Openpowerlink: new package
A message that is not in the archive (sent off-list or not yet received): [email protected]
PATCH 1/1 Openpowerlink: new package
--- package/Config.in | 1 + package/openpowerlink/Config.in | 92 +++++++++++++++++++++ .../openpowerlink-FIX-demo_mn_qt.patch | 27 +++++++ package/openpowerlink/openpowerlink.mk | 93 ++++++++++++++++++++++ 4 files changed, 213 insertions(+) create mode 100644 package/openpowerlink/Config.in create mode 100644 package/openpowerlink/openpowerlink-FIX-demo_mn_qt.patch create mode 100644 package/openpowerlink/openpowerlink.mk
package/Config.in +1 -0
@@ -912,6 +912,7 @@ endmenu menu "Real-Time" source "package/xenomai/Config.in" source "package/rtai/Config.in" +source "package/openpowerlink/Config.in" endmenu menu "Shell and utilities"
package/openpowerlink/Config.in new file +92 -0
92 lines not on this page · raw message
package/openpowerlink/openpowerlink-FIX-demo_mn_qt.patch new file +27 -0
@@ -0,0 +1,27 @@ +From 8658075bd7c49a7481e8f6d0d7a13b0651e1dfd7 Mon Sep 17 00:00:00 2001 +From: Romain Naour <[email protected]> +Date: Wed, 18 Sep 2013 23:33:04 +0200 +Subject: [PATCH 1/1] [FIX] demo_mn_qt: add EplDebug.c in demo_sources list + +demo_mn_qt use EplGetEmergErrCodeStr() + +Signed-off-by: Romain Naour <[email protected]> +--- + Examples/X86/Generic/demo_mn_qt/CMakeLists.txt | 1 + + 1 file changed, 1 insertion(+) + +diff --git a/Examples/X86/Generic/demo_mn_qt/CMakeLists.txt b/Examples/X86/Generic/demo_mn_qt/CMakeLists.txt +index 9db2f7f..48ae9eb 100644 +--- a/Examples/X86/Generic/demo_mn_qt/CMakeLists.txt ++++ b/Examples/X86/Generic/demo_mn_qt/CMakeLists.txt +@@ -78,6 +78,7 @@ SET(DEMO_SOURCES src/EplApi.cpp + src/MainWindow.cpp + src/NodeState.cpp + ${POWERLINK_SOURCE_DIR}/ObjDicts/${OBJDICT}/EplApiProcessImageSetup.c ++ ${POWERLINK_SOURCE_DIR}/EplStack/EplDebug.c + ) + + # The TRACE macros need trace.c on the Windows platform +-- +1.8.4 +
package/openpowerlink/openpowerlink.mk new file +93 -0
93 lines not on this page · raw message
Signature · 1 line
1.8.4
PATCH 1/1 Openpowerlink: new package
Hi Romain,
Thanks for contributing! A few comments below.
Op 21-sep.-2013 02:48 schreef "Romain Naour" <[email protected]> het volgende:
Quoted 6 lines
Signed-off-by Romain Naour <[email protected]>--- package/Config.in | 1 + package/openpowerlink/Config.in | 92
+++++++++++++++++++++
Quoted 2 lines
.../openpowerlink-FIX-demo_mn_qt.patch | 27 +++++++ package/openpowerlink/openpowerlink.mk | 93
++++++++++++++++++++++
Quoted 3 lines
4 files changed, 213 insertions(+) create mode 100644 package/openpowerlink/Config.in create mode 100644
package/openpowerlink/openpowerlink-FIX-demo_mn_qt.patch
package/Config.in endmenu · line 915
Quoted 11 lines
create mode 100644 package/openpowerlink/openpowerlink.mkpackage/Config.in +1
-0@@ -912,6 +912,7 @@ endmenu menu "Real-Time" source "package/xenomai/Config.in" source "package/rtai/Config.in" +source "package/openpowerlink/Config.in"
Is real-time the right menu for openpowerlink? The current packages in that menu provide real time capabilities, not packages you use in a real time environment. There is an other menu 'hardware handling' that at first sight seems also fitting.
Note that entries should be in alphabetical order, but apparently xenomai and rtai weren't yet.
Review
Quoted 4 lines
package/Config.in +0
-0endmenu menu "Shell and utilities"(quoted diff) +0
-0
b/package/openpowerlink/Config.in
package/openpowerlink/Config.in line 5
Quoted 10 lines
new file mode 100644
index 0000000..42a6099package/openpowerlink/Config.in new file +5
-0@@ -0,0 +1,92 @@ +comment "openpowerlink requires thread support in toolchain" + depends on !BR2_TOOLCHAIN_HAS_THREADS + +config BR2_PACKAGE_OPENPOWERLINK + bool "Openpowerlink"
We typically write such entries in all-lowercase.
package/openpowerlink/Config.in
Quoted 6 lines
package/openpowerlink/Config.in new file +6
-0+ depends on BR2_TOOLCHAIN_HAS_THREADS + depends on BR2_i386 || BR2_x86_64 + help + openPOWERLINK is an Open Source Industrial Ethernet + stack implementing the POWERLINK protocol for Managing Node + (MN, POWERLINK Master) and Controlled Node (CN, POWERLINK
Slave).
package/openpowerlink/Config.in line 13
Quoted 2 lines
package/openpowerlink/Config.in new file +2
-0+ + It is provided by SYSTEC electronic (
package/openpowerlink/Config.in line 15
Quoted 2 lines
package/openpowerlink/Config.in new file +2
-0+ B&R (http://www.br-automation.com) and + Kalycito (http://www.kalycito.com).
It's there a url specifically for this package? This should be mentioned as the last line of the entry.
package/openpowerlink/Config.in line 20
Quoted 5 lines
package/openpowerlink/Config.in new file +5
-0+ +if BR2_PACKAGE_OPENPOWERLINK + +choice + prompt "Openpowerlink mode"
Is it necessary to repeat the package name here?
package/openpowerlink/Config.in
Quoted 10 lines
package/openpowerlink/Config.in new file +10
-0+ +config BR2_PACKAGE_OPENPOWERLINK_LIBPCAP + bool "userspace stack" + select BR2_PACKAGE_LIBPCAP + +config BR2_PACKAGE_OPENPOWERLINK_KERNEL_MODULE + bool "kernel stack" + depends on BR2_LINUX_KERNEL + help + You may select BR2_PACKAGE_PCIUTILS for lscpi, and
BR2_PACKAGE_PROCPS for ps command.
package/openpowerlink/Config.in line 33
Quoted 3 lines
package/openpowerlink/Config.in new file +3
-0+ These commands are used in EplLoad and EplUndload scripts. + +endchoice
Is there more help that can be given for both options? Are there benefits/advantages on either? Or limitations in functionality?
Quoted 4 lines
package/openpowerlink/Config.in new file +4
-0+ +if BR2_PACKAGE_OPENPOWERLINK_KERNEL_MODULE + +choice
package/openpowerlink/Config.in line 47
Quoted 10 lines
package/openpowerlink/Config.in new file +10
-0+ prompt "Select Ethernet Powerlink Driver" + +config BR2_PACKAGE_OPENPOWERLINK_82573 + bool "Intel 82573" + +config BR2_PACKAGE_OPENPOWERLINK_8255x + bool "Intel 8255x" + +config BR2_PACKAGE_OPENPOWERLINK_RTL8139 + bool "Realteck RTL-8139"
This should be Realtek
Quoted 11 lines
package/openpowerlink/Config.in new file +11
-0+ +endchoice + +endif + +choice + prompt "Select MN/CN mode" + + config BR2_PACKAGE_OPENPOWERLINK_MN + bool "MN" + help
package/openpowerlink/Config.in line 68
Quoted 10 lines
package/openpowerlink/Config.in new file +10
-0+ Enable Managing Node mode + + config BR2_PACKAGE_OPENPOWERLINK_CN + bool "CN" + help + Enable Controlled Node mode + +endchoice + +# Powerlink Demos
It would make sense to group the demos under a suboption, don't you think?
Review
Quoted 25 lines
package/openpowerlink/Config.in new file +24
-0+config BR2_PACKAGE_OPENPOWERLINK_DEMO_MN_CONSOLE + bool "Console MN demo" + depends on BR2_PACKAGE_OPENPOWERLINK_MN + +config BR2_PACKAGE_OPENPOWERLINK_DEMO_MN_QT + bool "QT MN demo" + depends on BR2_PACKAGE_OPENPOWERLINK_MN + select BR2_PACKAGE_QT + select BR2_PACKAGE_QT_STL + +config BR2_PACKAGE_OPENPOWERLINK_DEMO_CN_CONSOLE + bool "Console CN demo" + depends on !BR2_PACKAGE_OPENPOWERLINK_MN + +config BR2_PACKAGE_OPENPOWERLINK_DEMO_LINUX_KERNEL + bool "Kernel demo" + depends on BR2_PACKAGE_OPENPOWERLINK_KERNEL_MODULE + +config BR2_PACKAGE_OPENPOWERLINK_DEBUG_LEVEL + string "Debug level for EPL" + help + default value: 0xEC000000L + +endif(quoted diff) +0
-0
b/package/openpowerlink/openpowerlink-FIX-demo_mn_qt.patch
Patches should be named openpowerlink-0001-description.patch, and we typically use lowercase and dashes for the description.
package/openpowerlink/openpowerlink-FIX-demo_mn_qt.patch line 4
Quoted 9 lines
new file mode 100644
index 0000000..a71298dpackage/openpowerlink/openpowerlink-FIX-demo_mn_qt.patch new file +4
-0@@ -0,0 +1,27 @@ +From 8658075bd7c49a7481e8f6d0d7a13b0651e1dfd7 Mon Sep 17 00:00:00 2001 +From: Romain Naour <[email protected]> +Date: Wed, 18 Sep 2013 23:33:04 +0200 +Subject: [PATCH 1/1] [FIX] demo_mn_qt: add EplDebug.c in demo_sources
list
package/openpowerlink/openpowerlink-FIX-demo_mn_qt.patch
Quoted 9 lines
package/openpowerlink/openpowerlink-FIX-demo_mn_qt.patch new file +9
-0+ +demo_mn_qt use EplGetEmergErrCodeStr() + +Signed-off-by: Romain Naour <[email protected]> +--- + Examples/X86/Generic/demo_mn_qt/CMakeLists.txt | 1 + + 1 file changed, 1 insertion(+) + +diff --git a/Examples/X86/Generic/demo_mn_qt/CMakeLists.txt
b/Examples/X86/Generic/demo_mn_qt/CMakeLists.txt
package/openpowerlink/openpowerlink-FIX-demo_mn_qt.patch line 23
Quoted 7 lines
package/openpowerlink/openpowerlink-FIX-demo_mn_qt.patch new file +7
-0+index 9db2f7f..48ae9eb 100644 +--- a/Examples/X86/Generic/demo_mn_qt/CMakeLists.txt ++++ b/Examples/X86/Generic/demo_mn_qt/CMakeLists.txt +@@ -78,6 +78,7 @@ SET(DEMO_SOURCES src/EplApi.cpp + src/MainWindow.cpp + src/NodeState.cpp +
${POWERLINK_SOURCE_DIR}/ObjDicts/${OBJDICT}/EplApiProcessImageSetup.c
package/openpowerlink/openpowerlink-FIX-demo_mn_qt.patch line 27
Quoted 7 lines
package/openpowerlink/openpowerlink-FIX-demo_mn_qt.patch new file +7
-0++ ${POWERLINK_SOURCE_DIR}/EplStack/EplDebug.c + ) + + # The TRACE macros need trace.c on the Windows platform +-- +1.8.4 +
Is this patch something that can be upstreamed?
Review
Quoted 1 line
(quoted diff) +0
-0
openpowerlink.mk
package/openpowerlink/openpowerlink.mk
Quoted 6 lines
new file mode 100644
index 0000000..ac28de9package/openpowerlink/openpowerlink.mk new file +0
-0@@ -0,0 +1,93 @@
+################################################################################
package/openpowerlink/openpowerlink.mk line 4
Quoted 4 lines
package/openpowerlink/openpowerlink.mk new file +3
-0+# +# openPOWERLINK +#
+################################################################################
package/openpowerlink/openpowerlink.mk
Quoted 4 lines
package/openpowerlink/openpowerlink.mk new file +4
-0+ +OPENPOWERLINK_VERSION = V1.08.3 +OPENPOWERLINK_SOURCE = openPOWERLINK-$(OPENPOWERLINK_VERSION).zip +OPENPOWERLINK_SITE =
http://downloads.sourceforge.net/project/openpowerlink/openPOWERLINK/V1.8.3
Quoted 8 lines
package/openpowerlink/openpowerlink.mk new file +8
-0+ +OPENPOWERLINK_LICENSE = BSD-2c, GPLv2 +OPENPOWERLINK_LICENSE_FILES = license.txt +OPENPOWERLINK_INSTALL_STAGING = YES + +ifeq ($(BR2_i386),y) +OPENPOWERLINK_ARCH = x86 +endif
package/openpowerlink/openpowerlink.mk
Quoted 10 lines
package/openpowerlink/openpowerlink.mk new file +10
-0+ +ifeq ($(BR2_x86_64),y) +OPENPOWERLINK_ARCH = x86_64 +endif + +OPENPOWERLINK_CONF_OPT = -DCMAKE_SYSTEM_PROCESSOR=$(OPENPOWERLINK_ARCH) +OPENPOWERLINK_CONF_OPT += -DCMAKE_BUILD_TYPE=Debug +OPENPOWERLINK_CONF_OPT += -DCMAKE_INSTALL_PREFIX=/usr/ + +OPENPOWERLINK_DEBUG_LEVEL = $(call
qstrip,$(BR2_PACKAGE_OPENPOWERLINK_DEBUG_LEVEL))
package/openpowerlink/openpowerlink.mk line 30
Quoted 3 lines
package/openpowerlink/openpowerlink.mk new file +3
-0+ +ifeq ($(OPENPOWERLINK_DEBUG_LEVEL),) +OPENPOWERLINK_CONF_OPT += -DCFG_DEBUG_LVL=0xEC000000L
What about moving this as default to Config.in, then you don't need a if-else here?
Quoted 50 lines
package/openpowerlink/openpowerlink.mk new file +50
-0+else +OPENPOWERLINK_CONF_OPT += -DCFG_DEBUG_LVL=$(OPENPOWERLINK_DEBUG_LEVEL) +endif + +ifeq ($(BR2_PACKAGE_OPENPOWERLINK_LIBPCAP),y) +# use the user space stack (libpcap) +OPENPOWERLINK_CONF_OPT += -DCFG_KERNEL_STACK=OFF +OPENPOWERLINK_DEPENDENCIES = libpcap +else +# use the kernel stack +OPENPOWERLINK_CONF_OPT += -DCFG_KERNEL_STACK=ON +OPENPOWERLINK_CONF_OPT += -DCFG_KERNEL_DIR=$(LINUX_DIR) +OPENPOWERLINK_CONF_OPT += -DCMAKE_SYSTEM_VERSION=$(LINUX_VERSION) +OPENPOWERLINK_DEPENDENCIES = linux +endif + +ifeq ($(BR2_PACKAGE_OPENPOWERLINK_82573),y) +OPENPOWERLINK_CONF_OPT += -DCFG_POWERLINK_EDRV=82573 +else ifeq ($(BR2_PACKAGE_OPENPOWERLINK_RTL8139),y) +OPENPOWERLINK_CONF_OPT += -DCFG_POWERLINK_EDRV=8139 +else ifeq ($(BR2_PACKAGE_OPENPOWERLINK_8255x),y) +OPENPOWERLINK_CONF_OPT += -DCFG_POWERLINK_EDRV=8255x +endif + +ifeq ($(BR2_PACKAGE_OPENPOWERLINK_MN),y) +OPENPOWERLINK_CONF_OPT += -DCFG_POWERLINK_MN=ON +else +OPENPOWERLINK_CONF_OPT += -DCFG_POWERLINK_MN=OFF +endif + +ifeq ($(BR2_PACKAGE_OPENPOWERLINK_DEMO_MN_CONSOLE),y) +OPENPOWERLINK_CONF_OPT += -DCFG_X86_DEMO_MN_CONSOLE=ON +else +OPENPOWERLINK_CONF_OPT += -DCFG_X86_DEMO_MN_CONSOLE=OFF +endif + +ifeq ($(BR2_PACKAGE_OPENPOWERLINK_DEMO_MN_QT),y) +OPENPOWERLINK_CONF_OPT += -DCFG_X86_DEMO_MN_QT=ON +OPENPOWERLINK_DEPENDENCIES += qt +else +OPENPOWERLINK_CONF_OPT += -DCFG_X86_DEMO_MN_QT=OFF +endif + +ifeq ($(BR2_PACKAGE_OPENPOWERLINK_DEMO_CN_CONSOLE),y) +OPENPOWERLINK_CONF_OPT += -DCFG_X86_DEMO_CN_CONSOLE=ON +else +OPENPOWERLINK_CONF_OPT += -DCFG_X86_DEMO_CN_CONSOLE=OFF +endif + +ifeq ($(BR2_PACKAGE_OPENPOWERLINK_DEMO_LINUX_KERNEL),y)
package/openpowerlink/openpowerlink.mk
Quoted 10 lines
package/openpowerlink/openpowerlink.mk new file +10
-0+OPENPOWERLINK_CONF_OPT += -DCFG_X86_DEMO_LINUX_KERNEL=ON +else +OPENPOWERLINK_CONF_OPT += -DCFG_X86_DEMO_LINUX_KERNEL=OFF +endif + +define OPENPOWERLINK_EXTRACT_CMDS + $(RM) -rf $(OPENPOWERLINK_DIR) + unzip -q -d $(BUILD_DIR)/ $(DL_DIR)/$(OPENPOWERLINK_SOURCE) + test -d $(OPENPOWERLINK_DIR) || \ + mv $(BUILD_DIR)/$(subst .zip,,$(OPENPOWERLINK_SOURCE))
$(OPENPOWERLINK_DIR)
Quoted 5 lines
package/openpowerlink/openpowerlink.mk new file +3
-1+endef + +$(eval $(cmake-package)) --1.8.4
Best regards,
Thomas
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20130921/e097f2d9/attachment-0001.html>
PATCH 1/1 Openpowerlink: new package
Dear Thomas De Schampheleire,
Quoted 8 lines · Thomas De Schampheleire
Hi Romain,
Thanks for contributing! A few comments below.
Op 21-sep.-2013 02:48 schreef "Romain Naour" <[email protected]> het volgende:
Quoted 2 lines
Quoted 9 lines
Quoted 4 lines
Signed-off-by Romain Naour <[email protected]>--- package/Config.in | 1 + package/openpowerlink/Config.in | 92+++++++++++++++++++++
Quoted 2 lines
.../openpowerlink-FIX-demo_mn_qt.patch | 27 +++++++ package/openpowerlink/openpowerlink.mk | 93++++++++++++++++++++++
Quoted 1 line
4 files changed, 213 insertions(+)
Whenever you reply to an e-mail, since a few weeks, your replies are badly line-wrapped. Would it be possible to tune your e-mail client not to do so?
Thanks a lot!
Thomas
Signature · 3 lines
Thomas Petazzoni, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com
PATCH 1/1 Openpowerlink: new package
In reply to Thomas De SchampheleireHi Thomas,
Le 21/09/2013 09:16, Thomas De Schampheleire a ?crit :
Quoted 3 lines
Hi Romain,
Thanks for contributing! A few comments below.
You're welcome.
Quoted 15 lines
Op 21-sep.-2013 02:48 schreef "Romain Naour" <romain.naour at openwide.fr <mailto:[email protected]>> het volgende:
Quoted 13 lines
Signed-off-by Romain Naour <romain.naour at openwide.fr <mailto:[email protected]>>--- package/Config.in | 1 + package/openpowerlink/Config.in | 92 +++++++++++++++++++++ .../openpowerlink-FIX-demo_mn_qt.patch | 27 +++++++ package/openpowerlink/openpowerlink.mk <http://openpowerlink.mk> | 93 ++++++++++++++++++++++ 4 files changed, 213 insertions(+) create mode 100644 package/openpowerlink/Config.in create mode 100644 package/openpowerlink/openpowerlink-FIX-demo_mn_qt.patch create mode 100644 package/openpowerlink/openpowerlink.mk <http://openpowerlink.mk>
Quoted 12 lines
package/Config.in endmenu · line 915
Quoted 9 lines
package/Config.in +1
-0@@ -912,6 +912,7 @@ endmenu menu "Real-Time" source "package/xenomai/Config.in" source "package/rtai/Config.in" +source "package/openpowerlink/Config.in"Is real-time the right menu for openpowerlink? The current packages in that menu provide real time capabilities, not packages you use in a real time environment. There is an other menu 'hardware handling' that at first sight seems also fitting.
I wasn't sure about that...
It is because openpowerlink is mainly used when you're running a preempt-rt kernel.
Quoted 2 lines
Note that entries should be in alphabetical order, but apparently xenomai and rtai weren't yet.
I will fix that.
Quoted 29 lines
Quoted 10 lines
package/Config.in +0
-0endmenu menu "Shell and utilities"package/openpowerlink/Config.in new file +0
-0package/openpowerlink/Config.in line 5
Quoted 5 lines
package/openpowerlink/Config.in new file +5
-0@@ -0,0 +1,92 @@ +comment "openpowerlink requires thread support in toolchain" + depends on !BR2_TOOLCHAIN_HAS_THREADS + +config BR2_PACKAGE_OPENPOWERLINK + bool "Openpowerlink"We typically write such entries in all-lowercase.
package/openpowerlink/Config.in line 15
Quoted 10 lines
package/openpowerlink/Config.in new file +10
-0+ depends on BR2_TOOLCHAIN_HAS_THREADS + depends on BR2_i386 || BR2_x86_64 + help + openPOWERLINK is an Open Source Industrial Ethernet + stack implementing the POWERLINK protocol for Managing Node + (MN, POWERLINK Master) and Controlled Node (CN, POWERLINK Slave). + + It is provided by SYSTEC electronic (http://www.systec-electronic.com), + B&R (http://www.br-automation.com) and + Kalycito (http://www.kalycito.com).
Quoted 1 line
It's there a url specifically for this package? This should be mentioned as the last line of the entry.
yes, the sources are available at sourceforge.
Quoted 9 lines
package/openpowerlink/Config.in line 20
Quoted 6 lines
package/openpowerlink/Config.in new file +5
-0+ +if BR2_PACKAGE_OPENPOWERLINK + +choice + prompt "Openpowerlink mode"Is it necessary to repeat the package name here?
Quoted 15 lines
package/openpowerlink/Config.in line 33
Quoted 13 lines
package/openpowerlink/Config.in new file +13
-0+ +config BR2_PACKAGE_OPENPOWERLINK_LIBPCAP + bool "userspace stack" + select BR2_PACKAGE_LIBPCAP + +config BR2_PACKAGE_OPENPOWERLINK_KERNEL_MODULE + bool "kernel stack" + depends on BR2_LINUX_KERNEL + help + You may select BR2_PACKAGE_PCIUTILS for lscpi, and BR2_PACKAGE_PROCPS for ps command. + These commands are used in EplLoad and EplUndload scripts. + +endchoiceIs there more help that can be given for both options? Are there benefits/advantages on either? Or limitations in functionality?
I will add some help from openpowerlink documentation.
Quoted 17 lines
Quoted 5 lines
package/openpowerlink/Config.in new file +4
-0+ +if BR2_PACKAGE_OPENPOWERLINK_KERNEL_MODULE + +choicepackage/openpowerlink/Config.in line 47
Quoted 10 lines
package/openpowerlink/Config.in new file +10
-0+ prompt "Select Ethernet Powerlink Driver" + +config BR2_PACKAGE_OPENPOWERLINK_82573 + bool "Intel 82573" + +config BR2_PACKAGE_OPENPOWERLINK_8255x + bool "Intel 8255x" + +config BR2_PACKAGE_OPENPOWERLINK_RTL8139 + bool "Realteck RTL-8139"This should be Realtek
thanks
Quoted 16 lines
Quoted 16 lines
package/openpowerlink/Config.in new file +15
-0+ +endchoice + +endif + +choice + prompt "Select MN/CN mode" + + config BR2_PACKAGE_OPENPOWERLINK_MN + bool "MN" + help + Enable Managing Node mode + + config BR2_PACKAGE_OPENPOWERLINK_CN + bool "CN"
Quoted 8 lines
package/openpowerlink/Config.in line 68
Quoted 6 lines
package/openpowerlink/Config.in new file +6
-0+ help + Enable Controlled Node mode + +endchoice + +# Powerlink DemosIt would make sense to group the demos under a suboption, don't you think?
Why not, ok.
Quoted 20 lines
Quoted 20 lines
package/openpowerlink/Config.in new file +19
-0+config BR2_PACKAGE_OPENPOWERLINK_DEMO_MN_CONSOLE + bool "Console MN demo" + depends on BR2_PACKAGE_OPENPOWERLINK_MN + +config BR2_PACKAGE_OPENPOWERLINK_DEMO_MN_QT + bool "QT MN demo" + depends on BR2_PACKAGE_OPENPOWERLINK_MN + select BR2_PACKAGE_QT + select BR2_PACKAGE_QT_STL + +config BR2_PACKAGE_OPENPOWERLINK_DEMO_CN_CONSOLE + bool "Console CN demo" + depends on !BR2_PACKAGE_OPENPOWERLINK_MN + +config BR2_PACKAGE_OPENPOWERLINK_DEMO_LINUX_KERNEL + bool "Kernel demo" + depends on BR2_PACKAGE_OPENPOWERLINK_KERNEL_MODULE + +config BR2_PACKAGE_OPENPOWERLINK_DEBUG_LEVEL
Quoted 8 lines
package/openpowerlink/openpowerlink-FIX-demo_mn_qt.patch
Quoted 6 lines
package/openpowerlink/Config.in new file +5
-0+ string "Debug level for EPL" + help + default value: 0xEC000000L + +endifpackage/openpowerlink/openpowerlink-FIX-demo_mn_qt.patch +0
-0Patches should be named openpowerlink-0001-description.patch, and we typically use lowercase and dashes for the description.
ok
Quoted 27 lines
Quoted 27 lines
new file mode 100644
index 0000000..a71298dpackage/openpowerlink/openpowerlink-FIX-demo_mn_qt.patch new file +21
-0@@ -0,0 +1,27 @@ +From 8658075bd7c49a7481e8f6d0d7a13b0651e1dfd7 Mon Sep 17 00:00:00 2001 +From: Romain Naour <romain.naour at openwide.fr <mailto:[email protected]>> +Date: Wed, 18 Sep 2013 23:33:04 +0200 +Subject: [PATCH 1/1] [FIX] demo_mn_qt: add EplDebug.c in demo_sources list + +demo_mn_qt use EplGetEmergErrCodeStr() + +Signed-off-by: Romain Naour <romain.naour at openwide.fr <mailto:[email protected]>> +--- + Examples/X86/Generic/demo_mn_qt/CMakeLists.txt | 1 + + 1 file changed, 1 insertion(+) + +diff --git a/Examples/X86/Generic/demo_mn_qt/CMakeLists.txt b/Examples/X86/Generic/demo_mn_qt/CMakeLists.txt +index 9db2f7f..48ae9eb 100644 +--- a/Examples/X86/Generic/demo_mn_qt/CMakeLists.txt ++++ b/Examples/X86/Generic/demo_mn_qt/CMakeLists.txt +@@ -78,6 +78,7 @@ SET(DEMO_SOURCES src/EplApi.cpp + src/MainWindow.cpp + src/NodeState.cpp + ${POWERLINK_SOURCE_DIR}/ObjDicts/${OBJDICT}/EplApiProcessImageSetup.c ++ ${POWERLINK_SOURCE_DIR}/EplStack/EplDebug.c
Quoted 8 lines
package/openpowerlink/openpowerlink-FIX-demo_mn_qt.patch line 27
Quoted 6 lines
package/openpowerlink/openpowerlink-FIX-demo_mn_qt.patch new file +6
-0+ ) + + # The TRACE macros need trace.c on the Windows platform +-- +1.8.4 +Is this patch something that can be upstreamed?
Definitely, my patches for openpowerlink are available in my sourceforge account. Openpowerlink's developers can get them for the next release.
Quoted 31 lines
Quoted 31 lines
package/openpowerlink/openpowerlink.mk <http://openpowerlink.mk> new file +24
-0@@ -0,0 +1,93 @@ +################################################################################ +# +# openPOWERLINK +# +################################################################################ + +OPENPOWERLINK_VERSION = V1.08.3 +OPENPOWERLINK_SOURCE = openPOWERLINK-$(OPENPOWERLINK_VERSION).zip +OPENPOWERLINK_SITE = http://downloads.sourceforge.net/project/openpowerlink/openPOWERLINK/V1.8.3 + +OPENPOWERLINK_LICENSE = BSD-2c, GPLv2 +OPENPOWERLINK_LICENSE_FILES = license.txt +OPENPOWERLINK_INSTALL_STAGING = YES + +ifeq ($(BR2_i386),y) +OPENPOWERLINK_ARCH = x86 +endif + +ifeq ($(BR2_x86_64),y) +OPENPOWERLINK_ARCH = x86_64 +endif + +OPENPOWERLINK_CONF_OPT = -DCMAKE_SYSTEM_PROCESSOR=$(OPENPOWERLINK_ARCH) +OPENPOWERLINK_CONF_OPT += -DCMAKE_BUILD_TYPE=Debug
Quoted 8 lines
package/openpowerlink/openpowerlink.mk <http://openpowerlink.mk> line 30
Quoted 6 lines
package/openpowerlink/openpowerlink.mk <http://openpowerlink.mk> new file +6
-0+OPENPOWERLINK_CONF_OPT += -DCMAKE_INSTALL_PREFIX=/usr/ + +OPENPOWERLINK_DEBUG_LEVEL = $(call qstrip,$(BR2_PACKAGE_OPENPOWERLINK_DEBUG_LEVEL)) + +ifeq ($(OPENPOWERLINK_DEBUG_LEVEL),) +OPENPOWERLINK_CONF_OPT += -DCFG_DEBUG_LVL=0xEC000000LWhat about moving this as default to Config.in, then you don't need a if-else here?
Ok
Quoted 61 lines
Quoted 61 lines
package/openpowerlink/openpowerlink.mk <http://openpowerlink.mk> new file +60
-0+else +OPENPOWERLINK_CONF_OPT += -DCFG_DEBUG_LVL=$(OPENPOWERLINK_DEBUG_LEVEL) +endif + +ifeq ($(BR2_PACKAGE_OPENPOWERLINK_LIBPCAP),y) +# use the user space stack (libpcap) +OPENPOWERLINK_CONF_OPT += -DCFG_KERNEL_STACK=OFF +OPENPOWERLINK_DEPENDENCIES = libpcap +else +# use the kernel stack +OPENPOWERLINK_CONF_OPT += -DCFG_KERNEL_STACK=ON +OPENPOWERLINK_CONF_OPT += -DCFG_KERNEL_DIR=$(LINUX_DIR) +OPENPOWERLINK_CONF_OPT += -DCMAKE_SYSTEM_VERSION=$(LINUX_VERSION) +OPENPOWERLINK_DEPENDENCIES = linux +endif + +ifeq ($(BR2_PACKAGE_OPENPOWERLINK_82573),y) +OPENPOWERLINK_CONF_OPT += -DCFG_POWERLINK_EDRV=82573 +else ifeq ($(BR2_PACKAGE_OPENPOWERLINK_RTL8139),y) +OPENPOWERLINK_CONF_OPT += -DCFG_POWERLINK_EDRV=8139 +else ifeq ($(BR2_PACKAGE_OPENPOWERLINK_8255x),y) +OPENPOWERLINK_CONF_OPT += -DCFG_POWERLINK_EDRV=8255x +endif + +ifeq ($(BR2_PACKAGE_OPENPOWERLINK_MN),y) +OPENPOWERLINK_CONF_OPT += -DCFG_POWERLINK_MN=ON +else +OPENPOWERLINK_CONF_OPT += -DCFG_POWERLINK_MN=OFF +endif + +ifeq ($(BR2_PACKAGE_OPENPOWERLINK_DEMO_MN_CONSOLE),y) +OPENPOWERLINK_CONF_OPT += -DCFG_X86_DEMO_MN_CONSOLE=ON +else +OPENPOWERLINK_CONF_OPT += -DCFG_X86_DEMO_MN_CONSOLE=OFF +endif + +ifeq ($(BR2_PACKAGE_OPENPOWERLINK_DEMO_MN_QT),y) +OPENPOWERLINK_CONF_OPT += -DCFG_X86_DEMO_MN_QT=ON +OPENPOWERLINK_DEPENDENCIES += qt +else +OPENPOWERLINK_CONF_OPT += -DCFG_X86_DEMO_MN_QT=OFF +endif + +ifeq ($(BR2_PACKAGE_OPENPOWERLINK_DEMO_CN_CONSOLE),y) +OPENPOWERLINK_CONF_OPT += -DCFG_X86_DEMO_CN_CONSOLE=ON +else +OPENPOWERLINK_CONF_OPT += -DCFG_X86_DEMO_CN_CONSOLE=OFF +endif + +ifeq ($(BR2_PACKAGE_OPENPOWERLINK_DEMO_LINUX_KERNEL),y) +OPENPOWERLINK_CONF_OPT += -DCFG_X86_DEMO_LINUX_KERNEL=ON +else +OPENPOWERLINK_CONF_OPT += -DCFG_X86_DEMO_LINUX_KERNEL=OFF +endif + +define OPENPOWERLINK_EXTRACT_CMDS + $(RM) -rf $(OPENPOWERLINK_DIR) + unzip -q -d $(BUILD_DIR)/ $(DL_DIR)/$(OPENPOWERLINK_SOURCE) + test -d $(OPENPOWERLINK_DIR) || \ + mv $(BUILD_DIR)/$(subst .zip,,$(OPENPOWERLINK_SOURCE)) $(OPENPOWERLINK_DIR)
Quoted 9 lines
Quoted 5 lines
package/openpowerlink/openpowerlink.mk <http://openpowerlink.mk> new file +3
-1+endef + +$(eval $(cmake-package)) --1.8.4
Best regards,
Thomas
Thank you Thomas for your review.
Best regards,
Signature · 8 lines
Romain Naour OPEN WIDE Ing?nierie - Paris 23/25, rue Daviel 75013 PARIS http://ingenierie.openwide.fr Le blog des technologies libres et embarqu?es : http://www.linuxembedded.fr
PATCH 1/1 Openpowerlink: new package
In reply to Romain NaourHi Thomas,
Op 21-sep.-2013 02:48 schreef "Romain Naour" <[email protected]> het volgende:
Quoted 6 lines
Signed-off-by Romain Naour <[email protected]>--- package/Config.in | 1 + package/openpowerlink/Config.in | 92
+++++++++++++++++++++
Quoted 2 lines
.../openpowerlink-FIX-demo_mn_qt.patch | 27 +++++++ package/openpowerlink/openpowerlink.mk | 93
++++++++++++++++++++++
Quoted 3 lines
4 files changed, 213 insertions(+) create mode 100644 package/openpowerlink/Config.in create mode 100644
package/openpowerlink/openpowerlink-FIX-demo_mn_qt.patch
Review
Quoted 15 lines
create mode 100644 package/openpowerlink/openpowerlink.mkpackage/Config.in +1
-0@@ -912,6 +912,7 @@ endmenu menu "Real-Time" source "package/xenomai/Config.in" source "package/rtai/Config.in" +source "package/openpowerlink/Config.in" endmenu menu "Shell and utilities"(quoted diff) +0
-0
b/package/openpowerlink/Config.in
Quoted 6 lines
new file mode 100644
index 0000000..42a6099package/openpowerlink/Config.in new file +1
-0@@ -0,0 +1,92 @@ +comment "openpowerlink requires thread support in toolchain"
package/openpowerlink/Config.in line 11
Quoted 10 lines
package/openpowerlink/Config.in new file +10
-0+ depends on !BR2_TOOLCHAIN_HAS_THREADS + +config BR2_PACKAGE_OPENPOWERLINK + bool "Openpowerlink" + depends on BR2_TOOLCHAIN_HAS_THREADS + depends on BR2_i386 || BR2_x86_64 + help + openPOWERLINK is an Open Source Industrial Ethernet + stack implementing the POWERLINK protocol for Managing Node + (MN, POWERLINK Master) and Controlled Node (CN, POWERLINK
Slave).
package/openpowerlink/Config.in line 13
Quoted 2 lines
package/openpowerlink/Config.in new file +2
-0+ + It is provided by SYSTEC electronic (
Quoted 7 lines
package/openpowerlink/Config.in new file +7
-0+ B&R (http://www.br-automation.com) and + Kalycito (http://www.kalycito.com). + +if BR2_PACKAGE_OPENPOWERLINK + +choice + prompt "Openpowerlink mode"
package/openpowerlink/Config.in
Quoted 10 lines
package/openpowerlink/Config.in new file +10
-0+ +config BR2_PACKAGE_OPENPOWERLINK_LIBPCAP + bool "userspace stack" + select BR2_PACKAGE_LIBPCAP + +config BR2_PACKAGE_OPENPOWERLINK_KERNEL_MODULE + bool "kernel stack" + depends on BR2_LINUX_KERNEL + help + You may select BR2_PACKAGE_PCIUTILS for lscpi, and
BR2_PACKAGE_PROCPS for ps command.
Review
Quoted 63 lines
package/openpowerlink/Config.in new file +62
-0+ These commands are used in EplLoad and EplUndload scripts. + +endchoice + +if BR2_PACKAGE_OPENPOWERLINK_KERNEL_MODULE + +choice + prompt "Select Ethernet Powerlink Driver" + +config BR2_PACKAGE_OPENPOWERLINK_82573 + bool "Intel 82573" + +config BR2_PACKAGE_OPENPOWERLINK_8255x + bool "Intel 8255x" + +config BR2_PACKAGE_OPENPOWERLINK_RTL8139 + bool "Realteck RTL-8139" + +endchoice + +endif + +choice + prompt "Select MN/CN mode" + + config BR2_PACKAGE_OPENPOWERLINK_MN + bool "MN" + help + Enable Managing Node mode + + config BR2_PACKAGE_OPENPOWERLINK_CN + bool "CN" + help + Enable Controlled Node mode + +endchoice + +# Powerlink Demos +config BR2_PACKAGE_OPENPOWERLINK_DEMO_MN_CONSOLE + bool "Console MN demo" + depends on BR2_PACKAGE_OPENPOWERLINK_MN + +config BR2_PACKAGE_OPENPOWERLINK_DEMO_MN_QT + bool "QT MN demo" + depends on BR2_PACKAGE_OPENPOWERLINK_MN + select BR2_PACKAGE_QT + select BR2_PACKAGE_QT_STL + +config BR2_PACKAGE_OPENPOWERLINK_DEMO_CN_CONSOLE + bool "Console CN demo" + depends on !BR2_PACKAGE_OPENPOWERLINK_MN + +config BR2_PACKAGE_OPENPOWERLINK_DEMO_LINUX_KERNEL + bool "Kernel demo" + depends on BR2_PACKAGE_OPENPOWERLINK_KERNEL_MODULE + +config BR2_PACKAGE_OPENPOWERLINK_DEBUG_LEVEL + string "Debug level for EPL" + help + default value: 0xEC000000L + +endif(quoted diff) +0
-0
b/package/openpowerlink/openpowerlink-FIX-demo_mn_qt.patch
package/openpowerlink/openpowerlink-FIX-demo_mn_qt.patch line 4
Quoted 9 lines
new file mode 100644
index 0000000..a71298dpackage/openpowerlink/openpowerlink-FIX-demo_mn_qt.patch new file +4
-0@@ -0,0 +1,27 @@ +From 8658075bd7c49a7481e8f6d0d7a13b0651e1dfd7 Mon Sep 17 00:00:00 2001 +From: Romain Naour <[email protected]> +Date: Wed, 18 Sep 2013 23:33:04 +0200 +Subject: [PATCH 1/1] [FIX] demo_mn_qt: add EplDebug.c in demo_sources
list
package/openpowerlink/openpowerlink-FIX-demo_mn_qt.patch
Quoted 9 lines
package/openpowerlink/openpowerlink-FIX-demo_mn_qt.patch new file +9
-0+ +demo_mn_qt use EplGetEmergErrCodeStr() + +Signed-off-by: Romain Naour <[email protected]> +--- + Examples/X86/Generic/demo_mn_qt/CMakeLists.txt | 1 + + 1 file changed, 1 insertion(+) + +diff --git a/Examples/X86/Generic/demo_mn_qt/CMakeLists.txt
b/Examples/X86/Generic/demo_mn_qt/CMakeLists.txt
package/openpowerlink/openpowerlink-FIX-demo_mn_qt.patch line 23
Quoted 7 lines
package/openpowerlink/openpowerlink-FIX-demo_mn_qt.patch new file +7
-0+index 9db2f7f..48ae9eb 100644 +--- a/Examples/X86/Generic/demo_mn_qt/CMakeLists.txt ++++ b/Examples/X86/Generic/demo_mn_qt/CMakeLists.txt +@@ -78,6 +78,7 @@ SET(DEMO_SOURCES src/EplApi.cpp + src/MainWindow.cpp + src/NodeState.cpp +
${POWERLINK_SOURCE_DIR}/ObjDicts/${OBJDICT}/EplApiProcessImageSetup.c
Review
Quoted 8 lines
package/openpowerlink/openpowerlink-FIX-demo_mn_qt.patch new file +7
-0++ ${POWERLINK_SOURCE_DIR}/EplStack/EplDebug.c + ) + + # The TRACE macros need trace.c on the Windows platform +-- +1.8.4 +(quoted diff) +0
-0
openpowerlink.mk
package/openpowerlink/openpowerlink.mk
Quoted 6 lines
new file mode 100644
index 0000000..ac28de9package/openpowerlink/openpowerlink.mk new file +0
-0@@ -0,0 +1,93 @@
+################################################################################
package/openpowerlink/openpowerlink.mk line 4
Quoted 4 lines
package/openpowerlink/openpowerlink.mk new file +3
-0+# +# openPOWERLINK +#
+################################################################################
package/openpowerlink/openpowerlink.mk
Quoted 4 lines
package/openpowerlink/openpowerlink.mk new file +4
-0+ +OPENPOWERLINK_VERSION = V1.08.3 +OPENPOWERLINK_SOURCE = openPOWERLINK-$(OPENPOWERLINK_VERSION).zip +OPENPOWERLINK_SITE =
http://downloads.sourceforge.net/project/openpowerlink/openPOWERLINK/V1.8.3
Quoted 8 lines
package/openpowerlink/openpowerlink.mk new file +8
-0+ +OPENPOWERLINK_LICENSE = BSD-2c, GPLv2 +OPENPOWERLINK_LICENSE_FILES = license.txt +OPENPOWERLINK_INSTALL_STAGING = YES + +ifeq ($(BR2_i386),y) +OPENPOWERLINK_ARCH = x86 +endif
package/openpowerlink/openpowerlink.mk
Quoted 10 lines
package/openpowerlink/openpowerlink.mk new file +10
-0+ +ifeq ($(BR2_x86_64),y) +OPENPOWERLINK_ARCH = x86_64 +endif + +OPENPOWERLINK_CONF_OPT = -DCMAKE_SYSTEM_PROCESSOR=$(OPENPOWERLINK_ARCH) +OPENPOWERLINK_CONF_OPT += -DCMAKE_BUILD_TYPE=Debug +OPENPOWERLINK_CONF_OPT += -DCMAKE_INSTALL_PREFIX=/usr/ + +OPENPOWERLINK_DEBUG_LEVEL = $(call
qstrip,$(BR2_PACKAGE_OPENPOWERLINK_DEBUG_LEVEL))
Quoted 53 lines
package/openpowerlink/openpowerlink.mk new file +53
-0+ +ifeq ($(OPENPOWERLINK_DEBUG_LEVEL),) +OPENPOWERLINK_CONF_OPT += -DCFG_DEBUG_LVL=0xEC000000L +else +OPENPOWERLINK_CONF_OPT += -DCFG_DEBUG_LVL=$(OPENPOWERLINK_DEBUG_LEVEL) +endif + +ifeq ($(BR2_PACKAGE_OPENPOWERLINK_LIBPCAP),y) +# use the user space stack (libpcap) +OPENPOWERLINK_CONF_OPT += -DCFG_KERNEL_STACK=OFF +OPENPOWERLINK_DEPENDENCIES = libpcap +else +# use the kernel stack +OPENPOWERLINK_CONF_OPT += -DCFG_KERNEL_STACK=ON +OPENPOWERLINK_CONF_OPT += -DCFG_KERNEL_DIR=$(LINUX_DIR) +OPENPOWERLINK_CONF_OPT += -DCMAKE_SYSTEM_VERSION=$(LINUX_VERSION) +OPENPOWERLINK_DEPENDENCIES = linux +endif + +ifeq ($(BR2_PACKAGE_OPENPOWERLINK_82573),y) +OPENPOWERLINK_CONF_OPT += -DCFG_POWERLINK_EDRV=82573 +else ifeq ($(BR2_PACKAGE_OPENPOWERLINK_RTL8139),y) +OPENPOWERLINK_CONF_OPT += -DCFG_POWERLINK_EDRV=8139 +else ifeq ($(BR2_PACKAGE_OPENPOWERLINK_8255x),y) +OPENPOWERLINK_CONF_OPT += -DCFG_POWERLINK_EDRV=8255x +endif + +ifeq ($(BR2_PACKAGE_OPENPOWERLINK_MN),y) +OPENPOWERLINK_CONF_OPT += -DCFG_POWERLINK_MN=ON +else +OPENPOWERLINK_CONF_OPT += -DCFG_POWERLINK_MN=OFF +endif + +ifeq ($(BR2_PACKAGE_OPENPOWERLINK_DEMO_MN_CONSOLE),y) +OPENPOWERLINK_CONF_OPT += -DCFG_X86_DEMO_MN_CONSOLE=ON +else +OPENPOWERLINK_CONF_OPT += -DCFG_X86_DEMO_MN_CONSOLE=OFF +endif + +ifeq ($(BR2_PACKAGE_OPENPOWERLINK_DEMO_MN_QT),y) +OPENPOWERLINK_CONF_OPT += -DCFG_X86_DEMO_MN_QT=ON +OPENPOWERLINK_DEPENDENCIES += qt +else +OPENPOWERLINK_CONF_OPT += -DCFG_X86_DEMO_MN_QT=OFF +endif + +ifeq ($(BR2_PACKAGE_OPENPOWERLINK_DEMO_CN_CONSOLE),y) +OPENPOWERLINK_CONF_OPT += -DCFG_X86_DEMO_CN_CONSOLE=ON +else +OPENPOWERLINK_CONF_OPT += -DCFG_X86_DEMO_CN_CONSOLE=OFF +endif + +ifeq ($(BR2_PACKAGE_OPENPOWERLINK_DEMO_LINUX_KERNEL),y)
package/openpowerlink/openpowerlink.mk
Quoted 10 lines
package/openpowerlink/openpowerlink.mk new file +10
-0+OPENPOWERLINK_CONF_OPT += -DCFG_X86_DEMO_LINUX_KERNEL=ON +else +OPENPOWERLINK_CONF_OPT += -DCFG_X86_DEMO_LINUX_KERNEL=OFF +endif + +define OPENPOWERLINK_EXTRACT_CMDS + $(RM) -rf $(OPENPOWERLINK_DIR) + unzip -q -d $(BUILD_DIR)/ $(DL_DIR)/$(OPENPOWERLINK_SOURCE) + test -d $(OPENPOWERLINK_DIR) || \ + mv $(BUILD_DIR)/$(subst .zip,,$(OPENPOWERLINK_SOURCE))
$(OPENPOWERLINK_DIR)
Quoted 5 lines
package/openpowerlink/openpowerlink.mk new file +3
-1+endef + +$(eval $(cmake-package)) --1.8.4
Thanks for mentioning the line wrapping problem, I wasn't aware. I think the problem only occurs when I send mail from the gmail app on my phone. I now changed a setting but I fear it will not affect outgoing mail. This is a test mail.
If it doesn't work I'll find a better mail app for android. Suggestions are welcome...
Thanks,
Thomas
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20130921/3c1e7610/attachment-0001.html>
PATCH 1/1 Openpowerlink: new package
Dear Thomas De Schampheleire,
Quoted 4 lines · Thomas De Schampheleire
Thanks for mentioning the line wrapping problem, I wasn't aware. I think the problem only occurs when I send mail from the gmail app on my phone. I now changed a setting but I fear it will not affect outgoing mail. This is a test mail.
Your reply was line-wrapped.
Quoted 2 lines
If it doesn't work I'll find a better mail app for android. Suggestions are welcome...
Have you tried K9 ? I use it, but I admit only for reading e-mails. I find a phone so impractical to write stuff that I only ever send e-mails from my laptop.
Best regards,
Thomas
Signature · 3 lines
Thomas Petazzoni, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com
PATCH 1/1 Openpowerlink: new package
Hi Thomas,
Quoted 6 lines · Thomas Petazzoni
Quoted 2 lines
If it doesn't work I'll find a better mail app for android. Suggestions are welcome...
Have you tried K9 ? I use it, but I admit only for reading e-mails. I find a phone so impractical to write stuff that I only ever send e-mails from my laptop.
After your initial mail I tried K9, but those darn bastards also wrap at 72 lines! Luckily, K9 is open-source, and I found the offending code quite easily and filed a bug report here:
http://code.google.com/p/k9mail/issues/detail?id=5957
In the mean time, I'll try to compile it myself, haven't done any Android development before.
Best regards,
Thomas
PATCH 1/1 Openpowerlink: new package
Dear Thomas De Schampheleire,
Quoted 6 lines · Thomas De Schampheleire
After your initial mail I tried K9, but those darn bastards also wrap at 72 lines! Luckily, K9 is open-source, and I found the offending code quite easily and filed a bug report here:
http://code.google.com/p/k9mail/issues/detail?id=5957
In the mean time, I'll try to compile it myself, haven't done any Android development before.
Nice!
This is getting out-of-topic, but personally, I like the wrap or to not wrap question to be decided on a per e-mail basis. When I need to reply to a patch, I don't want the original e-mail to be wrapped. However, when I reply to a normal e-mail that has been sent with Outlook or some other crappy mail client that does not wrap at all, then I generally like wrapping such e-mails to have a nice formatting when replying.
Best regards,
Thomas
Signature · 3 lines
Thomas Petazzoni, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com
PATCH 1/1 Openpowerlink: new package
In reply to Romain NaourHi Thomas,
Quoted 255 lines · Romain Naour
Signed-off-by Romain Naour <[email protected]>--- package/Config.in | 1 + package/openpowerlink/Config.in | 92 +++++++++++++++++++++ .../openpowerlink-FIX-demo_mn_qt.patch | 27 +++++++ package/openpowerlink/openpowerlink.mk | 93 ++++++++++++++++++++++ 4 files changed, 213 insertions(+) create mode 100644 package/openpowerlink/Config.in create mode 100644 package/openpowerlink/openpowerlink-FIX-demo_mn_qt.patch create mode 100644 package/openpowerlink/openpowerlink.mkpackage/Config.in +1
-0@@ -912,6 +912,7 @@ endmenu menu "Real-Time" source "package/xenomai/Config.in" source "package/rtai/Config.in" +source "package/openpowerlink/Config.in" endmenu menu "Shell and utilities"package/openpowerlink/Config.in new file +92
-0@@ -0,0 +1,92 @@ +comment "openpowerlink requires thread support in toolchain" + depends on !BR2_TOOLCHAIN_HAS_THREADS + +config BR2_PACKAGE_OPENPOWERLINK + bool "Openpowerlink" + depends on BR2_TOOLCHAIN_HAS_THREADS + depends on BR2_i386 || BR2_x86_64 + help + openPOWERLINK is an Open Source Industrial Ethernet + stack implementing the POWERLINK protocol for Managing Node + (MN, POWERLINK Master) and Controlled Node (CN, POWERLINK Slave). + + It is provided by SYSTEC electronic (http://www.systec-electronic.com), + B&R (http://www.br-automation.com) and + Kalycito (http://www.kalycito.com). + +if BR2_PACKAGE_OPENPOWERLINK + +choice + prompt "Openpowerlink mode" + +config BR2_PACKAGE_OPENPOWERLINK_LIBPCAP + bool "userspace stack" + select BR2_PACKAGE_LIBPCAP + +config BR2_PACKAGE_OPENPOWERLINK_KERNEL_MODULE + bool "kernel stack" + depends on BR2_LINUX_KERNEL + help + You may select BR2_PACKAGE_PCIUTILS for lscpi, and BR2_PACKAGE_PROCPS for ps command. + These commands are used in EplLoad and EplUndload scripts. + +endchoice + +if BR2_PACKAGE_OPENPOWERLINK_KERNEL_MODULE + +choice + prompt "Select Ethernet Powerlink Driver" + +config BR2_PACKAGE_OPENPOWERLINK_82573 + bool "Intel 82573" + +config BR2_PACKAGE_OPENPOWERLINK_8255x + bool "Intel 8255x" + +config BR2_PACKAGE_OPENPOWERLINK_RTL8139 + bool "Realteck RTL-8139" + +endchoice + +endif + +choice + prompt "Select MN/CN mode" + + config BR2_PACKAGE_OPENPOWERLINK_MN + bool "MN" + help + Enable Managing Node mode + + config BR2_PACKAGE_OPENPOWERLINK_CN + bool "CN" + help + Enable Controlled Node mode + +endchoice + +# Powerlink Demos +config BR2_PACKAGE_OPENPOWERLINK_DEMO_MN_CONSOLE + bool "Console MN demo" + depends on BR2_PACKAGE_OPENPOWERLINK_MN + +config BR2_PACKAGE_OPENPOWERLINK_DEMO_MN_QT + bool "QT MN demo" + depends on BR2_PACKAGE_OPENPOWERLINK_MN + select BR2_PACKAGE_QT + select BR2_PACKAGE_QT_STL + +config BR2_PACKAGE_OPENPOWERLINK_DEMO_CN_CONSOLE + bool "Console CN demo" + depends on !BR2_PACKAGE_OPENPOWERLINK_MN + +config BR2_PACKAGE_OPENPOWERLINK_DEMO_LINUX_KERNEL + bool "Kernel demo" + depends on BR2_PACKAGE_OPENPOWERLINK_KERNEL_MODULE + +config BR2_PACKAGE_OPENPOWERLINK_DEBUG_LEVEL + string "Debug level for EPL" + help + default value: 0xEC000000L + +endifpackage/openpowerlink/openpowerlink-FIX-demo_mn_qt.patch new file +27
-0@@ -0,0 +1,27 @@ +From 8658075bd7c49a7481e8f6d0d7a13b0651e1dfd7 Mon Sep 17 00:00:00 2001 +From: Romain Naour <[email protected]> +Date: Wed, 18 Sep 2013 23:33:04 +0200 +Subject: [PATCH 1/1] [FIX] demo_mn_qt: add EplDebug.c in demo_sources list + +demo_mn_qt use EplGetEmergErrCodeStr() + +Signed-off-by: Romain Naour <[email protected]> +--- + Examples/X86/Generic/demo_mn_qt/CMakeLists.txt | 1 + + 1 file changed, 1 insertion(+) + +diff --git a/Examples/X86/Generic/demo_mn_qt/CMakeLists.txt b/Examples/X86/Generic/demo_mn_qt/CMakeLists.txt +index 9db2f7f..48ae9eb 100644 +--- a/Examples/X86/Generic/demo_mn_qt/CMakeLists.txt ++++ b/Examples/X86/Generic/demo_mn_qt/CMakeLists.txt +@@ -78,6 +78,7 @@ SET(DEMO_SOURCES src/EplApi.cpp + src/MainWindow.cpp + src/NodeState.cpp + ${POWERLINK_SOURCE_DIR}/ObjDicts/${OBJDICT}/EplApiProcessImageSetup.c ++ ${POWERLINK_SOURCE_DIR}/EplStack/EplDebug.c + ) + + # The TRACE macros need trace.c on the Windows platform +-- +1.8.4 +package/openpowerlink/openpowerlink.mk new file +93
-1@@ -0,0 +1,93 @@ +################################################################################ +# +# openPOWERLINK +# +################################################################################ + +OPENPOWERLINK_VERSION = V1.08.3 +OPENPOWERLINK_SOURCE = openPOWERLINK-$(OPENPOWERLINK_VERSION).zip +OPENPOWERLINK_SITE = http://downloads.sourceforge.net/project/openpowerlink/openPOWERLINK/V1.8.3 + +OPENPOWERLINK_LICENSE = BSD-2c, GPLv2 +OPENPOWERLINK_LICENSE_FILES = license.txt +OPENPOWERLINK_INSTALL_STAGING = YES + +ifeq ($(BR2_i386),y) +OPENPOWERLINK_ARCH = x86 +endif + +ifeq ($(BR2_x86_64),y) +OPENPOWERLINK_ARCH = x86_64 +endif + +OPENPOWERLINK_CONF_OPT = -DCMAKE_SYSTEM_PROCESSOR=$(OPENPOWERLINK_ARCH) +OPENPOWERLINK_CONF_OPT += -DCMAKE_BUILD_TYPE=Debug +OPENPOWERLINK_CONF_OPT += -DCMAKE_INSTALL_PREFIX=/usr/ + +OPENPOWERLINK_DEBUG_LEVEL = $(call qstrip,$(BR2_PACKAGE_OPENPOWERLINK_DEBUG_LEVEL)) + +ifeq ($(OPENPOWERLINK_DEBUG_LEVEL),) +OPENPOWERLINK_CONF_OPT += -DCFG_DEBUG_LVL=0xEC000000L +else +OPENPOWERLINK_CONF_OPT += -DCFG_DEBUG_LVL=$(OPENPOWERLINK_DEBUG_LEVEL) +endif + +ifeq ($(BR2_PACKAGE_OPENPOWERLINK_LIBPCAP),y) +# use the user space stack (libpcap) +OPENPOWERLINK_CONF_OPT += -DCFG_KERNEL_STACK=OFF +OPENPOWERLINK_DEPENDENCIES = libpcap +else +# use the kernel stack +OPENPOWERLINK_CONF_OPT += -DCFG_KERNEL_STACK=ON +OPENPOWERLINK_CONF_OPT += -DCFG_KERNEL_DIR=$(LINUX_DIR) +OPENPOWERLINK_CONF_OPT += -DCMAKE_SYSTEM_VERSION=$(LINUX_VERSION) +OPENPOWERLINK_DEPENDENCIES = linux +endif + +ifeq ($(BR2_PACKAGE_OPENPOWERLINK_82573),y) +OPENPOWERLINK_CONF_OPT += -DCFG_POWERLINK_EDRV=82573 +else ifeq ($(BR2_PACKAGE_OPENPOWERLINK_RTL8139),y) +OPENPOWERLINK_CONF_OPT += -DCFG_POWERLINK_EDRV=8139 +else ifeq ($(BR2_PACKAGE_OPENPOWERLINK_8255x),y) +OPENPOWERLINK_CONF_OPT += -DCFG_POWERLINK_EDRV=8255x +endif + +ifeq ($(BR2_PACKAGE_OPENPOWERLINK_MN),y) +OPENPOWERLINK_CONF_OPT += -DCFG_POWERLINK_MN=ON +else +OPENPOWERLINK_CONF_OPT += -DCFG_POWERLINK_MN=OFF +endif + +ifeq ($(BR2_PACKAGE_OPENPOWERLINK_DEMO_MN_CONSOLE),y) +OPENPOWERLINK_CONF_OPT += -DCFG_X86_DEMO_MN_CONSOLE=ON +else +OPENPOWERLINK_CONF_OPT += -DCFG_X86_DEMO_MN_CONSOLE=OFF +endif + +ifeq ($(BR2_PACKAGE_OPENPOWERLINK_DEMO_MN_QT),y) +OPENPOWERLINK_CONF_OPT += -DCFG_X86_DEMO_MN_QT=ON +OPENPOWERLINK_DEPENDENCIES += qt +else +OPENPOWERLINK_CONF_OPT += -DCFG_X86_DEMO_MN_QT=OFF +endif + +ifeq ($(BR2_PACKAGE_OPENPOWERLINK_DEMO_CN_CONSOLE),y) +OPENPOWERLINK_CONF_OPT += -DCFG_X86_DEMO_CN_CONSOLE=ON +else +OPENPOWERLINK_CONF_OPT += -DCFG_X86_DEMO_CN_CONSOLE=OFF +endif + +ifeq ($(BR2_PACKAGE_OPENPOWERLINK_DEMO_LINUX_KERNEL),y) +OPENPOWERLINK_CONF_OPT += -DCFG_X86_DEMO_LINUX_KERNEL=ON +else +OPENPOWERLINK_CONF_OPT += -DCFG_X86_DEMO_LINUX_KERNEL=OFF +endif + +define OPENPOWERLINK_EXTRACT_CMDS + $(RM) -rf $(OPENPOWERLINK_DIR) + unzip -q -d $(BUILD_DIR)/ $(DL_DIR)/$(OPENPOWERLINK_SOURCE) + test -d $(OPENPOWERLINK_DIR) || \ + mv $(BUILD_DIR)/$(subst .zip,,$(OPENPOWERLINK_SOURCE)) $(OPENPOWERLINK_DIR) +endef + +$(eval $(cmake-package)) --
Quoted 2 lines
1.8.4
Hmm, that test didn't seem to work.
This test is from Gmail on desktop, just to be double-check that that is OK. Sorry for the spam by the way, don't know a better way to check it, because the gmail web interface does not show any bad line wrapping...
Best regards,
Thomas
PATCH 1/1 Openpowerlink: new package
Dear Thomas De Schampheleire,
Quoted 5 lines · Thomas De Schampheleire
Hmm, that test didn't seem to work.
This test is from Gmail on desktop, just to be double-check that that is OK. Sorry for the spam by the way, don't know a better way to check it, because the gmail web interface does not show any bad line wrapping...
This reply was correct, with no line-wrapping of the patch.
Thanks!
Thomas
Signature · 3 lines
Thomas Petazzoni, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com
PATCH 1/1 Openpowerlink: new package
In reply to Romain NaourRomain Naour <[email protected]> schreef:
Quoted 266 lines
Signed-off-by Romain Naour <[email protected]>---
package/Config.in | 1 +
package/openpowerlink/Config.in | 92
+++++++++++++++++++++.../openpowerlink-FIX-demo_mn_qt.patch| 27 +++++++package/openpowerlink/openpowerlink.mk| 93
++++++++++++++++++++++4 files changed, 213 insertions(+)create mode 100644 package/openpowerlink/Config.in create mode 100644
package/openpowerlink/openpowerlink-FIX-demo_mn_qt.patchcreate mode 100644package/openpowerlink/openpowerlink.mkpackage/Config.in +0
-0@@ -912,6 +912,7 @@ endmenumenu "Real-Time"
source "package/xenomai/Config.in"
source "package/rtai/Config.in"
+source "package/openpowerlink/Config.in"
endmenumenu "Shell and utilities"
package/openpowerlink/Config.in new file +13
-0@@ -0,0 +1,92 @@ +comment "openpowerlink requires thread support in toolchain" + depends on !BR2_TOOLCHAIN_HAS_THREADS + +config BR2_PACKAGE_OPENPOWERLINK + bool "Openpowerlink" + depends on BR2_TOOLCHAIN_HAS_THREADS + depends on BR2_i386 || BR2_x86_64 + help + openPOWERLINK is an Open Source Industrial Ethernet + stack implementing the POWERLINK protocol for Managing Node + (MN, POWERLINK Master) and Controlled Node (CN, POWERLINK Slave). + + It is provided by SYSTEC electronic(http://www.systec-electronic.com),
package/openpowerlink/Config.in new file +17
-0+ B&R (http://www.br-automation.com) and + Kalycito (http://www.kalycito.com). + +if BR2_PACKAGE_OPENPOWERLINK + +choice + prompt "Openpowerlink mode" + +config BR2_PACKAGE_OPENPOWERLINK_LIBPCAP + bool "userspace stack" + select BR2_PACKAGE_LIBPCAP + +config BR2_PACKAGE_OPENPOWERLINK_KERNEL_MODULE + bool "kernel stack" + depends on BR2_LINUX_KERNEL + help + You may select BR2_PACKAGE_PCIUTILS for lscpi, and
BR2_PACKAGE_PROCPSfor ps command.package/openpowerlink/Config.in new file +62
-0+ These commands are used in EplLoad and EplUndload scripts. + +endchoice + +if BR2_PACKAGE_OPENPOWERLINK_KERNEL_MODULE + +choice + prompt "Select Ethernet Powerlink Driver" + +config BR2_PACKAGE_OPENPOWERLINK_82573 + bool "Intel 82573" + +config BR2_PACKAGE_OPENPOWERLINK_8255x + bool "Intel 8255x" + +config BR2_PACKAGE_OPENPOWERLINK_RTL8139 + bool "Realteck RTL-8139" + +endchoice + +endif + +choice + prompt "Select MN/CN mode" + + config BR2_PACKAGE_OPENPOWERLINK_MN + bool "MN" + help + Enable Managing Node mode + + config BR2_PACKAGE_OPENPOWERLINK_CN + bool "CN" + help + Enable Controlled Node mode + +endchoice + +# Powerlink Demos +config BR2_PACKAGE_OPENPOWERLINK_DEMO_MN_CONSOLE + bool "Console MN demo" + depends on BR2_PACKAGE_OPENPOWERLINK_MN + +config BR2_PACKAGE_OPENPOWERLINK_DEMO_MN_QT + bool "QT MN demo" + depends on BR2_PACKAGE_OPENPOWERLINK_MN + select BR2_PACKAGE_QT + select BR2_PACKAGE_QT_STL + +config BR2_PACKAGE_OPENPOWERLINK_DEMO_CN_CONSOLE + bool "Console CN demo" + depends on !BR2_PACKAGE_OPENPOWERLINK_MN + +config BR2_PACKAGE_OPENPOWERLINK_DEMO_LINUX_KERNEL + bool "Kernel demo" + depends on BR2_PACKAGE_OPENPOWERLINK_KERNEL_MODULE + +config BR2_PACKAGE_OPENPOWERLINK_DEBUG_LEVEL + string "Debug level for EPL" + help + default value: 0xEC000000L + +endifpackage/openpowerlink/openpowerlink-FIX-demo_mn_qt.patch new file +4
-0@@ -0,0 +1,27 @@ +From 8658075bd7c49a7481e8f6d0d7a13b0651e1dfd7 Mon Sep 17 00:00:00 2001 +From: Romain Naour <[email protected]> +Date: Wed, 18 Sep 2013 23:33:04 +0200 +Subject: [PATCH 1/1] [FIX] demo_mn_qt: add EplDebug.c in demo_sourceslist
package/openpowerlink/openpowerlink-FIX-demo_mn_qt.patch new file +9
-0+ +demo_mn_qt use EplGetEmergErrCodeStr() + +Signed-off-by: Romain Naour <[email protected]> +--- + Examples/X86/Generic/demo_mn_qt/CMakeLists.txt | 1 + + 1 file changed, 1 insertion(+) + +diff --git a/Examples/X86/Generic/demo_mn_qt/CMakeLists.txt
b/Examples/X86/Generic/demo_mn_qt/CMakeLists.txtpackage/openpowerlink/openpowerlink-FIX-demo_mn_qt.patch new file +7
-0+index 9db2f7f..48ae9eb 100644 +--- a/Examples/X86/Generic/demo_mn_qt/CMakeLists.txt ++++ b/Examples/X86/Generic/demo_mn_qt/CMakeLists.txt +@@ -78,6 +78,7 @@ SET(DEMO_SOURCES src/EplApi.cpp + src/MainWindow.cpp + src/NodeState.cpp +
${POWERLINK_SOURCE_DIR}/ObjDicts/${OBJDICT}/EplApiProcessImageSetup.c
++${POWERLINK_SOURCE_DIR}/EplStack/EplDebug.cpackage/openpowerlink/openpowerlink-FIX-demo_mn_qt.patch new file +6
-0+ ) + + # The TRACE macros need trace.c on the Windows platform +-- +1.8.4 +package/openpowerlink/openpowerlink.mk new file +9
-0@@ -0,0 +1,93 @@ +################################################################################ +# +# openPOWERLINK +# +################################################################################ + +OPENPOWERLINK_VERSION = V1.08.3 +OPENPOWERLINK_SOURCE = openPOWERLINK-$(OPENPOWERLINK_VERSION).zip +OPENPOWERLINK_SITE =http://downloads.sourceforge.net/project/openpowerlink/openPOWERLINK/V1.8.3
package/openpowerlink/openpowerlink.mk new file +18
-1+ +OPENPOWERLINK_LICENSE = BSD-2c, GPLv2 +OPENPOWERLINK_LICENSE_FILES = license.txt +OPENPOWERLINK_INSTALL_STAGING = YES + +ifeq ($(BR2_i386),y) +OPENPOWERLINK_ARCH = x86 +endif + +ifeq ($(BR2_x86_64),y) +OPENPOWERLINK_ARCH = x86_64 +endif + +OPENPOWERLINK_CONF_OPT = -DCMAKE_SYSTEM_PROCESSOR=$(OPENPOWERLINK_ARCH) +OPENPOWERLINK_CONF_OPT += -DCMAKE_BUILD_TYPE=Debug +OPENPOWERLINK_CONF_OPT += -DCMAKE_INSTALL_PREFIX=/usr/ + +OPENPOWERLINK_DEBUG_LEVEL = $(callqstrip,$(BR2_PACKAGE_OPENPOWERLINK_DEBUG_LEVEL))
package/openpowerlink/openpowerlink.mk new file +63
-0+ +ifeq ($(OPENPOWERLINK_DEBUG_LEVEL),) +OPENPOWERLINK_CONF_OPT += -DCFG_DEBUG_LVL=0xEC000000L +else +OPENPOWERLINK_CONF_OPT += -DCFG_DEBUG_LVL=$(OPENPOWERLINK_DEBUG_LEVEL) +endif + +ifeq ($(BR2_PACKAGE_OPENPOWERLINK_LIBPCAP),y) +# use the user space stack (libpcap) +OPENPOWERLINK_CONF_OPT += -DCFG_KERNEL_STACK=OFF +OPENPOWERLINK_DEPENDENCIES = libpcap +else +# use the kernel stack +OPENPOWERLINK_CONF_OPT += -DCFG_KERNEL_STACK=ON +OPENPOWERLINK_CONF_OPT += -DCFG_KERNEL_DIR=$(LINUX_DIR) +OPENPOWERLINK_CONF_OPT += -DCMAKE_SYSTEM_VERSION=$(LINUX_VERSION) +OPENPOWERLINK_DEPENDENCIES = linux +endif + +ifeq ($(BR2_PACKAGE_OPENPOWERLINK_82573),y) +OPENPOWERLINK_CONF_OPT += -DCFG_POWERLINK_EDRV=82573 +else ifeq ($(BR2_PACKAGE_OPENPOWERLINK_RTL8139),y) +OPENPOWERLINK_CONF_OPT += -DCFG_POWERLINK_EDRV=8139 +else ifeq ($(BR2_PACKAGE_OPENPOWERLINK_8255x),y) +OPENPOWERLINK_CONF_OPT += -DCFG_POWERLINK_EDRV=8255x +endif + +ifeq ($(BR2_PACKAGE_OPENPOWERLINK_MN),y) +OPENPOWERLINK_CONF_OPT += -DCFG_POWERLINK_MN=ON +else +OPENPOWERLINK_CONF_OPT += -DCFG_POWERLINK_MN=OFF +endif + +ifeq ($(BR2_PACKAGE_OPENPOWERLINK_DEMO_MN_CONSOLE),y) +OPENPOWERLINK_CONF_OPT += -DCFG_X86_DEMO_MN_CONSOLE=ON +else +OPENPOWERLINK_CONF_OPT += -DCFG_X86_DEMO_MN_CONSOLE=OFF +endif + +ifeq ($(BR2_PACKAGE_OPENPOWERLINK_DEMO_MN_QT),y) +OPENPOWERLINK_CONF_OPT += -DCFG_X86_DEMO_MN_QT=ON +OPENPOWERLINK_DEPENDENCIES += qt +else +OPENPOWERLINK_CONF_OPT += -DCFG_X86_DEMO_MN_QT=OFF +endif + +ifeq ($(BR2_PACKAGE_OPENPOWERLINK_DEMO_CN_CONSOLE),y) +OPENPOWERLINK_CONF_OPT += -DCFG_X86_DEMO_CN_CONSOLE=ON +else +OPENPOWERLINK_CONF_OPT += -DCFG_X86_DEMO_CN_CONSOLE=OFF +endif + +ifeq ($(BR2_PACKAGE_OPENPOWERLINK_DEMO_LINUX_KERNEL),y) +OPENPOWERLINK_CONF_OPT += -DCFG_X86_DEMO_LINUX_KERNEL=ON +else +OPENPOWERLINK_CONF_OPT += -DCFG_X86_DEMO_LINUX_KERNEL=OFF +endif + +define OPENPOWERLINK_EXTRACT_CMDS + $(RM) -rf $(OPENPOWERLINK_DIR) + unzip -q -d $(BUILD_DIR)/ $(DL_DIR)/$(OPENPOWERLINK_SOURCE) + test -d $(OPENPOWERLINK_DIR) || \ + mv $(BUILD_DIR)/$(subst .zip,,$(OPENPOWERLINK_SOURCE))$(OPENPOWERLINK_DIR)
package/openpowerlink/openpowerlink.mk line 93
Quoted 3 lines
package/openpowerlink/openpowerlink.mk new file +3
-0+endef + +$(eval $(cmake-package))
Here it's another test from k9...
PATCH 1/1 Openpowerlink: new package
In reply to Romain NaourRomain Naour <[email protected]> schreef:
Quoted 266 lines
Signed-off-by Romain Naour <[email protected]>---
package/Config.in | 1 +
package/openpowerlink/Config.in | 92
+++++++++++++++++++++.../openpowerlink-FIX-demo_mn_qt.patch| 27 +++++++package/openpowerlink/openpowerlink.mk| 93
++++++++++++++++++++++4 files changed, 213 insertions(+)create mode 100644 package/openpowerlink/Config.in create mode 100644
package/openpowerlink/openpowerlink-FIX-demo_mn_qt.patchcreate mode 100644package/openpowerlink/openpowerlink.mkpackage/Config.in +0
-0@@ -912,6 +912,7 @@ endmenumenu "Real-Time"
source "package/xenomai/Config.in"
source "package/rtai/Config.in"
+source "package/openpowerlink/Config.in"
endmenumenu "Shell and utilities"
package/openpowerlink/Config.in new file +13
-0@@ -0,0 +1,92 @@ +comment "openpowerlink requires thread support in toolchain" + depends on !BR2_TOOLCHAIN_HAS_THREADS + +config BR2_PACKAGE_OPENPOWERLINK + bool "Openpowerlink" + depends on BR2_TOOLCHAIN_HAS_THREADS + depends on BR2_i386 || BR2_x86_64 + help + openPOWERLINK is an Open Source Industrial Ethernet + stack implementing the POWERLINK protocol for Managing Node + (MN, POWERLINK Master) and Controlled Node (CN, POWERLINK Slave). + + It is provided by SYSTEC electronic(http://www.systec-electronic.com),
package/openpowerlink/Config.in new file +17
-0+ B&R (http://www.br-automation.com) and + Kalycito (http://www.kalycito.com). + +if BR2_PACKAGE_OPENPOWERLINK + +choice + prompt "Openpowerlink mode" + +config BR2_PACKAGE_OPENPOWERLINK_LIBPCAP + bool "userspace stack" + select BR2_PACKAGE_LIBPCAP + +config BR2_PACKAGE_OPENPOWERLINK_KERNEL_MODULE + bool "kernel stack" + depends on BR2_LINUX_KERNEL + help + You may select BR2_PACKAGE_PCIUTILS for lscpi, and
BR2_PACKAGE_PROCPSfor ps command.package/openpowerlink/Config.in new file +62
-0+ These commands are used in EplLoad and EplUndload scripts. + +endchoice + +if BR2_PACKAGE_OPENPOWERLINK_KERNEL_MODULE + +choice + prompt "Select Ethernet Powerlink Driver" + +config BR2_PACKAGE_OPENPOWERLINK_82573 + bool "Intel 82573" + +config BR2_PACKAGE_OPENPOWERLINK_8255x + bool "Intel 8255x" + +config BR2_PACKAGE_OPENPOWERLINK_RTL8139 + bool "Realteck RTL-8139" + +endchoice + +endif + +choice + prompt "Select MN/CN mode" + + config BR2_PACKAGE_OPENPOWERLINK_MN + bool "MN" + help + Enable Managing Node mode + + config BR2_PACKAGE_OPENPOWERLINK_CN + bool "CN" + help + Enable Controlled Node mode + +endchoice + +# Powerlink Demos +config BR2_PACKAGE_OPENPOWERLINK_DEMO_MN_CONSOLE + bool "Console MN demo" + depends on BR2_PACKAGE_OPENPOWERLINK_MN + +config BR2_PACKAGE_OPENPOWERLINK_DEMO_MN_QT + bool "QT MN demo" + depends on BR2_PACKAGE_OPENPOWERLINK_MN + select BR2_PACKAGE_QT + select BR2_PACKAGE_QT_STL + +config BR2_PACKAGE_OPENPOWERLINK_DEMO_CN_CONSOLE + bool "Console CN demo" + depends on !BR2_PACKAGE_OPENPOWERLINK_MN + +config BR2_PACKAGE_OPENPOWERLINK_DEMO_LINUX_KERNEL + bool "Kernel demo" + depends on BR2_PACKAGE_OPENPOWERLINK_KERNEL_MODULE + +config BR2_PACKAGE_OPENPOWERLINK_DEBUG_LEVEL + string "Debug level for EPL" + help + default value: 0xEC000000L + +endifpackage/openpowerlink/openpowerlink-FIX-demo_mn_qt.patch new file +4
-0@@ -0,0 +1,27 @@ +From 8658075bd7c49a7481e8f6d0d7a13b0651e1dfd7 Mon Sep 17 00:00:00 2001 +From: Romain Naour <[email protected]> +Date: Wed, 18 Sep 2013 23:33:04 +0200 +Subject: [PATCH 1/1] [FIX] demo_mn_qt: add EplDebug.c in demo_sourceslist
package/openpowerlink/openpowerlink-FIX-demo_mn_qt.patch new file +9
-0+ +demo_mn_qt use EplGetEmergErrCodeStr() + +Signed-off-by: Romain Naour <[email protected]> +--- + Examples/X86/Generic/demo_mn_qt/CMakeLists.txt | 1 + + 1 file changed, 1 insertion(+) + +diff --git a/Examples/X86/Generic/demo_mn_qt/CMakeLists.txt
b/Examples/X86/Generic/demo_mn_qt/CMakeLists.txtpackage/openpowerlink/openpowerlink-FIX-demo_mn_qt.patch new file +7
-0+index 9db2f7f..48ae9eb 100644 +--- a/Examples/X86/Generic/demo_mn_qt/CMakeLists.txt ++++ b/Examples/X86/Generic/demo_mn_qt/CMakeLists.txt +@@ -78,6 +78,7 @@ SET(DEMO_SOURCES src/EplApi.cpp + src/MainWindow.cpp + src/NodeState.cpp +
${POWERLINK_SOURCE_DIR}/ObjDicts/${OBJDICT}/EplApiProcessImageSetup.c
++${POWERLINK_SOURCE_DIR}/EplStack/EplDebug.cpackage/openpowerlink/openpowerlink-FIX-demo_mn_qt.patch new file +6
-0+ ) + + # The TRACE macros need trace.c on the Windows platform +-- +1.8.4 +package/openpowerlink/openpowerlink.mk new file +9
-0@@ -0,0 +1,93 @@ +################################################################################ +# +# openPOWERLINK +# +################################################################################ + +OPENPOWERLINK_VERSION = V1.08.3 +OPENPOWERLINK_SOURCE = openPOWERLINK-$(OPENPOWERLINK_VERSION).zip +OPENPOWERLINK_SITE =http://downloads.sourceforge.net/project/openpowerlink/openPOWERLINK/V1.8.3
package/openpowerlink/openpowerlink.mk new file +18
-1+ +OPENPOWERLINK_LICENSE = BSD-2c, GPLv2 +OPENPOWERLINK_LICENSE_FILES = license.txt +OPENPOWERLINK_INSTALL_STAGING = YES + +ifeq ($(BR2_i386),y) +OPENPOWERLINK_ARCH = x86 +endif + +ifeq ($(BR2_x86_64),y) +OPENPOWERLINK_ARCH = x86_64 +endif + +OPENPOWERLINK_CONF_OPT = -DCMAKE_SYSTEM_PROCESSOR=$(OPENPOWERLINK_ARCH) +OPENPOWERLINK_CONF_OPT += -DCMAKE_BUILD_TYPE=Debug +OPENPOWERLINK_CONF_OPT += -DCMAKE_INSTALL_PREFIX=/usr/ + +OPENPOWERLINK_DEBUG_LEVEL = $(callqstrip,$(BR2_PACKAGE_OPENPOWERLINK_DEBUG_LEVEL))
package/openpowerlink/openpowerlink.mk new file +63
-0+ +ifeq ($(OPENPOWERLINK_DEBUG_LEVEL),) +OPENPOWERLINK_CONF_OPT += -DCFG_DEBUG_LVL=0xEC000000L +else +OPENPOWERLINK_CONF_OPT += -DCFG_DEBUG_LVL=$(OPENPOWERLINK_DEBUG_LEVEL) +endif + +ifeq ($(BR2_PACKAGE_OPENPOWERLINK_LIBPCAP),y) +# use the user space stack (libpcap) +OPENPOWERLINK_CONF_OPT += -DCFG_KERNEL_STACK=OFF +OPENPOWERLINK_DEPENDENCIES = libpcap +else +# use the kernel stack +OPENPOWERLINK_CONF_OPT += -DCFG_KERNEL_STACK=ON +OPENPOWERLINK_CONF_OPT += -DCFG_KERNEL_DIR=$(LINUX_DIR) +OPENPOWERLINK_CONF_OPT += -DCMAKE_SYSTEM_VERSION=$(LINUX_VERSION) +OPENPOWERLINK_DEPENDENCIES = linux +endif + +ifeq ($(BR2_PACKAGE_OPENPOWERLINK_82573),y) +OPENPOWERLINK_CONF_OPT += -DCFG_POWERLINK_EDRV=82573 +else ifeq ($(BR2_PACKAGE_OPENPOWERLINK_RTL8139),y) +OPENPOWERLINK_CONF_OPT += -DCFG_POWERLINK_EDRV=8139 +else ifeq ($(BR2_PACKAGE_OPENPOWERLINK_8255x),y) +OPENPOWERLINK_CONF_OPT += -DCFG_POWERLINK_EDRV=8255x +endif + +ifeq ($(BR2_PACKAGE_OPENPOWERLINK_MN),y) +OPENPOWERLINK_CONF_OPT += -DCFG_POWERLINK_MN=ON +else +OPENPOWERLINK_CONF_OPT += -DCFG_POWERLINK_MN=OFF +endif + +ifeq ($(BR2_PACKAGE_OPENPOWERLINK_DEMO_MN_CONSOLE),y) +OPENPOWERLINK_CONF_OPT += -DCFG_X86_DEMO_MN_CONSOLE=ON +else +OPENPOWERLINK_CONF_OPT += -DCFG_X86_DEMO_MN_CONSOLE=OFF +endif + +ifeq ($(BR2_PACKAGE_OPENPOWERLINK_DEMO_MN_QT),y) +OPENPOWERLINK_CONF_OPT += -DCFG_X86_DEMO_MN_QT=ON +OPENPOWERLINK_DEPENDENCIES += qt +else +OPENPOWERLINK_CONF_OPT += -DCFG_X86_DEMO_MN_QT=OFF +endif + +ifeq ($(BR2_PACKAGE_OPENPOWERLINK_DEMO_CN_CONSOLE),y) +OPENPOWERLINK_CONF_OPT += -DCFG_X86_DEMO_CN_CONSOLE=ON +else +OPENPOWERLINK_CONF_OPT += -DCFG_X86_DEMO_CN_CONSOLE=OFF +endif + +ifeq ($(BR2_PACKAGE_OPENPOWERLINK_DEMO_LINUX_KERNEL),y) +OPENPOWERLINK_CONF_OPT += -DCFG_X86_DEMO_LINUX_KERNEL=ON +else +OPENPOWERLINK_CONF_OPT += -DCFG_X86_DEMO_LINUX_KERNEL=OFF +endif + +define OPENPOWERLINK_EXTRACT_CMDS + $(RM) -rf $(OPENPOWERLINK_DIR) + unzip -q -d $(BUILD_DIR)/ $(DL_DIR)/$(OPENPOWERLINK_SOURCE) + test -d $(OPENPOWERLINK_DIR) || \ + mv $(BUILD_DIR)/$(subst .zip,,$(OPENPOWERLINK_SOURCE))$(OPENPOWERLINK_DIR)
package/openpowerlink/openpowerlink.mk line 93
Quoted 3 lines
package/openpowerlink/openpowerlink.mk new file +3
-0+endef + +$(eval $(cmake-package))
Why is this so hard?