Skip to contentSkip to conversation

powertop 2.4 questions

Powertop Srinivas Pandruvada 6 participants 18 messages Sep 18, 2013 – Oct 18, 2013 1 message not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

Srinivas Pandruvada

author
#1 lore raw

Did anybody observed this issue?

-------- Original Message --------
Subject: powertop 2.4 questions
Date: Tue, 17 Sep 2013 10:14:49 -0700
From: Marc MERLIN <marc(a)merlins.org>
To: srinivas.pandruvada(a)linux.intel.com

Hi Srinivas,

As discussed, I have a couple of powertop questions, thanks for passing them on.
I did try the mailing list:
Date: Fri, 2 Aug 2013 10:27:38 -0700
From: Marc MERLIN <marc_powertop(a)merlins.org>
To: powertop(a)ml01.01.org

but I never heard anything back. Is the list mostly dead, or is there another list?

So, I got powertop 2.4 from
https://01.org/powertop/downloads/2013/powertop-v2.4

Like I showed you on my laptop, when I go left and right with my arrows, I'm on the Overview screen, and I can't move to Idle stats or Freq stats like I could in older powertops:

----------------------------------------------------------------------------
PowerTOP 2.4 Overview Idle stats Frequency stats Device stats Tunables

Summary: 1862.8 wakeups/second, 5.9 GPU ops/seconds, 0.0 VFS ops/sec and 26.5% CPU use

Power est. Usage Events/s Category Description

   3.30 W      9.8%                      Device         Display backlight
   2.67 W      0.0 pkts/s                Device         Network interface: wlan0 (iwlwifi)
   1.34 W    100.0%                      Device         USB device: Integrated Camera (Chicony Ele
   957 mW      4.2 ms/s      43.4        Process        /usr/bin/pulseaudio --start
   635 mW    154.3 ms/s     1229.7       Process        /usr/bin/enlightenment

----------------------------------------------------------------------------

Separately, it reports this:
1.25 W 100.0% Device USB device: Integrated Camera (Chicony Electronics Co., Ltd.)

It's on a thinkpad T530. I haven't found a way to stop that. I've unloaded the uvcvideo driver, but generally haven't found anything else I can do.

If you have any ideas, it would be greatly appreciated.

Thanks,
Marc

Signature · 4 lines
"A mouse is a device used to point at the xterm you want to type in" - A.S.R.
Microsoft is to operating systems ....
                                       .... what McDonalds is to gourmet cooking
Home page: http://marc.merlins.org/                         | PGP 1024R/763BE901
#2 lore raw
Quoted 21 lines · Srinivas Pandruvada

Did anybody observed this issue?

-------- Original Message --------

Subject: powertop 2.4 questions
Date: Tue, 17 Sep 2013 10:14:49 -0700
From: Marc MERLIN [1]<marc(a)merlins.org>
To: [2]srinivas.pandruvada(a)linux.intel.com

Hi Srinivas,

As discussed, I have a couple of powertop questions, thanks for passing them on.
I did try the mailing list:
Date: Fri, 2 Aug 2013 10:27:38 -0700
From: Marc MERLIN [3]<marc_powertop(a)merlins.org>
To: [4]powertop(a)ml01.01.org

but I never heard anything back. Is the list mostly dead, or is there another list?

Quoted 6 lines

So, I got powertop 2.4 from [5]https://01.org/powertop/downloads/2013/powertop-v2.4

Like I showed you on my laptop, when I go left and right with my arrows, I'm on the Overview screen, and I can't move to Idle stats or Freq stats like I could in older powertops:

in order to move between tabs use TAB button.

	-ss
Quoted 44 lines

----------------------------------------------------------------------------
PowerTOP 2.4 Overview Idle stats Frequency stats Device stats Tunables

Summary: 1862.8 wakeups/second, 5.9 GPU ops/seconds, 0.0 VFS ops/sec and 26.5% CPU use

Power est. Usage Events/s Category Description

   3.30 W      9.8%                      Device         Display backlight
   2.67 W      0.0 pkts/s                Device         Network interface: wlan0 (iwlwifi)
   1.34 W    100.0%                      Device         USB device: Integrated Camera (Chicony Ele
   957 mW      4.2 ms/s      43.4        Process        /usr/bin/pulseaudio --start
   635 mW    154.3 ms/s     1229.7       Process        /usr/bin/enlightenment

----------------------------------------------------------------------------

Separately, it reports this:
1.25 W 100.0% Device USB device: Integrated Camera (Chicony Electronics Co., Ltd.)

It's on a thinkpad T530. I haven't found a way to stop that. I've unloaded the uvcvideo driver, but generally haven't found anything else I can do.

If you have any ideas, it would be greatly appreciated.

Thanks,
Marc
--
"A mouse is a device used to point at the xterm you want to type in" - A.S.R. Microsoft is to operating systems ....
.... what McDonalds is to gourmet cooking
Home page: [6]http://marc.merlins.org/ | PGP 1024R/763BE901

References

Visible links
1. mailto:marc(a)merlins.org
2. mailto:srinivas.pandruvada(a)linux.intel.com
3. mailto:marc_powertop(a)merlins.org
4. mailto:powertop(a)ml01.01.org
5. https://01.org/powertop/downloads/2013/powertop-v2.4
6. http://marc.merlins.org/

_______________________________________________
PowerTop mailing list
PowerTop(a)lists.01.org
https://lists.01.org/mailman/listinfo/powertop

#3 lore raw
Quoted 8 lines · Sergey Senozhatsky
Quoted 6 lines

So, I got powertop 2.4 from [5]https://01.org/powertop/downloads/2013/powertop-v2.4

Like I showed you on my laptop, when I go left and right with my arrows, I'm on the Overview screen, and I can't move to Idle stats or Freq stats like I could in older powertops:

in order to move between tabs use TAB button.

That works indeed, I didn't realize it changed.

Thanks,
Marc

Signature · 4 lines
"A mouse is a device used to point at the xterm you want to type in" - A.S.R.
Microsoft is to operating systems ....
                                      .... what McDonalds is to gourmet cooking
Home page: http://marc.merlins.org/                         | PGP 1024R/763BE901
#4 lore raw
Quoted 11 lines · Marc MERLIN
Quoted 8 lines · Sergey Senozhatsky
Quoted 6 lines

So, I got powertop 2.4 from [5]https://01.org/powertop/downloads/2013/powertop-v2.4

Like I showed you on my laptop, when I go left and right with my arrows, I'm on the Overview screen, and I can't move to Idle stats or Freq stats like I could in older powertops:

in order to move between tabs use TAB button.

That works indeed, I didn't realize it changed.

I think Chris had to do that since he implemented scrollable ncurses windows, and you need up/down/left/right to move the viewport around. It's been a while that this code was in and the announcement went out... sadly it's hard to get distros to pick up details like that.

Auke

#5 lore raw
Quoted 9 lines · Auke-jan H
Quoted 8 lines · Marc MERLIN
Quoted 7 lines · Sergey Senozhatsky
Quoted 6 lines

So, I got powertop 2.4 from [5]https://01.org/powertop/downloads/2013/powertop-v2.4

Like I showed you on my laptop, when I go left and right with my arrows, I'm on the Overview screen, and I can't move to Idle stats or Freq stats like I could in older powertops:

Quoted 8 lines
Quoted 3 lines
Quoted 1 line

in order to move between tabs use TAB button.

That works indeed, I didn't realize it changed.

I think Chris had to do that since he implemented scrollable ncurses windows, and you need up/down/left/right to move the viewport around. It's been a while that this code was in and the announcement went out... sadly it's hard to get distros to pick up details like that.

No worries at all, it happens :)

By the way, my more nagging question was, how can I stop the built in camera in my T530 from taking so much power? (I'm sure the number is wrong, but still)

The battery reports a discharge rate of 18.4 W The estimated remaining time is 4 hours, 18 minutes

Summary: 657.6 wakeups/second, 28.4 GPU ops/seconds, 0.0 VFS ops/sec and 9.3% CPU use

Power est.  Usage       Events/s   Category       Description
  12.2 W    100.0%                 Device         USB device: Integrated Camera (Chicony Electronics Co., Ltd.)
  997 mW     60.0%                 Device         Display backlight
 76.1 mW     34.9 µs/s      34.8   Process        [rcu_preempt]
 23.1 mW      1.5 ms/s      16.5   Process        xfce4-terminal -T window11 --role=window11
 9.20 mW     59.0 ms/s     347.4   Process        /usr/bin/enlightenment

Note that tunables says:
Good Autosuspend for USB device Integrated Camera [Chicony Electronics Co., Ltd.]

Kernel 3.10.6.

Any ideas?

Thanks,
Marc

Signature · 4 lines
"A mouse is a device used to point at the xterm you want to type in" - A.S.R.
Microsoft is to operating systems ....
                                      .... what McDonalds is to gourmet cooking
Home page: http://marc.merlins.org/                         | PGP 1024R/763BE901
#6 lore raw
Quoted 2 lines · Marc MERLIN

By the way, my more nagging question was, how can I stop the built in camera in my T530 from taking so much power? (I'm sure the number is wrong, but still)

How about unloading/blacklisting its driver?

Quoted 22 lines

The battery reports a discharge rate of 18.4 W The estimated remaining time is 4 hours, 18 minutes

Summary: 657.6 wakeups/second, 28.4 GPU ops/seconds, 0.0 VFS ops/sec and 9.3% CPU use

Power est.  Usage       Events/s   Category       Description
  12.2 W    100.0%                 Device         USB device: Integrated Camera (Chicony Electronics Co., Ltd.)
  997 mW     60.0%                 Device         Display backlight
 76.1 mW     34.9 µs/s      34.8   Process        [rcu_preempt]
 23.1 mW      1.5 ms/s      16.5   Process        xfce4-terminal -T window11 --role=window11
 9.20 mW     59.0 ms/s     347.4   Process        /usr/bin/enlightenment

Note that tunables says:
Good Autosuspend for USB device Integrated Camera [Chicony Electronics Co., Ltd.]

Kernel 3.10.6.

Any ideas?

Thanks,
Marc

#7 lore raw
Quoted 5 lines · Andika Triwidada
Quoted 2 lines · Marc MERLIN

By the way, my more nagging question was, how can I stop the built in camera in my T530 from taking so much power? (I'm sure the number is wrong, but still)

How about unloading/blacklisting its driver?

That didn't help.

It might work if I blacklist the driver and never use it after boot, but that's not super compatible with google talk/hangouts.

That said, if I can't get the driver/device to behave, I might do that.

Marc

Signature · 4 lines
"A mouse is a device used to point at the xterm you want to type in" - A.S.R.
Microsoft is to operating systems ....
                                      .... what McDonalds is to gourmet cooking
Home page: http://marc.merlins.org/                         | PGP 1024R/763BE901
#8 lore raw

Re: [Powertop] USB devices get wrong power use values

So, I asked on the linux-usb list, and one thing I quickly found out is that the Watt value given by powertop 2.4 is way off for USB devices:

Alan Stern wrote the following:

Do you have a bug on powertop 2.4 mis-calculating USB power use, both when power is plugged in and when it's not?

Thanks,
Marc

Quoted 31 lines · Alan Stern
Quoted 16 lines
Quoted 7 lines
gandalfthegreat:/sys/bus/usb/devices/3-1.6/power# grep . *
active_duration:61227648
async:enabled
autosuspend:2
autosuspend_delay_ms:2000
connected_duration:66830880
control:auto
Quoted 8 lines
level:auto
persist:1
runtime_active_kids:0
runtime_active_time:18870052
runtime_enabled:enabled
runtime_status:active
runtime_suspended_time:5324088
runtime_usage:0
Quoted 1 line

This all looks correct.

Since then, I've confirmed that I don't have the problem some time after reboot. It may be that the device doesn't seem to sleep well after I've used it once.

What's interesting, is that I see this when power is plugged in:

Power est.  Events/s    Category       Description
  8.18 W    100.0%      Device         USB device: Yubico Yubikey II (Yubico)
  8.13 W    100.0%      Device         USB device: Integrated Camera (Chicony Electronics Co., Ltd.)

Once I go to batteries, I see this:
Summary: 760.1 wakeups/second, 718.9 GPU ops/seconds, 0.0 VFS ops/sec and 6.9% CPU use

Quoted 6 lines

Power est. Usage Events/s Category Description

  8.32 W    100.0%                      Device         USB device: Yubico Yubikey II (Yubico)
  2.52 W     73.3%                      Device         Display backlight

Somehow I know that my Yubikey isn't using 8W, so powertop numbers need to be taken with a grain of salt.

I don't know where powertop gets its numbers from. Perhaps it uses the value reported by the device (bMaxPower). That value is only a maximum; it doesn't change to reflect the actual usage.

Signature · 4 lines
"A mouse is a device used to point at the xterm you want to type in" - A.S.R.
Microsoft is to operating systems ....
                                      .... what McDonalds is to gourmet cooking
Home page: http://marc.merlins.org/
#9 lore raw

Re: [Powertop] USB devices get wrong power use values

Quoted 7 lines · Marc MERLIN

So, I asked on the linux-usb list, and one thing I quickly found out is that the Watt value given by powertop 2.4 is way off for USB devices:

Alan Stern wrote the following:

Do you have a bug on powertop 2.4 mis-calculating USB power use, both when power is plugged in and when it's not?

powertop uses

/sys/bus/usb/devices/%s/power/active_duration
and

	/sys/bus/usb/devices/%s/power/connected_duration

	-ss
Quoted 52 lines

Thanks,
Marc

Quoted 31 lines · Alan Stern
Quoted 16 lines
Quoted 7 lines
gandalfthegreat:/sys/bus/usb/devices/3-1.6/power# grep . *
active_duration:61227648
async:enabled
autosuspend:2
autosuspend_delay_ms:2000
connected_duration:66830880
control:auto
Quoted 8 lines
level:auto
persist:1
runtime_active_kids:0
runtime_active_time:18870052
runtime_enabled:enabled
runtime_status:active
runtime_suspended_time:5324088
runtime_usage:0
Quoted 1 line

This all looks correct.

Since then, I've confirmed that I don't have the problem some time after reboot. It may be that the device doesn't seem to sleep well after I've used it once.

What's interesting, is that I see this when power is plugged in:

Power est.  Events/s    Category       Description
  8.18 W    100.0%      Device         USB device: Yubico Yubikey II (Yubico)
  8.13 W    100.0%      Device         USB device: Integrated Camera (Chicony Electronics Co., Ltd.)

Once I go to batteries, I see this:
Summary: 760.1 wakeups/second, 718.9 GPU ops/seconds, 0.0 VFS ops/sec and 6.9% CPU use

Quoted 6 lines

Power est. Usage Events/s Category Description

  8.32 W    100.0%                      Device         USB device: Yubico Yubikey II (Yubico)
  2.52 W     73.3%                      Device         Display backlight

Somehow I know that my Yubikey isn't using 8W, so powertop numbers need to be taken with a grain of salt.

I don't know where powertop gets its numbers from. Perhaps it uses the value reported by the device (bMaxPower). That value is only a maximum; it doesn't change to reflect the actual usage.

Signature · 4 lines
"A mouse is a device used to point at the xterm you want to type in" - A.S.R.
Microsoft is to operating systems ....
                                      .... what McDonalds is to gourmet cooking
Home page: http://marc.merlins.org/
#10 lore raw

Re: [Powertop] USB devices get wrong power use values

In reply to Marc MERLIN
Quoted 2 lines · Marc MERLIN

So, I asked on the linux-usb list, and one thing I quickly found out is that the Watt value given by powertop 2.4 is way off for USB devices:

what makes you think the value is off?

Quoted 3 lines
Quoted 3 lines

Power est. Events/s Category Description

   8.18 W    100.0%      Device         USB device: Yubico Yubikey II (Yubico)
   8.13 W    100.0%      Device         USB device: Integrated Camera (Chicony Electronics Co., Ltd.)

having a USB device active also generally makes the CPU/etc use much more power, which Powertop "charges" to the USB device in question.

8 Watts sounds entirely reasonable for that to me...

#11 lore raw

Re: [Powertop] USB devices get wrong power use values

Quoted 6 lines · Arjan van de Ven
Quoted 2 lines · Marc MERLIN

So, I asked on the linux-usb list, and one thing I quickly found out is that the Watt value given by powertop 2.4 is way off for USB devices:

what makes you think the value is off?

Quoted 8 lines
Quoted 3 lines
Quoted 3 lines
Power est.  Events/s    Category       Description
  8.18 W    100.0%      Device         USB device: Yubico Yubikey II (Yubico)
  8.13 W    100.0%      Device         USB device: Integrated Camera (Chicony Electronics Co., Ltd.)

having a USB device active also generally makes the CPU/etc use much more power, which Powertop "charges" to the USB device in question.

8 Watts sounds entirely reasonable for that to me...

Aah, if the CPU gets involved, then yes, it's a bit more possible. So, a simple USB keyboard that's unused can keep one core awake and burn 8 watts if something else goes wrong in the kernel to cause that?

Thanks,
Marc

Signature · 4 lines
"A mouse is a device used to point at the xterm you want to type in" - A.S.R.
Microsoft is to operating systems ....
                                      .... what McDonalds is to gourmet cooking
Home page: http://marc.merlins.org/                         | PGP 1024R/763BE901
#12 lore raw

Re: [Powertop] USB devices get wrong power use values

Quoted 8 lines · Marc MERLIN
Quoted 4 lines

having a USB device active also generally makes the CPU/etc use much more power, which Powertop "charges" to the USB device in question.

8 Watts sounds entirely reasonable for that to me...

Aah, if the CPU gets involved, then yes, it's a bit more possible. So, a simple USB keyboard that's unused can keep one core awake and burn 8 watts if something else goes wrong in the kernel to cause that?

a bad USB keyboard can keep the processor out of deep package C states.. not a lot the software can do about that...
but yet it can be THAT much power delta.

(we've seen for example on some servers that a cheap keyboard makes > 15 Watts difference, but measured at the wall socket, so after the power supply/etc)

#13 lore raw

Re: [Powertop] USB devices get wrong power use values

Quoted 11 lines · Arjan van de Ven
Quoted 8 lines · Marc MERLIN
Quoted 4 lines

having a USB device active also generally makes the CPU/etc use much more power, which Powertop "charges" to the USB device in question.

8 Watts sounds entirely reasonable for that to me...

Aah, if the CPU gets involved, then yes, it's a bit more possible. So, a simple USB keyboard that's unused can keep one core awake and burn 8 watts if something else goes wrong in the kernel to cause that?

Quoted 6 lines

a bad USB keyboard can keep the processor out of deep package C states.. not a lot the software can do about that...
but yet it can be THAT much power delta.

(we've seen for example on some servers that a cheap keyboard makes > 15 Watts difference, but measured at the wall socket, so after the power supply/etc)

So note that it's actually a very small USB widget that behaves as a keyboard (it's an OTP token).
I've only had that OTP token show as 7W once, and it was suspicious that it was at the exact same time as my built in camera.

So from what you're staying, you're pretty sure that the measuring code was correct and that somehow the USB system was wedged or that power management suspend failed in a way that both devices were taking 14W together, more than what the entire laptop uses when on batteries with CPUs mostly asleep?

Marc

Signature · 4 lines
"A mouse is a device used to point at the xterm you want to type in" - A.S.R.
Microsoft is to operating systems ....
                                      .... what McDonalds is to gourmet cooking
Home page: http://marc.merlins.org/                         | PGP 1024R/763BE901
#14 lore raw

Re: [Powertop] USB devices get wrong power use values

Quoted 11 lines

So note that it's actually a very small USB widget that behaves as a keyboard (it's an OTP token).
I've only had that OTP token show as 7W once, and it was suspicious that it was at the exact same time as my built in camera.

So from what you're staying, you're pretty sure that the measuring code was correct and that somehow the USB system was wedged or that power management suspend failed in a way that both devices were taking 14W together, more than what the entire laptop uses when on batteries with CPUs mostly asleep?

well powertop cannot measure, only model these things
if you go WAAAY outside the current model (by adding devices never seen before) the accuracy will go up over time, but initially might be off by a bit.

#15 lore raw

Re: [Powertop] USB devices get wrong power use values

In reply to Marc MERLIN
Quoted 11 lines · Marc MERLIN
Quoted 10 lines · Arjan van de Ven
Quoted 2 lines · Marc MERLIN

So, I asked on the linux-usb list, and one thing I quickly found out is that the Watt value given by powertop 2.4 is way off for USB devices:

what makes you think the value is off?

Quoted 3 lines
Quoted 3 lines
Power est.  Events/s    Category       Description
  8.18 W    100.0%      Device         USB device: Yubico Yubikey II (Yubico)
  8.13 W    100.0%      Device         USB device: Integrated Camera (Chicony Electronics Co., Ltd.)
Quoted 8 lines
Quoted 4 lines

having a USB device active also generally makes the CPU/etc use much more power, which Powertop "charges" to the USB device in question.

8 Watts sounds entirely reasonable for that to me...

Aah, if the CPU gets involved, then yes, it's a bit more possible. So, a simple USB keyboard that's unused can keep one core awake and burn 8 watts if something else goes wrong in the kernel to cause that?

So, I just upgraded to 3.11.5, and see things like this below. Can alsa sound really take 10W when I'm batteries?
Let me put it another way, it just cannot be correct. Full power use is 15W and if you removed 10W for audio (I'm sure that's wrong) and 3W for wifi (that may be correct) it means my quad core laptop is running at 2W with the screen on?
Not possible at all.

So there has to be a bug in powertop 2.4 USB device power calculation.

For what it's worth, I got the data below right after running powertop --calibrate and letting it go through a full cycle.

----------------------------------------------------------------------------
The battery reports a discharge rate of 15.1 W The estimated remaining time is 4 hours, 53 minutes

Summary: 572.4 wakeups/second, 18.3 GPU ops/seconds, 0.0 VFS ops/sec and 8.3% CPU use

Power est. Usage Events/s Category Description

  10.5 W    100.0%                      Device         Audio codec alsa:hwC0D0: thinkpad (Realtek)
  3.10 W      7.0 pkts/s                Device         Network interface: wlan0 (iwlwifi)
  772 mW     25.1 ms/s     208.4        Process        /usr/bin/enlightenment
 13.4 mW      1.2 ms/s       8.5        Process        xfce4-terminal -T window10 --role=window10 --tab

(...)
----------------------------------------------------------------------------

Calibrate results if that helps:

gandalfthegreat:~# powertop --calibrate
Loaded 750 prior measurements
RAPL device for cpu 0
RAPL device for cpu 0
RAPL device for cpu 0
Starting PowerTOP power estimate calibration 
Calibrating idle
Calibrating: disk usage 
Calibrating backlight
.... device /sys/class/backlight/intel_backlight/brightness 
.... device /sys/class/backlight/acpi_video0/brightness 
Calibrating idle
Calibrating: CPU usage on 1 threads
Calibrating: CPU usage on 4 threads
Calibrating: CPU wakeup power consumption
Calibrating: CPU wakeup power consumption
Calibrating: CPU wakeup power consumption
Calibrating USB devices
.... device /sys/bus/usb/devices/3-1/power/control 
.... device /sys/bus/usb/devices/4-1/power/control 
.... device /sys/bus/usb/devices/usb1/power/control 
.... device /sys/bus/usb/devices/usb2/power/control 
.... device /sys/bus/usb/devices/usb3/power/control 
.... device /sys/bus/usb/devices/usb4/power/control 
.... device /sys/bus/usb/devices/3-1.2/power/control 
.... device /sys/bus/usb/devices/3-1.6/power/control 
Calibrating radio devices
.... device /sys/class/rfkill/rfkill0/soft 
.... device /sys/class/rfkill/rfkill1/soft 
.... device /sys/class/rfkill/rfkill0/soft 
.... device /sys/class/rfkill/rfkill1/soft 
Finishing PowerTOP power estimate calibration 
Parameters after calibration:

Parameter state
----------------------------------
Value Name
2.23 alsa-codec-power (2)
0.37 backlight (3)
3.51 backlight-boost-100 (4)
2.52 backlight-boost-40 (5)
6.65 backlight-boost-80 (6)
0.00 backlight-power (7)
0.21 base power (8)
0.00 cpu-consumption (9)
0.00 cpu-wakeups (10)
0.00 disk-operations (11)
0.00 disk-operations-hard (12)
0.00 eth0-link-100 (13)
10.93 eth0-link-1000 (14)
0.00 eth0-link-high (15)
0.00 eth0-packets (16)
0.00 eth0-powerunsave (17)
0.00 eth0-up (18)
0.20 gpu-operations (19)
0.00 radio:hci0 (20)
0.00 radio:phy0 (21)
0.31 radio:tpacpi_bluetooth_sw (22)
0.00 runtime-0000:00:00.0 (23)
0.00 runtime-0000:00:02.0 (24)
0.00 runtime-0000:00:14.0 (25)
0.00 runtime-0000:00:16.0 (26)
0.00 runtime-0000:00:16.3 (27)
0.00 runtime-0000:00:19.0 (28)
0.00 runtime-0000:00:1a.0 (29)
0.00 runtime-0000:00:1b.0 (30)
0.00 runtime-0000:00:1c.0 (31)
0.00 runtime-0000:00:1c.1 (32)
0.00 runtime-0000:00:1c.2 (33)
0.00 runtime-0000:00:1d.0 (34)
0.00 runtime-0000:00:1f.0 (35)
0.00 runtime-0000:00:1f.2 (36)
0.00 runtime-0000:00:1f.3 (37)
0.00 runtime-0000:02:00.0 (38)
0.00 runtime-0000:03:00.0 (39)
0.00 thinkpad-fan (40)
0.00 thinkpad-fan-cub (41)
0.00 thinkpad-fan-sqr (42)
0.00 thinkpad-light (43)
0.00 usb-device-0403-6001 (44)
0.00 usb-device-04e8-6860 (45)
0.00 usb-device-04e8-6864 (46)
2.58 usb-device-04f2-b2ea (47)
0.00 usb-device-058f-6387 (48)
0.00 usb-device-091e-0003 (49)
1.34 usb-device-0a5c-21e6 (50)
9.82 usb-device-1050-0010 (51)
0.00 usb-device-18d1-4ee2 (52)
0.00 usb-device-18d1-4ee4 (53)
0.00 usb-device-1d6b-0002 (54)
0.00 usb-device-1d6b-0003 (55)
0.00 usb-device-8087-0024 (56)
0.00 usb0-link-100 (57)
0.00 usb0-link-1000 (58)
0.00 usb0-link-high (59)
0.00 usb0-packets (60)
0.00 usb0-powerunsave (61)
0.00 usb0-up (62)
0.00 vboxnet0-link-100 (63)
0.00 vboxnet0-link-1000 (64)
0.00 vboxnet0-link-high (65)
0.00 vboxnet0-packets (66)
0.00 vboxnet0-powerunsave (67)
0.00 vboxnet0-up (68)
0.00 wlan0-link-100 (69)
0.00 wlan0-link-1000 (70)
0.00 wlan0-link-high (71)
0.00 wlan0-packets (72)
1.64 wlan0-powerunsave (73)
0.00 wlan0-up (74)
0.00 xwakes (75)

Score:    2.6  (104691.5)
Guess:   13.2
Actual:  13.6

----------------------------------

Signature · 4 lines
"A mouse is a device used to point at the xterm you want to type in" - A.S.R.
Microsoft is to operating systems ....
                                      .... what McDonalds is to gourmet cooking
Home page: http://marc.merlins.org/  
#16 lore raw

Re: [Powertop] USB devices get wrong power use values

Quoted 39 lines · Marc MERLIN
Quoted 11 lines · Marc MERLIN
Quoted 10 lines · Arjan van de Ven
Quoted 2 lines · Marc MERLIN

So, I asked on the linux-usb list, and one thing I quickly found out is that the Watt value given by powertop 2.4 is way off for USB devices:

what makes you think the value is off?

Quoted 3 lines
Quoted 3 lines
Power est.  Events/s    Category       Description
  8.18 W    100.0%      Device         USB device: Yubico Yubikey II (Yubico)
  8.13 W    100.0%      Device         USB device: Integrated Camera (Chicony Electronics Co., Ltd.)
Quoted 8 lines
Quoted 4 lines

having a USB device active also generally makes the CPU/etc use much more power, which Powertop "charges" to the USB device in question.

8 Watts sounds entirely reasonable for that to me...

Aah, if the CPU gets involved, then yes, it's a bit more possible. So, a simple USB keyboard that's unused can keep one core awake and burn 8 watts if something else goes wrong in the kernel to cause that?

So, I just upgraded to 3.11.5, and see things like this below. Can alsa sound really take 10W when I'm batteries?
Let me put it another way, it just cannot be correct. Full power use is 15W and if you removed 10W for audio (I'm sure that's wrong) and 3W for wifi (that may be correct) it means my quad core laptop is running at 2W with the screen on?
Not possible at all.

So there has to be a bug in powertop 2.4 USB device power calculation.

For what it's worth, I got the data below right after running powertop --calibrate and letting it go through a full cycle.

----------------------------------------------------------------------------
The battery reports a discharge rate of 15.1 W The estimated remaining time is 4 hours, 53 minutes

Summary: 572.4 wakeups/second, 18.3 GPU ops/seconds, 0.0 VFS ops/sec and 8.3% CPU use

Quoted 7 lines

Power est. Usage Events/s Category Description

  10.5 W    100.0%                      Device         Audio codec alsa:hwC0D0: thinkpad (Realtek)
  3.10 W      7.0 pkts/s                Device         Network interface: wlan0 (iwlwifi)
  772 mW     25.1 ms/s     208.4        Process        /usr/bin/enlightenment
 13.4 mW      1.2 ms/s       8.5        Process        xfce4-terminal -T window10 --role=window10 --tab

(...)
----------------------------------------------------------------------------

Just after I wrote this, I'm now seeing my yubikey back to 10W when it was alsa holding the slot earlier.

Quoted 1 line

----------------------------------------------------------------------------

The battery reports a discharge rate of 21.3 W The estimated remaining time is 3 hours, 0 minutes

Summary: 2685.1 wakeups/second, 149.8 GPU ops/seconds, 0.0 VFS ops/sec and 31.2% CPU use

Power est. Usage Events/s Category Description

  10.4 W    100.0%                      Device         USB device: Yubico Yubikey II (Yubico)
  5.50 W     13.0%                      Device         Display backlight
  1.51 W     17.4 pkts/s                Device         Network interface: wlan0 (iwlwifi)
  566 mW     85.8 ms/s     1520.4       Process        /usr/bin/enlightenment
  109 mW    100.0%                      Device         Audio codec alsa:hwC0D0: thinkpad (Realtek)
 43.2 mW      5.2 ms/s      72.9        Process        xfce4-terminal -T window5 --role=window5
 25.9 mW      0.8 ms/s      14.8        Process        xfce4-terminal -T window9 --role=window9 --tab
Quoted 1 line

----------------------------------------------------------------------------

I hope this is useful.

Marc

Signature · 4 lines
"A mouse is a device used to point at the xterm you want to type in" - A.S.R.
Microsoft is to operating systems ....
                                      .... what McDonalds is to gourmet cooking
Home page: http://marc.merlins.org/  
#17 lore raw
In reply to Kok
Quoted 14 lines · On Wed, Sep 18, 2013 at 12:29 PM, Marc MERLIN…
Quoted 10 lines · Sergey Senozhatsky
Quoted 8 lines
Quoted 6 lines

So, I got powertop 2.4 from [5]https://01.org/powertop/downloads/2013/powertop-v2.4

Like I showed you on my laptop, when I go left and right with my
arrows, I'm on the Overview screen, and I can't move to Idle stats or Freq stats like I could in older powertops:

in order to move between tabs use TAB button.

Quoted 7 lines
Quoted 1 line

That works indeed, I didn't realize it changed.

I think Chris had to do that since he implemented scrollable ncurses windows, and you need up/down/left/right to move the viewport around. It's been a while that this code was in and the announcement went out... sadly it's hard to get distros to pick up details like that.

Auke

Yes it's been that way for a while now.

#18 lore raw
In reply to Marc MERLIN
Quoted 11 lines · Marc MERLIN
Quoted 8 lines · Sergey Senozhatsky
Quoted 6 lines

So, I got powertop 2.4 from [5]https://01.org/powertop/downloads/2013/powertop-v2.4

Like I showed you on my laptop, when I go left and right with my arrows, I'm on the Overview screen, and I can't move to Idle stats or Freq stats like I could in older powertops:

in order to move between tabs use TAB button.

That works indeed, I didn't realize it changed.

---
Tue Sep 11 10:23:26 2012 -0700
PowerTOP UI navigation enhancement(v3).

"Arrow Keys" now scroll the tab windows
"Page up/down" scroll tab windows up and down "TAB" cycles the next window tab
"SHIFT+TAB" cycles the previous window tab "ENTER" toggles tunables
"SPACE BAR" toggles tunables
"r KEY" refresh results and resets view of tab window.
---

it was in 2.2 release. I think the problem is that there was no 2.2 release annoucement and that change went unmentioned, so one year later we still sometimes see such questions.

	-ss
Quoted 8 lines

Thanks,
Marc

Signature · 4 lines
"A mouse is a device used to point at the xterm you want to type in" - A.S.R.
Microsoft is to operating systems ....
                                      .... what McDonalds is to gourmet cooking
Home page: http://marc.merlins.org/                         | PGP 1024R/763BE901