Allow Buildroot to update toolchain
PATCH 1/1 Allow Buildroot to update toolchain
Sometimes it is useful to self contain a toolchain. To do this, one must somehow build in the extra libraries needed to make the toolchain complete. This patch adjusts Buildroot to, by configuration, modify the external toolchain while building additional libraries.
---
package/Makefile.in +7 -0
@@ -77,7 +77,9 @@ endif STAGING_SUBDIR = usr/$(GNU_TARGET_NAME)/sysroot +ifneq ($(BR2_TOOLCHAIN_COPY_LIBS_INTO_TOOLCHAIN),y) STAGING_DIR = $(HOST_DIR)/$(STAGING_SUBDIR) +endif TARGET_OPTIMIZATION:=$(call qstrip,$(BR2_TARGET_OPTIMIZATION))
@@ -161,6 +163,11 @@ TARGET_CC_NOCCACHE := $(TARGET_CC) TARGET_CXX_NOCCACHE := $(TARGET_CXX) +ifeq ($(BR2_TOOLCHAIN_COPY_LIBS_INTO_TOOLCHAIN),y) +TARGET_CROSS=$(call qstrip,$(BR2_TOOLCHAIN_EXTERNAL_PATH))/bin/$(call qstrip,$(BR2_TOOLCHAIN_EXTERNAL_PREFIX))- +STAGING_DIR := $(shell $(TARGET_CC) --print-sysroot) +endif + ifeq ($(BR2_CCACHE),y) TARGET_CC := $(CCACHE) $(TARGET_CC) TARGET_CXX := $(CCACHE) $(TARGET_CXX)
toolchain/helpers.mk +7 -0
@@ -81,6 +81,10 @@ \ echo -n +ifeq ($(BR2_TOOLCHAIN_COPY_LIBS_INTO_TOOLCHAIN),y) + copy_toolchain_lib_root := echo "Not doing copy toolchain" ; exit ; $(copy_toolchain_lib_root) +endif + # # Copy the full external toolchain sysroot directory to the staging # dir. The operation of this function is rendered a little bit
@@ -160,6 +164,9 @@ fi ; \ find $(STAGING_DIR) -type d | xargs chmod 755 +ifeq ($(BR2_TOOLCHAIN_COPY_LIBS_INTO_TOOLCHAIN),y) + copy_toolchain_sysroot := echo "Not doing a copy" ; exit ; $(copy_toolchain_sysroot) +endif # # Check the availability of a particular glibc feature. This function # is used to check toolchain options that are always supported by
toolchain/toolchain-external/Config.in +9 -0
@@ -948,6 +948,15 @@ here, separated by spaces. They will be copied to the target's /lib directory. +config BR2_TOOLCHAIN_COPY_LIBS_INTO_TOOLCHAIN + bool "Copy Libraries from Buildroot into toolchain sysroot" + help + Select this option if you want to have Buildroot copy + the generated libraries you have selected into the + External toolchain. This is useful if you want to make + a fully loaded toolchain (with no external sysroot) for + building standalone applications outside of Buildroot. + endif # BR2_TOOLCHAIN_EXTERNAL_CUSTOM config BR2_TOOLCHAIN_EXTERNAL_GDB_SERVER_COPY
PATCH 1/1 Allow Buildroot to update toolchain
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"ANDY" == ANDY KENNEDY <[email protected]> writes:
ANDY> Sometimes it is useful to self contain a toolchain. To do this, one ANDY> must somehow build in the extra libraries needed to make the toolchain ANDY> complete. This patch adjusts Buildroot to, by configuration, modify the ANDY> external toolchain while building additional libraries.
I'm not sure I understand the use case here. How is it different that setting BR2_HOST_DIR to something, do a build and then use the toolchain in BR2_HOST_DIR/usr/bin outside buildroot?
Signature · 1 line
Bye, Peter Korsgaard
PATCH 1/1 Allow Buildroot to update toolchain
Quoted 9 lines
-----Original Message-----
From: Peter Korsgaard [mailto:jacmet at gmail.com] On Behalf Of Peter Korsgaard
Sent: Thursday, September 26, 2013 3:28 PM
To: ANDY KENNEDY
Cc: 'buildroot at busybox.net'
Subject: Re: [PATCH] Allow Buildroot to update toolchainQuoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"ANDY" == ANDY KENNEDY <[email protected]> writes:
Quoted 8 lines
ANDY> Sometimes it is useful to self contain a toolchain. To do this, one ANDY> must somehow build in the extra libraries needed to make the toolchain ANDY> complete. This patch adjusts Buildroot to, by configuration, modify the ANDY> external toolchain while building additional libraries.
I'm not sure I understand the use case here. How is it different that setting
BR2_HOST_DIRto something, do a build and then use the toolchain in BR2_HOST_DIR/usr/bin outside buildroot?
Oh, my bad. I mean for when one uses an external toolchain. For example:
I build a toolchain using Crosstool-NG. I have a few libraries in there, but to fully use this as a cross compiler I need things like ncurses, pcap, lttng, etc. In this case, I would either need to have some sort of SYSROOT configured. It is not always desirable to have those two items disjoined. So, I dump my additional libraries into the toolchain.
I've been carrying this patch along for a long time now (3 years +), but I thought maybe someone else would like the ability to do so as well.
I'm sure I haven't done the description in the Config.in file justice. I toyed with the idea of make some comment that shows up if this is selected to warn of what the person was actually doing, but I thought better of it.
Another concern I have is that, if one builds using an external toolchain and does a 'make allyesconfig' then this option would also be selected, thereby polluting their original toolchain.
I dunno, if you don't like this, I'll continue to drag it along outside of BR.
Andy
PATCH 1/1 Allow Buildroot to update toolchain
Dear ANDY KENNEDY,
Quoted 9 lines · ANDY KENNEDY
Oh, my bad. I mean for when one uses an external toolchain. For example:
I build a toolchain using Crosstool-NG. I have a few libraries in there, but to fully use this as a cross compiler I need things like ncurses, pcap, lttng, etc. In this case, I would either need to have some sort of SYSROOT configured. It is not always desirable to have those two items disjoined. So, I dump my additional libraries into the toolchain.
I still don't understand. What you're explaining is exactly what Buildroot is doing today. When you use an external toolchain, Buildroot copies the toolchain sysroot (which contains just the C library) in output/staging and then progressively "improves" this sysroot by adding all the libraries that have been cross-compiled for your target.
If what you need is then the ability to deliver this toolchain to application developers who will not be using Buildroot, but need a toolchain with all the libraries, then the proper way to do this is, as Peter suggested, to do BR2_HOST_DIR=/opt/some-location/, then do your Buildroot build, tarball /opt/some-location/ and deliver that as the toolchain to be used by your application developers.
Or maybe I misunderstanding the use case?
Best regards,
Thomas
Signature · 3 lines
Thomas Petazzoni, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com
PATCH 1/1 Allow Buildroot to update toolchain
Quoted 6 lines
I still don't understand. What you're explaining is exactly what Buildroot is doing today. When you use an external toolchain, Buildroot copies the toolchain sysroot (which contains just the C library) in output/staging and then progressively "improves" this sysroot by adding all the libraries that have been cross-compiled for your target.
Quoted 6 lines
If what you need is then the ability to deliver this toolchain to application developers who will not be using Buildroot, but need a toolchain with all the libraries, then the proper way to do this is, as Peter suggested, to do BR2_HOST_DIR=/opt/some-location/, then do your Buildroot build, tarball
/opt/some-location/and deliver that as the toolchain to be used by your application developers.
Oh, really? I totally missed that then. I remember when that came out (like last year sometime, right?) but I didn't really look into it that much.
Well, cool! I guess I reinvented the wheel on this one, eh?
I guess I'll try your way then and see what happens ;).
If it works exactly as what I'm doing that's cool!
Quoted 2 lines
Or maybe I misunderstanding the use case?
Um, yeah, that's it. It isn't that I'm goofy or anything ;).
Andy
PATCH 1/1 Allow Buildroot to update toolchain
In reply to Thomas PetazzoniQuoted 6 lines
I still don't understand. What you're explaining is exactly what Buildroot is doing today. When you use an external toolchain, Buildroot copies the toolchain sysroot (which contains just the C library) in output/staging and then progressively "improves" this sysroot by adding all the libraries that have been cross-compiled for your target.
Quoted 6 lines
If what you need is then the ability to deliver this toolchain to application developers who will not be using Buildroot, but need a toolchain with all the libraries, then the proper way to do this is, as Peter suggested, to do BR2_HOST_DIR=/opt/some-location/, then do your Buildroot build, tarball
/opt/some-location/and deliver that as the toolchain to be used by your application developers.
Thomas/Peter/all:
The following blurb (from the help menu) doesn't really say what you said above:
Directory to store all the binary files that are built for the host. This includes the cross compilation toolchain when building the internal buildroot toolchain.
What the above says to me is that aclocal, automake, bison, flex, etc will end up in my toolchain. I don't really want this.
Now, if using an external toolchain changes this statement to what you said "then progressively "improves" this sysroot by adding all the libraries that have been cross-compiled for your target." without making a bunch of additional build tools in there (which won't really be needed in the follow-on builds by developers not using Buildroot), then we probably need to specify this. Otherwise, my patch ONLY updates the sysroot and does not dump a bunch of library compile time junk into the toolchain (never to be used again).
Andy
PATCH 1/1 Allow Buildroot to update toolchain
Quoted 25 lines
Quoted 6 lines
I still don't understand. What you're explaining is exactly what Buildroot is doing today. When you use an external toolchain, Buildroot copies the toolchain sysroot (which contains just the C library) in output/staging and then progressively "improves" this sysroot by adding all the libraries that have been cross-compiled for your target.
Quoted 6 lines
If what you need is then the ability to deliver this toolchain to application developers who will not be using Buildroot, but need a toolchain with all the libraries, then the proper way to do this is, as Peter suggested, to do BR2_HOST_DIR=/opt/some-location/, then do your Buildroot build, tarball
/opt/some-location/and deliver that as the toolchain to be used by your application developers.Thomas/Peter/all:
The following blurb (from the help menu) doesn't really say what you said above:
Directory to store all the binary files that are built for the host. This includes the cross compilation toolchain when building the internal buildroot toolchain.
What the above says to me is that aclocal, automake, bison, flex, etc will end up in my toolchain. I don't really want this.
Quoted 10 lines
Now, if using an external toolchain changes this statement to what you said "then progressively "improves" this sysroot by adding all the libraries that have been cross-compiled for your target." without making a bunch of additional build tools in there (which won't really be needed in the follow-on builds by developers not using Buildroot), then we probably need to specify this. Otherwise, my patch ONLY updates the sysroot and does not dump a bunch of library compile time junk into the toolchain (never to be used again).
Okay, I see the difference between my patch and what HOST_DIR does. When using HOST_DIR, the normal location of output/host is redirected to /opt/somedir then the toolchain, all existing libs, all buildroot built libs get dumped into that location.
In my patch, I have made this assumption: The user already has a toolchain in /opt/somedir/mytoolchain and desires to keep that location. After looking at what the code does, I don't really think that I can specify the SAME location for HOST_DIR as it would attempt to copy files onto itself (which would then, presumably, error out). In the case of using the SYSROOT as the staging directory, ONLY the libraries get copied back to the toolchain's sysroot (and the really nice thing about this is that the user never has to tell me where to put the stuff, I asked the toolchain for the sysroot dir).
So, as I stated before, I'll keep dragging this patch around if you don't want to include it into Buildroot, but I believe this may be something that others would like to use. But, I've been wrong MANY times before ;).
Andy
PATCH 1/1 Allow Buildroot to update toolchain
Dear ANDY KENNEDY,
Quoted 15 lines · ANDY KENNEDY
Okay, I see the difference between my patch and what
HOST_DIRdoes. When usingHOST_DIR, the normal location of output/host is redirected to/opt/somedirthen the toolchain, all existing libs, all buildroot built libs get dumped into that location.In my patch, I have made this assumption: The user already has a toolchain in
/opt/somedir/mytoolchainand desires to keep that location. After looking at what the code does, I don't really think that I can specify the SAME location forHOST_DIRas it would attempt to copy files onto itself (which would then, presumably, error out). In the case of using the SYSROOT as the staging directory, ONLY the libraries get copied back to the toolchain's sysroot (and the really nice thing about this is that the user never has to tell me where to put the stuff, I asked the toolchain for the sysroot dir).
Quoted 4 lines
So, as I stated before, I'll keep dragging this patch around if you don't want to include it into Buildroot, but I believe this may be something that others would like to use. But, I've been wrong MANY times before ;).
I still don't quite understand your use case. If you don't use BR2_HOST_DIR=/opt/someplace/ and keep telling your users to use their original toolchain, they have to pass many options to the compiler and linker to point to the right library locations. They also don't have access to the right pkg-config that works in cross-compilation mode that Buildroot has built.
I *really* believe you should have a deeper look at what it means to specify a custom BR2_HOST_DIR, I think it's really what you should be using.
Best regards,
Thomas
Signature · 3 lines
Thomas Petazzoni, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com
PATCH 1/1 Allow Buildroot to update toolchain
Offline, no need to clutter the list. . .
(Well, it was off-line, but Thomas refused to answer this without it being posted to the list, so, sorry for the clutter).
Quoted 6 lines
I still don't quite understand your use case. If you don't use BR2_HOST_DIR=/opt/someplace/ and keep telling your users to use their original toolchain, they have to pass many options to the compiler and linker to point to the right library locations. They also don't have access to the right pkg-config that works in cross-compilation mode that Buildroot has built.
Never have I had a problem using the libraries that I build into the toolchain using this same procedure. I have been doing this patch for 3+ years (I think it is actually going on 5 years now, with a couple of revisions to the patch along the way). I plug the libraries straight into the EXISTING toolchain's sysroot. Viola! I have my original toolchain location with a set of libraries the toolchain automagically finds based on the fact that all these libs are sitting right in the same location as the other libs (that originally were built by crosstool-ng).
Quoted 4 lines
I *really* believe you should have a deeper look at what it means to specify a custom
BR2_HOST_DIR, I think it's really what you should be using.
You assume too much. I did try it. I didn't like that additional crap that was put in the host directory. I don't need flex, bison, yacc, make, automake, autoconf, etc in my toolchain. I just don't need that. That takes up too much space on our servers when it is far better to use the patch I sent.
Perhaps you should attempt my patch once (using it in the prescribed method) to see the difference yourself. What I did was to build the original toolchain using Crosstool-NG, tar that up, then use that tarball as the starting point. After this, I built two versions of the toolchain. The first I started by using the unmodified 2013.08.1 Buildroot code. After it was completed, I moved the two toolchains to another directory (for safe keepings) untarred the toolchain again and did another build (starting from a clean Buildroot directory, then applying my patch) and build again using the same configuration but setting HOST_DIR back to $(BUILD_DIR)/host and setting the new configuration option (using menuconfig -- I'm lazy) BR2_TOOLCHAIN_COPY_LIBS_INTO_TOOLCHAIN to yes.
On the HOST_DIR side of the house, you end up with two directories that contain most the same information, however, there are additional binaries for the libs, header applications for <gcc family>, <binutils family>, etc. All in all, I ended up with (the combined two directories) with about 283% the size of the original toolchain.
Using my method, I ended up with a directory with about 255% of the original size.
/opt/toolchains# ls
myway/ orig/ powerpc-unknown-linux-gnuspe/ powerpc-unknown-linux-gnuspe-testing.tar yourway/ /opt/toolchains# du -s yourway myway orig
1098948 yourway
991592 myway
387772 orig
/opt/toolchains# ls myway/ yourway/ orig/
myway/:
powerpc-unknown-linux-gnuspe-testing/
orig/:
powerpc-unknown-linux-gnuspe-testing/
yourway/:
buildroot-toolchain/ powerpc-unknown-linux-gnuspe-testing/
Now do you understand the difference between the two patches?
As far as a different use case, the only thing I can say is that I build stuff into the original sysroot of the toolchain, such that the toolchain KNOWS where the libs are, knows where the includes are, etc without the aid of any additional support utilities. Whether this is beneficial to you or the rest of the world, I cannot say. It is, however, beneficial to me.
BTW, MAN!!! Ya'll really pound on me with every patch I push back up, don't you! If I wasn't so dedicated to furthering Linux I'd probably abandon ship with this whole "push stuff back" idea.
Andy
PATCH 1/1 Allow Buildroot to update toolchain
Andy,
Quoted 4 lines · ANDY KENNEDY
Offline, no need to clutter the list. . .
(Well, it was off-line, but Thomas refused to answer this without it being posted to the list, so, sorry for the clutter).
Yes, I don't see much point in having private discussions about Buildroot design decisions. The opinion of the entire community is important.
Quoted 9 lines
Quoted 6 lines
I still don't quite understand your use case. If you don't use BR2_HOST_DIR=/opt/someplace/ and keep telling your users to use their original toolchain, they have to pass many options to the compiler and linker to point to the right library locations. They also don't have access to the right pkg-config that works in cross-compilation mode that Buildroot has built.
Never have I had a problem using the libraries that I build into the toolchain using this same procedure.
That's because it works in your particular case, but it doesn't work in the general case. For example, with your solution, try to build an application which uses 'pkg-config' to discover libraries. It will fail, because you don't have $(HOST_DIR)/usr/bin/pkg-config, which Buildroot has specially compiled to make sure it points to the cross-compiled libraries and headers.
Quoted 8 lines
I have been doing this patch for
3+ years (I think it is actually going on 5 years now, with a couple of revisions to the patch along the way). I plug the libraries straight into the EXISTING toolchain's sysroot. Viola! I have my original toolchain location with a set of libraries the toolchain automagically finds based on the fact that all these libs are sitting right in the same location as the other libs (that originally were built by crosstool-ng).
Again, that all works when you consider a toolchain as being just the cross-compiler (and its related linker, assembler, etc.) and the headers/libraries.
Most build systems, including Buildroot, consider that what we should provide to application developers is actually a SDK: it's not only a toolchain, but also a set of tools compiled for the host that are useful during the cross-compilation process of various components. pkg-config was mentioned above, but even having a version of autoconf, automake and libtool that is the same for all developers is a really nice feature. I've worked for customers that were using Buildroot, and it was definitely a clear feature that Buildroot provides its own version of automake, autoconf, libtool, pkg-config and other host tools, since it ensures all the application developers rely on the same version of those tools.
Quoted 9 lines
Quoted 3 lines
I *really* believe you should have a deeper look at what it means to specify a custom
BR2_HOST_DIR, I think it's really what you should be using.You assume too much. I did try it. I didn't like that additional crap that was put in the host directory. I don't need flex, bison, yacc, make, automake, autoconf, etc in my toolchain. I just don't need that. That takes up too much space on our servers when it is far better to use the patch I sent.
See the above explanation.
Quoted 4 lines
Perhaps you should attempt my patch once (using it in the prescribed method) to see the difference yourself. What I did was to build the original toolchain using Crosstool-NG, tar that up, then use that tarball as the starting point. After this, I built two versions of
Quoted 8 lines
the toolchain. The first I started by using the unmodified 2013.08.1 Buildroot code. After it was completed, I moved the two toolchains to another directory (for safe keepings) untarred the toolchain again and did another build (starting from a clean Buildroot directory, then applying my patch) and build again using the same configuration but setting
HOST_DIRback to $(BUILD_DIR)/host and setting the new configuration option (using menuconfig -- I'm lazy)BR2_TOOLCHAIN_COPY_LIBS_INTO_TOOLCHAINto yes.
I'm not sure to follow your procedure works. But clearly, a Buildroot option that copies back the libraries into the external toolchain is not acceptable: the external toolchain is not meant to be changed by Buildroot. If you really want to do that, you can just take output/host/usr/<tuple>/sysroot and use that to replace the original toolchain sysroot.
Quoted 6 lines
On the
HOST_DIRside of the house, you end up with two directories that contain most the same information, however, there are additional binaries for the libs, header applications for <gcc family>, <binutils family>, etc. All in all, I ended up with (the combined two directories) with about 283% the size of the original toolchain.
Quoted 8 lines
Using my method, I ended up with a directory with about 255% of the original size.
/opt/toolchains# ls
myway/ orig/ powerpc-unknown-linux-gnuspe/ powerpc-unknown-linux-gnuspe-testing.tar yourway/ /opt/toolchains# du -s yourway myway orig
1098948 yourway
991592 myway
So you've saved 107 MB over 1 GB, that's about 10%. I don't see how it matches the 283% and 255% numbers you've given above.
Quoted 5 lines
387772 orig
/opt/toolchains# ls myway/ yourway/ orig/
myway/:
powerpc-unknown-linux-gnuspe-testing/
Quoted 7 lines
orig/:
powerpc-unknown-linux-gnuspe-testing/yourway/:
buildroot-toolchain/ powerpc-unknown-linux-gnuspe-testing/Now do you understand the difference between the two patches?
Which "two" patches ? You've submitted only one.
Quoted 10 lines
As far as a different use case, the only thing I can say is that I build stuff into the original sysroot of the toolchain, such that the toolchain KNOWS where the libs are, knows where the includes are, etc without the aid of any additional support utilities. Whether this is beneficial to you or the rest of the world, I cannot say. It is, however, beneficial to me.
BTW, MAN!!! Ya'll really pound on me with every patch I push back up, don't you! If I wasn't so dedicated to furthering Linux I'd probably abandon ship with this whole "push stuff back" idea.
I'm sorry if you feel this way. I believe the Buildroot community accepts a huge number of patches from various contributors. See for example the numbers I've shown at
http://free-electrons.com/blog/buildroot-community-activity/: the number of contributors is increasing significantly. I'm reviewing the patches from many other contributors, and their patches are being merged.
However, you have to understand that touching to the core mechanisms of Buildroot takes more time than getting package changes merged. This is because we're paying close attention to keep Buildroot simple, and avoid having multiple mechanisms to do the same thing, or mechanisms that serve too specific use cases that we think shouldn't be handled by Buildroot.
I personally believe that the existing Buildroot users like it because it is quite simple to understand and easy to use. If we start to accept all sorts of mechanisms without a good and sensible use case, a good coherency with the other existing mechanisms, then we will loose this simplicity, which is the core advantage of Buildroot.
Best regards,
Thomas Petazzoni
Signature · 3 lines
Thomas Petazzoni, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com
PATCH 1/1 Allow Buildroot to update toolchain
Quoted 9 lines
Quoted 2 lines
Never have I had a problem using the libraries that I build into the toolchain using this same procedure.
That's because it works in your particular case, but it doesn't work in the general case. For example, with your solution, try to build an application which uses 'pkg-config' to discover libraries. It will fail, because you don't have $(HOST_DIR)/usr/bin/pkg-config, which Buildroot has specially compiled to make sure it points to the cross-compiled libraries and headers.
Most of the time pkg-config is not needed as the code being built is proprietary and the companies that are using these don't have knowledge of how/when to use these utilities.
Quoted 13 lines
Quoted 4 lines
Perhaps you should attempt my patch once (using it in the prescribed method) to see the difference yourself. What I did was to build the original toolchain using Crosstool-NG, tar that up, then use that tarball as the starting point. After this, I built two versions of
Quoted 8 lines
the toolchain. The first I started by using the unmodified 2013.08.1 Buildroot code. After it was completed, I moved the two toolchains to another directory (for safe keepings) untarred the toolchain again and did another build (starting from a clean Buildroot directory, then applying my patch) and build again using the same configuration but setting
HOST_DIRback to $(BUILD_DIR)/host and setting the new configuration option (using menuconfig -- I'm lazy)BR2_TOOLCHAIN_COPY_LIBS_INTO_TOOLCHAINto yes.
Quoted 6 lines
I'm not sure to follow your procedure works. But clearly, a Buildroot option that copies back the libraries into the external toolchain is not acceptable: the external toolchain is not meant to be changed by Buildroot. If you really want to do that, you can just take output/host/usr/<tuple>/sysroot and use that to replace the original toolchain sysroot.
Hmmm, I'm not sure that would be exactly what I was going for, but I'd have to try it (and I don't really care at this point). Other than the size differences below, the nice to have is that the toolchain is contained in one directory. Whereas I could push the original toolchain a level deep then locate the Buildroot host dir next to it in that dir, this, I fear, would be confusing to those who consume the toolchains. I would expect the question of "which one am I supposed to use" to come back to me. Though, one could fix this by (as I do anyway) by providing a Makefile in the toolchain directory which will generate an environment shell script to "configure" the toolchain for a given shell.
But, anywho, it doesn't matter.
Quoted 7 lines
Quoted 4 lines
/opt/toolchains# du -s yourway myway orig
1098948 yourway
991592 myway
387772 origSo you've saved 107 MB over 1 GB, that's about 10%. I don't see how it matches the 283% and 255% numbers you've given above.
1098948/387772 = 2.8340055... * 100% = 283%
991592/387772 = 2.557152.... * 100% = 255% (I guess this should have been 256% with the rounding -- I truncated, my bad).
Quoted 3 lines
Quoted 1 line
Now do you understand the difference between the two patches?
Which "two" patches ? You've submitted only one.
The patch submitted about a year or two ago that moved around the HOST_DIR stuff vs the one I submitted last week.
Quoted 7 lines
However, you have to understand that touching to the core mechanisms of Buildroot takes more time than getting package changes merged. This is because we're paying close attention to keep Buildroot simple, and avoid having multiple mechanisms to do the same thing, or mechanisms that serve too specific use cases that we think shouldn't be handled by Buildroot.
Quoted 5 lines
I personally believe that the existing Buildroot users like it because it is quite simple to understand and easy to use. If we start to accept all sorts of mechanisms without a good and sensible use case, a good coherency with the other existing mechanisms, then we will loose this simplicity, which is the core advantage of Buildroot.
One cannot argue with the principles presented here. The application of such principles are where I have differing views.
As far as this patch goes, if all within the Buildroot community are vehemently against such a patch, so be it. I will not blow against the wind.
::enter drama queen mode::
Defeated,
::exit drama queen mode::
Andy