Bluetooth: Provide high speed configuration option
Subsystems (2)
Marcel Holtmann
maintainerPATCH 3/3 Bluetooth: Provide high speed configuration option
Hiding the Bluetooth high speed support behind a module parameter is not really useful. This can be enabled and disabled at runtime via the management interface. This also has the advantage that his can now be changed per controller and not just global.
This patch removes the module parameter and exposes the high speed setting of the management interface to all controllers.
--- include/net/bluetooth/l2cap.h | 1 + net/bluetooth/hci_core.c | 6 ------ net/bluetooth/l2cap_core.c | 35 +++++++++++++++++++---------------- net/bluetooth/l2cap_sock.c | 10 ---------- net/bluetooth/mgmt.c | 11 ++--------- 5 files changed, 22 insertions(+), 41 deletions(-)
include/net/bluetooth/l2cap.h +1 -0
@@ -564,6 +564,7 @@ struct l2cap_conn {__u32 feat_mask;__u8 fixed_chan_mask; +bool hs_enabled;__u8 info_state;__u8 info_ident;
net/bluetooth/hci_core.c +0 -6
@@ -1222,12 +1222,6 @@ int hci_dev_open(__u16 dev) ret = hdev->setup (hdev);if (!ret) { -/* Treat all non BR/EDR controllers as raw devices if -* enable_hs is not set. -*/ -if (hdev->dev_type !=HCI_BREDR && !enable_hs) -set_bit (HCI_RAW , &hdev->flags); -if (test_bit (HCI_QUIRK_RAW_DEVICE , &hdev->quirks))set_bit (HCI_RAW , &hdev->flags);
net/bluetooth/l2cap_core.c +19 -16
@@ -1016,13 +1016,12 @@ static bool __amp_capable(struct l2cap_chan *chan) {struct l2cap_conn *conn = chan->conn; -if (enable_hs && -hci_amp_capable () && +if (conn->hs_enabled &&hci_amp_capable () && chan->chan_policy ==BT_CHANNEL_POLICY_AMP_PREFERRED && conn->fixed_chan_mask &L2CAP_FC_A2MP )return true; -else -return false; + +return false; }static bool l2cap_check_efs (struct l2cap_chan *chan)
@@ -1638,6 +1637,10 @@ static struct l2cap_conn *l2cap_conn_add(struct hci_conn *hcon) conn->feat_mask =0 ; +if (hcon->type ==ACL_LINK ) + conn->hs_enabled =test_bit (HCI_HS_ENABLED , + &hcon->hdev->dev_flags); +spin_lock_init (&conn->lock);mutex_init (&conn->chan_lock);
@@ -3084,14 +3087,14 @@ static inline __u8 l2cap_select_mode(__u8 mode, __u16 remote_feat_mask) } } -static inline bool __l2cap_ews_supported (struct l2cap_chan *chan) +static inline bool __l2cap_ews_supported (struct l2cap_conn *conn) { -return enable_hs && chan->conn->feat_mask &L2CAP_FEAT_EXT_WINDOW ; +return conn->hs_enabled && conn->feat_mask &L2CAP_FEAT_EXT_WINDOW ; } -static inline bool __l2cap_efs_supported (struct l2cap_chan *chan) +static inline bool __l2cap_efs_supported (struct l2cap_conn *conn) { -return enable_hs && chan->conn->feat_mask &L2CAP_FEAT_EXT_FLOW ; +return conn->hs_enabled && conn->feat_mask &L2CAP_FEAT_EXT_FLOW ; } static void __l2cap_set_ertm_timeouts(struct l2cap_chan *chan,
@@ -3135,7 +3138,7 @@ static void __l2cap_set_ertm_timeouts(struct l2cap_chan *chan,static inline void l2cap_txwin_setup (struct l2cap_chan *chan) {if (chan->tx_win >L2CAP_DEFAULT_TX_WINDOW && -__l2cap_ews_supported (chan)) { +__l2cap_ews_supported (chan->conn)) {/* use extended control field */ set_bit (FLAG_EXT_CTRL , &chan->flags); chan->tx_win_max =L2CAP_DEFAULT_EXT_WINDOW ;
@@ -3165,7 +3168,7 @@ static int l2cap_build_conf_req(struct l2cap_chan *chan, void *data)if (test_bit (CONF_STATE2_DEVICE , &chan->conf_state))break ; -if (__l2cap_efs_supported (chan)) +if (__l2cap_efs_supported (chan->conn))set_bit (FLAG_EFS_ENABLE , &chan->flags);/* fall through */
@@ -3317,7 +3320,7 @@ static int l2cap_parse_conf_req(struct l2cap_chan *chan, void *data)break ;case L2CAP_CONF_EWS : -if (!enable_hs) +if (!chan->conn->hs_enabled)return -ECONNREFUSED ;set_bit (FLAG_EXT_CTRL , &chan->flags);
@@ -3349,7 +3352,7 @@ static int l2cap_parse_conf_req(struct l2cap_chan *chan, void *data) }if (remote_efs) { -if (__l2cap_efs_supported (chan)) +if (__l2cap_efs_supported (chan->conn))set_bit (FLAG_EFS_ENABLE , &chan->flags);else return -ECONNREFUSED ;
@@ -4303,7 +4306,7 @@ static inline int l2cap_information_req(struct l2cap_conn *conn,if (!disable_ertm) feat_mask |=L2CAP_FEAT_ERTM |L2CAP_FEAT_STREAMING |L2CAP_FEAT_FCS ; -if (enable_hs) +if (conn->hs_enabled) feat_mask |=L2CAP_FEAT_EXT_FLOW |L2CAP_FEAT_EXT_WINDOW ;
@@ -4314,7 +4317,7 @@ static inline int l2cap_information_req(struct l2cap_conn *conn,u8 buf[12 ];struct l2cap_info_rsp *rsp = (struct l2cap_info_rsp *) buf; -if (enable_hs) +if (conn->hs_enabled) l2cap_fixed_chan[0 ] |=L2CAP_FC_A2MP ;else l2cap_fixed_chan[0 ] &= ~L2CAP_FC_A2MP ;
@@ -4411,7 +4414,7 @@ static int l2cap_create_channel_req(struct l2cap_conn *conn,if (cmd_len !=sizeof (*req))return -EPROTO ; -if (!enable_hs) +if (!conn->hs_enabled)return -EINVAL ; psm =le16_to_cpu (req->psm);
@@ -4838,7 +4841,7 @@ static inline int l2cap_move_channel_req(struct l2cap_conn *conn,BT_DBG ("icid 0x%4.4x, dest_amp_id %d" , icid, req->dest_amp_id); -if (!enable_hs) +if (!conn->hs_enabled)return -EINVAL ; chan =l2cap_get_chan_by_dcid (conn, icid);
net/bluetooth/l2cap_sock.c +0 -10
@@ -445,11 +445,6 @@ static int l2cap_sock_getsockopt(struct socket *sock, int level, int optname,break ;case BT_CHANNEL_POLICY : -if (!enable_hs) { - err = -ENOPROTOOPT ; -break ; - } -if (put_user (chan->chan_policy, (u32 __user *) optval)) err = -EFAULT ;break ;
@@ -720,11 +715,6 @@ static int l2cap_sock_setsockopt(struct socket *sock, int level, int optname,break ;case BT_CHANNEL_POLICY : -if (!enable_hs) { - err = -ENOPROTOOPT ; -break ; - } -if (get_user (opt, (u32 __user *) optval)) { err = -EFAULT ;break ;
net/bluetooth/mgmt.c +2 -9
@@ -32,8 +32,6 @@#include <net/bluetooth/mgmt.h> #include <net/bluetooth/smp.h> -bool enable_hs; -#define MGMT_VERSION 1#define MGMT_REVISION 3
@@ -380,10 +378,8 @@ static u32 get_supported_settings(struct hci_dev *hdev) settings |=MGMT_SETTING_DISCOVERABLE ; settings |=MGMT_SETTING_BREDR ; settings |=MGMT_SETTING_LINK_SECURITY ; - } - -if (enable_hs) settings |=MGMT_SETTING_HS ; + }if (lmp_le_capable (hdev)) { settings |=MGMT_SETTING_LE ;
@@ -1344,7 +1340,7 @@ static int set_hs(struct sock *sk, struct hci_dev *hdev, void *data, u16 len)BT_DBG ("request for %s" , hdev->name); -if (!enable_hs) +if (!lmp_bredr_capable (hdev))return cmd_status (sk, hdev->id,MGMT_OP_SET_HS ,MGMT_STATUS_NOT_SUPPORTED );
@@ -4396,6 +4392,3 @@ int mgmt_device_unblocked(struct hci_dev *hdev, bdaddr_t *bdaddr, u8 type)return mgmt_event (MGMT_EV_DEVICE_UNBLOCKED , hdev, &ev,sizeof (ev), cmd ? cmd->sk :NULL ); } - -module_param (enable_hs, bool,0644 ); -MODULE_PARM_DESC (enable_hs,"Enable High Speed support" );
Signature · 1 line
1.8.3.1
Hi Marcel,
Quoted 3 lines · Marcel Holtmann
Hiding the Bluetooth high speed support behind a module parameter is not really useful. This can be enabled and disabled at runtime via the management interface. This also has the advantage that his can
typo here.
...
net/bluetooth/l2cap_sock.c static int l2cap_sock_getsockopt(struct socket *sock, int level, int optname, · line 452
Quoted 13 lines
net/bluetooth/l2cap_sock.c +0
-5@@ -445,11 +445,6 @@ static int l2cap_sock_getsockopt(struct socket *sock, int level, int optname,break ;case BT_CHANNEL_POLICY : -if (!enable_hs) { - err = -ENOPROTOOPT ; -break ; - } -
Do you think we don't need to check that HS is enabled here and below?
Quoted 5 lines
net/bluetooth/l2cap_sock.c +0
-0if (put_user (chan->chan_policy, (u32 __user *) optval)) err = -EFAULT ;break ;@@ -720,11 +715,6 @@ static int l2cap_sock_setsockopt(struct socket *sock, int level, int optname,break ;
net/bluetooth/l2cap_sock.c static int l2cap_sock_setsockopt(struct socket *sock, int level, int optname, · line 720
Quoted 10 lines
net/bluetooth/l2cap_sock.c +0
-5case BT_CHANNEL_POLICY : -if (!enable_hs) { - err = -ENOPROTOOPT ; -break ; - } -if (get_user (opt, (u32 __user *) optval)) { err = -EFAULT ;break ;
...
Best regards
Andrei Emeltchenko
Marcel Holtmann
maintainerHi Andrei,
Quoted 7 lines
Quoted 3 lines
Hiding the Bluetooth high speed support behind a module parameter is not really useful. This can be enabled and disabled at runtime via the management interface. This also has the advantage that his can
typo here.
…
the maintainer can fix that one up.
Quoted 7 lines
Quoted 7 lines
net/bluetooth/l2cap_sock.c +0
-0@@ -445,11 +445,6 @@ static int l2cap_sock_getsockopt(struct socket *sock, int level, int optname,break ;
Quoted 8 lines
net/bluetooth/l2cap_sock.c static int l2cap_sock_getsockopt(struct socket *sock, int level, int optname, · line 452
Quoted 6 lines
net/bluetooth/l2cap_sock.c +0
-5case BT_CHANNEL_POLICY : -if (!enable_hs) { - err = -ENOPROTOOPT ; -break ; - } -Do you think we don't need to check that HS is enabled here and below?
We can not. The socket might not be bound or the controller does not exists. So we have no way of knowing.
It should also work no matter what. The presence of an AMP controller is optional. That is why the policy is defined as BREDR_ONLY, BREDR_PREFERRED and AMP_PREFERRED. You can not force the AMP transport.
Regards
Marcel
Hi Marcel,
Quoted 8 lines · Marcel Holtmann
Hiding the Bluetooth high speed support behind a module parameter is not really useful. This can be enabled and disabled at runtime via the management interface. This also has the advantage that his can now be changed per controller and not just global.
This patch removes the module parameter and exposes the high speed setting of the management interface to all controllers.
Quoted 8 lines
Signed-off-by Marcel Holtmann <[email protected]>--- include/net/bluetooth/l2cap.h | 1 + net/bluetooth/hci_core.c | 6 ------ net/bluetooth/l2cap_core.c | 35 +++++++++++++++++++---------------- net/bluetooth/l2cap_sock.c | 10 ---------- net/bluetooth/mgmt.c | 11 ++--------- 5 files changed, 22 insertions(+), 41 deletions(-)
Johan