Skip to contentSkip to conversation

fix unsafe set_memory_rw from softirq

PATCH Superseded Alexei Starovoitov 4 participants 7 messages Oct 4, 2013

Subsystems (15)

v3 of 4 Superseded Latest is v4 →

lore
Share & tools
lore
#0 lore raw

PATCH v3 1/1 fix unsafe set_memory_rw from softirq

on x86 system with net.core.bpf_jit_enable = 1

sudo tcpdump -i eth1 'tcp port 22'

causes the warning:

[   56.766097]  Possible unsafe locking scenario:
[   56.766097]
[   56.780146]        CPU0
[   56.786807]        ----
[   56.793188]   lock(&(&vb->lock)->rlock);
[   56.799593]   <Interrupt>
[   56.805889]     lock(&(&vb->lock)->rlock);
[   56.812266]
[   56.812266]  *** DEADLOCK ***
[   56.812266]
[   56.830670] 1 lock held by ksoftirqd/1/13:
[   56.836838]  #0:  (rcu_read_lock){.+.+..}, at: [<ffffffff8118f44c>] vm_unmap_aliases+0x8c/0x380
[   56.849757]
[   56.849757] stack backtrace:
[   56.862194] CPU: 1 PID: 13 Comm: ksoftirqd/1 Not tainted 3.12.0-rc3+ #45
[   56.868721] Hardware name: System manufacturer System Product Name/P8Z77 WS, BIOS 3007 07/26/2012
[   56.882004]  ffffffff821944c0 ffff88080bbdb8c8 ffffffff8175a145 0000000000000007
[   56.895630]  ffff88080bbd5f40 ffff88080bbdb928 ffffffff81755b14 0000000000000001
[   56.909313]  ffff880800000001 ffff880800000000 ffffffff8101178f 0000000000000001
[   56.923006] Call Trace:
[   56.929532]  [<ffffffff8175a145>] dump_stack+0x55/0x76
[   56.936067]  [<ffffffff81755b14>] print_usage_bug+0x1f7/0x208
[   56.942445]  [<ffffffff8101178f>] ? save_stack_trace+0x2f/0x50
[   56.948932]  [<ffffffff810cc0a0>] ? check_usage_backwards+0x150/0x150
[   56.955470]  [<ffffffff810ccb52>] mark_lock+0x282/0x2c0
[   56.961945]  [<ffffffff810ccfed>] __lock_acquire+0x45d/0x1d50
[   56.968474]  [<ffffffff810cce6e>] ? __lock_acquire+0x2de/0x1d50
[   56.975140]  [<ffffffff81393bf5>] ? cpumask_next_and+0x55/0x90
[   56.981942]  [<ffffffff810cef72>] lock_acquire+0x92/0x1d0
[   56.988745]  [<ffffffff8118f52a>] ? vm_unmap_aliases+0x16a/0x380
[   56.995619]  [<ffffffff817628f1>] _raw_spin_lock+0x41/0x50
[   57.002493]  [<ffffffff8118f52a>] ? vm_unmap_aliases+0x16a/0x380
[   57.009447]  [<ffffffff8118f52a>] vm_unmap_aliases+0x16a/0x380
[   57.016477]  [<ffffffff8118f44c>] ? vm_unmap_aliases+0x8c/0x380
[   57.023607]  [<ffffffff810436b0>] change_page_attr_set_clr+0xc0/0x460
[   57.030818]  [<ffffffff810cfb8d>] ? trace_hardirqs_on+0xd/0x10
[   57.037896]  [<ffffffff811a8330>] ? kmem_cache_free+0xb0/0x2b0
[   57.044789]  [<ffffffff811b59c3>] ? free_object_rcu+0x93/0xa0
[   57.051720]  [<ffffffff81043d9f>] set_memory_rw+0x2f/0x40
[   57.058727]  [<ffffffff8104e17c>] bpf_jit_free+0x2c/0x40
[   57.065577]  [<ffffffff81642cba>] sk_filter_release_rcu+0x1a/0x30
[   57.072338]  [<ffffffff811108e2>] rcu_process_callbacks+0x202/0x7c0
[   57.078962]  [<ffffffff81057f17>] __do_softirq+0xf7/0x3f0
[   57.085373]  [<ffffffff81058245>] run_ksoftirqd+0x35/0x70

cannot reuse jited filter memory, since it's readonly, so use original bpf insns memory to hold work_struct

defer kfree of sk_filter until jit completed freeing

tested on x86_64 and i386

---
 arch/arm/net/bpf_jit_32.c       |    1 +
 arch/powerpc/net/bpf_jit_comp.c |    1 +
 arch/s390/net/bpf_jit_comp.c    |    4 +++-
 arch/sparc/net/bpf_jit_comp.c   |    1 +
 arch/x86/net/bpf_jit_comp.c     |   20 +++++++++++++++-----
 include/linux/filter.h          |   11 +++++++++--
 net/core/filter.c               |   11 +++++++----
 7 files changed, 37 insertions(+), 12 deletions(-)
arch/arm/net/bpf_jit_32.c +1 -0
index f50d223..99b44e0 100644
@@ -930,4 +930,5 @@ void bpf_jit_free(struct sk_filter *fp)
 {
 	if (fp->bpf_func != sk_run_filter)
 		module_free(NULL, fp->bpf_func);
+	kfree(fp);
 }
arch/powerpc/net/bpf_jit_comp.c +1 -0
index bf56e33..2345bdb 100644
@@ -691,4 +691,5 @@ void bpf_jit_free(struct sk_filter *fp)
 {
 	if (fp->bpf_func != sk_run_filter)
 		module_free(NULL, fp->bpf_func);
+	kfree(fp);
 }
arch/s390/net/bpf_jit_comp.c +3 -1
index 7092392..a5df511 100644
@@ -881,7 +881,9 @@ void bpf_jit_free(struct sk_filter *fp)
 	struct bpf_binary_header *header = (void *)addr;
 
 	if (fp->bpf_func == sk_run_filter)
-		return;
+		goto free_filter;
 	set_memory_rw(addr, header->pages);
 	module_free(NULL, header);
+free_filter:
+	kfree(fp);
 }
arch/sparc/net/bpf_jit_comp.c +1 -0
index 9c7be59..218b6b2 100644
@@ -808,4 +808,5 @@ void bpf_jit_free(struct sk_filter *fp)
 {
 	if (fp->bpf_func != sk_run_filter)
 		module_free(NULL, fp->bpf_func);
+	kfree(fp);
 }
arch/x86/net/bpf_jit_comp.c +15 -5
index 79c216a..1396a0a 100644
@@ -772,13 +772,23 @@ out:
 	return;
 }
 
+static void bpf_jit_free_deferred(struct work_struct *work)
+{
+	struct sk_filter *fp = container_of((void *)work, struct sk_filter,
+					    insns);
+	unsigned long addr = (unsigned long)fp->bpf_func & PAGE_MASK;
+	struct bpf_binary_header *header = (void *)addr;
+
+	set_memory_rw(addr, header->pages);
+	module_free(NULL, header);
+	kfree(fp);
+}
+
 void bpf_jit_free(struct sk_filter *fp)
 {
 	if (fp->bpf_func != sk_run_filter) {
-		unsigned long addr = (unsigned long)fp->bpf_func & PAGE_MASK;
-		struct bpf_binary_header *header = (void *)addr;
-
-		set_memory_rw(addr, header->pages);
-		module_free(NULL, header);
+		struct work_struct *work = (struct work_struct *)fp->insns;
+		INIT_WORK(work, bpf_jit_free_deferred);
+		schedule_work(work);
 	}
 }
include/linux/filter.h +9 -2
index a6ac848..5d66cd9 100644
@@ -25,15 +25,20 @@ struct sk_filter
 {
 	atomic_t		refcnt;
 	unsigned int         	len;	/* Number of filter blocks */
+	struct rcu_head		rcu;
 	unsigned int		(*bpf_func)(const struct sk_buff *skb,
 					    const struct sock_filter *filter);
-	struct rcu_head		rcu;
+	/* insns start right after bpf_func, so that sk_run_filter() fetches
+	 * first insn from the same cache line that was used to call into
+	 * sk_run_filter()
+	 */
 	struct sock_filter     	insns[0];
 };
 
 static inline unsigned int sk_filter_len(const struct sk_filter *fp)
 {
-	return fp->len * sizeof(struct sock_filter) + sizeof(*fp);
+	return max(fp->len * sizeof(struct sock_filter),
+		   sizeof(struct work_struct)) + sizeof(*fp);
 }
 
 extern int sk_filter(struct sock *sk, struct sk_buff *skb);
@@ -67,11 +72,13 @@ static inline void bpf_jit_dump(unsigned int flen, unsigned int proglen,
 }
 #define SK_RUN_FILTER(FILTER, SKB) (*FILTER->bpf_func)(SKB, FILTER->insns)
 #else
+#include <linux/slab.h>
 static inline void bpf_jit_compile(struct sk_filter *fp)
 {
 }
 static inline void bpf_jit_free(struct sk_filter *fp)
 {
+	kfree(fp);
 }
 #define SK_RUN_FILTER(FILTER, SKB) sk_run_filter(SKB, FILTER->insns)
 #endif
net/core/filter.c +7 -4
index 6438f29..ad5eaba 100644
@@ -644,7 +644,6 @@ void sk_filter_release_rcu(struct rcu_head *rcu)
 	struct sk_filter *fp = container_of(rcu, struct sk_filter, rcu);
 
 	bpf_jit_free(fp);
-	kfree(fp);
 }
 EXPORT_SYMBOL(sk_filter_release_rcu);
 
@@ -677,13 +676,15 @@ int sk_unattached_filter_create(struct sk_filter **pfp,
 {
 	struct sk_filter *fp;
 	unsigned int fsize = sizeof(struct sock_filter) * fprog->len;
+	unsigned int sk_fsize = max_t(u32, fsize, sizeof(struct work_struct))
+		+ sizeof(*fp);
 	int err;
 
 	/* Make sure new filter is there and in the right amounts. */
 	if (fprog->filter == NULL)
 		return -EINVAL;
 
-	fp = kmalloc(fsize + sizeof(*fp), GFP_KERNEL);
+	fp = kmalloc(sk_fsize, GFP_KERNEL);
 	if (!fp)
 		return -ENOMEM;
 	memcpy(fp->insns, fprog->filter, fsize);
@@ -723,6 +724,8 @@ int sk_attach_filter(struct sock_fprog *fprog, struct sock *sk)
 {
 	struct sk_filter *fp, *old_fp;
 	unsigned int fsize = sizeof(struct sock_filter) * fprog->len;
+	unsigned int sk_fsize = max_t(u32, fsize, sizeof(struct work_struct))
+		+ sizeof(*fp);
 	int err;
 
 	if (sock_flag(sk, SOCK_FILTER_LOCKED))
@@ -732,11 +735,11 @@ int sk_attach_filter(struct sock_fprog *fprog, struct sock *sk)
 	if (fprog->filter == NULL)
 		return -EINVAL;
 
-	fp = sock_kmalloc(sk, fsize+sizeof(*fp), GFP_KERNEL);
+	fp = sock_kmalloc(sk, sk_fsize, GFP_KERNEL);
 	if (!fp)
 		return -ENOMEM;
 	if (copy_from_user(fp->insns, fprog->filter, fsize)) {
-		sock_kfree_s(sk, fp, fsize+sizeof(*fp));
+		sock_kfree_s(sk, fp, sk_fsize);
 		return -EFAULT;
 	}
 
Signature · 1 line
1.7.9.5
Acked-by on v3 1/1
#1 lore raw
Quoted 5 lines · Alexei Starovoitov
arch/s390/net/bpf_jit_comp.c +0 -0
index 7092392..a5df511 100644

arch/s390/net/bpf_jit_comp.c void bpf_jit_free(struct sk_filter *fp) · line 889

Quoted 10 lines
arch/s390/net/bpf_jit_comp.c +3 -1
@@ -881,7 +881,9 @@ void bpf_jit_free(struct sk_filter *fp)
 	struct bpf_binary_header *header = (void *)addr;
 
 	if (fp->bpf_func == sk_run_filter)
-		return;
+		goto free_filter;
 	set_memory_rw(addr, header->pages);
 	module_free(NULL, header);
+free_filter:
+	kfree(fp);
 }

For the s390 part:

#2 lore raw
In reply to Alexei Starovoitov
Quoted 122 lines · Alexei Starovoitov

on x86 system with net.core.bpf_jit_enable = 1

sudo tcpdump -i eth1 'tcp port 22'

causes the warning:

[   56.766097]  Possible unsafe locking scenario:
[   56.766097]
[   56.780146]        CPU0
[   56.786807]        ----
[   56.793188]   lock(&(&vb->lock)->rlock);
[   56.799593]   <Interrupt>
[   56.805889]     lock(&(&vb->lock)->rlock);
[   56.812266]
[   56.812266]  *** DEADLOCK ***
[   56.812266]
[   56.830670] 1 lock held by ksoftirqd/1/13:
[   56.836838]  #0:  (rcu_read_lock){.+.+..}, at: [<ffffffff8118f44c>] vm_unmap_aliases+0x8c/0x380
[   56.849757]
[   56.849757] stack backtrace:
[   56.862194] CPU: 1 PID: 13 Comm: ksoftirqd/1 Not tainted 3.12.0-rc3+ #45
[   56.868721] Hardware name: System manufacturer System Product Name/P8Z77 WS, BIOS 3007 07/26/2012
[   56.882004]  ffffffff821944c0 ffff88080bbdb8c8 ffffffff8175a145 0000000000000007
[   56.895630]  ffff88080bbd5f40 ffff88080bbdb928 ffffffff81755b14 0000000000000001
[   56.909313]  ffff880800000001 ffff880800000000 ffffffff8101178f 0000000000000001
[   56.923006] Call Trace:
[   56.929532]  [<ffffffff8175a145>] dump_stack+0x55/0x76
[   56.936067]  [<ffffffff81755b14>] print_usage_bug+0x1f7/0x208
[   56.942445]  [<ffffffff8101178f>] ? save_stack_trace+0x2f/0x50
[   56.948932]  [<ffffffff810cc0a0>] ? check_usage_backwards+0x150/0x150
[   56.955470]  [<ffffffff810ccb52>] mark_lock+0x282/0x2c0
[   56.961945]  [<ffffffff810ccfed>] __lock_acquire+0x45d/0x1d50
[   56.968474]  [<ffffffff810cce6e>] ? __lock_acquire+0x2de/0x1d50
[   56.975140]  [<ffffffff81393bf5>] ? cpumask_next_and+0x55/0x90
[   56.981942]  [<ffffffff810cef72>] lock_acquire+0x92/0x1d0
[   56.988745]  [<ffffffff8118f52a>] ? vm_unmap_aliases+0x16a/0x380
[   56.995619]  [<ffffffff817628f1>] _raw_spin_lock+0x41/0x50
[   57.002493]  [<ffffffff8118f52a>] ? vm_unmap_aliases+0x16a/0x380
[   57.009447]  [<ffffffff8118f52a>] vm_unmap_aliases+0x16a/0x380
[   57.016477]  [<ffffffff8118f44c>] ? vm_unmap_aliases+0x8c/0x380
[   57.023607]  [<ffffffff810436b0>] change_page_attr_set_clr+0xc0/0x460
[   57.030818]  [<ffffffff810cfb8d>] ? trace_hardirqs_on+0xd/0x10
[   57.037896]  [<ffffffff811a8330>] ? kmem_cache_free+0xb0/0x2b0
[   57.044789]  [<ffffffff811b59c3>] ? free_object_rcu+0x93/0xa0
[   57.051720]  [<ffffffff81043d9f>] set_memory_rw+0x2f/0x40
[   57.058727]  [<ffffffff8104e17c>] bpf_jit_free+0x2c/0x40
[   57.065577]  [<ffffffff81642cba>] sk_filter_release_rcu+0x1a/0x30
[   57.072338]  [<ffffffff811108e2>] rcu_process_callbacks+0x202/0x7c0
[   57.078962]  [<ffffffff81057f17>] __do_softirq+0xf7/0x3f0
[   57.085373]  [<ffffffff81058245>] run_ksoftirqd+0x35/0x70

cannot reuse jited filter memory, since it's readonly, so use original bpf insns memory to hold work_struct

defer kfree of sk_filter until jit completed freeing

tested on x86_64 and i386

---
 arch/arm/net/bpf_jit_32.c       |    1 +
 arch/powerpc/net/bpf_jit_comp.c |    1 +
 arch/s390/net/bpf_jit_comp.c    |    4 +++-
 arch/sparc/net/bpf_jit_comp.c   |    1 +
 arch/x86/net/bpf_jit_comp.c     |   20 +++++++++++++++-----
 include/linux/filter.h          |   11 +++++++++--
 net/core/filter.c               |   11 +++++++----
 7 files changed, 37 insertions(+), 12 deletions(-)
arch/arm/net/bpf_jit_32.c +1 -0
index f50d223..99b44e0 100644
@@ -930,4 +930,5 @@ void bpf_jit_free(struct sk_filter *fp)
 {
 	if (fp->bpf_func != sk_run_filter)
 		module_free(NULL, fp->bpf_func);
+	kfree(fp);
 }
arch/powerpc/net/bpf_jit_comp.c +1 -0
index bf56e33..2345bdb 100644
@@ -691,4 +691,5 @@ void bpf_jit_free(struct sk_filter *fp)
 {
 	if (fp->bpf_func != sk_run_filter)
 		module_free(NULL, fp->bpf_func);
+	kfree(fp);
 }
arch/s390/net/bpf_jit_comp.c +3 -1
index 7092392..a5df511 100644
@@ -881,7 +881,9 @@ void bpf_jit_free(struct sk_filter *fp)
 	struct bpf_binary_header *header = (void *)addr;
 
 	if (fp->bpf_func == sk_run_filter)
-		return;
+		goto free_filter;
 	set_memory_rw(addr, header->pages);
 	module_free(NULL, header);
+free_filter:
+	kfree(fp);
 }
arch/sparc/net/bpf_jit_comp.c +1 -0
index 9c7be59..218b6b2 100644
@@ -808,4 +808,5 @@ void bpf_jit_free(struct sk_filter *fp)
 {
 	if (fp->bpf_func != sk_run_filter)
 		module_free(NULL, fp->bpf_func);
+	kfree(fp);
 }
arch/x86/net/bpf_jit_comp.c +1 -0
index 79c216a..1396a0a 100644
@@ -772,13 +772,23 @@ out:
 	return;
 }
 
+static void bpf_jit_free_deferred(struct work_struct *work)

arch/x86/net/bpf_jit_comp.c out: · line 785

Quoted 10 lines
arch/x86/net/bpf_jit_comp.c +10 -0
+{
+	struct sk_filter *fp = container_of((void *)work, struct sk_filter,
+					    insns);
+	unsigned long addr = (unsigned long)fp->bpf_func & PAGE_MASK;
+	struct bpf_binary_header *header = (void *)addr;
+
+	set_memory_rw(addr, header->pages);
+	module_free(NULL, header);
+	kfree(fp);
+}

Using the data type suggestions I make further below, this could be written in a simpler form, as:

	struct sk_filter *fp = container_of(work, struct sk_filter, work);

Also, a question, why do you mask with PAGE_MASK here:

	unsigned long addr = (unsigned long)fp->bpf_func & PAGE_MASK;

?

AFAICS bpf_func is the module_alloc() result - and module code is page aligned. So ->bpf_func is always page aligned here. (The sk_run_filter special case cannot happen here.)

arch/x86/net/bpf_jit_comp.c out: · line 791

Quoted 11 lines
arch/x86/net/bpf_jit_comp.c +3 -5
+
 void bpf_jit_free(struct sk_filter *fp)
 {
 	if (fp->bpf_func != sk_run_filter) {
-		unsigned long addr = (unsigned long)fp->bpf_func & PAGE_MASK;
-		struct bpf_binary_header *header = (void *)addr;
-
-		set_memory_rw(addr, header->pages);
-		module_free(NULL, header);
+		struct work_struct *work = (struct work_struct *)fp->insns;
+		INIT_WORK(work, bpf_jit_free_deferred);

Missing newline between local variables and statements.

Quoted 10 lines
arch/x86/net/bpf_jit_comp.c +1 -0
+		schedule_work(work);
 	}
 }
include/linux/filter.h +0 -0
index a6ac848..5d66cd9 100644
@@ -25,15 +25,20 @@ struct sk_filter
 {
 	atomic_t		refcnt;

include/linux/filter.h struct sk_filter · line 35

Quoted 10 lines
include/linux/filter.h +5 -1
 	unsigned int         	len;	/* Number of filter blocks */
+	struct rcu_head		rcu;
 	unsigned int		(*bpf_func)(const struct sk_buff *skb,
 					    const struct sock_filter *filter);
-	struct rcu_head		rcu;
+	/* insns start right after bpf_func, so that sk_run_filter() fetches
+	 * first insn from the same cache line that was used to call into
+	 * sk_run_filter()
+	 */
 	struct sock_filter     	insns[0];

Please use the customary (multi-line) comment style:

/*
* Comment .....
* ...... goes here.
*/

specified in Documentation/CodingStyle.

include/linux/filter.h struct sk_filter · line 41

Quoted 7 lines
include/linux/filter.h +2 -1
 };
 
 static inline unsigned int sk_filter_len(const struct sk_filter *fp)
 {
-	return fp->len * sizeof(struct sock_filter) + sizeof(*fp);
+	return max(fp->len * sizeof(struct sock_filter),
+		   sizeof(struct work_struct)) + sizeof(*fp);

So, "sizeof(struct work_struct)) + sizeof(*fp)" is a pattern that repeats a couple of times. Might make sense to stick that into a helper of its own
- but in general this open coded overlay allocation method looks a bit fragile and not very obvious in isolation.

So it could be done a bit cleaner, using an anonymous union:

	/*
	 * These two overlay, the work struct is used during workqueue 
	 * driven teardown, when the instructions are not used anymore:
	 */
	union {
		struct sock_filter     	insns[0];
		struct work_struct	work;
	};

And then all the sizeof() calculations become obvious and sk_filter_len() could be eliminated - I've marked the conversions in the code further below.

include/linux/filter.h static inline void bpf_jit_dump(unsigned int flen, unsigned int proglen, · line 75

Quoted 6 lines
include/linux/filter.h +1 -0
 extern int sk_filter(struct sock *sk, struct sk_buff *skb);
@@ -67,11 +72,13 @@ static inline void bpf_jit_dump(unsigned int flen, unsigned int proglen,
 }
 #define SK_RUN_FILTER(FILTER, SKB) (*FILTER->bpf_func)(SKB, FILTER->insns)
 #else
+#include <linux/slab.h>

Inlines in the middle of header files are generally frowned upon.

The standard pattern is to put them at the top, that way it's easier to see the dependencies and there's also less .config dependent inclusion, which makes header hell cleanup work easier.

Quoted 22 lines
include/linux/filter.h +1 -0
 static inline void bpf_jit_compile(struct sk_filter *fp)
 {
 }
 static inline void bpf_jit_free(struct sk_filter *fp)
 {
+	kfree(fp);
 }
 #define SK_RUN_FILTER(FILTER, SKB) sk_run_filter(SKB, FILTER->insns)
 #endif
net/core/filter.c +0 -1
index 6438f29..ad5eaba 100644
@@ -644,7 +644,6 @@ void sk_filter_release_rcu(struct rcu_head *rcu)
 	struct sk_filter *fp = container_of(rcu, struct sk_filter, rcu);
 
 	bpf_jit_free(fp);
-	kfree(fp);
 }
 EXPORT_SYMBOL(sk_filter_release_rcu);
 

net/core/filter.c int sk_unattached_filter_create(struct sk_filter **pfp, · line 680

Quoted 5 lines
net/core/filter.c +2 -0
@@ -677,13 +676,15 @@ int sk_unattached_filter_create(struct sk_filter **pfp,
 {
 	struct sk_filter *fp;
 	unsigned int fsize = sizeof(struct sock_filter) * fprog->len;
+	unsigned int sk_fsize = max_t(u32, fsize, sizeof(struct work_struct))
+		+ sizeof(*fp);

Using the structure definition I suggested, this could be replaced with the more obvious:

	unsigned int sk_fsize = max(fsize, sizeof(*fp));
Quoted 12 lines
net/core/filter.c +1 -1
 	int err;
 
 	/* Make sure new filter is there and in the right amounts. */
 	if (fprog->filter == NULL)
 		return -EINVAL;
 
-	fp = kmalloc(fsize + sizeof(*fp), GFP_KERNEL);
+	fp = kmalloc(sk_fsize, GFP_KERNEL);
 	if (!fp)
 		return -ENOMEM;
 	memcpy(fp->insns, fprog->filter, fsize);

net/core/filter.c int sk_attach_filter(struct sock_fprog *fprog, struct sock *sk) · line 728

Quoted 5 lines
net/core/filter.c +2 -0
@@ -723,6 +724,8 @@ int sk_attach_filter(struct sock_fprog *fprog, struct sock *sk)
 {
 	struct sk_filter *fp, *old_fp;
 	unsigned int fsize = sizeof(struct sock_filter) * fprog->len;
+	unsigned int sk_fsize = max_t(u32, fsize, sizeof(struct work_struct))
+		+ sizeof(*fp);

This too could be written as:

	unsigned int sk_fsize = max(fsize, sizeof(*fp));
Quoted 6 lines
net/core/filter.c +0 -0
 	int err;
 
 	if (sock_flag(sk, SOCK_FILTER_LOCKED))
@@ -732,11 +735,11 @@ int sk_attach_filter(struct sock_fprog *fprog, struct sock *sk)
 	if (fprog->filter == NULL)
 		return -EINVAL;

net/core/filter.c int sk_attach_filter(struct sock_fprog *fprog, struct sock *sk) · line 744

Quoted 10 lines
net/core/filter.c +2 -2
 
-	fp = sock_kmalloc(sk, fsize+sizeof(*fp), GFP_KERNEL);
+	fp = sock_kmalloc(sk, sk_fsize, GFP_KERNEL);
 	if (!fp)
 		return -ENOMEM;
 	if (copy_from_user(fp->insns, fprog->filter, fsize)) {
-		sock_kfree_s(sk, fp, fsize+sizeof(*fp));
+		sock_kfree_s(sk, fp, sk_fsize);
 		return -EFAULT;
 	}

A couple of questions/suggestions:

1)

I took a brief look at arch/x86/net/bpf_jit_comp.c while reviewing this patch.

You need to split up bpf_jit_compile(), it's an obscenely large, ~600 lines long function. We don't do that in modern, maintainable kernel code.

2)

This 128 bytes extra padding:

        /* Most of BPF filters are really small,
         * but if some of them fill a page, allow at least
         * 128 extra bytes to insert a random section of int3
         */
        sz = round_up(proglen + sizeof(*header) + 128, PAGE_SIZE);

why is it done? It's not clear to me from the comment.

3)

It's nice code altogether! Are there any plans to generalize its interfaces, to allow arbitrary bytecode to be used by other kernel subsystems as well? In particular tracing filters could make use of it, but it would also allow safe probe points.

Thanks,

Ingo

#3 lore raw

1)

Quoted 11 lines

I took a brief look at arch/x86/net/bpf_jit_comp.c while reviewing this patch.

You need to split up bpf_jit_compile(), it's an obscenely large, ~600 lines long function. We don't do that in modern, maintainable kernel code.

2)

This 128 bytes extra padding:

Quoted 8 lines
        /* Most of BPF filters are really small,
         * but if some of them fill a page, allow at least
         * 128 extra bytes to insert a random section of int3
         */
        sz = round_up(proglen + sizeof(*header) + 128, PAGE_SIZE);

why is it done? It's not clear to me from the comment.

commit 314beb9bcabfd6b4542ccbced2402af2c6f6142a

Author: Eric Dumazet <[email protected]>
Date:   Fri May 17 16:37:03 2013 +0000

x86: bpf_jit_comp: secure bpf jit against spraying attacks

hpa bringed into my attention some security related issues with BPF JIT on x86.

This patch makes sure the bpf generated code is marked read only, as other kernel text sections.

It also splits the unused space (we vmalloc() and only use a fraction of the page) in two parts, so that the generated bpf code not starts at a known offset in the page, but a pseudo random one.

Refs:

http://mainisusuallyafunction.blogspot.com/2012/11/attacking-hardened-linux-systems-with.html

_______________________________________________
Linuxppc-dev mailing list
[email protected]
https://lists.ozlabs.org/listinfo/linuxppc-dev

#4 lore raw
Quoted 30 lines · Eric Dumazet

1)

Quoted 11 lines

I took a brief look at arch/x86/net/bpf_jit_comp.c while reviewing this patch.

You need to split up bpf_jit_compile(), it's an obscenely large, ~600 lines long function. We don't do that in modern, maintainable kernel code.

2)

This 128 bytes extra padding:

Quoted 8 lines
        /* Most of BPF filters are really small,
         * but if some of them fill a page, allow at least
         * 128 extra bytes to insert a random section of int3
         */
        sz = round_up(proglen + sizeof(*header) + 128, PAGE_SIZE);

why is it done? It's not clear to me from the comment.

commit 314beb9bcabfd6b4542ccbced2402af2c6f6142a

Author: Eric Dumazet <[email protected]>
Date:   Fri May 17 16:37:03 2013 +0000

x86: bpf_jit_comp: secure bpf jit against spraying attacks

hpa bringed into my attention some security related issues with BPF JIT on x86.

Quoted 6 lines

This patch makes sure the bpf generated code is marked read only, as other kernel text sections.

It also splits the unused space (we vmalloc() and only use a fraction of the page) in two parts, so that the generated bpf code not starts at a known offset in the page, but a pseudo random one.

Thanks for the explanation - that makes sense.

Ingo

#5 lore raw
In reply to Ingo Molnar
Quoted 15 lines · Ingo Molnar

arch/x86/net/bpf_jit_comp.c out: · line 785

Quoted 11 lines
arch/x86/net/bpf_jit_comp.c +11 -0
+static void bpf_jit_free_deferred(struct work_struct *work)
+{
+     struct sk_filter *fp = container_of((void *)work, struct sk_filter,
+                                         insns);
+     unsigned long addr = (unsigned long)fp->bpf_func & PAGE_MASK;
+     struct bpf_binary_header *header = (void *)addr;
+
+     set_memory_rw(addr, header->pages);
+     module_free(NULL, header);
+     kfree(fp);
+}

Using the data type suggestions I make further below, this could be written in a simpler form, as:

Quoted 1 line
        struct sk_filter *fp = container_of(work, struct sk_filter, work);

yes. I've made it already as part of V4

Quoted 9 lines

Also, a question, why do you mask with PAGE_MASK here:

        unsigned long addr = (unsigned long)fp->bpf_func & PAGE_MASK;

?

AFAICS bpf_func is the module_alloc() result - and module code is page aligned. So ->bpf_func is always page aligned here. (The sk_run_filter special case cannot happen here.)

randomization of bpf_func start is a prevention of jit spraying attacks as Eric pointed out.

Quoted 11 lines

arch/x86/net/bpf_jit_comp.c out: · line 791

Quoted 10 lines

void bpf_jit_free(struct sk_filter *fp)

 {
      if (fp->bpf_func != sk_run_filter) {
arch/x86/net/bpf_jit_comp.c +2 -5
-             unsigned long addr = (unsigned long)fp->bpf_func & PAGE_MASK;
-             struct bpf_binary_header *header = (void *)addr;
-
-             set_memory_rw(addr, header->pages);
-             module_free(NULL, header);
+             struct work_struct *work = (struct work_struct *)fp->insns;
+             INIT_WORK(work, bpf_jit_free_deferred);
Quoted 1 line

Missing newline between local variables and statements.

yes. noted and fixed in V4.

Quoted 9 lines

include/linux/filter.h struct sk_filter · line 35

Quoted 8 lines

unsigned int (*bpf_func)(const struct sk_buff *skb,
const struct sock_filter *filter);

include/linux/filter.h +4 -1
-     struct rcu_head         rcu;
+     /* insns start right after bpf_func, so that sk_run_filter() fetches
+      * first insn from the same cache line that was used to call into
+      * sk_run_filter()
+      */
      struct sock_filter      insns[0];
Quoted 8 lines

Please use the customary (multi-line) comment style:

/*
* Comment .....
* ...... goes here.
*/

specified in Documentation/CodingStyle.

I believe filter.h belongs to networking comment style, that's why checkpatch didn't complain.
But I removed the comment in V4

Quoted 22 lines

include/linux/filter.h struct sk_filter · line 41

Quoted 5 lines

static inline unsigned int sk_filter_len(const struct sk_filter *fp) {

include/linux/filter.h +2 -1
-     return fp->len * sizeof(struct sock_filter) + sizeof(*fp);
+     return max(fp->len * sizeof(struct sock_filter),
+                sizeof(struct work_struct)) + sizeof(*fp);

So, "sizeof(struct work_struct)) + sizeof(*fp)" is a pattern that repeats a couple of times. Might make sense to stick that into a helper of its own
- but in general this open coded overlay allocation method looks a bit fragile and not very obvious in isolation.

So it could be done a bit cleaner, using an anonymous union:

        /*
         * These two overlay, the work struct is used during workqueue
         * driven teardown, when the instructions are not used anymore:
         */
        union {
                struct sock_filter      insns[0];
                struct work_struct      work;
        };
Quoted 3 lines

And then all the sizeof() calculations become obvious and sk_filter_len() could be eliminated - I've marked the conversions in the code further below.

Eric made exactly the same comment. Agreed and fixed in V4

Quoted 8 lines
Quoted 2 lines

#else
+#include <linux/slab.h>

Inlines in the middle of header files are generally frowned upon.

The standard pattern is to put them at the top, that way it's easier to see the dependencies and there's also less .config dependent inclusion, which makes header hell cleanup work easier.

Agree. I only followed the style that is already in filter.h 20 lines above. #ifdef CONFIG_BPF_JIT
#include <stdarg.h>
#include <linux/linkage.h>
#include <linux/printk.h>

as part of the cleanup can move all of them to the top. In the separate commit?

Quoted 9 lines

Review

Quoted 4 lines
      struct sk_filter *fp;
      unsigned int fsize = sizeof(struct sock_filter) * fprog->len;
(quoted diff) +2 -0
+     unsigned int sk_fsize = max_t(u32, fsize, sizeof(struct work_struct))
+             + sizeof(*fp);

Using the structure definition I suggested, this could be replaced with the more obvious:

        unsigned int sk_fsize = max(fsize, sizeof(*fp));

with helper function it's even cleaner. Fixed in V4

Quoted 9 lines

A couple of questions/suggestions:

1)

I took a brief look at arch/x86/net/bpf_jit_comp.c while reviewing this patch.

You need to split up bpf_jit_compile(), it's an obscenely large, ~600 lines long function. We don't do that in modern, maintainable kernel code.

I had the same thought, therefore in my proposed generalization of bpf:
http://patchwork.ozlabs.org/patch/279280/
It is split into two. do_jit() is still a bit large at 400 lines. Can split it further.

Quoted 6 lines

3)

It's nice code altogether! Are there any plans to generalize its interfaces, to allow arbitrary bytecode to be used by other kernel subsystems as well? In particular tracing filters could make use of it, but it would also allow safe probe points.

That was exactly the reasons to generalize bpf as I proposed. "extended BPF is a set of pseudo instructions that stitch kernel provided data in the form of bpf_context with kernel provided set of functions in a safe and deterministic way with minimal performance overhead vs native code" Not sure what 'tracing filters' you have in mind, but I'm happy to try them with extended bpf model.
imo existing bpf with two registers is too limiting for performance and argument passing.
That's why going to 10 made it a lot more flexible and generically usable. Sorry to hijack the thread.

Thanks
Alexei

Acked-by
#6 lore raw
Quoted 9 lines · Alexei Starovoitov
Quoted 8 lines
Quoted 2 lines

#else
+#include <linux/slab.h>

Inlines in the middle of header files are generally frowned upon.

The standard pattern is to put them at the top, that way it's easier to see the dependencies and there's also less .config dependent inclusion, which makes header hell cleanup work easier.

Quoted 8 lines

Agree. I only followed the style that is already in filter.h 20 lines above.

#ifdef CONFIG_BPF_JIT
#include <stdarg.h>
#include <linux/linkage.h>
#include <linux/printk.h>

as part of the cleanup can move all of them to the top. In the separate commit?

Yeah, sure, that's fine.

Quoted 11 lines
Quoted 9 lines

Review

Quoted 4 lines
      struct sk_filter *fp;
      unsigned int fsize = sizeof(struct sock_filter) * fprog->len;
(quoted diff) +2 -0
+     unsigned int sk_fsize = max_t(u32, fsize, sizeof(struct work_struct))
+             + sizeof(*fp);

Using the structure definition I suggested, this could be replaced with the more obvious:

        unsigned int sk_fsize = max(fsize, sizeof(*fp));

with helper function it's even cleaner. Fixed in V4

So my thought was that the helper function is perhaps too trivial and somewhat obscures the allocation pattern, but yeah. Either way is fine with me.

Quoted 7 lines
Quoted 7 lines

A couple of questions/suggestions:

1)

I took a brief look at arch/x86/net/bpf_jit_comp.c while reviewing this patch.

Quoted 7 lines
Quoted 2 lines

You need to split up bpf_jit_compile(), it's an obscenely large, ~600 lines long function. We don't do that in modern, maintainable kernel code.

I had the same thought, therefore in my proposed generalization of bpf:
http://patchwork.ozlabs.org/patch/279280/
It is split into two. do_jit() is still a bit large at 400 lines. Can split it further.

Yeah, I think as long as you split out the loop iterator into a separate function it gets much better.

The actual instruction generation code within the iterator looks good in a single chunk - splitting it up further than that might in fact make it less readable.

Quoted 8 lines
Quoted 6 lines

3)

It's nice code altogether! Are there any plans to generalize its interfaces, to allow arbitrary bytecode to be used by other kernel subsystems as well? In particular tracing filters could make use of it, but it would also allow safe probe points.

That was exactly the reasons to generalize bpf as I proposed.

Ok, cool :-)

For the x86 bits:

Thanks,

Ingo