE
+
+choice
+	prompt "select Ethernet Powerlink Driver"
+
+config BR2_PACKAGE_OPENPOWERLINK_82573
+	bool "Intel 82573"
+
+config BR2_PACKAGE_OPENPOWERLINK_8255x
+	bool "Intel 8255x"
+
+config BR2_PACKAGE_OPENPOWERLINK_RTL8139
+	bool "Realtek RTL-8139"
+
+endchoice
+
+endif
+
+choice
+	prompt "Select MN/CN mode"
+
+	config BR2_PACKAGE_OPENPOWERLINK_MN
+	bool "MN"
+	help
+	  Enable Managing Node mode
+
+	config BR2_PACKAGE_OPENPOWERLINK_CN
+	bool "CN"
+	help
+	  Enable Controlled Node mode
+
+endchoice
+
+menu "openpowerlink demos"
+
+config BR2_PACKAGE_OPENPOWERLINK_DEMO_MN_CONSOLE
+	bool "console MN demo"
+	depends on BR2_PACKAGE_OPENPOWERLINK_MN
+
+config BR2_PACKAGE_OPENPOWERLINK_DEMO_MN_QT
+	bool "qt MN demo"
+	depends on BR2_PACKAGE_OPENPOWERLINK_MN
+	select BR2_PACKAGE_QT
+	select BR2_PACKAGE_QT_STL
+
+config BR2_PACKAGE_OPENPOWERLINK_DEMO_CN_CONSOLE
+	bool "console CN demo"
+	depends on !BR2_PACKAGE_OPENPOWERLINK_MN
+
+config BR2_PACKAGE_OPENPOWERLINK_DEMO_LINUX_KERNEL
+	bool "kernel demo"
+	depends on BR2_PACKAGE_OPENPOWERLINK_KERNEL_MODULE
+
+endmenu
+
+config BR2_PACKAGE_OPENPOWERLINK_DEBUG_LEVEL
+	string "debug level for openpowerlink stack"
+	default "0xEC000000L"
+	help
+	  Debug level to be used for openPOWERLINK debugging functions.
+
+endif
package/openpowerlink/openpowerlink-0001-fix-demo-mn-qt.patch new file +22 -0
new file mode 100644
index 0000000..55a3bb5
@@ -0,0 +1,22 @@
+commit 8658075bd7c49a7481e8f6d0d7a13b0651e1dfd7
+Author: Romain Naour <[email protected]>
+Date:   Wed Sep 18 23:33:04 2013 +0200
+
+    [FIX] demo_mn_qt: add EplDebug.c in demo_sources list
+    
+    demo_mn_qt use EplGetEmergErrCodeStr()
+    
+    Signed-off-by: Romain Naour <[email protected]>
+
+diff --git a/Examples/X86/Generic/demo_mn_qt/CMakeLists.txt b/Examples/X86/Generic/demo_mn_qt/CMakeLists.txt
+index 9db2f7f..48ae9eb 100644
+--- a/Examples/X86/Generic/demo_mn_qt/CMakeLists.txt
++++ b/Examples/X86/Generic/demo_mn_qt/CMakeLists.txt
+@@ -78,6 +78,7 @@ SET(DEMO_SOURCES src/EplApi.cpp
+                  src/MainWindow.cpp
+                  src/NodeState.cpp
+                  ${POWERLINK_SOURCE_DIR}/ObjDicts/${OBJDICT}/EplApiProcessImageSetup.c
++                 ${POWERLINK_SOURCE_DIR}/EplStack/EplDebug.c
+     )
+ 
+ # The TRACE macros need trace.c on the Windows platform
package/openpowerlink/openpowerlink.mk new file +82 -0
new file mode 100644
index 0000000..37b9def
@@ -0,0 +1,92 @@
+################################################################################
+#
+# openPOWERLINK
+#
+################################################################################
+
+OPENPOWERLINK_VERSION = V1.08.3
+OPENPOWERLINK_SOURCE = openPOWERLINK-$(OPENPOWERLINK_VERSION).zip
+OPENPOWERLINK_SITE = http://downloads.sourceforge.net/project/openpowerlink/openPOWERLINK/V1.8.3
+
+OPENPOWERLINK_LICENSE = BSD-2c, GPLv2
+OPENPOWERLINK_LICENSE_FILES = license.txt
+OPENPOWERLINK_INSTALL_STAGING = YES
+
+ifeq ($(BR2_i386),y)
+OPENPOWERLINK_ARCH = x86
+endif
+
+ifeq ($(BR2_x86_64),y)
+OPENPOWERLINK_ARCH = x86_64
+endif
+
+OPENPOWERLINK_CONF_OPT = -DCMAKE_SYSTEM_PROCESSOR=$(OPENPOWERLINK_ARCH)
+OPENPOWERLINK_CONF_OPT += -DCMAKE_INSTALL_PREFIX=/usr/
+
+ifeq ($(BR2_ENABLE_DEBUG),y)
+OPENPOWERLINK_CONF_OPT += -DCMAKE_BUILD_TYPE=Debug
+else
+OPENPOWERLINK_CONF_OPT += -DCMAKE_BUILD_TYPE=Release
+endif
+
+OPENPOWERLINK_CONF_OPT += -DCFG_DEBUG_LVL=$(call qstrip,$(BR2_PACKAGE_OPENPOWERLINK_DEBUG_LEVEL))
+
+ifeq ($(BR2_PACKAGE_OPENPOWERLINK_LIBPCAP),y)
+#  use the user space stack (libpcap)
+OPENPOWERLINK_CONF_OPT += -DCFG_KERNEL_STACK=OFF
+OPENPOWERLINK_DEPENDENCIES = libpcap
+else
+# use the kernel stack
+OPENPOWERLINK_CONF_OPT += -DCFG_KERNEL_STACK=ON
+OPENPOWERLINK_CONF_OPT += -DCFG_KERNEL_DIR=$(LINUX_DIR)
+OPENPOWERLINK_CONF_OPT += -DCMAKE_SYSTEM_VERSION=$(LINUX_VERSION)
+OPENPOWERLINK_DEPENDENCIES = linux
+endif
+
+ifeq ($(BR2_PACKAGE_OPENPOWERLINK_82573),y)
+OPENPOWERLINK_CONF_OPT += -DCFG_POWERLINK_EDRV=82573
+else ifeq ($(BR2_PACKAGE_OPENPOWERLINK_RTL8139),y)
+OPENPOWERLINK_CONF_OPT += -DCFG_POWERLINK_EDRV=8139
+else ifeq ($(BR2_PACKAGE_OPENPOWERLINK_8255x),y)
+OPENPOWERLINK_CONF_OPT += -DCFG_POWERLINK_EDRV=8255x
+endif
+
+ifeq ($(BR2_PACKAGE_OPENPOWERLINK_MN),y)
+OPENPOWERLINK_CONF_OPT += -DCFG_POWERLINK_MN=ON
+else
+OPENPOWERLINK_CONF_OPT += -DCFG_POWERLINK_MN=OFF
+endif
+
+ifeq ($(BR2_PACKAGE_OPENPOWERLINK_DEMO_MN_CONSOLE),y)
+OPENPOWERLINK_CONF_OPT += -DCFG_X86_DEMO_MN_CONSOLE=ON
+else
+OPENPOWERLINK_CONF_OPT += -DCFG_X86_DEMO_MN_CONSOLE=OFF
+endif
+
+ifeq ($(BR2_PACKAGE_OPENPOWERLINK_DEMO_MN_QT),y)
+OPENPOWERLINK_CONF_OPT += -DCFG_X86_DEMO_MN_QT=ON
+OPENPOWERLINK_DEPENDENCIES += qt
+else
+OPENPOWERLINK_CONF_OPT += -DCFG_X86_DEMO_MN_QT=OFF
+endif
+
+ifeq ($(BR2_PACKAGE_OPENPOWERLINK_DEMO_CN_CONSOLE),y)
+OPENPOWERLINK_CONF_OPT += -DCFG_X86_DEMO_CN_CONSOLE=ON
+else
+OPENPOWERLINK_CONF_OPT += -DCFG_X86_DEMO_CN_CONSOLE=OFF
+endif
+
+ifeq ($(BR2_PACKAGE_OPENPOWERLINK_DEMO_LINUX_KERNEL),y)
+OPENPOWERLINK_CONF_OPT += -DCFG_X86_DEMO_LINUX_KERNEL=ON
+else
+OPENPOWERLINK_CONF_OPT += -DCFG_X86_DEMO_LINUX_KERNEL=OFF

package/openpowerlink/openpowerlink.mk line 92

Quoted 10 lines
package/openpowerlink/openpowerlink.mk new file +10 -0
+endif
+
+define OPENPOWERLINK_EXTRACT_CMDS
+	$(RM) -rf $(OPENPOWERLINK_DIR)
+	unzip -q -d $(BUILD_DIR)/ $(DL_DIR)/$(OPENPOWERLINK_SOURCE)
+	test -d $(OPENPOWERLINK_DIR) || \
+		mv $(BUILD_DIR)/$(subst .zip,,$(OPENPOWERLINK_SOURCE)) $(OPENPOWERLINK_DIR)
+endef
+
+$(eval $(cmake-package))

Victory! With my patched k9, wrapping should be disabled now.
This is still hacked in, as I couldn't yet make a cleaner way work (crash when opening preferences).

Best regards,
Thomas