i.MX6DQ/DLS: Add pad MX6_PAD_GPIO_1__USB_OTG_ID
PATCH v2 1/1 i.MX6DQ/DLS: Add pad MX6_PAD_GPIO_1__USB_OTG_ID
This patch adds the pad to i.MX6DQ and changes the i.MX6DLS declaration to match the Linux kernel declaration.
---
Note that this is needed for OTG/UDC work Troy is prepping for i.MX6 and that the previous declaration of MX6_PAD_GPIO_1__USBOTG_ID was not previously used.
V2 fixes cut & paste bug (wrong value for mx6q).
arch/arm/include/asm/arch-mx6/mx6dl_pins.h | 2 +- arch/arm/include/asm/arch-mx6/mx6q_pins.h | 1 + 2 files changed, 2 insertions(+), 1 deletion(-)
arch/arm/include/asm/arch-mx6/mx6dl_pins.h +1 -1
@@ -1043,7 +1043,7 @@ enum {MX6_PAD_GPIO_1__ESAI1_SCKR =IOMUX_PAD (0x05E0 ,0x0210 ,0 ,0x083C ,1 ,0 ),MX6_PAD_GPIO_1__WDOG2_WDOG_B =IOMUX_PAD (0x05E0 ,0x0210 ,1 ,0x0000 ,0 ,0 ),MX6_PAD_GPIO_1__KPP_ROW_5 =IOMUX_PAD (0x05E0 ,0x0210 ,2 ,0x08CC ,1 ,0 ), -MX6_PAD_GPIO_1__USBOTG_ID =IOMUX_PAD (0x05E0 ,0x0210 ,3 ,0x0790 ,1 ,0 ), +MX6_PAD_GPIO_1__USB_OTG_ID =IOMUX_PAD (0x05E0 ,0x0210 ,3 ,0x0790 ,1 ,0 ),MX6_PAD_GPIO_1__PWM2_PWMO =IOMUX_PAD (0x05E0 ,0x0210 ,4 ,0x0000 ,0 ,0 ),MX6_PAD_GPIO_1__GPIO_1_1 =IOMUX_PAD (0x05E0 ,0x0210 ,5 ,0x0000 ,0 ,0 ), MX6_PAD_GPIO_1__USDHC1_CD = IOMUX_PAD(0x05E0, 0x0210, 6, 0x0000, 0, 0),
arch/arm/include/asm/arch-mx6/mx6q_pins.h +1 -0
@@ -984,6 +984,7 @@ enum {MX6_PAD_GPIO_1__ESAI1_SCKR =IOMUX_PAD (0x05F4 ,0x0224 ,0 ,0x086C ,1 ,0 ),MX6_PAD_GPIO_1__WDOG2_WDOG_B =IOMUX_PAD (0x05F4 ,0x0224 ,1 ,0x0000 ,0 ,0 ),MX6_PAD_GPIO_1__KPP_ROW_5 =IOMUX_PAD (0x05F4 ,0x0224 ,2 ,0x08F4 ,0 ,0 ), +MX6_PAD_GPIO_1__USB_OTG_ID =IOMUX_PAD (0x05F4 ,0x0224 ,3 ,0x0000 ,0 ,0 ),MX6_PAD_GPIO_1__PWM2_PWMO =IOMUX_PAD (0x05F4 ,0x0224 ,4 ,0x0000 ,0 ,0 ),MX6_PAD_GPIO_1__GPIO_1_1 =IOMUX_PAD (0x05F4 ,0x0224 ,5 ,0x0000 ,0 ,0 ), MX6_PAD_GPIO_1__USDHC1_CD = IOMUX_PAD(0x05F4, 0x0224, 6, 0x0000, 0, 0),
Signature · 1 line
1.8.1.2
PATCH v2 1/1 i.MX6DQ/DLS: Add pad MX6_PAD_GPIO_1__USB_OTG_ID
Dear Eric Nelson,
Quoted 10 lines
This patch adds the pad to i.MX6DQ and changes the i.MX6DLS declaration to match the Linux kernel declaration.
Signed-off-by Eric Nelson <[email protected]>---
Note that this is needed for OTG/UDC work Troy is prepping for i.MX6 and that the previous declaration ofMX6_PAD_GPIO_1__USBOTG_IDwas not previously used.V2 fixes cut & paste bug (wrong value for mx6q).
Best regards,
Marek Vasut
PATCH v2 1/1 i.MX6DQ/DLS: Add pad MX6_PAD_GPIO_1__USB_OTG_ID
In reply to Eric NelsonQuoted 5 lines · Eric Nelson
This patch adds the pad to i.MX6DQ and changes the i.MX6DLS declaration to match the Linux kernel declaration.
Signed-off-by Eric Nelson <[email protected]>---
Applied to u-boot-imx (fix), thanks!
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================