Skip to contentSkip to conversation

double fault: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC

xen In review Fengguang Wu 10 participants 82 messages Oct 6, 2013 – Oct 23, 2013 Page 3 of 3

Subsystems (5)
lore
Share & tools
lore
#26 lore raw

[DRM_CURRUS_QEMU/timer] WARNING: CPU: 0 PID: 1 at debug_print_object()

In reply to Fengguang Wu

Hi all,

It's this one config that triggers the oops:

CONFIG_DRM_CIRRUS_QEMU

Full kconfig is attached. CONFIG_DEBUG_LIST has been enabled. What's interesting is that parport_pc is showing up in the call traces.

dmesg log for two kernel boots:

% kvm-0day.sh arch/x86/boot/bzImage

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.11.0-rc2-00010-gc817a67-dirty (wfg@bee) (gcc version 4.6.3 (Debian 4.6.3-1) ) #21 SMP PREEMPT Tue Oct 8 12:13:02 CST 2013
[    0.000000] Command line: hung_task_panic=1 rcutree.rcu_cpu_stall_timeout=100 log_buf_len=8M debug sched_debug ignore_loglevel apic=debug dynamic_printk sysrq_always_enabled panic=10 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal  root=/dev/ram0 rw
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000fffdfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000fffe000-0x000000000fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] debug: ignoring loglevel setting.
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] Hypervisor detected: KVM
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0xfffe max_arch_pfn = 0x400000000
[    0.000000] Scan for SMP in [mem 0x00000000-0x000003ff]
[    0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff]
[    0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff]
[    0.000000] found SMP MP-table at [mem 0x000f1840-0x000f184f] mapped at [ffff8800000f1840]
[    0.000000]   mpc: f1850-f193c
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x02870000, 0x02870fff] PGTABLE
[    0.000000] BRK [0x02871000, 0x02871fff] PGTABLE
[    0.000000] BRK [0x02872000, 0x02872fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x0e600000-0x0e7fffff]
[    0.000000]  [mem 0x0e600000-0x0e7fffff] page 4k
[    0.000000] BRK [0x02873000, 0x02873fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x0c000000-0x0e5fffff]
[    0.000000]  [mem 0x0c000000-0x0e5fffff] page 4k
[    0.000000] BRK [0x02874000, 0x02874fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x00100000-0x0bffffff]
[    0.000000]  [mem 0x00100000-0x0bffffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x0e800000-0x0fffdfff]
[    0.000000]  [mem 0x0e800000-0x0fffdfff] page 4k
[    0.000000] log_buf_len: 8388608
[    0.000000] early log buf free: 128344(97%)
[    0.000000] RAMDISK: [mem 0x0e8d6000-0x0ffeffff]
[    0.000000] ACPI: RSDP 00000000000f16b0 00014 (v00 BOCHS )
[    0.000000] ACPI: RSDT 000000000fffe3f0 00034 (v01 BOCHS  BXPCRSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACP 000000000fffff80 00074 (v01 BOCHS  BXPCFACP 00000001 BXPC 00000001)
[    0.000000] ACPI: DSDT 000000000fffe430 01137 (v01   BXPC   BXDSDT 00000001 INTL 20100528)
[    0.000000] ACPI: FACS 000000000fffff40 00040
[    0.000000] ACPI: SSDT 000000000ffff6a0 00899 (v01 BOCHS  BXPCSSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: APIC 000000000ffff5b0 00080 (v01 BOCHS  BXPCAPIC 00000001 BXPC 00000001)
[    0.000000] ACPI: HPET 000000000ffff570 00038 (v01 BOCHS  BXPCHPET 00000001 BXPC 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] mapped APIC to ffffffffff5bb000 (        fee00000)
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000000] kvm-clock: cpu 0, msr 0:e896001, boot clock
[    0.000000] Zone ranges:
[    0.000000]   DMA32    [mem 0x00001000-0xffffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0x0fffdfff]
[    0.000000] On node 0 totalpages: 65436
[    0.000000]   DMA32 zone: 1024 pages used for memmap
[    0.000000]   DMA32 zone: 21 pages reserved
[    0.000000]   DMA32 zone: 65436 pages, LIFO batch:15
[    0.000000] ACPI: PM-Timer IO Port: 0xb008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] mapped APIC to ffffffffff5bb000 (        fee00000)
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04
[    0.000000] ACPI: IRQ5 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ10 used by override.
[    0.000000] ACPI: IRQ11 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] mapped IOAPIC to ffffffffff5ba000 (fec00000)
[    0.000000] nr_irqs_gsi: 40
[    0.000000] e820: [mem 0x10000000-0xfeffbfff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on KVM
[    0.000000] setup_percpu: NR_CPUS:4096 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 25 pages/cpu @ffff88000dc00000 s77904 r0 d24496 u1048576
[    0.000000] pcpu-alloc: s77904 r0 d24496 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1
[    0.000000] kvm-clock: cpu 0, msr 0:e896001, primary cpu clock
[    0.000000] KVM setup async PF for cpu 0
[    0.000000] kvm-stealtime: cpu 0, msr dc0ccc0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 64391
[    0.000000] Kernel command line: hung_task_panic=1 rcutree.rcu_cpu_stall_timeout=100 log_buf_len=8M debug sched_debug ignore_loglevel apic=debug dynamic_printk sysrq_always_enabled panic=10 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal  root=/dev/ram0 rw
[    0.000000] PID hash table entries: 1024 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 199288K/261744K available (8414K kernel code, 1769K rwdata, 3912K rodata, 840K init, 10060K bss, 62456K reserved)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  RCU debugfs-based tracing is enabled.
[    0.000000]  Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000]  Additional per-CPU info printed with stalls.
[    0.000000]  RCU restricting CPUs from NR_CPUS=4096 to nr_cpu_ids=2.
[    0.000000] NR_IRQS:262400 nr_irqs:512 16
[    0.000000] console [ttyS0] enabled
[    0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[    0.000000] ... MAX_LOCKDEP_SUBCLASSES:  8
[    0.000000] ... MAX_LOCK_DEPTH:          48
[    0.000000] ... MAX_LOCKDEP_KEYS:        8191
[    0.000000] ... CLASSHASH_SIZE:          4096
[    0.000000] ... MAX_LOCKDEP_ENTRIES:     16384
[    0.000000] ... MAX_LOCKDEP_CHAINS:      32768
[    0.000000] ... CHAINHASH_SIZE:          16384
[    0.000000]  memory used by lock dependency info: 5855 kB
[    0.000000]  per task-struct memory footprint: 1920 bytes
[    0.000000] ODEBUG: 15 of 15 active objects replaced
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Detected 2693.508 MHz processor
[    0.008000] Calibrating delay loop (skipped) preset value.. 5387.01 BogoMIPS (lpj=10774032)
[    0.008900] pid_max: default: 32768 minimum: 301
[    0.010404] Mount-cache hash table entries: 256
[    0.012563] Initializing cgroup subsys devices
[    0.013988] Initializing cgroup subsys perf_event
[    0.016029] Initializing cgroup subsys net_prio
[    0.017509] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.017509] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.017509] tlb_flushall_shift: 6
[    0.020044] debug: unmapping init [mem 0xffffffff81e99000-0xffffffff81e9cfff]
[    0.025205] ACPI: Core revision 20130517
[    0.029922] ACPI: All ACPI Tables successfully acquired
[    0.031603] Getting VERSION: 50014
[    0.032020] Getting VERSION: 50014
[    0.032810] Getting ID: 0
[    0.033414] Getting ID: ff000000
[    0.034171] Getting LVT0: 8700
[    0.034854] Getting LVT1: 8400
[    0.036080] enabled ExtINT on CPU#0
[    0.037876] ENABLING IO-APIC IRQs
[    0.038574] init IO_APIC IRQs
[    0.039266]  apic 0 pin 0 not connected
[    0.040043] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1)
[    0.041645] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1)
[    0.043277] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1)
[    0.044036] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1)
[    0.045680] IOAPIC[0]: Set routing entry (0-5 -> 0x35 -> IRQ 5 Mode:1 Active:0 Dest:1)
[    0.048044] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1)
[    0.049811] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1)
[    0.052032] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1)
[    0.053623] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:1)
[    0.055202] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:1)
[    0.056036] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:1)
[    0.057707] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1)
[    0.060032] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1)
[    0.061660] IOAPIC[0]: Set routing entry (0-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1)
[    0.063253] IOAPIC[0]: Set routing entry (0-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1)
[    0.064034]  apic 0 pin 16 not connected
[    0.064800]  apic 0 pin 17 not connected
[    0.065586]  apic 0 pin 18 not connected
[    0.068007]  apic 0 pin 19 not connected
[    0.068949]  apic 0 pin 20 not connected
[    0.069814]  apic 0 pin 21 not connected
[    0.070588]  apic 0 pin 22 not connected
[    0.071363]  apic 0 pin 23 not connected
[    0.072161] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.073514] smpboot: CPU0: Intel Common KVM processor (fam: 0f, model: 06, stepping: 01)
[    0.076010] Using local APIC timer interrupts.
[    0.076010] calibrating APIC timer ...
[    0.080000] ... lapic delta = 6251588
[    0.080000] ... PM-Timer delta = 358050
[    0.080000] ... PM-Timer result ok
[    0.080000] ..... delta 6251588
[    0.080000] ..... mult: 268503660
[    0.080000] ..... calibration result: 4001016
[    0.080000] ..... CPU clock speed is 2694.0774 MHz.
[    0.080000] ..... host bus clock speed is 1000.1016 MHz.
[    0.080103] Performance Events: unsupported Netburst CPU model 6 no PMU driver, software events only.
[    0.104619] SMP alternatives: lockdep: fixing up alternatives
[    0.105760] smpboot: Booting Node   0, Processors  #1 OK
[    0.008000] kvm-clock: cpu 1, msr 0:e896041, secondary cpu clock
[    0.008000] masked ExtINT on CPU#1
[    0.124228] Brought up 2 CPUs
[    0.128008] smpboot: Total of 2 processors activated (10774.03 BogoMIPS)
[    0.128018] KVM setup async PF for cpu 1
[    0.128024] kvm-stealtime: cpu 1, msr dd0ccc0
[    0.132339] devtmpfs: initialized
[    0.134316] atomic64 test passed for x86-64 platform with CX8 and with SSE
[    0.137823] regulator-dummy: no parameters
[    0.140475] NET: Registered protocol family 16
[    0.144020] ACPI: bus type PCI registered
[    0.145070] PCI: Using configuration type 1 for base access
[    0.156835] ACPI: Added _OSI(Module Device)
[    0.157753] ACPI: Added _OSI(Processor Device)
[    0.158814] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.159940] ACPI: Added _OSI(Processor Aggregator Device)
[    0.162585] ACPI: EC: Look up EC in DSDT
[    0.172295] ACPI: Interpreter enabled
[    0.173216] ACPI: (supports S0 S5)
[    0.174334] ACPI: Using IOAPIC for interrupt routing
[    0.175518] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.193772] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.195674] PCI host bridge to bus 0000:00
[    0.196012] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.197193] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.200014] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.201243] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.203313] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff]
[    0.204119] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[    0.206212] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[    0.208825] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
[    0.215270] pci 0000:00:01.1: reg 0x20: [io  0xc060-0xc06f]
[    0.217885] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
[    0.220556] pci 0000:00:01.3: quirk: [io  0xb000-0xb03f] claimed by PIIX4 ACPI
[    0.222046] pci 0000:00:01.3: quirk: [io  0xb100-0xb10f] claimed by PIIX4 SMB
[    0.224490] pci 0000:00:02.0: [1013:00b8] type 00 class 0x030000
[    0.232075] pci 0000:00:02.0: reg 0x10: [mem 0xfc000000-0xfdffffff pref]
[    0.238502] pci 0000:00:02.0: reg 0x14: [mem 0xfebe2000-0xfebe2fff]
[    0.256119] pci 0000:00:02.0: reg 0x30: [mem 0xfebd0000-0xfebdffff pref]
[    0.258218] pci 0000:00:03.0: [1af4:1000] type 00 class 0x020000
[    0.260615] pci 0000:00:03.0: reg 0x10: [io  0xc040-0xc05f]
[    0.262307] pci 0000:00:03.0: reg 0x14: [mem 0xfebe1000-0xfebe1fff]
[    0.269203] pci 0000:00:03.0: reg 0x30: [mem 0xfebc0000-0xfebcffff pref]
[    0.271496] pci 0000:00:04.0: [8086:100e] type 00 class 0x020000
[    0.273304] pci 0000:00:04.0: reg 0x10: [mem 0xfeb80000-0xfeb9ffff]
[    0.277257] pci 0000:00:04.0: reg 0x14: [io  0xc000-0xc03f]
[    0.285998] pci 0000:00:04.0: reg 0x30: [mem 0xfeba0000-0xfebbffff pref]
[    0.288470] pci 0000:00:05.0: [8086:25ab] type 00 class 0x088000
[    0.291123] pci 0000:00:05.0: reg 0x10: [mem 0xfebe0000-0xfebe000f]
[    0.298719] pci_bus 0000:00: on NUMA node 0
[    0.300032] acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[    0.301846] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
[    0.306340] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[    0.309000] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[    0.311763] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[    0.312767] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[    0.314684] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
[    0.320745] ACPI: Enabled 16 GPEs in block 00 to 0F
[    0.323663] ACPI: \_SB_.PCI0: notify handler is installed
[    0.324130] Found 1 acpi root devices
[    0.326173] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.328018] vgaarb: loaded
[    0.328796] vgaarb: bridge control possible 0000:00:02.0
[    0.336847] ACPI: bus type USB registered
[    0.338330] usbcore: registered new interface driver usbfs
[    0.340085] usbcore: registered new interface driver hub
[    0.344095] usbcore: registered new device driver usb
[    0.345695] pps_core: LinuxPPS API ver. 1 registered
[    0.346883] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[    0.348083] PTP clock support registered
[    0.349337] wmi: Mapper loaded
[    0.350176] PCI: Using ACPI for IRQ routing
[    0.352020] PCI: pci_cache_line_size set to 64 bytes
[    0.353327] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.356035] e820: reserve RAM buffer [mem 0x0fffe000-0x0fffffff]
[    0.359535] NET: Registered protocol family 23
[    0.361321] cfg80211: Calling CRDA to update world regulatory domain
[    0.364174] nfc: nfc_init: NFC Core ver 0.1
[    0.365366] NET: Registered protocol family 39
[    0.369362] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.372289] Switched to clocksource kvm-clock
[    0.373511] pnp: PnP ACPI init
[    0.374570] ACPI: bus type PNP registered
[    0.376463] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:3)
[    0.378102] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.379645] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:3)
[    0.381943] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.383861] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:3)
[    0.387140] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.389417] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:3)
[    0.391966] pnp 00:03: [dma 2]
[    0.393255] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.395441] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:3)
[    0.397583] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.400259] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:3)
[    0.402347] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.404997] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.407836] pnp: PnP ACPI: found 7 devices
[    0.409200] ACPI: bus type PNP unregistered
[    0.420246] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.421857] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.423395] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.425178] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff]
[    0.427513] NET: Registered protocol family 2
[    0.429791] TCP established hash table entries: 2048 (order: 3, 32768 bytes)
[    0.431941] TCP bind hash table entries: 2048 (order: 5, 131072 bytes)
[    0.434214] TCP: Hash tables configured (established 2048 bind 2048)
[    0.435995] TCP: reno registered
[    0.437022] UDP hash table entries: 256 (order: 3, 40960 bytes)
[    0.439350] UDP-Lite hash table entries: 256 (order: 3, 40960 bytes)
[    0.442179] NET: Registered protocol family 1
[    0.444923] RPC: Registered named UNIX socket transport module.
[    0.446230] RPC: Registered udp transport module.
[    0.447351] RPC: Registered tcp transport module.
[    0.448555] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.450301] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[    0.452328] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[    0.453773] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[    0.455331] pci 0000:00:02.0: Boot video device
[    0.456502] PCI: CLS 0 bytes, default 64
[    0.457881] Unpacking initramfs...
[    2.676108] debug: unmapping init [mem 0xffff88000e8d6000-0xffff88000ffeffff]
[    2.679721] has_svm: not amd
[    2.680505] kvm: no hardware support
[    2.681829] camellia-x86_64: performance on this CPU would be suboptimal: disabling camellia-x86_64.
[    2.684176] blowfish-x86_64: performance on this CPU would be suboptimal: disabling blowfish-x86_64.
[    2.686848] twofish-x86_64-3way: performance on this CPU would be suboptimal: disabling twofish-x86_64-3way.
[    2.689322] sha1_ssse3: Neither AVX nor SSSE3 is available/usable.
[    2.689403] cryptomgr_test (24) used greatest stack depth: 6376 bytes left
[    2.692789] sha256_ssse3: Neither AVX nor SSSE3 is available/usable.
[    2.694258] sha512_ssse3: Neither AVX nor SSSE3 is available/usable.
[    2.695822] AVX or AES-NI instructions are not detected.
[    2.697224] AVX instructions are not detected.
[    2.699223] AVX instructions are not detected.
[    2.700535] AVX instructions are not detected.
[    2.706217] Initializing RT-Tester: OK
[    2.706703] audit: initializing netlink socket (disabled)
[    2.707412] type=2000 audit(1378709047.165:1): initialized
[    2.711701] DLM installed
[    2.713609] NFS: Registering the id_resolver key type
[    2.714985] Key type id_resolver registered
[    2.715991] Key type id_legacy registered
[    2.717078] Installing knfsd (copyright (C) 1996 [email protected]).
[    2.719526] ROMFS MTD (C) 2007 Red Hat, Inc.
[    2.720989] fuse init (API version 7.22)
[    2.723115] ceph: loaded (mds proto 32)
[    2.726574] cryptomgr_test (43) used greatest stack depth: 5752 bytes left
[    2.729298] cryptomgr_test (44) used greatest stack depth: 5680 bytes left
[    2.744376] cryptomgr_test (72) used greatest stack depth: 5264 bytes left
[    2.748934] alg: No test for crc32 (crc32-table)
[    2.750206] alg: No test for lz4hc (lz4hc-generic)
[    2.751680] alg: No test for stdrng (krng)
[    2.752602] NET: Registered protocol family 38
[    2.753198] Key type asymmetric registered
[    2.753723] Asymmetric key parser 'x509' registered
[    2.754274] test_string_helpers: Running tests...
[    2.756524] crc32: CRC_LE_BITS = 32, CRC_BE BITS = 32
[    2.757198] crc32: self tests passed, processed 225944 bytes in 519468 nsec
[    2.758467] crc32c: CRC_LE_BITS = 32
[    2.759216] crc32c: self tests passed, processed 225944 bytes in 141849 nsec
[    2.761588] cr_bllcd: INTEL CARILLO RANCH LPC not found.
[    2.763198] cr_bllcd: Carillo Ranch Backlight Driver Initialized.
[    2.765729] VIA Graphics Integration Chipset framebuffer 2.4 initializing
[    2.768095] vmlfb: initializing
[    2.768651] Could not find Carillo Ranch MCH device.
[    2.770930] no IO addresses supplied
[    2.772165] hgafb: HGA card not detected.
[    2.773134] hgafb: probe of hgafb.0 failed with error -22
[    2.775144] usbcore: registered new interface driver udlfb
[    2.776974] usbcore: registered new interface driver smscufx
[    2.780665] uvesafb: failed to execute /sbin/v86d
[    2.782074] uvesafb: make sure that the v86d helper is installed and executable
[    2.783894] uvesafb: Getting VBE info block failed (eax=0x4f00, err=-2)
[    2.785935] uvesafb: vbe_init() failed with -22
[    2.787031] uvesafb: probe of uvesafb.0 failed with error -22
[    2.789001] ipmi message handler version 39.2
[    2.790143] ipmi device interface
[    2.791138] IPMI System Interface driver.
[    2.792413] ipmi_si: Adding default-specified kcs state machine
[    2.794055] ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
[    2.796746] ipmi_si: Interface detection failed
[    2.808161] ipmi_si: Adding default-specified smic state machine
[    2.809838] ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0
[    2.812967] ipmi_si: Interface detection failed
[    2.824150] ipmi_si: Adding default-specified bt state machine
[    2.826234] ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0
[    2.829592] ipmi_si: Interface detection failed
[    2.840339] kobject: 'ipmi_si' (ffff8800077a2600): kobject_release, parent ffff8800001b7648 (delayed)
[    2.842528] kobject: 'ipmi_si' (ffff8800077a2400): kobject_release, parent ffff880000221448 (delayed)
[    2.844867] kobject: 'ipmi_si' (ffff8800077a2800): kobject_release, parent ffff880000189248 (delayed)
[    2.847617] ipmi_si: Unable to find any System Interface(s)
[    2.849859] IPMI Watchdog: driver initialized
[    2.851416] Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot.
[    2.854553] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    2.857101] ACPI: Power Button [PWRF]
[    2.977343] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    3.000940] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    3.006511] Applicom driver: $Id: ac.c,v 1.30 2000/03/22 16:03:57 dwmw2 Exp $
[    3.008608] ac.o: No PCI boards found.
[    3.009721] ac.o: For an ISA board you must supply memory and irq parameters.
[    3.012508] Non-volatile memory driver v1.3
[    3.013350] Linux agpgart interface v0.103
[    3.015283] [drm:drm_core_init] *ERROR* Cannot create /proc/dri
[    3.016918] kobject: 'drm' (ffff880006dd6048): kobject_release, parent ffff880000189648 (delayed)
[    3.019223] kobject: 'drm' (ffff880006dd7c00): kobject_release, parent           (null) (delayed)
[    3.022075] [drm] radeon kernel modesetting enabled.
[    3.024718] [drm:drm_proc_init] *ERROR* Cannot create /proc/dri/0
[    3.025883] [drm:drm_get_minor] *ERROR* DRM: Failed to initialize /proc/dri.
[    3.027772] kobject: 'controlD64' (ffff880006de9820): kobject_release, parent           (null) (delayed)
[    3.030311] cirrus: probe of 0000:00:02.0 failed with error -1
[    3.031237] usbcore: registered new interface driver udl
[    3.033268] parport_pc 00:04: reported by Plug and Play ACPI
[    3.034204] parport0: PC-style at 0x378, irq 7 [PCSPP(,...)]
[    3.036189] kobject: 'parport_pc.956' (ffff880006de9820): kobject_release, parent           (null) (delayed)
[    3.037736] ------------[ cut here ]------------
[    3.038499] WARNING: CPU: 0 PID: 1 at /c/wfg/linux/lib/debugobjects.c:260 debug_print_object+0x7c/0x8d()
[    3.040020] ODEBUG: init active (active state 0) object type: timer_list hint:           (null)
[    3.040020] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.11.0-rc2-00010-gc817a67-dirty #21
[    3.040020]  0000000000000104 ffff88000010db78 ffffffff8182ae08 0000000000000000
[    3.040020]  ffff88000010dbc8 ffff88000010dbb8 ffffffff8108f040 0000000000000046
[    3.040020]  ffffffff81220eaa ffffffff81beef1e ffff880006dc5510 ffffffff81c2e2d0
[    3.040020] Call Trace:
[    3.040020]  [<ffffffff8182ae08>] dump_stack+0x4f/0x84
[    3.040020]  [<ffffffff8108f040>] warn_slowpath_common+0x72/0x8c
[    3.040020]  [<ffffffff81220eaa>] ? debug_print_object+0x7c/0x8d
[    3.040020]  [<ffffffff8108f0be>] warn_slowpath_fmt+0x41/0x43
[    3.040020]  [<ffffffff81220eaa>] debug_print_object+0x7c/0x8d
[    3.040020]  [<ffffffff81221209>] __debug_object_init+0x27c/0x2c6
[    3.040020]  [<ffffffff81221244>] ? __debug_object_init+0x2b7/0x2c6
[    3.040020]  [<ffffffff81221267>] debug_object_init+0x14/0x16
[    3.040020]  [<ffffffff81098f20>] init_timer_key+0x23/0x65
[    3.040020]  [<ffffffff81210bbe>] kobject_release+0x90/0xba
[    3.040020]  [<ffffffff81210e3b>] kobject_put+0x4d/0x51
[    3.040020]  [<ffffffff81462ce4>] put_device+0x12/0x14
[    3.040020]  [<ffffffff814672f6>] platform_device_put+0x12/0x14
[    3.040020]  [<ffffffff8146767b>] platform_device_unregister+0x16/0x1a
[    3.040020]  [<ffffffff814610e7>] parport_pc_probe_port+0x7b7/0x7cc
[    3.040020]  [<ffffffff81e00a15>] parport_pc_init+0x2b0/0x317
[    3.040020]  [<ffffffff81e00765>] ? parport_setup+0x147/0x147
[    3.040020]  [<ffffffff81ddbe0c>] do_one_initcall+0x8e/0x132
[    3.040020]  [<ffffffff810a6c00>] ? param_array_set+0xa7/0xf2
[    3.040020]  [<ffffffff810a6e4d>] ? parse_args+0x1ad/0x26c
[    3.040020]  [<ffffffff81215c82>] ? strcpy+0x9/0x18
[    3.040020]  [<ffffffff81ddbfe2>] kernel_init_freeable+0x132/0x1bc
[    3.040020]  [<ffffffff81ddb6e3>] ? do_early_param+0x86/0x86
[    3.040020]  [<ffffffff81824c6f>] ? rest_init+0xc3/0xc3
[    3.040020]  [<ffffffff81824c78>] kernel_init+0x9/0xcc
[    3.040020]  [<ffffffff81835f7c>] ret_from_fork+0x7c/0xb0
[    3.040020]  [<ffffffff81824c6f>] ? rest_init+0xc3/0xc3
[    3.040020] ---[ end trace eb7906735b7816b7 ]---
[    3.096136] INFO: trying to register non-static key.
[    3.097385] the code is fine but needs lockdep annotation.
[    3.098753] turning off the locking correctness validator.
[    3.099835] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W    3.11.0-rc2-00010-gc817a67-dirty #21
[    3.100075]  0000000000000046 ffff88000010da28 ffffffff8182ae08 0000000000000000
[    3.100075]  0000000000000000 ffff88000010daa8 ffffffff810c56de ffff88000010da88
[    3.100075]  ffffffff81090497 0000000000007adc 0000000000000046 ffff88000010da78
[    3.100075] Call Trace:
[    3.100075]  [<ffffffff8182ae08>] dump_stack+0x4f/0x84
[    3.100075]  [<ffffffff810c56de>] register_lock_class+0x104/0x2b2
[    3.100075]  [<ffffffff81090497>] ? console_unlock+0x35b/0x36a
[    3.100075]  [<ffffffff810c798e>] __lock_acquire+0xf6/0xe3c
[    3.100075]  [<ffffffff818357b7>] ? retint_restore_args+0x13/0x13
[    3.100075]  [<ffffffff810c6c25>] ? trace_hardirqs_on_caller+0x154/0x18b
[    3.100075]  [<ffffffff810c8afd>] lock_acquire+0x7e/0x99
[    3.100075]  [<ffffffff81099263>] ? try_to_del_timer_sync+0x5f/0x5f
[    3.100075]  [<ffffffff810992ac>] del_timer_sync+0x49/0xcb
[    3.100075]  [<ffffffff81099263>] ? try_to_del_timer_sync+0x5f/0x5f
[    3.100075]  [<ffffffff810cd647>] ? arch_local_irq_restore+0x6/0xd
[    3.100075]  [<ffffffff81099372>] timer_fixup_init+0x16/0x2f
[    3.100075]  [<ffffffff81220ce3>] debug_object_fixup+0x15/0x1d
[    3.100075]  [<ffffffff81221228>] __debug_object_init+0x29b/0x2c6
[    3.100075]  [<ffffffff81221244>] ? __debug_object_init+0x2b7/0x2c6
[    3.100075]  [<ffffffff81221267>] debug_object_init+0x14/0x16
[    3.100075]  [<ffffffff81098f20>] init_timer_key+0x23/0x65
[    3.100075]  [<ffffffff81210bbe>] kobject_release+0x90/0xba
[    3.100075]  [<ffffffff81210e3b>] kobject_put+0x4d/0x51
[    3.100075]  [<ffffffff81462ce4>] put_device+0x12/0x14
[    3.100075]  [<ffffffff814672f6>] platform_device_put+0x12/0x14
[    3.100075]  [<ffffffff8146767b>] platform_device_unregister+0x16/0x1a
[    3.100075]  [<ffffffff814610e7>] parport_pc_probe_port+0x7b7/0x7cc
[    3.100075]  [<ffffffff81e00a15>] parport_pc_init+0x2b0/0x317
[    3.100075]  [<ffffffff81e00765>] ? parport_setup+0x147/0x147
[    3.100075]  [<ffffffff81ddbe0c>] do_one_initcall+0x8e/0x132
[    3.100075]  [<ffffffff810a6c00>] ? param_array_set+0xa7/0xf2
[    3.100075]  [<ffffffff810a6e4d>] ? parse_args+0x1ad/0x26c
[    3.100075]  [<ffffffff81215c82>] ? strcpy+0x9/0x18
[    3.100075]  [<ffffffff81ddbfe2>] kernel_init_freeable+0x132/0x1bc
[    3.100075]  [<ffffffff81ddb6e3>] ? do_early_param+0x86/0x86
[    3.100075]  [<ffffffff81824c6f>] ? rest_init+0xc3/0xc3
[    3.100075]  [<ffffffff81824c78>] kernel_init+0x9/0xcc
[    3.100075]  [<ffffffff81835f7c>] ret_from_fork+0x7c/0xb0
[    3.100075]  [<ffffffff81824c6f>] ? rest_init+0xc3/0xc3
[    3.680292] tsc: Refined TSC clocksource calibration: 2693.463 MHz
[    4.028085] BUG: unable to handle kernel NULL pointer dereference at           (null)
[    4.030278] IP: [<          (null)>]           (null)
[    4.031880] PGD 0
[    4.032045] Oops: 0010 [#1] PREEMPT SMP DEBUG_PAGEALLOC
[    4.032045] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W    3.11.0-rc2-00010-gc817a67-dirty #21
[    4.032045] task: ffff88000010a040 ti: ffff88000010c000 task.ti: ffff88000010c000
[    4.032045] RIP: 0010:[<0000000000000000>]  [<          (null)>]           (null)
[    4.032045] RSP: 0000:ffff88000dc03e40  EFLAGS: 00010286
[    4.032045] RAX: 0000000000000000 RBX: 0000000000000100 RCX: 0000000000000000
[    4.032045] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
[    4.032045] RBP: ffff88000dc03e98 R08: 0000000000000002 R09: 0000000000000000
[    4.032045] R10: ffff88000dc03e58 R11: ffffffff81f08780 R12: ffff88000010dfd8
[    4.032045] R13: 0000000000000000 R14: 0000000000000000 R15: ffffffff81f097d8
[    4.032045] FS:  0000000000000000(0000) GS:ffff88000dc00000(0000) knlGS:0000000000000000
[    4.032045] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[    4.032045] CR2: 0000000000000000 CR3: 0000000001c15000 CR4: 00000000000006b0
[    4.032045] Stack:
[    4.032045]  ffffffff8109861e ffffffff810985b3 ffffffff81f08780 ffff880006de98d8
[    4.032045]  0000000000000000 0000000000000000 0000000000000000 ffffffff81f08780
[    4.032045]  ffff88000dc03ec8 ffffffff81f09fd8 ffffffff81f09bd8 ffff88000dc03f08
[    4.032045] Call Trace:
[    4.032045]  <IRQ>
[    4.032045]  [<ffffffff8109861e>] ? call_timer_fn+0x6b/0xde
[    4.032045]  [<ffffffff810985b3>] ? __internal_add_timer+0xc4/0xc4
[    4.032045]  [<ffffffff81098c49>] run_timer_softirq+0x187/0x1cf
[    4.032045]  [<ffffffff810951c4>] __do_softirq+0xc6/0x18f
[    4.032045]  [<ffffffff810953aa>] irq_exit+0x58/0x9e
[    4.032045]  [<ffffffff81044bab>] smp_apic_timer_interrupt+0x31/0x3e
[    4.032045]  [<ffffffff81836cb2>] apic_timer_interrupt+0x72/0x80
[    4.032045]  <EOI>
[    4.032045]  [<ffffffff818357b7>] ? retint_restore_args+0x13/0x13
[    4.032045]  [<ffffffff81098cda>] ? lock_timer_base.isra.17+0x49/0x4b
[    4.032045]  [<ffffffff8109922b>] try_to_del_timer_sync+0x27/0x5f
[    4.032045]  [<ffffffff81098435>] ? arch_local_irq_restore+0x6/0xd
[    4.032045]  [<ffffffff8109931b>] del_timer_sync+0xb8/0xcb
[    4.032045]  [<ffffffff81099263>] ? try_to_del_timer_sync+0x5f/0x5f
[    4.032045]  [<ffffffff810cd647>] ? arch_local_irq_restore+0x6/0xd
[    4.032045]  [<ffffffff81099372>] timer_fixup_init+0x16/0x2f
[    4.032045]  [<ffffffff81220ce3>] debug_object_fixup+0x15/0x1d
[    4.032045]  [<ffffffff81221228>] __debug_object_init+0x29b/0x2c6
[    4.032045]  [<ffffffff81221244>] ? __debug_object_init+0x2b7/0x2c6
[    4.032045]  [<ffffffff81221267>] debug_object_init+0x14/0x16
[    4.032045]  [<ffffffff81098f20>] init_timer_key+0x23/0x65
[    4.032045]  [<ffffffff81210bbe>] kobject_release+0x90/0xba
[    4.032045]  [<ffffffff81210e3b>] kobject_put+0x4d/0x51
[    4.032045]  [<ffffffff81462ce4>] put_device+0x12/0x14
[    4.032045]  [<ffffffff814672f6>] platform_device_put+0x12/0x14
[    4.032045]  [<ffffffff8146767b>] platform_device_unregister+0x16/0x1a
[    4.032045]  [<ffffffff814610e7>] parport_pc_probe_port+0x7b7/0x7cc
[    4.032045]  [<ffffffff81e00a15>] parport_pc_init+0x2b0/0x317
[    4.032045]  [<ffffffff81e00765>] ? parport_setup+0x147/0x147
[    4.032045]  [<ffffffff81ddbe0c>] do_one_initcall+0x8e/0x132
[    4.032045]  [<ffffffff810a6c00>] ? param_array_set+0xa7/0xf2
[    4.032045]  [<ffffffff810a6e4d>] ? parse_args+0x1ad/0x26c
[    4.032045]  [<ffffffff81215c82>] ? strcpy+0x9/0x18
[    4.032045]  [<ffffffff81ddbfe2>] kernel_init_freeable+0x132/0x1bc
[    4.032045]  [<ffffffff81ddb6e3>] ? do_early_param+0x86/0x86
[    4.032045]  [<ffffffff81824c6f>] ? rest_init+0xc3/0xc3
[    4.032045]  [<ffffffff81824c78>] kernel_init+0x9/0xcc
[    4.032045]  [<ffffffff81835f7c>] ret_from_fork+0x7c/0xb0
[    4.032045]  [<ffffffff81824c6f>] ? rest_init+0xc3/0xc3
[    4.032045] Code:  Bad RIP value.
[    4.032045] RIP  [<          (null)>]           (null)
[    4.032045]  RSP <ffff88000dc03e40>
[    4.032045] CR2: 0000000000000000
[    4.142753] ---[ end trace eb7906735b7816b8 ]---
[    4.144312] Kernel panic - not syncing: Fatal exception in interrupt
[    4.146076] Rebooting in 10 seconds..%                                                                                                  wfg@bee ~/linux/obj-compiletest%
wfg@bee ~/linux/obj-compiletest%
wfg@bee ~/linux/obj-compiletest% kvm-0day.sh arch/x86/boot/bzImage
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.11.0-rc2-00010-gc817a67-dirty (wfg@bee) (gcc version 4.6.3 (Debian 4.6.3-1) ) #22 SMP PREEMPT Tue Oct 8 12:14:43 CST 2013
[    0.000000] Command line: hung_task_panic=1 rcutree.rcu_cpu_stall_timeout=100 log_buf_len=8M debug sched_debug ignore_loglevel apic=debug dynamic_printk sysrq_always_enabled panic=10 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal  root=/dev/ram0 rw
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000fffdfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000fffe000-0x000000000fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] debug: ignoring loglevel setting.
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] Hypervisor detected: KVM
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0xfffe max_arch_pfn = 0x400000000
[    0.000000] Scan for SMP in [mem 0x00000000-0x000003ff]
[    0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff]
[    0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff]
[    0.000000] found SMP MP-table at [mem 0x000f1840-0x000f184f] mapped at [ffff8800000f1840]
[    0.000000]   mpc: f1850-f193c
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x027c1000, 0x027c1fff] PGTABLE
[    0.000000] BRK [0x027c2000, 0x027c2fff] PGTABLE
[    0.000000] BRK [0x027c3000, 0x027c3fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x0e600000-0x0e7fffff]
[    0.000000]  [mem 0x0e600000-0x0e7fffff] page 4k
[    0.000000] BRK [0x027c4000, 0x027c4fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x0c000000-0x0e5fffff]
[    0.000000]  [mem 0x0c000000-0x0e5fffff] page 4k
[    0.000000] BRK [0x027c5000, 0x027c5fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x00100000-0x0bffffff]
[    0.000000]  [mem 0x00100000-0x0bffffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x0e800000-0x0fffdfff]
[    0.000000]  [mem 0x0e800000-0x0fffdfff] page 4k
[    0.000000] log_buf_len: 8388608
[    0.000000] early log buf free: 128344(97%)
[    0.000000] RAMDISK: [mem 0x0e8d6000-0x0ffeffff]
[    0.000000] ACPI: RSDP 00000000000f16b0 00014 (v00 BOCHS )
[    0.000000] ACPI: RSDT 000000000fffe3f0 00034 (v01 BOCHS  BXPCRSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACP 000000000fffff80 00074 (v01 BOCHS  BXPCFACP 00000001 BXPC 00000001)
[    0.000000] ACPI: DSDT 000000000fffe430 01137 (v01   BXPC   BXDSDT 00000001 INTL 20100528)
[    0.000000] ACPI: FACS 000000000fffff40 00040
[    0.000000] ACPI: SSDT 000000000ffff6a0 00899 (v01 BOCHS  BXPCSSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: APIC 000000000ffff5b0 00080 (v01 BOCHS  BXPCAPIC 00000001 BXPC 00000001)
[    0.000000] ACPI: HPET 000000000ffff570 00038 (v01 BOCHS  BXPCHPET 00000001 BXPC 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] mapped APIC to ffffffffff5bb000 (        fee00000)
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000000] kvm-clock: cpu 0, msr 0:e896001, boot clock
[    0.000000] Zone ranges:
[    0.000000]   DMA32    [mem 0x00001000-0xffffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0x0fffdfff]
[    0.000000] On node 0 totalpages: 65436
[    0.000000]   DMA32 zone: 1024 pages used for memmap
[    0.000000]   DMA32 zone: 21 pages reserved
[    0.000000]   DMA32 zone: 65436 pages, LIFO batch:15
[    0.000000] ACPI: PM-Timer IO Port: 0xb008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] mapped APIC to ffffffffff5bb000 (        fee00000)
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04
[    0.000000] ACPI: IRQ5 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ10 used by override.
[    0.000000] ACPI: IRQ11 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] mapped IOAPIC to ffffffffff5ba000 (fec00000)
[    0.000000] nr_irqs_gsi: 40
[    0.000000] e820: [mem 0x10000000-0xfeffbfff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on KVM
[    0.000000] setup_percpu: NR_CPUS:4096 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 25 pages/cpu @ffff88000dc00000 s77904 r0 d24496 u1048576
[    0.000000] pcpu-alloc: s77904 r0 d24496 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1
[    0.000000] kvm-clock: cpu 0, msr 0:e896001, primary cpu clock
[    0.000000] KVM setup async PF for cpu 0
[    0.000000] kvm-stealtime: cpu 0, msr dc0ccc0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 64391
[    0.000000] Kernel command line: hung_task_panic=1 rcutree.rcu_cpu_stall_timeout=100 log_buf_len=8M debug sched_debug ignore_loglevel apic=debug dynamic_printk sysrq_always_enabled panic=10 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal  root=/dev/ram0 rw
[    0.000000] PID hash table entries: 1024 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 199988K/261744K available (7955K kernel code, 1639K rwdata, 3804K rodata, 840K init, 10060K bss, 61756K reserved)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  RCU debugfs-based tracing is enabled.
[    0.000000]  Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000]  Additional per-CPU info printed with stalls.
[    0.000000]  RCU restricting CPUs from NR_CPUS=4096 to nr_cpu_ids=2.
[    0.000000] NR_IRQS:262400 nr_irqs:512 16
[    0.000000] console [ttyS0] enabled
[    0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[    0.000000] ... MAX_LOCKDEP_SUBCLASSES:  8
[    0.000000] ... MAX_LOCK_DEPTH:          48
[    0.000000] ... MAX_LOCKDEP_KEYS:        8191
[    0.000000] ... CLASSHASH_SIZE:          4096
[    0.000000] ... MAX_LOCKDEP_ENTRIES:     16384
[    0.000000] ... MAX_LOCKDEP_CHAINS:      32768
[    0.000000] ... CHAINHASH_SIZE:          16384
[    0.000000]  memory used by lock dependency info: 5855 kB
[    0.000000]  per task-struct memory footprint: 1920 bytes
[    0.000000] ODEBUG: 15 of 15 active objects replaced
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Detected 2693.508 MHz processor
[    0.012000] Calibrating delay loop (skipped) preset value.. 5387.01 BogoMIPS (lpj=10774032)
[    0.013698] pid_max: default: 32768 minimum: 301
[    0.016308] Mount-cache hash table entries: 256
[    0.018249] Initializing cgroup subsys devices
[    0.020047] Initializing cgroup subsys perf_event
[    0.021577] Initializing cgroup subsys net_prio
[    0.023240] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.023240] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.023240] tlb_flushall_shift: 6
[    0.024053] debug: unmapping init [mem 0xffffffff81dea000-0xffffffff81dedfff]
[    0.028875] ACPI: Core revision 20130517
[    0.032939] ACPI: All ACPI Tables successfully acquired
[    0.034610] Getting VERSION: 50014
[    0.035430] Getting VERSION: 50014
[    0.036029] Getting ID: 0
[    0.036760] Getting ID: ff000000
[    0.037568] Getting LVT0: 8700
[    0.040017] Getting LVT1: 8400
[    0.040856] enabled ExtINT on CPU#0
[    0.042986] ENABLING IO-APIC IRQs
[    0.044020] init IO_APIC IRQs
[    0.044936]  apic 0 pin 0 not connected
[    0.045895] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1)
[    0.048038] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1)
[    0.050552] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1)
[    0.052032] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1)
[    0.053939] IOAPIC[0]: Set routing entry (0-5 -> 0x35 -> IRQ 5 Mode:1 Active:0 Dest:1)
[    0.056047] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1)
[    0.057972] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1)
[    0.060050] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1)
[    0.061986] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:1)
[    0.064031] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:1)
[    0.065976] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:1)
[    0.068028] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1)
[    0.069970] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1)
[    0.072031] IOAPIC[0]: Set routing entry (0-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1)
[    0.074026] IOAPIC[0]: Set routing entry (0-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1)
[    0.076037]  apic 0 pin 16 not connected
[    0.076966]  apic 0 pin 17 not connected
[    0.078161]  apic 0 pin 18 not connected
[    0.080010]  apic 0 pin 19 not connected
[    0.080961]  apic 0 pin 20 not connected
[    0.081918]  apic 0 pin 21 not connected
[    0.082870]  apic 0 pin 22 not connected
[    0.084009]  apic 0 pin 23 not connected
[    0.085113] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.086678] smpboot: CPU0: Intel Common KVM processor (fam: 0f, model: 06, stepping: 01)
[    0.088893] Using local APIC timer interrupts.
[    0.088893] calibrating APIC timer ...
[    0.092000] ... lapic delta = 6250087
[    0.092000] ... PM-Timer delta = 357976
[    0.092000] ... PM-Timer result ok
[    0.092000] ..... delta 6250087
[    0.092000] ..... mult: 268439192
[    0.092000] ..... calibration result: 4000055
[    0.092000] ..... CPU clock speed is 2693.2496 MHz.
[    0.092000] ..... host bus clock speed is 1000.0055 MHz.
[    0.092124] Performance Events: unsupported Netburst CPU model 6 no PMU driver, software events only.
[    0.116605] SMP alternatives: lockdep: fixing up alternatives
[    0.117947] smpboot: Booting Node   0, Processors  #1 OK
[    0.012000] kvm-clock: cpu 1, msr 0:e896041, secondary cpu clock
[    0.012000] masked ExtINT on CPU#1
[    0.140240] Brought up 2 CPUs
[    0.140157] KVM setup async PF for cpu 1
[    0.140157] kvm-stealtime: cpu 1, msr dd0ccc0
[    0.143049] smpboot: Total of 2 processors activated (10774.03 BogoMIPS)
[    0.144847] devtmpfs: initialized
[    0.148858] atomic64 test passed for x86-64 platform with CX8 and with SSE
[    0.151078] regulator-dummy: no parameters
[    0.152508] NET: Registered protocol family 16
[    0.155023] ACPI: bus type PCI registered
[    0.156136] PCI: Using configuration type 1 for base access
[    0.172142] ACPI: Added _OSI(Module Device)
[    0.176012] ACPI: Added _OSI(Processor Device)
[    0.179101] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.184042] ACPI: Added _OSI(Processor Aggregator Device)
[    0.196346] ACPI: EC: Look up EC in DSDT
[    0.208740] ACPI: Interpreter enabled
[    0.212051] ACPI: (supports S0 S5)
[    0.220033] ACPI: Using IOAPIC for interrupt routing
[    0.228118] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.251759] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.260270] PCI host bridge to bus 0000:00
[    0.264033] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.272053] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.280043] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.288041] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.296045] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff]
[    0.304165] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[    0.313051] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[    0.324650] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
[    0.335536] pci 0000:00:01.1: reg 0x20: [io  0xc060-0xc06f]
[    0.345036] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
[    0.352757] pci 0000:00:01.3: quirk: [io  0xb000-0xb03f] claimed by PIIX4 ACPI
[    0.360075] pci 0000:00:01.3: quirk: [io  0xb100-0xb10f] claimed by PIIX4 SMB
[    0.368363] pci 0000:00:02.0: [1013:00b8] type 00 class 0x030000
[    0.376977] pci 0000:00:02.0: reg 0x10: [mem 0xfc000000-0xfdffffff pref]
[    0.384098] pci 0000:00:02.0: reg 0x14: [mem 0xfebe2000-0xfebe2fff]
[    0.398050] pci 0000:00:02.0: reg 0x30: [mem 0xfebd0000-0xfebdffff pref]
[    0.400326] pci 0000:00:03.0: [1af4:1000] type 00 class 0x020000
[    0.402106] pci 0000:00:03.0: reg 0x10: [io  0xc040-0xc05f]
[    0.403586] pci 0000:00:03.0: reg 0x14: [mem 0xfebe1000-0xfebe1fff]
[    0.409798] pci 0000:00:03.0: reg 0x30: [mem 0xfebc0000-0xfebcffff pref]
[    0.411648] pci 0000:00:04.0: [8086:100e] type 00 class 0x020000
[    0.413737] pci 0000:00:04.0: reg 0x10: [mem 0xfeb80000-0xfeb9ffff]
[    0.421470] pci 0000:00:04.0: reg 0x14: [io  0xc000-0xc03f]
[    0.433221] pci 0000:00:04.0: reg 0x30: [mem 0xfeba0000-0xfebbffff pref]
[    0.436502] pci 0000:00:05.0: [8086:25ab] type 00 class 0x088000
[    0.440779] pci 0000:00:05.0: reg 0x10: [mem 0xfebe0000-0xfebe000f]
[    0.446977] pci_bus 0000:00: on NUMA node 0
[    0.448042] acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[    0.450299] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
[    0.454151] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[    0.456104] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[    0.457892] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[    0.460051] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[    0.461660] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
[    0.464000] ACPI: Enabled 16 GPEs in block 00 to 0F
[    0.464028] ACPI: \_SB_.PCI0: notify handler is installed
[    0.465457] Found 1 acpi root devices
[    0.468795] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.470217] vgaarb: loaded
[    0.470718] vgaarb: bridge control possible 0000:00:02.0
[    0.472759] ACPI: bus type USB registered
[    0.476267] usbcore: registered new interface driver usbfs
[    0.484139] usbcore: registered new interface driver hub
[    0.492170] usbcore: registered new device driver usb
[    0.493545] pps_core: LinuxPPS API ver. 1 registered
[    0.496013] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[    0.500095] PTP clock support registered
[    0.502250] wmi: Mapper loaded
[    0.504125] PCI: Using ACPI for IRQ routing
[    0.505850] PCI: pci_cache_line_size set to 64 bytes
[    0.508395] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.509797] e820: reserve RAM buffer [mem 0x0fffe000-0x0fffffff]
[    0.513378] NET: Registered protocol family 23
[    0.516151] cfg80211: Calling CRDA to update world regulatory domain
[    0.518134] nfc: nfc_init: NFC Core ver 0.1
[    0.519239] NET: Registered protocol family 39
[    0.520634] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.522382] Switched to clocksource kvm-clock
[    0.522382] pnp: PnP ACPI init
[    0.522382] ACPI: bus type PNP registered
[    0.523305] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:3)
[    0.527932] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.531607] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:3)
[    0.533928] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.535528] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:3)
[    0.538544] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.541921] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:3)
[    0.544325] pnp 00:03: [dma 2]
[    0.545142] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.546788] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:3)
[    0.548817] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.550737] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:3)
[    0.553113] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.555434] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.557211] pnp: PnP ACPI: found 7 devices
[    0.558190] ACPI: bus type PNP unregistered
[    0.565457] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.567761] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.569919] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.571599] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff]
[    0.573782] NET: Registered protocol family 2
[    0.579228] TCP established hash table entries: 2048 (order: 3, 32768 bytes)
[    0.581168] TCP bind hash table entries: 2048 (order: 5, 131072 bytes)
[    0.583208] TCP: Hash tables configured (established 2048 bind 2048)
[    0.584549] TCP: reno registered
[    0.585229] UDP hash table entries: 256 (order: 3, 40960 bytes)
[    0.586719] UDP-Lite hash table entries: 256 (order: 3, 40960 bytes)
[    0.588795] NET: Registered protocol family 1
[    0.591149] RPC: Registered named UNIX socket transport module.
[    0.593955] RPC: Registered udp transport module.
[    0.595475] RPC: Registered tcp transport module.
[    0.596559] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.597777] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[    0.598660] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[    0.599507] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[    0.600625] pci 0000:00:02.0: Boot video device
[    0.601888] PCI: CLS 0 bytes, default 64
[    0.610928] Unpacking initramfs...
[   10.140528] debug: unmapping init [mem 0xffff88000e8d6000-0xffff88000ffeffff]
[   10.144248] has_svm: not amd
[   10.144993] kvm: no hardware support
[   10.146393] camellia-x86_64: performance on this CPU would be suboptimal: disabling camellia-x86_64.
[   10.169508] blowfish-x86_64: performance on this CPU would be suboptimal: disabling blowfish-x86_64.
[   10.173099] cryptomgr_test (24) used greatest stack depth: 6376 bytes left
[   10.174958] twofish-x86_64-3way: performance on this CPU would be suboptimal: disabling twofish-x86_64-3way.
[   10.177600] sha1_ssse3: Neither AVX nor SSSE3 is available/usable.
[   10.179081] sha256_ssse3: Neither AVX nor SSSE3 is available/usable.
[   10.180727] sha512_ssse3: Neither AVX nor SSSE3 is available/usable.
[   10.182370] AVX or AES-NI instructions are not detected.
[   10.183684] AVX instructions are not detected.
[   10.187223] AVX instructions are not detected.
[   10.197195] AVX instructions are not detected.
[   10.217252] Initializing RT-Tester: OK
[   10.218174] audit: initializing netlink socket (disabled)
[   10.219489] type=2000 audit(1378709066.434:1): initialized
[   10.227569] DLM installed
[   10.236103] NFS: Registering the id_resolver key type
[   10.237595] Key type id_resolver registered
[   10.238589] Key type id_legacy registered
[   10.239538] Installing knfsd (copyright (C) 1996 [email protected]).
[   10.241989] ROMFS MTD (C) 2007 Red Hat, Inc.
[   10.243137] fuse init (API version 7.22)
[   10.245592] ceph: loaded (mds proto 32)
[   10.265890] cryptomgr_test (43) used greatest stack depth: 5752 bytes left
[   10.269355] cryptomgr_test (44) used greatest stack depth: 5680 bytes left
[   10.286967] cryptomgr_test (72) used greatest stack depth: 5264 bytes left
[   10.302112] alg: No test for crc32 (crc32-table)
[   10.304543] alg: No test for lz4hc (lz4hc-generic)
[   10.311259] alg: No test for stdrng (krng)
[   10.312372] NET: Registered protocol family 38
[   10.313410] Key type asymmetric registered
[   10.314414] Asymmetric key parser 'x509' registered
[   10.315390] test_string_helpers: Running tests...
[   10.317249] crc32: CRC_LE_BITS = 32, CRC_BE BITS = 32
[   10.318032] crc32: self tests passed, processed 225944 bytes in 301563 nsec
[   10.319879] crc32c: CRC_LE_BITS = 32
[   10.320906] crc32c: self tests passed, processed 225944 bytes in 151224 nsec
[   10.324227] cr_bllcd: INTEL CARILLO RANCH LPC not found.
[   10.325645] cr_bllcd: Carillo Ranch Backlight Driver Initialized.
[   10.327802] VIA Graphics Integration Chipset framebuffer 2.4 initializing
[   10.329904] vmlfb: initializing
[   10.330825] Could not find Carillo Ranch MCH device.
[   10.332257] no IO addresses supplied
[   10.333471] hgafb: HGA card not detected.
[   10.334388] hgafb: probe of hgafb.0 failed with error -22
[   10.336873] usbcore: registered new interface driver udlfb
[   10.338233] usbcore: registered new interface driver smscufx
[   10.353036] uvesafb: failed to execute /sbin/v86d
[   10.355344] uvesafb: make sure that the v86d helper is installed and executable
[   10.361011] uvesafb: Getting VBE info block failed (eax=0x4f00, err=-2)
[   10.365492] uvesafb: vbe_init() failed with -22
[   10.368418] uvesafb: probe of uvesafb.0 failed with error -22
[   10.372332] ipmi message handler version 39.2
[   10.375073] ipmi device interface
[   10.377364] IPMI System Interface driver.
[   10.379988] ipmi_si: Adding default-specified kcs state machine
[   10.383827] ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
[   10.391212] ipmi_si: Interface detection failed
[   10.404239] ipmi_si: Adding default-specified smic state machine
[   10.405307] ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0
[   10.406943] ipmi_si: Interface detection failed
[   10.416538] ipmi_si: Adding default-specified bt state machine
[   10.417504] ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0
[   10.418985] ipmi_si: Interface detection failed
[   10.428333] kobject: 'ipmi_si' (ffff880007762a00): kobject_release, parent ffff8800001b7648 (delayed)
[   10.429911] kobject: 'ipmi_si' (ffff880007762800): kobject_release, parent ffff880000283648 (delayed)
[   10.431438] kobject: 'ipmi_si' (ffff880007762c00): kobject_release, parent ffff880000189248 (delayed)
[   10.432991] ipmi_si: Unable to find any System Interface(s)
[   10.433817] IPMI Watchdog: driver initialized
[   10.434544] Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot.
[   10.436091] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[   10.437181] ACPI: Power Button [PWRF]
[   10.479088] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[   10.503653] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   10.507240] Applicom driver: $Id: ac.c,v 1.30 2000/03/22 16:03:57 dwmw2 Exp $
[   10.511083] ac.o: No PCI boards found.
[   10.513021] ac.o: For an ISA board you must supply memory and irq parameters.
[   10.517090] Non-volatile memory driver v1.3
[   10.521879] Linux agpgart interface v0.103
[   10.524628] [drm:drm_core_init] *ERROR* Cannot create /proc/dri
[   10.527719] kobject: 'drm' (ffff880006dd9048): kobject_release, parent ffff880000189648 (delayed)
[   10.532338] kobject: 'drm' (ffff880006dd6000): kobject_release, parent           (null) (delayed)
[   10.537837] [drm] radeon kernel modesetting enabled.
[   10.541277] [drm:drm_proc_init] *ERROR* Cannot create /proc/dri/0
[   10.544482] [drm:drm_get_minor] *ERROR* DRM: Failed to initialize /proc/dri.
[   10.548758] kobject: 'controlD64' (ffff880006dee820): kobject_release, parent           (null) (delayed)
[   10.559167] cirrus: probe of 0000:00:02.0 failed with error -1
[   10.560675] usbcore: registered new interface driver udl
[   10.564477] parport_pc 00:04: reported by Plug and Play ACPI
[   10.566322] parport0: PC-style at 0x378, irq 7 [PCSPP(,...)]
[   10.568845] kobject: 'parport_pc.956' (ffff880006dee820): kobject_release, parent           (null) (delayed)
[   10.573899] ------------[ cut here ]------------
[   10.576040] WARNING: CPU: 1 PID: 1 at /c/wfg/linux/lib/debugobjects.c:260 debug_print_object+0x7c/0x8d()
[   10.577824] ODEBUG: init active (active state 0) object type: timer_list hint:           (null)
[   10.577824] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.11.0-rc2-00010-gc817a67-dirty #22
[   10.577824]  0000000000000104 ffff88000010db78 ffffffff817b80f8 0000000000000000
[   10.577824]  ffff88000010dbc8 ffff88000010dbb8 ffffffff8108f040 0000000000000046
[   10.577824]  ffffffff81220eaa ffffffff81b60506 ffff880006ddb768 ffffffff81ba02d0
[   10.577824] Call Trace:
[   10.577824]  [<ffffffff817b80f8>] dump_stack+0x4f/0x84
[   10.577824]  [<ffffffff8108f040>] warn_slowpath_common+0x72/0x8c
[   10.577824]  [<ffffffff81220eaa>] ? debug_print_object+0x7c/0x8d
[   10.577824]  [<ffffffff8108f0be>] warn_slowpath_fmt+0x41/0x43
[   10.577824]  [<ffffffff81220eaa>] debug_print_object+0x7c/0x8d
[   10.577824]  [<ffffffff81221209>] __debug_object_init+0x27c/0x2c6
[   10.577824]  [<ffffffff81221244>] ? __debug_object_init+0x2b7/0x2c6
[   10.577824]  [<ffffffff81221267>] debug_object_init+0x14/0x16
[   10.577824]  [<ffffffff81098f20>] init_timer_key+0x23/0x65
[   10.577824]  [<ffffffff81210bbe>] kobject_release+0x90/0xba
[   10.577824]  [<ffffffff81210e3b>] kobject_put+0x4d/0x51
[   10.577824]  [<ffffffff813effd3>] put_device+0x12/0x14
[   10.577824]  [<ffffffff813f45e5>] platform_device_put+0x12/0x14
[   10.577824]  [<ffffffff813f496a>] platform_device_unregister+0x16/0x1a
[   10.577824]  [<ffffffff813ee3d6>] parport_pc_probe_port+0x7b7/0x7cc
[   10.577824]  [<ffffffff81d519e2>] parport_pc_init+0x2b0/0x317
[   10.577824]  [<ffffffff81d51732>] ? parport_setup+0x147/0x147
[   10.577824]  [<ffffffff81d2ce0c>] do_one_initcall+0x8e/0x132
[   10.577824]  [<ffffffff810a6c00>] ? param_array_set+0xa7/0xf2
[   10.577824]  [<ffffffff810a6e4d>] ? parse_args+0x1ad/0x26c
[   10.577824]  [<ffffffff81d2cfe2>] kernel_init_freeable+0x132/0x1bc
[   10.577824]  [<ffffffff81d2c6e3>] ? do_early_param+0x86/0x86
[   10.577824]  [<ffffffff817b1f5f>] ? rest_init+0xc3/0xc3
[   10.577824]  [<ffffffff817b1f68>] kernel_init+0x9/0xcc
[   10.577824]  [<ffffffff817c31bc>] ret_from_fork+0x7c/0xb0
[   10.577824]  [<ffffffff817b1f5f>] ? rest_init+0xc3/0xc3
[   10.577824] ---[ end trace 5ba675dcca8b802b ]---
[   10.663168] INFO: trying to register non-static key.
[   10.665566] the code is fine but needs lockdep annotation.
[   10.667133] turning off the locking correctness validator.
[   10.667133] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G        W    3.11.0-rc2-00010-gc817a67-dirty #22
[   10.667133]  0000000000000046 ffff88000010da28 ffffffff817b80f8 0000000000000000
[   10.667133]  0000000000000000 ffff88000010daa8 ffffffff810c56de ffff88000010da88
[   10.667133]  ffffffff81090497 0000000000007aa4 0000000000000046 ffff88000010da78
[   10.667133] Call Trace:
[   10.667133]  [<ffffffff817b80f8>] dump_stack+0x4f/0x84
[   10.667133]  [<ffffffff810c56de>] register_lock_class+0x104/0x2b2
[   10.667133]  [<ffffffff81090497>] ? console_unlock+0x35b/0x36a
[   10.667133]  [<ffffffff810c798e>] __lock_acquire+0xf6/0xe3c
[   10.667133]  [<ffffffff817c29f7>] ? retint_restore_args+0x13/0x13
[   10.667133]  [<ffffffff810c6c25>] ? trace_hardirqs_on_caller+0x154/0x18b
[   10.667133]  [<ffffffff810c8afd>] lock_acquire+0x7e/0x99
[   10.667133]  [<ffffffff81099263>] ? try_to_del_timer_sync+0x5f/0x5f
[   10.667133]  [<ffffffff810992ac>] del_timer_sync+0x49/0xcb
[   10.667133]  [<ffffffff81099263>] ? try_to_del_timer_sync+0x5f/0x5f
[   10.667133]  [<ffffffff810cd647>] ? arch_local_irq_restore+0x6/0xd
[   10.667133]  [<ffffffff81099372>] timer_fixup_init+0x16/0x2f
[   10.667133]  [<ffffffff81220ce3>] debug_object_fixup+0x15/0x1d
[   10.667133]  [<ffffffff81221228>] __debug_object_init+0x29b/0x2c6
[   10.667133]  [<ffffffff81221244>] ? __debug_object_init+0x2b7/0x2c6
[   10.667133]  [<ffffffff81221267>] debug_object_init+0x14/0x16
[   10.667133]  [<ffffffff81098f20>] init_timer_key+0x23/0x65
[   10.667133]  [<ffffffff81210bbe>] kobject_release+0x90/0xba
[   10.667133]  [<ffffffff81210e3b>] kobject_put+0x4d/0x51
[   10.667133]  [<ffffffff813effd3>] put_device+0x12/0x14
[   10.667133]  [<ffffffff813f45e5>] platform_device_put+0x12/0x14
[   10.667133]  [<ffffffff813f496a>] platform_device_unregister+0x16/0x1a
[   10.667133]  [<ffffffff813ee3d6>] parport_pc_probe_port+0x7b7/0x7cc
[   10.667133]  [<ffffffff81d519e2>] parport_pc_init+0x2b0/0x317
[   10.667133]  [<ffffffff81d51732>] ? parport_setup+0x147/0x147
[   10.667133]  [<ffffffff81d2ce0c>] do_one_initcall+0x8e/0x132
[   10.667133]  [<ffffffff810a6c00>] ? param_array_set+0xa7/0xf2
[   10.667133]  [<ffffffff810a6e4d>] ? parse_args+0x1ad/0x26c
[   10.667133]  [<ffffffff81d2cfe2>] kernel_init_freeable+0x132/0x1bc
[   10.667133]  [<ffffffff81d2c6e3>] ? do_early_param+0x86/0x86
[   10.667133]  [<ffffffff817b1f5f>] ? rest_init+0xc3/0xc3
[   10.667133]  [<ffffffff817b1f68>] kernel_init+0x9/0xcc
[   10.667133]  [<ffffffff817c31bc>] ret_from_fork+0x7c/0xb0
[   10.667133]  [<ffffffff817b1f5f>] ? rest_init+0xc3/0xc3
[   11.144157] tsc: Refined TSC clocksource calibration: 2693.465 MHz
[   11.556083] BUG: unable to handle kernel NULL pointer dereference at           (null)
[   11.557559] IP: [<          (null)>]           (null)
[   11.558515] PGD 0
[   11.558942] Oops: 0010 [#1] PREEMPT SMP DEBUG_PAGEALLOC
[   11.559992] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G        W    3.11.0-rc2-00010-gc817a67-dirty #22
[   11.560059] task: ffff8800001422c0 ti: ffff880000144000 task.ti: ffff880000144000
[   11.560059] RIP: 0010:[<0000000000000000>]  [<          (null)>]           (null)
[   11.560059] RSP: 0000:ffff88000dd03e40  EFLAGS: 00010286
[   11.560059] RAX: 0000000000000000 RBX: 0000000000000101 RCX: 0000000000000000
[   11.560059] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
[   11.560059] RBP: ffff88000dd03e98 R08: 0000000000000002 R09: 0000000000000000
[   11.560059] R10: ffff88000dd03e58 R11: ffff88000015c000 R12: ffff880000145fd8
[   11.560059] R13: 0000000000000000 R14: 0000000000000000 R15: ffff88000015d058
[   11.560059] FS:  0000000000000000(0000) GS:ffff88000dd00000(0000) knlGS:0000000000000000
[   11.560059] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[   11.560059] CR2: 0000000000000000 CR3: 0000000001b87000 CR4: 00000000000006a0
[   11.560059] Stack:
[   11.560059]  ffffffff8109861e ffffffff810985b3 ffff88000015c000 ffff880006dee8d8
[   11.560059]  0000000000000000 0000000000000000 0000000000000000 ffff88000015c000
[   11.560059]  ffff88000dd03ec8 ffff88000015d858 ffff88000015d458 ffff88000dd03f08
[   11.560059] Call Trace:
[   11.560059]  <IRQ>
[   11.560059]  [<ffffffff8109861e>] ? call_timer_fn+0x6b/0xde
[   11.560059]  [<ffffffff810985b3>] ? __internal_add_timer+0xc4/0xc4
[   11.560059]  [<ffffffff81098c49>] run_timer_softirq+0x187/0x1cf
[   11.560059]  [<ffffffff810951c4>] __do_softirq+0xc6/0x18f
[   11.560059]  [<ffffffff810953aa>] irq_exit+0x58/0x9e
[   11.560059]  [<ffffffff81044bab>] smp_apic_timer_interrupt+0x31/0x3e
[   11.560059]  [<ffffffff817c3ef2>] apic_timer_interrupt+0x72/0x80
[   11.560059]  <EOI>
[   11.560059]  [<ffffffff810c8a73>] ? lock_release+0x16e/0x17a
[   11.560059]  [<ffffffff810304be>] ? default_idle+0xe/0x1c
[   11.560059]  [<ffffffff81049eda>] ? native_safe_halt+0x6/0x8
[   11.560059]  [<ffffffff810c6c69>] ? trace_hardirqs_on+0xd/0xf
[   11.560059]  [<ffffffff810304c3>] default_idle+0x13/0x1c
[   11.560059]  [<ffffffff81030c33>] arch_cpu_idle+0x13/0x21
[   11.560059]  [<ffffffff810bd035>] cpu_startup_entry+0xfc/0x164
[   11.560059]  [<ffffffff810434c5>] start_secondary+0x1f0/0x1f7
[   11.560059] Code:  Bad RIP value.
[   11.560059] RIP  [<          (null)>]           (null)
[   11.560059]  RSP <ffff88000dd03e40>
[   11.560059] CR2: 0000000000000000
[   11.634717] ---[ end trace 5ba675dcca8b802c ]---
[   11.635882] Kernel panic - not syncing: Fatal exception in interrupt
[   11.637620] Rebooting in 10 seconds..

#
# Automatically generated file; DO NOT EDIT.
# Linux/x86_64 3.11.0-rc2 Kernel Configuration
#
CONFIG_64BIT=y
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_ARCH_HAS_CPU_AUTOPROBE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ZONE_DMA32=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_X86_64_SMP=y
CONFIG_X86_HT=y
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11" CONFIG_ARCH_CPU_PROBE_RELEASE=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y

#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
CONFIG_COMPILE_TEST=y
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
# CONFIG_SYSVIPC is not set
CONFIG_POSIX_MQUEUE=y
# CONFIG_FHANDLE is not set
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_WATCH=y
CONFIG_AUDIT_TREE=y
# CONFIG_AUDIT_LOGINUID_IMMUTABLE is not set
CONFIG_HAVE_GENERIC_HARDIRQS=y

#
# IRQ subsystem
#
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_DEBUG=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y

#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
# CONFIG_NO_HZ_FULL is not set
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y

#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
# CONFIG_IRQ_TIME_ACCOUNTING is not set
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y

#
# RCU Subsystem
#
CONFIG_TREE_PREEMPT_RCU=y
CONFIG_PREEMPT_RCU=y
CONFIG_RCU_STALL_COMMON=y
# CONFIG_RCU_USER_QS is not set
CONFIG_RCU_FANOUT=64
CONFIG_RCU_FANOUT_LEAF=16
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_RCU_FAST_NO_HZ is not set
CONFIG_TREE_RCU_TRACE=y
# CONFIG_RCU_BOOST is not set
CONFIG_RCU_NOCB_CPU=y
CONFIG_RCU_NOCB_CPU_NONE=y
# CONFIG_RCU_NOCB_CPU_ZERO is not set
# CONFIG_RCU_NOCB_CPU_ALL is not set
CONFIG_IKCONFIG=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_ARCH_WANTS_PROT_NUMA_PROT_NONE=y
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
# CONFIG_CGROUP_FREEZER is not set
CONFIG_CGROUP_DEVICE=y
CONFIG_CPUSETS=y
# CONFIG_PROC_PID_CPUSET is not set
# CONFIG_CGROUP_CPUACCT is not set
# CONFIG_RESOURCE_COUNTERS is not set
CONFIG_CGROUP_PERF=y
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_CFS_BANDWIDTH=y
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_CHECKPOINT_RESTORE=y
# CONFIG_NAMESPACES is not set
CONFIG_UIDGID_CONVERTED=y
# CONFIG_UIDGID_STRICT_TYPE_CHECKS is not set
CONFIG_SCHED_AUTOGROUP=y
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
# CONFIG_RD_XZ is not set
# CONFIG_RD_LZO is not set
# CONFIG_RD_LZ4 is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_ANON_INODES=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_EXPERT=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_PRINTK=y
CONFIG_BUG=y
# CONFIG_PCSPKR_PLATFORM is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_PCI_QUIRKS=y
CONFIG_EMBEDDED=y
CONFIG_HAVE_PERF_EVENTS=y

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
# CONFIG_JUMP_LABEL is not set
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_SOFT_DIRTY=y
CONFIG_MODULES_USE_ELF_RELA=y

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_STOP_MACHINE=y
# CONFIG_BLOCK is not set
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_PADATA=y
CONFIG_ASN1=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
# CONFIG_FREEZER is not set

#
# Processor type and features
#
# CONFIG_ZONE_DMA is not set
CONFIG_SMP=y
CONFIG_X86_MPPARSE=y
# CONFIG_X86_EXTENDED_PLATFORM is not set
# CONFIG_X86_INTEL_LPSS is not set
# CONFIG_SCHED_OMIT_FRAME_POINTER is not set
CONFIG_HYPERVISOR_GUEST=y
CONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_DEBUG is not set
# CONFIG_PARAVIRT_SPINLOCKS is not set
# CONFIG_XEN is not set
# CONFIG_XEN_PRIVILEGED_GUEST is not set
CONFIG_KVM_GUEST=y
# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set
CONFIG_PARAVIRT_CLOCK=y
CONFIG_NO_BOOTMEM=y
CONFIG_MEMTEST=y
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
# CONFIG_PROCESSOR_SELECT is not set
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_HPET_TIMER=y
# CONFIG_DMI is not set
# CONFIG_GART_IOMMU is not set
CONFIG_CALGARY_IOMMU=y
CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT=y
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
CONFIG_MAXSMP=y
CONFIG_NR_CPUS=4096
# CONFIG_SCHED_SMT is not set
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_COUNT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
# CONFIG_X86_MCE is not set
CONFIG_I8K=y
CONFIG_MICROCODE=y
# CONFIG_MICROCODE_INTEL is not set
# CONFIG_MICROCODE_AMD is not set
CONFIG_MICROCODE_OLD_INTERFACE=y
# CONFIG_MICROCODE_INTEL_EARLY is not set
# CONFIG_MICROCODE_AMD_EARLY is not set
CONFIG_MICROCODE_EARLY=y
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_DIRECT_GBPAGES=y
# CONFIG_NUMA is not set
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
# CONFIG_SPARSEMEM_VMEMMAP is not set
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=999999
# CONFIG_COMPACTION is not set
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
# CONFIG_TRANSPARENT_HUGEPAGE is not set
CONFIG_CROSS_MEMORY_ATTACH=y
# CONFIG_CLEANCACHE is not set
# CONFIG_ZBUD is not set
CONFIG_MEM_SOFT_DIRTY=y
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_X86_RESERVE_LOW=64
# CONFIG_MTRR is not set
# CONFIG_ARCH_RANDOM is not set
CONFIG_X86_SMAP=y
# CONFIG_EFI is not set
# CONFIG_SECCOMP is not set
CONFIG_CC_STACKPROTECTOR=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_SCHED_HRTICK=y
# CONFIG_KEXEC is not set
CONFIG_CRASH_DUMP=y
CONFIG_PHYSICAL_START=0x1000000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_HOTPLUG_CPU=y
CONFIG_BOOTPARAM_HOTPLUG_CPU0=y
# CONFIG_DEBUG_HOTPLUG_CPU0 is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y

#
# Power management and ACPI options
#
# CONFIG_SUSPEND is not set
CONFIG_PM_RUNTIME=y
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_ADVANCED_DEBUG is not set
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
CONFIG_ACPI=y
# CONFIG_ACPI_EC_DEBUGFS is not set
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=y
CONFIG_ACPI_FAN=y
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_I2C=y
CONFIG_ACPI_PROCESSOR=y
# CONFIG_ACPI_IPMI is not set
CONFIG_ACPI_HOTPLUG_CPU=y
# CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_CUSTOM_DSDT_FILE=""
# CONFIG_ACPI_CUSTOM_DSDT is not set
# CONFIG_ACPI_INITRD_TABLE_OVERRIDE is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_PCI_SLOT is not set
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
# CONFIG_ACPI_SBS is not set
# CONFIG_ACPI_HED is not set
# CONFIG_ACPI_CUSTOM_METHOD is not set
# CONFIG_ACPI_APEI is not set
# CONFIG_SFI is not set

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y CONFIG_CPU_FREQ_GOV_COMMON=y CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_POWERSAVE=y
# CONFIG_CPU_FREQ_GOV_USERSPACE is not set CONFIG_CPU_FREQ_GOV_ONDEMAND=y CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y

#

# x86 CPU frequency scaling drivers
#
# CONFIG_X86_INTEL_PSTATE is not set
# CONFIG_X86_PCC_CPUFREQ is not set
# CONFIG_X86_ACPI_CPUFREQ is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_P4_CLOCKMOD is not set

#

# shared options
#
# CONFIG_X86_SPEEDSTEP_LIB is not set
CONFIG_CPU_IDLE=y
# CONFIG_CPU_IDLE_MULTIPLE_DRIVERS is not set
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
# CONFIG_INTEL_IDLE is not set

#
# Memory power savings
#
CONFIG_I7300_IDLE_IOAT_CHANNEL=y
CONFIG_I7300_IDLE=y

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
# CONFIG_PCI_MMCONFIG is not set
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_CNB20LE_QUIRK is not set
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
# CONFIG_PCIE_ECRC is not set
CONFIG_PCIEAER_INJECT=y
CONFIG_PCIEASPM=y
CONFIG_PCIEASPM_DEBUG=y
# CONFIG_PCIEASPM_DEFAULT is not set
CONFIG_PCIEASPM_POWERSAVE=y
# CONFIG_PCIEASPM_PERFORMANCE is not set
CONFIG_PCIE_PME=y
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_DEBUG is not set
CONFIG_PCI_REALLOC_ENABLE_AUTO=y
# CONFIG_PCI_STUB is not set
CONFIG_HT_IRQ=y
# CONFIG_PCI_IOV is not set
# CONFIG_PCI_PRI is not set
# CONFIG_PCI_PASID is not set
# CONFIG_PCI_IOAPIC is not set
CONFIG_PCI_LABEL=y

#
# PCI host controller drivers
#
# CONFIG_ISA_DMA_API is not set
CONFIG_AMD_NB=y
CONFIG_PCCARD=y
CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_CARDBUS=y

#
# PC-card bridges
#
# CONFIG_YENTA is not set
CONFIG_PD6729=y
# CONFIG_I82092 is not set
CONFIG_PCCARD_NONSTATIC=y
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_RAPIDIO is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
CONFIG_BINFMT_SCRIPT=y
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_COREDUMP is not set
# CONFIG_IA32_EMULATION is not set
CONFIG_HAVE_TEXT_POKE_SMP=y
CONFIG_X86_DEV_DMA_OPS=y
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_DIAG is not set
CONFIG_UNIX=y
# CONFIG_UNIX_DIAG is not set
CONFIG_XFRM=y
CONFIG_XFRM_ALGO=y
# CONFIG_XFRM_USER is not set
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
# CONFIG_IP_FIB_TRIE_STATS is not set
# CONFIG_IP_MULTIPLE_TABLES is not set
# CONFIG_IP_ROUTE_MULTIPATH is not set
# CONFIG_IP_ROUTE_VERBOSE is not set
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_IP_PNP_RARP is not set
CONFIG_NET_IPIP=y
CONFIG_NET_IPGRE_DEMUX=y
CONFIG_NET_IP_TUNNEL=y
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_NET_IPVTI=y
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
CONFIG_INET_TUNNEL=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
CONFIG_INET_UDP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
CONFIG_NETWORK_SECMARK=y
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
CONFIG_IP_SCTP=y
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5 is not set
CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1=y
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set
CONFIG_SCTP_COOKIE_HMAC_MD5=y
CONFIG_SCTP_COOKIE_HMAC_SHA1=y
CONFIG_RDS=y
# CONFIG_RDS_TCP is not set
CONFIG_RDS_DEBUG=y
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
CONFIG_L2TP=y
# CONFIG_L2TP_DEBUGFS is not set
# CONFIG_L2TP_V3 is not set
CONFIG_STP=y
CONFIG_GARP=y
CONFIG_BRIDGE=y
# CONFIG_BRIDGE_IGMP_SNOOPING is not set
# CONFIG_BRIDGE_VLAN_FILTERING is not set
CONFIG_VLAN_8021Q=y
CONFIG_VLAN_8021Q_GVRP=y
# CONFIG_VLAN_8021Q_MVRP is not set
CONFIG_DECNET=y
CONFIG_DECNET_ROUTER=y
CONFIG_LLC=y
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
CONFIG_X25=y
CONFIG_LAPB=y
CONFIG_PHONET=y
CONFIG_IEEE802154=y
# CONFIG_MAC802154 is not set
# CONFIG_NET_SCHED is not set
CONFIG_DCB=y
CONFIG_DNS_RESOLVER=y
# CONFIG_BATMAN_ADV is not set
# CONFIG_OPENVSWITCH is not set
# CONFIG_VSOCKETS is not set
CONFIG_NETLINK_MMAP=y
# CONFIG_NETLINK_DIAG is not set
CONFIG_NET_MPLS_GSO=y
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
CONFIG_NETPRIO_CGROUP=y
CONFIG_NET_LL_RX_POLL=y
CONFIG_BQL=y
CONFIG_NET_FLOW_LIMIT=y

#
# Network testing
#
CONFIG_HAMRADIO=y

#
# Packet Radio protocols
#
# CONFIG_AX25 is not set
# CONFIG_CAN is not set
CONFIG_IRDA=y

#
# IrDA protocols
#
CONFIG_IRLAN=y
# CONFIG_IRCOMM is not set
CONFIG_IRDA_ULTRA=y

#
# IrDA options
#
# CONFIG_IRDA_CACHE_LAST_LSAP is not set
# CONFIG_IRDA_FAST_RR is not set
# CONFIG_IRDA_DEBUG is not set

#
# Infrared-port device drivers
#

#
# SIR device drivers
#
# CONFIG_IRTTY_SIR is not set

#
# Dongle support
#
CONFIG_KINGSUN_DONGLE=y
CONFIG_KSDAZZLE_DONGLE=y
CONFIG_KS959_DONGLE=y

#
# FIR device drivers
#
CONFIG_USB_IRDA=y
CONFIG_SIGMATEL_FIR=y
CONFIG_VLSI_FIR=y
CONFIG_MCS_FIR=y
# CONFIG_BT is not set
CONFIG_AF_RXRPC=y
CONFIG_AF_RXRPC_DEBUG=y
CONFIG_RXKAD=y
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_CFG80211=y
CONFIG_NL80211_TESTMODE=y
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_REG_DEBUG is not set
CONFIG_CFG80211_CERTIFICATION_ONUS=y
# CONFIG_CFG80211_DEFAULT_PS is not set
CONFIG_CFG80211_DEBUGFS=y
# CONFIG_CFG80211_INTERNAL_REGDB is not set
# CONFIG_CFG80211_WEXT is not set
# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
CONFIG_WIMAX=y
CONFIG_WIMAX_DEBUG_LEVEL=8
CONFIG_RFKILL=y
CONFIG_RFKILL_LEDS=y
# CONFIG_RFKILL_INPUT is not set
# CONFIG_RFKILL_REGULATOR is not set
# CONFIG_NET_9P is not set
CONFIG_CAIF=y
CONFIG_CAIF_DEBUG=y
CONFIG_CAIF_NETDEV=y
CONFIG_CAIF_USB=y
CONFIG_CEPH_LIB=y
# CONFIG_CEPH_LIB_PRETTYDEBUG is not set
# CONFIG_CEPH_LIB_USE_DNS_RESOLVER is not set
CONFIG_NFC=y
CONFIG_NFC_NCI=y
CONFIG_NFC_NCI_SPI=y
CONFIG_NFC_HCI=y
CONFIG_NFC_SHDLC=y

#
# Near Field Communication (NFC) devices
#
CONFIG_NFC_PN533=y
# CONFIG_NFC_SIM is not set
CONFIG_NFC_PN544=y
CONFIG_NFC_PN544_I2C=y
CONFIG_NFC_MICROREAD=y
# CONFIG_NFC_MICROREAD_I2C is not set
CONFIG_HAVE_BPF_JIT=y

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
# CONFIG_DEVTMPFS_MOUNT is not set
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
# CONFIG_DEBUG_DRIVER is not set
CONFIG_DEBUG_DEVRES=y
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_SPI=y
CONFIG_REGMAP_MMIO=y
CONFIG_REGMAP_IRQ=y
CONFIG_DMA_SHARED_BUFFER=y

#
# Bus devices
#
CONFIG_CONNECTOR=y
# CONFIG_PROC_EVENTS is not set
CONFIG_MTD=y
CONFIG_MTD_REDBOOT_PARTS=y
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
CONFIG_MTD_REDBOOT_PARTS_READONLY=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_AR7_PARTS=y

#
# User Modules And Translation Layers
#
CONFIG_MTD_OOPS=y

#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
CONFIG_MTD_GEN_PROBE=y
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_CFI_STAA=y
CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_RAM=y
CONFIG_MTD_ROM=y
CONFIG_MTD_ABSENT=y

#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_PHYSMAP_COMPAT=y
CONFIG_MTD_PHYSMAP_START=0x8000000
CONFIG_MTD_PHYSMAP_LEN=0
CONFIG_MTD_PHYSMAP_BANKWIDTH=2
CONFIG_MTD_SC520CDP=y
# CONFIG_MTD_NETSC520 is not set
CONFIG_MTD_TS5500=y
CONFIG_MTD_SBC_GXX=y
CONFIG_MTD_AMD76XROM=y
# CONFIG_MTD_ICHXROM is not set
CONFIG_MTD_ESB2ROM=y
# CONFIG_MTD_CK804XROM is not set
CONFIG_MTD_SCB2_FLASH=y
# CONFIG_MTD_NETtel is not set
# CONFIG_MTD_L440GX is not set
# CONFIG_MTD_PCI is not set
# CONFIG_MTD_PCMCIA is not set
CONFIG_MTD_GPIO_ADDR=y
CONFIG_MTD_INTEL_VR_NOR=y
CONFIG_MTD_PLATRAM=y
CONFIG_MTD_LATCH_ADDR=y

#
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
# CONFIG_MTD_DATAFLASH is not set
CONFIG_MTD_M25P80=y
# CONFIG_M25PXX_USE_FAST_READ is not set
CONFIG_MTD_SST25L=y
CONFIG_MTD_SLRAM=y
CONFIG_MTD_PHRAM=y
# CONFIG_MTD_MTDRAM is not set

#
# Disk-On-Chip Device Drivers
#
CONFIG_MTD_DOCG3=y
CONFIG_BCH_CONST_M=14
CONFIG_BCH_CONST_T=4
CONFIG_MTD_NAND_ECC=y
# CONFIG_MTD_NAND_ECC_SMC is not set
CONFIG_MTD_NAND=y
# CONFIG_MTD_NAND_ECC_BCH is not set
# CONFIG_MTD_SM_COMMON is not set
CONFIG_MTD_NAND_DENALI=y
# CONFIG_MTD_NAND_DENALI_PCI is not set
CONFIG_MTD_NAND_IDS=y
# CONFIG_MTD_NAND_RICOH is not set
CONFIG_MTD_NAND_DISKONCHIP=y
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y
CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
# CONFIG_MTD_NAND_DOCG4 is not set
CONFIG_MTD_NAND_CAFE=y
CONFIG_MTD_NAND_NANDSIM=y
# CONFIG_MTD_NAND_PLATFORM is not set
# CONFIG_MTD_ALAUDA is not set
CONFIG_MTD_ONENAND=y
# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
# CONFIG_MTD_ONENAND_GENERIC is not set
# CONFIG_MTD_ONENAND_OTP is not set
CONFIG_MTD_ONENAND_2X_PROGRAM=y

#
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
# CONFIG_MTD_UBI is not set
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
# CONFIG_PARPORT_SERIAL is not set
# CONFIG_PARPORT_PC_FIFO is not set
CONFIG_PARPORT_PC_SUPERIO=y
# CONFIG_PARPORT_PC_PCMCIA is not set
# CONFIG_PARPORT_GSC is not set
CONFIG_PARPORT_AX88796=y
# CONFIG_PARPORT_1284 is not set
CONFIG_PARPORT_NOT_PC=y
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y

#
# Protocols
#
CONFIG_PNPACPI=y

#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=y
# CONFIG_AD525X_DPOT is not set
CONFIG_DUMMY_IRQ=y
CONFIG_IBM_ASM=y
CONFIG_PHANTOM=y
# CONFIG_INTEL_MID_PTI is not set
# CONFIG_SGI_IOC4 is not set
CONFIG_TIFM_CORE=y
CONFIG_TIFM_7XX1=y
CONFIG_ICS932S401=y
CONFIG_ATMEL_SSC=y
CONFIG_ENCLOSURE_SERVICES=y
CONFIG_CS5535_MFGPT=y
CONFIG_CS5535_MFGPT_DEFAULT_IRQ=7
# CONFIG_CS5535_CLOCK_EVENT_SRC is not set
CONFIG_HP_ILO=y
CONFIG_APDS9802ALS=y
CONFIG_ISL29003=y
CONFIG_ISL29020=y
CONFIG_SENSORS_TSL2550=y
CONFIG_SENSORS_BH1780=y
CONFIG_SENSORS_BH1770=y
# CONFIG_SENSORS_APDS990X is not set
CONFIG_HMC6352=y
# CONFIG_DS1682 is not set
CONFIG_TI_DAC7512=y
CONFIG_VMWARE_BALLOON=y
# CONFIG_BMP085_I2C is not set
# CONFIG_BMP085_SPI is not set
CONFIG_PCH_PHUB=y
CONFIG_USB_SWITCH_FSA9480=y
CONFIG_LATTICE_ECP3_CONFIG=y
# CONFIG_SRAM is not set
CONFIG_C2PORT=y
CONFIG_C2PORT_DURAMAR_2150=y

#
# EEPROM support
#
CONFIG_EEPROM_AT24=y
CONFIG_EEPROM_AT25=y
CONFIG_EEPROM_LEGACY=y
# CONFIG_EEPROM_MAX6875 is not set
CONFIG_EEPROM_93CX6=y
CONFIG_EEPROM_93XX46=y
CONFIG_CB710_CORE=y
# CONFIG_CB710_DEBUG is not set
CONFIG_CB710_DEBUG_ASSUMPTIONS=y

#
# Texas Instruments shared transport line discipline #
# CONFIG_TI_ST is not set CONFIG_SENSORS_LIS3_I2C=y

#
# Altera FPGA firmware download module
#
CONFIG_ALTERA_STAPL=y
CONFIG_VMWARE_VMCI=y
CONFIG_HAVE_IDE=y

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_SCSI_DMA is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
CONFIG_FIREWIRE_NOSY=y
CONFIG_I2O=y
CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
CONFIG_I2O_EXT_ADAPTEC=y
CONFIG_I2O_EXT_ADAPTEC_DMA64=y
CONFIG_I2O_CONFIG=y
# CONFIG_I2O_CONFIG_OLD_IOCTL is not set
# CONFIG_I2O_BUS is not set
CONFIG_I2O_PROC=y
# CONFIG_MACINTOSH_DRIVERS is not set
# CONFIG_NETDEVICES is not set
# CONFIG_VHOST_NET is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=y
CONFIG_INPUT_SPARSEKMAP=y
# CONFIG_INPUT_MATRIXKMAP is not set

#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
CONFIG_INPUT_JOYDEV=y
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5520 is not set
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_GPIO_POLLED is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_STMPE is not set
# CONFIG_KEYBOARD_TC3589X is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_CYPRESS=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_SENTELIC is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
CONFIG_MOUSE_BCM5974=y
CONFIG_MOUSE_CYAPA=y
CONFIG_MOUSE_VSXXXAA=y
# CONFIG_MOUSE_GPIO is not set
CONFIG_MOUSE_SYNAPTICS_I2C=y
CONFIG_MOUSE_SYNAPTICS_USB=y
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=y
# CONFIG_JOYSTICK_A3D is not set
CONFIG_JOYSTICK_ADI=y
# CONFIG_JOYSTICK_COBRA is not set
CONFIG_JOYSTICK_GF2K=y
# CONFIG_JOYSTICK_GRIP is not set
CONFIG_JOYSTICK_GRIP_MP=y
# CONFIG_JOYSTICK_GUILLEMOT is not set
CONFIG_JOYSTICK_INTERACT=y
CONFIG_JOYSTICK_SIDEWINDER=y
# CONFIG_JOYSTICK_TMDC is not set
CONFIG_JOYSTICK_IFORCE=y
CONFIG_JOYSTICK_IFORCE_USB=y
# CONFIG_JOYSTICK_IFORCE_232 is not set
# CONFIG_JOYSTICK_WARRIOR is not set
CONFIG_JOYSTICK_MAGELLAN=y
CONFIG_JOYSTICK_SPACEORB=y
CONFIG_JOYSTICK_SPACEBALL=y
CONFIG_JOYSTICK_STINGER=y
CONFIG_JOYSTICK_TWIDJOY=y
CONFIG_JOYSTICK_ZHENHUA=y
# CONFIG_JOYSTICK_DB9 is not set
# CONFIG_JOYSTICK_GAMECON is not set
CONFIG_JOYSTICK_TURBOGRAFX=y
CONFIG_JOYSTICK_AS5011=y
CONFIG_JOYSTICK_JOYDUMP=y
# CONFIG_JOYSTICK_XPAD is not set
CONFIG_JOYSTICK_WALKERA0701=y
# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=y
CONFIG_TOUCHSCREEN_AD7877=y
# CONFIG_TOUCHSCREEN_AD7879 is not set
CONFIG_TOUCHSCREEN_ATMEL_MXT=y
CONFIG_TOUCHSCREEN_AUO_PIXCIR=y
CONFIG_TOUCHSCREEN_BU21013=y
# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
CONFIG_TOUCHSCREEN_CYTTSP_CORE=y
# CONFIG_TOUCHSCREEN_CYTTSP_I2C is not set
# CONFIG_TOUCHSCREEN_CYTTSP_SPI is not set
# CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set
CONFIG_TOUCHSCREEN_DA9052=y
CONFIG_TOUCHSCREEN_DYNAPRO=y
CONFIG_TOUCHSCREEN_HAMPSHIRE=y
CONFIG_TOUCHSCREEN_EETI=y
# CONFIG_TOUCHSCREEN_FUJITSU is not set
CONFIG_TOUCHSCREEN_ILI210X=y
# CONFIG_TOUCHSCREEN_GUNZE is not set
CONFIG_TOUCHSCREEN_ELO=y
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
CONFIG_TOUCHSCREEN_WACOM_I2C=y
CONFIG_TOUCHSCREEN_MAX11801=y
CONFIG_TOUCHSCREEN_MCS5000=y
# CONFIG_TOUCHSCREEN_MMS114 is not set
CONFIG_TOUCHSCREEN_MTOUCH=y
CONFIG_TOUCHSCREEN_INEXIO=y
# CONFIG_TOUCHSCREEN_MK712 is not set
CONFIG_TOUCHSCREEN_PENMOUNT=y
CONFIG_TOUCHSCREEN_EDT_FT5X06=y
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
CONFIG_TOUCHSCREEN_TOUCHWIN=y
# CONFIG_TOUCHSCREEN_PIXCIR is not set
# CONFIG_TOUCHSCREEN_WM831X is not set
CONFIG_TOUCHSCREEN_USB_COMPOSITE=y
# CONFIG_TOUCHSCREEN_MC13783 is not set
# CONFIG_TOUCHSCREEN_USB_EGALAX is not set
# CONFIG_TOUCHSCREEN_USB_PANJIT is not set
# CONFIG_TOUCHSCREEN_USB_3M is not set
CONFIG_TOUCHSCREEN_USB_ITM=y
# CONFIG_TOUCHSCREEN_USB_ETURBO is not set
CONFIG_TOUCHSCREEN_USB_GUNZE=y
CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
# CONFIG_TOUCHSCREEN_USB_IRTOUCH is not set
CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
# CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH is not set
# CONFIG_TOUCHSCREEN_USB_GOTOP is not set
CONFIG_TOUCHSCREEN_USB_JASTEC=y
# CONFIG_TOUCHSCREEN_USB_ELO is not set
CONFIG_TOUCHSCREEN_USB_E2I=y
# CONFIG_TOUCHSCREEN_USB_ZYTRONIC is not set
# CONFIG_TOUCHSCREEN_USB_ETT_TC45USB is not set
# CONFIG_TOUCHSCREEN_USB_NEXIO is not set
CONFIG_TOUCHSCREEN_USB_EASYTOUCH=y
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TSC_SERIO is not set
CONFIG_TOUCHSCREEN_TSC2005=y
CONFIG_TOUCHSCREEN_TSC2007=y
CONFIG_TOUCHSCREEN_PCAP=y
# CONFIG_TOUCHSCREEN_ST1232 is not set
# CONFIG_TOUCHSCREEN_STMPE is not set
CONFIG_TOUCHSCREEN_TPS6507X=y
CONFIG_INPUT_MISC=y
CONFIG_INPUT_AD714X=y
CONFIG_INPUT_AD714X_I2C=y
# CONFIG_INPUT_AD714X_SPI is not set
CONFIG_INPUT_BMA150=y
CONFIG_INPUT_MC13783_PWRBUTTON=y
# CONFIG_INPUT_MMA8450 is not set
CONFIG_INPUT_MPU3050=y
CONFIG_INPUT_APANEL=y
CONFIG_INPUT_GP2A=y
# CONFIG_INPUT_GPIO_TILT_POLLED is not set
# CONFIG_INPUT_ATLAS_BTNS is not set
CONFIG_INPUT_ATI_REMOTE2=y
CONFIG_INPUT_KEYSPAN_REMOTE=y
CONFIG_INPUT_KXTJ9=y
CONFIG_INPUT_KXTJ9_POLLED_MODE=y
# CONFIG_INPUT_POWERMATE is not set
CONFIG_INPUT_YEALINK=y
CONFIG_INPUT_CM109=y
CONFIG_INPUT_RETU_PWRBUTTON=y
CONFIG_INPUT_TWL6040_VIBRA=y
CONFIG_INPUT_UINPUT=y
# CONFIG_INPUT_PCF50633_PMU is not set
# CONFIG_INPUT_PCF8574 is not set
CONFIG_INPUT_PWM_BEEPER=y
CONFIG_INPUT_GPIO_ROTARY_ENCODER=y
# CONFIG_INPUT_DA9052_ONKEY is not set
CONFIG_INPUT_WM831X_ON=y
CONFIG_INPUT_PCAP=y
CONFIG_INPUT_ADXL34X=y
CONFIG_INPUT_ADXL34X_I2C=y
# CONFIG_INPUT_ADXL34X_SPI is not set
# CONFIG_INPUT_IMS_PCU is not set
CONFIG_INPUT_CMA3000=y
# CONFIG_INPUT_CMA3000_I2C is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_CT82C710=y
CONFIG_SERIO_PARKBD=y
CONFIG_SERIO_PCIPS2=y
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
CONFIG_SERIO_ALTERA_PS2=y
CONFIG_SERIO_PS2MULT=y
CONFIG_SERIO_ARC_PS2=y
CONFIG_GAMEPORT=y
CONFIG_GAMEPORT_NS558=y
CONFIG_GAMEPORT_L4=y
CONFIG_GAMEPORT_EMU10K1=y
# CONFIG_GAMEPORT_FM801 is not set

#
# Character devices
#
CONFIG_TTY=y
# CONFIG_VT is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
# CONFIG_N_GSM is not set
# CONFIG_TRACE_SINK is not set
# CONFIG_DEVKMEM is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
# CONFIG_SERIAL_8250_CS is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
# CONFIG_SERIAL_8250_DW is not set

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_MAX310X is not set
# CONFIG_SERIAL_MRST_MAX3110 is not set
# CONFIG_SERIAL_MFD_HSU is not set
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_IFX6X60 is not set
# CONFIG_SERIAL_PCH_UART is not set
# CONFIG_SERIAL_ARC is not set
# CONFIG_SERIAL_RP2 is not set
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_TTY_PRINTK is not set
# CONFIG_PRINTER is not set
# CONFIG_PPDEV is not set
# CONFIG_VIRTIO_CONSOLE is not set
CONFIG_IPMI_HANDLER=y
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=y
CONFIG_IPMI_SI=y
CONFIG_IPMI_WATCHDOG=y
CONFIG_IPMI_POWEROFF=y
# CONFIG_HW_RANDOM is not set
CONFIG_NVRAM=y
# CONFIG_R3964 is not set
CONFIG_APPLICOM=y

#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
CONFIG_CARDMAN_4000=y
# CONFIG_CARDMAN_4040 is not set
# CONFIG_MWAVE is not set
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
CONFIG_TCG_TPM=y
# CONFIG_TCG_TIS is not set
CONFIG_TCG_TIS_I2C_INFINEON=y
CONFIG_TCG_NSC=y
# CONFIG_TCG_ATMEL is not set
# CONFIG_TCG_INFINEON is not set
# CONFIG_TCG_ST33_I2C is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_COMPAT is not set
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MUX=y

#
# Multiplexer I2C Chip support
#
CONFIG_I2C_MUX_GPIO=y
# CONFIG_I2C_MUX_PCA9541 is not set
CONFIG_I2C_MUX_PCA954x=y
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=y
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCA=y

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
CONFIG_I2C_ALI1563=y
CONFIG_I2C_ALI15X3=y
# CONFIG_I2C_AMD756 is not set
CONFIG_I2C_AMD8111=y
CONFIG_I2C_I801=y
# CONFIG_I2C_ISCH is not set
CONFIG_I2C_ISMT=y
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
CONFIG_I2C_SIS5595=y
CONFIG_I2C_SIS630=y
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set

#
# ACPI drivers
#
# CONFIG_I2C_SCMI is not set

#
# I2C system bus drivers (mostly embedded / system-on-chip) #
CONFIG_I2C_CBUS_GPIO=y
# CONFIG_I2C_DESIGNWARE_PCI is not set CONFIG_I2C_EG20T=y
# CONFIG_I2C_GPIO is not set
CONFIG_I2C_KEMPLD=y
CONFIG_I2C_OCORES=y
CONFIG_I2C_PCA_PLATFORM=y
# CONFIG_I2C_PXA_PCI is not set CONFIG_I2C_SIMTEC=y
CONFIG_I2C_XILINX=y

#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_DIOLAN_U2C=y
CONFIG_I2C_PARPORT=y
CONFIG_I2C_PARPORT_LIGHT=y
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
# CONFIG_I2C_VIPERBOARD is not set

#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_SPI=y
CONFIG_SPI_DEBUG=y
CONFIG_SPI_MASTER=y

#
# SPI Master Controller Drivers
#
CONFIG_SPI_ALTERA=y
CONFIG_SPI_BITBANG=y
CONFIG_SPI_BUTTERFLY=y
# CONFIG_SPI_GPIO is not set
CONFIG_SPI_LM70_LLP=y
CONFIG_SPI_OC_TINY=y
CONFIG_SPI_PXA2XX_DMA=y
CONFIG_SPI_PXA2XX=y
CONFIG_SPI_PXA2XX_PCI=y
CONFIG_SPI_SC18IS602=y
CONFIG_SPI_TOPCLIFF_PCH=y
CONFIG_SPI_XCOMM=y
CONFIG_SPI_XILINX=y
CONFIG_SPI_DESIGNWARE=y
CONFIG_SPI_DW_PCI=y

#
# SPI Protocol Masters
#
CONFIG_SPI_SPIDEV=y
CONFIG_SPI_TLE62X0=y
# CONFIG_HSI is not set

#
# PPS support
#
CONFIG_PPS=y
# CONFIG_PPS_DEBUG is not set

#
# PPS clients support
#
CONFIG_PPS_CLIENT_KTIMER=y
# CONFIG_PPS_CLIENT_LDISC is not set
CONFIG_PPS_CLIENT_PARPORT=y
CONFIG_PPS_CLIENT_GPIO=y

#
# PPS generators support
#

#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=y

#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks. #
CONFIG_PTP_1588_CLOCK_PCH=y CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIO_DEVRES=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_ACPI=y
# CONFIG_DEBUG_GPIO is not set
# CONFIG_GPIO_SYSFS is not set
CONFIG_GPIO_GENERIC=y
# CONFIG_GPIO_DA9052 is not set
CONFIG_GPIO_MAX730X=y

#
# Memory mapped GPIO drivers:
#
CONFIG_GPIO_GENERIC_PLATFORM=y
# CONFIG_GPIO_IT8761E is not set
CONFIG_GPIO_TS5500=y
CONFIG_GPIO_SCH=y
CONFIG_GPIO_ICH=y
CONFIG_GPIO_VX855=y
# CONFIG_GPIO_LYNXPOINT is not set

#
# I2C GPIO expanders:
#
CONFIG_GPIO_ARIZONA=y
# CONFIG_GPIO_MAX7300 is not set
CONFIG_GPIO_MAX732X=y
# CONFIG_GPIO_MAX732X_IRQ is not set
CONFIG_GPIO_PCA953X=y
CONFIG_GPIO_PCA953X_IRQ=y
CONFIG_GPIO_PCF857X=y
CONFIG_GPIO_RC5T583=y
# CONFIG_GPIO_SX150X is not set
CONFIG_GPIO_STMPE=y
CONFIG_GPIO_TC3589X=y
CONFIG_GPIO_TPS65912=y
CONFIG_GPIO_TWL6040=y
CONFIG_GPIO_WM831X=y
CONFIG_GPIO_WM8350=y
CONFIG_GPIO_WM8994=y
CONFIG_GPIO_ADP5520=y
# CONFIG_GPIO_ADP5588 is not set

#
# PCI GPIO expanders:
#
CONFIG_GPIO_CS5535=y
CONFIG_GPIO_BT8XX=y
CONFIG_GPIO_AMD8111=y
CONFIG_GPIO_LANGWELL=y
# CONFIG_GPIO_PCH is not set
CONFIG_GPIO_ML_IOH=y
CONFIG_GPIO_TIMBERDALE=y
CONFIG_GPIO_RDC321X=y

#
# SPI GPIO expanders:
#
CONFIG_GPIO_MAX7301=y
CONFIG_GPIO_MCP23S08=y
CONFIG_GPIO_MC33880=y
# CONFIG_GPIO_74X164 is not set

#
# AC97 GPIO expanders:
#

#
# MODULbus GPIO expanders:
#
CONFIG_GPIO_JANZ_TTL=y
# CONFIG_GPIO_TPS6586X is not set
CONFIG_GPIO_TPS65910=y

#
# USB GPIO expanders:
#
CONFIG_GPIO_VIPERBOARD=y
CONFIG_W1=y
# CONFIG_W1_CON is not set

#
# 1-wire Bus Masters
#
# CONFIG_W1_MASTER_MATROX is not set
CONFIG_W1_MASTER_DS2490=y
CONFIG_W1_MASTER_DS2482=y
CONFIG_W1_MASTER_DS1WM=y
CONFIG_W1_MASTER_GPIO=y

#
# 1-wire Slaves
#
# CONFIG_W1_SLAVE_THERM is not set
CONFIG_W1_SLAVE_SMEM=y
# CONFIG_W1_SLAVE_DS2408 is not set
CONFIG_W1_SLAVE_DS2413=y
CONFIG_W1_SLAVE_DS2423=y
CONFIG_W1_SLAVE_DS2431=y
CONFIG_W1_SLAVE_DS2433=y
# CONFIG_W1_SLAVE_DS2433_CRC is not set
# CONFIG_W1_SLAVE_DS2760 is not set
CONFIG_W1_SLAVE_DS2780=y
CONFIG_W1_SLAVE_DS2781=y
CONFIG_W1_SLAVE_DS28E04=y
CONFIG_W1_SLAVE_BQ27000=y
CONFIG_POWER_SUPPLY=y
CONFIG_POWER_SUPPLY_DEBUG=y
# CONFIG_PDA_POWER is not set
CONFIG_GENERIC_ADC_BATTERY=y
CONFIG_WM831X_BACKUP=y
CONFIG_WM831X_POWER=y
CONFIG_WM8350_POWER=y
CONFIG_TEST_POWER=y
CONFIG_BATTERY_DS2780=y
CONFIG_BATTERY_DS2781=y
CONFIG_BATTERY_DS2782=y
CONFIG_BATTERY_SBS=y
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_BATTERY_DA9052 is not set
# CONFIG_BATTERY_MAX17040 is not set
CONFIG_BATTERY_MAX17042=y
CONFIG_CHARGER_PCF50633=y
# CONFIG_CHARGER_ISP1704 is not set
CONFIG_CHARGER_MAX8903=y
# CONFIG_CHARGER_LP8727 is not set
CONFIG_CHARGER_GPIO=y
# CONFIG_CHARGER_MANAGER is not set
CONFIG_CHARGER_MAX8997=y
CONFIG_CHARGER_MAX8998=y
CONFIG_CHARGER_BQ2415X=y
CONFIG_CHARGER_SMB347=y
CONFIG_BATTERY_GOLDFISH=y
# CONFIG_POWER_RESET is not set
# CONFIG_POWER_AVS is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
CONFIG_HWMON_DEBUG_CHIP=y

#
# Native drivers
#
CONFIG_SENSORS_AD7314=y
CONFIG_SENSORS_AD7414=y
# CONFIG_SENSORS_AD7418 is not set
CONFIG_SENSORS_ADCXX=y
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
CONFIG_SENSORS_ADM1026=y
CONFIG_SENSORS_ADM1029=y
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
CONFIG_SENSORS_ADT7X10=y
CONFIG_SENSORS_ADT7310=y
# CONFIG_SENSORS_ADT7410 is not set
CONFIG_SENSORS_ADT7411=y
CONFIG_SENSORS_ADT7462=y
CONFIG_SENSORS_ADT7470=y
# CONFIG_SENSORS_ADT7475 is not set
CONFIG_SENSORS_ASC7621=y
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_K10TEMP is not set
CONFIG_SENSORS_FAM15H_POWER=y
CONFIG_SENSORS_ASB100=y
CONFIG_SENSORS_ATXP1=y
CONFIG_SENSORS_DS620=y
CONFIG_SENSORS_DS1621=y
CONFIG_SENSORS_DA9052_ADC=y
# CONFIG_SENSORS_I5K_AMB is not set
CONFIG_SENSORS_F71805F=y
CONFIG_SENSORS_F71882FG=y
# CONFIG_SENSORS_F75375S is not set
CONFIG_SENSORS_FSCHMD=y
CONFIG_SENSORS_G760A=y
# CONFIG_SENSORS_G762 is not set
# CONFIG_SENSORS_GL518SM is not set
CONFIG_SENSORS_GL520SM=y
CONFIG_SENSORS_GPIO_FAN=y
CONFIG_SENSORS_HIH6130=y
# CONFIG_SENSORS_CORETEMP is not set
CONFIG_SENSORS_IBMAEM=y
# CONFIG_SENSORS_IBMPEX is not set
# CONFIG_SENSORS_IIO_HWMON is not set
CONFIG_SENSORS_IT87=y
CONFIG_SENSORS_JC42=y
CONFIG_SENSORS_LINEAGE=y
CONFIG_SENSORS_LM63=y
# CONFIG_SENSORS_LM70 is not set
CONFIG_SENSORS_LM73=y
# CONFIG_SENSORS_LM75 is not set
CONFIG_SENSORS_LM77=y
# CONFIG_SENSORS_LM78 is not set
CONFIG_SENSORS_LM80=y
CONFIG_SENSORS_LM83=y
# CONFIG_SENSORS_LM85 is not set
CONFIG_SENSORS_LM87=y
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
CONFIG_SENSORS_LM93=y
CONFIG_SENSORS_LTC4151=y
CONFIG_SENSORS_LTC4215=y
CONFIG_SENSORS_LTC4245=y
CONFIG_SENSORS_LTC4261=y
CONFIG_SENSORS_LM95234=y
CONFIG_SENSORS_LM95241=y
# CONFIG_SENSORS_LM95245 is not set
CONFIG_SENSORS_MAX1111=y
CONFIG_SENSORS_MAX16065=y
CONFIG_SENSORS_MAX1619=y
CONFIG_SENSORS_MAX1668=y
CONFIG_SENSORS_MAX197=y
# CONFIG_SENSORS_MAX6639 is not set
CONFIG_SENSORS_MAX6642=y
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_MAX6697 is not set
CONFIG_SENSORS_MCP3021=y
CONFIG_SENSORS_NCT6775=y
CONFIG_SENSORS_PC87360=y
CONFIG_SENSORS_PC87427=y
# CONFIG_SENSORS_PCF8591 is not set
CONFIG_PMBUS=y
# CONFIG_SENSORS_PMBUS is not set
CONFIG_SENSORS_ADM1275=y
# CONFIG_SENSORS_LM25066 is not set
CONFIG_SENSORS_LTC2978=y
CONFIG_SENSORS_MAX16064=y
# CONFIG_SENSORS_MAX34440 is not set
# CONFIG_SENSORS_MAX8688 is not set
CONFIG_SENSORS_UCD9000=y
CONFIG_SENSORS_UCD9200=y
CONFIG_SENSORS_ZL6100=y
CONFIG_SENSORS_SHT15=y
CONFIG_SENSORS_SHT21=y
CONFIG_SENSORS_SIS5595=y
# CONFIG_SENSORS_SMM665 is not set
# CONFIG_SENSORS_DME1737 is not set
CONFIG_SENSORS_EMC1403=y
CONFIG_SENSORS_EMC2103=y
CONFIG_SENSORS_EMC6W201=y
CONFIG_SENSORS_SMSC47M1=y
# CONFIG_SENSORS_SMSC47M192 is not set
CONFIG_SENSORS_SMSC47B397=y
# CONFIG_SENSORS_SCH56XX_COMMON is not set
CONFIG_SENSORS_ADS1015=y
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_ADS7871 is not set
CONFIG_SENSORS_AMC6821=y
CONFIG_SENSORS_INA209=y
# CONFIG_SENSORS_INA2XX is not set
CONFIG_SENSORS_THMC50=y
# CONFIG_SENSORS_TMP102 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
CONFIG_SENSORS_VIA_CPUTEMP=y
# CONFIG_SENSORS_VIA686A is not set
CONFIG_SENSORS_VT1211=y
CONFIG_SENSORS_VT8231=y
CONFIG_SENSORS_W83781D=y
CONFIG_SENSORS_W83791D=y
# CONFIG_SENSORS_W83792D is not set
CONFIG_SENSORS_W83793=y
CONFIG_SENSORS_W83795=y
# CONFIG_SENSORS_W83795_FANCTRL is not set
# CONFIG_SENSORS_W83L785TS is not set
CONFIG_SENSORS_W83L786NG=y
CONFIG_SENSORS_W83627HF=y
CONFIG_SENSORS_W83627EHF=y
CONFIG_SENSORS_WM831X=y
CONFIG_SENSORS_WM8350=y
CONFIG_SENSORS_APPLESMC=y
CONFIG_SENSORS_MC13783_ADC=y

#
# ACPI drivers
#
# CONFIG_SENSORS_ACPI_POWER is not set
# CONFIG_SENSORS_ATK0110 is not set CONFIG_THERMAL=y
CONFIG_THERMAL_HWMON=y CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set # CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set # CONFIG_THERMAL_GOV_FAIR_SHARE is not set CONFIG_THERMAL_GOV_STEP_WISE=y
# CONFIG_THERMAL_GOV_USER_SPACE is not set # CONFIG_CPU_THERMAL is not set
# CONFIG_THERMAL_EMULATION is not set
# CONFIG_INTEL_POWERCLAMP is not set

#
# Texas Instruments thermal drivers
#
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
CONFIG_SSB=y
CONFIG_SSB_SPROM=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
# CONFIG_SSB_B43_PCI_BRIDGE is not set
CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
# CONFIG_SSB_PCMCIAHOST is not set
CONFIG_SSB_SDIOHOST_POSSIBLE=y
CONFIG_SSB_SDIOHOST=y
CONFIG_SSB_SILENT=y
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
CONFIG_SSB_DRIVER_GPIO=y
CONFIG_BCMA_POSSIBLE=y

#
# Broadcom specific AMBA
#
CONFIG_BCMA=y
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
# CONFIG_BCMA_HOST_PCI is not set
CONFIG_BCMA_DRIVER_GMAC_CMN=y
# CONFIG_BCMA_DRIVER_GPIO is not set
# CONFIG_BCMA_DEBUG is not set

#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
CONFIG_MFD_CS5535=y
# CONFIG_MFD_AS3711 is not set
CONFIG_PMIC_ADP5520=y
CONFIG_MFD_AAT2870_CORE=y
# CONFIG_MFD_CROS_EC is not set
# CONFIG_PMIC_DA903X is not set
CONFIG_PMIC_DA9052=y
# CONFIG_MFD_DA9052_SPI is not set
CONFIG_MFD_DA9052_I2C=y
# CONFIG_MFD_DA9055 is not set
CONFIG_MFD_MC13783=y
CONFIG_MFD_MC13XXX=y
CONFIG_MFD_MC13XXX_SPI=y
CONFIG_MFD_MC13XXX_I2C=y
# CONFIG_HTC_PASIC3 is not set
# CONFIG_HTC_I2CPLD is not set
CONFIG_LPC_ICH=y
CONFIG_LPC_SCH=y
CONFIG_MFD_JANZ_CMODIO=y
CONFIG_MFD_KEMPLD=y
# CONFIG_MFD_88PM800 is not set
CONFIG_MFD_88PM805=y
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_MAX77686 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX8907 is not set
# CONFIG_MFD_MAX8925 is not set
CONFIG_MFD_MAX8997=y
CONFIG_MFD_MAX8998=y
CONFIG_EZX_PCAP=y
CONFIG_MFD_VIPERBOARD=y
CONFIG_MFD_RETU=y
CONFIG_MFD_PCF50633=y
CONFIG_PCF50633_ADC=y
CONFIG_PCF50633_GPIO=y
CONFIG_MFD_RDC321X=y
# CONFIG_MFD_RTSX_PCI is not set
CONFIG_MFD_RC5T583=y
CONFIG_MFD_SEC_CORE=y
# CONFIG_MFD_SI476X_CORE is not set
# CONFIG_MFD_SM501 is not set
CONFIG_MFD_SMSC=y
# CONFIG_ABX500_CORE is not set
CONFIG_MFD_STMPE=y

#
# STMicroelectronics STMPE Interface Drivers
#
# CONFIG_STMPE_I2C is not set
# CONFIG_STMPE_SPI is not set
CONFIG_MFD_SYSCON=y
# CONFIG_MFD_TI_AM335X_TSCADC is not set
CONFIG_MFD_LP8788=y
# CONFIG_MFD_PALMAS is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS65010 is not set
CONFIG_TPS6507X=y
# CONFIG_MFD_TPS65090 is not set
# CONFIG_MFD_TPS65217 is not set
CONFIG_MFD_TPS6586X=y
CONFIG_MFD_TPS65910=y
CONFIG_MFD_TPS65912=y
CONFIG_MFD_TPS65912_I2C=y
# CONFIG_MFD_TPS65912_SPI is not set
# CONFIG_MFD_TPS80031 is not set
# CONFIG_TWL4030_CORE is not set
CONFIG_TWL6040_CORE=y
CONFIG_MFD_WL1273_CORE=y
CONFIG_MFD_LM3533=y
CONFIG_MFD_TIMBERDALE=y
CONFIG_MFD_TC3589X=y
# CONFIG_MFD_TMIO is not set
CONFIG_MFD_VX855=y
CONFIG_MFD_ARIZONA=y
# CONFIG_MFD_ARIZONA_I2C is not set
CONFIG_MFD_ARIZONA_SPI=y
CONFIG_MFD_WM5102=y
CONFIG_MFD_WM5110=y
# CONFIG_MFD_WM8997 is not set
# CONFIG_MFD_WM8400 is not set
CONFIG_MFD_WM831X=y
CONFIG_MFD_WM831X_I2C=y
CONFIG_MFD_WM831X_SPI=y
CONFIG_MFD_WM8350=y
CONFIG_MFD_WM8350_I2C=y
CONFIG_MFD_WM8994=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_DEBUG=y
CONFIG_REGULATOR_DUMMY=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
CONFIG_REGULATOR_GPIO=y
# CONFIG_REGULATOR_AD5398 is not set
# CONFIG_REGULATOR_AAT2870 is not set
CONFIG_REGULATOR_DA9052=y
# CONFIG_REGULATOR_FAN53555 is not set
# CONFIG_REGULATOR_ANATOP is not set
CONFIG_REGULATOR_MC13XXX_CORE=y
# CONFIG_REGULATOR_MC13783 is not set
CONFIG_REGULATOR_MC13892=y
CONFIG_REGULATOR_ISL6271A=y
# CONFIG_REGULATOR_MAX1586 is not set
CONFIG_REGULATOR_MAX8649=y
CONFIG_REGULATOR_MAX8660=y
# CONFIG_REGULATOR_MAX8952 is not set
# CONFIG_REGULATOR_MAX8973 is not set
CONFIG_REGULATOR_MAX8997=y
CONFIG_REGULATOR_MAX8998=y
CONFIG_REGULATOR_PCAP=y
CONFIG_REGULATOR_LP3971=y
# CONFIG_REGULATOR_LP3972 is not set
CONFIG_REGULATOR_LP872X=y
CONFIG_REGULATOR_LP8755=y
CONFIG_REGULATOR_LP8788=y
CONFIG_REGULATOR_PCF50633=y
# CONFIG_REGULATOR_RC5T583 is not set
# CONFIG_REGULATOR_S2MPS11 is not set
CONFIG_REGULATOR_S5M8767=y
CONFIG_REGULATOR_TPS51632=y
CONFIG_REGULATOR_TPS62360=y
CONFIG_REGULATOR_TPS65023=y
CONFIG_REGULATOR_TPS6507X=y
CONFIG_REGULATOR_TPS6524X=y
CONFIG_REGULATOR_TPS6586X=y
CONFIG_REGULATOR_TPS65910=y
CONFIG_REGULATOR_TPS65912=y
# CONFIG_REGULATOR_WM831X is not set
CONFIG_REGULATOR_WM8350=y
CONFIG_REGULATOR_WM8994=y
# CONFIG_MEDIA_SUPPORT is not set

#
# Graphics support
#
CONFIG_AGP=y
# CONFIG_AGP_AMD64 is not set
CONFIG_AGP_INTEL=y
CONFIG_AGP_SIS=y
CONFIG_AGP_VIA=y
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_VGA_SWITCHEROO is not set
CONFIG_DRM=y
CONFIG_DRM_USB=y
CONFIG_DRM_KMS_HELPER=y
# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set
CONFIG_DRM_TTM=y

#
# I2C encoder or helper chips
#
# CONFIG_DRM_I2C_CH7006 is not set
# CONFIG_DRM_I2C_SIL164 is not set
# CONFIG_DRM_I2C_NXP_TDA998X is not set
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=y
# CONFIG_DRM_RADEON_UMS is not set
# CONFIG_DRM_NOUVEAU is not set
# CONFIG_DRM_I915 is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_DRM_VMWGFX is not set
# CONFIG_DRM_GMA500 is not set
CONFIG_DRM_UDL=y
CONFIG_DRM_AST=y
CONFIG_DRM_MGAG200=y
CONFIG_DRM_CIRRUS_QEMU=y
CONFIG_DRM_QXL=y
CONFIG_VGASTATE=y
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_HDMI=y
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_DDC=y
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
CONFIG_FB_FOREIGN_ENDIAN=y
CONFIG_FB_BOTH_ENDIAN=y
# CONFIG_FB_BIG_ENDIAN is not set
# CONFIG_FB_LITTLE_ENDIAN is not set
CONFIG_FB_SYS_FOPS=y
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_HECUBA=y
CONFIG_FB_SVGALIB=y
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
CONFIG_FB_PM2=y
# CONFIG_FB_PM2_FIFO_DISCONNECT is not set
CONFIG_FB_CYBER2000=y
# CONFIG_FB_CYBER2000_DDC is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
CONFIG_FB_UVESA=y
# CONFIG_FB_VESA is not set
CONFIG_FB_N411=y
CONFIG_FB_HGA=y
CONFIG_FB_S1D13XXX=y
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
CONFIG_FB_I740=y
CONFIG_FB_LE80578=y
CONFIG_FB_CARILLO_RANCH=y
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
CONFIG_FB_RADEON=y
CONFIG_FB_RADEON_I2C=y
# CONFIG_FB_RADEON_BACKLIGHT is not set
# CONFIG_FB_RADEON_DEBUG is not set
CONFIG_FB_ATY128=y
CONFIG_FB_ATY128_BACKLIGHT=y
CONFIG_FB_ATY=y
CONFIG_FB_ATY_CT=y
# CONFIG_FB_ATY_GENERIC_LCD is not set
CONFIG_FB_ATY_GX=y
CONFIG_FB_ATY_BACKLIGHT=y
CONFIG_FB_S3=y
# CONFIG_FB_S3_DDC is not set
# CONFIG_FB_SAVAGE is not set
CONFIG_FB_SIS=y
# CONFIG_FB_SIS_300 is not set
# CONFIG_FB_SIS_315 is not set
CONFIG_FB_VIA=y
CONFIG_FB_VIA_DIRECT_PROCFS=y
# CONFIG_FB_VIA_X_COMPATIBILITY is not set
CONFIG_FB_NEOMAGIC=y
CONFIG_FB_KYRO=y
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
CONFIG_FB_VT8623=y
CONFIG_FB_TRIDENT=y
# CONFIG_FB_ARK is not set
CONFIG_FB_PM3=y
CONFIG_FB_CARMINE=y
CONFIG_FB_CARMINE_DRAM_EVAL=y
# CONFIG_CARMINE_DRAM_CUSTOM is not set
# CONFIG_FB_GEODE is not set
CONFIG_FB_TMIO=y
# CONFIG_FB_TMIO_ACCELL is not set
CONFIG_FB_SMSCUFX=y
CONFIG_FB_UDL=y
CONFIG_FB_GOLDFISH=y
# CONFIG_FB_VIRTUAL is not set
CONFIG_FB_METRONOME=y
CONFIG_FB_MB862XX=y
CONFIG_FB_MB862XX_PCI_GDC=y
# CONFIG_FB_MB862XX_I2C is not set
# CONFIG_FB_BROADSHEET is not set
# CONFIG_FB_AUO_K190X is not set
# CONFIG_EXYNOS_VIDEO is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
# CONFIG_LCD_L4F00242T03 is not set
CONFIG_LCD_LMS283GF05=y
CONFIG_LCD_LTV350QV=y
# CONFIG_LCD_ILI922X is not set
# CONFIG_LCD_ILI9320 is not set
CONFIG_LCD_TDO24M=y
# CONFIG_LCD_VGG2432A4 is not set
CONFIG_LCD_PLATFORM=y
# CONFIG_LCD_S6E63M0 is not set
CONFIG_LCD_LD9040=y
# CONFIG_LCD_AMS369FG06 is not set
CONFIG_LCD_LMS501KF03=y
CONFIG_LCD_HX8357=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=y
# CONFIG_BACKLIGHT_LM3533 is not set
CONFIG_BACKLIGHT_CARILLO_RANCH=y
CONFIG_BACKLIGHT_PWM=y
# CONFIG_BACKLIGHT_DA9052 is not set
# CONFIG_BACKLIGHT_APPLE is not set
CONFIG_BACKLIGHT_SAHARA=y
CONFIG_BACKLIGHT_WM831X=y
CONFIG_BACKLIGHT_ADP5520=y
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
CONFIG_BACKLIGHT_PCF50633=y
CONFIG_BACKLIGHT_AAT2870=y
CONFIG_BACKLIGHT_LM3630=y
CONFIG_BACKLIGHT_LM3639=y
CONFIG_BACKLIGHT_LP855X=y
# CONFIG_BACKLIGHT_LP8788 is not set
# CONFIG_BACKLIGHT_OT200 is not set
# CONFIG_LOGO is not set
# CONFIG_SOUND is not set

#
# HID support
#
CONFIG_HID=y
CONFIG_HID_BATTERY_STRENGTH=y
# CONFIG_HIDRAW is not set
# CONFIG_UHID is not set
# CONFIG_HID_GENERIC is not set

#
# Special HID drivers
#
CONFIG_HID_A4TECH=y
CONFIG_HID_ACRUX=y
# CONFIG_HID_ACRUX_FF is not set
# CONFIG_HID_APPLE is not set
CONFIG_HID_APPLEIR=y
# CONFIG_HID_AUREAL is not set
CONFIG_HID_BELKIN=y
# CONFIG_HID_CHERRY is not set
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
# CONFIG_HID_DRAGONRISE is not set
CONFIG_HID_EMS_FF=y
# CONFIG_HID_ELECOM is not set
CONFIG_HID_ELO=y
CONFIG_HID_EZKEY=y
# CONFIG_HID_HOLTEK is not set
CONFIG_HID_HUION=y
# CONFIG_HID_KEYTOUCH is not set
CONFIG_HID_KYE=y
# CONFIG_HID_UCLOGIC is not set
CONFIG_HID_WALTOP=y
# CONFIG_HID_GYRATION is not set
CONFIG_HID_ICADE=y
# CONFIG_HID_TWINHAN is not set
CONFIG_HID_KENSINGTON=y
CONFIG_HID_LCPOWER=y
CONFIG_HID_LENOVO_TPKBD=y
CONFIG_HID_LOGITECH=y
CONFIG_HID_LOGITECH_DJ=y
CONFIG_LOGITECH_FF=y
# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_LOGIG940_FF=y
CONFIG_LOGIWHEELS_FF=y
CONFIG_HID_MAGICMOUSE=y
# CONFIG_HID_MICROSOFT is not set
# CONFIG_HID_MONTEREY is not set
CONFIG_HID_MULTITOUCH=y
CONFIG_HID_NTRIG=y
CONFIG_HID_ORTEK=y
CONFIG_HID_PANTHERLORD=y
# CONFIG_PANTHERLORD_FF is not set
# CONFIG_HID_PETALYNX is not set
CONFIG_HID_PICOLCD=y
# CONFIG_HID_PICOLCD_FB is not set
# CONFIG_HID_PICOLCD_BACKLIGHT is not set
# CONFIG_HID_PICOLCD_LCD is not set
# CONFIG_HID_PICOLCD_LEDS is not set
# CONFIG_HID_PRIMAX is not set
CONFIG_HID_ROCCAT=y
CONFIG_HID_SAITEK=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SPEEDLINK=y
CONFIG_HID_STEELSERIES=y
CONFIG_HID_SUNPLUS=y
CONFIG_HID_GREENASIA=y
CONFIG_GREENASIA_FF=y
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TIVO is not set
# CONFIG_HID_TOPSEED is not set
CONFIG_HID_THINGM=y
# CONFIG_HID_THRUSTMASTER is not set
# CONFIG_HID_WACOM is not set
CONFIG_HID_WIIMOTE=y
CONFIG_HID_ZEROPLUS=y
# CONFIG_ZEROPLUS_FF is not set
CONFIG_HID_ZYDACRON=y
CONFIG_HID_SENSOR_HUB=y

#
# USB HID support
#
CONFIG_USB_HID=y
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y

#
# I2C HID support
#
# CONFIG_I2C_HID is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y

#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
CONFIG_USB_OTG_BLACKLIST_HUB=y
# CONFIG_USB_MON is not set
CONFIG_USB_WUSB=y
# CONFIG_USB_WUSB_CBAF is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_PLATFORM=y
# CONFIG_USB_XHCI_HCD_DEBUGGING is not set
# CONFIG_USB_EHCI_HCD is not set
CONFIG_USB_OXU210HP_HCD=y
CONFIG_USB_ISP116X_HCD=y
CONFIG_USB_ISP1760_HCD=y
# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_FUSBH200_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PCI=y
# CONFIG_USB_OHCI_HCD_SSB is not set
CONFIG_USB_OHCI_HCD_PLATFORM=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
CONFIG_USB_U132_HCD=y
CONFIG_USB_SL811_HCD=y
# CONFIG_USB_SL811_HCD_ISO is not set
CONFIG_USB_SL811_CS=y
# CONFIG_USB_R8A66597_HCD is not set
CONFIG_USB_WHCI_HCD=y
CONFIG_USB_HWA_HCD=y
CONFIG_USB_HCD_BCMA=y
CONFIG_USB_HCD_SSB=y

#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
CONFIG_USB_WDM=y
CONFIG_USB_TMC=y

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may #

#

# also be needed; see USB_STORAGE Help for more info
#

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
CONFIG_USB_DWC3=y
CONFIG_USB_DWC3_HOST=y
CONFIG_USB_DWC3_DEBUG=y
CONFIG_USB_DWC3_VERBOSE=y
# CONFIG_USB_CHIPIDEA is not set

#
# USB port drivers
#
CONFIG_USB_USS720=y
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=y
CONFIG_USB_EMI26=y
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
CONFIG_USB_RIO500=y
CONFIG_USB_LEGOTOWER=y
CONFIG_USB_LCD=y
CONFIG_USB_LED=y
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
CONFIG_USB_IDMOUSE=y
CONFIG_USB_FTDI_ELAN=y
CONFIG_USB_APPLEDISPLAY=y
CONFIG_USB_LD=y
CONFIG_USB_TRANCEVIBRATOR=y
# CONFIG_USB_IOWARRIOR is not set
CONFIG_USB_TEST=y
# CONFIG_USB_ISIGHTFW is not set
CONFIG_USB_YUREX=y
# CONFIG_USB_EZUSB_FX2 is not set
CONFIG_USB_HSIC_USB3503=y
CONFIG_USB_PHY=y
CONFIG_NOP_USB_XCEIV=y
CONFIG_OMAP_CONTROL_USB=y
CONFIG_OMAP_USB3=y
CONFIG_SAMSUNG_USBPHY=y
# CONFIG_SAMSUNG_USB2PHY is not set
CONFIG_SAMSUNG_USB3PHY=y
CONFIG_USB_GPIO_VBUS=y
# CONFIG_USB_ISP1301 is not set
CONFIG_USB_RCAR_PHY=y
# CONFIG_USB_GADGET is not set
CONFIG_UWB=y
CONFIG_UWB_HWA=y
CONFIG_UWB_WHCI=y
# CONFIG_UWB_I1480U is not set
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
CONFIG_MMC_CLKGATE=y

#
# MMC/SD/SDIO Card Drivers
#
# CONFIG_SDIO_UART is not set
CONFIG_MMC_TEST=y

#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PCI=y
CONFIG_MMC_RICOH_MMC=y
# CONFIG_MMC_SDHCI_ACPI is not set
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_TIFM_SD=y
CONFIG_MMC_SPI=y
CONFIG_MMC_SDRICOH_CS=y
CONFIG_MMC_CB710=y
# CONFIG_MMC_VIA_SDMMC is not set
CONFIG_MMC_VUB300=y
CONFIG_MMC_USHC=y
CONFIG_MEMSTICK=y
CONFIG_MEMSTICK_DEBUG=y

#
# MemoryStick drivers
#
CONFIG_MEMSTICK_UNSAFE_RESUME=y

#
# MemoryStick Host Controller Drivers
#
# CONFIG_MEMSTICK_TIFM_MS is not set
CONFIG_MEMSTICK_JMICRON_38X=y
CONFIG_MEMSTICK_R592=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y

#
# LED drivers
#
CONFIG_LEDS_LM3530=y
CONFIG_LEDS_LM3533=y
# CONFIG_LEDS_LM3642 is not set
CONFIG_LEDS_PCA9532=y
# CONFIG_LEDS_PCA9532_GPIO is not set
# CONFIG_LEDS_GPIO is not set
CONFIG_LEDS_LP3944=y
CONFIG_LEDS_LP55XX_COMMON=y
CONFIG_LEDS_LP5521=y
CONFIG_LEDS_LP5523=y
CONFIG_LEDS_LP5562=y
CONFIG_LEDS_LP8788=y
CONFIG_LEDS_PCA955X=y
# CONFIG_LEDS_PCA9633 is not set
# CONFIG_LEDS_WM831X_STATUS is not set
CONFIG_LEDS_WM8350=y
CONFIG_LEDS_DA9052=y
# CONFIG_LEDS_DAC124S085 is not set
CONFIG_LEDS_PWM=y
# CONFIG_LEDS_REGULATOR is not set
CONFIG_LEDS_BD2802=y
CONFIG_LEDS_LT3593=y
CONFIG_LEDS_ADP5520=y
# CONFIG_LEDS_DELL_NETBOOKS is not set
# CONFIG_LEDS_MC13783 is not set
# CONFIG_LEDS_TCA6507 is not set
CONFIG_LEDS_MAX8997=y
# CONFIG_LEDS_LM355x is not set
CONFIG_LEDS_OT200=y
CONFIG_LEDS_BLINKM=y

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
# CONFIG_LEDS_TRIGGER_TIMER is not set
# CONFIG_LEDS_TRIGGER_ONESHOT is not set
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
CONFIG_LEDS_TRIGGER_CPU=y
CONFIG_LEDS_TRIGGER_GPIO=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y

#

# iptables trigger is under Netfilter config (LED target)
#
CONFIG_LEDS_TRIGGER_TRANSIENT=y
# CONFIG_LEDS_TRIGGER_CAMERA is not set
CONFIG_ACCESSIBILITY=y
# CONFIG_INFINIBAND is not set
CONFIG_EDAC=y
# CONFIG_EDAC_LEGACY_SYSFS is not set
CONFIG_EDAC_DEBUG=y
# CONFIG_EDAC_MM_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
# CONFIG_RTC_SYSTOHC is not set
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
CONFIG_RTC_DEBUG=y

#
# RTC interfaces
#
# CONFIG_RTC_INTF_SYSFS is not set
CONFIG_RTC_INTF_DEV=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
CONFIG_RTC_DRV_TEST=y

#
# I2C RTC drivers
#
CONFIG_RTC_DRV_DS1307=y
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
CONFIG_RTC_DRV_DS3232=y
# CONFIG_RTC_DRV_LP8788 is not set
CONFIG_RTC_DRV_MAX6900=y
CONFIG_RTC_DRV_MAX8998=y
CONFIG_RTC_DRV_MAX8997=y
# CONFIG_RTC_DRV_RS5C372 is not set
CONFIG_RTC_DRV_ISL1208=y
CONFIG_RTC_DRV_ISL12022=y
CONFIG_RTC_DRV_X1205=y
CONFIG_RTC_DRV_PCF2127=y
CONFIG_RTC_DRV_PCF8523=y
# CONFIG_RTC_DRV_PCF8563 is not set
CONFIG_RTC_DRV_PCF8583=y
CONFIG_RTC_DRV_M41T80=y
CONFIG_RTC_DRV_M41T80_WDT=y
# CONFIG_RTC_DRV_BQ32K is not set
CONFIG_RTC_DRV_TPS6586X=y
CONFIG_RTC_DRV_TPS65910=y
CONFIG_RTC_DRV_RC5T583=y
CONFIG_RTC_DRV_S35390A=y
CONFIG_RTC_DRV_FM3130=y
CONFIG_RTC_DRV_RX8581=y
# CONFIG_RTC_DRV_RX8025 is not set
# CONFIG_RTC_DRV_EM3027 is not set
CONFIG_RTC_DRV_RV3029C2=y

#
# SPI RTC drivers
#
CONFIG_RTC_DRV_M41T93=y
CONFIG_RTC_DRV_M41T94=y
CONFIG_RTC_DRV_DS1305=y
CONFIG_RTC_DRV_DS1390=y
CONFIG_RTC_DRV_MAX6902=y
CONFIG_RTC_DRV_R9701=y
CONFIG_RTC_DRV_RS5C348=y
CONFIG_RTC_DRV_DS3234=y
CONFIG_RTC_DRV_PCF2123=y
CONFIG_RTC_DRV_RX4581=y

#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
CONFIG_RTC_DRV_DS1286=y
CONFIG_RTC_DRV_DS1511=y
# CONFIG_RTC_DRV_DS1553 is not set
CONFIG_RTC_DRV_DS1742=y
# CONFIG_RTC_DRV_DA9052 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
CONFIG_RTC_DRV_M48T86=y
CONFIG_RTC_DRV_M48T35=y
CONFIG_RTC_DRV_M48T59=y
CONFIG_RTC_DRV_MSM6242=y
CONFIG_RTC_DRV_BQ4802=y
CONFIG_RTC_DRV_RP5C01=y
# CONFIG_RTC_DRV_V3020 is not set
# CONFIG_RTC_DRV_DS2404 is not set
# CONFIG_RTC_DRV_WM831X is not set
CONFIG_RTC_DRV_WM8350=y
CONFIG_RTC_DRV_PCF50633=y

#
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_PCAP=y
CONFIG_RTC_DRV_MC13XXX=y

#
# HID Sensor RTC drivers
#
CONFIG_RTC_DRV_HID_SENSOR_TIME=y
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
CONFIG_UIO=y
CONFIG_UIO_CIF=y
# CONFIG_UIO_PDRV is not set
# CONFIG_UIO_PDRV_GENIRQ is not set
CONFIG_UIO_DMEM_GENIRQ=y
# CONFIG_UIO_AEC is not set
CONFIG_UIO_SERCOS3=y
CONFIG_UIO_PCI_GENERIC=y
CONFIG_UIO_NETX=y
# CONFIG_VIRT_DRIVERS is not set
CONFIG_VIRTIO=y

#
# Virtio drivers
#
# CONFIG_VIRTIO_PCI is not set
CONFIG_VIRTIO_BALLOON=y
CONFIG_VIRTIO_MMIO=y
CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y

#
# Microsoft Hyper-V guest support
#
# CONFIG_HYPERV is not set
CONFIG_STAGING=y
CONFIG_SLICOSS=y
CONFIG_USBIP_CORE=y
CONFIG_USBIP_VHCI_HCD=y
CONFIG_USBIP_HOST=y
CONFIG_USBIP_DEBUG=y
CONFIG_ECHO=y
# CONFIG_ASUS_OLED is not set
# CONFIG_PANEL is not set
CONFIG_TRANZPORT=y
# CONFIG_DX_SEP is not set

#
# IIO staging drivers
#

#
# Accelerometers
#
# CONFIG_ADIS16201 is not set
# CONFIG_ADIS16203 is not set
CONFIG_ADIS16204=y
CONFIG_ADIS16209=y
# CONFIG_ADIS16220 is not set
CONFIG_ADIS16240=y
CONFIG_LIS3L02DQ=y
CONFIG_SCA3000=y

#
# Analog to digital converters
#
CONFIG_AD7291=y
CONFIG_AD7606=y
# CONFIG_AD7606_IFACE_PARALLEL is not set
# CONFIG_AD7606_IFACE_SPI is not set
CONFIG_AD799X=y
CONFIG_AD799X_RING_BUFFER=y
# CONFIG_AD7780 is not set
# CONFIG_AD7816 is not set
# CONFIG_AD7192 is not set
CONFIG_AD7280=y

#
# Analog digital bi-direction converters
#
# CONFIG_ADT7316 is not set

#
# Capacitance to digital converters
#
# CONFIG_AD7150 is not set
CONFIG_AD7152=y
# CONFIG_AD7746 is not set

#
# Direct Digital Synthesis
#
CONFIG_AD5930=y
CONFIG_AD9832=y
CONFIG_AD9834=y
# CONFIG_AD9850 is not set
CONFIG_AD9852=y
CONFIG_AD9910=y
# CONFIG_AD9951 is not set

#
# Digital gyroscope sensors
#
CONFIG_ADIS16060=y
CONFIG_ADIS16260=y

#
# Network Analyzer, Impedance Converters
#
CONFIG_AD5933=y

#
# Light sensors
#
CONFIG_SENSORS_ISL29018=y
CONFIG_SENSORS_ISL29028=y
# CONFIG_TSL2583 is not set
# CONFIG_TSL2x7x is not set

#
# Magnetometer sensors
#
# CONFIG_SENSORS_HMC5843 is not set

#
# Active energy metering IC
#
# CONFIG_ADE7753 is not set
CONFIG_ADE7754=y
# CONFIG_ADE7758 is not set
CONFIG_ADE7759=y
CONFIG_ADE7854=y
CONFIG_ADE7854_I2C=y
CONFIG_ADE7854_SPI=y

#
# Resolver to digital converters
#
CONFIG_AD2S90=y
CONFIG_AD2S1200=y
CONFIG_AD2S1210=y

#
# Triggers - standalone
#
CONFIG_IIO_PERIODIC_RTC_TRIGGER=y
CONFIG_IIO_SIMPLE_DUMMY=y
# CONFIG_IIO_SIMPLE_DUMMY_EVENTS is not set
CONFIG_IIO_SIMPLE_DUMMY_BUFFER=y
CONFIG_ZSMALLOC=y
CONFIG_FB_SM7XX=y
CONFIG_CRYSTALHD=y
CONFIG_FB_XGI=y
# CONFIG_ACPI_QUICKSTART is not set
# CONFIG_BCM_WIMAX is not set
CONFIG_FT1000=y
CONFIG_FT1000_USB=y
CONFIG_FT1000_PCMCIA=y

#
# Speakup console speech
#
CONFIG_TOUCHSCREEN_CLEARPAD_TM1217=y
CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4=y
# CONFIG_STAGING_MEDIA is not set

#
# Android
#
# CONFIG_ANDROID is not set
# CONFIG_USB_WPAN_HCD is not set
CONFIG_WIMAX_GDM72XX=y
# CONFIG_WIMAX_GDM72XX_QOS is not set
# CONFIG_WIMAX_GDM72XX_K_MODE is not set
# CONFIG_WIMAX_GDM72XX_WIMAX2 is not set
CONFIG_WIMAX_GDM72XX_USB=y
# CONFIG_WIMAX_GDM72XX_SDIO is not set
CONFIG_WIMAX_GDM72XX_USB_PM=y
CONFIG_CED1401=y
# CONFIG_DGRP is not set
CONFIG_USB_DWC2=y
# CONFIG_USB_DWC2_DEBUG is not set
# CONFIG_USB_DWC2_TRACK_MISSED_SOFS is not set
CONFIG_X86_PLATFORM_DEVICES=y
# CONFIG_ACER_WMI is not set
# CONFIG_ACERHDF is not set
# CONFIG_ASUS_LAPTOP is not set
# CONFIG_DELL_LAPTOP is not set
# CONFIG_DELL_WMI is not set
# CONFIG_DELL_WMI_AIO is not set
# CONFIG_FUJITSU_LAPTOP is not set
# CONFIG_FUJITSU_TABLET is not set
# CONFIG_AMILO_RFKILL is not set
# CONFIG_HP_ACCEL is not set
# CONFIG_HP_WMI is not set
# CONFIG_MSI_LAPTOP is not set
# CONFIG_PANASONIC_LAPTOP is not set
# CONFIG_COMPAL_LAPTOP is not set
# CONFIG_SONY_LAPTOP is not set
# CONFIG_IDEAPAD_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_INTEL_MENLOW is not set
CONFIG_ACPI_WMI=y
# CONFIG_MSI_WMI is not set
# CONFIG_TOPSTAR_LAPTOP is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_TOSHIBA_BT_RFKILL is not set
# CONFIG_ACPI_CMPC is not set
# CONFIG_INTEL_IPS is not set
# CONFIG_IBM_RTL is not set
# CONFIG_XO15_EBOOK is not set
# CONFIG_SAMSUNG_LAPTOP is not set
CONFIG_MXM_WMI=y
# CONFIG_INTEL_OAKTRAIL is not set
# CONFIG_SAMSUNG_Q10 is not set
# CONFIG_APPLE_GMUX is not set
# CONFIG_INTEL_RST is not set
# CONFIG_INTEL_SMARTCONNECT is not set
# CONFIG_PVPANIC is not set

#
# Hardware Spinlock drivers
#
CONFIG_CLKEVT_I8253=y
CONFIG_CLKBLD_I8253=y
CONFIG_MAILBOX=y
CONFIG_IOMMU_SUPPORT=y
# CONFIG_AMD_IOMMU is not set
# CONFIG_INTEL_IOMMU is not set
# CONFIG_IRQ_REMAP is not set

#
# Remoteproc drivers
#
# CONFIG_STE_MODEM_RPROC is not set

#
# Rpmsg drivers
#
# CONFIG_PM_DEVFREQ is not set
CONFIG_EXTCON=y

#
# Extcon Device Drivers
#
# CONFIG_EXTCON_GPIO is not set
CONFIG_EXTCON_ADC_JACK=y
# CONFIG_EXTCON_MAX8997 is not set
# CONFIG_MEMORY is not set
CONFIG_IIO=y
CONFIG_IIO_BUFFER=y
# CONFIG_IIO_BUFFER_CB is not set
CONFIG_IIO_KFIFO_BUF=y
CONFIG_IIO_TRIGGERED_BUFFER=y
CONFIG_IIO_TRIGGER=y
CONFIG_IIO_CONSUMERS_PER_TRIGGER=2

#
# Accelerometers
#
CONFIG_HID_SENSOR_ACCEL_3D=y
CONFIG_KXSD9=y
# CONFIG_IIO_ST_ACCEL_3AXIS is not set

#
# Analog to digital converters
#
CONFIG_AD_SIGMA_DELTA=y
# CONFIG_AD7266 is not set
# CONFIG_AD7298 is not set
CONFIG_AD7923=y
CONFIG_AD7791=y
# CONFIG_AD7793 is not set
# CONFIG_AD7476 is not set
# CONFIG_AD7887 is not set
# CONFIG_LP8788_ADC is not set
CONFIG_MAX1363=y
CONFIG_MCP320X=y
CONFIG_TI_ADC081C=y
CONFIG_VIPERBOARD_ADC=y

#
# Amplifiers
#
# CONFIG_AD8366 is not set

#
# Hid Sensor IIO Common
#
CONFIG_HID_SENSOR_IIO_COMMON=y
CONFIG_HID_SENSOR_IIO_TRIGGER=y
# CONFIG_HID_SENSOR_ENUM_BASE_QUIRKS is not set
CONFIG_IIO_ST_SENSORS_I2C=y
CONFIG_IIO_ST_SENSORS_SPI=y
CONFIG_IIO_ST_SENSORS_CORE=y

#
# Digital to analog converters
#
# CONFIG_AD5064 is not set
CONFIG_AD5360=y
CONFIG_AD5380=y
CONFIG_AD5421=y
# CONFIG_AD5624R_SPI is not set
CONFIG_AD5446=y
CONFIG_AD5449=y
# CONFIG_AD5504 is not set
CONFIG_AD5755=y
# CONFIG_AD5764 is not set
# CONFIG_AD5791 is not set
# CONFIG_AD5686 is not set
CONFIG_AD7303=y
CONFIG_MAX517=y
# CONFIG_MCP4725 is not set

#
# Frequency Synthesizers DDS/PLL
#

#
# Clock Generator/Distribution
#
# CONFIG_AD9523 is not set

#
# Phase-Locked Loop (PLL) frequency synthesizers
#
CONFIG_ADF4350=y

#
# Digital gyroscope sensors
#
CONFIG_ADIS16080=y
CONFIG_ADIS16130=y
CONFIG_ADIS16136=y
CONFIG_ADXRS450=y
CONFIG_HID_SENSOR_GYRO_3D=y
CONFIG_IIO_ST_GYRO_3AXIS=y
CONFIG_IIO_ST_GYRO_I2C_3AXIS=y
CONFIG_IIO_ST_GYRO_SPI_3AXIS=y
# CONFIG_ITG3200 is not set

#
# Inertial measurement units
#
CONFIG_ADIS16400=y
CONFIG_ADIS16480=y
CONFIG_IIO_ADIS_LIB=y
CONFIG_IIO_ADIS_LIB_BUFFER=y
CONFIG_INV_MPU6050_IIO=y

#
# Light sensors
#
CONFIG_ADJD_S311=y
CONFIG_SENSORS_LM3533=y
CONFIG_SENSORS_TSL2563=y
CONFIG_VCNL4000=y
CONFIG_HID_SENSOR_ALS=y

#
# Magnetometer sensors
#
CONFIG_AK8975=y
CONFIG_HID_SENSOR_MAGNETOMETER_3D=y
# CONFIG_IIO_ST_MAGN_3AXIS is not set

#
# Triggers - standalone
#
CONFIG_IIO_INTERRUPT_TRIGGER=y
CONFIG_IIO_SYSFS_TRIGGER=y

#
# Pressure Sensors
#
CONFIG_IIO_ST_PRESS=y
CONFIG_IIO_ST_PRESS_I2C=y
CONFIG_IIO_ST_PRESS_SPI=y
CONFIG_NTB=y
CONFIG_VME_BUS=y

#
# VME Bridge Drivers
#
CONFIG_VME_CA91CX42=y
CONFIG_VME_TSI148=y

#
# VME Board Drivers
#
CONFIG_VMIVME_7805=y

#
# VME Device Drivers
#
CONFIG_VME_USER=y
# CONFIG_VME_PIO2 is not set
CONFIG_PWM=y
CONFIG_PWM_SYSFS=y
CONFIG_IPACK_BUS=y
# CONFIG_BOARD_TPCI200 is not set
# CONFIG_SERIAL_IPOCTAL is not set
# CONFIG_RESET_CONTROLLER is not set
CONFIG_FMC=y
# CONFIG_FMC_FAKEDEV is not set
CONFIG_FMC_TRIVIAL=y
# CONFIG_FMC_WRITE_EEPROM is not set
# CONFIG_FMC_CHARDEV is not set

#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_DELL_RBU=y
CONFIG_DCDBAS=y
# CONFIG_ISCSI_IBFT_FIND is not set
# CONFIG_GOOGLE_FIRMWARE is not set

#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
# CONFIG_FS_POSIX_ACL is not set
CONFIG_EXPORTFS=y
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
# CONFIG_QUOTA is not set
# CONFIG_QUOTACTL is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=y
CONFIG_CUSE=y

#
# Caches
#
# CONFIG_FSCACHE is not set

#
# Pseudo filesystems
#
# CONFIG_PROC_FS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
# CONFIG_TMPFS is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=y
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ECRYPT_FS is not set
# CONFIG_JFFS2_FS is not set
CONFIG_LOGFS=y
CONFIG_ROMFS_FS=y
CONFIG_ROMFS_BACKED_BY_MTD=y
CONFIG_ROMFS_ON_MTD=y
CONFIG_PSTORE=y
CONFIG_PSTORE_CONSOLE=y
# CONFIG_PSTORE_RAM is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V2 is not set
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
# CONFIG_NFS_SWAP is not set
# CONFIG_NFS_V4_1 is not set
# CONFIG_ROOT_NFS is not set
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
CONFIG_NFSD=y
# CONFIG_NFSD_V3 is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
CONFIG_CEPH_FS=y
# CONFIG_CIFS is not set
CONFIG_NCP_FS=y
# CONFIG_NCPFS_PACKET_SIGNING is not set
CONFIG_NCPFS_IOCTL_LOCKING=y
CONFIG_NCPFS_STRONG=y
# CONFIG_NCPFS_NFS_NS is not set
# CONFIG_NCPFS_OS2_NS is not set
CONFIG_NCPFS_SMALLDOS=y
CONFIG_NCPFS_NLS=y
# CONFIG_NCPFS_EXTRAS is not set
CONFIG_CODA_FS=y
# CONFIG_AFS_FS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=y
CONFIG_NLS_CODEPAGE_775=y
CONFIG_NLS_CODEPAGE_850=y
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
CONFIG_NLS_CODEPAGE_857=y
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
CONFIG_NLS_CODEPAGE_863=y
CONFIG_NLS_CODEPAGE_864=y
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
CONFIG_NLS_CODEPAGE_950=y
CONFIG_NLS_CODEPAGE_932=y
CONFIG_NLS_CODEPAGE_949=y
CONFIG_NLS_CODEPAGE_874=y
CONFIG_NLS_ISO8859_8=y
CONFIG_NLS_CODEPAGE_1250=y
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=y
CONFIG_NLS_ISO8859_3=y
# CONFIG_NLS_ISO8859_4 is not set
CONFIG_NLS_ISO8859_5=y
CONFIG_NLS_ISO8859_6=y
CONFIG_NLS_ISO8859_7=y
CONFIG_NLS_ISO8859_9=y
CONFIG_NLS_ISO8859_13=y
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_MAC_ROMAN=y
# CONFIG_NLS_MAC_CELTIC is not set
# CONFIG_NLS_MAC_CENTEURO is not set
CONFIG_NLS_MAC_CROATIAN=y
# CONFIG_NLS_MAC_CYRILLIC is not set
# CONFIG_NLS_MAC_GAELIC is not set
# CONFIG_NLS_MAC_GREEK is not set
# CONFIG_NLS_MAC_ICELAND is not set
# CONFIG_NLS_MAC_INUIT is not set
# CONFIG_NLS_MAC_ROMANIAN is not set
# CONFIG_NLS_MAC_TURKISH is not set
CONFIG_NLS_UTF8=y
CONFIG_DLM=y
CONFIG_DLM_DEBUG=y

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y

#

# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_DYNAMIC_DEBUG is not set

#
# Compile-time checks and compiler options
#
# CONFIG_DEBUG_INFO is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_READABLE_ASM is not set
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
# CONFIG_MAGIC_SYSRQ is not set
CONFIG_DEBUG_KERNEL=y

#
# Memory Debugging
#
CONFIG_DEBUG_PAGEALLOC=y
CONFIG_WANT_PAGE_DEBUG_FLAGS=y
CONFIG_PAGE_GUARD=y
CONFIG_DEBUG_OBJECTS=y
# CONFIG_DEBUG_OBJECTS_SELFTEST is not set
# CONFIG_DEBUG_OBJECTS_FREE is not set
CONFIG_DEBUG_OBJECTS_TIMERS=y
CONFIG_DEBUG_OBJECTS_WORK=y
CONFIG_DEBUG_OBJECTS_RCU_HEAD=y
# CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER is not set
CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
# CONFIG_DEBUG_SLAB is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
CONFIG_DEBUG_STACK_USAGE=y
CONFIG_DEBUG_VM=y
# CONFIG_DEBUG_VM_RB is not set
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_DEBUG_SHIRQ is not set

#
# Debug Lockups and Hangs
#
# CONFIG_LOCKUP_DETECTOR is not set
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_DEBUG_PREEMPT=y

#
# Lock Debugging (spinlocks, mutexes, etc...)
#
# CONFIG_DEBUG_RT_MUTEXES is not set
CONFIG_RT_MUTEX_TESTER=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
CONFIG_LOCKDEP=y
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_LOCKDEP is not set
CONFIG_DEBUG_ATOMIC_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_TRACE_IRQFLAGS=y
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_KOBJECT_RELEASE=y
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_WRITECOUNT=y
CONFIG_DEBUG_LIST=y
CONFIG_DEBUG_SG=y
# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_DEBUG_CREDENTIALS=y

#
# RCU Debugging
#
# CONFIG_PROVE_RCU is not set
# CONFIG_PROVE_RCU_DELAY is not set
CONFIG_SPARSE_RCU_POINTER=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=21
# CONFIG_RCU_CPU_STALL_VERBOSE is not set
CONFIG_RCU_CPU_STALL_INFO=y
CONFIG_RCU_TRACE=y
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
CONFIG_FAULT_INJECTION=y
# CONFIG_FAILSLAB is not set
# CONFIG_FAIL_PAGE_ALLOC is not set
CONFIG_FAIL_MMC_REQUEST=y
# CONFIG_FAULT_INJECTION_DEBUG_FS is not set
CONFIG_ARCH_HAS_DEBUG_STRICT_USER_COPY_CHECKS=y
# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_FENTRY=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACE_CLOCK=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set

#
# Runtime Testing
#
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
CONFIG_ATOMIC64_SELFTEST=y
CONFIG_TEST_STRING_HELPERS=y
CONFIG_TEST_KSTRTOX=y
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
CONFIG_BUILD_DOCSRC=y
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_STRICT_DEVMEM is not set
# CONFIG_X86_VERBOSE_BOOTUP is not set
# CONFIG_EARLY_PRINTK is not set
# CONFIG_X86_PTDUMP is not set
# CONFIG_DEBUG_RODATA is not set
# CONFIG_DOUBLEFAULT is not set
CONFIG_DEBUG_TLBFLUSH=y
CONFIG_IOMMU_STRESS=y
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
# CONFIG_IO_DELAY_0X80 is not set
CONFIG_IO_DELAY_0XED=y
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=1
CONFIG_DEBUG_BOOT_PARAMS=y
# CONFIG_CPA_DEBUG is not set
CONFIG_OPTIMIZE_INLINING=y
# CONFIG_DEBUG_NMI_SELFTEST is not set
# CONFIG_X86_DEBUG_STATIC_CPU_HAS is not set

#
# Security options
#
CONFIG_KEYS=y
# CONFIG_TRUSTED_KEYS is not set
# CONFIG_ENCRYPTED_KEYS is not set
# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
CONFIG_SECURITY_DMESG_RESTRICT=y
# CONFIG_SECURITY is not set
CONFIG_SECURITYFS=y
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_USER=y
# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_PCRYPT=y
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=y
CONFIG_CRYPTO_AUTHENC=y
CONFIG_CRYPTO_ABLK_HELPER_X86=y
CONFIG_CRYPTO_GLUE_HELPER_X86=y

#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
CONFIG_CRYPTO_GCM=y
CONFIG_CRYPTO_SEQIV=y

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=y
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_XTS=y

#
# Hash modes
#
CONFIG_CRYPTO_CMAC=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=y
CONFIG_CRYPTO_VMAC=y

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CRC32C_INTEL is not set
CONFIG_CRYPTO_CRC32=y
# CONFIG_CRYPTO_CRC32_PCLMUL is not set
CONFIG_CRYPTO_CRCT10DIF=y
# CONFIG_CRYPTO_CRCT10DIF_PCLMUL is not set
CONFIG_CRYPTO_GHASH=y
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=y
# CONFIG_CRYPTO_RMD128 is not set
CONFIG_CRYPTO_RMD160=y
CONFIG_CRYPTO_RMD256=y
CONFIG_CRYPTO_RMD320=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA1_SSSE3=y
CONFIG_CRYPTO_SHA256_SSSE3=y
CONFIG_CRYPTO_SHA512_SSSE3=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_TGR192=y
CONFIG_CRYPTO_WP512=y
CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=y

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_X86_64 is not set
# CONFIG_CRYPTO_AES_NI_INTEL is not set CONFIG_CRYPTO_ANUBIS=y
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_BLOWFISH=y CONFIG_CRYPTO_BLOWFISH_COMMON=y CONFIG_CRYPTO_BLOWFISH_X86_64=y
# CONFIG_CRYPTO_CAMELLIA is not set CONFIG_CRYPTO_CAMELLIA_X86_64=y CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64=y
# CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64 is not set CONFIG_CRYPTO_CAST_COMMON=y CONFIG_CRYPTO_CAST5=y
# CONFIG_CRYPTO_CAST5_AVX_X86_64 is not set CONFIG_CRYPTO_CAST6=y CONFIG_CRYPTO_CAST6_AVX_X86_64=y CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=y
# CONFIG_CRYPTO_KHAZAD is not set CONFIG_CRYPTO_SALSA20=y
# CONFIG_CRYPTO_SALSA20_X86_64 is not set CONFIG_CRYPTO_SEED=y
CONFIG_CRYPTO_SERPENT=y
# CONFIG_CRYPTO_SERPENT_SSE2_X86_64 is not set CONFIG_CRYPTO_SERPENT_AVX_X86_64=y CONFIG_CRYPTO_SERPENT_AVX2_X86_64=y
# CONFIG_CRYPTO_TEA is not set CONFIG_CRYPTO_TWOFISH=y CONFIG_CRYPTO_TWOFISH_COMMON=y CONFIG_CRYPTO_TWOFISH_X86_64=y CONFIG_CRYPTO_TWOFISH_X86_64_3WAY=y CONFIG_CRYPTO_TWOFISH_AVX_X86_64=y

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
# CONFIG_CRYPTO_LZ4 is not set
CONFIG_CRYPTO_LZ4HC=y

#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_USER_API=y
CONFIG_CRYPTO_USER_API_HASH=y
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
# CONFIG_CRYPTO_HW is not set
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_PUBLIC_KEY_ALGO_RSA=y
CONFIG_X509_CERTIFICATE_PARSER=y
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_IRQ_ROUTING=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_APIC_ARCHITECTURE=y
CONFIG_KVM_MMIO=y
CONFIG_KVM_ASYNC_PF=y
CONFIG_HAVE_KVM_MSI=y
CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=y
# CONFIG_KVM_INTEL is not set
CONFIG_KVM_AMD=y
# CONFIG_BINARY_PRINTF is not set

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_IO=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
CONFIG_CRC32_SELFTEST=y
# CONFIG_CRC32_SLICEBY8 is not set
CONFIG_CRC32_SLICEBY4=y
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
CONFIG_CRC7=y
CONFIG_LIBCRC32C=y
# CONFIG_CRC8 is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4HC_COMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_XZ_DEC=y
# CONFIG_XZ_DEC_X86 is not set
# CONFIG_XZ_DEC_POWERPC is not set
CONFIG_XZ_DEC_IA64=y
# CONFIG_XZ_DEC_ARM is not set
# CONFIG_XZ_DEC_ARMTHUMB is not set
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_REED_SOLOMON=y
CONFIG_REED_SOLOMON_DEC16=y
CONFIG_BCH=y
CONFIG_BCH_CONST_PARAMS=y
CONFIG_BTREE=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_CPUMASK_OFFSTACK=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_NLATTR=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
# CONFIG_AVERAGE is not set
CONFIG_CLZ_TAB=y
CONFIG_CORDIC=y
CONFIG_DDR=y
CONFIG_MPILIB=y
CONFIG_OID_REGISTRY=y

_______________________________________________
Xen-devel mailing list
[email protected]
http://lists.xen.org/xen-devel

#27 lore raw
In reply to Linus Torvalds
Quoted 8 lines · Linus Torvalds
Quoted 2 lines · Fengguang Wu

Yeah, I see no timer usage in parport_pc driver, so it's still questionable.

The timer itself comes simply from the delayed_work that is used to delay the freeing of the kobject.

So that is not the surprising part.

OK.

Quoted 5 lines

The surprising part is that I don't see parport_pc doing anything odd/bad with its kobject embedded in the 'struct dev'. It seems to just do a platform_device_register_simple() followed by a platform_device_unregister().

Quoted 12 lines

At least that's true for the normal parport_pc_probe_port() case that just passes in a NULL dev... But I only glanced at the driver, so I might have missed something.

Quoted 8 lines

with some manual bisects, I find a good config (attached) that can reliably boot the kernel up.

Based on that config, I tried adding parport_pc and see that it still boots fine.

Adding drm, however will bring back the oops. Will try a kernel based on the original kconfig with drm disabled only.

FYI I just confirmed that the original bad kconfig can be made bootable by simply disabling CONFIG_DRM.

Quoted 6 lines

Ok. The list corruption (which also pointed at parport_pc) might well be corrupted by removing the entries before or after the parport_pc, and moving the corruption to parport_pc that way (through the "prev->next = next" thing in list handling). So maybe it was something else all along. You could enable CONFIG_DEBUG_LIST to see if that triggers some dump earlier..

OK, I'll try enabling CONFIG_DEBUG_LIST.

Thanks,
Fengguang

#28 lore raw
In reply to Fengguang Wu
Quoted 2 lines · Fengguang Wu

Yeah, I see no timer usage in parport_pc driver, so it's still questionable.

The timer itself comes simply from the delayed_work that is used to delay the freeing of the kobject.

So that is not the surprising part.

The surprising part is that I don't see parport_pc doing anything odd/bad with its kobject embedded in the 'struct dev'. It seems to just do a platform_device_register_simple() followed by a platform_device_unregister().

At least that's true for the normal parport_pc_probe_port() case that just passes in a NULL dev... But I only glanced at the driver, so I might have missed something.

Quoted 8 lines

with some manual bisects, I find a good config (attached) that can reliably boot the kernel up.

Based on that config, I tried adding parport_pc and see that it still boots fine.

Adding drm, however will bring back the oops. Will try a kernel based on the original kconfig with drm disabled only.

Ok. The list corruption (which also pointed at parport_pc) might well be corrupted by removing the entries before or after the parport_pc, and moving the corruption to parport_pc that way (through the "prev->next = next" thing in list handling). So maybe it was something else all along. You could enable CONFIG_DEBUG_LIST to see if that triggers some dump earlier..

Linus

#29 lore raw
In reply to Fengguang Wu

Hi Russell,

Quoted 13 lines

I'm now trying to disable all drivers shows up in the kobject_release messages:

[    2.756392] kobject: 'ipmi_si' (ffff880007764a00): kobject_release, parent ffff8800001b7648 (delayed)
[    2.758091] kobject: 'ipmi_si' (ffff880007764800): kobject_release, parent ffff880000221248 (delayed)
[    2.759858] kobject: 'ipmi_si' (ffff880007764c00): kobject_release, parent ffff880000189248 (delayed)
[    2.929669] kobject: 'drm' (ffff880006db2848): kobject_release, parent ffff880000189648 (delayed)
[    2.932143] kobject: 'drm' (ffff880006daf000): kobject_release, parent           (null) (delayed)
[    2.941844] kobject: 'controlD64' (ffff880006db2020): kobject_release, parent           (null) (delayed)
[    2.958432] kobject: 'parport_pc.956' (ffff880006db2020): kobject_release, parent           (null) (delayed)
[    2.965698] kobject: 'parport_pc.888' (ffff880006dc5820): kobject_release, parent           (null) (delayed)
[    2.972583] kobject: 'parport_pc.632' (ffff880006dc5020): kobject_release, parent           (null) (delayed)
[    3.031704] kobject: 'physmap-flash' (ffff880006ddc800): kobject_release, parent ffff880000189248 (delayed)
[    3.055119] kobject: 'docg3' (ffff880006de3c00): kobject_release, parent ffff880000189248 (delayed)
Quoted 8 lines
[    3.496256] kobject: 'gpio-vbus' (ffff880006817400): kobject_release, parent ffff880000189248 (delayed)
[    3.619023] kobject: '(null)' (ffff88000777baf0): kobject_release, parent           (null) (delayed)
[    3.657587] kobject: 'proc-osm' (ffff88000684be00): kobject_release, parent ffff880006849848 (delayed)
[    3.662546] kobject: 'mc13xxx-rtc' (ffff880006851e00): kobject_release, parent ffff880000189248 (delayed)
[    3.669144] kobject: 'rtc-msm6242' (ffff880006851c00): kobject_release, parent ffff880000189248 (delayed)
[    3.677494] kobject: 'pcap-rtc' (ffff880006851a00): kobject_release, parent ffff880000189248 (delayed)
[    3.680280] kobject: 'rtc-rp5c01' (ffff880006855a00): kobject_release, parent ffff880000189248 (delayed)
[    3.750200] kobject: 'mc13783-adc' (ffff880007707000): kobject_release, parent ffff880000189248 (delayed)

I find the above debug messages very helpful in locating the buggy driver. How about enabling it whenever CONFIG_DEBUG_KOBJECT_RELEASE is enabled? Something like

#ifdef CONFIG_DEBUG_KOBJECT_RELEASE
- pr_debug("kobject: '%s' (%p): %s, parent %p (delayed)\n",
+ printk(KERN_INFO "kobject: '%s' (%p): %s, parent %p (delayed)\n",

                 kobject_name(kobj), kobj, __func__, kobj->parent);

pr_debug() won't be displayed by default, and it depends on CONFIG_DYNAMIC_DEBUG.

Quoted 8 lines

with some manual bisects, I find a good config (attached) that can reliably boot the kernel up.

Based on that config, I tried adding parport_pc and see that it still boots fine.

Adding drm, however will bring back the oops. Will try a kernel based on the original kconfig with drm disabled only.

Thanks,
Fengguang

#30 lore raw
In reply to Fengguang Wu

Hi Russell,

Quoted 13 lines

I'm now trying to disable all drivers shows up in the kobject_release messages:

[    2.756392] kobject: 'ipmi_si' (ffff880007764a00): kobject_release, parent ffff8800001b7648 (delayed)
[    2.758091] kobject: 'ipmi_si' (ffff880007764800): kobject_release, parent ffff880000221248 (delayed)
[    2.759858] kobject: 'ipmi_si' (ffff880007764c00): kobject_release, parent ffff880000189248 (delayed)
[    2.929669] kobject: 'drm' (ffff880006db2848): kobject_release, parent ffff880000189648 (delayed)
[    2.932143] kobject: 'drm' (ffff880006daf000): kobject_release, parent           (null) (delayed)
[    2.941844] kobject: 'controlD64' (ffff880006db2020): kobject_release, parent           (null) (delayed)
[    2.958432] kobject: 'parport_pc.956' (ffff880006db2020): kobject_release, parent           (null) (delayed)
[    2.965698] kobject: 'parport_pc.888' (ffff880006dc5820): kobject_release, parent           (null) (delayed)
[    2.972583] kobject: 'parport_pc.632' (ffff880006dc5020): kobject_release, parent           (null) (delayed)
[    3.031704] kobject: 'physmap-flash' (ffff880006ddc800): kobject_release, parent ffff880000189248 (delayed)
[    3.055119] kobject: 'docg3' (ffff880006de3c00): kobject_release, parent ffff880000189248 (delayed)
Quoted 8 lines
[    3.496256] kobject: 'gpio-vbus' (ffff880006817400): kobject_release, parent ffff880000189248 (delayed)
[    3.619023] kobject: '(null)' (ffff88000777baf0): kobject_release, parent           (null) (delayed)
[    3.657587] kobject: 'proc-osm' (ffff88000684be00): kobject_release, parent ffff880006849848 (delayed)
[    3.662546] kobject: 'mc13xxx-rtc' (ffff880006851e00): kobject_release, parent ffff880000189248 (delayed)
[    3.669144] kobject: 'rtc-msm6242' (ffff880006851c00): kobject_release, parent ffff880000189248 (delayed)
[    3.677494] kobject: 'pcap-rtc' (ffff880006851a00): kobject_release, parent ffff880000189248 (delayed)
[    3.680280] kobject: 'rtc-rp5c01' (ffff880006855a00): kobject_release, parent ffff880000189248 (delayed)
[    3.750200] kobject: 'mc13783-adc' (ffff880007707000): kobject_release, parent ffff880000189248 (delayed)

I find the above debug messages very helpful in locating the buggy driver. How about enabling it whenever CONFIG_DEBUG_KOBJECT_RELEASE is enabled? Something like

#ifdef CONFIG_DEBUG_KOBJECT_RELEASE
- pr_debug("kobject: '%s' (%p): %s, parent %p (delayed)\n",
+ printk(KERN_INFO "kobject: '%s' (%p): %s, parent %p (delayed)\n",

                 kobject_name(kobj), kobj, __func__, kobj->parent);

pr_debug() won't be displayed by default, and it depends on CONFIG_DYNAMIC_DEBUG.

Quoted 8 lines

with some manual bisects, I find a good config (attached) that can reliably boot the kernel up.

Based on that config, I tried adding parport_pc and see that it still boots fine.

Adding drm, however will bring back the oops. Will try a kernel based on the original kconfig with drm disabled only.

Thanks,
Fengguang

#31 lore raw
Quoted 11 lines · Fengguang Wu

I find the above debug messages very helpful in locating the buggy driver. How about enabling it whenever CONFIG_DEBUG_KOBJECT_RELEASE is enabled? Something like

#ifdef CONFIG_DEBUG_KOBJECT_RELEASE

(quoted diff) +1 -1
-       pr_debug("kobject: '%s' (%p): %s, parent %p (delayed)\n",
+       printk(KERN_INFO "kobject: '%s' (%p): %s, parent %p (delayed)\n",
                 kobject_name(kobj), kobj, __func__, kobj->parent);

pr_debug() won't be displayed by default, and it depends on CONFIG_DYNAMIC_DEBUG.

Please consider using pr_info() instead of printk(KERN_INFO - it's slightly less typing.

I can see that being a useful change while we have these problematical instances to track down, but I do wonder whether it'll make the thing too noisy. Does anyone have other opinions on this point? Linus? Greg?

#32 lore raw
In reply to Fengguang Wu
Quoted 11 lines · Fengguang Wu

I find the above debug messages very helpful in locating the buggy driver. How about enabling it whenever CONFIG_DEBUG_KOBJECT_RELEASE is enabled? Something like

#ifdef CONFIG_DEBUG_KOBJECT_RELEASE

(quoted diff) +1 -1
-       pr_debug("kobject: '%s' (%p): %s, parent %p (delayed)\n",
+       printk(KERN_INFO "kobject: '%s' (%p): %s, parent %p (delayed)\n",
                 kobject_name(kobj), kobj, __func__, kobj->parent);

pr_debug() won't be displayed by default, and it depends on CONFIG_DYNAMIC_DEBUG.

Please consider using pr_info() instead of printk(KERN_INFO - it's slightly less typing.

I can see that being a useful change while we have these problematical instances to track down, but I do wonder whether it'll make the thing too noisy. Does anyone have other opinions on this point? Linus? Greg?

#33 lore raw
Quoted 13 lines · Russell King - ARM Linux
Quoted 11 lines · Fengguang Wu

I find the above debug messages very helpful in locating the buggy driver. How about enabling it whenever CONFIG_DEBUG_KOBJECT_RELEASE is enabled? Something like

#ifdef CONFIG_DEBUG_KOBJECT_RELEASE

(quoted diff) +1 -1
-       pr_debug("kobject: '%s' (%p): %s, parent %p (delayed)\n",
+       printk(KERN_INFO "kobject: '%s' (%p): %s, parent %p (delayed)\n",
                 kobject_name(kobj), kobj, __func__, kobj->parent);

pr_debug() won't be displayed by default, and it depends on CONFIG_DYNAMIC_DEBUG.

Quoted 7 lines

Please consider using pr_info() instead of printk(KERN_INFO - it's slightly less typing.

I can see that being a useful change while we have these problematical instances to track down, but I do wonder whether it'll make the thing too noisy. Does anyone have other opinions on this point? Linus? Greg?

It's going to make things really noisy at boot time, but then it should settle down and not be bad at all. Let's try it and see if it helps or not.

thanks,

greg k-h

#34 lore raw
Quoted 4 lines · Greg Kroah-Hartman

It's going to make things really noisy at boot time, but then it should settle down and not be bad at all. Let's try it and see if it helps or not.

Yeah. And quite frankly, normally that whole DEBUG_KOBJECT_RELEASE thing is hopefully only enabled in debug kernels (like maybe the Fedora rawhide one, or at developers), so being a bit more verbose is likely ok.

Linus

#35 lore raw
Quoted 3 lines · Linus Torvalds

normally that whole DEBUG_KOBJECT_RELEASE
thing is hopefully only enabled in debug kernels (like maybe the Fedora rawhide one

Nope. After spending a couple of days fruitlessly trying to get my machine to boot with it enabled, I think we decided it's not worth the pain. Debugging
"hangs instantly and silently on boot" bugs are hard enough when you're in front of the machine, doing so via bugzilla isn't something I'd wish on my worst enemy.

Dave

#36 lore raw
In reply to Linus Torvalds
Quoted 3 lines · Linus Torvalds

normally that whole DEBUG_KOBJECT_RELEASE
thing is hopefully only enabled in debug kernels (like maybe the Fedora rawhide one

Nope. After spending a couple of days fruitlessly trying to get my machine to boot with it enabled, I think we decided it's not worth the pain. Debugging
"hangs instantly and silently on boot" bugs are hard enough when you're in front of the machine, doing so via bugzilla isn't something I'd wish on my worst enemy.

Dave

#37 lore raw

PATCH 1/1 kobject: show debug info on delayed kobject release

Useful for locating buggy drivers on kernel oops.

It may add dozens of new lines to boot dmesg. DEBUG_KOBJECT_RELEASE is hopefully only enabled in debug kernels (like maybe the Fedora rawhide one, or at developers), so being a bit more verbose is likely ok.

CC Russell King - ARM Linux <[email protected]>
CC Greg Kroah-Hartman <[email protected]>
---
 lib/kobject.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
lib/kobject.c +1 -1
index 669bf19..084f7b1 100644
@@ -592,7 +592,7 @@ static void kobject_release(struct kref *kref)
 {
 	struct kobject *kobj = container_of(kref, struct kobject, kref);
 #ifdef CONFIG_DEBUG_KOBJECT_RELEASE
-	pr_debug("kobject: '%s' (%p): %s, parent %p (delayed)\n",
+	pr_info("kobject: '%s' (%p): %s, parent %p (delayed)\n",
 		 kobject_name(kobj), kobj, __func__, kobj->parent);
 	INIT_DELAYED_WORK(&kobj->release, kobject_delayed_cleanup);
 	schedule_delayed_work(&kobj->release, HZ);
Signature · 1 line
1.7.10.4
Acked-by Russell King on v1 1/1
#38 lore raw

Re: [PATCH] kobject: show debug info on delayed kobject release

Quoted 7 lines · Fengguang Wu

Useful for locating buggy drivers on kernel oops.

It may add dozens of new lines to boot dmesg. DEBUG_KOBJECT_RELEASE is hopefully only enabled in debug kernels (like maybe the Fedora rawhide one, or at developers), so being a bit more verbose is likely ok.

CC Russell King - ARM Linux <[email protected]>

Thanks.

Acked-by Russell King on v1 1/1
#39 lore raw

Re: [PATCH] kobject: show debug info on delayed kobject release

In reply to Fengguang Wu
Quoted 7 lines · Fengguang Wu

Useful for locating buggy drivers on kernel oops.

It may add dozens of new lines to boot dmesg. DEBUG_KOBJECT_RELEASE is hopefully only enabled in debug kernels (like maybe the Fedora rawhide one, or at developers), so being a bit more verbose is likely ok.

CC Russell King - ARM Linux <[email protected]>

Thanks.

#40 lore raw

PATCH 1/1 kobject: show debug info on delayed kobject release

In reply to Dave Jones

Useful for locating buggy drivers on kernel oops.

It may add dozens of new lines to boot dmesg. DEBUG_KOBJECT_RELEASE is hopefully only enabled in debug kernels (like maybe the Fedora rawhide one, or at developers), so being a bit more verbose is likely ok.

CC Russell King - ARM Linux <[email protected]>
CC Greg Kroah-Hartman <[email protected]>
---
 lib/kobject.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
lib/kobject.c +1 -1
index 669bf19..084f7b1 100644
@@ -592,7 +592,7 @@ static void kobject_release(struct kref *kref)
 {
 	struct kobject *kobj = container_of(kref, struct kobject, kref);
 #ifdef CONFIG_DEBUG_KOBJECT_RELEASE
-	pr_debug("kobject: '%s' (%p): %s, parent %p (delayed)\n",
+	pr_info("kobject: '%s' (%p): %s, parent %p (delayed)\n",
 		 kobject_name(kobj), kobj, __func__, kobj->parent);
 	INIT_DELAYED_WORK(&kobj->release, kobject_delayed_cleanup);
 	schedule_delayed_work(&kobj->release, HZ);
Signature · 1 line
1.7.10.4
#41 lore raw
In reply to Linus Torvalds
Quoted 11 lines · Linus Torvalds
Quoted 4 lines · Greg Kroah-Hartman

It's going to make things really noisy at boot time, but then it should settle down and not be bad at all. Let's try it and see if it helps or not.

Yeah. And quite frankly, normally that whole DEBUG_KOBJECT_RELEASE thing is hopefully only enabled in debug kernels (like maybe the Fedora rawhide one, or at developers), so being a bit more verbose is likely ok.

We haven't enabled it yet. Dave hit issues with it early in the merge window and we left it off. That being said, it's something we'll look at again soon and having it be a bit more verbose wouldn't be horrible.

josh

#42 lore raw
In reply to Linus Torvalds
Quoted 11 lines · Linus Torvalds
Quoted 4 lines · Greg Kroah-Hartman

It's going to make things really noisy at boot time, but then it should settle down and not be bad at all. Let's try it and see if it helps or not.

Yeah. And quite frankly, normally that whole DEBUG_KOBJECT_RELEASE thing is hopefully only enabled in debug kernels (like maybe the Fedora rawhide one, or at developers), so being a bit more verbose is likely ok.

We haven't enabled it yet. Dave hit issues with it early in the merge window and we left it off. That being said, it's something we'll look at again soon and having it be a bit more verbose wouldn't be horrible.

josh

#43 lore raw
In reply to Greg Kroah-Hartman
Quoted 4 lines · Greg Kroah-Hartman

It's going to make things really noisy at boot time, but then it should settle down and not be bad at all. Let's try it and see if it helps or not.

Yeah. And quite frankly, normally that whole DEBUG_KOBJECT_RELEASE thing is hopefully only enabled in debug kernels (like maybe the Fedora rawhide one, or at developers), so being a bit more verbose is likely ok.

Linus

#44 lore raw
In reply to Greg Kroah-Hartman
Quoted 11 lines · Greg KH
Quoted 10 lines · Russell King - ARM Linux
Quoted 9 lines · Fengguang Wu

I find the above debug messages very helpful in locating the buggy driver. How about enabling it whenever CONFIG_DEBUG_KOBJECT_RELEASE is enabled? Something like

#ifdef CONFIG_DEBUG_KOBJECT_RELEASE

(quoted diff) +1 -1
-       pr_debug("kobject: '%s' (%p): %s, parent %p (delayed)\n",
+       printk(KERN_INFO "kobject: '%s' (%p): %s, parent %p (delayed)\n",
                 kobject_name(kobj), kobj, __func__, kobj->parent);
Quoted 5 lines
Quoted 5 lines
Quoted 2 lines

pr_debug() won't be displayed by default, and it depends on CONFIG_DYNAMIC_DEBUG.

Please consider using pr_info() instead of printk(KERN_INFO - it's slightly less typing.

Good suggestion!

Quoted 7 lines
Quoted 4 lines

I can see that being a useful change while we have these problematical instances to track down, but I do wonder whether it'll make the thing too noisy. Does anyone have other opinions on this point? Linus? Greg?

It's going to make things really noisy at boot time, but then it should settle down and not be bad at all.

FYI, in the randconfig kernel involved in this thread, it will emit about 20 lines of dmesg.

Quoted 1 line

Let's try it and see if it helps or not.

OK, I'll submit a patch. These messages would allow me to do a statistic analyze of similar bugs: since I'm testing 100+ new randconfigs every day, some of them will include the buggy drivers and some not, we can collect all these lines

[    2.929669] kobject: 'drm' (ffff880006db2848): kobject_release, parent ffff880000189648 (delayed)
...
[    3.750200] kobject: 'mc13783-adc' (ffff880007707000): kobject_release, parent ffff880000189248 (delayed)

, count how many times each one shows up in the GOOD kernel boots and how many show up in the BAD boots. Then we may be able to learn which drivers are likely buggy and should be manually checked.

Thanks,
Fengguang

#45 lore raw
In reply to Greg Kroah-Hartman
Quoted 11 lines · Greg KH
Quoted 10 lines · Russell King - ARM Linux
Quoted 9 lines · Fengguang Wu

I find the above debug messages very helpful in locating the buggy driver. How about enabling it whenever CONFIG_DEBUG_KOBJECT_RELEASE is enabled? Something like

#ifdef CONFIG_DEBUG_KOBJECT_RELEASE

(quoted diff) +1 -1
-       pr_debug("kobject: '%s' (%p): %s, parent %p (delayed)\n",
+       printk(KERN_INFO "kobject: '%s' (%p): %s, parent %p (delayed)\n",
                 kobject_name(kobj), kobj, __func__, kobj->parent);
Quoted 5 lines
Quoted 5 lines
Quoted 2 lines

pr_debug() won't be displayed by default, and it depends on CONFIG_DYNAMIC_DEBUG.

Please consider using pr_info() instead of printk(KERN_INFO - it's slightly less typing.

Good suggestion!

Quoted 7 lines
Quoted 4 lines

I can see that being a useful change while we have these problematical instances to track down, but I do wonder whether it'll make the thing too noisy. Does anyone have other opinions on this point? Linus? Greg?

It's going to make things really noisy at boot time, but then it should settle down and not be bad at all.

FYI, in the randconfig kernel involved in this thread, it will emit about 20 lines of dmesg.

Quoted 1 line

Let's try it and see if it helps or not.

OK, I'll submit a patch. These messages would allow me to do a statistic analyze of similar bugs: since I'm testing 100+ new randconfigs every day, some of them will include the buggy drivers and some not, we can collect all these lines

[    2.929669] kobject: 'drm' (ffff880006db2848): kobject_release, parent ffff880000189648 (delayed)
...
[    3.750200] kobject: 'mc13783-adc' (ffff880007707000): kobject_release, parent ffff880000189248 (delayed)

, count how many times each one shows up in the GOOD kernel boots and how many show up in the BAD boots. Then we may be able to learn which drivers are likely buggy and should be manually checked.

Thanks,
Fengguang

#46 lore raw
In reply to Russell King - ARM Linux
Quoted 13 lines · Russell King - ARM Linux
Quoted 11 lines · Fengguang Wu

I find the above debug messages very helpful in locating the buggy driver. How about enabling it whenever CONFIG_DEBUG_KOBJECT_RELEASE is enabled? Something like

#ifdef CONFIG_DEBUG_KOBJECT_RELEASE

(quoted diff) +1 -1
-       pr_debug("kobject: '%s' (%p): %s, parent %p (delayed)\n",
+       printk(KERN_INFO "kobject: '%s' (%p): %s, parent %p (delayed)\n",
                 kobject_name(kobj), kobj, __func__, kobj->parent);

pr_debug() won't be displayed by default, and it depends on CONFIG_DYNAMIC_DEBUG.

Quoted 7 lines

Please consider using pr_info() instead of printk(KERN_INFO - it's slightly less typing.

I can see that being a useful change while we have these problematical instances to track down, but I do wonder whether it'll make the thing too noisy. Does anyone have other opinions on this point? Linus? Greg?

It's going to make things really noisy at boot time, but then it should settle down and not be bad at all. Let's try it and see if it helps or not.

thanks,

greg k-h

#47 lore raw
In reply to Linus Torvalds
Quoted 10 lines · Linus Torvalds
Quoted 7 lines · Fengguang Wu

I got a call trace containing parport_pc_probe_port() (is it the culprit?) after recompiling kernel with

CONFIG_DEBUG_OBJECTS_TIMERS=y

and booting with "ignore_loglevel". Here is the log for two kernel boots.

Ok, so it's definitely parport_pc. I don't see what it would do wrong, though.

Yeah, I see no timer usage in parport_pc driver, so it's still questionable.

I'm now trying to disable all drivers shows up in the kobject_release messages:

[    2.756392] kobject: 'ipmi_si' (ffff880007764a00): kobject_release, parent ffff8800001b7648 (delayed)
[    2.758091] kobject: 'ipmi_si' (ffff880007764800): kobject_release, parent ffff880000221248 (delayed)
[    2.759858] kobject: 'ipmi_si' (ffff880007764c00): kobject_release, parent ffff880000189248 (delayed)
[    2.929669] kobject: 'drm' (ffff880006db2848): kobject_release, parent ffff880000189648 (delayed)
[    2.932143] kobject: 'drm' (ffff880006daf000): kobject_release, parent           (null) (delayed)
[    2.941844] kobject: 'controlD64' (ffff880006db2020): kobject_release, parent           (null) (delayed)
[    2.958432] kobject: 'parport_pc.956' (ffff880006db2020): kobject_release, parent           (null) (delayed)
[    2.965698] kobject: 'parport_pc.888' (ffff880006dc5820): kobject_release, parent           (null) (delayed)
[    2.972583] kobject: 'parport_pc.632' (ffff880006dc5020): kobject_release, parent           (null) (delayed)
[    3.031704] kobject: 'physmap-flash' (ffff880006ddc800): kobject_release, parent ffff880000189248 (delayed)
[    3.055119] kobject: 'docg3' (ffff880006de3c00): kobject_release, parent ffff880000189248 (delayed)
[    3.496256] kobject: 'gpio-vbus' (ffff880006817400): kobject_release, parent ffff880000189248 (delayed)
[    3.619023] kobject: '(null)' (ffff88000777baf0): kobject_release, parent           (null) (delayed)
[    3.657587] kobject: 'proc-osm' (ffff88000684be00): kobject_release, parent ffff880006849848 (delayed)
[    3.662546] kobject: 'mc13xxx-rtc' (ffff880006851e00): kobject_release, parent ffff880000189248 (delayed)
[    3.669144] kobject: 'rtc-msm6242' (ffff880006851c00): kobject_release, parent ffff880000189248 (delayed)
[    3.677494] kobject: 'pcap-rtc' (ffff880006851a00): kobject_release, parent ffff880000189248 (delayed)
[    3.680280] kobject: 'rtc-rp5c01' (ffff880006855a00): kobject_release, parent ffff880000189248 (delayed)
[    3.750200] kobject: 'mc13783-adc' (ffff880007707000): kobject_release, parent ffff880000189248 (delayed)

with some manual bisects, I find a good config (attached) that can reliably boot the kernel up.

Based on that config, I tried adding parport_pc and see that it still boots fine.

Adding drm, however will bring back the oops. Will try a kernel based on the original kconfig with drm disabled only.

Thanks,
Fengguang

#
# Automatically generated file; DO NOT EDIT.
# Linux/x86_64 3.11.0-rc2 Kernel Configuration
#
CONFIG_64BIT=y
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_ARCH_HAS_CPU_AUTOPROBE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ZONE_DMA32=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_X86_64_SMP=y
CONFIG_X86_HT=y
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11" CONFIG_ARCH_CPU_PROBE_RELEASE=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y

#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
CONFIG_COMPILE_TEST=y
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
# CONFIG_SYSVIPC is not set
CONFIG_POSIX_MQUEUE=y
# CONFIG_FHANDLE is not set
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_WATCH=y
CONFIG_AUDIT_TREE=y
# CONFIG_AUDIT_LOGINUID_IMMUTABLE is not set
CONFIG_HAVE_GENERIC_HARDIRQS=y

#
# IRQ subsystem
#
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_DEBUG=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y

#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
# CONFIG_NO_HZ_FULL is not set
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y

#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
# CONFIG_IRQ_TIME_ACCOUNTING is not set
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y

#
# RCU Subsystem
#
CONFIG_TREE_PREEMPT_RCU=y
CONFIG_PREEMPT_RCU=y
CONFIG_RCU_STALL_COMMON=y
# CONFIG_RCU_USER_QS is not set
CONFIG_RCU_FANOUT=64
CONFIG_RCU_FANOUT_LEAF=16
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_RCU_FAST_NO_HZ is not set
CONFIG_TREE_RCU_TRACE=y
# CONFIG_RCU_BOOST is not set
CONFIG_RCU_NOCB_CPU=y
CONFIG_RCU_NOCB_CPU_NONE=y
# CONFIG_RCU_NOCB_CPU_ZERO is not set
# CONFIG_RCU_NOCB_CPU_ALL is not set
CONFIG_IKCONFIG=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_ARCH_WANTS_PROT_NUMA_PROT_NONE=y
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
# CONFIG_CGROUP_FREEZER is not set
CONFIG_CGROUP_DEVICE=y
CONFIG_CPUSETS=y
# CONFIG_PROC_PID_CPUSET is not set
# CONFIG_CGROUP_CPUACCT is not set
# CONFIG_RESOURCE_COUNTERS is not set
CONFIG_CGROUP_PERF=y
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_CFS_BANDWIDTH=y
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_CHECKPOINT_RESTORE=y
# CONFIG_NAMESPACES is not set
CONFIG_UIDGID_CONVERTED=y
# CONFIG_UIDGID_STRICT_TYPE_CHECKS is not set
CONFIG_SCHED_AUTOGROUP=y
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
# CONFIG_RD_XZ is not set
# CONFIG_RD_LZO is not set
# CONFIG_RD_LZ4 is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_ANON_INODES=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_EXPERT=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_PRINTK=y
CONFIG_BUG=y
# CONFIG_PCSPKR_PLATFORM is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_PCI_QUIRKS=y
CONFIG_EMBEDDED=y
CONFIG_HAVE_PERF_EVENTS=y

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
# CONFIG_JUMP_LABEL is not set
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_SOFT_DIRTY=y
CONFIG_MODULES_USE_ELF_RELA=y

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_STOP_MACHINE=y
# CONFIG_BLOCK is not set
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_PADATA=y
CONFIG_ASN1=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
# CONFIG_FREEZER is not set

#
# Processor type and features
#
# CONFIG_ZONE_DMA is not set
CONFIG_SMP=y
CONFIG_X86_MPPARSE=y
# CONFIG_X86_EXTENDED_PLATFORM is not set
# CONFIG_X86_INTEL_LPSS is not set
# CONFIG_SCHED_OMIT_FRAME_POINTER is not set
CONFIG_HYPERVISOR_GUEST=y
CONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_DEBUG is not set
# CONFIG_PARAVIRT_SPINLOCKS is not set
# CONFIG_XEN is not set
# CONFIG_XEN_PRIVILEGED_GUEST is not set
CONFIG_KVM_GUEST=y
# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set
CONFIG_PARAVIRT_CLOCK=y
CONFIG_NO_BOOTMEM=y
CONFIG_MEMTEST=y
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
# CONFIG_PROCESSOR_SELECT is not set
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_HPET_TIMER=y
# CONFIG_DMI is not set
# CONFIG_GART_IOMMU is not set
CONFIG_CALGARY_IOMMU=y
CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT=y
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
CONFIG_MAXSMP=y
CONFIG_NR_CPUS=4096
# CONFIG_SCHED_SMT is not set
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_COUNT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
# CONFIG_X86_MCE is not set
CONFIG_I8K=y
CONFIG_MICROCODE=y
# CONFIG_MICROCODE_INTEL is not set
# CONFIG_MICROCODE_AMD is not set
CONFIG_MICROCODE_OLD_INTERFACE=y
# CONFIG_MICROCODE_INTEL_EARLY is not set
# CONFIG_MICROCODE_AMD_EARLY is not set
CONFIG_MICROCODE_EARLY=y
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_DIRECT_GBPAGES=y
# CONFIG_NUMA is not set
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
# CONFIG_SPARSEMEM_VMEMMAP is not set
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=999999
# CONFIG_COMPACTION is not set
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
# CONFIG_TRANSPARENT_HUGEPAGE is not set
CONFIG_CROSS_MEMORY_ATTACH=y
# CONFIG_CLEANCACHE is not set
# CONFIG_ZBUD is not set
CONFIG_MEM_SOFT_DIRTY=y
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_X86_RESERVE_LOW=64
# CONFIG_MTRR is not set
# CONFIG_ARCH_RANDOM is not set
CONFIG_X86_SMAP=y
# CONFIG_EFI is not set
# CONFIG_SECCOMP is not set
CONFIG_CC_STACKPROTECTOR=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_SCHED_HRTICK=y
# CONFIG_KEXEC is not set
CONFIG_CRASH_DUMP=y
CONFIG_PHYSICAL_START=0x1000000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_HOTPLUG_CPU=y
CONFIG_BOOTPARAM_HOTPLUG_CPU0=y
# CONFIG_DEBUG_HOTPLUG_CPU0 is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y

#
# Power management and ACPI options
#
# CONFIG_SUSPEND is not set
CONFIG_PM_RUNTIME=y
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_ADVANCED_DEBUG is not set
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
CONFIG_ACPI=y
# CONFIG_ACPI_EC_DEBUGFS is not set
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=y
CONFIG_ACPI_FAN=y
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_I2C=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
# CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_CUSTOM_DSDT_FILE=""
# CONFIG_ACPI_CUSTOM_DSDT is not set
# CONFIG_ACPI_INITRD_TABLE_OVERRIDE is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_PCI_SLOT is not set
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
# CONFIG_ACPI_SBS is not set
# CONFIG_ACPI_HED is not set
# CONFIG_ACPI_CUSTOM_METHOD is not set
# CONFIG_ACPI_APEI is not set
# CONFIG_SFI is not set

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y CONFIG_CPU_FREQ_GOV_COMMON=y CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_POWERSAVE=y
# CONFIG_CPU_FREQ_GOV_USERSPACE is not set CONFIG_CPU_FREQ_GOV_ONDEMAND=y CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y

#

# x86 CPU frequency scaling drivers
#
# CONFIG_X86_INTEL_PSTATE is not set
# CONFIG_X86_PCC_CPUFREQ is not set
# CONFIG_X86_ACPI_CPUFREQ is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_P4_CLOCKMOD is not set

#

# shared options
#
# CONFIG_X86_SPEEDSTEP_LIB is not set
CONFIG_CPU_IDLE=y
# CONFIG_CPU_IDLE_MULTIPLE_DRIVERS is not set
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
# CONFIG_INTEL_IDLE is not set

#
# Memory power savings
#
CONFIG_I7300_IDLE_IOAT_CHANNEL=y
CONFIG_I7300_IDLE=y

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
# CONFIG_PCI_MMCONFIG is not set
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_CNB20LE_QUIRK is not set
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
# CONFIG_PCIE_ECRC is not set
CONFIG_PCIEAER_INJECT=y
CONFIG_PCIEASPM=y
CONFIG_PCIEASPM_DEBUG=y
# CONFIG_PCIEASPM_DEFAULT is not set
CONFIG_PCIEASPM_POWERSAVE=y
# CONFIG_PCIEASPM_PERFORMANCE is not set
CONFIG_PCIE_PME=y
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_DEBUG is not set
CONFIG_PCI_REALLOC_ENABLE_AUTO=y
# CONFIG_PCI_STUB is not set
CONFIG_HT_IRQ=y
# CONFIG_PCI_IOV is not set
# CONFIG_PCI_PRI is not set
# CONFIG_PCI_PASID is not set
# CONFIG_PCI_IOAPIC is not set
CONFIG_PCI_LABEL=y

#
# PCI host controller drivers
#
# CONFIG_ISA_DMA_API is not set
CONFIG_AMD_NB=y
CONFIG_PCCARD=y
CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_CARDBUS=y

#
# PC-card bridges
#
# CONFIG_YENTA is not set
CONFIG_PD6729=y
# CONFIG_I82092 is not set
CONFIG_PCCARD_NONSTATIC=y
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_RAPIDIO is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
CONFIG_BINFMT_SCRIPT=y
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_COREDUMP is not set
# CONFIG_IA32_EMULATION is not set
CONFIG_HAVE_TEXT_POKE_SMP=y
CONFIG_X86_DEV_DMA_OPS=y
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_DIAG is not set
CONFIG_UNIX=y
# CONFIG_UNIX_DIAG is not set
CONFIG_XFRM=y
CONFIG_XFRM_ALGO=y
# CONFIG_XFRM_USER is not set
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
# CONFIG_IP_FIB_TRIE_STATS is not set
# CONFIG_IP_MULTIPLE_TABLES is not set
# CONFIG_IP_ROUTE_MULTIPATH is not set
# CONFIG_IP_ROUTE_VERBOSE is not set
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_IP_PNP_RARP is not set
CONFIG_NET_IPIP=y
CONFIG_NET_IPGRE_DEMUX=y
CONFIG_NET_IP_TUNNEL=y
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_NET_IPVTI=y
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
CONFIG_INET_TUNNEL=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
CONFIG_INET_UDP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
CONFIG_NETWORK_SECMARK=y
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
CONFIG_IP_SCTP=y
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5 is not set
CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1=y
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set
CONFIG_SCTP_COOKIE_HMAC_MD5=y
CONFIG_SCTP_COOKIE_HMAC_SHA1=y
CONFIG_RDS=y
# CONFIG_RDS_TCP is not set
CONFIG_RDS_DEBUG=y
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
CONFIG_L2TP=y
# CONFIG_L2TP_DEBUGFS is not set
# CONFIG_L2TP_V3 is not set
CONFIG_STP=y
CONFIG_GARP=y
CONFIG_BRIDGE=y
# CONFIG_BRIDGE_IGMP_SNOOPING is not set
# CONFIG_BRIDGE_VLAN_FILTERING is not set
CONFIG_VLAN_8021Q=y
CONFIG_VLAN_8021Q_GVRP=y
# CONFIG_VLAN_8021Q_MVRP is not set
CONFIG_DECNET=y
CONFIG_DECNET_ROUTER=y
CONFIG_LLC=y
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
CONFIG_X25=y
CONFIG_LAPB=y
CONFIG_PHONET=y
CONFIG_IEEE802154=y
# CONFIG_MAC802154 is not set
# CONFIG_NET_SCHED is not set
CONFIG_DCB=y
CONFIG_DNS_RESOLVER=y
# CONFIG_BATMAN_ADV is not set
# CONFIG_OPENVSWITCH is not set
# CONFIG_VSOCKETS is not set
CONFIG_NETLINK_MMAP=y
# CONFIG_NETLINK_DIAG is not set
CONFIG_NET_MPLS_GSO=y
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
CONFIG_NETPRIO_CGROUP=y
CONFIG_NET_LL_RX_POLL=y
CONFIG_BQL=y
CONFIG_NET_FLOW_LIMIT=y

#
# Network testing
#
CONFIG_HAMRADIO=y

#
# Packet Radio protocols
#
# CONFIG_AX25 is not set
# CONFIG_CAN is not set
CONFIG_IRDA=y

#
# IrDA protocols
#
CONFIG_IRLAN=y
# CONFIG_IRCOMM is not set
CONFIG_IRDA_ULTRA=y

#
# IrDA options
#
# CONFIG_IRDA_CACHE_LAST_LSAP is not set
# CONFIG_IRDA_FAST_RR is not set
# CONFIG_IRDA_DEBUG is not set

#
# Infrared-port device drivers
#

#
# SIR device drivers
#
# CONFIG_IRTTY_SIR is not set

#
# Dongle support
#
CONFIG_KINGSUN_DONGLE=y
CONFIG_KSDAZZLE_DONGLE=y
CONFIG_KS959_DONGLE=y

#
# FIR device drivers
#
CONFIG_USB_IRDA=y
CONFIG_SIGMATEL_FIR=y
CONFIG_VLSI_FIR=y
CONFIG_MCS_FIR=y
# CONFIG_BT is not set
CONFIG_AF_RXRPC=y
CONFIG_AF_RXRPC_DEBUG=y
CONFIG_RXKAD=y
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_CFG80211=y
CONFIG_NL80211_TESTMODE=y
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_REG_DEBUG is not set
CONFIG_CFG80211_CERTIFICATION_ONUS=y
# CONFIG_CFG80211_DEFAULT_PS is not set
CONFIG_CFG80211_DEBUGFS=y
# CONFIG_CFG80211_INTERNAL_REGDB is not set
# CONFIG_CFG80211_WEXT is not set
# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
CONFIG_WIMAX=y
CONFIG_WIMAX_DEBUG_LEVEL=8
CONFIG_RFKILL=y
CONFIG_RFKILL_LEDS=y
# CONFIG_RFKILL_INPUT is not set
# CONFIG_RFKILL_REGULATOR is not set
# CONFIG_NET_9P is not set
CONFIG_CAIF=y
CONFIG_CAIF_DEBUG=y
CONFIG_CAIF_NETDEV=y
CONFIG_CAIF_USB=y
CONFIG_CEPH_LIB=y
# CONFIG_CEPH_LIB_PRETTYDEBUG is not set
# CONFIG_CEPH_LIB_USE_DNS_RESOLVER is not set
CONFIG_NFC=y
CONFIG_NFC_NCI=y
CONFIG_NFC_NCI_SPI=y
CONFIG_NFC_HCI=y
CONFIG_NFC_SHDLC=y

#
# Near Field Communication (NFC) devices
#
CONFIG_NFC_PN533=y
# CONFIG_NFC_SIM is not set
CONFIG_NFC_PN544=y
CONFIG_NFC_PN544_I2C=y
CONFIG_NFC_MICROREAD=y
# CONFIG_NFC_MICROREAD_I2C is not set
CONFIG_HAVE_BPF_JIT=y

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
# CONFIG_DEVTMPFS_MOUNT is not set
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
# CONFIG_DEBUG_DRIVER is not set
CONFIG_DEBUG_DEVRES=y
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_SPI=y
CONFIG_REGMAP_MMIO=y
CONFIG_REGMAP_IRQ=y
# CONFIG_DMA_SHARED_BUFFER is not set

#
# Bus devices
#
CONFIG_CONNECTOR=y
# CONFIG_PROC_EVENTS is not set
CONFIG_MTD=y
CONFIG_MTD_REDBOOT_PARTS=y
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
CONFIG_MTD_REDBOOT_PARTS_READONLY=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_AR7_PARTS=y

#
# User Modules And Translation Layers
#
CONFIG_MTD_OOPS=y

#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
CONFIG_MTD_GEN_PROBE=y
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_CFI_STAA=y
CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_RAM=y
CONFIG_MTD_ROM=y
CONFIG_MTD_ABSENT=y

#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
# CONFIG_MTD_PHYSMAP is not set
CONFIG_MTD_SC520CDP=y
# CONFIG_MTD_NETSC520 is not set
CONFIG_MTD_TS5500=y
CONFIG_MTD_SBC_GXX=y
CONFIG_MTD_AMD76XROM=y
# CONFIG_MTD_ICHXROM is not set
CONFIG_MTD_ESB2ROM=y
# CONFIG_MTD_CK804XROM is not set
CONFIG_MTD_SCB2_FLASH=y
# CONFIG_MTD_NETtel is not set
# CONFIG_MTD_L440GX is not set
# CONFIG_MTD_PCI is not set
# CONFIG_MTD_PCMCIA is not set
CONFIG_MTD_GPIO_ADDR=y
CONFIG_MTD_INTEL_VR_NOR=y
CONFIG_MTD_PLATRAM=y
CONFIG_MTD_LATCH_ADDR=y

#
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
# CONFIG_MTD_DATAFLASH is not set
CONFIG_MTD_M25P80=y
# CONFIG_M25PXX_USE_FAST_READ is not set
CONFIG_MTD_SST25L=y
CONFIG_MTD_SLRAM=y
CONFIG_MTD_PHRAM=y
# CONFIG_MTD_MTDRAM is not set

#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOCG3 is not set
CONFIG_MTD_NAND_ECC=y
# CONFIG_MTD_NAND_ECC_SMC is not set
CONFIG_MTD_NAND=y
# CONFIG_MTD_NAND_ECC_BCH is not set
# CONFIG_MTD_SM_COMMON is not set
CONFIG_MTD_NAND_DENALI=y
# CONFIG_MTD_NAND_DENALI_PCI is not set
CONFIG_MTD_NAND_IDS=y
# CONFIG_MTD_NAND_RICOH is not set
CONFIG_MTD_NAND_DISKONCHIP=y
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y
CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
# CONFIG_MTD_NAND_DOCG4 is not set
CONFIG_MTD_NAND_CAFE=y
CONFIG_MTD_NAND_NANDSIM=y
# CONFIG_MTD_NAND_PLATFORM is not set
# CONFIG_MTD_ALAUDA is not set
CONFIG_MTD_ONENAND=y
# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
# CONFIG_MTD_ONENAND_GENERIC is not set
# CONFIG_MTD_ONENAND_OTP is not set
CONFIG_MTD_ONENAND_2X_PROGRAM=y

#
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
# CONFIG_MTD_UBI is not set
# CONFIG_PARPORT is not set
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y

#
# Protocols
#
CONFIG_PNPACPI=y

#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=y
# CONFIG_AD525X_DPOT is not set
CONFIG_DUMMY_IRQ=y
CONFIG_IBM_ASM=y
CONFIG_PHANTOM=y
# CONFIG_INTEL_MID_PTI is not set
# CONFIG_SGI_IOC4 is not set
CONFIG_TIFM_CORE=y
CONFIG_TIFM_7XX1=y
CONFIG_ICS932S401=y
CONFIG_ATMEL_SSC=y
CONFIG_ENCLOSURE_SERVICES=y
CONFIG_CS5535_MFGPT=y
CONFIG_CS5535_MFGPT_DEFAULT_IRQ=7
# CONFIG_CS5535_CLOCK_EVENT_SRC is not set
CONFIG_HP_ILO=y
CONFIG_APDS9802ALS=y
CONFIG_ISL29003=y
CONFIG_ISL29020=y
CONFIG_SENSORS_TSL2550=y
CONFIG_SENSORS_BH1780=y
CONFIG_SENSORS_BH1770=y
# CONFIG_SENSORS_APDS990X is not set
CONFIG_HMC6352=y
# CONFIG_DS1682 is not set
CONFIG_TI_DAC7512=y
CONFIG_VMWARE_BALLOON=y
# CONFIG_BMP085_I2C is not set
# CONFIG_BMP085_SPI is not set
CONFIG_PCH_PHUB=y
CONFIG_USB_SWITCH_FSA9480=y
CONFIG_LATTICE_ECP3_CONFIG=y
# CONFIG_SRAM is not set
CONFIG_C2PORT=y
CONFIG_C2PORT_DURAMAR_2150=y

#
# EEPROM support
#
CONFIG_EEPROM_AT24=y
CONFIG_EEPROM_AT25=y
CONFIG_EEPROM_LEGACY=y
# CONFIG_EEPROM_MAX6875 is not set
CONFIG_EEPROM_93CX6=y
CONFIG_EEPROM_93XX46=y
CONFIG_CB710_CORE=y
# CONFIG_CB710_DEBUG is not set
CONFIG_CB710_DEBUG_ASSUMPTIONS=y

#
# Texas Instruments shared transport line discipline #
# CONFIG_TI_ST is not set CONFIG_SENSORS_LIS3_I2C=y

#
# Altera FPGA firmware download module
#
CONFIG_ALTERA_STAPL=y
CONFIG_VMWARE_VMCI=y
CONFIG_HAVE_IDE=y

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_SCSI_DMA is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
CONFIG_FIREWIRE_NOSY=y
CONFIG_I2O=y
CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
CONFIG_I2O_EXT_ADAPTEC=y
CONFIG_I2O_EXT_ADAPTEC_DMA64=y
CONFIG_I2O_CONFIG=y
# CONFIG_I2O_CONFIG_OLD_IOCTL is not set
# CONFIG_I2O_BUS is not set
# CONFIG_I2O_PROC is not set
# CONFIG_MACINTOSH_DRIVERS is not set
# CONFIG_NETDEVICES is not set
# CONFIG_VHOST_NET is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=y
CONFIG_INPUT_SPARSEKMAP=y
# CONFIG_INPUT_MATRIXKMAP is not set

#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
CONFIG_INPUT_JOYDEV=y
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5520 is not set
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_GPIO_POLLED is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_STMPE is not set
# CONFIG_KEYBOARD_TC3589X is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_CYPRESS=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_SENTELIC is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
CONFIG_MOUSE_BCM5974=y
CONFIG_MOUSE_CYAPA=y
CONFIG_MOUSE_VSXXXAA=y
# CONFIG_MOUSE_GPIO is not set
CONFIG_MOUSE_SYNAPTICS_I2C=y
# CONFIG_MOUSE_SYNAPTICS_USB is not set
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=y
# CONFIG_JOYSTICK_A3D is not set
CONFIG_JOYSTICK_ADI=y
# CONFIG_JOYSTICK_COBRA is not set
CONFIG_JOYSTICK_GF2K=y
# CONFIG_JOYSTICK_GRIP is not set
CONFIG_JOYSTICK_GRIP_MP=y
# CONFIG_JOYSTICK_GUILLEMOT is not set
CONFIG_JOYSTICK_INTERACT=y
CONFIG_JOYSTICK_SIDEWINDER=y
# CONFIG_JOYSTICK_TMDC is not set
CONFIG_JOYSTICK_IFORCE=y
CONFIG_JOYSTICK_IFORCE_USB=y
# CONFIG_JOYSTICK_IFORCE_232 is not set
# CONFIG_JOYSTICK_WARRIOR is not set
CONFIG_JOYSTICK_MAGELLAN=y
CONFIG_JOYSTICK_SPACEORB=y
CONFIG_JOYSTICK_SPACEBALL=y
CONFIG_JOYSTICK_STINGER=y
CONFIG_JOYSTICK_TWIDJOY=y
CONFIG_JOYSTICK_ZHENHUA=y
CONFIG_JOYSTICK_AS5011=y
CONFIG_JOYSTICK_JOYDUMP=y
# CONFIG_JOYSTICK_XPAD is not set
# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=y
CONFIG_TOUCHSCREEN_AD7877=y
# CONFIG_TOUCHSCREEN_AD7879 is not set
CONFIG_TOUCHSCREEN_ATMEL_MXT=y
CONFIG_TOUCHSCREEN_AUO_PIXCIR=y
CONFIG_TOUCHSCREEN_BU21013=y
# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
CONFIG_TOUCHSCREEN_CYTTSP_CORE=y
# CONFIG_TOUCHSCREEN_CYTTSP_I2C is not set
# CONFIG_TOUCHSCREEN_CYTTSP_SPI is not set
# CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set
CONFIG_TOUCHSCREEN_DA9052=y
CONFIG_TOUCHSCREEN_DYNAPRO=y
CONFIG_TOUCHSCREEN_HAMPSHIRE=y
CONFIG_TOUCHSCREEN_EETI=y
# CONFIG_TOUCHSCREEN_FUJITSU is not set
CONFIG_TOUCHSCREEN_ILI210X=y
# CONFIG_TOUCHSCREEN_GUNZE is not set
CONFIG_TOUCHSCREEN_ELO=y
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
CONFIG_TOUCHSCREEN_WACOM_I2C=y
CONFIG_TOUCHSCREEN_MAX11801=y
CONFIG_TOUCHSCREEN_MCS5000=y
# CONFIG_TOUCHSCREEN_MMS114 is not set
CONFIG_TOUCHSCREEN_MTOUCH=y
CONFIG_TOUCHSCREEN_INEXIO=y
# CONFIG_TOUCHSCREEN_MK712 is not set
CONFIG_TOUCHSCREEN_PENMOUNT=y
CONFIG_TOUCHSCREEN_EDT_FT5X06=y
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
CONFIG_TOUCHSCREEN_TOUCHWIN=y
# CONFIG_TOUCHSCREEN_PIXCIR is not set
# CONFIG_TOUCHSCREEN_WM831X is not set
CONFIG_TOUCHSCREEN_USB_COMPOSITE=y
# CONFIG_TOUCHSCREEN_USB_EGALAX is not set
# CONFIG_TOUCHSCREEN_USB_PANJIT is not set
# CONFIG_TOUCHSCREEN_USB_3M is not set
CONFIG_TOUCHSCREEN_USB_ITM=y
# CONFIG_TOUCHSCREEN_USB_ETURBO is not set
CONFIG_TOUCHSCREEN_USB_GUNZE=y
CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
# CONFIG_TOUCHSCREEN_USB_IRTOUCH is not set
CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
# CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH is not set
# CONFIG_TOUCHSCREEN_USB_GOTOP is not set
CONFIG_TOUCHSCREEN_USB_JASTEC=y
# CONFIG_TOUCHSCREEN_USB_ELO is not set
CONFIG_TOUCHSCREEN_USB_E2I=y
# CONFIG_TOUCHSCREEN_USB_ZYTRONIC is not set
# CONFIG_TOUCHSCREEN_USB_ETT_TC45USB is not set
# CONFIG_TOUCHSCREEN_USB_NEXIO is not set
CONFIG_TOUCHSCREEN_USB_EASYTOUCH=y
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TSC_SERIO is not set
CONFIG_TOUCHSCREEN_TSC2005=y
CONFIG_TOUCHSCREEN_TSC2007=y
CONFIG_TOUCHSCREEN_PCAP=y
# CONFIG_TOUCHSCREEN_ST1232 is not set
# CONFIG_TOUCHSCREEN_STMPE is not set
CONFIG_TOUCHSCREEN_TPS6507X=y
CONFIG_INPUT_MISC=y
CONFIG_INPUT_AD714X=y
CONFIG_INPUT_AD714X_I2C=y
# CONFIG_INPUT_AD714X_SPI is not set
CONFIG_INPUT_BMA150=y
# CONFIG_INPUT_MMA8450 is not set
CONFIG_INPUT_MPU3050=y
CONFIG_INPUT_APANEL=y
CONFIG_INPUT_GP2A=y
# CONFIG_INPUT_GPIO_TILT_POLLED is not set
# CONFIG_INPUT_ATLAS_BTNS is not set
CONFIG_INPUT_ATI_REMOTE2=y
CONFIG_INPUT_KEYSPAN_REMOTE=y
CONFIG_INPUT_KXTJ9=y
CONFIG_INPUT_KXTJ9_POLLED_MODE=y
# CONFIG_INPUT_POWERMATE is not set
CONFIG_INPUT_YEALINK=y
CONFIG_INPUT_CM109=y
CONFIG_INPUT_RETU_PWRBUTTON=y
CONFIG_INPUT_TWL6040_VIBRA=y
CONFIG_INPUT_UINPUT=y
# CONFIG_INPUT_PCF50633_PMU is not set
# CONFIG_INPUT_PCF8574 is not set
CONFIG_INPUT_PWM_BEEPER=y
CONFIG_INPUT_GPIO_ROTARY_ENCODER=y
# CONFIG_INPUT_DA9052_ONKEY is not set
CONFIG_INPUT_WM831X_ON=y
CONFIG_INPUT_PCAP=y
CONFIG_INPUT_ADXL34X=y
CONFIG_INPUT_ADXL34X_I2C=y
# CONFIG_INPUT_ADXL34X_SPI is not set
# CONFIG_INPUT_IMS_PCU is not set
CONFIG_INPUT_CMA3000=y
# CONFIG_INPUT_CMA3000_I2C is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_CT82C710=y
CONFIG_SERIO_PCIPS2=y
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
CONFIG_SERIO_ALTERA_PS2=y
CONFIG_SERIO_PS2MULT=y
CONFIG_SERIO_ARC_PS2=y
CONFIG_GAMEPORT=y
CONFIG_GAMEPORT_NS558=y
CONFIG_GAMEPORT_L4=y
CONFIG_GAMEPORT_EMU10K1=y
# CONFIG_GAMEPORT_FM801 is not set

#
# Character devices
#
CONFIG_TTY=y
# CONFIG_VT is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
# CONFIG_N_GSM is not set
# CONFIG_TRACE_SINK is not set
# CONFIG_DEVKMEM is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
# CONFIG_SERIAL_8250_CS is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
# CONFIG_SERIAL_8250_DW is not set

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_MAX310X is not set
# CONFIG_SERIAL_MRST_MAX3110 is not set
# CONFIG_SERIAL_MFD_HSU is not set
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_IFX6X60 is not set
# CONFIG_SERIAL_PCH_UART is not set
# CONFIG_SERIAL_ARC is not set
# CONFIG_SERIAL_RP2 is not set
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_TTY_PRINTK is not set
# CONFIG_VIRTIO_CONSOLE is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
CONFIG_NVRAM=y
# CONFIG_R3964 is not set
CONFIG_APPLICOM=y

#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
CONFIG_CARDMAN_4000=y
# CONFIG_CARDMAN_4040 is not set
# CONFIG_MWAVE is not set
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
CONFIG_TCG_TPM=y
# CONFIG_TCG_TIS is not set
CONFIG_TCG_TIS_I2C_INFINEON=y
CONFIG_TCG_NSC=y
# CONFIG_TCG_ATMEL is not set
# CONFIG_TCG_INFINEON is not set
# CONFIG_TCG_ST33_I2C is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_COMPAT is not set
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MUX=y

#
# Multiplexer I2C Chip support
#
CONFIG_I2C_MUX_GPIO=y
# CONFIG_I2C_MUX_PCA9541 is not set
CONFIG_I2C_MUX_PCA954x=y
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=y
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCA=y

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
CONFIG_I2C_ALI1563=y
CONFIG_I2C_ALI15X3=y
# CONFIG_I2C_AMD756 is not set
CONFIG_I2C_AMD8111=y
CONFIG_I2C_I801=y
# CONFIG_I2C_ISCH is not set
CONFIG_I2C_ISMT=y
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
CONFIG_I2C_SIS5595=y
CONFIG_I2C_SIS630=y
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set

#
# ACPI drivers
#
# CONFIG_I2C_SCMI is not set

#
# I2C system bus drivers (mostly embedded / system-on-chip) #
CONFIG_I2C_CBUS_GPIO=y
# CONFIG_I2C_DESIGNWARE_PCI is not set CONFIG_I2C_EG20T=y
# CONFIG_I2C_GPIO is not set
CONFIG_I2C_KEMPLD=y
CONFIG_I2C_OCORES=y
CONFIG_I2C_PCA_PLATFORM=y
# CONFIG_I2C_PXA_PCI is not set CONFIG_I2C_SIMTEC=y
CONFIG_I2C_XILINX=y

#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_DIOLAN_U2C=y
CONFIG_I2C_PARPORT_LIGHT=y
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
# CONFIG_I2C_VIPERBOARD is not set

#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_SPI=y
CONFIG_SPI_DEBUG=y
CONFIG_SPI_MASTER=y

#
# SPI Master Controller Drivers
#
CONFIG_SPI_ALTERA=y
CONFIG_SPI_BITBANG=y
# CONFIG_SPI_GPIO is not set
CONFIG_SPI_OC_TINY=y
CONFIG_SPI_PXA2XX_DMA=y
CONFIG_SPI_PXA2XX=y
CONFIG_SPI_PXA2XX_PCI=y
CONFIG_SPI_SC18IS602=y
CONFIG_SPI_TOPCLIFF_PCH=y
CONFIG_SPI_XCOMM=y
CONFIG_SPI_XILINX=y
CONFIG_SPI_DESIGNWARE=y
CONFIG_SPI_DW_PCI=y

#
# SPI Protocol Masters
#
CONFIG_SPI_SPIDEV=y
CONFIG_SPI_TLE62X0=y
# CONFIG_HSI is not set

#
# PPS support
#
CONFIG_PPS=y
# CONFIG_PPS_DEBUG is not set

#
# PPS clients support
#
CONFIG_PPS_CLIENT_KTIMER=y
# CONFIG_PPS_CLIENT_LDISC is not set
CONFIG_PPS_CLIENT_GPIO=y

#
# PPS generators support
#

#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=y

#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks. #
CONFIG_PTP_1588_CLOCK_PCH=y CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIO_DEVRES=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_ACPI=y
# CONFIG_DEBUG_GPIO is not set
# CONFIG_GPIO_SYSFS is not set
CONFIG_GPIO_GENERIC=y
# CONFIG_GPIO_DA9052 is not set
CONFIG_GPIO_MAX730X=y

#
# Memory mapped GPIO drivers:
#
CONFIG_GPIO_GENERIC_PLATFORM=y
# CONFIG_GPIO_IT8761E is not set
CONFIG_GPIO_TS5500=y
CONFIG_GPIO_SCH=y
CONFIG_GPIO_ICH=y
CONFIG_GPIO_VX855=y
# CONFIG_GPIO_LYNXPOINT is not set

#
# I2C GPIO expanders:
#
CONFIG_GPIO_ARIZONA=y
# CONFIG_GPIO_MAX7300 is not set
CONFIG_GPIO_MAX732X=y
# CONFIG_GPIO_MAX732X_IRQ is not set
CONFIG_GPIO_PCA953X=y
CONFIG_GPIO_PCA953X_IRQ=y
CONFIG_GPIO_PCF857X=y
CONFIG_GPIO_RC5T583=y
# CONFIG_GPIO_SX150X is not set
CONFIG_GPIO_STMPE=y
CONFIG_GPIO_TC3589X=y
CONFIG_GPIO_TPS65912=y
CONFIG_GPIO_TWL6040=y
CONFIG_GPIO_WM831X=y
CONFIG_GPIO_WM8350=y
CONFIG_GPIO_WM8994=y
CONFIG_GPIO_ADP5520=y
# CONFIG_GPIO_ADP5588 is not set

#
# PCI GPIO expanders:
#
CONFIG_GPIO_CS5535=y
CONFIG_GPIO_BT8XX=y
CONFIG_GPIO_AMD8111=y
CONFIG_GPIO_LANGWELL=y
# CONFIG_GPIO_PCH is not set
CONFIG_GPIO_ML_IOH=y
CONFIG_GPIO_TIMBERDALE=y
CONFIG_GPIO_RDC321X=y

#
# SPI GPIO expanders:
#
CONFIG_GPIO_MAX7301=y
CONFIG_GPIO_MCP23S08=y
CONFIG_GPIO_MC33880=y
# CONFIG_GPIO_74X164 is not set

#
# AC97 GPIO expanders:
#

#
# MODULbus GPIO expanders:
#
CONFIG_GPIO_JANZ_TTL=y
# CONFIG_GPIO_TPS6586X is not set
CONFIG_GPIO_TPS65910=y

#
# USB GPIO expanders:
#
CONFIG_GPIO_VIPERBOARD=y
CONFIG_W1=y
# CONFIG_W1_CON is not set

#
# 1-wire Bus Masters
#
# CONFIG_W1_MASTER_MATROX is not set
CONFIG_W1_MASTER_DS2490=y
CONFIG_W1_MASTER_DS2482=y
CONFIG_W1_MASTER_DS1WM=y
CONFIG_W1_MASTER_GPIO=y

#
# 1-wire Slaves
#
# CONFIG_W1_SLAVE_THERM is not set
CONFIG_W1_SLAVE_SMEM=y
# CONFIG_W1_SLAVE_DS2408 is not set
CONFIG_W1_SLAVE_DS2413=y
CONFIG_W1_SLAVE_DS2423=y
CONFIG_W1_SLAVE_DS2431=y
CONFIG_W1_SLAVE_DS2433=y
# CONFIG_W1_SLAVE_DS2433_CRC is not set
# CONFIG_W1_SLAVE_DS2760 is not set
CONFIG_W1_SLAVE_DS2780=y
CONFIG_W1_SLAVE_DS2781=y
CONFIG_W1_SLAVE_DS28E04=y
CONFIG_W1_SLAVE_BQ27000=y
CONFIG_POWER_SUPPLY=y
CONFIG_POWER_SUPPLY_DEBUG=y
# CONFIG_PDA_POWER is not set
CONFIG_GENERIC_ADC_BATTERY=y
CONFIG_WM831X_BACKUP=y
CONFIG_WM831X_POWER=y
CONFIG_WM8350_POWER=y
CONFIG_TEST_POWER=y
CONFIG_BATTERY_DS2780=y
CONFIG_BATTERY_DS2781=y
CONFIG_BATTERY_DS2782=y
CONFIG_BATTERY_SBS=y
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_BATTERY_DA9052 is not set
# CONFIG_BATTERY_MAX17040 is not set
CONFIG_BATTERY_MAX17042=y
CONFIG_CHARGER_PCF50633=y
# CONFIG_CHARGER_ISP1704 is not set
CONFIG_CHARGER_MAX8903=y
# CONFIG_CHARGER_LP8727 is not set
CONFIG_CHARGER_GPIO=y
# CONFIG_CHARGER_MANAGER is not set
CONFIG_CHARGER_MAX8997=y
CONFIG_CHARGER_MAX8998=y
CONFIG_CHARGER_BQ2415X=y
CONFIG_CHARGER_SMB347=y
CONFIG_BATTERY_GOLDFISH=y
# CONFIG_POWER_RESET is not set
# CONFIG_POWER_AVS is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
CONFIG_HWMON_DEBUG_CHIP=y

#
# Native drivers
#
CONFIG_SENSORS_AD7314=y
CONFIG_SENSORS_AD7414=y
# CONFIG_SENSORS_AD7418 is not set
CONFIG_SENSORS_ADCXX=y
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
CONFIG_SENSORS_ADM1026=y
CONFIG_SENSORS_ADM1029=y
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
CONFIG_SENSORS_ADT7X10=y
CONFIG_SENSORS_ADT7310=y
# CONFIG_SENSORS_ADT7410 is not set
CONFIG_SENSORS_ADT7411=y
CONFIG_SENSORS_ADT7462=y
CONFIG_SENSORS_ADT7470=y
# CONFIG_SENSORS_ADT7475 is not set
CONFIG_SENSORS_ASC7621=y
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_K10TEMP is not set
CONFIG_SENSORS_FAM15H_POWER=y
CONFIG_SENSORS_ASB100=y
CONFIG_SENSORS_ATXP1=y
CONFIG_SENSORS_DS620=y
CONFIG_SENSORS_DS1621=y
CONFIG_SENSORS_DA9052_ADC=y
# CONFIG_SENSORS_I5K_AMB is not set
CONFIG_SENSORS_F71805F=y
CONFIG_SENSORS_F71882FG=y
# CONFIG_SENSORS_F75375S is not set
CONFIG_SENSORS_FSCHMD=y
CONFIG_SENSORS_G760A=y
# CONFIG_SENSORS_G762 is not set
# CONFIG_SENSORS_GL518SM is not set
CONFIG_SENSORS_GL520SM=y
CONFIG_SENSORS_GPIO_FAN=y
CONFIG_SENSORS_HIH6130=y
# CONFIG_SENSORS_CORETEMP is not set
# CONFIG_SENSORS_IIO_HWMON is not set
CONFIG_SENSORS_IT87=y
CONFIG_SENSORS_JC42=y
CONFIG_SENSORS_LINEAGE=y
CONFIG_SENSORS_LM63=y
# CONFIG_SENSORS_LM70 is not set
CONFIG_SENSORS_LM73=y
# CONFIG_SENSORS_LM75 is not set
CONFIG_SENSORS_LM77=y
# CONFIG_SENSORS_LM78 is not set
CONFIG_SENSORS_LM80=y
CONFIG_SENSORS_LM83=y
# CONFIG_SENSORS_LM85 is not set
CONFIG_SENSORS_LM87=y
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
CONFIG_SENSORS_LM93=y
CONFIG_SENSORS_LTC4151=y
CONFIG_SENSORS_LTC4215=y
CONFIG_SENSORS_LTC4245=y
CONFIG_SENSORS_LTC4261=y
CONFIG_SENSORS_LM95234=y
CONFIG_SENSORS_LM95241=y
# CONFIG_SENSORS_LM95245 is not set
CONFIG_SENSORS_MAX1111=y
CONFIG_SENSORS_MAX16065=y
CONFIG_SENSORS_MAX1619=y
CONFIG_SENSORS_MAX1668=y
CONFIG_SENSORS_MAX197=y
# CONFIG_SENSORS_MAX6639 is not set
CONFIG_SENSORS_MAX6642=y
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_MAX6697 is not set
CONFIG_SENSORS_MCP3021=y
CONFIG_SENSORS_NCT6775=y
CONFIG_SENSORS_PC87360=y
CONFIG_SENSORS_PC87427=y
# CONFIG_SENSORS_PCF8591 is not set
CONFIG_PMBUS=y
# CONFIG_SENSORS_PMBUS is not set
CONFIG_SENSORS_ADM1275=y
# CONFIG_SENSORS_LM25066 is not set
CONFIG_SENSORS_LTC2978=y
CONFIG_SENSORS_MAX16064=y
# CONFIG_SENSORS_MAX34440 is not set
# CONFIG_SENSORS_MAX8688 is not set
CONFIG_SENSORS_UCD9000=y
CONFIG_SENSORS_UCD9200=y
CONFIG_SENSORS_ZL6100=y
CONFIG_SENSORS_SHT15=y
CONFIG_SENSORS_SHT21=y
CONFIG_SENSORS_SIS5595=y
# CONFIG_SENSORS_SMM665 is not set
# CONFIG_SENSORS_DME1737 is not set
CONFIG_SENSORS_EMC1403=y
CONFIG_SENSORS_EMC2103=y
CONFIG_SENSORS_EMC6W201=y
CONFIG_SENSORS_SMSC47M1=y
# CONFIG_SENSORS_SMSC47M192 is not set
CONFIG_SENSORS_SMSC47B397=y
# CONFIG_SENSORS_SCH56XX_COMMON is not set
CONFIG_SENSORS_ADS1015=y
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_ADS7871 is not set
CONFIG_SENSORS_AMC6821=y
CONFIG_SENSORS_INA209=y
# CONFIG_SENSORS_INA2XX is not set
CONFIG_SENSORS_THMC50=y
# CONFIG_SENSORS_TMP102 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
CONFIG_SENSORS_VIA_CPUTEMP=y
# CONFIG_SENSORS_VIA686A is not set
CONFIG_SENSORS_VT1211=y
CONFIG_SENSORS_VT8231=y
CONFIG_SENSORS_W83781D=y
CONFIG_SENSORS_W83791D=y
# CONFIG_SENSORS_W83792D is not set
CONFIG_SENSORS_W83793=y
CONFIG_SENSORS_W83795=y
# CONFIG_SENSORS_W83795_FANCTRL is not set
# CONFIG_SENSORS_W83L785TS is not set
CONFIG_SENSORS_W83L786NG=y
CONFIG_SENSORS_W83627HF=y
CONFIG_SENSORS_W83627EHF=y
CONFIG_SENSORS_WM831X=y
CONFIG_SENSORS_WM8350=y
CONFIG_SENSORS_APPLESMC=y

#
# ACPI drivers
#
# CONFIG_SENSORS_ACPI_POWER is not set
# CONFIG_SENSORS_ATK0110 is not set CONFIG_THERMAL=y
CONFIG_THERMAL_HWMON=y CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set # CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set # CONFIG_THERMAL_GOV_FAIR_SHARE is not set CONFIG_THERMAL_GOV_STEP_WISE=y
# CONFIG_THERMAL_GOV_USER_SPACE is not set # CONFIG_CPU_THERMAL is not set
# CONFIG_THERMAL_EMULATION is not set
# CONFIG_INTEL_POWERCLAMP is not set

#
# Texas Instruments thermal drivers
#
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
CONFIG_SSB=y
CONFIG_SSB_SPROM=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
# CONFIG_SSB_B43_PCI_BRIDGE is not set
CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
# CONFIG_SSB_PCMCIAHOST is not set
CONFIG_SSB_SDIOHOST_POSSIBLE=y
CONFIG_SSB_SDIOHOST=y
CONFIG_SSB_SILENT=y
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
CONFIG_SSB_DRIVER_GPIO=y
CONFIG_BCMA_POSSIBLE=y

#
# Broadcom specific AMBA
#
CONFIG_BCMA=y
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
# CONFIG_BCMA_HOST_PCI is not set
CONFIG_BCMA_DRIVER_GMAC_CMN=y
# CONFIG_BCMA_DRIVER_GPIO is not set
# CONFIG_BCMA_DEBUG is not set

#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
CONFIG_MFD_CS5535=y
# CONFIG_MFD_AS3711 is not set
CONFIG_PMIC_ADP5520=y
CONFIG_MFD_AAT2870_CORE=y
# CONFIG_MFD_CROS_EC is not set
# CONFIG_PMIC_DA903X is not set
CONFIG_PMIC_DA9052=y
# CONFIG_MFD_DA9052_SPI is not set
CONFIG_MFD_DA9052_I2C=y
# CONFIG_MFD_DA9055 is not set
# CONFIG_MFD_MC13XXX_SPI is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_HTC_I2CPLD is not set
CONFIG_LPC_ICH=y
CONFIG_LPC_SCH=y
CONFIG_MFD_JANZ_CMODIO=y
CONFIG_MFD_KEMPLD=y
# CONFIG_MFD_88PM800 is not set
CONFIG_MFD_88PM805=y
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_MAX77686 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX8907 is not set
# CONFIG_MFD_MAX8925 is not set
CONFIG_MFD_MAX8997=y
CONFIG_MFD_MAX8998=y
CONFIG_EZX_PCAP=y
CONFIG_MFD_VIPERBOARD=y
CONFIG_MFD_RETU=y
CONFIG_MFD_PCF50633=y
CONFIG_PCF50633_ADC=y
CONFIG_PCF50633_GPIO=y
CONFIG_MFD_RDC321X=y
# CONFIG_MFD_RTSX_PCI is not set
CONFIG_MFD_RC5T583=y
CONFIG_MFD_SEC_CORE=y
# CONFIG_MFD_SI476X_CORE is not set
# CONFIG_MFD_SM501 is not set
CONFIG_MFD_SMSC=y
# CONFIG_ABX500_CORE is not set
CONFIG_MFD_STMPE=y

#
# STMicroelectronics STMPE Interface Drivers
#
# CONFIG_STMPE_I2C is not set
# CONFIG_STMPE_SPI is not set
CONFIG_MFD_SYSCON=y
# CONFIG_MFD_TI_AM335X_TSCADC is not set
CONFIG_MFD_LP8788=y
# CONFIG_MFD_PALMAS is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS65010 is not set
CONFIG_TPS6507X=y
# CONFIG_MFD_TPS65090 is not set
# CONFIG_MFD_TPS65217 is not set
CONFIG_MFD_TPS6586X=y
CONFIG_MFD_TPS65910=y
CONFIG_MFD_TPS65912=y
CONFIG_MFD_TPS65912_I2C=y
# CONFIG_MFD_TPS65912_SPI is not set
# CONFIG_MFD_TPS80031 is not set
# CONFIG_TWL4030_CORE is not set
CONFIG_TWL6040_CORE=y
CONFIG_MFD_WL1273_CORE=y
CONFIG_MFD_LM3533=y
CONFIG_MFD_TIMBERDALE=y
CONFIG_MFD_TC3589X=y
# CONFIG_MFD_TMIO is not set
CONFIG_MFD_VX855=y
CONFIG_MFD_ARIZONA=y
# CONFIG_MFD_ARIZONA_I2C is not set
CONFIG_MFD_ARIZONA_SPI=y
CONFIG_MFD_WM5102=y
CONFIG_MFD_WM5110=y
# CONFIG_MFD_WM8997 is not set
# CONFIG_MFD_WM8400 is not set
CONFIG_MFD_WM831X=y
CONFIG_MFD_WM831X_I2C=y
CONFIG_MFD_WM831X_SPI=y
CONFIG_MFD_WM8350=y
CONFIG_MFD_WM8350_I2C=y
CONFIG_MFD_WM8994=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_DEBUG=y
CONFIG_REGULATOR_DUMMY=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
CONFIG_REGULATOR_GPIO=y
# CONFIG_REGULATOR_AD5398 is not set
# CONFIG_REGULATOR_AAT2870 is not set
CONFIG_REGULATOR_DA9052=y
# CONFIG_REGULATOR_FAN53555 is not set
# CONFIG_REGULATOR_ANATOP is not set
CONFIG_REGULATOR_ISL6271A=y
# CONFIG_REGULATOR_MAX1586 is not set
CONFIG_REGULATOR_MAX8649=y
CONFIG_REGULATOR_MAX8660=y
# CONFIG_REGULATOR_MAX8952 is not set
# CONFIG_REGULATOR_MAX8973 is not set
CONFIG_REGULATOR_MAX8997=y
CONFIG_REGULATOR_MAX8998=y
CONFIG_REGULATOR_PCAP=y
CONFIG_REGULATOR_LP3971=y
# CONFIG_REGULATOR_LP3972 is not set
CONFIG_REGULATOR_LP872X=y
CONFIG_REGULATOR_LP8755=y
CONFIG_REGULATOR_LP8788=y
CONFIG_REGULATOR_PCF50633=y
# CONFIG_REGULATOR_RC5T583 is not set
# CONFIG_REGULATOR_S2MPS11 is not set
CONFIG_REGULATOR_S5M8767=y
CONFIG_REGULATOR_TPS51632=y
CONFIG_REGULATOR_TPS62360=y
CONFIG_REGULATOR_TPS65023=y
CONFIG_REGULATOR_TPS6507X=y
CONFIG_REGULATOR_TPS6524X=y
CONFIG_REGULATOR_TPS6586X=y
CONFIG_REGULATOR_TPS65910=y
CONFIG_REGULATOR_TPS65912=y
# CONFIG_REGULATOR_WM831X is not set
CONFIG_REGULATOR_WM8350=y
CONFIG_REGULATOR_WM8994=y
# CONFIG_MEDIA_SUPPORT is not set

#
# Graphics support
#
CONFIG_AGP=y
# CONFIG_AGP_AMD64 is not set
CONFIG_AGP_INTEL=y
CONFIG_AGP_SIS=y
CONFIG_AGP_VIA=y
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_VGA_SWITCHEROO is not set
# CONFIG_DRM is not set
CONFIG_VGASTATE=y
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_DDC=y
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
CONFIG_FB_FOREIGN_ENDIAN=y
CONFIG_FB_BOTH_ENDIAN=y
# CONFIG_FB_BIG_ENDIAN is not set
# CONFIG_FB_LITTLE_ENDIAN is not set
CONFIG_FB_SYS_FOPS=y
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_HECUBA=y
CONFIG_FB_SVGALIB=y
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
CONFIG_FB_PM2=y
# CONFIG_FB_PM2_FIFO_DISCONNECT is not set
CONFIG_FB_CYBER2000=y
# CONFIG_FB_CYBER2000_DDC is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
CONFIG_FB_UVESA=y
# CONFIG_FB_VESA is not set
CONFIG_FB_N411=y
CONFIG_FB_HGA=y
CONFIG_FB_S1D13XXX=y
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
CONFIG_FB_I740=y
CONFIG_FB_LE80578=y
CONFIG_FB_CARILLO_RANCH=y
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
CONFIG_FB_RADEON=y
CONFIG_FB_RADEON_I2C=y
# CONFIG_FB_RADEON_BACKLIGHT is not set
# CONFIG_FB_RADEON_DEBUG is not set
CONFIG_FB_ATY128=y
CONFIG_FB_ATY128_BACKLIGHT=y
CONFIG_FB_ATY=y
CONFIG_FB_ATY_CT=y
# CONFIG_FB_ATY_GENERIC_LCD is not set
CONFIG_FB_ATY_GX=y
CONFIG_FB_ATY_BACKLIGHT=y
CONFIG_FB_S3=y
# CONFIG_FB_S3_DDC is not set
# CONFIG_FB_SAVAGE is not set
CONFIG_FB_SIS=y
# CONFIG_FB_SIS_300 is not set
# CONFIG_FB_SIS_315 is not set
CONFIG_FB_VIA=y
CONFIG_FB_VIA_DIRECT_PROCFS=y
# CONFIG_FB_VIA_X_COMPATIBILITY is not set
CONFIG_FB_NEOMAGIC=y
CONFIG_FB_KYRO=y
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
CONFIG_FB_VT8623=y
CONFIG_FB_TRIDENT=y
# CONFIG_FB_ARK is not set
CONFIG_FB_PM3=y
CONFIG_FB_CARMINE=y
CONFIG_FB_CARMINE_DRAM_EVAL=y
# CONFIG_CARMINE_DRAM_CUSTOM is not set
# CONFIG_FB_GEODE is not set
CONFIG_FB_TMIO=y
# CONFIG_FB_TMIO_ACCELL is not set
CONFIG_FB_SMSCUFX=y
CONFIG_FB_UDL=y
CONFIG_FB_GOLDFISH=y
# CONFIG_FB_VIRTUAL is not set
CONFIG_FB_METRONOME=y
CONFIG_FB_MB862XX=y
CONFIG_FB_MB862XX_PCI_GDC=y
# CONFIG_FB_MB862XX_I2C is not set
# CONFIG_FB_BROADSHEET is not set
# CONFIG_FB_AUO_K190X is not set
# CONFIG_EXYNOS_VIDEO is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
# CONFIG_LCD_L4F00242T03 is not set
CONFIG_LCD_LMS283GF05=y
CONFIG_LCD_LTV350QV=y
# CONFIG_LCD_ILI922X is not set
# CONFIG_LCD_ILI9320 is not set
CONFIG_LCD_TDO24M=y
# CONFIG_LCD_VGG2432A4 is not set
CONFIG_LCD_PLATFORM=y
# CONFIG_LCD_S6E63M0 is not set
CONFIG_LCD_LD9040=y
# CONFIG_LCD_AMS369FG06 is not set
CONFIG_LCD_LMS501KF03=y
CONFIG_LCD_HX8357=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=y
# CONFIG_BACKLIGHT_LM3533 is not set
CONFIG_BACKLIGHT_CARILLO_RANCH=y
CONFIG_BACKLIGHT_PWM=y
# CONFIG_BACKLIGHT_DA9052 is not set
# CONFIG_BACKLIGHT_APPLE is not set
CONFIG_BACKLIGHT_SAHARA=y
CONFIG_BACKLIGHT_WM831X=y
CONFIG_BACKLIGHT_ADP5520=y
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
CONFIG_BACKLIGHT_PCF50633=y
CONFIG_BACKLIGHT_AAT2870=y
CONFIG_BACKLIGHT_LM3630=y
CONFIG_BACKLIGHT_LM3639=y
CONFIG_BACKLIGHT_LP855X=y
# CONFIG_BACKLIGHT_LP8788 is not set
# CONFIG_BACKLIGHT_OT200 is not set
# CONFIG_LOGO is not set
# CONFIG_SOUND is not set

#
# HID support
#
CONFIG_HID=y
CONFIG_HID_BATTERY_STRENGTH=y
# CONFIG_HIDRAW is not set
# CONFIG_UHID is not set
# CONFIG_HID_GENERIC is not set

#
# Special HID drivers
#
CONFIG_HID_A4TECH=y
CONFIG_HID_ACRUX=y
# CONFIG_HID_ACRUX_FF is not set
# CONFIG_HID_APPLE is not set
CONFIG_HID_APPLEIR=y
# CONFIG_HID_AUREAL is not set
CONFIG_HID_BELKIN=y
# CONFIG_HID_CHERRY is not set
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
# CONFIG_HID_DRAGONRISE is not set
CONFIG_HID_EMS_FF=y
# CONFIG_HID_ELECOM is not set
CONFIG_HID_ELO=y
CONFIG_HID_EZKEY=y
# CONFIG_HID_HOLTEK is not set
CONFIG_HID_HUION=y
# CONFIG_HID_KEYTOUCH is not set
CONFIG_HID_KYE=y
# CONFIG_HID_UCLOGIC is not set
CONFIG_HID_WALTOP=y
# CONFIG_HID_GYRATION is not set
CONFIG_HID_ICADE=y
# CONFIG_HID_TWINHAN is not set
CONFIG_HID_KENSINGTON=y
CONFIG_HID_LCPOWER=y
CONFIG_HID_LENOVO_TPKBD=y
CONFIG_HID_LOGITECH=y
CONFIG_HID_LOGITECH_DJ=y
CONFIG_LOGITECH_FF=y
# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_LOGIG940_FF=y
CONFIG_LOGIWHEELS_FF=y
CONFIG_HID_MAGICMOUSE=y
# CONFIG_HID_MICROSOFT is not set
# CONFIG_HID_MONTEREY is not set
CONFIG_HID_MULTITOUCH=y
CONFIG_HID_NTRIG=y
CONFIG_HID_ORTEK=y
CONFIG_HID_PANTHERLORD=y
# CONFIG_PANTHERLORD_FF is not set
# CONFIG_HID_PETALYNX is not set
CONFIG_HID_PICOLCD=y
# CONFIG_HID_PICOLCD_FB is not set
# CONFIG_HID_PICOLCD_BACKLIGHT is not set
# CONFIG_HID_PICOLCD_LCD is not set
# CONFIG_HID_PICOLCD_LEDS is not set
# CONFIG_HID_PRIMAX is not set
CONFIG_HID_ROCCAT=y
CONFIG_HID_SAITEK=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SPEEDLINK=y
CONFIG_HID_STEELSERIES=y
CONFIG_HID_SUNPLUS=y
CONFIG_HID_GREENASIA=y
CONFIG_GREENASIA_FF=y
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TIVO is not set
# CONFIG_HID_TOPSEED is not set
CONFIG_HID_THINGM=y
# CONFIG_HID_THRUSTMASTER is not set
# CONFIG_HID_WACOM is not set
CONFIG_HID_WIIMOTE=y
CONFIG_HID_ZEROPLUS=y
# CONFIG_ZEROPLUS_FF is not set
CONFIG_HID_ZYDACRON=y
CONFIG_HID_SENSOR_HUB=y

#
# USB HID support
#
CONFIG_USB_HID=y
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y

#
# I2C HID support
#
# CONFIG_I2C_HID is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y

#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
CONFIG_USB_OTG_BLACKLIST_HUB=y
# CONFIG_USB_MON is not set
CONFIG_USB_WUSB=y
# CONFIG_USB_WUSB_CBAF is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_PLATFORM=y
# CONFIG_USB_XHCI_HCD_DEBUGGING is not set
# CONFIG_USB_EHCI_HCD is not set
CONFIG_USB_OXU210HP_HCD=y
CONFIG_USB_ISP116X_HCD=y
CONFIG_USB_ISP1760_HCD=y
# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_FUSBH200_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PCI=y
# CONFIG_USB_OHCI_HCD_SSB is not set
CONFIG_USB_OHCI_HCD_PLATFORM=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
CONFIG_USB_U132_HCD=y
CONFIG_USB_SL811_HCD=y
# CONFIG_USB_SL811_HCD_ISO is not set
CONFIG_USB_SL811_CS=y
# CONFIG_USB_R8A66597_HCD is not set
CONFIG_USB_WHCI_HCD=y
CONFIG_USB_HWA_HCD=y
CONFIG_USB_HCD_BCMA=y
CONFIG_USB_HCD_SSB=y

#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
CONFIG_USB_WDM=y
CONFIG_USB_TMC=y

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may #

#

# also be needed; see USB_STORAGE Help for more info
#

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
CONFIG_USB_DWC3=y
CONFIG_USB_DWC3_HOST=y
CONFIG_USB_DWC3_DEBUG=y
CONFIG_USB_DWC3_VERBOSE=y
# CONFIG_USB_CHIPIDEA is not set

#
# USB port drivers
#
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=y
CONFIG_USB_EMI26=y
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
CONFIG_USB_RIO500=y
CONFIG_USB_LEGOTOWER=y
CONFIG_USB_LCD=y
CONFIG_USB_LED=y
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
CONFIG_USB_IDMOUSE=y
CONFIG_USB_FTDI_ELAN=y
CONFIG_USB_APPLEDISPLAY=y
CONFIG_USB_LD=y
CONFIG_USB_TRANCEVIBRATOR=y
# CONFIG_USB_IOWARRIOR is not set
CONFIG_USB_TEST=y
# CONFIG_USB_ISIGHTFW is not set
CONFIG_USB_YUREX=y
# CONFIG_USB_EZUSB_FX2 is not set
CONFIG_USB_HSIC_USB3503=y
CONFIG_USB_PHY=y
CONFIG_NOP_USB_XCEIV=y
CONFIG_OMAP_CONTROL_USB=y
CONFIG_OMAP_USB3=y
CONFIG_SAMSUNG_USBPHY=y
# CONFIG_SAMSUNG_USB2PHY is not set
CONFIG_SAMSUNG_USB3PHY=y
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_USB_ISP1301 is not set
CONFIG_USB_RCAR_PHY=y
# CONFIG_USB_GADGET is not set
CONFIG_UWB=y
CONFIG_UWB_HWA=y
CONFIG_UWB_WHCI=y
# CONFIG_UWB_I1480U is not set
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
CONFIG_MMC_CLKGATE=y

#
# MMC/SD/SDIO Card Drivers
#
# CONFIG_SDIO_UART is not set
CONFIG_MMC_TEST=y

#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PCI=y
CONFIG_MMC_RICOH_MMC=y
# CONFIG_MMC_SDHCI_ACPI is not set
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_TIFM_SD=y
CONFIG_MMC_SPI=y
CONFIG_MMC_SDRICOH_CS=y
CONFIG_MMC_CB710=y
# CONFIG_MMC_VIA_SDMMC is not set
CONFIG_MMC_VUB300=y
CONFIG_MMC_USHC=y
CONFIG_MEMSTICK=y
CONFIG_MEMSTICK_DEBUG=y

#
# MemoryStick drivers
#
CONFIG_MEMSTICK_UNSAFE_RESUME=y

#
# MemoryStick Host Controller Drivers
#
# CONFIG_MEMSTICK_TIFM_MS is not set
CONFIG_MEMSTICK_JMICRON_38X=y
CONFIG_MEMSTICK_R592=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y

#
# LED drivers
#
CONFIG_LEDS_LM3530=y
CONFIG_LEDS_LM3533=y
# CONFIG_LEDS_LM3642 is not set
CONFIG_LEDS_PCA9532=y
# CONFIG_LEDS_PCA9532_GPIO is not set
# CONFIG_LEDS_GPIO is not set
CONFIG_LEDS_LP3944=y
CONFIG_LEDS_LP55XX_COMMON=y
CONFIG_LEDS_LP5521=y
CONFIG_LEDS_LP5523=y
CONFIG_LEDS_LP5562=y
CONFIG_LEDS_LP8788=y
CONFIG_LEDS_PCA955X=y
# CONFIG_LEDS_PCA9633 is not set
# CONFIG_LEDS_WM831X_STATUS is not set
CONFIG_LEDS_WM8350=y
CONFIG_LEDS_DA9052=y
# CONFIG_LEDS_DAC124S085 is not set
CONFIG_LEDS_PWM=y
# CONFIG_LEDS_REGULATOR is not set
CONFIG_LEDS_BD2802=y
CONFIG_LEDS_LT3593=y
CONFIG_LEDS_ADP5520=y
# CONFIG_LEDS_DELL_NETBOOKS is not set
# CONFIG_LEDS_TCA6507 is not set
CONFIG_LEDS_MAX8997=y
# CONFIG_LEDS_LM355x is not set
CONFIG_LEDS_OT200=y
CONFIG_LEDS_BLINKM=y

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
# CONFIG_LEDS_TRIGGER_TIMER is not set
# CONFIG_LEDS_TRIGGER_ONESHOT is not set
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
CONFIG_LEDS_TRIGGER_CPU=y
CONFIG_LEDS_TRIGGER_GPIO=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y

#

# iptables trigger is under Netfilter config (LED target)
#
CONFIG_LEDS_TRIGGER_TRANSIENT=y
# CONFIG_LEDS_TRIGGER_CAMERA is not set
CONFIG_ACCESSIBILITY=y
# CONFIG_INFINIBAND is not set
CONFIG_EDAC=y
# CONFIG_EDAC_LEGACY_SYSFS is not set
CONFIG_EDAC_DEBUG=y
# CONFIG_EDAC_MM_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
# CONFIG_RTC_SYSTOHC is not set
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
CONFIG_RTC_DEBUG=y

#
# RTC interfaces
#
# CONFIG_RTC_INTF_SYSFS is not set
CONFIG_RTC_INTF_DEV=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
CONFIG_RTC_DRV_TEST=y

#
# I2C RTC drivers
#
CONFIG_RTC_DRV_DS1307=y
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
CONFIG_RTC_DRV_DS3232=y
# CONFIG_RTC_DRV_LP8788 is not set
CONFIG_RTC_DRV_MAX6900=y
CONFIG_RTC_DRV_MAX8998=y
CONFIG_RTC_DRV_MAX8997=y
# CONFIG_RTC_DRV_RS5C372 is not set
CONFIG_RTC_DRV_ISL1208=y
CONFIG_RTC_DRV_ISL12022=y
CONFIG_RTC_DRV_X1205=y
CONFIG_RTC_DRV_PCF2127=y
CONFIG_RTC_DRV_PCF8523=y
# CONFIG_RTC_DRV_PCF8563 is not set
CONFIG_RTC_DRV_PCF8583=y
CONFIG_RTC_DRV_M41T80=y
CONFIG_RTC_DRV_M41T80_WDT=y
# CONFIG_RTC_DRV_BQ32K is not set
CONFIG_RTC_DRV_TPS6586X=y
CONFIG_RTC_DRV_TPS65910=y
CONFIG_RTC_DRV_RC5T583=y
CONFIG_RTC_DRV_S35390A=y
CONFIG_RTC_DRV_FM3130=y
CONFIG_RTC_DRV_RX8581=y
# CONFIG_RTC_DRV_RX8025 is not set
# CONFIG_RTC_DRV_EM3027 is not set
CONFIG_RTC_DRV_RV3029C2=y

#
# SPI RTC drivers
#
CONFIG_RTC_DRV_M41T93=y
CONFIG_RTC_DRV_M41T94=y
CONFIG_RTC_DRV_DS1305=y
CONFIG_RTC_DRV_DS1390=y
CONFIG_RTC_DRV_MAX6902=y
CONFIG_RTC_DRV_R9701=y
CONFIG_RTC_DRV_RS5C348=y
CONFIG_RTC_DRV_DS3234=y
CONFIG_RTC_DRV_PCF2123=y
CONFIG_RTC_DRV_RX4581=y

#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
CONFIG_RTC_DRV_DS1286=y
CONFIG_RTC_DRV_DS1511=y
# CONFIG_RTC_DRV_DS1553 is not set
CONFIG_RTC_DRV_DS1742=y
# CONFIG_RTC_DRV_DA9052 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
CONFIG_RTC_DRV_M48T86=y
CONFIG_RTC_DRV_M48T35=y
CONFIG_RTC_DRV_M48T59=y
# CONFIG_RTC_DRV_MSM6242 is not set
CONFIG_RTC_DRV_BQ4802=y
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
# CONFIG_RTC_DRV_DS2404 is not set
# CONFIG_RTC_DRV_WM831X is not set
CONFIG_RTC_DRV_WM8350=y
CONFIG_RTC_DRV_PCF50633=y

#
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_PCAP is not set

#
# HID Sensor RTC drivers
#
CONFIG_RTC_DRV_HID_SENSOR_TIME=y
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
CONFIG_UIO=y
CONFIG_UIO_CIF=y
# CONFIG_UIO_PDRV is not set
# CONFIG_UIO_PDRV_GENIRQ is not set
CONFIG_UIO_DMEM_GENIRQ=y
# CONFIG_UIO_AEC is not set
CONFIG_UIO_SERCOS3=y
CONFIG_UIO_PCI_GENERIC=y
CONFIG_UIO_NETX=y
# CONFIG_VIRT_DRIVERS is not set
CONFIG_VIRTIO=y

#
# Virtio drivers
#
# CONFIG_VIRTIO_PCI is not set
CONFIG_VIRTIO_BALLOON=y
CONFIG_VIRTIO_MMIO=y
CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y

#
# Microsoft Hyper-V guest support
#
# CONFIG_HYPERV is not set
CONFIG_STAGING=y
CONFIG_SLICOSS=y
CONFIG_USBIP_CORE=y
CONFIG_USBIP_VHCI_HCD=y
CONFIG_USBIP_HOST=y
CONFIG_USBIP_DEBUG=y
CONFIG_ECHO=y
# CONFIG_ASUS_OLED is not set
CONFIG_TRANZPORT=y
# CONFIG_DX_SEP is not set

#
# IIO staging drivers
#

#
# Accelerometers
#
# CONFIG_ADIS16201 is not set
# CONFIG_ADIS16203 is not set
CONFIG_ADIS16204=y
CONFIG_ADIS16209=y
# CONFIG_ADIS16220 is not set
CONFIG_ADIS16240=y
CONFIG_LIS3L02DQ=y
CONFIG_SCA3000=y

#
# Analog to digital converters
#
CONFIG_AD7291=y
CONFIG_AD7606=y
# CONFIG_AD7606_IFACE_PARALLEL is not set
# CONFIG_AD7606_IFACE_SPI is not set
CONFIG_AD799X=y
CONFIG_AD799X_RING_BUFFER=y
# CONFIG_AD7780 is not set
# CONFIG_AD7816 is not set
# CONFIG_AD7192 is not set
CONFIG_AD7280=y

#
# Analog digital bi-direction converters
#
# CONFIG_ADT7316 is not set

#
# Capacitance to digital converters
#
# CONFIG_AD7150 is not set
CONFIG_AD7152=y
# CONFIG_AD7746 is not set

#
# Direct Digital Synthesis
#
CONFIG_AD5930=y
CONFIG_AD9832=y
CONFIG_AD9834=y
# CONFIG_AD9850 is not set
CONFIG_AD9852=y
CONFIG_AD9910=y
# CONFIG_AD9951 is not set

#
# Digital gyroscope sensors
#
CONFIG_ADIS16060=y
CONFIG_ADIS16260=y

#
# Network Analyzer, Impedance Converters
#
CONFIG_AD5933=y

#
# Light sensors
#
CONFIG_SENSORS_ISL29018=y
CONFIG_SENSORS_ISL29028=y
# CONFIG_TSL2583 is not set
# CONFIG_TSL2x7x is not set

#
# Magnetometer sensors
#
# CONFIG_SENSORS_HMC5843 is not set

#
# Active energy metering IC
#
# CONFIG_ADE7753 is not set
CONFIG_ADE7754=y
# CONFIG_ADE7758 is not set
CONFIG_ADE7759=y
CONFIG_ADE7854=y
CONFIG_ADE7854_I2C=y
CONFIG_ADE7854_SPI=y

#
# Resolver to digital converters
#
CONFIG_AD2S90=y
CONFIG_AD2S1200=y
CONFIG_AD2S1210=y

#
# Triggers - standalone
#
CONFIG_IIO_PERIODIC_RTC_TRIGGER=y
CONFIG_IIO_SIMPLE_DUMMY=y
# CONFIG_IIO_SIMPLE_DUMMY_EVENTS is not set
CONFIG_IIO_SIMPLE_DUMMY_BUFFER=y
CONFIG_ZSMALLOC=y
CONFIG_FB_SM7XX=y
CONFIG_CRYSTALHD=y
CONFIG_FB_XGI=y
# CONFIG_ACPI_QUICKSTART is not set
# CONFIG_BCM_WIMAX is not set
CONFIG_FT1000=y
CONFIG_FT1000_USB=y
CONFIG_FT1000_PCMCIA=y

#
# Speakup console speech
#
CONFIG_TOUCHSCREEN_CLEARPAD_TM1217=y
CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4=y
# CONFIG_STAGING_MEDIA is not set

#
# Android
#
# CONFIG_ANDROID is not set
# CONFIG_USB_WPAN_HCD is not set
CONFIG_WIMAX_GDM72XX=y
# CONFIG_WIMAX_GDM72XX_QOS is not set
# CONFIG_WIMAX_GDM72XX_K_MODE is not set
# CONFIG_WIMAX_GDM72XX_WIMAX2 is not set
CONFIG_WIMAX_GDM72XX_USB=y
# CONFIG_WIMAX_GDM72XX_SDIO is not set
CONFIG_WIMAX_GDM72XX_USB_PM=y
CONFIG_CED1401=y
# CONFIG_DGRP is not set
CONFIG_USB_DWC2=y
# CONFIG_USB_DWC2_DEBUG is not set
# CONFIG_USB_DWC2_TRACK_MISSED_SOFS is not set
CONFIG_X86_PLATFORM_DEVICES=y
# CONFIG_ACER_WMI is not set
# CONFIG_ACERHDF is not set
# CONFIG_ASUS_LAPTOP is not set
# CONFIG_DELL_LAPTOP is not set
# CONFIG_DELL_WMI is not set
# CONFIG_DELL_WMI_AIO is not set
# CONFIG_FUJITSU_LAPTOP is not set
# CONFIG_FUJITSU_TABLET is not set
# CONFIG_AMILO_RFKILL is not set
# CONFIG_HP_ACCEL is not set
# CONFIG_HP_WMI is not set
# CONFIG_MSI_LAPTOP is not set
# CONFIG_PANASONIC_LAPTOP is not set
# CONFIG_COMPAL_LAPTOP is not set
# CONFIG_SONY_LAPTOP is not set
# CONFIG_IDEAPAD_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_INTEL_MENLOW is not set
CONFIG_ACPI_WMI=y
# CONFIG_MSI_WMI is not set
# CONFIG_TOPSTAR_LAPTOP is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_TOSHIBA_BT_RFKILL is not set
# CONFIG_ACPI_CMPC is not set
# CONFIG_INTEL_IPS is not set
# CONFIG_IBM_RTL is not set
# CONFIG_XO15_EBOOK is not set
# CONFIG_SAMSUNG_LAPTOP is not set
CONFIG_MXM_WMI=y
# CONFIG_INTEL_OAKTRAIL is not set
# CONFIG_SAMSUNG_Q10 is not set
# CONFIG_APPLE_GMUX is not set
# CONFIG_INTEL_RST is not set
# CONFIG_INTEL_SMARTCONNECT is not set
# CONFIG_PVPANIC is not set

#
# Hardware Spinlock drivers
#
CONFIG_CLKEVT_I8253=y
CONFIG_CLKBLD_I8253=y
CONFIG_MAILBOX=y
CONFIG_IOMMU_SUPPORT=y
# CONFIG_AMD_IOMMU is not set
# CONFIG_INTEL_IOMMU is not set
# CONFIG_IRQ_REMAP is not set

#
# Remoteproc drivers
#
# CONFIG_STE_MODEM_RPROC is not set

#
# Rpmsg drivers
#
# CONFIG_PM_DEVFREQ is not set
CONFIG_EXTCON=y

#
# Extcon Device Drivers
#
# CONFIG_EXTCON_GPIO is not set
CONFIG_EXTCON_ADC_JACK=y
# CONFIG_EXTCON_MAX8997 is not set
# CONFIG_MEMORY is not set
CONFIG_IIO=y
CONFIG_IIO_BUFFER=y
# CONFIG_IIO_BUFFER_CB is not set
CONFIG_IIO_KFIFO_BUF=y
CONFIG_IIO_TRIGGERED_BUFFER=y
CONFIG_IIO_TRIGGER=y
CONFIG_IIO_CONSUMERS_PER_TRIGGER=2

#
# Accelerometers
#
CONFIG_HID_SENSOR_ACCEL_3D=y
CONFIG_KXSD9=y
# CONFIG_IIO_ST_ACCEL_3AXIS is not set

#
# Analog to digital converters
#
CONFIG_AD_SIGMA_DELTA=y
# CONFIG_AD7266 is not set
# CONFIG_AD7298 is not set
CONFIG_AD7923=y
CONFIG_AD7791=y
# CONFIG_AD7793 is not set
# CONFIG_AD7476 is not set
# CONFIG_AD7887 is not set
# CONFIG_LP8788_ADC is not set
CONFIG_MAX1363=y
CONFIG_MCP320X=y
CONFIG_TI_ADC081C=y
CONFIG_VIPERBOARD_ADC=y

#
# Amplifiers
#
# CONFIG_AD8366 is not set

#
# Hid Sensor IIO Common
#
CONFIG_HID_SENSOR_IIO_COMMON=y
CONFIG_HID_SENSOR_IIO_TRIGGER=y
# CONFIG_HID_SENSOR_ENUM_BASE_QUIRKS is not set
CONFIG_IIO_ST_SENSORS_I2C=y
CONFIG_IIO_ST_SENSORS_SPI=y
CONFIG_IIO_ST_SENSORS_CORE=y

#
# Digital to analog converters
#
# CONFIG_AD5064 is not set
CONFIG_AD5360=y
CONFIG_AD5380=y
CONFIG_AD5421=y
# CONFIG_AD5624R_SPI is not set
CONFIG_AD5446=y
CONFIG_AD5449=y
# CONFIG_AD5504 is not set
CONFIG_AD5755=y
# CONFIG_AD5764 is not set
# CONFIG_AD5791 is not set
# CONFIG_AD5686 is not set
CONFIG_AD7303=y
CONFIG_MAX517=y
# CONFIG_MCP4725 is not set

#
# Frequency Synthesizers DDS/PLL
#

#
# Clock Generator/Distribution
#
# CONFIG_AD9523 is not set

#
# Phase-Locked Loop (PLL) frequency synthesizers
#
CONFIG_ADF4350=y

#
# Digital gyroscope sensors
#
CONFIG_ADIS16080=y
CONFIG_ADIS16130=y
CONFIG_ADIS16136=y
CONFIG_ADXRS450=y
CONFIG_HID_SENSOR_GYRO_3D=y
CONFIG_IIO_ST_GYRO_3AXIS=y
CONFIG_IIO_ST_GYRO_I2C_3AXIS=y
CONFIG_IIO_ST_GYRO_SPI_3AXIS=y
# CONFIG_ITG3200 is not set

#
# Inertial measurement units
#
CONFIG_ADIS16400=y
CONFIG_ADIS16480=y
CONFIG_IIO_ADIS_LIB=y
CONFIG_IIO_ADIS_LIB_BUFFER=y
CONFIG_INV_MPU6050_IIO=y

#
# Light sensors
#
CONFIG_ADJD_S311=y
CONFIG_SENSORS_LM3533=y
CONFIG_SENSORS_TSL2563=y
CONFIG_VCNL4000=y
CONFIG_HID_SENSOR_ALS=y

#
# Magnetometer sensors
#
CONFIG_AK8975=y
CONFIG_HID_SENSOR_MAGNETOMETER_3D=y
# CONFIG_IIO_ST_MAGN_3AXIS is not set

#
# Triggers - standalone
#
CONFIG_IIO_INTERRUPT_TRIGGER=y
CONFIG_IIO_SYSFS_TRIGGER=y

#
# Pressure Sensors
#
CONFIG_IIO_ST_PRESS=y
CONFIG_IIO_ST_PRESS_I2C=y
CONFIG_IIO_ST_PRESS_SPI=y
CONFIG_NTB=y
CONFIG_VME_BUS=y

#
# VME Bridge Drivers
#
CONFIG_VME_CA91CX42=y
CONFIG_VME_TSI148=y

#
# VME Board Drivers
#
CONFIG_VMIVME_7805=y

#
# VME Device Drivers
#
CONFIG_VME_USER=y
# CONFIG_VME_PIO2 is not set
CONFIG_PWM=y
CONFIG_PWM_SYSFS=y
CONFIG_IPACK_BUS=y
# CONFIG_BOARD_TPCI200 is not set
# CONFIG_SERIAL_IPOCTAL is not set
# CONFIG_RESET_CONTROLLER is not set
CONFIG_FMC=y
# CONFIG_FMC_FAKEDEV is not set
CONFIG_FMC_TRIVIAL=y
# CONFIG_FMC_WRITE_EEPROM is not set
# CONFIG_FMC_CHARDEV is not set

#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_DELL_RBU=y
CONFIG_DCDBAS=y
# CONFIG_ISCSI_IBFT_FIND is not set
# CONFIG_GOOGLE_FIRMWARE is not set

#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
# CONFIG_FS_POSIX_ACL is not set
CONFIG_EXPORTFS=y
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
# CONFIG_QUOTA is not set
# CONFIG_QUOTACTL is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=y
CONFIG_CUSE=y

#
# Caches
#
# CONFIG_FSCACHE is not set

#
# Pseudo filesystems
#
# CONFIG_PROC_FS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
# CONFIG_TMPFS is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=y
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ECRYPT_FS is not set
# CONFIG_JFFS2_FS is not set
CONFIG_LOGFS=y
CONFIG_ROMFS_FS=y
CONFIG_ROMFS_BACKED_BY_MTD=y
CONFIG_ROMFS_ON_MTD=y
CONFIG_PSTORE=y
CONFIG_PSTORE_CONSOLE=y
# CONFIG_PSTORE_RAM is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V2 is not set
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
# CONFIG_NFS_SWAP is not set
# CONFIG_NFS_V4_1 is not set
# CONFIG_ROOT_NFS is not set
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
CONFIG_NFSD=y
# CONFIG_NFSD_V3 is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
CONFIG_CEPH_FS=y
# CONFIG_CIFS is not set
CONFIG_NCP_FS=y
# CONFIG_NCPFS_PACKET_SIGNING is not set
CONFIG_NCPFS_IOCTL_LOCKING=y
CONFIG_NCPFS_STRONG=y
# CONFIG_NCPFS_NFS_NS is not set
# CONFIG_NCPFS_OS2_NS is not set
CONFIG_NCPFS_SMALLDOS=y
CONFIG_NCPFS_NLS=y
# CONFIG_NCPFS_EXTRAS is not set
CONFIG_CODA_FS=y
# CONFIG_AFS_FS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=y
CONFIG_NLS_CODEPAGE_775=y
CONFIG_NLS_CODEPAGE_850=y
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
CONFIG_NLS_CODEPAGE_857=y
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
CONFIG_NLS_CODEPAGE_863=y
CONFIG_NLS_CODEPAGE_864=y
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
CONFIG_NLS_CODEPAGE_950=y
CONFIG_NLS_CODEPAGE_932=y
CONFIG_NLS_CODEPAGE_949=y
CONFIG_NLS_CODEPAGE_874=y
CONFIG_NLS_ISO8859_8=y
CONFIG_NLS_CODEPAGE_1250=y
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=y
CONFIG_NLS_ISO8859_3=y
# CONFIG_NLS_ISO8859_4 is not set
CONFIG_NLS_ISO8859_5=y
CONFIG_NLS_ISO8859_6=y
CONFIG_NLS_ISO8859_7=y
CONFIG_NLS_ISO8859_9=y
CONFIG_NLS_ISO8859_13=y
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_MAC_ROMAN=y
# CONFIG_NLS_MAC_CELTIC is not set
# CONFIG_NLS_MAC_CENTEURO is not set
CONFIG_NLS_MAC_CROATIAN=y
# CONFIG_NLS_MAC_CYRILLIC is not set
# CONFIG_NLS_MAC_GAELIC is not set
# CONFIG_NLS_MAC_GREEK is not set
# CONFIG_NLS_MAC_ICELAND is not set
# CONFIG_NLS_MAC_INUIT is not set
# CONFIG_NLS_MAC_ROMANIAN is not set
# CONFIG_NLS_MAC_TURKISH is not set
CONFIG_NLS_UTF8=y
CONFIG_DLM=y
CONFIG_DLM_DEBUG=y

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y

#

# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_DYNAMIC_DEBUG is not set

#
# Compile-time checks and compiler options
#
# CONFIG_DEBUG_INFO is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_READABLE_ASM is not set
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
# CONFIG_MAGIC_SYSRQ is not set
CONFIG_DEBUG_KERNEL=y

#
# Memory Debugging
#
CONFIG_DEBUG_PAGEALLOC=y
CONFIG_WANT_PAGE_DEBUG_FLAGS=y
CONFIG_PAGE_GUARD=y
CONFIG_DEBUG_OBJECTS=y
# CONFIG_DEBUG_OBJECTS_SELFTEST is not set
# CONFIG_DEBUG_OBJECTS_FREE is not set
CONFIG_DEBUG_OBJECTS_TIMERS=y
CONFIG_DEBUG_OBJECTS_WORK=y
CONFIG_DEBUG_OBJECTS_RCU_HEAD=y
# CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER is not set
CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
# CONFIG_DEBUG_SLAB is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
CONFIG_DEBUG_STACK_USAGE=y
CONFIG_DEBUG_VM=y
# CONFIG_DEBUG_VM_RB is not set
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_DEBUG_SHIRQ is not set

#
# Debug Lockups and Hangs
#
# CONFIG_LOCKUP_DETECTOR is not set
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_DEBUG_PREEMPT=y

#
# Lock Debugging (spinlocks, mutexes, etc...)
#
# CONFIG_DEBUG_RT_MUTEXES is not set
CONFIG_RT_MUTEX_TESTER=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
CONFIG_LOCKDEP=y
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_LOCKDEP is not set
CONFIG_DEBUG_ATOMIC_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_TRACE_IRQFLAGS=y
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_KOBJECT_RELEASE=y
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_WRITECOUNT=y
# CONFIG_DEBUG_LIST is not set
CONFIG_DEBUG_SG=y
# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_DEBUG_CREDENTIALS=y

#
# RCU Debugging
#
# CONFIG_PROVE_RCU is not set
# CONFIG_PROVE_RCU_DELAY is not set
CONFIG_SPARSE_RCU_POINTER=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=21
# CONFIG_RCU_CPU_STALL_VERBOSE is not set
CONFIG_RCU_CPU_STALL_INFO=y
CONFIG_RCU_TRACE=y
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
CONFIG_FAULT_INJECTION=y
# CONFIG_FAILSLAB is not set
# CONFIG_FAIL_PAGE_ALLOC is not set
CONFIG_FAIL_MMC_REQUEST=y
# CONFIG_FAULT_INJECTION_DEBUG_FS is not set
CONFIG_ARCH_HAS_DEBUG_STRICT_USER_COPY_CHECKS=y
# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_FENTRY=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACE_CLOCK=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set

#
# Runtime Testing
#
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
CONFIG_ATOMIC64_SELFTEST=y
CONFIG_TEST_STRING_HELPERS=y
CONFIG_TEST_KSTRTOX=y
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
CONFIG_BUILD_DOCSRC=y
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_STRICT_DEVMEM is not set
# CONFIG_X86_VERBOSE_BOOTUP is not set
# CONFIG_EARLY_PRINTK is not set
# CONFIG_X86_PTDUMP is not set
# CONFIG_DEBUG_RODATA is not set
# CONFIG_DOUBLEFAULT is not set
CONFIG_DEBUG_TLBFLUSH=y
CONFIG_IOMMU_STRESS=y
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
# CONFIG_IO_DELAY_0X80 is not set
CONFIG_IO_DELAY_0XED=y
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=1
CONFIG_DEBUG_BOOT_PARAMS=y
# CONFIG_CPA_DEBUG is not set
CONFIG_OPTIMIZE_INLINING=y
# CONFIG_DEBUG_NMI_SELFTEST is not set
# CONFIG_X86_DEBUG_STATIC_CPU_HAS is not set

#
# Security options
#
CONFIG_KEYS=y
# CONFIG_TRUSTED_KEYS is not set
# CONFIG_ENCRYPTED_KEYS is not set
# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
CONFIG_SECURITY_DMESG_RESTRICT=y
# CONFIG_SECURITY is not set
CONFIG_SECURITYFS=y
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_USER=y
# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_PCRYPT=y
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=y
CONFIG_CRYPTO_AUTHENC=y
CONFIG_CRYPTO_ABLK_HELPER_X86=y
CONFIG_CRYPTO_GLUE_HELPER_X86=y

#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
CONFIG_CRYPTO_GCM=y
CONFIG_CRYPTO_SEQIV=y

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=y
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_XTS=y

#
# Hash modes
#
CONFIG_CRYPTO_CMAC=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=y
CONFIG_CRYPTO_VMAC=y

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CRC32C_INTEL is not set
CONFIG_CRYPTO_CRC32=y
# CONFIG_CRYPTO_CRC32_PCLMUL is not set
CONFIG_CRYPTO_CRCT10DIF=y
# CONFIG_CRYPTO_CRCT10DIF_PCLMUL is not set
CONFIG_CRYPTO_GHASH=y
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=y
# CONFIG_CRYPTO_RMD128 is not set
CONFIG_CRYPTO_RMD160=y
CONFIG_CRYPTO_RMD256=y
CONFIG_CRYPTO_RMD320=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA1_SSSE3=y
CONFIG_CRYPTO_SHA256_SSSE3=y
CONFIG_CRYPTO_SHA512_SSSE3=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_TGR192=y
CONFIG_CRYPTO_WP512=y
CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=y

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_X86_64 is not set
# CONFIG_CRYPTO_AES_NI_INTEL is not set CONFIG_CRYPTO_ANUBIS=y
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_BLOWFISH=y CONFIG_CRYPTO_BLOWFISH_COMMON=y CONFIG_CRYPTO_BLOWFISH_X86_64=y
# CONFIG_CRYPTO_CAMELLIA is not set CONFIG_CRYPTO_CAMELLIA_X86_64=y CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64=y
# CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64 is not set CONFIG_CRYPTO_CAST_COMMON=y CONFIG_CRYPTO_CAST5=y
# CONFIG_CRYPTO_CAST5_AVX_X86_64 is not set CONFIG_CRYPTO_CAST6=y CONFIG_CRYPTO_CAST6_AVX_X86_64=y CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=y
# CONFIG_CRYPTO_KHAZAD is not set CONFIG_CRYPTO_SALSA20=y
# CONFIG_CRYPTO_SALSA20_X86_64 is not set CONFIG_CRYPTO_SEED=y
CONFIG_CRYPTO_SERPENT=y
# CONFIG_CRYPTO_SERPENT_SSE2_X86_64 is not set CONFIG_CRYPTO_SERPENT_AVX_X86_64=y CONFIG_CRYPTO_SERPENT_AVX2_X86_64=y
# CONFIG_CRYPTO_TEA is not set CONFIG_CRYPTO_TWOFISH=y CONFIG_CRYPTO_TWOFISH_COMMON=y CONFIG_CRYPTO_TWOFISH_X86_64=y CONFIG_CRYPTO_TWOFISH_X86_64_3WAY=y CONFIG_CRYPTO_TWOFISH_AVX_X86_64=y

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
# CONFIG_CRYPTO_LZ4 is not set
CONFIG_CRYPTO_LZ4HC=y

#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_USER_API=y
CONFIG_CRYPTO_USER_API_HASH=y
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
# CONFIG_CRYPTO_HW is not set
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_PUBLIC_KEY_ALGO_RSA=y
CONFIG_X509_CERTIFICATE_PARSER=y
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_IRQ_ROUTING=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_APIC_ARCHITECTURE=y
CONFIG_KVM_MMIO=y
CONFIG_KVM_ASYNC_PF=y
CONFIG_HAVE_KVM_MSI=y
CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=y
# CONFIG_KVM_INTEL is not set
CONFIG_KVM_AMD=y
# CONFIG_BINARY_PRINTF is not set

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_IO=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
CONFIG_CRC32_SELFTEST=y
# CONFIG_CRC32_SLICEBY8 is not set
CONFIG_CRC32_SLICEBY4=y
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
CONFIG_CRC7=y
CONFIG_LIBCRC32C=y
# CONFIG_CRC8 is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4HC_COMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_XZ_DEC=y
# CONFIG_XZ_DEC_X86 is not set
# CONFIG_XZ_DEC_POWERPC is not set
CONFIG_XZ_DEC_IA64=y
# CONFIG_XZ_DEC_ARM is not set
# CONFIG_XZ_DEC_ARMTHUMB is not set
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_REED_SOLOMON=y
CONFIG_REED_SOLOMON_DEC16=y
CONFIG_BTREE=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_CPUMASK_OFFSTACK=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_NLATTR=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
# CONFIG_AVERAGE is not set
CONFIG_CLZ_TAB=y
CONFIG_CORDIC=y
CONFIG_DDR=y
CONFIG_MPILIB=y
CONFIG_OID_REGISTRY=y

_______________________________________________
Xen-devel mailing list
[email protected]
http://lists.xen.org/xen-devel

#48 lore raw
In reply to Fengguang Wu
Quoted 11 lines · Fengguang Wu
[    2.785188] kobject: 'drm' (ffff880006dae048): kobject_release, parent ffff880000189648 (delayed)
[    2.787362] kobject: 'drm' (ffff880006dafe00): kobject_release, parent           (null) (delayed)
[    2.789674] [drm] radeon kernel modesetting enabled.
[    2.791798] [drm:drm_proc_init] *ERROR* Cannot create /proc/dri/0
[    2.793280] [drm:drm_get_minor] *ERROR* DRM: Failed to initialize /proc/dri.
[    2.795591] kobject: 'controlD64' (ffff880006dc3820): kobject_release, parent           (null) (delayed)
[    2.797988] cirrus: probe of 0000:00:02.0 failed with error -1
[    2.799675] usbcore: registered new interface driver udl
[    2.802167] parport_pc 00:04: reported by Plug and Play ACPI
[    2.803818] parport0: PC-style at 0x378, irq 7 [PCSPP(,...)]
[    2.806035] kobject: 'parport_pc.956' (ffff880006dc3820): kobject_release, parent           (null) (delayed)

Look very carefully at the above addresses of the controlD64 object and the parport_pc.956 object. They're both the same - and the first hasn't been run yet. It's a double addition because the culpret is not parport_pc, but is controlD64 instead.

And here we have it:

int drm_put_minor(struct drm_minor **minor_p)
{
...

        drm_sysfs_device_remove(minor);
...
        kfree(minor);
}

void drm_sysfs_device_remove(struct drm_minor *minor)

{
        if (minor->kdev.parent)
                device_unregister(&minor->kdev);
        minor->kdev.parent = NULL;
}

I think David Arlie also needs a quiet talking to about how to use the device model:

int drm_sysfs_device_add(struct drm_minor *minor)

{
        minor->kdev.release = drm_sysfs_device_release;
...
        err = device_register(&minor->kdev);
}

static void drm_sysfs_device_release(struct device *dev)

{
        memset(dev, 0, sizeof(struct device));
        return;
}

Since when has that been acceptable in a release function?

#49 lore raw
In reply to Fengguang Wu
Quoted 11 lines · Fengguang Wu
[    2.785188] kobject: 'drm' (ffff880006dae048): kobject_release, parent ffff880000189648 (delayed)
[    2.787362] kobject: 'drm' (ffff880006dafe00): kobject_release, parent           (null) (delayed)
[    2.789674] [drm] radeon kernel modesetting enabled.
[    2.791798] [drm:drm_proc_init] *ERROR* Cannot create /proc/dri/0
[    2.793280] [drm:drm_get_minor] *ERROR* DRM: Failed to initialize /proc/dri.
[    2.795591] kobject: 'controlD64' (ffff880006dc3820): kobject_release, parent           (null) (delayed)
[    2.797988] cirrus: probe of 0000:00:02.0 failed with error -1
[    2.799675] usbcore: registered new interface driver udl
[    2.802167] parport_pc 00:04: reported by Plug and Play ACPI
[    2.803818] parport0: PC-style at 0x378, irq 7 [PCSPP(,...)]
[    2.806035] kobject: 'parport_pc.956' (ffff880006dc3820): kobject_release, parent           (null) (delayed)

Look very carefully at the above addresses of the controlD64 object and the parport_pc.956 object. They're both the same - and the first hasn't been run yet. It's a double addition because the culpret is not parport_pc, but is controlD64 instead.

And here we have it:

int drm_put_minor(struct drm_minor **minor_p)
{
...

        drm_sysfs_device_remove(minor);
...
        kfree(minor);
}

void drm_sysfs_device_remove(struct drm_minor *minor)

{
        if (minor->kdev.parent)
                device_unregister(&minor->kdev);
        minor->kdev.parent = NULL;
}

I think David Arlie also needs a quiet talking to about how to use the device model:

int drm_sysfs_device_add(struct drm_minor *minor)

{
        minor->kdev.release = drm_sysfs_device_release;
...
        err = device_register(&minor->kdev);
}

static void drm_sysfs_device_release(struct device *dev)

{
        memset(dev, 0, sizeof(struct device));
        return;
}

Since when has that been acceptable in a release function?

#50 lore raw
Quoted 11 lines

I think David Arlie also needs a quiet talking to about how to use the device model:

int drm_sysfs_device_add(struct drm_minor *minor)

{
        minor->kdev.release = drm_sysfs_device_release;
...
        err = device_register(&minor->kdev);
}
Quoted 7 lines

static void drm_sysfs_device_release(struct device *dev)

{
        memset(dev, 0, sizeof(struct device));
        return;
}

Since when has that been acceptable in a release function?

Well the commit that added it had a reason that seems to cover some other device model abuses, so maybe someone who actually understands the device model (all 2 people) can review usage.

Dave.

commit 77d26dc9b9805f322f5a1f6e559b18ad66205bd9

Author: Ma Ling <[email protected]>
Date:   Thu Apr 16 17:51:25 2009 +0800

drm: clean dirty memory after device release

In current code we register/unregister connector object by drm_sysfs_connector_add/remove function.

However under some cases, we need to dynamically register or
unregister device

    multiple times, so we have to go through register -> unregister 

->register
routine.

Because after device_unregister function our memory is dirty, we need
to do
clean operation in order to re-register the device, otherwise the
system
will crash. The patch intends to clean device after device release.

#51 lore raw
In reply to Russell King - ARM Linux
Quoted 11 lines

I think David Arlie also needs a quiet talking to about how to use the device model:

int drm_sysfs_device_add(struct drm_minor *minor)

{
        minor->kdev.release = drm_sysfs_device_release;
...
        err = device_register(&minor->kdev);
}
Quoted 7 lines

static void drm_sysfs_device_release(struct device *dev)

{
        memset(dev, 0, sizeof(struct device));
        return;
}

Since when has that been acceptable in a release function?

Well the commit that added it had a reason that seems to cover some other device model abuses, so maybe someone who actually understands the device model (all 2 people) can review usage.

Dave.

commit 77d26dc9b9805f322f5a1f6e559b18ad66205bd9

Author: Ma Ling <[email protected]>
Date:   Thu Apr 16 17:51:25 2009 +0800

drm: clean dirty memory after device release

In current code we register/unregister connector object by drm_sysfs_connector_add/remove function.

However under some cases, we need to dynamically register or
unregister device

    multiple times, so we have to go through register -> unregister 

->register
routine.

Because after device_unregister function our memory is dirty, we need
to do
clean operation in order to re-register the device, otherwise the
system
will crash. The patch intends to clean device after device release.

#52 lore raw
Quoted 4 lines · Dave Airlie

Well the commit that added it had a reason that seems to cover some other device model abuses, so maybe someone who actually understands the device model (all 2 people) can review usage

Actually, I think it's the same bug.

You *cannot* just reuse the storage. Doing a "memset()" doesn't improve anything. The basic issue is that if you reuse it, you're buggy. End of story.

Why? It's refcounted, and it's out of your hands. Reusing it is wrong
- because it might still be used. The fact that you "released" it is immaterial. Others can have refcounts (and through /sys etc, historically really do have them).

Linus

#53 lore raw
In reply to Dave Airlie
Quoted 4 lines · Dave Airlie

Well the commit that added it had a reason that seems to cover some other device model abuses, so maybe someone who actually understands the device model (all 2 people) can review usage

Actually, I think it's the same bug.

You *cannot* just reuse the storage. Doing a "memset()" doesn't improve anything. The basic issue is that if you reuse it, you're buggy. End of story.

Why? It's refcounted, and it's out of your hands. Reusing it is wrong
- because it might still be used. The fact that you "released" it is immaterial. Others can have refcounts (and through /sys etc, historically really do have them).

Linus

#54 lore raw
In reply to Dave Airlie
Quoted 17 lines · Dave Airlie
Quoted 17 lines

I think David Arlie also needs a quiet talking to about how to use the device model:

int drm_sysfs_device_add(struct drm_minor *minor)

{
        minor->kdev.release = drm_sysfs_device_release;
...
        err = device_register(&minor->kdev);
}

static void drm_sysfs_device_release(struct device *dev)

{
        memset(dev, 0, sizeof(struct device));
        return;
}
Quoted 5 lines
Quoted 1 line

Since when has that been acceptable in a release function?

Well the commit that added it had a reason that seems to cover some other device model abuses, so maybe someone who actually understands the device model (all 2 people) can review usage.

Please - there's more than two people who understand this stuff.

You appear to manage to understand the refcounting principle for things like the DRM framebuffers, DRM buffer objects etc, and the driver model (and kobjects in general) are no different.

I've just been reading the code around here little more, and hit the usb implementation. I don't see how USB drivers get cleaned up when they're disconnected from the USB bus. I see drm_unplug_dev() which gets called on a USB disconnection (from udl/udl_drv.c) which effectively makes the device unavailable, but I don't see anything which frees anything. I see nothing calling drm_put_dev() here. How does the drm_device in this case get freed?

#55 lore raw
In reply to Dave Airlie
Quoted 17 lines · Dave Airlie
Quoted 17 lines

I think David Arlie also needs a quiet talking to about how to use the device model:

int drm_sysfs_device_add(struct drm_minor *minor)

{
        minor->kdev.release = drm_sysfs_device_release;
...
        err = device_register(&minor->kdev);
}

static void drm_sysfs_device_release(struct device *dev)

{
        memset(dev, 0, sizeof(struct device));
        return;
}
Quoted 5 lines
Quoted 1 line

Since when has that been acceptable in a release function?

Well the commit that added it had a reason that seems to cover some other device model abuses, so maybe someone who actually understands the device model (all 2 people) can review usage.

Please - there's more than two people who understand this stuff.

You appear to manage to understand the refcounting principle for things like the DRM framebuffers, DRM buffer objects etc, and the driver model (and kobjects in general) are no different.

I've just been reading the code around here little more, and hit the usb implementation. I don't see how USB drivers get cleaned up when they're disconnected from the USB bus. I see drm_unplug_dev() which gets called on a USB disconnection (from udl/udl_drv.c) which effectively makes the device unavailable, but I don't see anything which frees anything. I see nothing calling drm_put_dev() here. How does the drm_device in this case get freed?

#56 lore raw
Quoted 30 lines · Russell King - ARM Linux
Quoted 17 lines · Dave Airlie
Quoted 17 lines

I think David Arlie also needs a quiet talking to about how to use the device model:

int drm_sysfs_device_add(struct drm_minor *minor)

{
        minor->kdev.release = drm_sysfs_device_release;
...
        err = device_register(&minor->kdev);
}

static void drm_sysfs_device_release(struct device *dev)

{
        memset(dev, 0, sizeof(struct device));
        return;
}
Quoted 5 lines
Quoted 1 line

Since when has that been acceptable in a release function?

Well the commit that added it had a reason that seems to cover some other device model abuses, so maybe someone who actually understands the device model (all 2 people) can review usage.

Please - there's more than two people who understand this stuff.

You appear to manage to understand the refcounting principle for things like the DRM framebuffers, DRM buffer objects etc, and the driver model (and kobjects in general) are no different.

Quoted 7 lines

I've just been reading the code around here little more, and hit the usb implementation. I don't see how USB drivers get cleaned up when they're disconnected from the USB bus. I see drm_unplug_dev() which gets called on a USB disconnection (from udl/udl_drv.c) which effectively makes the device unavailable, but I don't see anything which frees anything. I see nothing calling drm_put_dev() here. How does the drm_device in this case get freed?

Don't worry about the above - I've worked out how USB works in that regard. However, I can't say that I like the feel of the code in drm_unplug_dev() and drm_put_dev() - if these two can run simultaneously in two threads of execution, there's the chance that things will go awry. I don't think that can happen due to the way the unplugged-ness is dealt with, but it doesn't "feel" safe.

I think something like the below may address the issue - I've only build tested this so far.

We have another case where DRM does the wrong thing here too - a similar thing goes on with connectors as well. I've not yet looked into this, but I'll take a look later today.

Fengguang - could you give this some runs through your marvellous test system and see whether it fixes the problem you're seeing please?

David - maybe you can find some time to look at the Armada driver I re-posted last weekend?

 drivers/gpu/drm/drm_stub.c  |    8 +++++---
 drivers/gpu/drm/drm_sysfs.c |   42 +++++++++++++++++++++++++++++++++---------
 include/drm/drmP.h          |    1 +
 3 files changed, 39 insertions(+), 12 deletions(-)
drivers/gpu/drm/drm_stub.c +5 -3
index 39d8645..1a837e1 100644
@@ -396,6 +396,7 @@ EXPORT_SYMBOL(drm_get_minor);
 int drm_put_minor(struct drm_minor **minor_p)
 {
 	struct drm_minor *minor = *minor_p;
+	int minor_id = minor->index;
 
 	DRM_DEBUG("release secondary minor %d\n", minor->index);
 
@@ -403,11 +404,12 @@ int drm_put_minor(struct drm_minor **minor_p)
 	drm_debugfs_cleanup(minor);
 #endif
 
-	drm_sysfs_device_remove(minor);
+	if (!drm_device_is_unplugged(minor->dev))
+		drm_sysfs_device_remove(minor);
 
-	idr_remove(&drm_minors_idr, minor->index);
+	idr_remove(&drm_minors_idr, minor_id);
 
-	kfree(minor);
+	drm_sysfs_device_put(minor);
 	*minor_p = NULL;
 	return 0;
 }
drivers/gpu/drm/drm_sysfs.c +33 -9

70 lines not on this page · raw message

include/drm/drmP.h +1 -0
index b46fb45..57ae052 100644
@@ -1548,6 +1548,7 @@ extern void drm_sysfs_destroy(void);
 extern int drm_sysfs_device_add(struct drm_minor *minor);
 extern void drm_sysfs_hotplug_event(struct drm_device *dev);
 extern void drm_sysfs_device_remove(struct drm_minor *minor);
+extern void drm_sysfs_device_put(struct drm_minor *minor);
 extern int drm_sysfs_connector_add(struct drm_connector *connector);
 extern void drm_sysfs_connector_remove(struct drm_connector *connector);
#57 lore raw
In reply to Russell King - ARM Linux
Quoted 30 lines · Russell King - ARM Linux
Quoted 17 lines · Dave Airlie
Quoted 17 lines

I think David Arlie also needs a quiet talking to about how to use the device model:

int drm_sysfs_device_add(struct drm_minor *minor)

{
        minor->kdev.release = drm_sysfs_device_release;
...
        err = device_register(&minor->kdev);
}

static void drm_sysfs_device_release(struct device *dev)

{
        memset(dev, 0, sizeof(struct device));
        return;
}
Quoted 5 lines
Quoted 1 line

Since when has that been acceptable in a release function?

Well the commit that added it had a reason that seems to cover some other device model abuses, so maybe someone who actually understands the device model (all 2 people) can review usage.

Please - there's more than two people who understand this stuff.

You appear to manage to understand the refcounting principle for things like the DRM framebuffers, DRM buffer objects etc, and the driver model (and kobjects in general) are no different.

Quoted 7 lines

I've just been reading the code around here little more, and hit the usb implementation. I don't see how USB drivers get cleaned up when they're disconnected from the USB bus. I see drm_unplug_dev() which gets called on a USB disconnection (from udl/udl_drv.c) which effectively makes the device unavailable, but I don't see anything which frees anything. I see nothing calling drm_put_dev() here. How does the drm_device in this case get freed?

Don't worry about the above - I've worked out how USB works in that regard. However, I can't say that I like the feel of the code in drm_unplug_dev() and drm_put_dev() - if these two can run simultaneously in two threads of execution, there's the chance that things will go awry. I don't think that can happen due to the way the unplugged-ness is dealt with, but it doesn't "feel" safe.

I think something like the below may address the issue - I've only build tested this so far.

We have another case where DRM does the wrong thing here too - a similar thing goes on with connectors as well. I've not yet looked into this, but I'll take a look later today.

Fengguang - could you give this some runs through your marvellous test system and see whether it fixes the problem you're seeing please?

David - maybe you can find some time to look at the Armada driver I re-posted last weekend?

 drivers/gpu/drm/drm_stub.c  |    8 +++++---
 drivers/gpu/drm/drm_sysfs.c |   42 +++++++++++++++++++++++++++++++++---------
 include/drm/drmP.h          |    1 +
 3 files changed, 39 insertions(+), 12 deletions(-)
drivers/gpu/drm/drm_stub.c +5 -3
index 39d8645..1a837e1 100644
@@ -396,6 +396,7 @@ EXPORT_SYMBOL(drm_get_minor);
 int drm_put_minor(struct drm_minor **minor_p)
 {
 	struct drm_minor *minor = *minor_p;
+	int minor_id = minor->index;
 
 	DRM_DEBUG("release secondary minor %d\n", minor->index);
 
@@ -403,11 +404,12 @@ int drm_put_minor(struct drm_minor **minor_p)
 	drm_debugfs_cleanup(minor);
 #endif
 
-	drm_sysfs_device_remove(minor);
+	if (!drm_device_is_unplugged(minor->dev))
+		drm_sysfs_device_remove(minor);
 
-	idr_remove(&drm_minors_idr, minor->index);
+	idr_remove(&drm_minors_idr, minor_id);
 
-	kfree(minor);
+	drm_sysfs_device_put(minor);
 	*minor_p = NULL;
 	return 0;
 }
drivers/gpu/drm/drm_sysfs.c +33 -9

70 lines not on this page · raw message

include/drm/drmP.h +1 -0
index b46fb45..57ae052 100644
@@ -1548,6 +1548,7 @@ extern void drm_sysfs_destroy(void);
 extern int drm_sysfs_device_add(struct drm_minor *minor);
 extern void drm_sysfs_hotplug_event(struct drm_device *dev);
 extern void drm_sysfs_device_remove(struct drm_minor *minor);
+extern void drm_sysfs_device_put(struct drm_minor *minor);
 extern int drm_sysfs_connector_add(struct drm_connector *connector);
 extern void drm_sysfs_connector_remove(struct drm_connector *connector);
 
maintainer
#58 lore raw
Quoted 46 lines · Russell King - ARM Linux
Quoted 30 lines · Russell King - ARM Linux
Quoted 17 lines · Dave Airlie
Quoted 17 lines

I think David Arlie also needs a quiet talking to about how to use the device model:

int drm_sysfs_device_add(struct drm_minor *minor)

{
        minor->kdev.release = drm_sysfs_device_release;
...
        err = device_register(&minor->kdev);
}

static void drm_sysfs_device_release(struct device *dev)

{
        memset(dev, 0, sizeof(struct device));
        return;
}
Quoted 5 lines
Quoted 1 line

Since when has that been acceptable in a release function?

Well the commit that added it had a reason that seems to cover some other device model abuses, so maybe someone who actually understands the device model (all 2 people) can review usage.

Please - there's more than two people who understand this stuff.

You appear to manage to understand the refcounting principle for things like the DRM framebuffers, DRM buffer objects etc, and the driver model (and kobjects in general) are no different.

Quoted 7 lines

I've just been reading the code around here little more, and hit the usb implementation. I don't see how USB drivers get cleaned up when they're disconnected from the USB bus. I see drm_unplug_dev() which gets called on a USB disconnection (from udl/udl_drv.c) which effectively makes the device unavailable, but I don't see anything which frees anything. I see nothing calling drm_put_dev() here. How does the drm_device in this case get freed?

Don't worry about the above - I've worked out how USB works in that regard. However, I can't say that I like the feel of the code in drm_unplug_dev() and drm_put_dev() - if these two can run simultaneously in two threads of execution, there's the chance that things will go awry. I don't think that can happen due to the way the unplugged-ness is dealt with, but it doesn't "feel" safe.

Quoted 7 lines

I think something like the below may address the issue - I've only build tested this so far.

We have another case where DRM does the wrong thing here too - a similar thing goes on with connectors as well. I've not yet looked into this, but I'll take a look later today.

Damn gmail screwed up my reply-all,

anyhoo I get the feeling I'd rather do this like fbdev does and stop using an embedded kdev for this if I can. The lifetime of the minor and the sysfs objects aren't necessarily that tied together esp with hot unplug of USB devices.

e.g. when a USB device goes away I don't want the sysfs files to remain hanging around,
or the userspace device nodes, however I can't remove all the internal driver state until userspace finally closes all open device files,

I think this is a bit of a bad misdesign of the whole device api that sysfs exposure and device exposure is tied
to objects you are encourgaged to embed.

I think maybe I'll just copy fbdev and do a separate device_create with a nonembedded dev.

Dave.

maintainer
#59 lore raw
Quoted 13 lines

Damn gmail screwed up my reply-all,

anyhoo I get the feeling I'd rather do this like fbdev does and stop using an embedded kdev for this if I can. The lifetime of the minor and the sysfs objects aren't necessarily that tied together esp with hot unplug of USB devices.

e.g. when a USB device goes away I don't want the sysfs files to remain hanging around,
or the userspace device nodes, however I can't remove all the internal driver state until userspace finally closes all open device files,

Quoted 7 lines

I think this is a bit of a bad misdesign of the whole device api that sysfs exposure and device exposure is tied
to objects you are encourgaged to embed.

I think maybe I'll just copy fbdev and do a separate device_create with a nonembedded dev.

Okay it compiles but not boot tested yet.,attached as well just in case gmail eats it.

Quoted 1 line

From be06235b2d2a26c0e52c099e70922b71f1245b9e Mon Sep 17 00:00:00 2001

From: Dave Airlie <[email protected]>
Date: Fri, 11 Oct 2013 14:07:25 +1000
Subject: [PATCH] drm/sysfs: sort out minor and connector device object
lifetimes.

So drm was abusing device lifetimes, by having embedded device structures in the minor and connector it meant that the lifetime of the internal drm objects (drm_minor and drm_connector) were tied to the lifetime of the device files in sysfs, so if something kept those files opened the current code would kfree the objects and things would go downhill from there.

Now in reality there is no need for these lifetimes to be so intertwined, especailly with hotplugging of devices where we wish to remove the sysfs and userspace facing pieces before we can unwind the internal objects due to open userspace files or mmaps, so split the objects out so the struct device is no longer embedded and do what fbdev does and just allocate and remove the sysfs inodes separately.

---
 drivers/gpu/drm/drm_sysfs.c       | 94 ++++++++++++++-------------------------
 drivers/gpu/drm/i915/i915_irq.c   |  8 ++--
 drivers/gpu/drm/i915/i915_sysfs.c | 28 ++++++------
 include/drm/drmP.h                |  2 +-
 include/drm/drm_crtc.h            |  2 +-
 5 files changed, 54 insertions(+), 80 deletions(-)
drivers/gpu/drm/drm_sysfs.c +2 -16
index 2290b3b..dae42c7 100644
@@ -22,8 +22,8 @@
 #include <drm/drm_core.h>
 #include <drm/drmP.h>
 
-#define to_drm_minor(d) container_of(d, struct drm_minor, kdev)
-#define to_drm_connector(d) container_of(d, struct drm_connector, kdev)
+#define to_drm_minor(d) dev_get_drvdata(d)
+#define to_drm_connector(d) dev_get_drvdata(d)
 
 static struct device_type drm_sysfs_device_minor = {
     .name = "drm_minor"
@@ -162,20 +162,6 @@ void drm_sysfs_destroy(void)
     drm_class = NULL;
 }
 
-/**
- * drm_sysfs_device_release - do nothing
- * @dev: Linux device
- *
- * Normally, this would free the DRM device associated with @dev, along
- * with cleaning up any other stuff.  But we do that in the DRM core, so
- * this function can just return and hope that the core does its job.
- */
-static void drm_sysfs_device_release(struct device *dev)
-{
-    memset(dev, 0, sizeof(struct device));
-    return;
-}
-
 /*
  * Connector properties
  */
@@ -394,29 +380,26 @@ int drm_sysfs_connector_add(struct drm_connector

*connector)

     int i;
     int ret;

- /* We shouldn't get called more than once for the same connector */
- BUG_ON(device_is_registered(&connector->kdev));
-

-    connector->kdev.parent = &dev->primary->kdev;
-    connector->kdev.class = drm_class;
-    connector->kdev.release = drm_sysfs_device_release;
+    if (connector->kdev)

+ return 0;

+ /* We shouldn't get called more than once for the same connector */
+ connector->kdev = device_create(drm_class, dev->primary->kdev,
+ 0, connector, "card%d-%s",

+                    dev->primary->index, drm_get_connector_name(connector));
     DRM_DEBUG("adding \"%s\" to sysfs\n",
           drm_get_connector_name(connector));

- dev_set_name(&connector->kdev, "card%d-%s",
- dev->primary->index, drm_get_connector_name(connector));
- ret = device_register(&connector->kdev);
-
- if (ret) {
- DRM_ERROR("failed to register connector device: %d\n", ret);
+ if (IS_ERR(connector->kdev)) {
+ DRM_ERROR("failed to register connector device: %ld\n",
PTR_ERR(connector->kdev));

+        ret = PTR_ERR(connector->kdev);
         goto out;
     }

     /* Standard attributes */

     for (attr_cnt = 0; attr_cnt < ARRAY_SIZE(connector_attrs); attr_cnt++) {
-        ret = device_create_file(&connector->kdev, &connector_attrs[attr_cnt]);
+        ret = device_create_file(connector->kdev, &connector_attrs[attr_cnt]);
         if (ret)
             goto err_out_files;
     }
@@ -433,7 +416,7 @@ int drm_sysfs_connector_add(struct drm_connector *connector)
         case DRM_MODE_CONNECTOR_Component:
         case DRM_MODE_CONNECTOR_TV:
             for (opt_cnt = 0; opt_cnt <

ARRAY_SIZE(connector_attrs_opt1); opt_cnt++) {
- ret = device_create_file(&connector->kdev,
&connector_attrs_opt1[opt_cnt]);
+ ret = device_create_file(connector->kdev,

&connector_attrs_opt1[opt_cnt]);
                 if (ret)
                     goto err_out_files;
             }
@@ -442,7 +425,7 @@ int drm_sysfs_connector_add(struct drm_connector *connector)
             break;
     }

- ret = sysfs_create_bin_file(&connector->kdev.kobj, &edid_attr);

+    ret = sysfs_create_bin_file(&connector->kdev->kobj, &edid_attr);
     if (ret)
         goto err_out_files;

@@ -453,10 +436,11 @@ int drm_sysfs_connector_add(struct drm_connector *connector)

err_out_files:

     for (i = 0; i < opt_cnt; i++)
-        device_remove_file(&connector->kdev, &connector_attrs_opt1[i]);
+        device_remove_file(connector->kdev, &connector_attrs_opt1[i]);
     for (i = 0; i < attr_cnt; i++)

- device_remove_file(&connector->kdev, &connector_attrs[i]);
- device_unregister(&connector->kdev);
+ device_remove_file(connector->kdev, &connector_attrs[i]);
+ put_device(connector->kdev);
+ device_unregister(connector->kdev);

out:

     return ret;
@@ -480,16 +464,17 @@ void drm_sysfs_connector_remove(struct
drm_connector *connector)
 {
     int i;

- if (!connector->kdev.parent)
+ if (!connector->kdev)

         return;
     DRM_DEBUG("removing \"%s\" from sysfs\n",
           drm_get_connector_name(connector));

     for (i = 0; i < ARRAY_SIZE(connector_attrs); i++)
-        device_remove_file(&connector->kdev, &connector_attrs[i]);
-    sysfs_remove_bin_file(&connector->kdev.kobj, &edid_attr);
-    device_unregister(&connector->kdev);
-    connector->kdev.parent = NULL;
+        device_remove_file(connector->kdev, &connector_attrs[i]);
+    sysfs_remove_bin_file(&connector->kdev->kobj, &edid_attr);
+    put_device(connector->kdev);
+    device_unregister(connector->kdev);
+    connector->kdev = NULL;

}
EXPORT_SYMBOL(drm_sysfs_connector_remove);

@@ -508,7 +493,7 @@ void drm_sysfs_hotplug_event(struct drm_device *dev)

     DRM_DEBUG("generating hotplug event\n");

- kobject_uevent_env(&dev->primary->kdev.kobj, KOBJ_CHANGE, envp);
+ kobject_uevent_env(&dev->primary->kdev->kobj, KOBJ_CHANGE, envp);
}
EXPORT_SYMBOL(drm_sysfs_hotplug_event);

@@ -523,15 +508,8 @@ EXPORT_SYMBOL(drm_sysfs_hotplug_event);
*/
int drm_sysfs_device_add(struct drm_minor *minor) {

-    int err;
     char *minor_str;

- minor->kdev.parent = minor->dev->dev;
-

-    minor->kdev.class = drm_class;
-    minor->kdev.release = drm_sysfs_device_release;
-    minor->kdev.devt = minor->device;
-    minor->kdev.type = &drm_sysfs_device_minor;
     if (minor->type == DRM_MINOR_CONTROL)
         minor_str = "controlD%d";
         else if (minor->type == DRM_MINOR_RENDER)
@@ -539,18 +517,14 @@ int drm_sysfs_device_add(struct drm_minor *minor)
         else
                 minor_str = "card%d";

- dev_set_name(&minor->kdev, minor_str, minor->index);
-
- err = device_register(&minor->kdev);
- if (err) {
- DRM_ERROR("device add failed: %d\n", err);
- goto err_out;
+ minor->kdev = device_create(drm_class, minor->dev->dev,
+ MKDEV(DRM_MAJOR, minor->index),
+ minor, minor_str, minor->index);
+ if (IS_ERR(minor->kdev)) {
+ DRM_ERROR("device create failed %ld\n", PTR_ERR(minor->kdev));

+        return PTR_ERR(minor->kdev);
     }
-
     return 0;

-
-err_out:
- return err;
}

/**
@@ -562,9 +536,9 @@ err_out:
*/
void drm_sysfs_device_remove(struct drm_minor *minor) {
- if (minor->kdev.parent)
- device_unregister(&minor->kdev);
- minor->kdev.parent = NULL;
+ if (minor->kdev)
+ device_destroy(drm_class, MKDEV(DRM_MAJOR, minor->index));
+ minor->kdev = NULL;
}

drivers/gpu/drm/i915/i915_irq.c +1 -1
index b356dc1..8d133bf 100644
@@ -933,7 +933,7 @@ static void ivybridge_parity_work(struct work_struct *work)
         parity_event[4] = kasprintf(GFP_KERNEL, "SLICE=%d", slice);
         parity_event[5] = NULL;
 
-        kobject_uevent_env(&dev_priv->dev->primary->kdev.kobj,
+        kobject_uevent_env(&dev_priv->dev->primary->kdev->kobj,
                    KOBJ_CHANGE, parity_event);
 
         DRM_DEBUG("Parity error: Slice = %d, Row = %d, Bank = %d, Sub

bank = %d.\n",
@@ -1530,7 +1530,7 @@ static void i915_error_work_func(struct work_struct *work)

     char *reset_done_event[] = { I915_ERROR_UEVENT "=0", NULL };
     int ret;

- kobject_uevent_env(&dev->primary->kdev.kobj, KOBJ_CHANGE, error_event);
+ kobject_uevent_env(&dev->primary->kdev->kobj, KOBJ_CHANGE, error_event);

/*
* Note that there's only one work item which does gpu resets, so we
@@ -1544,7 +1544,7 @@ static void i915_error_work_func(struct work_struct *work)

      */
     if (i915_reset_in_progress(error) && !i915_terminally_wedged(error)) {
         DRM_DEBUG_DRIVER("resetting chip\n");
-        kobject_uevent_env(&dev->primary->kdev.kobj, KOBJ_CHANGE,
+        kobject_uevent_env(&dev->primary->kdev->kobj, KOBJ_CHANGE,
                    reset_event);

         /*
@@ -1571,7 +1571,7 @@ static void i915_error_work_func(struct work_struct *work)
             smp_mb__before_atomic_inc();
             atomic_inc(&dev_priv->gpu_error.reset_counter);

- kobject_uevent_env(&dev->primary->kdev.kobj,
+ kobject_uevent_env(&dev->primary->kdev->kobj,

                        KOBJ_CHANGE, reset_done_event);
         } else {
             atomic_set(&error->reset_counter, I915_WEDGED);
(quoted diff) +0 -0

b/drivers/gpu/drm/i915/i915_sysfs.c
index 44f4c1a..868aed8 100644

drivers/gpu/drm/i915/i915_sysfs.c +0 -0
@@ -48,14 +48,14 @@ static u32 calc_residency(struct drm_device *dev,

const u32 reg)
static ssize_t
show_rc6_mask(struct device *kdev, struct device_attribute *attr, char *buf) {
- struct drm_minor *dminor = container_of(kdev, struct drm_minor, kdev);

+    struct drm_minor *dminor = dev_get_drvdata(kdev);
     return snprintf(buf, PAGE_SIZE, "%x\n", intel_enable_rc6(dminor->dev));

}

static ssize_t
show_rc6_ms(struct device *kdev, struct device_attribute *attr, char *buf) {
- struct drm_minor *dminor = container_of(kdev, struct drm_minor, kdev);

+    struct drm_minor *dminor = dev_get_drvdata(kdev);
     u32 rc6_residency = calc_residency(dminor->dev, GEN6_GT_GFX_RC6);
     return snprintf(buf, PAGE_SIZE, "%u\n", rc6_residency);

}
@@ -63,7 +63,7 @@ show_rc6_ms(struct device *kdev, struct device_attribute *attr, char *buf)
static ssize_t
show_rc6p_ms(struct device *kdev, struct device_attribute *attr, char *buf) {
- struct drm_minor *dminor = container_of(kdev, struct drm_minor, kdev);

+    struct drm_minor *dminor = dev_get_drvdata(kdev);
     u32 rc6p_residency = calc_residency(dminor->dev, GEN6_GT_GFX_RC6p);
     if (IS_VALLEYVIEW(dminor->dev))
         rc6p_residency = 0;

@@ -73,7 +73,7 @@ show_rc6p_ms(struct device *kdev, struct device_attribute *attr, char *buf)
static ssize_t
show_rc6pp_ms(struct device *kdev, struct device_attribute *attr, char *buf) {
- struct drm_minor *dminor = container_of(kdev, struct drm_minor, kdev);

+    struct drm_minor *dminor = dev_get_drvdata(kdev);
     u32 rc6pp_residency = calc_residency(dminor->dev, GEN6_GT_GFX_RC6pp);
     if (IS_VALLEYVIEW(dminor->dev))
         rc6pp_residency = 0;
@@ -119,7 +119,7 @@ i915_l3_read(struct file *filp, struct kobject *kobj,
          loff_t offset, size_t count)
 {
     struct device *dev = container_of(kobj, struct device, kobj);
-    struct drm_minor *dminor = container_of(dev, struct drm_minor, kdev);
+    struct drm_minor *dminor = dev_get_drvdata(dev);
     struct drm_device *drm_dev = dminor->dev;
     struct drm_i915_private *dev_priv = drm_dev->dev_private;
     int slice = (int)(uintptr_t)attr->private;
@@ -155,7 +155,7 @@ i915_l3_write(struct file *filp, struct kobject *kobj,
           loff_t offset, size_t count)
 {
     struct device *dev = container_of(kobj, struct device, kobj);
-    struct drm_minor *dminor = container_of(dev, struct drm_minor, kdev);
+    struct drm_minor *dminor = dev_get_drvdata(dev);
     struct drm_device *drm_dev = dminor->dev;
     struct drm_i915_private *dev_priv = drm_dev->dev_private;
     struct i915_hw_context *ctx;

@@ -523,7 +523,7 @@ void i915_setup_sysfs(struct drm_device *dev)

 #ifdef CONFIG_PM
     if (INTEL_INFO(dev)->gen >= 6) {
-        ret = sysfs_merge_group(&dev->primary->kdev.kobj,
+        ret = sysfs_merge_group(&dev->primary->kdev->kobj,
                     &rc6_attr_group);
         if (ret)
             DRM_ERROR("RC6 residency sysfs setup failed\n");

@@ -544,13 +544,13 @@ void i915_setup_sysfs(struct drm_device *dev)

     ret = 0;
     if (IS_VALLEYVIEW(dev))
-        ret = sysfs_create_files(&dev->primary->kdev.kobj, vlv_attrs);
+        ret = sysfs_create_files(&dev->primary->kdev->kobj, vlv_attrs);
     else if (INTEL_INFO(dev)->gen >= 6)
-        ret = sysfs_create_files(&dev->primary->kdev.kobj, gen6_attrs);
+        ret = sysfs_create_files(&dev->primary->kdev->kobj, gen6_attrs);
     if (ret)
         DRM_ERROR("RPS sysfs setup failed\n");

- ret = sysfs_create_bin_file(&dev->primary->kdev.kobj,
+ ret = sysfs_create_bin_file(&dev->primary->kdev->kobj,

                     &error_state_attr);
     if (ret)
         DRM_ERROR("error_state sysfs setup failed\n");

@@ -558,14 +558,14 @@ void i915_setup_sysfs(struct drm_device *dev)

void i915_teardown_sysfs(struct drm_device *dev)
{
- sysfs_remove_bin_file(&dev->primary->kdev.kobj, &error_state_attr);
+ sysfs_remove_bin_file(&dev->primary->kdev->kobj, &error_state_attr);
if (IS_VALLEYVIEW(dev))
- sysfs_remove_files(&dev->primary->kdev.kobj, vlv_attrs);
+ sysfs_remove_files(&dev->primary->kdev->kobj, vlv_attrs);
else
- sysfs_remove_files(&dev->primary->kdev.kobj, gen6_attrs);

+        sysfs_remove_files(&dev->primary->kdev->kobj, gen6_attrs);
     device_remove_bin_file(&dev->primary->kdev,  &dpf_attrs_1);
     device_remove_bin_file(&dev->primary->kdev,  &dpf_attrs);

#ifdef CONFIG_PM
- sysfs_unmerge_group(&dev->primary->kdev.kobj, &rc6_attr_group);
+ sysfs_unmerge_group(&dev->primary->kdev->kobj, &rc6_attr_group);
#endif
}

include/drm/drmP.h +1 -1
index 9ba6a38..33eaba6 100644
@@ -1043,7 +1043,7 @@ struct drm_minor {
     int index;            /**< Minor device number */
     int type;                       /**< Control or render */
     dev_t device;            /**< Device number for mknod */
-    struct device kdev;        /**< Linux device */
+    struct device *kdev;        /**< Linux device */
     struct drm_device *dev;
 
     struct dentry *debugfs_root;
include/drm/drm_crtc.h +1 -1
index 92e7820..c7ce4e2 100644
@@ -587,7 +587,7 @@ enum drm_connector_force {
  */
 struct drm_connector {
     struct drm_device *dev;
-    struct device kdev;
+    struct device *kdev;
     struct device_attribute *attr;
     struct list_head head;
 
Signature · 1 line
1.8.3.1

From be06235b2d2a26c0e52c099e70922b71f1245b9e Mon Sep 17 00:00:00 2001
From: Dave Airlie <[email protected]>
Date: Fri, 11 Oct 2013 14:07:25 +1000
Subject: [PATCH] drm/sysfs: sort out minor and connector device object
lifetimes.

So drm was abusing device lifetimes, by having embedded device structures in the minor and connector it meant that the lifetime of the internal drm objects (drm_minor and drm_connector) were tied to the lifetime of the device files in sysfs, so if something kept those files opened the current code would kfree the objects and things would go downhill from there.

Now in reality there is no need for these lifetimes to be so intertwined, especailly with hotplugging of devices where we wish to remove the sysfs and userspace facing pieces before we can unwind the internal objects due to open userspace files or mmaps, so split the objects out so the struct device is no longer embedded and do what fbdev does and just allocate and remove the sysfs inodes separately.

---
 drivers/gpu/drm/drm_sysfs.c       | 94 ++++++++++++++-------------------------
 drivers/gpu/drm/i915/i915_irq.c   |  8 ++--
 drivers/gpu/drm/i915/i915_sysfs.c | 28 ++++++------
 include/drm/drmP.h                |  2 +-
 include/drm/drm_crtc.h            |  2 +-
 5 files changed, 54 insertions(+), 80 deletions(-)
drivers/gpu/drm/drm_sysfs.c +34 -60

180 lines not on this page · raw message

drivers/gpu/drm/i915/i915_irq.c +4 -4
index b356dc1..8d133bf 100644
@@ -933,7 +933,7 @@ static void ivybridge_parity_work(struct work_struct *work)
 		parity_event[4] = kasprintf(GFP_KERNEL, "SLICE=%d", slice);
 		parity_event[5] = NULL;
 
-		kobject_uevent_env(&dev_priv->dev->primary->kdev.kobj,
+		kobject_uevent_env(&dev_priv->dev->primary->kdev->kobj,
 				   KOBJ_CHANGE, parity_event);
 
 		DRM_DEBUG("Parity error: Slice = %d, Row = %d, Bank = %d, Sub bank = %d.\n",
@@ -1530,7 +1530,7 @@ static void i915_error_work_func(struct work_struct *work)
 	char *reset_done_event[] = { I915_ERROR_UEVENT "=0", NULL };
 	int ret;
 
-	kobject_uevent_env(&dev->primary->kdev.kobj, KOBJ_CHANGE, error_event);
+	kobject_uevent_env(&dev->primary->kdev->kobj, KOBJ_CHANGE, error_event);
 
 	/*
 	 * Note that there's only one work item which does gpu resets, so we
@@ -1544,7 +1544,7 @@ static void i915_error_work_func(struct work_struct *work)
 	 */
 	if (i915_reset_in_progress(error) && !i915_terminally_wedged(error)) {
 		DRM_DEBUG_DRIVER("resetting chip\n");
-		kobject_uevent_env(&dev->primary->kdev.kobj, KOBJ_CHANGE,
+		kobject_uevent_env(&dev->primary->kdev->kobj, KOBJ_CHANGE,
 				   reset_event);
 
 		/*
@@ -1571,7 +1571,7 @@ static void i915_error_work_func(struct work_struct *work)
 			smp_mb__before_atomic_inc();
 			atomic_inc(&dev_priv->gpu_error.reset_counter);
 
-			kobject_uevent_env(&dev->primary->kdev.kobj,
+			kobject_uevent_env(&dev->primary->kdev->kobj,
 					   KOBJ_CHANGE, reset_done_event);
 		} else {
 			atomic_set(&error->reset_counter, I915_WEDGED);
drivers/gpu/drm/i915/i915_sysfs.c +14 -14
index 44f4c1a..868aed8 100644
@@ -48,14 +48,14 @@ static u32 calc_residency(struct drm_device *dev, const u32 reg)
 static ssize_t
 show_rc6_mask(struct device *kdev, struct device_attribute *attr, char *buf)
 {
-	struct drm_minor *dminor = container_of(kdev, struct drm_minor, kdev);
+	struct drm_minor *dminor = dev_get_drvdata(kdev);
 	return snprintf(buf, PAGE_SIZE, "%x\n", intel_enable_rc6(dminor->dev));
 }
 
 static ssize_t
 show_rc6_ms(struct device *kdev, struct device_attribute *attr, char *buf)
 {
-	struct drm_minor *dminor = container_of(kdev, struct drm_minor, kdev);
+	struct drm_minor *dminor = dev_get_drvdata(kdev);
 	u32 rc6_residency = calc_residency(dminor->dev, GEN6_GT_GFX_RC6);
 	return snprintf(buf, PAGE_SIZE, "%u\n", rc6_residency);
 }
@@ -63,7 +63,7 @@ show_rc6_ms(struct device *kdev, struct device_attribute *attr, char *buf)
 static ssize_t
 show_rc6p_ms(struct device *kdev, struct device_attribute *attr, char *buf)
 {
-	struct drm_minor *dminor = container_of(kdev, struct drm_minor, kdev);
+	struct drm_minor *dminor = dev_get_drvdata(kdev);
 	u32 rc6p_residency = calc_residency(dminor->dev, GEN6_GT_GFX_RC6p);
 	if (IS_VALLEYVIEW(dminor->dev))
 		rc6p_residency = 0;
@@ -73,7 +73,7 @@ show_rc6p_ms(struct device *kdev, struct device_attribute *attr, char *buf)
 static ssize_t
 show_rc6pp_ms(struct device *kdev, struct device_attribute *attr, char *buf)
 {
-	struct drm_minor *dminor = container_of(kdev, struct drm_minor, kdev);
+	struct drm_minor *dminor = dev_get_drvdata(kdev);
 	u32 rc6pp_residency = calc_residency(dminor->dev, GEN6_GT_GFX_RC6pp);
 	if (IS_VALLEYVIEW(dminor->dev))
 		rc6pp_residency = 0;
@@ -119,7 +119,7 @@ i915_l3_read(struct file *filp, struct kobject *kobj,
 	     loff_t offset, size_t count)
 {
 	struct device *dev = container_of(kobj, struct device, kobj);
-	struct drm_minor *dminor = container_of(dev, struct drm_minor, kdev);
+	struct drm_minor *dminor = dev_get_drvdata(dev);
 	struct drm_device *drm_dev = dminor->dev;
 	struct drm_i915_private *dev_priv = drm_dev->dev_private;
 	int slice = (int)(uintptr_t)attr->private;
@@ -155,7 +155,7 @@ i915_l3_write(struct file *filp, struct kobject *kobj,
 	      loff_t offset, size_t count)
 {
 	struct device *dev = container_of(kobj, struct device, kobj);
-	struct drm_minor *dminor = container_of(dev, struct drm_minor, kdev);
+	struct drm_minor *dminor = dev_get_drvdata(dev);
 	struct drm_device *drm_dev = dminor->dev;
 	struct drm_i915_private *dev_priv = drm_dev->dev_private;
 	struct i915_hw_context *ctx;
@@ -523,7 +523,7 @@ void i915_setup_sysfs(struct drm_device *dev)
 
 #ifdef CONFIG_PM
 	if (INTEL_INFO(dev)->gen >= 6) {
-		ret = sysfs_merge_group(&dev->primary->kdev.kobj,
+		ret = sysfs_merge_group(&dev->primary->kdev->kobj,
 					&rc6_attr_group);
 		if (ret)
 			DRM_ERROR("RC6 residency sysfs setup failed\n");
@@ -544,13 +544,13 @@ void i915_setup_sysfs(struct drm_device *dev)
 
 	ret = 0;
 	if (IS_VALLEYVIEW(dev))
-		ret = sysfs_create_files(&dev->primary->kdev.kobj, vlv_attrs);
+		ret = sysfs_create_files(&dev->primary->kdev->kobj, vlv_attrs);
 	else if (INTEL_INFO(dev)->gen >= 6)
-		ret = sysfs_create_files(&dev->primary->kdev.kobj, gen6_attrs);
+		ret = sysfs_create_files(&dev->primary->kdev->kobj, gen6_attrs);
 	if (ret)
 		DRM_ERROR("RPS sysfs setup failed\n");
 
-	ret = sysfs_create_bin_file(&dev->primary->kdev.kobj,
+	ret = sysfs_create_bin_file(&dev->primary->kdev->kobj,
 				    &error_state_attr);
 	if (ret)
 		DRM_ERROR("error_state sysfs setup failed\n");
@@ -558,14 +558,14 @@ void i915_setup_sysfs(struct drm_device *dev)
 
 void i915_teardown_sysfs(struct drm_device *dev)
 {
-	sysfs_remove_bin_file(&dev->primary->kdev.kobj, &error_state_attr);
+	sysfs_remove_bin_file(&dev->primary->kdev->kobj, &error_state_attr);
 	if (IS_VALLEYVIEW(dev))
-		sysfs_remove_files(&dev->primary->kdev.kobj, vlv_attrs);
+		sysfs_remove_files(&dev->primary->kdev->kobj, vlv_attrs);
 	else
-		sysfs_remove_files(&dev->primary->kdev.kobj, gen6_attrs);
+		sysfs_remove_files(&dev->primary->kdev->kobj, gen6_attrs);
 	device_remove_bin_file(&dev->primary->kdev,  &dpf_attrs_1);
 	device_remove_bin_file(&dev->primary->kdev,  &dpf_attrs);
 #ifdef CONFIG_PM
-	sysfs_unmerge_group(&dev->primary->kdev.kobj, &rc6_attr_group);
+	sysfs_unmerge_group(&dev->primary->kdev->kobj, &rc6_attr_group);
 #endif
 }
include/drm/drmP.h +1 -1
index 9ba6a38..33eaba6 100644
@@ -1043,7 +1043,7 @@ struct drm_minor {
 	int index;			/**< Minor device number */
 	int type;                       /**< Control or render */
 	dev_t device;			/**< Device number for mknod */
-	struct device kdev;		/**< Linux device */
+	struct device *kdev;		/**< Linux device */
 	struct drm_device *dev;
 
 	struct dentry *debugfs_root;
include/drm/drm_crtc.h +1 -1
index 92e7820..c7ce4e2 100644
@@ -587,7 +587,7 @@ enum drm_connector_force {
  */
 struct drm_connector {
 	struct drm_device *dev;
-	struct device kdev;
+	struct device *kdev;
 	struct device_attribute *attr;
 	struct list_head head;
 
Signature · 1 line
1.8.3.1
maintainer
#60 lore raw
In reply to Dave Airlie
Quoted 13 lines

Damn gmail screwed up my reply-all,

anyhoo I get the feeling I'd rather do this like fbdev does and stop using an embedded kdev for this if I can. The lifetime of the minor and the sysfs objects aren't necessarily that tied together esp with hot unplug of USB devices.

e.g. when a USB device goes away I don't want the sysfs files to remain hanging around,
or the userspace device nodes, however I can't remove all the internal driver state until userspace finally closes all open device files,

Quoted 7 lines

I think this is a bit of a bad misdesign of the whole device api that sysfs exposure and device exposure is tied
to objects you are encourgaged to embed.

I think maybe I'll just copy fbdev and do a separate device_create with a nonembedded dev.

Okay it compiles but not boot tested yet.,attached as well just in case gmail eats it.

Quoted 1 line

From be06235b2d2a26c0e52c099e70922b71f1245b9e Mon Sep 17 00:00:00 2001

From: Dave Airlie <[email protected]>
Date: Fri, 11 Oct 2013 14:07:25 +1000
Subject: [PATCH] drm/sysfs: sort out minor and connector device object
lifetimes.

So drm was abusing device lifetimes, by having embedded device structures in the minor and connector it meant that the lifetime of the internal drm objects (drm_minor and drm_connector) were tied to the lifetime of the device files in sysfs, so if something kept those files opened the current code would kfree the objects and things would go downhill from there.

Now in reality there is no need for these lifetimes to be so intertwined, especailly with hotplugging of devices where we wish to remove the sysfs and userspace facing pieces before we can unwind the internal objects due to open userspace files or mmaps, so split the objects out so the struct device is no longer embedded and do what fbdev does and just allocate and remove the sysfs inodes separately.

---
 drivers/gpu/drm/drm_sysfs.c       | 94 ++++++++++++++-------------------------
 drivers/gpu/drm/i915/i915_irq.c   |  8 ++--
 drivers/gpu/drm/i915/i915_sysfs.c | 28 ++++++------
 include/drm/drmP.h                |  2 +-
 include/drm/drm_crtc.h            |  2 +-
 5 files changed, 54 insertions(+), 80 deletions(-)
drivers/gpu/drm/drm_sysfs.c +2 -16
index 2290b3b..dae42c7 100644
@@ -22,8 +22,8 @@
 #include <drm/drm_core.h>
 #include <drm/drmP.h>
 
-#define to_drm_minor(d) container_of(d, struct drm_minor, kdev)
-#define to_drm_connector(d) container_of(d, struct drm_connector, kdev)
+#define to_drm_minor(d) dev_get_drvdata(d)
+#define to_drm_connector(d) dev_get_drvdata(d)
 
 static struct device_type drm_sysfs_device_minor = {
     .name = "drm_minor"
@@ -162,20 +162,6 @@ void drm_sysfs_destroy(void)
     drm_class = NULL;
 }
 
-/**
- * drm_sysfs_device_release - do nothing
- * @dev: Linux device
- *
- * Normally, this would free the DRM device associated with @dev, along
- * with cleaning up any other stuff.  But we do that in the DRM core, so
- * this function can just return and hope that the core does its job.
- */
-static void drm_sysfs_device_release(struct device *dev)
-{
-    memset(dev, 0, sizeof(struct device));
-    return;
-}
-
 /*
  * Connector properties
  */
@@ -394,29 +380,26 @@ int drm_sysfs_connector_add(struct drm_connector

*connector)

     int i;
     int ret;

- /* We shouldn't get called more than once for the same connector */
- BUG_ON(device_is_registered(&connector->kdev));
-

-    connector->kdev.parent = &dev->primary->kdev;
-    connector->kdev.class = drm_class;
-    connector->kdev.release = drm_sysfs_device_release;
+    if (connector->kdev)

+ return 0;

+ /* We shouldn't get called more than once for the same connector */
+ connector->kdev = device_create(drm_class, dev->primary->kdev,
+ 0, connector, "card%d-%s",

+                    dev->primary->index, drm_get_connector_name(connector));
     DRM_DEBUG("adding \"%s\" to sysfs\n",
           drm_get_connector_name(connector));

- dev_set_name(&connector->kdev, "card%d-%s",
- dev->primary->index, drm_get_connector_name(connector));
- ret = device_register(&connector->kdev);
-
- if (ret) {
- DRM_ERROR("failed to register connector device: %d\n", ret);
+ if (IS_ERR(connector->kdev)) {
+ DRM_ERROR("failed to register connector device: %ld\n",
PTR_ERR(connector->kdev));

+        ret = PTR_ERR(connector->kdev);
         goto out;
     }

     /* Standard attributes */

     for (attr_cnt = 0; attr_cnt < ARRAY_SIZE(connector_attrs); attr_cnt++) {
-        ret = device_create_file(&connector->kdev, &connector_attrs[attr_cnt]);
+        ret = device_create_file(connector->kdev, &connector_attrs[attr_cnt]);
         if (ret)
             goto err_out_files;
     }
@@ -433,7 +416,7 @@ int drm_sysfs_connector_add(struct drm_connector *connector)
         case DRM_MODE_CONNECTOR_Component:
         case DRM_MODE_CONNECTOR_TV:
             for (opt_cnt = 0; opt_cnt <

ARRAY_SIZE(connector_attrs_opt1); opt_cnt++) {
- ret = device_create_file(&connector->kdev,
&connector_attrs_opt1[opt_cnt]);
+ ret = device_create_file(connector->kdev,

&connector_attrs_opt1[opt_cnt]);
                 if (ret)
                     goto err_out_files;
             }
@@ -442,7 +425,7 @@ int drm_sysfs_connector_add(struct drm_connector *connector)
             break;
     }

- ret = sysfs_create_bin_file(&connector->kdev.kobj, &edid_attr);

+    ret = sysfs_create_bin_file(&connector->kdev->kobj, &edid_attr);
     if (ret)
         goto err_out_files;

@@ -453,10 +436,11 @@ int drm_sysfs_connector_add(struct drm_connector *connector)

err_out_files:

     for (i = 0; i < opt_cnt; i++)
-        device_remove_file(&connector->kdev, &connector_attrs_opt1[i]);
+        device_remove_file(connector->kdev, &connector_attrs_opt1[i]);
     for (i = 0; i < attr_cnt; i++)

- device_remove_file(&connector->kdev, &connector_attrs[i]);
- device_unregister(&connector->kdev);
+ device_remove_file(connector->kdev, &connector_attrs[i]);
+ put_device(connector->kdev);
+ device_unregister(connector->kdev);

out:

     return ret;
@@ -480,16 +464,17 @@ void drm_sysfs_connector_remove(struct
drm_connector *connector)
 {
     int i;

- if (!connector->kdev.parent)
+ if (!connector->kdev)

         return;
     DRM_DEBUG("removing \"%s\" from sysfs\n",
           drm_get_connector_name(connector));

     for (i = 0; i < ARRAY_SIZE(connector_attrs); i++)
-        device_remove_file(&connector->kdev, &connector_attrs[i]);
-    sysfs_remove_bin_file(&connector->kdev.kobj, &edid_attr);
-    device_unregister(&connector->kdev);
-    connector->kdev.parent = NULL;
+        device_remove_file(connector->kdev, &connector_attrs[i]);
+    sysfs_remove_bin_file(&connector->kdev->kobj, &edid_attr);
+    put_device(connector->kdev);
+    device_unregister(connector->kdev);
+    connector->kdev = NULL;

}
EXPORT_SYMBOL(drm_sysfs_connector_remove);

@@ -508,7 +493,7 @@ void drm_sysfs_hotplug_event(struct drm_device *dev)

     DRM_DEBUG("generating hotplug event\n");

- kobject_uevent_env(&dev->primary->kdev.kobj, KOBJ_CHANGE, envp);
+ kobject_uevent_env(&dev->primary->kdev->kobj, KOBJ_CHANGE, envp);
}
EXPORT_SYMBOL(drm_sysfs_hotplug_event);

@@ -523,15 +508,8 @@ EXPORT_SYMBOL(drm_sysfs_hotplug_event);
*/
int drm_sysfs_device_add(struct drm_minor *minor) {

-    int err;
     char *minor_str;

- minor->kdev.parent = minor->dev->dev;
-

-    minor->kdev.class = drm_class;
-    minor->kdev.release = drm_sysfs_device_release;
-    minor->kdev.devt = minor->device;
-    minor->kdev.type = &drm_sysfs_device_minor;
     if (minor->type == DRM_MINOR_CONTROL)
         minor_str = "controlD%d";
         else if (minor->type == DRM_MINOR_RENDER)
@@ -539,18 +517,14 @@ int drm_sysfs_device_add(struct drm_minor *minor)
         else
                 minor_str = "card%d";

- dev_set_name(&minor->kdev, minor_str, minor->index);
-
- err = device_register(&minor->kdev);
- if (err) {
- DRM_ERROR("device add failed: %d\n", err);
- goto err_out;
+ minor->kdev = device_create(drm_class, minor->dev->dev,
+ MKDEV(DRM_MAJOR, minor->index),
+ minor, minor_str, minor->index);
+ if (IS_ERR(minor->kdev)) {
+ DRM_ERROR("device create failed %ld\n", PTR_ERR(minor->kdev));

+        return PTR_ERR(minor->kdev);
     }
-
     return 0;

-
-err_out:
- return err;
}

/**
@@ -562,9 +536,9 @@ err_out:
*/
void drm_sysfs_device_remove(struct drm_minor *minor) {
- if (minor->kdev.parent)
- device_unregister(&minor->kdev);
- minor->kdev.parent = NULL;
+ if (minor->kdev)
+ device_destroy(drm_class, MKDEV(DRM_MAJOR, minor->index));
+ minor->kdev = NULL;
}

drivers/gpu/drm/i915/i915_irq.c +1 -1
index b356dc1..8d133bf 100644
@@ -933,7 +933,7 @@ static void ivybridge_parity_work(struct work_struct *work)
         parity_event[4] = kasprintf(GFP_KERNEL, "SLICE=%d", slice);
         parity_event[5] = NULL;
 
-        kobject_uevent_env(&dev_priv->dev->primary->kdev.kobj,
+        kobject_uevent_env(&dev_priv->dev->primary->kdev->kobj,
                    KOBJ_CHANGE, parity_event);
 
         DRM_DEBUG("Parity error: Slice = %d, Row = %d, Bank = %d, Sub

bank = %d.\n",
@@ -1530,7 +1530,7 @@ static void i915_error_work_func(struct work_struct *work)

     char *reset_done_event[] = { I915_ERROR_UEVENT "=0", NULL };
     int ret;

- kobject_uevent_env(&dev->primary->kdev.kobj, KOBJ_CHANGE, error_event);
+ kobject_uevent_env(&dev->primary->kdev->kobj, KOBJ_CHANGE, error_event);

/*
* Note that there's only one work item which does gpu resets, so we
@@ -1544,7 +1544,7 @@ static void i915_error_work_func(struct work_struct *work)

      */
     if (i915_reset_in_progress(error) && !i915_terminally_wedged(error)) {
         DRM_DEBUG_DRIVER("resetting chip\n");
-        kobject_uevent_env(&dev->primary->kdev.kobj, KOBJ_CHANGE,
+        kobject_uevent_env(&dev->primary->kdev->kobj, KOBJ_CHANGE,
                    reset_event);

         /*
@@ -1571,7 +1571,7 @@ static void i915_error_work_func(struct work_struct *work)
             smp_mb__before_atomic_inc();
             atomic_inc(&dev_priv->gpu_error.reset_counter);

- kobject_uevent_env(&dev->primary->kdev.kobj,
+ kobject_uevent_env(&dev->primary->kdev->kobj,

                        KOBJ_CHANGE, reset_done_event);
         } else {
             atomic_set(&error->reset_counter, I915_WEDGED);
(quoted diff) +0 -0

b/drivers/gpu/drm/i915/i915_sysfs.c
index 44f4c1a..868aed8 100644

drivers/gpu/drm/i915/i915_sysfs.c +0 -0
@@ -48,14 +48,14 @@ static u32 calc_residency(struct drm_device *dev,

const u32 reg)
static ssize_t
show_rc6_mask(struct device *kdev, struct device_attribute *attr, char *buf) {
- struct drm_minor *dminor = container_of(kdev, struct drm_minor, kdev);

+    struct drm_minor *dminor = dev_get_drvdata(kdev);
     return snprintf(buf, PAGE_SIZE, "%x\n", intel_enable_rc6(dminor->dev));

}

static ssize_t
show_rc6_ms(struct device *kdev, struct device_attribute *attr, char *buf) {
- struct drm_minor *dminor = container_of(kdev, struct drm_minor, kdev);

+    struct drm_minor *dminor = dev_get_drvdata(kdev);
     u32 rc6_residency = calc_residency(dminor->dev, GEN6_GT_GFX_RC6);
     return snprintf(buf, PAGE_SIZE, "%u\n", rc6_residency);

}
@@ -63,7 +63,7 @@ show_rc6_ms(struct device *kdev, struct device_attribute *attr, char *buf)
static ssize_t
show_rc6p_ms(struct device *kdev, struct device_attribute *attr, char *buf) {
- struct drm_minor *dminor = container_of(kdev, struct drm_minor, kdev);

+    struct drm_minor *dminor = dev_get_drvdata(kdev);
     u32 rc6p_residency = calc_residency(dminor->dev, GEN6_GT_GFX_RC6p);
     if (IS_VALLEYVIEW(dminor->dev))
         rc6p_residency = 0;

@@ -73,7 +73,7 @@ show_rc6p_ms(struct device *kdev, struct device_attribute *attr, char *buf)
static ssize_t
show_rc6pp_ms(struct device *kdev, struct device_attribute *attr, char *buf) {
- struct drm_minor *dminor = container_of(kdev, struct drm_minor, kdev);

+    struct drm_minor *dminor = dev_get_drvdata(kdev);
     u32 rc6pp_residency = calc_residency(dminor->dev, GEN6_GT_GFX_RC6pp);
     if (IS_VALLEYVIEW(dminor->dev))
         rc6pp_residency = 0;
@@ -119,7 +119,7 @@ i915_l3_read(struct file *filp, struct kobject *kobj,
          loff_t offset, size_t count)
 {
     struct device *dev = container_of(kobj, struct device, kobj);
-    struct drm_minor *dminor = container_of(dev, struct drm_minor, kdev);
+    struct drm_minor *dminor = dev_get_drvdata(dev);
     struct drm_device *drm_dev = dminor->dev;
     struct drm_i915_private *dev_priv = drm_dev->dev_private;
     int slice = (int)(uintptr_t)attr->private;
@@ -155,7 +155,7 @@ i915_l3_write(struct file *filp, struct kobject *kobj,
           loff_t offset, size_t count)
 {
     struct device *dev = container_of(kobj, struct device, kobj);
-    struct drm_minor *dminor = container_of(dev, struct drm_minor, kdev);
+    struct drm_minor *dminor = dev_get_drvdata(dev);
     struct drm_device *drm_dev = dminor->dev;
     struct drm_i915_private *dev_priv = drm_dev->dev_private;
     struct i915_hw_context *ctx;

@@ -523,7 +523,7 @@ void i915_setup_sysfs(struct drm_device *dev)

 #ifdef CONFIG_PM
     if (INTEL_INFO(dev)->gen >= 6) {
-        ret = sysfs_merge_group(&dev->primary->kdev.kobj,
+        ret = sysfs_merge_group(&dev->primary->kdev->kobj,
                     &rc6_attr_group);
         if (ret)
             DRM_ERROR("RC6 residency sysfs setup failed\n");

@@ -544,13 +544,13 @@ void i915_setup_sysfs(struct drm_device *dev)

     ret = 0;
     if (IS_VALLEYVIEW(dev))
-        ret = sysfs_create_files(&dev->primary->kdev.kobj, vlv_attrs);
+        ret = sysfs_create_files(&dev->primary->kdev->kobj, vlv_attrs);
     else if (INTEL_INFO(dev)->gen >= 6)
-        ret = sysfs_create_files(&dev->primary->kdev.kobj, gen6_attrs);
+        ret = sysfs_create_files(&dev->primary->kdev->kobj, gen6_attrs);
     if (ret)
         DRM_ERROR("RPS sysfs setup failed\n");

- ret = sysfs_create_bin_file(&dev->primary->kdev.kobj,
+ ret = sysfs_create_bin_file(&dev->primary->kdev->kobj,

                     &error_state_attr);
     if (ret)
         DRM_ERROR("error_state sysfs setup failed\n");

@@ -558,14 +558,14 @@ void i915_setup_sysfs(struct drm_device *dev)

void i915_teardown_sysfs(struct drm_device *dev)
{
- sysfs_remove_bin_file(&dev->primary->kdev.kobj, &error_state_attr);
+ sysfs_remove_bin_file(&dev->primary->kdev->kobj, &error_state_attr);
if (IS_VALLEYVIEW(dev))
- sysfs_remove_files(&dev->primary->kdev.kobj, vlv_attrs);
+ sysfs_remove_files(&dev->primary->kdev->kobj, vlv_attrs);
else
- sysfs_remove_files(&dev->primary->kdev.kobj, gen6_attrs);

+        sysfs_remove_files(&dev->primary->kdev->kobj, gen6_attrs);
     device_remove_bin_file(&dev->primary->kdev,  &dpf_attrs_1);
     device_remove_bin_file(&dev->primary->kdev,  &dpf_attrs);

#ifdef CONFIG_PM
- sysfs_unmerge_group(&dev->primary->kdev.kobj, &rc6_attr_group);
+ sysfs_unmerge_group(&dev->primary->kdev->kobj, &rc6_attr_group);
#endif
}

include/drm/drmP.h +1 -1
index 9ba6a38..33eaba6 100644
@@ -1043,7 +1043,7 @@ struct drm_minor {
     int index;            /**< Minor device number */
     int type;                       /**< Control or render */
     dev_t device;            /**< Device number for mknod */
-    struct device kdev;        /**< Linux device */
+    struct device *kdev;        /**< Linux device */
     struct drm_device *dev;
 
     struct dentry *debugfs_root;
include/drm/drm_crtc.h +1 -1
index 92e7820..c7ce4e2 100644
@@ -587,7 +587,7 @@ enum drm_connector_force {
  */
 struct drm_connector {
     struct drm_device *dev;
-    struct device kdev;
+    struct device *kdev;
     struct device_attribute *attr;
     struct list_head head;
 
Signature · 1 line
1.8.3.1

From be06235b2d2a26c0e52c099e70922b71f1245b9e Mon Sep 17 00:00:00 2001
From: Dave Airlie <[email protected]>
Date: Fri, 11 Oct 2013 14:07:25 +1000
Subject: [PATCH] drm/sysfs: sort out minor and connector device object
lifetimes.

So drm was abusing device lifetimes, by having embedded device structures in the minor and connector it meant that the lifetime of the internal drm objects (drm_minor and drm_connector) were tied to the lifetime of the device files in sysfs, so if something kept those files opened the current code would kfree the objects and things would go downhill from there.

Now in reality there is no need for these lifetimes to be so intertwined, especailly with hotplugging of devices where we wish to remove the sysfs and userspace facing pieces before we can unwind the internal objects due to open userspace files or mmaps, so split the objects out so the struct device is no longer embedded and do what fbdev does and just allocate and remove the sysfs inodes separately.

---
 drivers/gpu/drm/drm_sysfs.c       | 94 ++++++++++++++-------------------------
 drivers/gpu/drm/i915/i915_irq.c   |  8 ++--
 drivers/gpu/drm/i915/i915_sysfs.c | 28 ++++++------
 include/drm/drmP.h                |  2 +-
 include/drm/drm_crtc.h            |  2 +-
 5 files changed, 54 insertions(+), 80 deletions(-)
drivers/gpu/drm/drm_sysfs.c +34 -60

180 lines not on this page · raw message

drivers/gpu/drm/i915/i915_irq.c +4 -4
index b356dc1..8d133bf 100644
@@ -933,7 +933,7 @@ static void ivybridge_parity_work(struct work_struct *work)
 		parity_event[4] = kasprintf(GFP_KERNEL, "SLICE=%d", slice);
 		parity_event[5] = NULL;
 
-		kobject_uevent_env(&dev_priv->dev->primary->kdev.kobj,
+		kobject_uevent_env(&dev_priv->dev->primary->kdev->kobj,
 				   KOBJ_CHANGE, parity_event);
 
 		DRM_DEBUG("Parity error: Slice = %d, Row = %d, Bank = %d, Sub bank = %d.\n",
@@ -1530,7 +1530,7 @@ static void i915_error_work_func(struct work_struct *work)
 	char *reset_done_event[] = { I915_ERROR_UEVENT "=0", NULL };
 	int ret;
 
-	kobject_uevent_env(&dev->primary->kdev.kobj, KOBJ_CHANGE, error_event);
+	kobject_uevent_env(&dev->primary->kdev->kobj, KOBJ_CHANGE, error_event);
 
 	/*
 	 * Note that there's only one work item which does gpu resets, so we
@@ -1544,7 +1544,7 @@ static void i915_error_work_func(struct work_struct *work)
 	 */
 	if (i915_reset_in_progress(error) && !i915_terminally_wedged(error)) {
 		DRM_DEBUG_DRIVER("resetting chip\n");
-		kobject_uevent_env(&dev->primary->kdev.kobj, KOBJ_CHANGE,
+		kobject_uevent_env(&dev->primary->kdev->kobj, KOBJ_CHANGE,
 				   reset_event);
 
 		/*
@@ -1571,7 +1571,7 @@ static void i915_error_work_func(struct work_struct *work)
 			smp_mb__before_atomic_inc();
 			atomic_inc(&dev_priv->gpu_error.reset_counter);
 
-			kobject_uevent_env(&dev->primary->kdev.kobj,
+			kobject_uevent_env(&dev->primary->kdev->kobj,
 					   KOBJ_CHANGE, reset_done_event);
 		} else {
 			atomic_set(&error->reset_counter, I915_WEDGED);
drivers/gpu/drm/i915/i915_sysfs.c +14 -14
index 44f4c1a..868aed8 100644
@@ -48,14 +48,14 @@ static u32 calc_residency(struct drm_device *dev, const u32 reg)
 static ssize_t
 show_rc6_mask(struct device *kdev, struct device_attribute *attr, char *buf)
 {
-	struct drm_minor *dminor = container_of(kdev, struct drm_minor, kdev);
+	struct drm_minor *dminor = dev_get_drvdata(kdev);
 	return snprintf(buf, PAGE_SIZE, "%x\n", intel_enable_rc6(dminor->dev));
 }
 
 static ssize_t
 show_rc6_ms(struct device *kdev, struct device_attribute *attr, char *buf)
 {
-	struct drm_minor *dminor = container_of(kdev, struct drm_minor, kdev);
+	struct drm_minor *dminor = dev_get_drvdata(kdev);
 	u32 rc6_residency = calc_residency(dminor->dev, GEN6_GT_GFX_RC6);
 	return snprintf(buf, PAGE_SIZE, "%u\n", rc6_residency);
 }
@@ -63,7 +63,7 @@ show_rc6_ms(struct device *kdev, struct device_attribute *attr, char *buf)
 static ssize_t
 show_rc6p_ms(struct device *kdev, struct device_attribute *attr, char *buf)
 {
-	struct drm_minor *dminor = container_of(kdev, struct drm_minor, kdev);
+	struct drm_minor *dminor = dev_get_drvdata(kdev);
 	u32 rc6p_residency = calc_residency(dminor->dev, GEN6_GT_GFX_RC6p);
 	if (IS_VALLEYVIEW(dminor->dev))
 		rc6p_residency = 0;
@@ -73,7 +73,7 @@ show_rc6p_ms(struct device *kdev, struct device_attribute *attr, char *buf)
 static ssize_t
 show_rc6pp_ms(struct device *kdev, struct device_attribute *attr, char *buf)
 {
-	struct drm_minor *dminor = container_of(kdev, struct drm_minor, kdev);
+	struct drm_minor *dminor = dev_get_drvdata(kdev);
 	u32 rc6pp_residency = calc_residency(dminor->dev, GEN6_GT_GFX_RC6pp);
 	if (IS_VALLEYVIEW(dminor->dev))
 		rc6pp_residency = 0;
@@ -119,7 +119,7 @@ i915_l3_read(struct file *filp, struct kobject *kobj,
 	     loff_t offset, size_t count)
 {
 	struct device *dev = container_of(kobj, struct device, kobj);
-	struct drm_minor *dminor = container_of(dev, struct drm_minor, kdev);
+	struct drm_minor *dminor = dev_get_drvdata(dev);
 	struct drm_device *drm_dev = dminor->dev;
 	struct drm_i915_private *dev_priv = drm_dev->dev_private;
 	int slice = (int)(uintptr_t)attr->private;
@@ -155,7 +155,7 @@ i915_l3_write(struct file *filp, struct kobject *kobj,
 	      loff_t offset, size_t count)
 {
 	struct device *dev = container_of(kobj, struct device, kobj);
-	struct drm_minor *dminor = container_of(dev, struct drm_minor, kdev);
+	struct drm_minor *dminor = dev_get_drvdata(dev);
 	struct drm_device *drm_dev = dminor->dev;
 	struct drm_i915_private *dev_priv = drm_dev->dev_private;
 	struct i915_hw_context *ctx;
@@ -523,7 +523,7 @@ void i915_setup_sysfs(struct drm_device *dev)
 
 #ifdef CONFIG_PM
 	if (INTEL_INFO(dev)->gen >= 6) {
-		ret = sysfs_merge_group(&dev->primary->kdev.kobj,
+		ret = sysfs_merge_group(&dev->primary->kdev->kobj,
 					&rc6_attr_group);
 		if (ret)
 			DRM_ERROR("RC6 residency sysfs setup failed\n");
@@ -544,13 +544,13 @@ void i915_setup_sysfs(struct drm_device *dev)
 
 	ret = 0;
 	if (IS_VALLEYVIEW(dev))
-		ret = sysfs_create_files(&dev->primary->kdev.kobj, vlv_attrs);
+		ret = sysfs_create_files(&dev->primary->kdev->kobj, vlv_attrs);
 	else if (INTEL_INFO(dev)->gen >= 6)
-		ret = sysfs_create_files(&dev->primary->kdev.kobj, gen6_attrs);
+		ret = sysfs_create_files(&dev->primary->kdev->kobj, gen6_attrs);
 	if (ret)
 		DRM_ERROR("RPS sysfs setup failed\n");
 
-	ret = sysfs_create_bin_file(&dev->primary->kdev.kobj,
+	ret = sysfs_create_bin_file(&dev->primary->kdev->kobj,
 				    &error_state_attr);
 	if (ret)
 		DRM_ERROR("error_state sysfs setup failed\n");
@@ -558,14 +558,14 @@ void i915_setup_sysfs(struct drm_device *dev)
 
 void i915_teardown_sysfs(struct drm_device *dev)
 {
-	sysfs_remove_bin_file(&dev->primary->kdev.kobj, &error_state_attr);
+	sysfs_remove_bin_file(&dev->primary->kdev->kobj, &error_state_attr);
 	if (IS_VALLEYVIEW(dev))
-		sysfs_remove_files(&dev->primary->kdev.kobj, vlv_attrs);
+		sysfs_remove_files(&dev->primary->kdev->kobj, vlv_attrs);
 	else
-		sysfs_remove_files(&dev->primary->kdev.kobj, gen6_attrs);
+		sysfs_remove_files(&dev->primary->kdev->kobj, gen6_attrs);
 	device_remove_bin_file(&dev->primary->kdev,  &dpf_attrs_1);
 	device_remove_bin_file(&dev->primary->kdev,  &dpf_attrs);
 #ifdef CONFIG_PM
-	sysfs_unmerge_group(&dev->primary->kdev.kobj, &rc6_attr_group);
+	sysfs_unmerge_group(&dev->primary->kdev->kobj, &rc6_attr_group);
 #endif
 }
include/drm/drmP.h +1 -1
index 9ba6a38..33eaba6 100644
@@ -1043,7 +1043,7 @@ struct drm_minor {
 	int index;			/**< Minor device number */
 	int type;                       /**< Control or render */
 	dev_t device;			/**< Device number for mknod */
-	struct device kdev;		/**< Linux device */
+	struct device *kdev;		/**< Linux device */
 	struct drm_device *dev;
 
 	struct dentry *debugfs_root;
include/drm/drm_crtc.h +1 -1
index 92e7820..c7ce4e2 100644
@@ -587,7 +587,7 @@ enum drm_connector_force {
  */
 struct drm_connector {
 	struct drm_device *dev;
-	struct device kdev;
+	struct device *kdev;
 	struct device_attribute *attr;
 	struct list_head head;
 
Signature · 1 line
1.8.3.1

_______________________________________________
Xen-devel mailing list
[email protected]
http://lists.xen.org/xen-devel

maintainer
#61 lore raw
In reply to Russell King - ARM Linux
Quoted 46 lines · Russell King - ARM Linux
Quoted 30 lines · Russell King - ARM Linux
Quoted 17 lines · Dave Airlie
Quoted 17 lines

I think David Arlie also needs a quiet talking to about how to use the device model:

int drm_sysfs_device_add(struct drm_minor *minor)

{
        minor->kdev.release = drm_sysfs_device_release;
...
        err = device_register(&minor->kdev);
}

static void drm_sysfs_device_release(struct device *dev)

{
        memset(dev, 0, sizeof(struct device));
        return;
}
Quoted 5 lines
Quoted 1 line

Since when has that been acceptable in a release function?

Well the commit that added it had a reason that seems to cover some other device model abuses, so maybe someone who actually understands the device model (all 2 people) can review usage.

Please - there's more than two people who understand this stuff.

You appear to manage to understand the refcounting principle for things like the DRM framebuffers, DRM buffer objects etc, and the driver model (and kobjects in general) are no different.

Quoted 7 lines

I've just been reading the code around here little more, and hit the usb implementation. I don't see how USB drivers get cleaned up when they're disconnected from the USB bus. I see drm_unplug_dev() which gets called on a USB disconnection (from udl/udl_drv.c) which effectively makes the device unavailable, but I don't see anything which frees anything. I see nothing calling drm_put_dev() here. How does the drm_device in this case get freed?

Don't worry about the above - I've worked out how USB works in that regard. However, I can't say that I like the feel of the code in drm_unplug_dev() and drm_put_dev() - if these two can run simultaneously in two threads of execution, there's the chance that things will go awry. I don't think that can happen due to the way the unplugged-ness is dealt with, but it doesn't "feel" safe.

Quoted 7 lines

I think something like the below may address the issue - I've only build tested this so far.

We have another case where DRM does the wrong thing here too - a similar thing goes on with connectors as well. I've not yet looked into this, but I'll take a look later today.

Damn gmail screwed up my reply-all,

anyhoo I get the feeling I'd rather do this like fbdev does and stop using an embedded kdev for this if I can. The lifetime of the minor and the sysfs objects aren't necessarily that tied together esp with hot unplug of USB devices.

e.g. when a USB device goes away I don't want the sysfs files to remain hanging around,
or the userspace device nodes, however I can't remove all the internal driver state until userspace finally closes all open device files,

I think this is a bit of a bad misdesign of the whole device api that sysfs exposure and device exposure is tied
to objects you are encourgaged to embed.

I think maybe I'll just copy fbdev and do a separate device_create with a nonembedded dev.

Dave.

author Tested-by
#62 lore raw
In reply to Russell King - ARM Linux
Quoted 9 lines

I think something like the below may address the issue - I've only build tested this so far.

We have another case where DRM does the wrong thing here too - a similar thing goes on with connectors as well. I've not yet looked into this, but I'll take a look later today.

Fengguang - could you give this some runs through your marvellous test system and see whether it fixes the problem you're seeing please?

Russell, I applied the patch (as commit 17e57131d4c2) on top of v3.12-rc4 and here are the test results for the kernels with

CONFIG_DRM=y
CONFIG_DEBUG_KOBJECT_RELEASE=y

As you may see, it's pure improvements. :)

i386-randconfig-c3-1009

+---------------------------------------------------------------+-----------+--------------+
|                                                               | v3.12-rc4 | 17e57131d4c2 |
+---------------------------------------------------------------+-----------+--------------+
| has_kernel_error_warning                                      | 63        |              |
| BUG:kernel_early_hang_without_any_printk_output               | 7         |              |
| WARNING:CPU:PID:at_fs/sysfs/dir.c:sysfs_add_one()             | 56        |              |
| WARNING:CPU:PID:at_lib/kobject.c:kobject_add_internal()       | 56        |              |
| WARNING:CPU:PID:at_drivers/base/driver.c:driver_unregister()  | 56        |              |
| WARNING:CPU:PID:at_lib/debugobjects.c:debug_print_object()    | 56        |              |
| INFO:trying_to_register_non-static_key                        | 56        |              |
| BUG:unable_to_handle_kernel_NULL_pointer_dereference_at(null) | 56        |              |
| Oops:PREEMPT_SMP                                              | 56        |              |
| Kernel_panic-not_syncing:Fatal_exception_in_interrupt         | 56        |              |
| BUG:kernel_boot_oops                                          | 56        |              |
| good_boots                                                    | 0         | 9            |
+---------------------------------------------------------------+-----------+--------------+

x86_64-randconfig-j5-1009

+------------+-----------+--------------+
|            | v3.12-rc4 | 17e57131d4c2 |
+------------+-----------+--------------+
| good_boots | 30        | 9            |
+------------+-----------+--------------+

x86_64-randconfig-j3-1009

+---------------------------------------------------------------+-----------+--------------+
|                                                               | v3.12-rc4 | 17e57131d4c2 |
+---------------------------------------------------------------+-----------+--------------+
| has_kernel_error_warning                                      | 60        |              |
| WARNING:CPU:PID:at_fs/sysfs/dir.c:sysfs_add_one()             | 60        |              |
| WARNING:CPU:PID:at_lib/kobject.c:kobject_add_internal()       | 60        |              |
| WARNING:CPU:PID:at_drivers/base/driver.c:driver_unregister()  | 60        |              |
| WARNING:CPU:PID:at_lib/debugobjects.c:debug_print_object()    | 60        |              |
| WARNING:CPU:PID:at_arch/x86/kernel/irq_64.c:handle_irq()      | 3         |              |
| BUG:unable_to_handle_kernel_NULL_pointer_dereference_at       | 59        |              |
| Oops:DEBUG_PAGEALLOC                                          | 28        |              |
| WARNING:CPU:PID:at_lib/list_debug.c:__list_del_entry()        | 28        |              |
| BUG:scheduling_while_atomic                                   | 30        |              |
| INFO:lockdep_is_turned_off                                    | 30        |              |
| BUG:unable_to_handle_kernel_paging_request_at                 | 55        |              |
| kernel_BUG_at_kernel/smpboot.c                                | 13        |              |
| invalid_opcode:DEBUG_PAGEALLOC                                | 13        |              |
| general_protection_fault:DEBUG_PAGEALLOC                      | 2         |              |
| Kernel_panic-not_syncing:Fatal_exception_in_interrupt         | 4         |              |
| BUG:kernel_boot_oops                                          | 60        |              |
| WARNING:CPU:PID:at_kernel/workqueue.c:work_fixup_activate()   | 24        |              |
| WARNING:CPU:PID:at_kernel/workqueue.c:__queue_work()          | 10        |              |
| BUG:unable_to_handle_kernel_NULL_pointer_dereference_at(null) | 2         |              |
| BUG:unable_to_handle_kernel                                   | 1         |              |
| BUG:unable_to_handle_kernel_NULL_point                        | 1         |              |
| BUG:unable_to_handle_kernel_NULL_pointer_dereference          | 4         |              |
| BUG:unable_to_handle_kernel_NULL_pointer_derefe               | 1         |              |
| BUG:unable_to_handle_kernel_NULL_pointer_de                   | 1         |              |
| BUG:un                                                        | 1         |              |
| good_boots                                                    | 0         | 9            |
+---------------------------------------------------------------+-----------+--------------+

x86_64-randconfig-j1-1009

+-------------------------------------------------+-----------+--------------+
|                                                 | v3.12-rc4 | 17e57131d4c2 |
+-------------------------------------------------+-----------+--------------+
| has_kernel_error_warning                        | 60        | 9            |
| BUG:kernel_early_hang_without_any_printk_output | 60        | 9            |
+-------------------------------------------------+-----------+--------------+

x86_64-randconfig-j0-1009

+--------------------------+-----------+--------------+
|                          | v3.12-rc4 | 17e57131d4c2 |
+--------------------------+-----------+--------------+
| good_boots               | 56        | 9            |
| has_kernel_error_warning | 4         |              |
| BUG:kernel_test_crashed  | 4         |              |
+--------------------------+-----------+--------------+

x86_64-randconfig-a2-1009

+------------+-----------+--------------+
|            | v3.12-rc4 | 17e57131d4c2 |
+------------+-----------+--------------+
| good_boots | 3         | 9            |
+------------+-----------+--------------+

x86_64-randconfig-c9-1009

+------------+-----------+--------------+
|            | v3.12-rc4 | 17e57131d4c2 |
+------------+-----------+--------------+
| good_boots | 33        | 9            |
+------------+-----------+--------------+

x86_64-randconfig-c3-1009

+-------------------------------------------------+-----------+--------------+
|                                                 | v3.12-rc4 | 17e57131d4c2 |
+-------------------------------------------------+-----------+--------------+
| good_boots                                      | 58        | 8            |
| has_kernel_error_warning                        | 5         | 1            |
| BUG:kernel_early_hang_without_any_printk_output | 5         | 1            |
+-------------------------------------------------+-----------+--------------+

i386-randconfig-r4-1009

+--------------------------------------------------------------+-----------+--------------+
|                                                              | v3.12-rc4 | 17e57131d4c2 |
+--------------------------------------------------------------+-----------+--------------+
| has_kernel_error_warning                                     | 63        |              |
| WARNING:CPU:PID:at_fs/sysfs/dir.c:sysfs_add_one()            | 63        |              |
| WARNING:CPU:PID:at_lib/kobject.c:kobject_add_internal()      | 63        |              |
| WARNING:CPU:PID:at_drivers/base/driver.c:driver_unregister() | 63        |              |
| WARNING:CPU:PID:at_lib/debugobjects.c:debug_print_object()   | 63        |              |
| INFO:trying_to_register_non-static_key                       | 63        |              |
| kernel_BUG_at_kernel/timer.c                                 | 63        |              |
| invalid_opcode:SMP                                           | 63        |              |
| Kernel_panic-not_syncing:Fatal_exception_in_interrupt        | 63        |              |
| BUG:kernel_boot_oops                                         | 63        |              |
| good_boots                                                   | 0         | 9            |
+--------------------------------------------------------------+-----------+--------------+

i386-randconfig-r3-1009

+------------+-----------+--------------+
|            | v3.12-rc4 | 17e57131d4c2 |
+------------+-----------+--------------+
| good_boots | 3         | 9            |
+------------+-----------+--------------+

i386-randconfig-r1-1009

+-------------------------------------------------+-----------+--------------+
|                                                 | v3.12-rc4 | 17e57131d4c2 |
+-------------------------------------------------+-----------+--------------+
| has_kernel_error_warning                        | 63        | 9            |
| BUG:kernel_early_hang_without_any_printk_output | 63        | 9            |
+-------------------------------------------------+-----------+--------------+

i386-randconfig-x2-1009

+------------+-----------+--------------+
|            | v3.12-rc4 | 17e57131d4c2 |
+------------+-----------+--------------+
| good_boots | 3         | 9            |
+------------+-----------+--------------+

i386-randconfig-i008-1008

+-------------------------------------------------+-----------+--------------+
|                                                 | v3.12-rc4 | 17e57131d4c2 |
+-------------------------------------------------+-----------+--------------+
| has_kernel_error_warning                        | 60        | 9            |
| BUG:kernel_early_hang_without_any_printk_output | 60        | 9            |
+-------------------------------------------------+-----------+--------------+

x86_64-randconfig-x1-1009

+---------------------------------------------------------------+-----------+--------------+
|                                                               | v3.12-rc4 | 17e57131d4c2 |
+---------------------------------------------------------------+-----------+--------------+
| has_kernel_error_warning                                      | 63        |              |
| WARNING:CPU:PID:at_fs/sysfs/dir.c:sysfs_add_one()             | 63        |              |
| WARNING:CPU:PID:at_lib/kobject.c:kobject_add_internal()       | 63        |              |
| WARNING:CPU:PID:at_drivers/base/driver.c:driver_unregister()  | 63        |              |
| BUG:unable_to_handle_kernel_NULL_pointer_dereference_at(null) | 63        |              |
| Oops                                                          | 63        |              |
| Kernel_panic-not_syncing:Fatal_exception_in_interrupt         | 63        |              |
| BUG:kernel_boot_oops                                          | 63        |              |
| INFO:trying_to_register_non-static_key                        | 2         |              |
| good_boots                                                    | 0         | 9            |
+---------------------------------------------------------------+-----------+--------------+
#63 lore raw

How is this going?

regards,

2013/10/11 Fengguang Wu <[email protected]>:

Quoted 200 lines
Quoted 9 lines

I think something like the below may address the issue - I've only build tested this so far.

We have another case where DRM does the wrong thing here too - a similar thing goes on with connectors as well. I've not yet looked into this, but I'll take a look later today.

Fengguang - could you give this some runs through your marvellous test system and see whether it fixes the problem you're seeing please?

Russell, I applied the patch (as commit 17e57131d4c2) on top of v3.12-rc4 and here are the test results for the kernels with

CONFIG_DRM=y
CONFIG_DEBUG_KOBJECT_RELEASE=y

As you may see, it's pure improvements. :)

i386-randconfig-c3-1009

+---------------------------------------------------------------+-----------+--------------+
|                                                               | v3.12-rc4 | 17e57131d4c2 |
+---------------------------------------------------------------+-----------+--------------+
| has_kernel_error_warning                                      | 63        |              |
| BUG:kernel_early_hang_without_any_printk_output               | 7         |              |
| WARNING:CPU:PID:at_fs/sysfs/dir.c:sysfs_add_one()             | 56        |              |
| WARNING:CPU:PID:at_lib/kobject.c:kobject_add_internal()       | 56        |              |
| WARNING:CPU:PID:at_drivers/base/driver.c:driver_unregister()  | 56        |              |
| WARNING:CPU:PID:at_lib/debugobjects.c:debug_print_object()    | 56        |              |
| INFO:trying_to_register_non-static_key                        | 56        |              |
| BUG:unable_to_handle_kernel_NULL_pointer_dereference_at(null) | 56        |              |
| Oops:PREEMPT_SMP                                              | 56        |              |
| Kernel_panic-not_syncing:Fatal_exception_in_interrupt         | 56        |              |
| BUG:kernel_boot_oops                                          | 56        |              |
| good_boots                                                    | 0         | 9            |
+---------------------------------------------------------------+-----------+--------------+

x86_64-randconfig-j5-1009

+------------+-----------+--------------+
|            | v3.12-rc4 | 17e57131d4c2 |
+------------+-----------+--------------+
| good_boots | 30        | 9            |
+------------+-----------+--------------+

x86_64-randconfig-j3-1009

+---------------------------------------------------------------+-----------+--------------+
|                                                               | v3.12-rc4 | 17e57131d4c2 |
+---------------------------------------------------------------+-----------+--------------+
| has_kernel_error_warning                                      | 60        |              |
| WARNING:CPU:PID:at_fs/sysfs/dir.c:sysfs_add_one()             | 60        |              |
| WARNING:CPU:PID:at_lib/kobject.c:kobject_add_internal()       | 60        |              |
| WARNING:CPU:PID:at_drivers/base/driver.c:driver_unregister()  | 60        |              |
| WARNING:CPU:PID:at_lib/debugobjects.c:debug_print_object()    | 60        |              |
| WARNING:CPU:PID:at_arch/x86/kernel/irq_64.c:handle_irq()      | 3         |              |
| BUG:unable_to_handle_kernel_NULL_pointer_dereference_at       | 59        |              |
| Oops:DEBUG_PAGEALLOC                                          | 28        |              |
| WARNING:CPU:PID:at_lib/list_debug.c:__list_del_entry()        | 28        |              |
| BUG:scheduling_while_atomic                                   | 30        |              |
| INFO:lockdep_is_turned_off                                    | 30        |              |
| BUG:unable_to_handle_kernel_paging_request_at                 | 55        |              |
| kernel_BUG_at_kernel/smpboot.c                                | 13        |              |
| invalid_opcode:DEBUG_PAGEALLOC                                | 13        |              |
| general_protection_fault:DEBUG_PAGEALLOC                      | 2         |              |
| Kernel_panic-not_syncing:Fatal_exception_in_interrupt         | 4         |              |
| BUG:kernel_boot_oops                                          | 60        |              |
| WARNING:CPU:PID:at_kernel/workqueue.c:work_fixup_activate()   | 24        |              |
| WARNING:CPU:PID:at_kernel/workqueue.c:__queue_work()          | 10        |              |
| BUG:unable_to_handle_kernel_NULL_pointer_dereference_at(null) | 2         |              |
| BUG:unable_to_handle_kernel                                   | 1         |              |
| BUG:unable_to_handle_kernel_NULL_point                        | 1         |              |
| BUG:unable_to_handle_kernel_NULL_pointer_dereference          | 4         |              |
| BUG:unable_to_handle_kernel_NULL_pointer_derefe               | 1         |              |
| BUG:unable_to_handle_kernel_NULL_pointer_de                   | 1         |              |
| BUG:un                                                        | 1         |              |
| good_boots                                                    | 0         | 9            |
+---------------------------------------------------------------+-----------+--------------+

x86_64-randconfig-j1-1009

+-------------------------------------------------+-----------+--------------+
|                                                 | v3.12-rc4 | 17e57131d4c2 |
+-------------------------------------------------+-----------+--------------+
| has_kernel_error_warning                        | 60        | 9            |
| BUG:kernel_early_hang_without_any_printk_output | 60        | 9            |
+-------------------------------------------------+-----------+--------------+

x86_64-randconfig-j0-1009

+--------------------------+-----------+--------------+
|                          | v3.12-rc4 | 17e57131d4c2 |
+--------------------------+-----------+--------------+
| good_boots               | 56        | 9            |
| has_kernel_error_warning | 4         |              |
| BUG:kernel_test_crashed  | 4         |              |
+--------------------------+-----------+--------------+

x86_64-randconfig-a2-1009

+------------+-----------+--------------+
|            | v3.12-rc4 | 17e57131d4c2 |
+------------+-----------+--------------+
| good_boots | 3         | 9            |
+------------+-----------+--------------+

x86_64-randconfig-c9-1009

+------------+-----------+--------------+
|            | v3.12-rc4 | 17e57131d4c2 |
+------------+-----------+--------------+
| good_boots | 33        | 9            |
+------------+-----------+--------------+

x86_64-randconfig-c3-1009

+-------------------------------------------------+-----------+--------------+
|                                                 | v3.12-rc4 | 17e57131d4c2 |
+-------------------------------------------------+-----------+--------------+
| good_boots                                      | 58        | 8            |
| has_kernel_error_warning                        | 5         | 1            |
| BUG:kernel_early_hang_without_any_printk_output | 5         | 1            |
+-------------------------------------------------+-----------+--------------+

i386-randconfig-r4-1009

+--------------------------------------------------------------+-----------+--------------+
|                                                              | v3.12-rc4 | 17e57131d4c2 |
+--------------------------------------------------------------+-----------+--------------+
| has_kernel_error_warning                                     | 63        |              |
| WARNING:CPU:PID:at_fs/sysfs/dir.c:sysfs_add_one()            | 63        |              |
| WARNING:CPU:PID:at_lib/kobject.c:kobject_add_internal()      | 63        |              |
| WARNING:CPU:PID:at_drivers/base/driver.c:driver_unregister() | 63        |              |
| WARNING:CPU:PID:at_lib/debugobjects.c:debug_print_object()   | 63        |              |
| INFO:trying_to_register_non-static_key                       | 63        |              |
| kernel_BUG_at_kernel/timer.c                                 | 63        |              |
| invalid_opcode:SMP                                           | 63        |              |
| Kernel_panic-not_syncing:Fatal_exception_in_interrupt        | 63        |              |
| BUG:kernel_boot_oops                                         | 63        |              |
| good_boots                                                   | 0         | 9            |
+--------------------------------------------------------------+-----------+--------------+

i386-randconfig-r3-1009

+------------+-----------+--------------+
|            | v3.12-rc4 | 17e57131d4c2 |
+------------+-----------+--------------+
| good_boots | 3         | 9            |
+------------+-----------+--------------+

i386-randconfig-r1-1009

+-------------------------------------------------+-----------+--------------+
|                                                 | v3.12-rc4 | 17e57131d4c2 |
+-------------------------------------------------+-----------+--------------+
| has_kernel_error_warning                        | 63        | 9            |
| BUG:kernel_early_hang_without_any_printk_output | 63        | 9            |
+-------------------------------------------------+-----------+--------------+

i386-randconfig-x2-1009

+------------+-----------+--------------+
|            | v3.12-rc4 | 17e57131d4c2 |
+------------+-----------+--------------+
| good_boots | 3         | 9            |
+------------+-----------+--------------+

i386-randconfig-i008-1008

+-------------------------------------------------+-----------+--------------+
|                                                 | v3.12-rc4 | 17e57131d4c2 |
+-------------------------------------------------+-----------+--------------+
| has_kernel_error_warning                        | 60        | 9            |
| BUG:kernel_early_hang_without_any_printk_output | 60        | 9            |
+-------------------------------------------------+-----------+--------------+

x86_64-randconfig-x1-1009

+---------------------------------------------------------------+-----------+--------------+
|                                                               | v3.12-rc4 | 17e57131d4c2 |
+---------------------------------------------------------------+-----------+--------------+
| has_kernel_error_warning                                      | 63        |              |
| WARNING:CPU:PID:at_fs/sysfs/dir.c:sysfs_add_one()             | 63        |              |
| WARNING:CPU:PID:at_lib/kobject.c:kobject_add_internal()       | 63        |              |
| WARNING:CPU:PID:at_drivers/base/driver.c:driver_unregister()  | 63        |              |
| BUG:unable_to_handle_kernel_NULL_pointer_dereference_at(null) | 63        |              |
| Oops                                                          | 63        |              |
| Kernel_panic-not_syncing:Fatal_exception_in_interrupt         | 63        |              |
| BUG:kernel_boot_oops                                          | 63        |              |
| INFO:trying_to_register_non-static_key                        | 2         |              |
| good_boots                                                    | 0         | 9            |
+---------------------------------------------------------------+-----------+--------------+

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

#64 lore raw
In reply to Fengguang Wu

How is this going?

regards,

2013/10/11 Fengguang Wu <[email protected]>:

Quoted 200 lines
Quoted 9 lines

I think something like the below may address the issue - I've only build tested this so far.

We have another case where DRM does the wrong thing here too - a similar thing goes on with connectors as well. I've not yet looked into this, but I'll take a look later today.

Fengguang - could you give this some runs through your marvellous test system and see whether it fixes the problem you're seeing please?

Russell, I applied the patch (as commit 17e57131d4c2) on top of v3.12-rc4 and here are the test results for the kernels with

CONFIG_DRM=y
CONFIG_DEBUG_KOBJECT_RELEASE=y

As you may see, it's pure improvements. :)

i386-randconfig-c3-1009

+---------------------------------------------------------------+-----------+--------------+
|                                                               | v3.12-rc4 | 17e57131d4c2 |
+---------------------------------------------------------------+-----------+--------------+
| has_kernel_error_warning                                      | 63        |              |
| BUG:kernel_early_hang_without_any_printk_output               | 7         |              |
| WARNING:CPU:PID:at_fs/sysfs/dir.c:sysfs_add_one()             | 56        |              |
| WARNING:CPU:PID:at_lib/kobject.c:kobject_add_internal()       | 56        |              |
| WARNING:CPU:PID:at_drivers/base/driver.c:driver_unregister()  | 56        |              |
| WARNING:CPU:PID:at_lib/debugobjects.c:debug_print_object()    | 56        |              |
| INFO:trying_to_register_non-static_key                        | 56        |              |
| BUG:unable_to_handle_kernel_NULL_pointer_dereference_at(null) | 56        |              |
| Oops:PREEMPT_SMP                                              | 56        |              |
| Kernel_panic-not_syncing:Fatal_exception_in_interrupt         | 56        |              |
| BUG:kernel_boot_oops                                          | 56        |              |
| good_boots                                                    | 0         | 9            |
+---------------------------------------------------------------+-----------+--------------+

x86_64-randconfig-j5-1009

+------------+-----------+--------------+
|            | v3.12-rc4 | 17e57131d4c2 |
+------------+-----------+--------------+
| good_boots | 30        | 9            |
+------------+-----------+--------------+

x86_64-randconfig-j3-1009

+---------------------------------------------------------------+-----------+--------------+
|                                                               | v3.12-rc4 | 17e57131d4c2 |
+---------------------------------------------------------------+-----------+--------------+
| has_kernel_error_warning                                      | 60        |              |
| WARNING:CPU:PID:at_fs/sysfs/dir.c:sysfs_add_one()             | 60        |              |
| WARNING:CPU:PID:at_lib/kobject.c:kobject_add_internal()       | 60        |              |
| WARNING:CPU:PID:at_drivers/base/driver.c:driver_unregister()  | 60        |              |
| WARNING:CPU:PID:at_lib/debugobjects.c:debug_print_object()    | 60        |              |
| WARNING:CPU:PID:at_arch/x86/kernel/irq_64.c:handle_irq()      | 3         |              |
| BUG:unable_to_handle_kernel_NULL_pointer_dereference_at       | 59        |              |
| Oops:DEBUG_PAGEALLOC                                          | 28        |              |
| WARNING:CPU:PID:at_lib/list_debug.c:__list_del_entry()        | 28        |              |
| BUG:scheduling_while_atomic                                   | 30        |              |
| INFO:lockdep_is_turned_off                                    | 30        |              |
| BUG:unable_to_handle_kernel_paging_request_at                 | 55        |              |
| kernel_BUG_at_kernel/smpboot.c                                | 13        |              |
| invalid_opcode:DEBUG_PAGEALLOC                                | 13        |              |
| general_protection_fault:DEBUG_PAGEALLOC                      | 2         |              |
| Kernel_panic-not_syncing:Fatal_exception_in_interrupt         | 4         |              |
| BUG:kernel_boot_oops                                          | 60        |              |
| WARNING:CPU:PID:at_kernel/workqueue.c:work_fixup_activate()   | 24        |              |
| WARNING:CPU:PID:at_kernel/workqueue.c:__queue_work()          | 10        |              |
| BUG:unable_to_handle_kernel_NULL_pointer_dereference_at(null) | 2         |              |
| BUG:unable_to_handle_kernel                                   | 1         |              |
| BUG:unable_to_handle_kernel_NULL_point                        | 1         |              |
| BUG:unable_to_handle_kernel_NULL_pointer_dereference          | 4         |              |
| BUG:unable_to_handle_kernel_NULL_pointer_derefe               | 1         |              |
| BUG:unable_to_handle_kernel_NULL_pointer_de                   | 1         |              |
| BUG:un                                                        | 1         |              |
| good_boots                                                    | 0         | 9            |
+---------------------------------------------------------------+-----------+--------------+

x86_64-randconfig-j1-1009

+-------------------------------------------------+-----------+--------------+
|                                                 | v3.12-rc4 | 17e57131d4c2 |
+-------------------------------------------------+-----------+--------------+
| has_kernel_error_warning                        | 60        | 9            |
| BUG:kernel_early_hang_without_any_printk_output | 60        | 9            |
+-------------------------------------------------+-----------+--------------+

x86_64-randconfig-j0-1009

+--------------------------+-----------+--------------+
|                          | v3.12-rc4 | 17e57131d4c2 |
+--------------------------+-----------+--------------+
| good_boots               | 56        | 9            |
| has_kernel_error_warning | 4         |              |
| BUG:kernel_test_crashed  | 4         |              |
+--------------------------+-----------+--------------+

x86_64-randconfig-a2-1009

+------------+-----------+--------------+
|            | v3.12-rc4 | 17e57131d4c2 |
+------------+-----------+--------------+
| good_boots | 3         | 9            |
+------------+-----------+--------------+

x86_64-randconfig-c9-1009

+------------+-----------+--------------+
|            | v3.12-rc4 | 17e57131d4c2 |
+------------+-----------+--------------+
| good_boots | 33        | 9            |
+------------+-----------+--------------+

x86_64-randconfig-c3-1009

+-------------------------------------------------+-----------+--------------+
|                                                 | v3.12-rc4 | 17e57131d4c2 |
+-------------------------------------------------+-----------+--------------+
| good_boots                                      | 58        | 8            |
| has_kernel_error_warning                        | 5         | 1            |
| BUG:kernel_early_hang_without_any_printk_output | 5         | 1            |
+-------------------------------------------------+-----------+--------------+

i386-randconfig-r4-1009

+--------------------------------------------------------------+-----------+--------------+
|                                                              | v3.12-rc4 | 17e57131d4c2 |
+--------------------------------------------------------------+-----------+--------------+
| has_kernel_error_warning                                     | 63        |              |
| WARNING:CPU:PID:at_fs/sysfs/dir.c:sysfs_add_one()            | 63        |              |
| WARNING:CPU:PID:at_lib/kobject.c:kobject_add_internal()      | 63        |              |
| WARNING:CPU:PID:at_drivers/base/driver.c:driver_unregister() | 63        |              |
| WARNING:CPU:PID:at_lib/debugobjects.c:debug_print_object()   | 63        |              |
| INFO:trying_to_register_non-static_key                       | 63        |              |
| kernel_BUG_at_kernel/timer.c                                 | 63        |              |
| invalid_opcode:SMP                                           | 63        |              |
| Kernel_panic-not_syncing:Fatal_exception_in_interrupt        | 63        |              |
| BUG:kernel_boot_oops                                         | 63        |              |
| good_boots                                                   | 0         | 9            |
+--------------------------------------------------------------+-----------+--------------+

i386-randconfig-r3-1009

+------------+-----------+--------------+
|            | v3.12-rc4 | 17e57131d4c2 |
+------------+-----------+--------------+
| good_boots | 3         | 9            |
+------------+-----------+--------------+

i386-randconfig-r1-1009

+-------------------------------------------------+-----------+--------------+
|                                                 | v3.12-rc4 | 17e57131d4c2 |
+-------------------------------------------------+-----------+--------------+
| has_kernel_error_warning                        | 63        | 9            |
| BUG:kernel_early_hang_without_any_printk_output | 63        | 9            |
+-------------------------------------------------+-----------+--------------+

i386-randconfig-x2-1009

+------------+-----------+--------------+
|            | v3.12-rc4 | 17e57131d4c2 |
+------------+-----------+--------------+
| good_boots | 3         | 9            |
+------------+-----------+--------------+

i386-randconfig-i008-1008

+-------------------------------------------------+-----------+--------------+
|                                                 | v3.12-rc4 | 17e57131d4c2 |
+-------------------------------------------------+-----------+--------------+
| has_kernel_error_warning                        | 60        | 9            |
| BUG:kernel_early_hang_without_any_printk_output | 60        | 9            |
+-------------------------------------------------+-----------+--------------+

x86_64-randconfig-x1-1009

+---------------------------------------------------------------+-----------+--------------+
|                                                               | v3.12-rc4 | 17e57131d4c2 |
+---------------------------------------------------------------+-----------+--------------+
| has_kernel_error_warning                                      | 63        |              |
| WARNING:CPU:PID:at_fs/sysfs/dir.c:sysfs_add_one()             | 63        |              |
| WARNING:CPU:PID:at_lib/kobject.c:kobject_add_internal()       | 63        |              |
| WARNING:CPU:PID:at_drivers/base/driver.c:driver_unregister()  | 63        |              |
| BUG:unable_to_handle_kernel_NULL_pointer_dereference_at(null) | 63        |              |
| Oops                                                          | 63        |              |
| Kernel_panic-not_syncing:Fatal_exception_in_interrupt         | 63        |              |
| BUG:kernel_boot_oops                                          | 63        |              |
| INFO:trying_to_register_non-static_key                        | 2         |              |
| good_boots                                                    | 0         | 9            |
+---------------------------------------------------------------+-----------+--------------+

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

author Tested-by
#65 lore raw
In reply to Russell King - ARM Linux
Quoted 9 lines

I think something like the below may address the issue - I've only build tested this so far.

We have another case where DRM does the wrong thing here too - a similar thing goes on with connectors as well. I've not yet looked into this, but I'll take a look later today.

Fengguang - could you give this some runs through your marvellous test system and see whether it fixes the problem you're seeing please?

Russell, I applied the patch (as commit 17e57131d4c2) on top of v3.12-rc4 and here are the test results for the kernels with

CONFIG_DRM=y
CONFIG_DEBUG_KOBJECT_RELEASE=y

As you may see, it's pure improvements. :)

i386-randconfig-c3-1009

+---------------------------------------------------------------+-----------+--------------+
|                                                               | v3.12-rc4 | 17e57131d4c2 |
+---------------------------------------------------------------+-----------+--------------+
| has_kernel_error_warning                                      | 63        |              |
| BUG:kernel_early_hang_without_any_printk_output               | 7         |              |
| WARNING:CPU:PID:at_fs/sysfs/dir.c:sysfs_add_one()             | 56        |              |
| WARNING:CPU:PID:at_lib/kobject.c:kobject_add_internal()       | 56        |              |
| WARNING:CPU:PID:at_drivers/base/driver.c:driver_unregister()  | 56        |              |
| WARNING:CPU:PID:at_lib/debugobjects.c:debug_print_object()    | 56        |              |
| INFO:trying_to_register_non-static_key                        | 56        |              |
| BUG:unable_to_handle_kernel_NULL_pointer_dereference_at(null) | 56        |              |
| Oops:PREEMPT_SMP                                              | 56        |              |
| Kernel_panic-not_syncing:Fatal_exception_in_interrupt         | 56        |              |
| BUG:kernel_boot_oops                                          | 56        |              |
| good_boots                                                    | 0         | 9            |
+---------------------------------------------------------------+-----------+--------------+

x86_64-randconfig-j5-1009

+------------+-----------+--------------+
|            | v3.12-rc4 | 17e57131d4c2 |
+------------+-----------+--------------+
| good_boots | 30        | 9            |
+------------+-----------+--------------+

x86_64-randconfig-j3-1009

+---------------------------------------------------------------+-----------+--------------+
|                                                               | v3.12-rc4 | 17e57131d4c2 |
+---------------------------------------------------------------+-----------+--------------+
| has_kernel_error_warning                                      | 60        |              |
| WARNING:CPU:PID:at_fs/sysfs/dir.c:sysfs_add_one()             | 60        |              |
| WARNING:CPU:PID:at_lib/kobject.c:kobject_add_internal()       | 60        |              |
| WARNING:CPU:PID:at_drivers/base/driver.c:driver_unregister()  | 60        |              |
| WARNING:CPU:PID:at_lib/debugobjects.c:debug_print_object()    | 60        |              |
| WARNING:CPU:PID:at_arch/x86/kernel/irq_64.c:handle_irq()      | 3         |              |
| BUG:unable_to_handle_kernel_NULL_pointer_dereference_at       | 59        |              |
| Oops:DEBUG_PAGEALLOC                                          | 28        |              |
| WARNING:CPU:PID:at_lib/list_debug.c:__list_del_entry()        | 28        |              |
| BUG:scheduling_while_atomic                                   | 30        |              |
| INFO:lockdep_is_turned_off                                    | 30        |              |
| BUG:unable_to_handle_kernel_paging_request_at                 | 55        |              |
| kernel_BUG_at_kernel/smpboot.c                                | 13        |              |
| invalid_opcode:DEBUG_PAGEALLOC                                | 13        |              |
| general_protection_fault:DEBUG_PAGEALLOC                      | 2         |              |
| Kernel_panic-not_syncing:Fatal_exception_in_interrupt         | 4         |              |
| BUG:kernel_boot_oops                                          | 60        |              |
| WARNING:CPU:PID:at_kernel/workqueue.c:work_fixup_activate()   | 24        |              |
| WARNING:CPU:PID:at_kernel/workqueue.c:__queue_work()          | 10        |              |
| BUG:unable_to_handle_kernel_NULL_pointer_dereference_at(null) | 2         |              |
| BUG:unable_to_handle_kernel                                   | 1         |              |
| BUG:unable_to_handle_kernel_NULL_point                        | 1         |              |
| BUG:unable_to_handle_kernel_NULL_pointer_dereference          | 4         |              |
| BUG:unable_to_handle_kernel_NULL_pointer_derefe               | 1         |              |
| BUG:unable_to_handle_kernel_NULL_pointer_de                   | 1         |              |
| BUG:un                                                        | 1         |              |
| good_boots                                                    | 0         | 9            |
+---------------------------------------------------------------+-----------+--------------+

x86_64-randconfig-j1-1009

+-------------------------------------------------+-----------+--------------+
|                                                 | v3.12-rc4 | 17e57131d4c2 |
+-------------------------------------------------+-----------+--------------+
| has_kernel_error_warning                        | 60        | 9            |
| BUG:kernel_early_hang_without_any_printk_output | 60        | 9            |
+-------------------------------------------------+-----------+--------------+

x86_64-randconfig-j0-1009

+--------------------------+-----------+--------------+
|                          | v3.12-rc4 | 17e57131d4c2 |
+--------------------------+-----------+--------------+
| good_boots               | 56        | 9            |
| has_kernel_error_warning | 4         |              |
| BUG:kernel_test_crashed  | 4         |              |
+--------------------------+-----------+--------------+

x86_64-randconfig-a2-1009

+------------+-----------+--------------+
|            | v3.12-rc4 | 17e57131d4c2 |
+------------+-----------+--------------+
| good_boots | 3         | 9            |
+------------+-----------+--------------+

x86_64-randconfig-c9-1009

+------------+-----------+--------------+
|            | v3.12-rc4 | 17e57131d4c2 |
+------------+-----------+--------------+
| good_boots | 33        | 9            |
+------------+-----------+--------------+

x86_64-randconfig-c3-1009

+-------------------------------------------------+-----------+--------------+
|                                                 | v3.12-rc4 | 17e57131d4c2 |
+-------------------------------------------------+-----------+--------------+
| good_boots                                      | 58        | 8            |
| has_kernel_error_warning                        | 5         | 1            |
| BUG:kernel_early_hang_without_any_printk_output | 5         | 1            |
+-------------------------------------------------+-----------+--------------+

i386-randconfig-r4-1009

+--------------------------------------------------------------+-----------+--------------+
|                                                              | v3.12-rc4 | 17e57131d4c2 |
+--------------------------------------------------------------+-----------+--------------+
| has_kernel_error_warning                                     | 63        |              |
| WARNING:CPU:PID:at_fs/sysfs/dir.c:sysfs_add_one()            | 63        |              |
| WARNING:CPU:PID:at_lib/kobject.c:kobject_add_internal()      | 63        |              |
| WARNING:CPU:PID:at_drivers/base/driver.c:driver_unregister() | 63        |              |
| WARNING:CPU:PID:at_lib/debugobjects.c:debug_print_object()   | 63        |              |
| INFO:trying_to_register_non-static_key                       | 63        |              |
| kernel_BUG_at_kernel/timer.c                                 | 63        |              |
| invalid_opcode:SMP                                           | 63        |              |
| Kernel_panic-not_syncing:Fatal_exception_in_interrupt        | 63        |              |
| BUG:kernel_boot_oops                                         | 63        |              |
| good_boots                                                   | 0         | 9            |
+--------------------------------------------------------------+-----------+--------------+

i386-randconfig-r3-1009

+------------+-----------+--------------+
|            | v3.12-rc4 | 17e57131d4c2 |
+------------+-----------+--------------+
| good_boots | 3         | 9            |
+------------+-----------+--------------+

i386-randconfig-r1-1009

+-------------------------------------------------+-----------+--------------+
|                                                 | v3.12-rc4 | 17e57131d4c2 |
+-------------------------------------------------+-----------+--------------+
| has_kernel_error_warning                        | 63        | 9            |
| BUG:kernel_early_hang_without_any_printk_output | 63        | 9            |
+-------------------------------------------------+-----------+--------------+

i386-randconfig-x2-1009

+------------+-----------+--------------+
|            | v3.12-rc4 | 17e57131d4c2 |
+------------+-----------+--------------+
| good_boots | 3         | 9            |
+------------+-----------+--------------+

i386-randconfig-i008-1008

+-------------------------------------------------+-----------+--------------+
|                                                 | v3.12-rc4 | 17e57131d4c2 |
+-------------------------------------------------+-----------+--------------+
| has_kernel_error_warning                        | 60        | 9            |
| BUG:kernel_early_hang_without_any_printk_output | 60        | 9            |
+-------------------------------------------------+-----------+--------------+

x86_64-randconfig-x1-1009

+---------------------------------------------------------------+-----------+--------------+
|                                                               | v3.12-rc4 | 17e57131d4c2 |
+---------------------------------------------------------------+-----------+--------------+
| has_kernel_error_warning                                      | 63        |              |
| WARNING:CPU:PID:at_fs/sysfs/dir.c:sysfs_add_one()             | 63        |              |
| WARNING:CPU:PID:at_lib/kobject.c:kobject_add_internal()       | 63        |              |
| WARNING:CPU:PID:at_drivers/base/driver.c:driver_unregister()  | 63        |              |
| BUG:unable_to_handle_kernel_NULL_pointer_dereference_at(null) | 63        |              |
| Oops                                                          | 63        |              |
| Kernel_panic-not_syncing:Fatal_exception_in_interrupt         | 63        |              |
| BUG:kernel_boot_oops                                          | 63        |              |
| INFO:trying_to_register_non-static_key                        | 2         |              |
| good_boots                                                    | 0         | 9            |
+---------------------------------------------------------------+-----------+--------------+
#66 lore raw
In reply to Fengguang Wu
Quoted 13 lines · Fengguang Wu
Quoted 12 lines · Linus Torvalds
Quoted 4 lines · Linus Torvalds

I *think* r14 contains the function we're going to jump to in the oops, and that could be interesting to know, but it's not decoded, so you'd have to match it up against a symbol map...

Actually, Fenguguan, never mind. Instead, change the "pr_debug()" in kobject_release() to "pr_alert()", so that it gets printed out. Or just boot with the "ignore_loglevel" thing so that debug messages are actually visible.

Quoted 7 lines
Quoted 3 lines

At that point, we should be able to match the oops workqueue list address with the address of the delayed kernel object that gets printed out.

Thanks for the hints! I run a kernel with pr_alert() for several times and here is the screen log. Note that this kernel is compiled with gcc 4.6.3 and the decoded code looks different than gcc 4.8.1

I got a call trace containing parport_pc_probe_port() (is it the culprit?) after recompiling kernel with

CONFIG_DEBUG_OBJECTS_TIMERS=y

and booting with "ignore_loglevel". Here is the log for two kernel boots.

wfg@bee ~/linux/obj-compiletest% kvm-0day.sh arch/x86/boot/bzImage

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.11.0-rc2-00010-gc817a67-dirty (wfg@bee) (gcc version 4.6.3 (Debian 4.6.3-1) ) #6 SMP PREEMPT Tue Oct 8 10:03:08 CST 2013
[    0.000000] Command line: hung_task_panic=1 rcutree.rcu_cpu_stall_timeout=100 log_buf_len=8M debug sched_debug ignore_loglevel apic=debug dynamic_printk sysrq_always_enabled panic=10 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal  root=/dev/ram0 rw
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000fffdfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000fffe000-0x000000000fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] debug: ignoring loglevel setting.
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] Hypervisor detected: KVM
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0xfffe max_arch_pfn = 0x400000000
[    0.000000] Scan for SMP in [mem 0x00000000-0x000003ff]
[    0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff]
[    0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff]
[    0.000000] found SMP MP-table at [mem 0x000f1840-0x000f184f] mapped at [ffff8800000f1840]
[    0.000000]   mpc: f1850-f193c
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x028a8000, 0x028a8fff] PGTABLE
[    0.000000] BRK [0x028a9000, 0x028a9fff] PGTABLE
[    0.000000] BRK [0x028aa000, 0x028aafff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x0e600000-0x0e7fffff]
[    0.000000]  [mem 0x0e600000-0x0e7fffff] page 4k
[    0.000000] BRK [0x028ab000, 0x028abfff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x0c000000-0x0e5fffff]
[    0.000000]  [mem 0x0c000000-0x0e5fffff] page 4k
[    0.000000] BRK [0x028ac000, 0x028acfff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x00100000-0x0bffffff]
[    0.000000]  [mem 0x00100000-0x0bffffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x0e800000-0x0fffdfff]
[    0.000000]  [mem 0x0e800000-0x0fffdfff] page 4k
[    0.000000] log_buf_len: 8388608
[    0.000000] early log buf free: 128348(97%)
[    0.000000] RAMDISK: [mem 0x0e8d6000-0x0ffeffff]
[    0.000000] ACPI: RSDP 00000000000f16b0 00014 (v00 BOCHS )
[    0.000000] ACPI: RSDT 000000000fffe3f0 00034 (v01 BOCHS  BXPCRSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACP 000000000fffff80 00074 (v01 BOCHS  BXPCFACP 00000001 BXPC 00000001)
[    0.000000] ACPI: DSDT 000000000fffe430 01137 (v01   BXPC   BXDSDT 00000001 INTL 20100528)
[    0.000000] ACPI: FACS 000000000fffff40 00040
[    0.000000] ACPI: SSDT 000000000ffff6a0 00899 (v01 BOCHS  BXPCSSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: APIC 000000000ffff5b0 00080 (v01 BOCHS  BXPCAPIC 00000001 BXPC 00000001)
[    0.000000] ACPI: HPET 000000000ffff570 00038 (v01 BOCHS  BXPCHPET 00000001 BXPC 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] mapped APIC to ffffffffff5bb000 (        fee00000)
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000000] kvm-clock: cpu 0, msr 0:e896001, boot clock
[    0.000000] Zone ranges:
[    0.000000]   DMA32    [mem 0x00001000-0xffffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0x0fffdfff]
[    0.000000] On node 0 totalpages: 65436
[    0.000000]   DMA32 zone: 1024 pages used for memmap
[    0.000000]   DMA32 zone: 21 pages reserved
[    0.000000]   DMA32 zone: 65436 pages, LIFO batch:15
[    0.000000] ACPI: PM-Timer IO Port: 0xb008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] mapped APIC to ffffffffff5bb000 (        fee00000)
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04
[    0.000000] ACPI: IRQ5 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ10 used by override.
[    0.000000] ACPI: IRQ11 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] mapped IOAPIC to ffffffffff5ba000 (fec00000)
[    0.000000] nr_irqs_gsi: 40
[    0.000000] e820: [mem 0x10000000-0xfeffbfff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on KVM
[    0.000000] setup_percpu: NR_CPUS:4096 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 25 pages/cpu @ffff88000dc00000 s77904 r0 d24496 u1048576
[    0.000000] pcpu-alloc: s77904 r0 d24496 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1
[    0.000000] kvm-clock: cpu 0, msr 0:e896001, primary cpu clock
[    0.000000] KVM setup async PF for cpu 0
[    0.000000] kvm-stealtime: cpu 0, msr dc0ccc0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 64391
[    0.000000] Kernel command line: hung_task_panic=1 rcutree.rcu_cpu_stall_timeout=100 log_buf_len=8M debug sched_debug ignore_loglevel apic=debug dynamic_printk sysrq_always_enabled panic=10 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal  root=/dev/ram0 rw
[    0.000000] PID hash table entries: 1024 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 199064K/261744K available (8558K kernel code, 1784K rwdata, 3968K rodata, 844K init, 10064K bss, 62680K reserved)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  RCU debugfs-based tracing is enabled.
[    0.000000]  Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000]  Additional per-CPU info printed with stalls.
[    0.000000]  RCU restricting CPUs from NR_CPUS=4096 to nr_cpu_ids=2.
[    0.000000] NR_IRQS:262400 nr_irqs:512 16
[    0.000000] console [ttyS0] enabled
[    0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[    0.000000] ... MAX_LOCKDEP_SUBCLASSES:  8
[    0.000000] ... MAX_LOCK_DEPTH:          48
[    0.000000] ... MAX_LOCKDEP_KEYS:        8191
[    0.000000] ... CLASSHASH_SIZE:          4096
[    0.000000] ... MAX_LOCKDEP_ENTRIES:     16384
[    0.000000] ... MAX_LOCKDEP_CHAINS:      32768
[    0.000000] ... CHAINHASH_SIZE:          16384
[    0.000000]  memory used by lock dependency info: 5855 kB
[    0.000000]  per task-struct memory footprint: 1920 bytes
[    0.000000] ODEBUG: 15 of 15 active objects replaced
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Detected 2693.508 MHz processor
[    0.008000] Calibrating delay loop (skipped) preset value.. 5387.01 BogoMIPS (lpj=10774032)
[    0.008000] pid_max: default: 32768 minimum: 301
[    0.008316] Mount-cache hash table entries: 256
[    0.009826] Initializing cgroup subsys devices
[    0.011770] Initializing cgroup subsys perf_event
[    0.012031] Initializing cgroup subsys net_prio
[    0.016209] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.016209] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.016209] tlb_flushall_shift: 6
[    0.020050] debug: unmapping init [mem 0xffffffff81ed0000-0xffffffff81ed3fff]
[    0.028645] ACPI: Core revision 20130517
[    0.034170] ACPI: All ACPI Tables successfully acquired
[    0.036460] Getting VERSION: 50014
[    0.040024] Getting VERSION: 50014
[    0.042141] Getting ID: 0
[    0.044026] Getting ID: ff000000
[    0.046033] Getting LVT0: 8700
[    0.048023] Getting LVT1: 8400
[    0.051332] enabled ExtINT on CPU#0
[    0.056011] ENABLING IO-APIC IRQs
[    0.058172] init IO_APIC IRQs
[    0.060014]  apic 0 pin 0 not connected
[    0.062460] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1)
[    0.064084] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1)
[    0.068068] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1)
[    0.072062] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1)
[    0.076058] IOAPIC[0]: Set routing entry (0-5 -> 0x35 -> IRQ 5 Mode:1 Active:0 Dest:1)
[    0.080057] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1)
[    0.084053] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1)
[    0.088060] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1)
[    0.092067] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:1)
[    0.096071] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:1)
[    0.100066] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:1)
[    0.104066] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1)
[    0.108061] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1)
[    0.112060] IOAPIC[0]: Set routing entry (0-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1)
[    0.116064] IOAPIC[0]: Set routing entry (0-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1)
[    0.120051]  apic 0 pin 16 not connected
[    0.122546]  apic 0 pin 17 not connected
[    0.124014]  apic 0 pin 18 not connected
[    0.128010]  apic 0 pin 19 not connected
[    0.130547]  apic 0 pin 20 not connected
[    0.132015]  apic 0 pin 21 not connected
[    0.136015]  apic 0 pin 22 not connected
[    0.138473]  apic 0 pin 23 not connected
[    0.140193] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.144011] smpboot: CPU0: Intel Common KVM processor (fam: 0f, model: 06, stepping: 01)
[    0.152013] Using local APIC timer interrupts.
[    0.152013] calibrating APIC timer ...
[    0.160000] ... lapic delta = 6250138
[    0.160000] ... PM-Timer delta = 357965
[    0.160000] ... PM-Timer result ok
[    0.160000] ..... delta 6250138
[    0.160000] ..... mult: 268441383
[    0.160000] ..... calibration result: 4000088
[    0.160000] ..... CPU clock speed is 2693.2050 MHz.
[    0.160000] ..... host bus clock speed is 1000.0088 MHz.
[    0.160123] Performance Events: unsupported Netburst CPU model 6 no PMU driver, software events only.
[    0.188704] SMP alternatives: lockdep: fixing up alternatives
[    0.190001] smpboot: Booting Node   0, Processors  #1 OK
[    0.008000] kvm-clock: cpu 1, msr 0:e896041, secondary cpu clock
[    0.008000] masked ExtINT on CPU#1
[    0.212067] KVM setup async PF for cpu 1
[    0.212180] Brought up 2 CPUs
[    0.212180] smpboot: Total of 2 processors activated (10774.03 BogoMIPS)
[    0.215718] kvm-stealtime: cpu 1, msr dd0ccc0
[    0.220087] devtmpfs: initialized
[    0.224150] atomic64 test passed for x86-64 platform with CX8 and with SSE
[    0.228706] regulator-dummy: no parameters
[    0.232321] NET: Registered protocol family 16
[    0.236568] ACPI: bus type PCI registered
[    0.239182] PCI: Using configuration type 1 for base access
[    0.252982] ACPI: Added _OSI(Module Device)
[    0.253830] ACPI: Added _OSI(Processor Device)
[    0.254687] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.256009] ACPI: Added _OSI(Processor Aggregator Device)
[    0.259290] ACPI: EC: Look up EC in DSDT
[    0.267251] ACPI: Interpreter enabled
[    0.268037] ACPI: (supports S0 S5)
[    0.270165] ACPI: Using IOAPIC for interrupt routing
[    0.272080] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.296528] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.300629] PCI host bridge to bus 0000:00
[    0.303206] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.304021] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.308015] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.312014] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.316019] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff]
[    0.320144] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[    0.330282] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[    0.336522] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
[    0.343635] pci 0000:00:01.1: reg 0x20: [io  0xc060-0xc06f]
[    0.349660] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
[    0.352693] pci 0000:00:01.3: quirk: [io  0xb000-0xb03f] claimed by PIIX4 ACPI
[    0.356053] pci 0000:00:01.3: quirk: [io  0xb100-0xb10f] claimed by PIIX4 SMB
[    0.364392] pci 0000:00:02.0: [1013:00b8] type 00 class 0x030000
[    0.368954] pci 0000:00:02.0: reg 0x10: [mem 0xfc000000-0xfdffffff pref]
[    0.373885] pci 0000:00:02.0: reg 0x14: [mem 0xfebe2000-0xfebe2fff]
[    0.388932] pci 0000:00:02.0: reg 0x30: [mem 0xfebd0000-0xfebdffff pref]
[    0.391120] pci 0000:00:03.0: [1af4:1000] type 00 class 0x020000
[    0.393333] pci 0000:00:03.0: reg 0x10: [io  0xc040-0xc05f]
[    0.396014] pci 0000:00:03.0: reg 0x14: [mem 0xfebe1000-0xfebe1fff]
[    0.403236] pci 0000:00:03.0: reg 0x30: [mem 0xfebc0000-0xfebcffff pref]
[    0.404775] pci 0000:00:04.0: [8086:100e] type 00 class 0x020000
[    0.409382] pci 0000:00:04.0: reg 0x10: [mem 0xfeb80000-0xfeb9ffff]
[    0.413072] pci 0000:00:04.0: reg 0x14: [io  0xc000-0xc03f]
[    0.420019] pci 0000:00:04.0: reg 0x30: [mem 0xfeba0000-0xfebbffff pref]
[    0.422323] pci 0000:00:05.0: [8086:25ab] type 00 class 0x088000
[    0.424767] pci 0000:00:05.0: reg 0x10: [mem 0xfebe0000-0xfebe000f]
[    0.431725] pci_bus 0000:00: on NUMA node 0
[    0.432051] acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[    0.434279] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
[    0.437989] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[    0.440889] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[    0.444521] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[    0.446505] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[    0.448519] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
[    0.451322] ACPI: Enabled 16 GPEs in block 00 to 0F
[    0.452030] ACPI: \_SB_.PCI0: notify handler is installed
[    0.453629] Found 1 acpi root devices
[    0.460206] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.462748] vgaarb: loaded
[    0.463598] vgaarb: bridge control possible 0000:00:02.0
[    0.464738] ACPI: bus type USB registered
[    0.468121] usbcore: registered new interface driver usbfs
[    0.469647] usbcore: registered new interface driver hub
[    0.471265] usbcore: registered new device driver usb
[    0.472212] pps_core: LinuxPPS API ver. 1 registered
[    0.473534] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[    0.476081] PTP clock support registered
[    0.477702] wmi: Mapper loaded
[    0.480107] PCI: Using ACPI for IRQ routing
[    0.481325] PCI: pci_cache_line_size set to 64 bytes
[    0.484253] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.486020] e820: reserve RAM buffer [mem 0x0fffe000-0x0fffffff]
[    0.489029] NET: Registered protocol family 23
[    0.491080] cfg80211: Calling CRDA to update world regulatory domain
[    0.492239] nfc: nfc_init: NFC Core ver 0.1
[    0.492970] NET: Registered protocol family 39
[    0.492970] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.496209] Switched to clocksource kvm-clock
[    0.497223] pnp: PnP ACPI init
[    0.497760] ACPI: bus type PNP registered
[    0.498392] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:3)
[    0.499849] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.501522] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:3)
[    0.503951] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.505628] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:3)
[    0.507607] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.509257] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:3)
[    0.511096] pnp 00:03: [dma 2]
[    0.511925] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.513484] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:3)
[    0.515459] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.517213] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:3)
[    0.519323] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.521341] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.523041] pnp: PnP ACPI: found 7 devices
[    0.524391] ACPI: bus type PNP unregistered
[    0.531387] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.532754] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.534044] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.535403] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff]
[    0.537269] NET: Registered protocol family 2
[    0.539173] TCP established hash table entries: 2048 (order: 3, 32768 bytes)
[    0.541005] TCP bind hash table entries: 2048 (order: 5, 131072 bytes)
[    0.542866] TCP: Hash tables configured (established 2048 bind 2048)
[    0.544564] TCP: reno registered
[    0.545345] UDP hash table entries: 256 (order: 3, 40960 bytes)
[    0.546777] UDP-Lite hash table entries: 256 (order: 3, 40960 bytes)
[    0.548877] NET: Registered protocol family 1
[    0.550645] RPC: Registered named UNIX socket transport module.
[    0.552194] RPC: Registered udp transport module.
[    0.553364] RPC: Registered tcp transport module.
[    0.554508] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.555980] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[    0.557353] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[    0.558710] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[    0.560224] pci 0000:00:02.0: Boot video device
[    0.561269] PCI: CLS 0 bytes, default 64
[    0.562457] Unpacking initramfs...
[    2.516338] debug: unmapping init [mem 0xffff88000e8d6000-0xffff88000ffeffff]
[    2.517945] has_svm: not amd
[    2.518311] kvm: no hardware support
[    2.519408] camellia-x86_64: performance on this CPU would be suboptimal: disabling camellia-x86_64.
[    2.521140] blowfish-x86_64: performance on this CPU would be suboptimal: disabling blowfish-x86_64.
[    2.526872] twofish-x86_64-3way: performance on this CPU would be suboptimal: disabling twofish-x86_64-3way.
[    2.528631] sha1_ssse3: Neither AVX nor SSSE3 is available/usable.
[    2.528719] cryptomgr_test (24) used greatest stack depth: 6320 bytes left
[    2.531042] sha256_ssse3: Neither AVX nor SSSE3 is available/usable.
[    2.532304] sha512_ssse3: Neither AVX nor SSSE3 is available/usable.
[    2.533567] AVX or AES-NI instructions are not detected.
[    2.534412] AVX instructions are not detected.
[    2.535210] AVX instructions are not detected.
[    2.536056] AVX instructions are not detected.
[    2.544063] Initializing RT-Tester: OK
[    2.544692] audit: initializing netlink socket (disabled)
[    2.545582] type=2000 audit(1378709047.986:1): initialized
[    2.549906] DLM installed
[    2.551558] NFS: Registering the id_resolver key type
[    2.555756] Key type id_resolver registered
[    2.556647] Key type id_legacy registered
[    2.557466] Installing knfsd (copyright (C) 1996 [email protected]).
[    2.559284] ROMFS MTD (C) 2007 Red Hat, Inc.
[    2.560321] fuse init (API version 7.22)
[    2.561738] ceph: loaded (mds proto 32)
[    2.564411] cryptomgr_test (43) used greatest stack depth: 5696 bytes left
[    2.575692] cryptomgr_test (72) used greatest stack depth: 5280 bytes left
[    2.581083] alg: No test for crc32 (crc32-table)
[    2.582949] alg: No test for lz4hc (lz4hc-generic)
[    2.599837] alg: No test for stdrng (krng)
[    2.602824] NET: Registered protocol family 38
[    2.604069] Key type asymmetric registered
[    2.605178] Asymmetric key parser 'x509' registered
[    2.606504] test_string_helpers: Running tests...
[    2.608629] crc32: CRC_LE_BITS = 32, CRC_BE BITS = 32
[    2.610014] crc32: self tests passed, processed 225944 bytes in 308809 nsec
[    2.612005] crc32c: CRC_LE_BITS = 32
[    2.612967] crc32c: self tests passed, processed 225944 bytes in 154301 nsec
[    2.615586] cr_bllcd: INTEL CARILLO RANCH LPC not found.
[    2.617128] cr_bllcd: Carillo Ranch Backlight Driver Initialized.
[    2.619201] VIA Graphics Integration Chipset framebuffer 2.4 initializing
[    2.621099] vmlfb: initializing
[    2.621922] Could not find Carillo Ranch MCH device.
[    2.623237] no IO addresses supplied
[    2.624404] hgafb: HGA card not detected.
[    2.625428] hgafb: probe of hgafb.0 failed with error -22
[    2.626842] usbcore: registered new interface driver udlfb
[    2.628264] usbcore: registered new interface driver smscufx
[    2.630814] uvesafb: failed to execute /sbin/v86d
[    2.632062] uvesafb: make sure that the v86d helper is installed and executable
[    2.633855] uvesafb: Getting VBE info block failed (eax=0x4f00, err=-2)
[    2.635660] uvesafb: vbe_init() failed with -22
[    2.636981] uvesafb: probe of uvesafb.0 failed with error -22
[    2.638761] ipmi message handler version 39.2
[    2.639819] ipmi device interface
[    2.640815] IPMI System Interface driver.
[    2.641928] ipmi_si: Adding default-specified kcs state machine
[    2.643342] ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
[    2.645947] ipmi_si: Interface detection failed
[    2.660232] ipmi_si: Adding default-specified smic state machine
[    2.661575] ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0
[    2.663578] ipmi_si: Interface detection failed
[    2.676160] ipmi_si: Adding default-specified bt state machine
[    2.677266] ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0
[    2.678956] ipmi_si: Interface detection failed
[    2.688369] kobject: 'ipmi_si' (ffff8800077ac600): kobject_release, parent ffff8800001b7648 (delayed)
[    2.690070] kobject: 'ipmi_si' (ffff8800077ac400): kobject_release, parent ffff880000221248 (delayed)
[    2.691569] kobject: 'ipmi_si' (ffff8800077ac800): kobject_release, parent ffff880000189248 (delayed)
[    2.693069] ipmi_si: Unable to find any System Interface(s)
[    2.694381] IPMI Watchdog: driver initialized
[    2.695402] Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot.
[    2.697710] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    2.700067] ACPI: Power Button [PWRF]
[    2.748211] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    2.772998] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    2.776086] Applicom driver: $Id: ac.c,v 1.30 2000/03/22 16:03:57 dwmw2 Exp $
[    2.777783] ac.o: No PCI boards found.
[    2.778746] ac.o: For an ISA board you must supply memory and irq parameters.
[    2.780870] Non-volatile memory driver v1.3
[    2.782013] Linux agpgart interface v0.103
[    2.783638] [drm:drm_core_init] *ERROR* Cannot create /proc/dri
[    2.785188] kobject: 'drm' (ffff880006dae048): kobject_release, parent ffff880000189648 (delayed)
[    2.787362] kobject: 'drm' (ffff880006dafe00): kobject_release, parent           (null) (delayed)
[    2.789674] [drm] radeon kernel modesetting enabled.
[    2.791798] [drm:drm_proc_init] *ERROR* Cannot create /proc/dri/0
[    2.793280] [drm:drm_get_minor] *ERROR* DRM: Failed to initialize /proc/dri.
[    2.795591] kobject: 'controlD64' (ffff880006dc3820): kobject_release, parent           (null) (delayed)
[    2.797988] cirrus: probe of 0000:00:02.0 failed with error -1
[    2.799675] usbcore: registered new interface driver udl
[    2.802167] parport_pc 00:04: reported by Plug and Play ACPI
[    2.803818] parport0: PC-style at 0x378, irq 7 [PCSPP(,...)]
[    2.806035] kobject: 'parport_pc.956' (ffff880006dc3820): kobject_release, parent           (null) (delayed)
[    2.808626] ------------[ cut here ]------------
[    2.809776] WARNING: CPU: 1 PID: 1 at /c/wfg/linux/lib/debugobjects.c:260 debug_print_object+0x7c/0x8d()
[    2.812433] ODEBUG: init active (active state 0) object type: timer_list hint:           (null)
[    2.812579] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.11.0-rc2-00010-gc817a67-dirty #6
[    2.812579]  0000000000000104 ffff88000010db78 ffffffff8184ea6e 0000000000000000
[    2.812579]  ffff88000010dbc8 ffff88000010dbb8 ffffffff8108f38d 0000000000000046
[    2.812579]  ffffffff81223681 ffffffff81c20277 ffff880006d92ee8 ffffffff81c602d0
[    2.812579] Call Trace:
[    2.812579]  [<ffffffff8184ea6e>] dump_stack+0x4f/0x84
[    2.812579]  [<ffffffff8108f38d>] warn_slowpath_common+0x72/0x8c
[    2.812579]  [<ffffffff81223681>] ? debug_print_object+0x7c/0x8d
[    2.812579]  [<ffffffff8108f40b>] warn_slowpath_fmt+0x41/0x43
[    2.812579]  [<ffffffff81223681>] debug_print_object+0x7c/0x8d
[    2.812579]  [<ffffffff812239e0>] __debug_object_init+0x27c/0x2c6
[    2.812579]  [<ffffffff81223a1b>] ? __debug_object_init+0x2b7/0x2c6
[    2.812579]  [<ffffffff81223a3e>] debug_object_init+0x14/0x16
[    2.812579]  [<ffffffff810992e8>] init_timer_key+0x23/0x65
[    2.812579]  [<ffffffff8121352f>] kobject_release+0x90/0xba
[    2.812579]  [<ffffffff812137ac>] kobject_put+0x4d/0x51
[    2.812579]  [<ffffffff81482cfb>] put_device+0x12/0x14
[    2.812579]  [<ffffffff814873a2>] platform_device_put+0x12/0x14
[    2.812579]  [<ffffffff81487727>] platform_device_unregister+0x16/0x1a
[    2.812579]  [<ffffffff814810f9>] parport_pc_probe_port+0x7c4/0x7d9
[    2.812579]  [<ffffffff81e36c75>] parport_pc_init+0x2b0/0x317
[    2.812579]  [<ffffffff81e369c5>] ? parport_setup+0x147/0x147
[    2.812579]  [<ffffffff81e11e0c>] do_one_initcall+0x8e/0x132
[    2.812579]  [<ffffffff810a7000>] ? param_array_set+0x7f/0xf2
[    2.812579]  [<ffffffff810a7275>] ? parse_args+0x1ad/0x26c
[    2.812579]  [<ffffffff81e11fe2>] kernel_init_freeable+0x132/0x1bc
[    2.812579]  [<ffffffff81e116e3>] ? do_early_param+0x86/0x86
[    2.812579]  [<ffffffff818488bf>] ? rest_init+0xc3/0xc3
[    2.812579]  [<ffffffff818488c8>] kernel_init+0x9/0xcc
[    2.812579]  [<ffffffff81859e3c>] ret_from_fork+0x7c/0xb0
[    2.812579]  [<ffffffff818488bf>] ? rest_init+0xc3/0xc3
[    2.812579] ---[ end trace ce7dd707bef7dc3e ]---
[    2.863098] INFO: trying to register non-static key.
[    2.864466] the code is fine but needs lockdep annotation.
[    2.865862] turning off the locking correctness validator.
[    2.867041] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G        W    3.11.0-rc2-00010-gc817a67-dirty #6
[    2.867041]  0000000000000000 ffff88000010da28 ffffffff8184ea6e 0000000000000000
[    2.867041]  0000000000000000 ffff88000010daa8 ffffffff810c5e5a ffff88000010da88
[    2.867041]  ffffffff810907e4 0000000000007a4c 0000000000000046 ffff88000010da78
[    2.867041] Call Trace:
[    2.867041]  [<ffffffff8184ea6e>] dump_stack+0x4f/0x84
[    2.867041]  [<ffffffff810c5e5a>] register_lock_class+0x104/0x2d8
[    2.867041]  [<ffffffff810907e4>] ? console_unlock+0x35b/0x36a
[    2.867041]  [<ffffffff810c744b>] ? trace_hardirqs_off_caller+0x33/0xa0
[    2.867041]  [<ffffffff810c813b>] __lock_acquire+0xf6/0xe51
[    2.867041]  [<ffffffff81859677>] ? retint_restore_args+0x13/0x13
[    2.867041]  [<ffffffff810c73d2>] ? trace_hardirqs_on_caller+0x154/0x18b
[    2.867041]  [<ffffffff810c92bf>] lock_acquire+0x7e/0x99
[    2.867041]  [<ffffffff8109962b>] ? try_to_del_timer_sync+0x5f/0x5f
[    2.867041]  [<ffffffff81099674>] del_timer_sync+0x49/0xcb
[    2.867041]  [<ffffffff8109962b>] ? try_to_del_timer_sync+0x5f/0x5f
[    2.867041]  [<ffffffff810cde75>] ? arch_local_irq_restore+0x6/0xd
[    2.867041]  [<ffffffff8109973a>] timer_fixup_init+0x16/0x2f
[    2.867041]  [<ffffffff812234ba>] debug_object_fixup+0x15/0x1d
[    2.867041]  [<ffffffff812239ff>] __debug_object_init+0x29b/0x2c6
[    2.867041]  [<ffffffff81223a1b>] ? __debug_object_init+0x2b7/0x2c6
[    2.867041]  [<ffffffff81223a3e>] debug_object_init+0x14/0x16
[    2.867041]  [<ffffffff810992e8>] init_timer_key+0x23/0x65
[    2.867041]  [<ffffffff8121352f>] kobject_release+0x90/0xba
[    2.867041]  [<ffffffff812137ac>] kobject_put+0x4d/0x51
[    2.867041]  [<ffffffff81482cfb>] put_device+0x12/0x14
[    2.867041]  [<ffffffff814873a2>] platform_device_put+0x12/0x14
[    2.867041]  [<ffffffff81487727>] platform_device_unregister+0x16/0x1a
[    2.867041]  [<ffffffff814810f9>] parport_pc_probe_port+0x7c4/0x7d9
[    2.867041]  [<ffffffff81e36c75>] parport_pc_init+0x2b0/0x317
[    2.867041]  [<ffffffff81e369c5>] ? parport_setup+0x147/0x147
[    2.867041]  [<ffffffff81e11e0c>] do_one_initcall+0x8e/0x132
[    2.867041]  [<ffffffff810a7000>] ? param_array_set+0x7f/0xf2
[    2.867041]  [<ffffffff810a7275>] ? parse_args+0x1ad/0x26c
[    2.867041]  [<ffffffff81e11fe2>] kernel_init_freeable+0x132/0x1bc
[    2.867041]  [<ffffffff81e116e3>] ? do_early_param+0x86/0x86
[    2.867041]  [<ffffffff818488bf>] ? rest_init+0xc3/0xc3
[    2.867041]  [<ffffffff818488c8>] kernel_init+0x9/0xcc
[    2.867041]  [<ffffffff81859e3c>] ret_from_fork+0x7c/0xb0
[    2.867041]  [<ffffffff818488bf>] ? rest_init+0xc3/0xc3
[    3.516155] tsc: Refined TSC clocksource calibration: 2693.463 MHz
[    3.796079] BUG: unable to handle kernel NULL pointer dereference at           (null)
[    3.798252] IP: [<          (null)>]           (null)
[    3.799447] PGD 0
[    3.799956] Oops: 0010 [#1] PREEMPT SMP DEBUG_PAGEALLOC
[    3.800042] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G        W    3.11.0-rc2-00010-gc817a67-dirty #6
[    3.800042] task: ffff88000010a040 ti: ffff88000010c000 task.ti: ffff88000010c000
[    3.800042] RIP: 0010:[<0000000000000000>]  [<          (null)>]           (null)
[    3.800042] RSP: 0000:ffff88000dd03e40  EFLAGS: 00010286
[    3.800042] RAX: 0000000000000000 RBX: 0000000000000100 RCX: 0000000000000000
[    3.800042] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
[    3.800042] RBP: ffff88000dd03e98 R08: 0000000000000002 R09: 0000000000000000
[    3.800042] R10: ffff88000dd03e58 R11: ffff88000015c000 R12: ffff88000010dfd8
[    3.800042] R13: 0000000000000000 R14: 0000000000000000 R15: ffff88000015d058
[    3.800042] FS:  0000000000000000(0000) GS:ffff88000dd00000(0000) knlGS:0000000000000000
[    3.800042] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[    3.800042] CR2: 0000000000000000 CR3: 0000000001c47000 CR4: 00000000000006a0
[    3.800042] Stack:
[    3.800042]  ffffffff810989e6 ffffffff8109897b ffff88000015c000 ffff880006dc38d8
[    3.800042]  0000000000000000 0000000000000000 0000000000000000 ffff88000015c000
[    3.800042]  ffff88000dd03ec8 ffff88000015d858 ffff88000015d458 ffff88000dd03f08
[    3.800042] Call Trace:
[    3.800042]  <IRQ>
[    3.800042]  [<ffffffff810989e6>] ? call_timer_fn+0x6b/0xde
[    3.800042]  [<ffffffff8109897b>] ? detach_timer+0x46/0x46
[    3.800042]  [<ffffffff81098fcb>] run_timer_softirq+0x187/0x1cf
[    3.800042]  [<ffffffff8109555f>] __do_softirq+0xc6/0x18f
[    3.800042]  [<ffffffff81095745>] irq_exit+0x58/0x9e
[    3.800042]  [<ffffffff81044e69>] smp_apic_timer_interrupt+0x31/0x3e
[    3.800042]  [<ffffffff8185ab72>] apic_timer_interrupt+0x72/0x80
[    3.800042]  <EOI>
[    3.800042]  [<ffffffff81859677>] ? retint_restore_args+0x13/0x13
[    3.800042]  [<ffffffff810990a2>] ? lock_timer_base.isra.17+0x49/0x4b
[    3.800042]  [<ffffffff810995f3>] try_to_del_timer_sync+0x27/0x5f
[    3.800042]  [<ffffffff81098801>] ? arch_local_irq_restore+0x6/0xd
[    3.800042]  [<ffffffff810996e3>] del_timer_sync+0xb8/0xcb
[    3.800042]  [<ffffffff8109962b>] ? try_to_del_timer_sync+0x5f/0x5f
[    3.800042]  [<ffffffff810cde75>] ? arch_local_irq_restore+0x6/0xd
[    3.800042]  [<ffffffff8109973a>] timer_fixup_init+0x16/0x2f
[    3.800042]  [<ffffffff812234ba>] debug_object_fixup+0x15/0x1d
[    3.800042]  [<ffffffff812239ff>] __debug_object_init+0x29b/0x2c6
[    3.800042]  [<ffffffff81223a1b>] ? __debug_object_init+0x2b7/0x2c6
[    3.800042]  [<ffffffff81223a3e>] debug_object_init+0x14/0x16
[    3.800042]  [<ffffffff810992e8>] init_timer_key+0x23/0x65
[    3.800042]  [<ffffffff8121352f>] kobject_release+0x90/0xba
[    3.800042]  [<ffffffff812137ac>] kobject_put+0x4d/0x51
[    3.800042]  [<ffffffff81482cfb>] put_device+0x12/0x14
[    3.800042]  [<ffffffff814873a2>] platform_device_put+0x12/0x14
[    3.800042]  [<ffffffff81487727>] platform_device_unregister+0x16/0x1a
[    3.800042]  [<ffffffff814810f9>] parport_pc_probe_port+0x7c4/0x7d9
[    3.800042]  [<ffffffff81e36c75>] parport_pc_init+0x2b0/0x317
[    3.800042]  [<ffffffff81e369c5>] ? parport_setup+0x147/0x147
[    3.800042]  [<ffffffff81e11e0c>] do_one_initcall+0x8e/0x132
[    3.800042]  [<ffffffff810a7000>] ? param_array_set+0x7f/0xf2
[    3.800042]  [<ffffffff810a7275>] ? parse_args+0x1ad/0x26c
[    3.800042]  [<ffffffff81e11fe2>] kernel_init_freeable+0x132/0x1bc
[    3.800042]  [<ffffffff81e116e3>] ? do_early_param+0x86/0x86
[    3.800042]  [<ffffffff818488bf>] ? rest_init+0xc3/0xc3
[    3.800042]  [<ffffffff818488c8>] kernel_init+0x9/0xcc
[    3.800042]  [<ffffffff81859e3c>] ret_from_fork+0x7c/0xb0
[    3.800042]  [<ffffffff818488bf>] ? rest_init+0xc3/0xc3
[    3.800042] Code:  Bad RIP value.
[    3.800042] RIP  [<          (null)>]           (null)
[    3.800042]  RSP <ffff88000dd03e40>
[    3.800042] CR2: 0000000000000000
[    3.940037] ---[ end trace ce7dd707bef7dc3f ]---
[    3.941218] Kernel panic - not syncing: Fatal exception in interrupt
[    3.943251] Rebooting in 10 seconds..%                                                                                                  wfg@bee ~/linux/obj-compiletest%
wfg@bee ~/linux/obj-compiletest% kvm-0day.sh arch/x86/boot/bzImage
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.11.0-rc2-00010-gc817a67-dirty (wfg@bee) (gcc version 4.6.3 (Debian 4.6.3-1) ) #6 SMP PREEMPT Tue Oct 8 10:03:08 CST 2013
[    0.000000] Command line: hung_task_panic=1 rcutree.rcu_cpu_stall_timeout=100 log_buf_len=8M debug sched_debug ignore_loglevel apic=debug dynamic_printk sysrq_always_enabled panic=10 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal  root=/dev/ram0 rw
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000fffdfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000fffe000-0x000000000fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] debug: ignoring loglevel setting.
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] Hypervisor detected: KVM
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0xfffe max_arch_pfn = 0x400000000
[    0.000000] Scan for SMP in [mem 0x00000000-0x000003ff]
[    0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff]
[    0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff]
[    0.000000] found SMP MP-table at [mem 0x000f1840-0x000f184f] mapped at [ffff8800000f1840]
[    0.000000]   mpc: f1850-f193c
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x028a8000, 0x028a8fff] PGTABLE
[    0.000000] BRK [0x028a9000, 0x028a9fff] PGTABLE
[    0.000000] BRK [0x028aa000, 0x028aafff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x0e600000-0x0e7fffff]
[    0.000000]  [mem 0x0e600000-0x0e7fffff] page 4k
[    0.000000] BRK [0x028ab000, 0x028abfff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x0c000000-0x0e5fffff]
[    0.000000]  [mem 0x0c000000-0x0e5fffff] page 4k
[    0.000000] BRK [0x028ac000, 0x028acfff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x00100000-0x0bffffff]
[    0.000000]  [mem 0x00100000-0x0bffffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x0e800000-0x0fffdfff]
[    0.000000]  [mem 0x0e800000-0x0fffdfff] page 4k
[    0.000000] log_buf_len: 8388608
[    0.000000] early log buf free: 128348(97%)
[    0.000000] RAMDISK: [mem 0x0e8d6000-0x0ffeffff]
[    0.000000] ACPI: RSDP 00000000000f16b0 00014 (v00 BOCHS )
[    0.000000] ACPI: RSDT 000000000fffe3f0 00034 (v01 BOCHS  BXPCRSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACP 000000000fffff80 00074 (v01 BOCHS  BXPCFACP 00000001 BXPC 00000001)
[    0.000000] ACPI: DSDT 000000000fffe430 01137 (v01   BXPC   BXDSDT 00000001 INTL 20100528)
[    0.000000] ACPI: FACS 000000000fffff40 00040
[    0.000000] ACPI: SSDT 000000000ffff6a0 00899 (v01 BOCHS  BXPCSSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: APIC 000000000ffff5b0 00080 (v01 BOCHS  BXPCAPIC 00000001 BXPC 00000001)
[    0.000000] ACPI: HPET 000000000ffff570 00038 (v01 BOCHS  BXPCHPET 00000001 BXPC 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] mapped APIC to ffffffffff5bb000 (        fee00000)
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000000] kvm-clock: cpu 0, msr 0:e896001, boot clock
[    0.000000] Zone ranges:
[    0.000000]   DMA32    [mem 0x00001000-0xffffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0x0fffdfff]
[    0.000000] On node 0 totalpages: 65436
[    0.000000]   DMA32 zone: 1024 pages used for memmap
[    0.000000]   DMA32 zone: 21 pages reserved
[    0.000000]   DMA32 zone: 65436 pages, LIFO batch:15
[    0.000000] ACPI: PM-Timer IO Port: 0xb008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] mapped APIC to ffffffffff5bb000 (        fee00000)
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04
[    0.000000] ACPI: IRQ5 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ10 used by override.
[    0.000000] ACPI: IRQ11 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] mapped IOAPIC to ffffffffff5ba000 (fec00000)
[    0.000000] nr_irqs_gsi: 40
[    0.000000] e820: [mem 0x10000000-0xfeffbfff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on KVM
[    0.000000] setup_percpu: NR_CPUS:4096 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 25 pages/cpu @ffff88000dc00000 s77904 r0 d24496 u1048576
[    0.000000] pcpu-alloc: s77904 r0 d24496 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1
[    0.000000] kvm-clock: cpu 0, msr 0:e896001, primary cpu clock
[    0.000000] KVM setup async PF for cpu 0
[    0.000000] kvm-stealtime: cpu 0, msr dc0ccc0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 64391
[    0.000000] Kernel command line: hung_task_panic=1 rcutree.rcu_cpu_stall_timeout=100 log_buf_len=8M debug sched_debug ignore_loglevel apic=debug dynamic_printk sysrq_always_enabled panic=10 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal  root=/dev/ram0 rw
[    0.000000] PID hash table entries: 1024 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 199064K/261744K available (8558K kernel code, 1784K rwdata, 3968K rodata, 844K init, 10064K bss, 62680K reserved)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  RCU debugfs-based tracing is enabled.
[    0.000000]  Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000]  Additional per-CPU info printed with stalls.
[    0.000000]  RCU restricting CPUs from NR_CPUS=4096 to nr_cpu_ids=2.
[    0.000000] NR_IRQS:262400 nr_irqs:512 16
[    0.000000] console [ttyS0] enabled
[    0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[    0.000000] ... MAX_LOCKDEP_SUBCLASSES:  8
[    0.000000] ... MAX_LOCK_DEPTH:          48
[    0.000000] ... MAX_LOCKDEP_KEYS:        8191
[    0.000000] ... CLASSHASH_SIZE:          4096
[    0.000000] ... MAX_LOCKDEP_ENTRIES:     16384
[    0.000000] ... MAX_LOCKDEP_CHAINS:      32768
[    0.000000] ... CHAINHASH_SIZE:          16384
[    0.000000]  memory used by lock dependency info: 5855 kB
[    0.000000]  per task-struct memory footprint: 1920 bytes
[    0.000000] ODEBUG: 15 of 15 active objects replaced
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Detected 2693.508 MHz processor
[    0.008000] Calibrating delay loop (skipped) preset value.. 5387.01 BogoMIPS (lpj=10774032)
[    0.008014] pid_max: default: 32768 minimum: 301
[    0.009283] Mount-cache hash table entries: 256
[    0.012065] Initializing cgroup subsys devices
[    0.013312] Initializing cgroup subsys perf_event
[    0.014562] Initializing cgroup subsys net_prio
[    0.015855] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.015855] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.015855] tlb_flushall_shift: 6
[    0.016052] debug: unmapping init [mem 0xffffffff81ed0000-0xffffffff81ed3fff]
[    0.020896] ACPI: Core revision 20130517
[    0.024485] ACPI: All ACPI Tables successfully acquired
[    0.025852] Getting VERSION: 50014
[    0.026522] Getting VERSION: 50014
[    0.027164] Getting ID: 0
[    0.027658] Getting ID: ff000000
[    0.028029] Getting LVT0: 8700
[    0.028865] Getting LVT1: 8400
[    0.029725] enabled ExtINT on CPU#0
[    0.032835] ENABLING IO-APIC IRQs
[    0.035067] init IO_APIC IRQs
[    0.036026]  apic 0 pin 0 not connected
[    0.040061] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1)
[    0.041439] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1)
[    0.044075] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1)
[    0.046150] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1)
[    0.048056] IOAPIC[0]: Set routing entry (0-5 -> 0x35 -> IRQ 5 Mode:1 Active:0 Dest:1)
[    0.052053] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1)
[    0.053431] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1)
[    0.056044] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1)
[    0.058534] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:1)
[    0.060059] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:1)
[    0.062489] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:1)
[    0.064058] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1)
[    0.068046] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1)
[    0.070212] IOAPIC[0]: Set routing entry (0-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1)
[    0.072067] IOAPIC[0]: Set routing entry (0-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1)
[    0.076042]  apic 0 pin 16 not connected
[    0.077071]  apic 0 pin 17 not connected
[    0.078192]  apic 0 pin 18 not connected
[    0.080016]  apic 0 pin 19 not connected
[    0.081411]  apic 0 pin 20 not connected
[    0.082403]  apic 0 pin 21 not connected
[    0.083447]  apic 0 pin 22 not connected
[    0.084018]  apic 0 pin 23 not connected
[    0.085207] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.088019] smpboot: CPU0: Intel Common KVM processor (fam: 0f, model: 06, stepping: 01)
[    0.090632] Using local APIC timer interrupts.
[    0.090632] calibrating APIC timer ...
[    0.096000] ... lapic delta = 6252850
[    0.096000] ... PM-Timer delta = 358097
[    0.096000] ... PM-Timer result ok
[    0.096000] ..... delta 6252850
[    0.096000] ..... mult: 268557862
[    0.096000] ..... calibration result: 4001824
[    0.096000] ..... CPU clock speed is 2694.2010 MHz.
[    0.096000] ..... host bus clock speed is 1000.1824 MHz.
[    0.096124] Performance Events: unsupported Netburst CPU model 6 no PMU driver, software events only.
[    0.124680] SMP alternatives: lockdep: fixing up alternatives
[    0.125979] smpboot: Booting Node   0, Processors  #1 OK
[    0.008000] kvm-clock: cpu 1, msr 0:e896041, secondary cpu clock
[    0.008000] masked ExtINT on CPU#1
[    0.144326] Brought up 2 CPUs
[    0.148010] smpboot: Total of 2 processors activated (10774.03 BogoMIPS)
[    0.148030] KVM setup async PF for cpu 1
[    0.149476] kvm-stealtime: cpu 1, msr dd0ccc0
[    0.156081] devtmpfs: initialized
[    0.158681] atomic64 test passed for x86-64 platform with CX8 and with SSE
[    0.160566] regulator-dummy: no parameters
[    0.164009] NET: Registered protocol family 16
[    0.167013] ACPI: bus type PCI registered
[    0.168090] PCI: Using configuration type 1 for base access
[    0.184154] ACPI: Added _OSI(Module Device)
[    0.188010] ACPI: Added _OSI(Processor Device)
[    0.189135] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.190322] ACPI: Added _OSI(Processor Aggregator Device)
[    0.198032] ACPI: EC: Look up EC in DSDT
[    0.204857] ACPI: Interpreter enabled
[    0.205961] ACPI: (supports S0 S5)
[    0.206844] ACPI: Using IOAPIC for interrupt routing
[    0.208085] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.226725] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.228521] PCI host bridge to bus 0000:00
[    0.229731] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.231040] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.232015] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.233723] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.236025] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff]
[    0.237867] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[    0.240716] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[    0.242911] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
[    0.247373] pci 0000:00:01.1: reg 0x20: [io  0xc060-0xc06f]
[    0.252962] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
[    0.255051] pci 0000:00:01.3: quirk: [io  0xb000-0xb03f] claimed by PIIX4 ACPI
[    0.256044] pci 0000:00:01.3: quirk: [io  0xb100-0xb10f] claimed by PIIX4 SMB
[    0.260534] pci 0000:00:02.0: [1013:00b8] type 00 class 0x030000
[    0.269902] pci 0000:00:02.0: reg 0x10: [mem 0xfc000000-0xfdffffff pref]
[    0.280846] pci 0000:00:02.0: reg 0x14: [mem 0xfebe2000-0xfebe2fff]
[    0.294951] pci 0000:00:02.0: reg 0x30: [mem 0xfebd0000-0xfebdffff pref]
[    0.296944] pci 0000:00:03.0: [1af4:1000] type 00 class 0x020000
[    0.301342] pci 0000:00:03.0: reg 0x10: [io  0xc040-0xc05f]
[    0.304014] pci 0000:00:03.0: reg 0x14: [mem 0xfebe1000-0xfebe1fff]
[    0.312017] pci 0000:00:03.0: reg 0x30: [mem 0xfebc0000-0xfebcffff pref]
[    0.314493] pci 0000:00:04.0: [8086:100e] type 00 class 0x020000
[    0.318666] pci 0000:00:04.0: reg 0x10: [mem 0xfeb80000-0xfeb9ffff]
[    0.324016] pci 0000:00:04.0: reg 0x14: [io  0xc000-0xc03f]
[    0.334321] pci 0000:00:04.0: reg 0x30: [mem 0xfeba0000-0xfebbffff pref]
[    0.340512] pci 0000:00:05.0: [8086:25ab] type 00 class 0x088000
[    0.344793] pci 0000:00:05.0: reg 0x10: [mem 0xfebe0000-0xfebe000f]
[    0.354855] pci_bus 0000:00: on NUMA node 0
[    0.356060] acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[    0.358553] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
[    0.361801] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[    0.364806] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[    0.368089] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[    0.370283] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[    0.372133] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
[    0.374863] ACPI: Enabled 16 GPEs in block 00 to 0F
[    0.376030] ACPI: \_SB_.PCI0: notify handler is installed
[    0.377608] Found 1 acpi root devices
[    0.381053] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.382144] vgaarb: loaded
[    0.384009] vgaarb: bridge control possible 0000:00:02.0
[    0.385779] ACPI: bus type USB registered
[    0.388109] usbcore: registered new interface driver usbfs
[    0.389486] usbcore: registered new interface driver hub
[    0.390974] usbcore: registered new device driver usb
[    0.392204] pps_core: LinuxPPS API ver. 1 registered
[    0.393152] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[    0.394913] PTP clock support registered
[    0.396412] wmi: Mapper loaded
[    0.397318] PCI: Using ACPI for IRQ routing
[    0.398279] PCI: pci_cache_line_size set to 64 bytes
[    0.399380] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.400032] e820: reserve RAM buffer [mem 0x0fffe000-0x0fffffff]
[    0.402853] NET: Registered protocol family 23
[    0.405468] cfg80211: Calling CRDA to update world regulatory domain
[    0.408532] nfc: nfc_init: NFC Core ver 0.1
[    0.409575] NET: Registered protocol family 39
[    0.412580] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.420103] Switched to clocksource kvm-clock
[    0.421942] pnp: PnP ACPI init
[    0.422815] ACPI: bus type PNP registered
[    0.424055] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:3)
[    0.426218] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.427982] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:3)
[    0.430940] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.433470] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:3)
[    0.435710] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.437450] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:3)
[    0.439696] pnp 00:03: [dma 2]
[    0.440658] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.442422] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:3)
[    0.445911] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.447617] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:3)
[    0.449862] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.452297] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.455436] pnp: PnP ACPI: found 7 devices
[    0.457339] ACPI: bus type PNP unregistered
[    0.465411] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.466801] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.470348] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.475305] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff]
[    0.479840] NET: Registered protocol family 2
[    0.482036] TCP established hash table entries: 2048 (order: 3, 32768 bytes)
[    0.486547] TCP bind hash table entries: 2048 (order: 5, 131072 bytes)
[    0.492225] TCP: Hash tables configured (established 2048 bind 2048)
[    0.494850] TCP: reno registered
[    0.497568] UDP hash table entries: 256 (order: 3, 40960 bytes)
[    0.502215] UDP-Lite hash table entries: 256 (order: 3, 40960 bytes)
[    0.509049] NET: Registered protocol family 1
[    0.520899] RPC: Registered named UNIX socket transport module.
[    0.524920] RPC: Registered udp transport module.
[    0.527946] RPC: Registered tcp transport module.
[    0.530970] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.535125] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[    0.539003] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[    0.542927] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[    0.544932] pci 0000:00:02.0: Boot video device
[    0.546059] PCI: CLS 0 bytes, default 64
[    0.547393] Unpacking initramfs...
[    2.413896] debug: unmapping init [mem 0xffff88000e8d6000-0xffff88000ffeffff]
[    2.417719] has_svm: not amd
[    2.418473] kvm: no hardware support
[    2.419790] camellia-x86_64: performance on this CPU would be suboptimal: disabling camellia-x86_64.
[    2.423888] blowfish-x86_64: performance on this CPU would be suboptimal: disabling blowfish-x86_64.
[    2.430234] cryptomgr_test (24) used greatest stack depth: 6224 bytes left
[    2.430241] twofish-x86_64-3way: performance on this CPU would be suboptimal: disabling twofish-x86_64-3way.
[    2.430251] sha1_ssse3: Neither AVX nor SSSE3 is available/usable.
[    2.430253] sha256_ssse3: Neither AVX nor SSSE3 is available/usable.
[    2.430254] sha512_ssse3: Neither AVX nor SSSE3 is available/usable.
[    2.430255] AVX or AES-NI instructions are not detected.
[    2.430256] AVX instructions are not detected.
[    2.430270] AVX instructions are not detected.
[    2.430272] AVX instructions are not detected.
[    2.461428] Initializing RT-Tester: OK
[    2.462139] audit: initializing netlink socket (disabled)
[    2.463243] type=2000 audit(1378709048.086:1): initialized
[    2.473933] DLM installed
[    2.477193] NFS: Registering the id_resolver key type
[    2.479252] Key type id_resolver registered
[    2.480479] Key type id_legacy registered
[    2.481501] Installing knfsd (copyright (C) 1996 [email protected]).
[    2.484505] ROMFS MTD (C) 2007 Red Hat, Inc.
[    2.486279] fuse init (API version 7.22)
[    2.488216] ceph: loaded (mds proto 32)
[    2.504162] cryptomgr_test (43) used greatest stack depth: 5768 bytes left
[    2.526085] cryptomgr_test (72) used greatest stack depth: 5352 bytes left
[    2.530361] alg: No test for crc32 (crc32-table)
[    2.532132] cryptomgr_test (80) used greatest stack depth: 5008 bytes left
[    2.532528] alg: No test for lz4hc (lz4hc-generic)
[    2.532639] alg: No test for stdrng (krng)
[    2.532890] NET: Registered protocol family 38
[    2.532938] Key type asymmetric registered
[    2.532958] Asymmetric key parser 'x509' registered
[    2.532960] test_string_helpers: Running tests...
[    2.538602] crc32: CRC_LE_BITS = 32, CRC_BE BITS = 32
[    2.540168] crc32: self tests passed, processed 225944 bytes in 304358 nsec
[    2.542213] crc32c: CRC_LE_BITS = 32
[    2.543439] crc32c: self tests passed, processed 225944 bytes in 151613 nsec
[    2.546191] cr_bllcd: INTEL CARILLO RANCH LPC not found.
[    2.547546] cr_bllcd: Carillo Ranch Backlight Driver Initialized.
[    2.549529] VIA Graphics Integration Chipset framebuffer 2.4 initializing
[    2.551331] vmlfb: initializing
[    2.552321] Could not find Carillo Ranch MCH device.
[    2.554636] no IO addresses supplied
[    2.556542] hgafb: HGA card not detected.
[    2.557567] hgafb: probe of hgafb.0 failed with error -22
[    2.558920] usbcore: registered new interface driver udlfb
[    2.560837] usbcore: registered new interface driver smscufx
[    2.563345] uvesafb: failed to execute /sbin/v86d
[    2.564360] uvesafb: make sure that the v86d helper is installed and executable
[    2.565725] uvesafb: Getting VBE info block failed (eax=0x4f00, err=-2)
[    2.566873] uvesafb: vbe_init() failed with -22
[    2.567710] uvesafb: probe of uvesafb.0 failed with error -22
[    2.568814] ipmi message handler version 39.2
[    2.569560] ipmi device interface
[    2.570275] IPMI System Interface driver.
[    2.571082] ipmi_si: Adding default-specified kcs state machine
[    2.572494] ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
[    2.574876] ipmi_si: Interface detection failed
[    2.584184] ipmi_si: Adding default-specified smic state machine
[    2.585201] ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0
[    2.586643] ipmi_si: Interface detection failed
[    2.596475] ipmi_si: Adding default-specified bt state machine
[    2.597615] ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0
[    2.599306] ipmi_si: Interface detection failed
[    2.612491] kobject: 'ipmi_si' (ffff8800077a7c00): kobject_release, parent ffff8800001b7648 (delayed)
[    2.614180] kobject: 'ipmi_si' (ffff8800077a7a00): kobject_release, parent ffff880000221248 (delayed)
[    2.615854] kobject: 'ipmi_si' (ffff8800077a7e00): kobject_release, parent ffff880000189248 (delayed)
[    2.618018] ipmi_si: Unable to find any System Interface(s)
[    2.621129] IPMI Watchdog: driver initialized
[    2.623943] Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot.
[    2.629342] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    2.634175] ACPI: Power Button [PWRF]
[    2.729623] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    2.757438] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    2.762864] Applicom driver: $Id: ac.c,v 1.30 2000/03/22 16:03:57 dwmw2 Exp $
[    2.768339] ac.o: No PCI boards found.
[    2.771569] ac.o: For an ISA board you must supply memory and irq parameters.
[    2.776227] Non-volatile memory driver v1.3
[    2.777300] Linux agpgart interface v0.103
[    2.779021] [drm:drm_core_init] *ERROR* Cannot create /proc/dri
[    2.780618] kobject: 'drm' (ffff880006daf848): kobject_release, parent ffff880000189648 (delayed)
[    2.782833] kobject: 'drm' (ffff880006dad400): kobject_release, parent           (null) (delayed)
[    2.785596] [drm] radeon kernel modesetting enabled.
[    2.787831] [drm:drm_proc_init] *ERROR* Cannot create /proc/dri/0
[    2.789363] [drm:drm_get_minor] *ERROR* DRM: Failed to initialize /proc/dri.
[    2.791917] kobject: 'controlD64' (ffff880006daf020): kobject_release, parent           (null) (delayed)
[    2.794702] cirrus: probe of 0000:00:02.0 failed with error -1
[    2.800244] usbcore: registered new interface driver udl
[    2.802802] parport_pc 00:04: reported by Plug and Play ACPI
[    2.806445] parport0: PC-style at 0x378, irq 7 [PCSPP(,...)]
[    2.809299] kobject: 'parport_pc.956' (ffff880006daf020): kobject_release, parent           (null) (delayed)
[    2.815944] ------------[ cut here ]------------
[    2.818957] WARNING: CPU: 0 PID: 1 at /c/wfg/linux/lib/debugobjects.c:260 debug_print_object+0x7c/0x8d()
[    2.819887] ODEBUG: init active (active state 0) object type: timer_list hint:           (null)
[    2.819887] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.11.0-rc2-00010-gc817a67-dirty #6
[    2.819887]  0000000000000104 ffff88000010db78 ffffffff8184ea6e 0000000000000000
[    2.819887]  ffff88000010dbc8 ffff88000010dbb8 ffffffff8108f38d 0000000000000046
[    2.819887]  ffffffff81223681 ffffffff81c20277 ffff880006db17b8 ffffffff81c602d0
[    2.819887] Call Trace:
[    2.819887]  [<ffffffff8184ea6e>] dump_stack+0x4f/0x84
[    2.819887]  [<ffffffff8108f38d>] warn_slowpath_common+0x72/0x8c
[    2.819887]  [<ffffffff81223681>] ? debug_print_object+0x7c/0x8d
[    2.819887]  [<ffffffff8108f40b>] warn_slowpath_fmt+0x41/0x43
[    2.819887]  [<ffffffff81223681>] debug_print_object+0x7c/0x8d
[    2.819887]  [<ffffffff812239e0>] __debug_object_init+0x27c/0x2c6
[    2.819887]  [<ffffffff81223a1b>] ? __debug_object_init+0x2b7/0x2c6
[    2.819887]  [<ffffffff81223a3e>] debug_object_init+0x14/0x16
[    2.819887]  [<ffffffff810992e8>] init_timer_key+0x23/0x65
[    2.819887]  [<ffffffff8121352f>] kobject_release+0x90/0xba
[    2.819887]  [<ffffffff812137ac>] kobject_put+0x4d/0x51
[    2.819887]  [<ffffffff81482cfb>] put_device+0x12/0x14
[    2.819887]  [<ffffffff814873a2>] platform_device_put+0x12/0x14
[    2.819887]  [<ffffffff81487727>] platform_device_unregister+0x16/0x1a
[    2.819887]  [<ffffffff814810f9>] parport_pc_probe_port+0x7c4/0x7d9
[    2.819887]  [<ffffffff81e36c75>] parport_pc_init+0x2b0/0x317
[    2.819887]  [<ffffffff81e369c5>] ? parport_setup+0x147/0x147
[    2.819887]  [<ffffffff81e11e0c>] do_one_initcall+0x8e/0x132
[    2.819887]  [<ffffffff810a7000>] ? param_array_set+0x7f/0xf2
[    2.819887]  [<ffffffff810a7275>] ? parse_args+0x1ad/0x26c
[    2.819887]  [<ffffffff81e11fe2>] kernel_init_freeable+0x132/0x1bc
[    2.819887]  [<ffffffff81e116e3>] ? do_early_param+0x86/0x86
[    2.819887]  [<ffffffff818488bf>] ? rest_init+0xc3/0xc3
[    2.819887]  [<ffffffff818488c8>] kernel_init+0x9/0xcc
[    2.819887]  [<ffffffff81859e3c>] ret_from_fork+0x7c/0xb0
[    2.819887]  [<ffffffff818488bf>] ? rest_init+0xc3/0xc3
[    2.819887] ---[ end trace 2f14671be5565db5 ]---
[    2.894906] INFO: trying to register non-static key.
[    2.896172] the code is fine but needs lockdep annotation.
[    2.897687] turning off the locking correctness validator.
[    2.898870] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W    3.11.0-rc2-00010-gc817a67-dirty #6
[    2.898870]  0000000000000000 ffff88000010da28 ffffffff8184ea6e 0000000000000000
[    2.898870]  0000000000000000 ffff88000010daa8 ffffffff810c5e5a ffff88000010da88
[    2.898870]  ffffffff810907e4 0000000000007a9c 0000000000000046 ffff88000010da78
[    2.898870] Call Trace:
[    2.898870]  [<ffffffff8184ea6e>] dump_stack+0x4f/0x84
[    2.898870]  [<ffffffff810c5e5a>] register_lock_class+0x104/0x2d8
[    2.898870]  [<ffffffff810907e4>] ? console_unlock+0x35b/0x36a
[    2.898870]  [<ffffffff810c744b>] ? trace_hardirqs_off_caller+0x33/0xa0
[    2.898870]  [<ffffffff810c813b>] __lock_acquire+0xf6/0xe51
[    2.898870]  [<ffffffff81859677>] ? retint_restore_args+0x13/0x13
[    2.898870]  [<ffffffff810c73d2>] ? trace_hardirqs_on_caller+0x154/0x18b
[    2.898870]  [<ffffffff810c92bf>] lock_acquire+0x7e/0x99
[    2.898870]  [<ffffffff8109962b>] ? try_to_del_timer_sync+0x5f/0x5f
[    2.898870]  [<ffffffff81099674>] del_timer_sync+0x49/0xcb
[    2.898870]  [<ffffffff8109962b>] ? try_to_del_timer_sync+0x5f/0x5f
[    2.898870]  [<ffffffff810cde75>] ? arch_local_irq_restore+0x6/0xd
[    2.898870]  [<ffffffff8109973a>] timer_fixup_init+0x16/0x2f
[    2.898870]  [<ffffffff812234ba>] debug_object_fixup+0x15/0x1d
[    2.898870]  [<ffffffff812239ff>] __debug_object_init+0x29b/0x2c6
[    2.898870]  [<ffffffff81223a1b>] ? __debug_object_init+0x2b7/0x2c6
[    2.898870]  [<ffffffff81223a3e>] debug_object_init+0x14/0x16
[    2.898870]  [<ffffffff810992e8>] init_timer_key+0x23/0x65
[    2.898870]  [<ffffffff8121352f>] kobject_release+0x90/0xba
[    2.898870]  [<ffffffff812137ac>] kobject_put+0x4d/0x51
[    2.898870]  [<ffffffff81482cfb>] put_device+0x12/0x14
[    2.898870]  [<ffffffff814873a2>] platform_device_put+0x12/0x14
[    2.898870]  [<ffffffff81487727>] platform_device_unregister+0x16/0x1a
[    2.898870]  [<ffffffff814810f9>] parport_pc_probe_port+0x7c4/0x7d9
[    2.898870]  [<ffffffff81e36c75>] parport_pc_init+0x2b0/0x317
[    2.898870]  [<ffffffff81e369c5>] ? parport_setup+0x147/0x147
[    2.898870]  [<ffffffff81e11e0c>] do_one_initcall+0x8e/0x132
[    2.898870]  [<ffffffff810a7000>] ? param_array_set+0x7f/0xf2
[    2.898870]  [<ffffffff810a7275>] ? parse_args+0x1ad/0x26c
[    2.898870]  [<ffffffff81e11fe2>] kernel_init_freeable+0x132/0x1bc
[    2.898870]  [<ffffffff81e116e3>] ? do_early_param+0x86/0x86
[    2.898870]  [<ffffffff818488bf>] ? rest_init+0xc3/0xc3
[    2.898870]  [<ffffffff818488c8>] kernel_init+0x9/0xcc
[    2.898870]  [<ffffffff81859e3c>] ret_from_fork+0x7c/0xb0
[    2.898870]  [<ffffffff818488bf>] ? rest_init+0xc3/0xc3
[    3.416153] tsc: Refined TSC clocksource calibration: 2693.460 MHz
[    3.792076] BUG: unable to handle kernel NULL pointer dereference at           (null)
[    3.793846] IP: [<          (null)>]           (null)
[    3.794895] PGD 0
[    3.795349] Oops: 0010 [#1] PREEMPT SMP DEBUG_PAGEALLOC
[    3.796043] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W    3.11.0-rc2-00010-gc817a67-dirty #6
[    3.796043] task: ffff88000010a040 ti: ffff88000010c000 task.ti: ffff88000010c000
[    3.796043] RIP: 0010:[<0000000000000000>]  [<          (null)>]           (null)
[    3.796043] RSP: 0000:ffff88000dc03e40  EFLAGS: 00010286
[    3.796043] RAX: 0000000000000000 RBX: 0000000000000100 RCX: 0000000000000000
[    3.796043] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
[    3.796043] RBP: ffff88000dc03e98 R08: 0000000000000002 R09: 0000000000000000
[    3.796043] R10: ffff88000dc03e58 R11: ffffffff81f3f780 R12: ffff88000010dfd8
[    3.796043] R13: 0000000000000000 R14: 0000000000000000 R15: ffffffff81f407d8
[    3.796043] FS:  0000000000000000(0000) GS:ffff88000dc00000(0000) knlGS:0000000000000000
[    3.796043] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[    3.796043] CR2: 0000000000000000 CR3: 0000000001c47000 CR4: 00000000000006b0
[    3.796043] Stack:
[    3.796043]  ffffffff810989e6 ffffffff8109897b ffffffff81f3f780 ffff880006daf0d8
[    3.796043]  0000000000000000 0000000000000000 0000000000000000 ffffffff81f3f780
[    3.796043]  ffff88000dc03ec8 ffffffff81f40fd8 ffffffff81f40bd8 ffff88000dc03f08
[    3.796043] Call Trace:
[    3.796043]  <IRQ>
[    3.796043]  [<ffffffff810989e6>] ? call_timer_fn+0x6b/0xde
[    3.796043]  [<ffffffff8109897b>] ? detach_timer+0x46/0x46
[    3.796043]  [<ffffffff81098fcb>] run_timer_softirq+0x187/0x1cf
[    3.796043]  [<ffffffff8109555f>] __do_softirq+0xc6/0x18f
[    3.796043]  [<ffffffff81095745>] irq_exit+0x58/0x9e
[    3.796043]  [<ffffffff81044e69>] smp_apic_timer_interrupt+0x31/0x3e
[    3.796043]  [<ffffffff8185ab72>] apic_timer_interrupt+0x72/0x80
[    3.796043]  <EOI>
[    3.796043]  [<ffffffff81859677>] ? retint_restore_args+0x13/0x13
[    3.796043]  [<ffffffff810990a2>] ? lock_timer_base.isra.17+0x49/0x4b
[    3.796043]  [<ffffffff810995f3>] try_to_del_timer_sync+0x27/0x5f
[    3.796043]  [<ffffffff81098801>] ? arch_local_irq_restore+0x6/0xd
[    3.796043]  [<ffffffff810996e3>] del_timer_sync+0xb8/0xcb
[    3.796043]  [<ffffffff8109962b>] ? try_to_del_timer_sync+0x5f/0x5f
[    3.796043]  [<ffffffff810cde75>] ? arch_local_irq_restore+0x6/0xd
[    3.796043]  [<ffffffff8109973a>] timer_fixup_init+0x16/0x2f
[    3.796043]  [<ffffffff812234ba>] debug_object_fixup+0x15/0x1d
[    3.796043]  [<ffffffff812239ff>] __debug_object_init+0x29b/0x2c6
[    3.796043]  [<ffffffff81223a1b>] ? __debug_object_init+0x2b7/0x2c6
[    3.796043]  [<ffffffff81223a3e>] debug_object_init+0x14/0x16
[    3.796043]  [<ffffffff810992e8>] init_timer_key+0x23/0x65
[    3.796043]  [<ffffffff8121352f>] kobject_release+0x90/0xba
[    3.796043]  [<ffffffff812137ac>] kobject_put+0x4d/0x51
[    3.796043]  [<ffffffff81482cfb>] put_device+0x12/0x14
[    3.796043]  [<ffffffff814873a2>] platform_device_put+0x12/0x14
[    3.796043]  [<ffffffff81487727>] platform_device_unregister+0x16/0x1a
[    3.796043]  [<ffffffff814810f9>] parport_pc_probe_port+0x7c4/0x7d9
[    3.796043]  [<ffffffff81e36c75>] parport_pc_init+0x2b0/0x317
[    3.796043]  [<ffffffff81e369c5>] ? parport_setup+0x147/0x147
[    3.796043]  [<ffffffff81e11e0c>] do_one_initcall+0x8e/0x132
[    3.796043]  [<ffffffff810a7000>] ? param_array_set+0x7f/0xf2
[    3.796043]  [<ffffffff810a7275>] ? parse_args+0x1ad/0x26c
[    3.796043]  [<ffffffff81e11fe2>] kernel_init_freeable+0x132/0x1bc
[    3.796043]  [<ffffffff81e116e3>] ? do_early_param+0x86/0x86
[    3.796043]  [<ffffffff818488bf>] ? rest_init+0xc3/0xc3
[    3.796043]  [<ffffffff818488c8>] kernel_init+0x9/0xcc
[    3.796043]  [<ffffffff81859e3c>] ret_from_fork+0x7c/0xb0
[    3.796043]  [<ffffffff818488bf>] ? rest_init+0xc3/0xc3
[    3.796043] Code:  Bad RIP value.
[    3.796043] RIP  [<          (null)>]           (null)
[    3.796043]  RSP <ffff88000dc03e40>
[    3.796043] CR2: 0000000000000000
[    3.877786] ---[ end trace 2f14671be5565db6 ]---
[    3.878755] Kernel panic - not syncing: Fatal exception in interrupt
[    3.880631] Rebooting in 10 seconds..%                                                                                                  wfg@bee ~/linux/obj-c
#67 lore raw
In reply to Fengguang Wu
Quoted 4 lines · Fengguang Wu

Thanks for the hints! I run a kernel with pr_alert() for several times and here is the screen log. Note that this kernel is compiled with gcc 4.6.3 and the decoded code looks different than gcc 4.8.1

Ok, I think we have something.

Quoted 51 lines

NULL pointer dereference at 0000000000000008

[    3.901119] IP: [<ffffffff81098f60>] run_timer_softirq+0x126/0x1da
[    3.901119] PGD 0
[    3.901119] Oops: 0002 [#1] PREEMPT SMP DEBUG_PAGEALLOC
[    3.901119] CPU: 1 PID: 22 Comm: kworker/1:1 Not tainted 3.11.0-rc2-00010-gc817a67-dirty #5
[    3.901119] Workqueue: events power_supply_changed_work
[    3.901119] task: ffff8800002dc5c0 ti: ffff8800002de000 task.ti: ffff8800002de000
[    3.901119] RIP: 0010:[<ffffffff81098f60>]  [<ffffffff81098f60>] run_timer_softirq+0x126/0x1da
[    3.901119] RSP: 0000:ffff88000dd03ea8  EFLAGS: 00010002
[    3.901119] RAX: ffff880006dc28a0 RBX: ffff88000015c000 RCX: ffff88000dd03ec8
[    3.901119] RDX: ffff880006dc2860 RSI: ffffffff810a1b7b RDI: 0000000000000000
[    3.901119] RBP: ffff88000dd03f08 R08: 0000000000000002 R09: dead000000200200
[    3.901119] R10: ffff88000015c018 R11: ffff8800002dc5c0 R12: ffff88000dd03ec8
[    3.901119] R13: ffff88000015d858 R14: ffff88000015d458 R15: ffff88000015d058
[    3.901119] FS:  0000000000000000(0000) GS:ffff88000dd00000(0000) knlGS:0000000000000000
[    3.901119] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[    3.901119] CR2: 0000000000000008 CR3: 0000000001c47000 CR4: 00000000000006a0
[    3.901119] Stack:
[    3.901119]  ffff88000dd0e1b0 ffff88000dd0e170 ffffffff810a1b7b 000000c000000000
[    3.901119]  ffff880006dc28a0 ffff88000dd0e300 ffff88000dd03ef8 ffff8800002dffd8
[    3.901119]  ffffffff81c43088 0000000010000100 0000000000000141 0000000000000001
[    3.901119] Call Trace:
[    3.901119]  <IRQ>
[    3.901119]  [<ffffffff810a1b7b>] ? __queue_work+0x1ee/0x1ee
[    3.901119]  [<ffffffff8109555f>] __do_softirq+0xc6/0x18f
[    3.901119]  [<ffffffff81095745>] irq_exit+0x58/0x9e
[    3.901119]  [<ffffffff81044e69>] smp_apic_timer_interrupt+0x31/0x3e
[    3.901119]  [<ffffffff8185a772>] apic_timer_interrupt+0x72/0x80
[    3.901119]  <EOI>
[    3.901119]  [<ffffffff81859277>] ? retint_restore_args+0x13/0x13
[    3.901119]  [<ffffffff810af994>] ? arch_local_irq_enable+0xb/0xd
[    3.901119]  [<ffffffff810c707f>] ? trace_hardirqs_on+0xd/0xf
[    3.901119]  [<ffffffff81857904>] preempt_schedule_irq+0x36/0x5a
[    3.901119]  [<ffffffff818593a6>] retint_kernel+0x26/0x30
[    3.901119]  [<ffffffff8108f47c>] ? arch_local_irq_restore+0x6/0xd
[    3.901119]  [<ffffffff81090db8>] vprintk_emit+0x3f9/0x422
[    3.901119]  [<ffffffff8121a640>] ? snprintf+0x34/0x36
[    3.901119]  [<ffffffff81483ca2>] dev_vprintk_emit+0x1a3/0x1c9
[    3.901119]  [<ffffffff81219385>] ? string.isra.3+0x3d/0xa2
[    3.901119]  [<ffffffff81483cfc>] dev_printk_emit+0x34/0x36
[    3.901119]  [<ffffffff81483d6f>] __dev_printk+0x71/0x78
[    3.901119]  [<ffffffff81483db6>] dev_printk+0x40/0x42
[    3.901119]  [<ffffffff8111b1b4>] ? __kmalloc+0x93/0xb8
[    3.901119]  [<ffffffff815dd5a4>] power_supply_uevent+0x183/0x1ec
[    3.901119]  [<ffffffff81483451>] dev_uevent+0x179/0x1a2
[    3.901119]  [<ffffffff812130dc>] ? kzalloc+0xf/0x11
[    3.901119]  [<ffffffff812142ce>] kobject_uevent_env+0x195/0x414
[    3.901119]  [<ffffffff81214558>] kobject_uevent+0xb/0xd
[    3.901119]  [<ffffffff815dcc14>] power_supply_changed_work+0x60/0x65
[    3.901119]  [<ffffffff810a2733>] process_one_work+0x1de/0x2fd
[    3.901119]  [<ffffffff810a26c9>] ? process_one_work+0x174/0x2fd
Quoted 8 lines
[    3.901119]  [<ffffffff810a2c54>] worker_thread+0x159/0x1ee
[    3.901119]  [<ffffffff810a2afb>] ? rescuer_thread+0x27f/0x27f
[    3.901119]  [<ffffffff810a859a>] kthread+0xac/0xb4
[    3.901119]  [<ffffffff810a84ee>] ? __kthread_parkme+0x68/0x68
[    3.901119]  [<ffffffff81859a3c>] ret_from_fork+0x7c/0xb0
[    3.901119]  [<ffffffff810a84ee>] ? __kthread_parkme+0x68/0x68
[    3.901119] Code: 08 e9 99 00 00 00 4c 8b 40 18 48 8b 70 20 49 b9 00 02 20 00 00 00 ad de 48 8b 50 28 48 89 43 38 48 8b 38 48 8b 48 08 41 83 e0 02 <48> 89 4f 08 48 89 39 f6 40 18 01 48 c7 00 00 00 00 00 4c 89 48
[    3.901119] RIP  [<ffffffff81098f60>] run_timer_softirq+0x126/0x1da

So this is the same bug, now the code decodes to

   5: 4c 8b 40 18           mov    0x18(%rax),%r8
   9: 48 8b 70 20           mov    0x20(%rax),%rsi
   d: 49 b9 00 02 20 00 00 movabs $0xdead000000200200,%r9
  14: 00 ad de
  17: 48 8b 50 28           mov    0x28(%rax),%rdx
  1b: 48 89 43 38           mov    %rax,0x38(%rbx)
  1f: 48 8b 38             mov    (%rax),%rdi
  22: 48 8b 48 08           mov    0x8(%rax),%rcx
  26: 41 83 e0 02           and    $0x2,%r8d

2a:* 48 89 4f 08 mov %rcx,0x8(%rdi) <-- trapping instruction
2e: 48 89 39 mov %rdi,(%rcx)
31: f6 40 18 01 testb $0x1,0x18(%rax)
35: 48 c7 00 00 00 00 00 movq $0x0,(%rax)

so the NULL pointer in %rdi (which _should_ be a list pointer) got loaded from %rax. So the prime suspect is an allocation near

RAX: ffff880006dc28a0.

and looking backwards in your dump, we have

[    2.807742] kobject: 'parport_pc.888' (ffff880006dc2020):
kobject_release, parent           (null) (delayed)
[    2.810494] kobject: 'parport_pc.632' (ffff880006dca820):

kobject_release, parent (null) (delayed)

so it looks like that "parparport_pc.632" thing.

Another one, same code:

Quoted 9 lines
[    3.992074] BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
[    3.994126] IP: [<ffffffff81098f60>] run_timer_softirq+0x126/0x1da
[    3.995677] PGD 0
[    3.996037] Oops: 0002 [#1] PREEMPT SMP DEBUG_PAGEALLOC
[    3.996037] CPU: 1 PID: 1 Comm: init Not tainted 3.11.0-rc2-00010-gc817a67-dirty #5
[    3.996037] task: ffff88000010a040 ti: ffff88000010c000 task.ti: ffff88000010c000
[    3.996037] RIP: 0010:[<ffffffff81098f60>]  [<ffffffff81098f60>] run_timer_softirq+0x126/0x1da
[    3.996037] RSP: 0000:ffff88000dd03ea8  EFLAGS: 00010002
[    3.996037] RAX: ffff880006da20a0 RBX: ffff88000015c000 RCX: ffff88000dd03ec8

and for that boot we had

[    2.990338] kobject: 'parport_pc.956' (ffff880006da2020):
kobject_release, parent           (null) (delayed)
[    2.992654] kobject: 'parport_pc.888' (ffff880006db5820):
kobject_release, parent           (null) (delayed)
[    2.994905] kobject: 'parport_pc.632' (ffff880006db5020):

kobject_release, parent (null) (delayed)

so now it's 'parport_pc.956'.

Anyway, that does look like a strong pattern.

Does the problem go away if you disable the parport_pc driver?

Linus

#68 lore raw
In reply to Fengguang Wu
Quoted 4 lines · Fengguang Wu

Thanks for the hints! I run a kernel with pr_alert() for several times and here is the screen log. Note that this kernel is compiled with gcc 4.6.3 and the decoded code looks different than gcc 4.8.1

Ok, I think we have something.

Quoted 51 lines

NULL pointer dereference at 0000000000000008

[    3.901119] IP: [<ffffffff81098f60>] run_timer_softirq+0x126/0x1da
[    3.901119] PGD 0
[    3.901119] Oops: 0002 [#1] PREEMPT SMP DEBUG_PAGEALLOC
[    3.901119] CPU: 1 PID: 22 Comm: kworker/1:1 Not tainted 3.11.0-rc2-00010-gc817a67-dirty #5
[    3.901119] Workqueue: events power_supply_changed_work
[    3.901119] task: ffff8800002dc5c0 ti: ffff8800002de000 task.ti: ffff8800002de000
[    3.901119] RIP: 0010:[<ffffffff81098f60>]  [<ffffffff81098f60>] run_timer_softirq+0x126/0x1da
[    3.901119] RSP: 0000:ffff88000dd03ea8  EFLAGS: 00010002
[    3.901119] RAX: ffff880006dc28a0 RBX: ffff88000015c000 RCX: ffff88000dd03ec8
[    3.901119] RDX: ffff880006dc2860 RSI: ffffffff810a1b7b RDI: 0000000000000000
[    3.901119] RBP: ffff88000dd03f08 R08: 0000000000000002 R09: dead000000200200
[    3.901119] R10: ffff88000015c018 R11: ffff8800002dc5c0 R12: ffff88000dd03ec8
[    3.901119] R13: ffff88000015d858 R14: ffff88000015d458 R15: ffff88000015d058
[    3.901119] FS:  0000000000000000(0000) GS:ffff88000dd00000(0000) knlGS:0000000000000000
[    3.901119] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[    3.901119] CR2: 0000000000000008 CR3: 0000000001c47000 CR4: 00000000000006a0
[    3.901119] Stack:
[    3.901119]  ffff88000dd0e1b0 ffff88000dd0e170 ffffffff810a1b7b 000000c000000000
[    3.901119]  ffff880006dc28a0 ffff88000dd0e300 ffff88000dd03ef8 ffff8800002dffd8
[    3.901119]  ffffffff81c43088 0000000010000100 0000000000000141 0000000000000001
[    3.901119] Call Trace:
[    3.901119]  <IRQ>
[    3.901119]  [<ffffffff810a1b7b>] ? __queue_work+0x1ee/0x1ee
[    3.901119]  [<ffffffff8109555f>] __do_softirq+0xc6/0x18f
[    3.901119]  [<ffffffff81095745>] irq_exit+0x58/0x9e
[    3.901119]  [<ffffffff81044e69>] smp_apic_timer_interrupt+0x31/0x3e
[    3.901119]  [<ffffffff8185a772>] apic_timer_interrupt+0x72/0x80
[    3.901119]  <EOI>
[    3.901119]  [<ffffffff81859277>] ? retint_restore_args+0x13/0x13
[    3.901119]  [<ffffffff810af994>] ? arch_local_irq_enable+0xb/0xd
[    3.901119]  [<ffffffff810c707f>] ? trace_hardirqs_on+0xd/0xf
[    3.901119]  [<ffffffff81857904>] preempt_schedule_irq+0x36/0x5a
[    3.901119]  [<ffffffff818593a6>] retint_kernel+0x26/0x30
[    3.901119]  [<ffffffff8108f47c>] ? arch_local_irq_restore+0x6/0xd
[    3.901119]  [<ffffffff81090db8>] vprintk_emit+0x3f9/0x422
[    3.901119]  [<ffffffff8121a640>] ? snprintf+0x34/0x36
[    3.901119]  [<ffffffff81483ca2>] dev_vprintk_emit+0x1a3/0x1c9
[    3.901119]  [<ffffffff81219385>] ? string.isra.3+0x3d/0xa2
[    3.901119]  [<ffffffff81483cfc>] dev_printk_emit+0x34/0x36
[    3.901119]  [<ffffffff81483d6f>] __dev_printk+0x71/0x78
[    3.901119]  [<ffffffff81483db6>] dev_printk+0x40/0x42
[    3.901119]  [<ffffffff8111b1b4>] ? __kmalloc+0x93/0xb8
[    3.901119]  [<ffffffff815dd5a4>] power_supply_uevent+0x183/0x1ec
[    3.901119]  [<ffffffff81483451>] dev_uevent+0x179/0x1a2
[    3.901119]  [<ffffffff812130dc>] ? kzalloc+0xf/0x11
[    3.901119]  [<ffffffff812142ce>] kobject_uevent_env+0x195/0x414
[    3.901119]  [<ffffffff81214558>] kobject_uevent+0xb/0xd
[    3.901119]  [<ffffffff815dcc14>] power_supply_changed_work+0x60/0x65
[    3.901119]  [<ffffffff810a2733>] process_one_work+0x1de/0x2fd
[    3.901119]  [<ffffffff810a26c9>] ? process_one_work+0x174/0x2fd
Quoted 8 lines
[    3.901119]  [<ffffffff810a2c54>] worker_thread+0x159/0x1ee
[    3.901119]  [<ffffffff810a2afb>] ? rescuer_thread+0x27f/0x27f
[    3.901119]  [<ffffffff810a859a>] kthread+0xac/0xb4
[    3.901119]  [<ffffffff810a84ee>] ? __kthread_parkme+0x68/0x68
[    3.901119]  [<ffffffff81859a3c>] ret_from_fork+0x7c/0xb0
[    3.901119]  [<ffffffff810a84ee>] ? __kthread_parkme+0x68/0x68
[    3.901119] Code: 08 e9 99 00 00 00 4c 8b 40 18 48 8b 70 20 49 b9 00 02 20 00 00 00 ad de 48 8b 50 28 48 89 43 38 48 8b 38 48 8b 48 08 41 83 e0 02 <48> 89 4f 08 48 89 39 f6 40 18 01 48 c7 00 00 00 00 00 4c 89 48
[    3.901119] RIP  [<ffffffff81098f60>] run_timer_softirq+0x126/0x1da

So this is the same bug, now the code decodes to

   5: 4c 8b 40 18           mov    0x18(%rax),%r8
   9: 48 8b 70 20           mov    0x20(%rax),%rsi
   d: 49 b9 00 02 20 00 00 movabs $0xdead000000200200,%r9
  14: 00 ad de
  17: 48 8b 50 28           mov    0x28(%rax),%rdx
  1b: 48 89 43 38           mov    %rax,0x38(%rbx)
  1f: 48 8b 38             mov    (%rax),%rdi
  22: 48 8b 48 08           mov    0x8(%rax),%rcx
  26: 41 83 e0 02           and    $0x2,%r8d

2a:* 48 89 4f 08 mov %rcx,0x8(%rdi) <-- trapping instruction
2e: 48 89 39 mov %rdi,(%rcx)
31: f6 40 18 01 testb $0x1,0x18(%rax)
35: 48 c7 00 00 00 00 00 movq $0x0,(%rax)

so the NULL pointer in %rdi (which _should_ be a list pointer) got loaded from %rax. So the prime suspect is an allocation near

RAX: ffff880006dc28a0.

and looking backwards in your dump, we have

[    2.807742] kobject: 'parport_pc.888' (ffff880006dc2020):
kobject_release, parent           (null) (delayed)
[    2.810494] kobject: 'parport_pc.632' (ffff880006dca820):

kobject_release, parent (null) (delayed)

so it looks like that "parparport_pc.632" thing.

Another one, same code:

Quoted 9 lines
[    3.992074] BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
[    3.994126] IP: [<ffffffff81098f60>] run_timer_softirq+0x126/0x1da
[    3.995677] PGD 0
[    3.996037] Oops: 0002 [#1] PREEMPT SMP DEBUG_PAGEALLOC
[    3.996037] CPU: 1 PID: 1 Comm: init Not tainted 3.11.0-rc2-00010-gc817a67-dirty #5
[    3.996037] task: ffff88000010a040 ti: ffff88000010c000 task.ti: ffff88000010c000
[    3.996037] RIP: 0010:[<ffffffff81098f60>]  [<ffffffff81098f60>] run_timer_softirq+0x126/0x1da
[    3.996037] RSP: 0000:ffff88000dd03ea8  EFLAGS: 00010002
[    3.996037] RAX: ffff880006da20a0 RBX: ffff88000015c000 RCX: ffff88000dd03ec8

and for that boot we had

[    2.990338] kobject: 'parport_pc.956' (ffff880006da2020):
kobject_release, parent           (null) (delayed)
[    2.992654] kobject: 'parport_pc.888' (ffff880006db5820):
kobject_release, parent           (null) (delayed)
[    2.994905] kobject: 'parport_pc.632' (ffff880006db5020):

kobject_release, parent (null) (delayed)

so now it's 'parport_pc.956'.

Anyway, that does look like a strong pattern.

Does the problem go away if you disable the parport_pc driver?

Linus

#69 lore raw
In reply to Linus Torvalds
Quoted 25 lines · Linus Torvalds
Quoted 4 lines · Fengguang Wu

On Mon, Oct 07, 2013 at 01:12:17AM -0700, Linus Torvalds wrote:

My pleasure! Here are 100 randomly selected call traces. Also attached several full dmesgs and the kconfig.

Ok, they may be randomly selected, but they are all the same. Which is good, I guess, we're only talking about one bug.

Anyway, they all have RIP:run_timer_softirq+0x12c/0x1b8, and the code is

   0: 8b 65 c8             mov    -0x38(%rbp),%esp
   3: 4d 39 ec             cmp    %r13,%r12
   6: 0f 84 2f ff ff ff     je     0xffffffffffffff3b
   c: 41 8b 4c 24 18       mov    0x18(%r12),%ecx
  11: 4d 8b 74 24 20       mov    0x20(%r12),%r14
  16: 4d 8b 7c 24 28       mov    0x28(%r12),%r15

1b: 4c 89 63 38 mov %r12,0x38(%rbx)
1f: 49 8b 44 24 08 mov 0x8(%r12),%rax
24: 49 8b 14 24 mov (%r12),%rdx
28: 83 e1 02 and $0x2,%ecx
2b:* 48 89 42 08 mov %rax,0x8(%rdx) <-- trapping instruction
2f: 48 89 10 mov %rdx,(%rax)
32: 48 b8 00 02 20 00 00 movabs $0xdead000000200200,%rax

Quoted 7 lines

where that constant is LIST_POISON2 and the "and $2" seems to be TIMER_IRQSAFE. So the trapping instruction *looks* like it's doing __list_del() on the timer, and timer->next is NULL.

So somebody added a timer, and then deallocated/cleared the structure before it triggered. The problem is, I can't see a way to figure out _who_ did that.

I think CONFIG_DEBUG_OBJECTS_TIMERS=y should be able to detect that?

Debugobjects hooks into deallocation paths and complains immediately if a live timer is zapped that way.

If the corrupion does not involve deallocation then it might be more difficult to detect but not impossible either: for example if an object is not freed but reused incorrectly then a repeat use of any timer function will cause the debugobjects (and/or the timer code) to complain.

So I'd suggest trying debugobjects, it should catch a fair number of non-exotic object corruption patterns.

Thanks,

Ingo

#70 lore raw
In reply to Linus Torvalds
Quoted 25 lines · Linus Torvalds
Quoted 4 lines · Fengguang Wu

On Mon, Oct 07, 2013 at 01:12:17AM -0700, Linus Torvalds wrote:

My pleasure! Here are 100 randomly selected call traces. Also attached several full dmesgs and the kconfig.

Ok, they may be randomly selected, but they are all the same. Which is good, I guess, we're only talking about one bug.

Anyway, they all have RIP:run_timer_softirq+0x12c/0x1b8, and the code is

   0: 8b 65 c8             mov    -0x38(%rbp),%esp
   3: 4d 39 ec             cmp    %r13,%r12
   6: 0f 84 2f ff ff ff     je     0xffffffffffffff3b
   c: 41 8b 4c 24 18       mov    0x18(%r12),%ecx
  11: 4d 8b 74 24 20       mov    0x20(%r12),%r14
  16: 4d 8b 7c 24 28       mov    0x28(%r12),%r15

1b: 4c 89 63 38 mov %r12,0x38(%rbx)
1f: 49 8b 44 24 08 mov 0x8(%r12),%rax
24: 49 8b 14 24 mov (%r12),%rdx
28: 83 e1 02 and $0x2,%ecx
2b:* 48 89 42 08 mov %rax,0x8(%rdx) <-- trapping instruction
2f: 48 89 10 mov %rdx,(%rax)
32: 48 b8 00 02 20 00 00 movabs $0xdead000000200200,%rax

Quoted 7 lines

where that constant is LIST_POISON2 and the "and $2" seems to be TIMER_IRQSAFE. So the trapping instruction *looks* like it's doing __list_del() on the timer, and timer->next is NULL.

So somebody added a timer, and then deallocated/cleared the structure before it triggered. The problem is, I can't see a way to figure out _who_ did that.

I think CONFIG_DEBUG_OBJECTS_TIMERS=y should be able to detect that?

Debugobjects hooks into deallocation paths and complains immediately if a live timer is zapped that way.

If the corrupion does not involve deallocation then it might be more difficult to detect but not impossible either: for example if an object is not freed but reused incorrectly then a repeat use of any timer function will cause the debugobjects (and/or the timer code) to complain.

So I'd suggest trying debugobjects, it should catch a fair number of non-exotic object corruption patterns.

Thanks,

Ingo

#71 lore raw
Quoted 32 lines · Ingo Molnar
Quoted 29 lines · Linus Torvalds
Quoted 4 lines · Fengguang Wu

On Mon, Oct 07, 2013 at 01:12:17AM -0700, Linus Torvalds wrote:

My pleasure! Here are 100 randomly selected call traces. Also attached several full dmesgs and the kconfig.

Ok, they may be randomly selected, but they are all the same. Which is good, I guess, we're only talking about one bug.

Anyway, they all have RIP:run_timer_softirq+0x12c/0x1b8, and the code is

   0: 8b 65 c8             mov    -0x38(%rbp),%esp
   3: 4d 39 ec             cmp    %r13,%r12
   6: 0f 84 2f ff ff ff     je     0xffffffffffffff3b
   c: 41 8b 4c 24 18       mov    0x18(%r12),%ecx
  11: 4d 8b 74 24 20       mov    0x20(%r12),%r14
  16: 4d 8b 7c 24 28       mov    0x28(%r12),%r15

1b: 4c 89 63 38 mov %r12,0x38(%rbx)
1f: 49 8b 44 24 08 mov 0x8(%r12),%rax
24: 49 8b 14 24 mov (%r12),%rdx
28: 83 e1 02 and $0x2,%ecx
2b:* 48 89 42 08 mov %rax,0x8(%rdx) <-- trapping instruction
2f: 48 89 10 mov %rdx,(%rax)
32: 48 b8 00 02 20 00 00 movabs $0xdead000000200200,%rax

where that constant is LIST_POISON2 and the "and $2" seems to be TIMER_IRQSAFE. So the trapping instruction *looks* like it's doing __list_del() on the timer, and timer->next is NULL.

Quoted 5 lines
Quoted 3 lines

So somebody added a timer, and then deallocated/cleared the structure before it triggered. The problem is, I can't see a way to figure out _who_ did that.

I think CONFIG_DEBUG_OBJECTS_TIMERS=y should be able to detect that?

It did help expose more information, and earlier.

w/o debugobjects, we hit the "BUG: ..." directly:

[    2.964097] BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
[    2.966666] IP: [<ffffffff81098f60>] run_timer_softirq+0x126/0x1da
[    2.968060] PGD 0
[    2.968060] Oops: 0002 [#1] PREEMPT SMP DEBUG_PAGEALLOC
[    2.968060] CPU: 0 PID: 95 Comm: kworker/0:2 Not tainted 3.11.0-rc2-00010-gc817a67-dirty #5
[    2.968060] Workqueue: events flush_to_ldisc
[    2.968060] task: ffff8800068544c0 ti: ffff880006856000 task.ti: ffff880006856000
[    2.968060] RIP: 0010:[<ffffffff81098f60>]  [<ffffffff81098f60>] run_timer_softirq+0x126/0x1da

After enabling CONFIG_DEBUG_OBJECTS_TIMERS=y, it will issue a WARNING followed by a "BUG: ..."

[    2.802167] parport_pc 00:04: reported by Plug and Play ACPI
[    2.803818] parport0: PC-style at 0x378, irq 7 [PCSPP(,...)]
[    2.806035] kobject: 'parport_pc.956' (ffff880006dc3820): kobject_release, parent           (null) (delayed)
[    2.808626] ------------[ cut here ]------------                                                            
[    2.809776] WARNING: CPU: 1 PID: 1 at /c/wfg/linux/lib/debugobjects.c:260 debug_print_object+0x7c/0x8d()
[    2.812433] ODEBUG: init active (active state 0) object type: timer_list hint:           (null)         
......
[    3.796079] BUG: unable to handle kernel NULL pointer dereference at           (null)
Quoted 10 lines

Debugobjects hooks into deallocation paths and complains immediately if a live timer is zapped that way.

If the corrupion does not involve deallocation then it might be more difficult to detect but not impossible either: for example if an object is not freed but reused incorrectly then a repeat use of any timer function will cause the debugobjects (and/or the timer code) to complain.

So I'd suggest trying debugobjects, it should catch a fair number of non-exotic object corruption patterns.

Good to know that, thanks for the info!

Regards,
Fengguang

#72 lore raw
Quoted 1 line · Fengguang Wu

After enabling CONFIG_DEBUG_OBJECTS_TIMERS=y, it will issue a WARNING followed by a "BUG: ..."

Cool!

Quoted 8 lines
[    2.802167] parport_pc 00:04: reported by Plug and Play ACPI
[    2.803818] parport0: PC-style at 0x378, irq 7 [PCSPP(,...)]
[    2.806035] kobject: 'parport_pc.956' (ffff880006dc3820): kobject_release, parent           (null) (delayed)
[    2.808626] ------------[ cut here ]------------                                                            
[    2.809776] WARNING: CPU: 1 PID: 1 at /c/wfg/linux/lib/debugobjects.c:260 debug_print_object+0x7c/0x8d()
[    2.812433] ODEBUG: init active (active state 0) object type: timer_list hint:           (null)         
......
[    3.796079] BUG: unable to handle kernel NULL pointer dereference at           (null)

Mind posting the full backtrace? It should show the actual callsite that zaps the timer. I don't think we got that dump so far, I've only seen timer list corruption backtraces. (but I haven't read the whole thread.)

Thanks,

Ingo

#73 lore raw
In reply to Fengguang Wu
Quoted 1 line · Fengguang Wu

After enabling CONFIG_DEBUG_OBJECTS_TIMERS=y, it will issue a WARNING followed by a "BUG: ..."

Cool!

Quoted 8 lines
[    2.802167] parport_pc 00:04: reported by Plug and Play ACPI
[    2.803818] parport0: PC-style at 0x378, irq 7 [PCSPP(,...)]
[    2.806035] kobject: 'parport_pc.956' (ffff880006dc3820): kobject_release, parent           (null) (delayed)
[    2.808626] ------------[ cut here ]------------                                                            
[    2.809776] WARNING: CPU: 1 PID: 1 at /c/wfg/linux/lib/debugobjects.c:260 debug_print_object+0x7c/0x8d()
[    2.812433] ODEBUG: init active (active state 0) object type: timer_list hint:           (null)         
......
[    3.796079] BUG: unable to handle kernel NULL pointer dereference at           (null)

Mind posting the full backtrace? It should show the actual callsite that zaps the timer. I don't think we got that dump so far, I've only seen timer list corruption backtraces. (but I haven't read the whole thread.)

Thanks,

Ingo

#74 lore raw
Quoted 15 lines · Ingo Molnar
Quoted 1 line · Fengguang Wu

After enabling CONFIG_DEBUG_OBJECTS_TIMERS=y, it will issue a WARNING followed by a "BUG: ..."

Cool!

Quoted 8 lines
[    2.802167] parport_pc 00:04: reported by Plug and Play ACPI
[    2.803818] parport0: PC-style at 0x378, irq 7 [PCSPP(,...)]
[    2.806035] kobject: 'parport_pc.956' (ffff880006dc3820): kobject_release, parent           (null) (delayed)
[    2.808626] ------------[ cut here ]------------                                                            
[    2.809776] WARNING: CPU: 1 PID: 1 at /c/wfg/linux/lib/debugobjects.c:260 debug_print_object+0x7c/0x8d()
[    2.812433] ODEBUG: init active (active state 0) object type: timer_list hint:           (null)         
......
[    3.796079] BUG: unable to handle kernel NULL pointer dereference at           (null)
Quoted 3 lines

Mind posting the full backtrace? It should show the actual callsite that zaps the timer. I don't think we got that dump so far, I've only seen timer list corruption backtraces. (but I haven't read the whole thread.)

I see you already posted the dmesg in another part of this thread, so the relevant call-trace for parport_pc.c is:

Quoted 20 lines
[    2.812579] Call Trace:
[    2.812579]  [<ffffffff8184ea6e>] dump_stack+0x4f/0x84
[    2.812579]  [<ffffffff8108f38d>] warn_slowpath_common+0x72/0x8c
[    2.812579]  [<ffffffff81223681>] ? debug_print_object+0x7c/0x8d
[    2.812579]  [<ffffffff8108f40b>] warn_slowpath_fmt+0x41/0x43
[    2.812579]  [<ffffffff81223681>] debug_print_object+0x7c/0x8d
[    2.812579]  [<ffffffff812239e0>] __debug_object_init+0x27c/0x2c6
[    2.812579]  [<ffffffff81223a1b>] ? __debug_object_init+0x2b7/0x2c6
[    2.812579]  [<ffffffff81223a3e>] debug_object_init+0x14/0x16
[    2.812579]  [<ffffffff810992e8>] init_timer_key+0x23/0x65
[    2.812579]  [<ffffffff8121352f>] kobject_release+0x90/0xba
[    2.812579]  [<ffffffff812137ac>] kobject_put+0x4d/0x51
[    2.812579]  [<ffffffff81482cfb>] put_device+0x12/0x14
[    2.812579]  [<ffffffff814873a2>] platform_device_put+0x12/0x14
[    2.812579]  [<ffffffff81487727>] platform_device_unregister+0x16/0x1a
[    2.812579]  [<ffffffff814810f9>] parport_pc_probe_port+0x7c4/0x7d9
[    2.812579]  [<ffffffff81e36c75>] parport_pc_init+0x2b0/0x317
[    2.812579]  [<ffffffff81e369c5>] ? parport_setup+0x147/0x147
[    2.812579]  [<ffffffff81e11e0c>] do_one_initcall+0x8e/0x132
[    2.812579]  [<ffffffff810a7000>] ? param_array_set+0x7f/0xf2
Quoted 8 lines
[    2.812579]  [<ffffffff810a7275>] ? parse_args+0x1ad/0x26c
[    2.812579]  [<ffffffff81e11fe2>] kernel_init_freeable+0x132/0x1bc
[    2.812579]  [<ffffffff81e116e3>] ? do_early_param+0x86/0x86
[    2.812579]  [<ffffffff818488bf>] ? rest_init+0xc3/0xc3
[    2.812579]  [<ffffffff818488c8>] kernel_init+0x9/0xcc
[    2.812579]  [<ffffffff81859e3c>] ret_from_fork+0x7c/0xb0
[    2.812579]  [<ffffffff818488bf>] ? rest_init+0xc3/0xc3
[    2.812579] ---[ end trace ce7dd707bef7dc3e ]---

It appears a delayed callback is already active for that platform device? Looks weird, because in theory platform devices are allocated anew in parport_pc_probe_port():

                pdev = platform_device_register_simple("parport_pc",
                                                       base, NULL, 0);
                if (IS_ERR(pdev))
                        return NULL;
                dev = &pdev->dev;

Which is allocated via zalloc(), so no reuse.

and then released if the hardware port is not present:

out1:

        if (pdev)
                platform_device_unregister(pdev);

Thanks,

Ingo

#75 lore raw
In reply to Ingo Molnar
Quoted 15 lines · Ingo Molnar
Quoted 1 line · Fengguang Wu

After enabling CONFIG_DEBUG_OBJECTS_TIMERS=y, it will issue a WARNING followed by a "BUG: ..."

Cool!

Quoted 8 lines
[    2.802167] parport_pc 00:04: reported by Plug and Play ACPI
[    2.803818] parport0: PC-style at 0x378, irq 7 [PCSPP(,...)]
[    2.806035] kobject: 'parport_pc.956' (ffff880006dc3820): kobject_release, parent           (null) (delayed)
[    2.808626] ------------[ cut here ]------------                                                            
[    2.809776] WARNING: CPU: 1 PID: 1 at /c/wfg/linux/lib/debugobjects.c:260 debug_print_object+0x7c/0x8d()
[    2.812433] ODEBUG: init active (active state 0) object type: timer_list hint:           (null)         
......
[    3.796079] BUG: unable to handle kernel NULL pointer dereference at           (null)
Quoted 3 lines

Mind posting the full backtrace? It should show the actual callsite that zaps the timer. I don't think we got that dump so far, I've only seen timer list corruption backtraces. (but I haven't read the whole thread.)

I see you already posted the dmesg in another part of this thread, so the relevant call-trace for parport_pc.c is:

Quoted 20 lines
[    2.812579] Call Trace:
[    2.812579]  [<ffffffff8184ea6e>] dump_stack+0x4f/0x84
[    2.812579]  [<ffffffff8108f38d>] warn_slowpath_common+0x72/0x8c
[    2.812579]  [<ffffffff81223681>] ? debug_print_object+0x7c/0x8d
[    2.812579]  [<ffffffff8108f40b>] warn_slowpath_fmt+0x41/0x43
[    2.812579]  [<ffffffff81223681>] debug_print_object+0x7c/0x8d
[    2.812579]  [<ffffffff812239e0>] __debug_object_init+0x27c/0x2c6
[    2.812579]  [<ffffffff81223a1b>] ? __debug_object_init+0x2b7/0x2c6
[    2.812579]  [<ffffffff81223a3e>] debug_object_init+0x14/0x16
[    2.812579]  [<ffffffff810992e8>] init_timer_key+0x23/0x65
[    2.812579]  [<ffffffff8121352f>] kobject_release+0x90/0xba
[    2.812579]  [<ffffffff812137ac>] kobject_put+0x4d/0x51
[    2.812579]  [<ffffffff81482cfb>] put_device+0x12/0x14
[    2.812579]  [<ffffffff814873a2>] platform_device_put+0x12/0x14
[    2.812579]  [<ffffffff81487727>] platform_device_unregister+0x16/0x1a
[    2.812579]  [<ffffffff814810f9>] parport_pc_probe_port+0x7c4/0x7d9
[    2.812579]  [<ffffffff81e36c75>] parport_pc_init+0x2b0/0x317
[    2.812579]  [<ffffffff81e369c5>] ? parport_setup+0x147/0x147
[    2.812579]  [<ffffffff81e11e0c>] do_one_initcall+0x8e/0x132
[    2.812579]  [<ffffffff810a7000>] ? param_array_set+0x7f/0xf2
Quoted 8 lines
[    2.812579]  [<ffffffff810a7275>] ? parse_args+0x1ad/0x26c
[    2.812579]  [<ffffffff81e11fe2>] kernel_init_freeable+0x132/0x1bc
[    2.812579]  [<ffffffff81e116e3>] ? do_early_param+0x86/0x86
[    2.812579]  [<ffffffff818488bf>] ? rest_init+0xc3/0xc3
[    2.812579]  [<ffffffff818488c8>] kernel_init+0x9/0xcc
[    2.812579]  [<ffffffff81859e3c>] ret_from_fork+0x7c/0xb0
[    2.812579]  [<ffffffff818488bf>] ? rest_init+0xc3/0xc3
[    2.812579] ---[ end trace ce7dd707bef7dc3e ]---

It appears a delayed callback is already active for that platform device? Looks weird, because in theory platform devices are allocated anew in parport_pc_probe_port():

                pdev = platform_device_register_simple("parport_pc",
                                                       base, NULL, 0);
                if (IS_ERR(pdev))
                        return NULL;
                dev = &pdev->dev;

Which is allocated via zalloc(), so no reuse.

and then released if the hardware port is not present:

out1:

        if (pdev)
                platform_device_unregister(pdev);

Thanks,

Ingo

#76 lore raw
In reply to Ingo Molnar
Quoted 32 lines · Ingo Molnar
Quoted 29 lines · Linus Torvalds
Quoted 4 lines · Fengguang Wu

On Mon, Oct 07, 2013 at 01:12:17AM -0700, Linus Torvalds wrote:

My pleasure! Here are 100 randomly selected call traces. Also attached several full dmesgs and the kconfig.

Ok, they may be randomly selected, but they are all the same. Which is good, I guess, we're only talking about one bug.

Anyway, they all have RIP:run_timer_softirq+0x12c/0x1b8, and the code is

   0: 8b 65 c8             mov    -0x38(%rbp),%esp
   3: 4d 39 ec             cmp    %r13,%r12
   6: 0f 84 2f ff ff ff     je     0xffffffffffffff3b
   c: 41 8b 4c 24 18       mov    0x18(%r12),%ecx
  11: 4d 8b 74 24 20       mov    0x20(%r12),%r14
  16: 4d 8b 7c 24 28       mov    0x28(%r12),%r15

1b: 4c 89 63 38 mov %r12,0x38(%rbx)
1f: 49 8b 44 24 08 mov 0x8(%r12),%rax
24: 49 8b 14 24 mov (%r12),%rdx
28: 83 e1 02 and $0x2,%ecx
2b:* 48 89 42 08 mov %rax,0x8(%rdx) <-- trapping instruction
2f: 48 89 10 mov %rdx,(%rax)
32: 48 b8 00 02 20 00 00 movabs $0xdead000000200200,%rax

where that constant is LIST_POISON2 and the "and $2" seems to be TIMER_IRQSAFE. So the trapping instruction *looks* like it's doing __list_del() on the timer, and timer->next is NULL.

Quoted 5 lines
Quoted 3 lines

So somebody added a timer, and then deallocated/cleared the structure before it triggered. The problem is, I can't see a way to figure out _who_ did that.

I think CONFIG_DEBUG_OBJECTS_TIMERS=y should be able to detect that?

It did help expose more information, and earlier.

w/o debugobjects, we hit the "BUG: ..." directly:

[    2.964097] BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
[    2.966666] IP: [<ffffffff81098f60>] run_timer_softirq+0x126/0x1da
[    2.968060] PGD 0
[    2.968060] Oops: 0002 [#1] PREEMPT SMP DEBUG_PAGEALLOC
[    2.968060] CPU: 0 PID: 95 Comm: kworker/0:2 Not tainted 3.11.0-rc2-00010-gc817a67-dirty #5
[    2.968060] Workqueue: events flush_to_ldisc
[    2.968060] task: ffff8800068544c0 ti: ffff880006856000 task.ti: ffff880006856000
[    2.968060] RIP: 0010:[<ffffffff81098f60>]  [<ffffffff81098f60>] run_timer_softirq+0x126/0x1da

After enabling CONFIG_DEBUG_OBJECTS_TIMERS=y, it will issue a WARNING followed by a "BUG: ..."

[    2.802167] parport_pc 00:04: reported by Plug and Play ACPI
[    2.803818] parport0: PC-style at 0x378, irq 7 [PCSPP(,...)]
[    2.806035] kobject: 'parport_pc.956' (ffff880006dc3820): kobject_release, parent           (null) (delayed)
[    2.808626] ------------[ cut here ]------------                                                            
[    2.809776] WARNING: CPU: 1 PID: 1 at /c/wfg/linux/lib/debugobjects.c:260 debug_print_object+0x7c/0x8d()
[    2.812433] ODEBUG: init active (active state 0) object type: timer_list hint:           (null)         
......
[    3.796079] BUG: unable to handle kernel NULL pointer dereference at           (null)
Quoted 10 lines

Debugobjects hooks into deallocation paths and complains immediately if a live timer is zapped that way.

If the corrupion does not involve deallocation then it might be more difficult to detect but not impossible either: for example if an object is not freed but reused incorrectly then a repeat use of any timer function will cause the debugobjects (and/or the timer code) to complain.

So I'd suggest trying debugobjects, it should catch a fair number of non-exotic object corruption patterns.

Good to know that, thanks for the info!

Regards,
Fengguang

#77 lore raw
In reply to Fengguang Wu
Quoted 4 lines · Fengguang Wu

On Mon, Oct 07, 2013 at 01:12:17AM -0700, Linus Torvalds wrote:

My pleasure! Here are 100 randomly selected call traces. Also attached several full dmesgs and the kconfig.

Ok, they may be randomly selected, but they are all the same. Which is good, I guess, we're only talking about one bug.

Anyway, they all have RIP:run_timer_softirq+0x12c/0x1b8, and the code is

   0: 8b 65 c8             mov    -0x38(%rbp),%esp
   3: 4d 39 ec             cmp    %r13,%r12
   6: 0f 84 2f ff ff ff     je     0xffffffffffffff3b
   c: 41 8b 4c 24 18       mov    0x18(%r12),%ecx
  11: 4d 8b 74 24 20       mov    0x20(%r12),%r14
  16: 4d 8b 7c 24 28       mov    0x28(%r12),%r15

1b: 4c 89 63 38 mov %r12,0x38(%rbx)
1f: 49 8b 44 24 08 mov 0x8(%r12),%rax
24: 49 8b 14 24 mov (%r12),%rdx
28: 83 e1 02 and $0x2,%ecx
2b:* 48 89 42 08 mov %rax,0x8(%rdx) <-- trapping instruction
2f: 48 89 10 mov %rdx,(%rax)
32: 48 b8 00 02 20 00 00 movabs $0xdead000000200200,%rax

where that constant is LIST_POISON2 and the "and $2" seems to be TIMER_IRQSAFE. So the trapping instruction *looks* like it's doing __list_del() on the timer, and timer->next is NULL.

So somebody added a timer, and then deallocated/cleared the structure before it triggered. The problem is, I can't see a way to figure out _who_ did that.

I *think* r14 contains the function we're going to jump to in the oops, and that could be interesting to know, but it's not decoded, so you'd have to match it up against a symbol map...

Linus

#78 lore raw
In reply to Fengguang Wu
Quoted 4 lines · Fengguang Wu

I retried bisect with "Oops:" and the first bad commit is

commit c817a67ecba7c3 ("kobject: delayed kobject release: help find buggy drivers")

Ok, that makes way more sense.

Quoted 7 lines

That commit has already helped expose some bugs, however I suspect there are still many hidden ones. In this particular bisect, the commit produces 85 good dmesgs and 2055 bad dmesgs, exposing all sorts of error messages

1929 Oops: 0002 [#1] PREEMPT SMP DEBUG_PAGEALLOC
1921 BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 1897 Kernel panic - not syncing: Fatal exception in interrupt

..

Ok, can you post some of the more promising oopses so that we can try to figure out what kobject it is that causes problems?

Linus

#79 lore raw
In reply to Fengguang Wu
Quoted 18 lines · Fengguang Wu
Quoted 10 lines · Linus Torvalds
Quoted 3 lines · Fengguang Wu

I got the below dmesg and the first bad commit is commit cf39c8e5352b:
Merge tag 'stable/for-linus-3.12-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip

Ugh. How reliable is the double fault? Because bisecting it to the merge that didn't even have any conflicts in it as far as I can remember means that there's something really subtle going on wrt some semantic conflict or other. Or, alternatively, it means that the bisect failed because the double fault isn't 100% reliable..

Oops, it's not a reliable bisect...

The "first" bad commit cf39c8e5352b4fb9efedfe7e9acb566a85ed847c runs and produces 25 good dmesgs and 3530 bad dmesgs, however only 1 of the bad boots has "double fault:" in its dmesg.

Quoted 7 lines

Looking into all the 3530 bad dmesgs, I find all kinds of bug messages:

$ grep_crash_head -h dmesg-* | sed 's/^[^a-zA-Z]*//' | sort | uniq -c | sort -nr

3086 Oops: 0002 [#1] PREEMPT SMP DEBUG_PAGEALLOC
3047 BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 3046 Kernel panic - not syncing: Fatal exception in interrupt

I retried bisect with "Oops:" and the first bad commit is

commit c817a67ecba7c3c2aaa104796d78f160af60920d

Author: Russell King <[email protected]>
Date:   Thu Jun 27 15:06:14 2013 +0100

kobject: delayed kobject release: help find buggy drivers

Implement debugging for kobject release functions. kobjects are reference counted, so the drop of the last reference to them is not predictable. However, the common case is for the last reference to be the kobject's removal from a subsystem, which results in the release function being immediately called.

This can hide subtle bugs, which can occur when another thread holds a reference to the kobject at the same time that a kobject is removed. This results in the release method being delayed.

In order to make these kinds of problems more visible, the following patch implements a delayed release; this has the effect that the release function will be out of order with respect to the removal of the kobject in the same manner that it would be if a reference was being held.

This provides us with an easy way to allow driver writers to debug their drivers and fix otherwise hidden problems.

That commit has already helped expose some bugs, however I suspect there are still many hidden ones. In this particular bisect, the commit produces 85 good dmesgs and 2055 bad dmesgs, exposing all sorts of error messages

1929 Oops: 0002 [#1] PREEMPT SMP DEBUG_PAGEALLOC
1921 BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 1897 Kernel panic - not syncing: Fatal exception in interrupt

     56 WARNING: CPU: 0 PID: 1 at /c/wfg/mm/kernel/workqueue.c:590 set_work_data+0x33/0x50()
     28 kernel BUG at /c/wfg/mm/mm/slab.c:3011!
     27 invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
     19 Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
     16 INFO: lockdep is turned off.
     13 general protection fault: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
     13 BUG: unable to handle kernel 
      8 BUG: sleeping function called from invalid context at /c/wfg/mm/kernel/rwsem.c:20
      6 WARNING: CPU: 0 PID: 0 at /c/wfg/mm/lib/debugobjects.c:260 debug_print_object+0x7c/0x8b()
      6 WARNING: CPU: 0 PID: 0 at /c/wfg/mm/kernel/workqueue.c:457 work_fixup_activate+0x6a/0x6f()
      6 WARNING: CPU: 0 PID: 0 at /c/wfg/mm/kernel/workqueue.c:1378 __queue_work+0x1a1/0x1ee()
      5 WARNING: CPU: 1 PID: 0 at /c/wfg/mm/lib/debugobjects.c:260 debug_print_object+0x7c/0x8b()
      5 WARNING: CPU: 1 PID: 0 at /c/wfg/mm/kernel/workqueue.c:457 work_fixup_activate+0x6a/0x6f()
      5 WARNING: CPU: 1 PID: 0 at /c/wfg/mm/kernel/workqueue.c:1378 __queue_work+0x1a1/0x1ee()
      5 Oops: 0002 [#1] 
      4 WARNING: CPU: 1 PID: 0 at /c/wfg/mm/kernel/workqueue.c:590 set_work_data+0x33/0x50()
      4 Oops: 0000 [#2] PREEMPT SMP DEBUG_PAGEALLOC
      4 BUG: unable to handle kernel NULL pointer dereference
      3 Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
      3 BUG: kernel boot crashed
      2 WARNING: CPU: 1 PID: 1 at /c/wfg/mm/kernel/workqueue.c:590 set_work_data+0x33/0x50()
      2 BUG: unable to handle kernel paging request at ffffffffffffffa8
      2 BUG: unable to handle kernel NULL pointer dereference at 00000000000000a0
      2 BUG: unable to handle kernel NULL pointer dereference at 0000000000000017
      2 BUG: scheduling while atomic: rc.local/135/0x10000002

In comparison, its parent commit 7c42721fe0 ("char: tile-srom: fix build error") boots fine 10001 times w/o a single error. It also goes quiet if reverting the commit on top of upstream kernel.

Thanks,
Fengguang

#80 lore raw
In reply to Linus Torvalds
Quoted 10 lines · Linus Torvalds
Quoted 3 lines · Fengguang Wu

I got the below dmesg and the first bad commit is commit cf39c8e5352b:
Merge tag 'stable/for-linus-3.12-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip

Ugh. How reliable is the double fault? Because bisecting it to the merge that didn't even have any conflicts in it as far as I can remember means that there's something really subtle going on wrt some semantic conflict or other. Or, alternatively, it means that the bisect failed because the double fault isn't 100% reliable..

Oops, it's not a reliable bisect...

The "first" bad commit cf39c8e5352b4fb9efedfe7e9acb566a85ed847c runs and produces 25 good dmesgs and 3530 bad dmesgs, however only 1 of the bad boots has "double fault:" in its dmesg.

Looking into all the 3530 bad dmesgs, I find all kinds of bug messages:

$ grep_crash_head -h dmesg-* | sed 's/^[^a-zA-Z]*//' | sort | uniq -c | sort -nr

3086 Oops: 0002 [#1] PREEMPT SMP DEBUG_PAGEALLOC
3047 BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 3046 Kernel panic - not syncing: Fatal exception in interrupt 2969 BUG: kernel boot oops

    374 BUG: kernel test oops
    255 WARNING: CPU: 0 PID: 1 at /c/wfg/linux-drm/kernel/workqueue.c:591 set_work_data+0x33/0x50()
    167 kernel BUG at /c/wfg/linux-drm/mm/slab.c:3011!
    167 invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
    148 Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
     48 INFO: lockdep is turned off.
     43 BUG: unable to handle kernel 
     33 BUG: kernel boot crashed
     30 BUG: sleeping function called from invalid context at /c/wfg/linux-drm/kernel/rwsem.c:20
     27 general protection fault: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
     17 WARNING: CPU: 0 PID: 0 at /c/wfg/linux-drm/lib/debugobjects.c:260 debug_print_object+0x7c/0x8b()
     17 WARNING: CPU: 0 PID: 0 at /c/wfg/linux-drm/kernel/workqueue.c:458 work_fixup_activate+0x6a/0x6f()
     17 WARNING: CPU: 0 PID: 0 at /c/wfg/linux-drm/kernel/workqueue.c:1379 __queue_work+0x1a1/0x1ee()
     13 WARNING: CPU: 0 PID: 0 at /c/wfg/linux-drm/kernel/workqueue.c:591 set_work_data+0x33/0x50()
     13 BUG: unable to handle kernel NULL pointer dereference at           (null)
     12 Oops: 0010 [#1] PREEMPT SMP DEBUG_PAGEALLOC
     11 WARNING: CPU: 1 PID: 0 at /c/wfg/linux-drm/lib/debugobjects.c:260 debug_print_object+0x7c/0x8b()
     11 WARNING: CPU: 1 PID: 0 at /c/wfg/linux-drm/kernel/workqueue.c:458 work_fixup_activate+0x6a/0x6f()
     11 WARNING: CPU: 1 PID: 0 at /c/wfg/linux-drm/kernel/workqueue.c:1379 __queue_work+0x1a1/0x1ee()
     11 Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
      9 INFO: trying to register non-static key.
      9 BUG: scheduling while atomic: init/136/0x10000002
      8 WARNING: CPU: 1 PID: 0 at /c/wfg/linux-drm/kernel/workqueue.c:591 set_work_data+0x33/0x50()
      8 BUG: unable to handle kernel NULL pointer dereference
      6 Oops: 0000 [#2] PREEMPT SMP DEBUG_PAGEALLOC
      5 BUG: unable to handle kernel paging request at ffffffffffffffa8
      5 BUG: Bad page map in process init  pte:ffffffffffffffff pmd:06d9e067
      5 BUG: Bad page map in process init  pte:ffffffff pmd:06d9e067
      4 Oops: 0002 [#1] 
      4 Kernel panic - not syncing: Attempted to kill the idle task!
      4 BUG: unable to handle kernel paging request at ffff88000cd94000
      3 invalid opcode: 0000 [#2] PREEMPT SMP DEBUG_PAGEALLOC
      3 WARNING: CPU: 1 PID: 95 at /c/wfg/linux-drm/lib/debugobjects.c:260 debug_print_object+0x7c/0x8b()
      3 WARNING: CPU: 1 PID: 95 at /c/wfg/linux-drm/kernel/workqueue.c:458 work_fixup_activate+0x6a/0x6f()
      3 WARNING: CPU: 1 PID: 95 at /c/wfg/linux-drm/kernel/workqueue.c:1379 __queue_work+0x1a1/0x1ee()
      3 WARNING: CPU: 1 PID: 1 at /c/wfg/linux-drm/lib/debugobjects.c:260 debug_print_object+0x7c/0x8b()
      3 WARNING: CPU: 1 PID: 1 at /c/wfg/linux-drm/kernel/workqueue.c:458 work_fixup_activate+0x6a/0x6f()
      3 WARNING: CPU: 1 PID: 1 at /c/wfg/linux-drm/kernel/workqueue.c:1379 __queue_work+0x1a1/0x1ee()
      3 WARNING: CPU: 0 PID: 116 at /c/wfg/linux-drm/kernel/workqueue.c:591 set_work_data+0x33/0x50()
      3 BUG: kernel boot hang
      3 BUG: Bad page map in process init  pte:ffffffff81f0fa00 pmd:06d9e067
      3 BUG: Bad page map in process init  pte:ffffffff81b52e93 pmd:06d9e067
      3 BUG: Bad page map in process init  pte:dead4ead00000000 pmd:06d9e067
      2 kernel BUG at /c/wfg/linux-drm/include/linux/mm.h:286!
      2 general protection fault: 0000 [#2] PREEMPT SMP DEBUG_PAGEALLOC
      2 WARNING: CPU: 1 PID: 130 at /c/wfg/linux-drm/drivers/tty/tty_mutex.c:23 tty_lock_nested+0x34/0x83()
      2 WARNING: CPU: 1 PID: 121 at /c/wfg/linux-drm/kernel/workqueue.c:591 set_work_data+0x33/0x50()
      2 WARNING: CPU: 1 PID: 1 at /c/wfg/linux-drm/kernel/workqueue.c:591 set_work_data+0x33/0x50()
      2 WARNING: CPU: 0 PID: 20 at /c/wfg/linux-drm/lib/debugobjects.c:260 debug_print_object+0x7c/0x8b()
      2 WARNING: CPU: 0 PID: 20 at /c/wfg/linux-drm/kernel/workqueue.c:458 work_fixup_activate+0x6a/0x6f()
      2 WARNING: CPU: 0 PID: 20 at /c/wfg/linux-drm/kernel/workqueue.c:1379 __queue_work+0x1a1/0x1ee()
      2 WARNING: CPU: 0 PID: 1 at /c/wfg/linux-drm/lib/debugobjects.c:260 debug_print_object+0x7c/0x8b()
      2 WARNING: CPU: 0 PID: 1 at /c/wfg/linux-drm/kernel/workqueue.c:458 work_fixup_activate+0x6a/0x6f()
      2 WARNING: CPU: 0 PID: 1 at /c/wfg/linux-drm/kernel/workqueue.c:1379 __queue_work+0x1a1/0x1ee()
      2 Oops: 0002 [#1] PREEMPT 
      2 Oops: 0000 [#3] PREEMPT SMP DEBUG_PAGEALLOC
      2 BUG: unable to handle kernel paging request at 0000000000010012
      2 BUG: unable to handle kernel NULL pointer dereference at 00000000000008e0
      2 BUG: unable to handle kernel NULL pointer dereference at 0000000000000018
      2 BUG: unable to handle kernel NULL pointer dereference at 0000000000000017
      2 BUG: unable to handle kernel NULL pointer dereference at 0000000000000004
      2 BUG: scheduling while atomic: rc.local/134/0x10000002
      2 BUG: scheduling while atomic: S99-rc.local/210/0x10000002
      2 BUG: Bad page map in process init  pte:ffffffff81b6e50a pmd:06d9e067
      2 BUG: Bad page map in process init  pte:ffff880006d9e290 pmd:06d9e067
      2 BUG: Bad page map in process init  pte:ffff880006d9e208 pmd:06d9e067
      2 BUG: Bad page map in process init  pte:ffff880006d9e180 pmd:06d9e067
      2 BUG: Bad page map in process init  pte:ffff880006d9e0f8 pmd:06d9e067
      2 BUG: Bad page map in process init  pte:ffff880006d9e080 pmd:06d9e067
      2 BUG: Bad page map in process init  pte:ffff880006d9e070 pmd:06d9e067
      2 BUG: Bad page map in process init  pte:00000001 pmd:06d9e067
      1 tail/181 is trying to release lock (&sig->cred_guard_mutex) at:
      1 kernel BUG at /c/wfg/linux-drm/mm/slab.c:463!
      1 general protection fault: 0000 [#3] PREEMPT SMP DEBUG_PAGEALLOC
      1 double fault: 0000 [#9] PREEMPT SMP DEBUG_PAGEALLOC
      1 WARNING: CPU: 1 PID: 95 at /c/wfg/linux-drm/kernel/workqueue.c:591 set_work_data+0x33/0x50()
      1 WARNING: CPU: 1 PID: 222 at /c/wfg/linux-drm/include/linux/kref.h:47 kobject_get+0x37/0x44()
      1 WARNING: CPU: 1 PID: 22 at /c/wfg/linux-drm/lib/debugobjects.c:260 debug_print_object+0x7c/0x8b()
      1 WARNING: CPU: 1 PID: 22 at /c/wfg/linux-drm/kernel/workqueue.c:591 set_work_data+0x33/0x50()
      1 WARNING: CPU: 1 PID: 22 at /c/wfg/linux-drm/kernel/workqueue.c:458 work_fixup_activate+0x6a/0x6f()
      1 WARNING: CPU: 1 PID: 22 at /c/wfg/linux-drm/kernel/workqueue.c:1379 __queue_work+0x1a1/0x1ee()
      1 WARNING: CPU: 1 PID: 168 at /c/wfg/linux-drm/lib/debugobjects.c:260 debug_print_object+0x7c/0x8b()
      1 WARNING: CPU: 1 PID: 168 at /c/wfg/linux-drm/kernel/workqueue.c:458 work_fixup_activate+0x6a/0x6f()
      1 WARNING: CPU: 1 PID: 168 at /c/wfg/linux-drm/kernel/workqueue.c:1379 __queue_work+0x1a1/0x1ee()
      1 WARNING: CPU: 1 PID: 130 at /c/wfg/linux-drm/include/linux/kref.h:47 kref_get+0x2d/0x36()
      1 WARNING: CPU: 1 PID: 130 at /c/wfg/linux-drm/drivers/tty/tty_io.c:1411 tty_open+0x215/0x42b()
      1 WARNING: CPU: 1 PID: 129 at /c/wfg/linux-drm/kernel/workqueue.c:591 set_work_data+0x33/0x50()
      1 WARNING: CPU: 1 PID: 122 at /c/wfg/linux-drm/lib/debugobjects.c:260 debug_print_object+0x7c/0x8b()
      1 WARNING: CPU: 1 PID: 122 at /c/wfg/linux-drm/kernel/workqueue.c:458 work_fixup_activate+0x6a/0x6f()
      1 WARNING: CPU: 1 PID: 122 at /c/wfg/linux-drm/kernel/workqueue.c:1379 __queue_work+0x1a1/0x1ee()
      1 WARNING: CPU: 1 PID: 120 at /c/wfg/linux-drm/kernel/workqueue.c:591 set_work_data+0x33/0x50()
      1 WARNING: CPU: 1 PID: 119 at /c/wfg/linux-drm/kernel/workqueue.c:591 set_work_data+0x33/0x50()
      1 WARNING: CPU: 1 PID: 118 at /c/wfg/linux-drm/kernel/workqueue.c:591 set_work_data+0x33/0x50()
      1 WARNING: CPU: 1 PID: 117 at /c/wfg/linux-drm/kernel/workqueue.c:591 set_work_data+0x33/0x50()
      1 WARNING: CPU: 1 PID: 116 at /c/wfg/linux-drm/kernel/workqueue.c:591 set_work_data+0x33/0x50()
      1 WARNING: CPU: 1 PID: 114 at /c/wfg/linux-drm/kernel/workqueue.c:591 set_work_data+0x33/0x50()
      1 WARNING: CPU: 0 PID: 8 at /c/wfg/linux-drm/lib/debugobjects.c:260 debug_print_object+0x7c/0x8b()
      1 WARNING: CPU: 0 PID: 8 at /c/wfg/linux-drm/kernel/workqueue.c:591 set_work_data+0x33/0x50()
      1 WARNING: CPU: 0 PID: 8 at /c/wfg/linux-drm/kernel/workqueue.c:458 work_fixup_activate+0x6a/0x6f()
      1 WARNING: CPU: 0 PID: 8 at /c/wfg/linux-drm/kernel/workqueue.c:1379 __queue_work+0x1a1/0x1ee()
      1 WARNING: CPU: 0 PID: 129 at /c/wfg/linux-drm/kernel/workqueue.c:591 set_work_data+0x33/0x50()
      1 WARNING: CPU: 0 PID: 125 at /c/wfg/linux-drm/lib/debugobjects.c:260 debug_print_object+0x7c/0x8b()
      1 WARNING: CPU: 0 PID: 125 at /c/wfg/linux-drm/kernel/workqueue.c:458 work_fixup_activate+0x6a/0x6f()
      1 WARNING: CPU: 0 PID: 125 at /c/wfg/linux-drm/kernel/workqueue.c:1379 __queue_work+0x1a1/0x1ee()
      1 WARNING: CPU: 0 PID: 119 at /c/wfg/linux-drm/kernel/workqueue.c:591 set_work_data+0x33/0x50()
      1 WARNING: CPU: 0 PID: 118 at /c/wfg/linux-drm/kernel/workqueue.c:591 set_work_data+0x33/0x50()
      1 Oops: 0010 [#2] PREEMPT SMP DEBUG_PAGEALLOC
      1 Oops: 0002 [#2] PREEMPT SMP DEBUG_PAGEALLOC
      1 Oops: 0002 [#1] e PorR dEirEecMtoPryT
      1 Oops: 0002 [#1] dPonRe.E
      1 Oops: 0002 [#1] PREEMPT SMP puDlaEteB-vUolGat_ilPe.AGEALLOC
      1 Oops: 0002 [#1] PREEMPT SMP 
      1 Oops: 0002 [#1] PREEMPT /bSinM/sPh:  /procD/sEBUG_PAGEALLOC
      1 Oops: 0000 [#4] PREEMPT SMP DEBUG_PAGEALLOC
      1 Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009
      1 INFO: NMI handler (arch_trigger_all_cpu_backtrace_handler) took too long to run: 2.349 msecs
      1 BUG: unable to handle kernel paging request at ffff88000cd6c800
      1 BUG: unable to handle kernel paging request at 00002939a1ff0088
      1 BUG: unable to handle kernel paging request at 0000200000000000
      1 BUG: unable to handle kernel paging request at 000000010000003f
      1 BUG: unable to handle kernel paging request at 000000007fffffff
      1 BUG: unable to handle kernel paging request at 0000000003ffffc0
      1 BUG: unable to handle kernel ULL pointer dereference at 0000000000000008
      1 BUG: unable to handle kernel ULL pointer dereference
      1 BUG: unable to handle kernel PleaNse wULait: bLoo pointer dereference at 0000000000000008
      1 BUG: unable to handle kernel NULL pointerereference at 0000000000000008
      1 BUG: unable to handle kernel NULL pointer dereference at 0000000000000027
      1 BUG: unable to handle kernel NULL pointer dereference at 0000000000000014
      1 BUG: unable to handle kernel NULL pointer dereference at 0000000000000001
      1 BUG: unable to handle kernel NULL poinr deference at 0000000000000008
      1 BUG: unable to 9: No suchandle kernel NULL pointer dereference at 0000000000000008
      1 BUG: spinlock lockup suspected on CPU#1, migration/1/11
      1 BUG: spinlock lockup suspected on CPU#1, kworker/1:1/20
      1 BUG: spinlock lockup suspected on CPU#0, sh/126
      1 BUG: spinlock lockup suspected on CPU#0, sh/115
      1 BUG: scheduling while atomic: sh/130/0x10000002
      1 BUG: scheduling while atomic: reboot/222/0x10000002
      1 BUG: scheduling while atomic: rc/212/0x10000002
      1 BUG: scheduling while atomic: init/212/0x10000002
      1 BUG: scheduling while atomic: init/138/0x10000002
      1 BUG: Bad rss-counter state mm:ffff88000ca206c0 idx:1 val:2
      1 BUG: Bad rss-counter state mm:ffff88000c9d4080 idx:1 val:2
      1 BUG: Bad rss-counter state mm:ffff880006a106c0 idx:1 val:2
      1 BUG: Bad page map in process init  pte:ffffffff82863660 pmd:06d9e067
      1 BUG: Bad page map in process init  pte:ffffffff828632c0 pmd:06d9e067
      1 BUG: Bad page map in process init  pte:ffffffff828632b8 pmd:06d9e067
      1 BUG: Bad page map in process init  pte:ffffffff828632b0 pmd:06d9e067
      1 BUG: Bad page map in process init  pte:ffffffff828632a0 pmd:06d9e067
      1 BUG: Bad page map in process init  pte:ffffffff82863280 pmd:06d9e067
      1 BUG: Bad page map in process init  pte:ffffffff8275cf00 pmd:06d9e067
      1 BUG: Bad page map in process init  pte:ffffffff82314d30 pmd:06d9e067
      1 BUG: Bad page map in process init  pte:ffffffff82310d10 pmd:06d9e067
      1 BUG: Bad page map in process init  pte:ffffffff823102f0 pmd:06d9e067
      1 BUG: Bad page map in process init  pte:ffffffff8230e7f0 pmd:06d9e067
      1 BUG: Bad page map in process init  pte:ffffffff81b8ab2a pmd:06d9e067
      1 BUG: Bad page map in process init  pte:ffffffff81b8aaf9 pmd:06d9e067
      1 BUG: Bad page map in process init  pte:ffffffff81b8aabc pmd:06d9e067
      1 BUG: Bad page map in process init  pte:ffffffff81b8aaa9 pmd:06d9e067
      1 BUG: Bad page map in process init  pte:ffffffff8191eba0 pmd:06d9e067
      1 BUG: Bad page map in process init  pte:ffff8800076d53c0 pmd:06d9e067
      1 BUG: Bad page map in process init  pte:ffff880006d9e1c8 pmd:06d9e067
      1 BUG: Bad page map in process init  pte:ffff880006d9e140 pmd:06d9e067
      1 BUG: Bad page map in process init  pte:ffff880006d9e0b8 pmd:06d9e067
      1 BUG: Bad page map in process init  pte:ffff880006d90000 pmd:06d9e067
      1 BUG: Bad page map in process init  pte:ffff88000692ec40 pmd:06d9e067
      1 BUG: Bad page map in process init  pte:dead4ead003c003c pmd:06d9e067
      1 BUG: Bad page map in process init  pte:dead4ead002c002c pmd:06d9e067
      1 BUG: Bad page map in process init  pte:200005401 pmd:06d9e067

It's not really the "first" bad commit because its parent commit 3398d252a4d
("Merge tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kerne l/git/rusty/linux") has a similar 495 good dmesgs and 14587 bad dmesgs with error messages:

13847 Oops: 0002 [#1] PREEMPT SMP DEBUG_PAGEALLOC
13792 BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 13760 Kernel panic - not syncing: Fatal exception in interrupt 10011 BUG: kernel boot oops
4280 BUG: kernel test oops

    382 WARNING: CPU: 0 PID: 1 at /c/wfg/linux-drm/kernel/workqueue.c:591 set_work_data+0x33/0x50()
    316 kernel BUG at /c/wfg/linux-drm/mm/slab.c:3011!
    301 invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
    225 Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
    178 INFO: lockdep is turned off.
     84 BUG: sleeping function called from invalid context at /c/wfg/linux-drm/kernel/rwsem.c:20
     65 BUG: unable to handle kernel 
     52 WARNING: CPU: 0 PID: 0 at /c/wfg/linux-drm/lib/debugobjects.c:260 debug_print_object+0x7c/0x8b()
     52 WARNING: CPU: 0 PID: 0 at /c/wfg/linux-drm/kernel/workqueue.c:458 work_fixup_activate+0x6a/0x6f()
     52 WARNING: CPU: 0 PID: 0 at /c/wfg/linux-drm/kernel/workqueue.c:1379 __queue_work+0x1a1/0x1ee()
     42 WARNING: CPU: 0 PID: 0 at /c/wfg/linux-drm/kernel/workqueue.c:591 set_work_data+0x33/0x50()
     40 general protection fault: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
     38 WARNING: CPU: 1 PID: 0 at /c/wfg/linux-drm/lib/debugobjects.c:260 debug_print_object+0x7c/0x8b()
     38 WARNING: CPU: 1 PID: 0 at /c/wfg/linux-drm/kernel/workqueue.c:458 work_fixup_activate+0x6a/0x6f()
     38 WARNING: CPU: 1 PID: 0 at /c/wfg/linux-drm/kernel/workqueue.c:1379 __queue_work+0x1a1/0x1ee()
     29 BUG: kernel boot crashed
     27 WARNING: CPU: 1 PID: 0 at /c/wfg/linux-drm/kernel/workqueue.c:591 set_work_data+0x33/0x50()
     22 BUG: scheduling while atomic: init/136/0x10000002
     21 BUG: scheduling while atomic: S99-rc.local/210/0x10000002
     17 invalid opcode: 0000 [#2] PREEMPT SMP DEBUG_PAGEALLOC
     15 Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
     14 Oops: 0010 [#1] PREEMPT SMP DEBUG_PAGEALLOC
     13 Oops: 0000 [#2] PREEMPT SMP DEBUG_PAGEALLOC
     13 BUG: unable to handle kernel NULL pointer dereference at           (null)
     13 BUG: unable to handle kernel NULL pointer dereference
     10 BUG: unable to handle kernel paging request at ffffffffffffffa8
      8 Oops: 0002 [#1] 
      8 BUG: scheduling while atomic: init/214/0x10000002
      8 BUG: scheduling while atomic: init/212/0x10000002
      7 BUG: scheduling while atomic: init/213/0x10000002
      6 WARNING: CPU: 1 PID: 1 at /c/wfg/linux-drm/kernel/workqueue.c:591 set_work_data+0x33/0x50()
      6 BUG: unable to handle kernel paging request at 0000000000010012
      6 BUG: unable to handle kernel NULL pointer dereference at 0000000000000001
      6 BUG: scheduling while atomic: rc.local/134/0x10000002
      5 WARNING: CPU: 1 PID: 1 at /c/wfg/linux-drm/lib/debugobjects.c:260 debug_print_object+0x7c/0x8b()
      5 WARNING: CPU: 1 PID: 1 at /c/wfg/linux-drm/kernel/workqueue.c:458 work_fixup_activate+0x6a/0x6f()
      5 WARNING: CPU: 1 PID: 1 at /c/wfg/linux-drm/kernel/workqueue.c:1379 __queue_work+0x1a1/0x1ee()
      4 BUG: unable to handle kernel NULL pointer dereference at 00000000000008e0
      4 BUG: scheduling while atomic: ifconfig/230/0x10000002
      4 BUG: kernel boot hang
      3 WARNING: CPU: 1 PID: 117 at /c/wfg/linux-drm/kernel/workqueue.c:591 set_work_data+0x33/0x50()
      3 WARNING: CPU: 1 PID: 116 at /c/wfg/linux-drm/kernel/workqueue.c:591 set_work_data+0x33/0x50()
      3 WARNING: CPU: 0 PID: 1 at /c/wfg/linux-drm/lib/debugobjects.c:260 debug_print_object+0x7c/0x8b()
      3 WARNING: CPU: 0 PID: 1 at /c/wfg/linux-drm/kernel/workqueue.c:458 work_fixup_activate+0x6a/0x6f()
      3 WARNING: CPU: 0 PID: 1 at /c/wfg/linux-drm/kernel/workqueue.c:1379 __queue_work+0x1a1/0x1ee()
      3 INFO: trying to register non-static key.
      3 BUG: unable to handle kernel paging request at ffff88000cd9f000
      3 BUG: unable to handle kernel N
      3 BUG: scheduling while atomic: rc/212/0x10000002
      2 kernel BUG at /c/wfg/linux-drm/mm/slab.c:463!
      2 WARNING: CPU: 1 PID: 121 at /c/wfg/linux-drm/kernel/workqueue.c:591 set_work_data+0x33/0x50()
      2 WARNING: CPU: 1 PID: 120 at /c/wfg/linux-drm/kernel/workqueue.c:591 set_work_data+0x33/0x50()
      2 WARNING: CPU: 1 PID: 118 at /c/wfg/linux-drm/kernel/workqueue.c:591 set_work_data+0x33/0x50()
      2 WARNING: CPU: 0 PID: 22 at /c/wfg/linux-drm/lib/debugobjects.c:260 debug_print_object+0x7c/0x8b()
      2 WARNING: CPU: 0 PID: 22 at /c/wfg/linux-drm/kernel/workqueue.c:458 work_fixup_activate+0x6a/0x6f()
      2 WARNING: CPU: 0 PID: 22 at /c/wfg/linux-drm/kernel/workqueue.c:1379 __queue_work+0x1a1/0x1ee()
      2 WARNING: CPU: 0 PID: 20 at /c/wfg/linux-drm/lib/debugobjects.c:260 debug_print_object+0x7c/0x8b()
      2 WARNING: CPU: 0 PID: 20 at /c/wfg/linux-drm/kernel/workqueue.c:458 work_fixup_activate+0x6a/0x6f()
      2 WARNING: CPU: 0 PID: 20 at /c/wfg/linux-drm/kernel/workqueue.c:1379 __queue_work+0x1a1/0x1ee()
      2 WARNING: CPU: 0 PID: 130 at /c/wfg/linux-drm/drivers/tty/tty_mutex.c:23 tty_lock_nested+0x34/0x83()
      2 WARNING: CPU: 0 PID: 124 at /c/wfg/linux-drm/kernel/workqueue.c:591 set_work_data+0x33/0x50()
      2 WARNING: CPU: 0 PID: 123 at /c/wfg/linux-drm/kernel/workqueue.c:591 set_work_data+0x33/0x50()
      2 Oops: 0002 [#2] PREEMPT SMP DEBUG_PAGEALLOC
      2 Oops: 0000 [#3] PREEMPT SMP DEBUG_PAGEALLOC
      2 BUG: unable to handle kernel ULL pointer dereference at 0000000000000008
      2 BUG: unable to handle kernel NULL pointer dereference at 0000000000000018
      2 BUG: scheduling while atomic: reboot/210/0x10000002
      2 BUG: scheduling while atomic: rc/136/0x10000002
      2 BUG: scheduling while atomic: S20sendsigs/141/0x10000002
      1 t[ri ni ty: n ot  f1o.668013] Kernel panic - not syncing: Fatal exception in interrupt
      1 sh: /[pr oc /s  4.771591] Oops: 0002 [#1] PREEMPT SMP DEBUG_PAGEALLOC
      1 proc o[n /proc  fa   2.048043] Oops: 0002 [#1] PREEMPT SMP DEBUG_PAGEALLOC
      1 n/modp[ro be :   2.087974] Oops: 0002 [#1] PREEMPT SMP DEBUG_PAGEALLOC
      1 kernel BUG at /c/wfg/linux-drm/kernel/cred.c:758!
      1 invalid opcode: 0000 [#3] PREEMPT SMP DEBUG_PAGEALLOC
      1 gr[ep :  /p ro c/2fi.le087655] Oops: 0002 [#1] PREEMPT SMP DEBUG_PAGEALLOCsy
      1 general protection fault: 0000 [#3] PREEMPT SMP DEBUG_PAGEALLOC
      1 et c/rc5 .d1.667815] Oops: 0002 [#1] PREEMPT SMP DEBUG_PAGEALLOC/S99-rc.loca
      1 bi[n/ sh : / pr oc4/s.179326] Oops: 0002 [#1] PREEMPT SMP DEBUG_PAGEALLOC
      1 WARNING: CPU: 1 PID: 96 at /c/wfg/linux-drm/lib/debugobjects.c:260 debug_print_object+0x7c/0x8b()
      1 WARNING: CPU: 1 PID: 96 at /c/wfg/linux-drm/kernel/workqueue.c:458 work_fixup_activate+0x6a/0x6f()
      1 WARNING: CPU: 1 PID: 96 at /c/wfg/linux-drm/kernel/workqueue.c:1379 __queue_work+0x1a1/0x1ee()
      1 WARNING: CPU: 1 PID: 221 at /c/wfg/linux-drm/include/linux/kref.h:47 kobject_get+0x37/0x44()
      1 WARNING: CPU: 1 PID: 22 at /c/wfg/linux-drm/kernel/lockdep.c:960 __bfs+0xf1/0x1b3()
      1 WARNING: CPU: 1 PID: 138 at /c/wfg/linux-drm/drivers/tty/tty_mutex.c:23 tty_lock_nested+0x34/0x83()
      1 WARNING: CPU: 1 PID: 122 at /c/wfg/linux-drm/kernel/workqueue.c:591 set_work_data+0x33/0x50()
      1 WARNING: CPU: 1 PID: 120 at /c/wfg/linux-drm/lib/debugobjects.c:260 debug_print_object+0x7c/0x8b()
      1 WARNING: CPU: 1 PID: 120 at /c/wfg/linux-drm/kernel/workqueue.c:458 work_fixup_activate+0x6a/0x6f()
      1 WARNING: CPU: 1 PID: 120 at /c/wfg/linux-drm/kernel/workqueue.c:1379 __queue_work+0x1a1/0x1ee()
      1 WARNING: CPU: 1 PID: 12 at /c/wfg/linux-drm/lib/debugobjects.c:260 debug_print_object+0x7c/0x8b()
      1 WARNING: CPU: 1 PID: 12 at /c/wfg/linux-drm/kernel/workqueue.c:458 work_fixup_activate+0x6a/0x6f()
      1 WARNING: CPU: 1 PID: 12 at /c/wfg/linux-drm/kernel/workqueue.c:1379 __queue_work+0x1a1/0x1ee()
      1 WARNING: CPU: 1 PID: 119 at /c/wfg/linux-drm/kernel/workqueue.c:591 set_work_data+0x33/0x50()
      1 WARNING: CPU: 1 PID: 115 at /c/wfg/linux-drm/kernel/workqueue.c:591 set_work_data+0x33/0x50()
      1 WARNING: CPU: 1 PID: 113 at /c/wfg/linux-drm/kernel/workqueue.c:591 set_work_data+0x33/0x50()
      1 WARNING: CPU: 0 PID: 221 at /c/wfg/linux-drm/include/linux/kref.h:47 kobject_get+0x37/0x44()
      1 WARNING: CPU: 0 PID: 200 at /c/wfg/linux-drm/kernel/workqueue.c:591 set_work_data+0x33/0x50()
      1 WARNING: CPU: 0 PID: 20 at /c/wfg/linux-drm/kernel/workqueue.c:591 set_work_data+0x33/0x50()
      1 WARNING: CPU: 0 PID: 199 at /c/wfg/linux-drm/kernel/workqueue.c:591 set_work_data+0x33/0x50()
      1 WARNING: CPU: 0 PID: 196 at /c/wfg/linux-drm/kernel/workqueue.c:591 set_work_data+0x33/0x50()
      1 WARNING: CPU: 0 PID: 191 at /c/wfg/linux-drm/kernel/workqueue.c:591 set_work_data+0x33/0x50()
      1 WARNING: CPU: 0 PID: 187 at /c/wfg/linux-drm/kernel/workqueue.c:591 set_work_data+0x33/0x50()
      1 WARNING: CPU: 0 PID: 168 at /c/wfg/linux-drm/kernel/workqueue.c:591 set_work_data+0x33/0x50()
      1 WARNING: CPU: 0 PID: 162 at /c/wfg/linux-drm/lib/debugobjects.c:260 debug_print_object+0x7c/0x8b()
      1 WARNING: CPU: 0 PID: 162 at /c/wfg/linux-drm/kernel/workqueue.c:591 set_work_data+0x33/0x50()
      1 WARNING: CPU: 0 PID: 162 at /c/wfg/linux-drm/kernel/workqueue.c:458 work_fixup_activate+0x6a/0x6f()
      1 WARNING: CPU: 0 PID: 162 at /c/wfg/linux-drm/kernel/workqueue.c:1379 __queue_work+0x1a1/0x1ee()
      1 WARNING: CPU: 0 PID: 147 at /c/wfg/linux-drm/kernel/workqueue.c:591 set_work_data+0x33/0x50()
      1 WARNING: CPU: 0 PID: 144 at /c/wfg/linux-drm/kernel/workqueue.c:591 set_work_data+0x33/0x50()
      1 WARNING: CPU: 0 PID: 132 at /c/wfg/linux-drm/kernel/workqueue.c:591 set_work_data+0x33/0x50()
      1 WARNING: CPU: 0 PID: 130 at /c/wfg/linux-drm/include/linux/kref.h:47 kref_get+0x2d/0x36()
      1 WARNING: CPU: 0 PID: 130 at /c/wfg/linux-drm/drivers/tty/tty_io.c:1411 tty_open+0x215/0x42b()
      1 WARNING: CPU: 0 PID: 128 at /c/wfg/linux-drm/lib/debugobjects.c:260 debug_print_object+0x7c/0x8b()
      1 WARNING: CPU: 0 PID: 128 at /c/wfg/linux-drm/kernel/workqueue.c:458 work_fixup_activate+0x6a/0x6f()
      1 WARNING: CPU: 0 PID: 128 at /c/wfg/linux-drm/kernel/workqueue.c:1379 __queue_work+0x1a1/0x1ee()
      1 WARNING: CPU: 0 PID: 126 at /c/wfg/linux-drm/kernel/workqueue.c:591 set_work_data+0x33/0x50()
      1 Oops: 0010 [#2] PREEMPT SMP DEBUG_PAGEALLOC
      1 Oops: 0002 [#1] iled: NPRo suchE deEMPT SMP DEBUG_PAGEALLOC
      1 Oops: 0002 [#1] grPRep: /Eproc/fileEMPT SMP DEBUG_PAGEALLOC
      1 Oops: 0002 [#1] bPooRtlEogEd.M
      1 Oops: 0002 [#1] PRe EorE dMirPecTto ry
      1 Oops: 0002 [#1] PREmount:E moMPTunt ing SMP DEBUG_PAGEALLOC
      1 Oops: 0002 [#1] PREEMPT nSe M15P:  /triniDtyE:BUG_PAGEALLOC
      1 Oops: 0002 [#1] PREEMPT SmoMunPt:  mountDinEg BUG_PAGEALLOC
      1 Oops: 0002 [#1] PREEMPT SMP DEBUG_PAGEALLOCs/
      1 Oops: 0002 [#1] PREEMPT SMP DEBUG_PAGEALLOCm
      1 Oops: 0002 [#1] PREEMPT SMP DEBUG_PAGEALLOCgrep: /proc/file
      1 Oops: 0002 [#1] PREEMPT SMP 
      1 Oops: 0002 [#1] PREEMPT 
      1 Oops: 0002 [#1] CPonRfiEguEriMngP nTet wSMP DEBUG_PAGEALLOC
      1 Oops: 0002 [#1] /PbiRn/EshE: M/pProTc/ sSMP eDlfE/fBd/U9:G N_o PsuAcGEALLOC
      1 Oops: 0000 [#4] PREEMPT SMP DEBUG_PAGEALLOC
      1 Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009
      1 BUG: unable to handle kernel paging request at ffffffffe7e9eb38
      1 BUG: unable to handle kernel paging request at ffff880006db9808
      1 BUG: unable to handle kernel paging request at ffff880006db9800
      1 BUG: unable to handle kernel paging request at ffff880006db3008
      1 BUG: unable to handle kernel paging request at ffff880006db3000
      1 BUG: unable to handle kernel paging request at 00002939a1ff0088
      1 BUG: unable to handle kernel paging request at 0000200000000080
      1 BUG: unable to handle kernel paging request at 00000000c1dcacfe
      1 BUG: unable to handle kernel paging request at 000000007fffffff
      1 BUG: unable to handle kernel paging request at 0000000003ffffc0
      1 BUG: unable to handle kernel gNULL pointer dereference at 0000000000000008
      1 BUG: unable to handle kernel NULproc on /proc Lfa pointer dereference at 0000000000000008
      1 BUG: unable to handle kernel NULgrep: /proc/cmdline: No such file or directory
      1 BUG: unable to handle kernel NULRuLnni ngp poositinnstter  /detec/rrpem-fpoestrinensctse/100.. .at 00
      1 BUG: unable to handle kernel NULL pointer ereference
      1 BUG: unable to handle kernel NULL pointer derefrence at 0000000000000008
      1 BUG: unable to handle kernel NULL pointer dereferenceStarting Bootlog at 0000000000000008
      1 BUG: unable to handle kernel NULL pointer dereference atmo 00unt: 0moun00ti0ng0 00pro0c on /proc fa00ile000d: No such de8
      1 BUG: unable to handle kernel NULL pointer dereference at moun0000t: 0moun0ting0 000000p0roc 0on /8proc
      1 BUG: unable to handle kernel NULL pointer dereference at gr0e0p:0 0/p0ro00000c0/cm0dl0008in
      1 BUG: unable to handle kernel NULL pointer dereference at 0000000000000017
      1 BUG: unable to handle kernel NULL pointer dereference at 0000000000000010
      1 BUG: unable to handle kernel NULL pointer dereference at 0000000000000004
      1 BUG: unable to handle kernel NULL pointer dereference a/bt in0000/sh: 00/p0ro0c/0000s000elf/fd/9:8
      1 BUG: unable to handle kernel NULL pointer dereferce at 0000000000000008
      1 BUG: unable to handle kernel NULL pointer derefence at 0000000000000008
      1 BUG: unable to handle kernel NULL pointe dereference at 0000000000000008
      1 BUG: unable to handle kernel NULL poiner dereference at 0000000000000008
      1 BUG: unable to handle kernel NULL p
      1 BUG: unable to handle kernel NUL/etc/rcS.d/S00fbLsetup : pointer lidne 3:e reference at 0000000000000008
      1 BUG: unable to handle kernel NUL/biLn/s ph: /poiroc/nsterel f/fd/9: dNo sucereh file feror edirectnorcy
      1 BUG: unable to handle kernel NU/bin/LLsh: / procp/soelf/fdi/9: No sucnteh frile or dire ctdoryeref
      1 BUG: unable to handle kernel NU
      1 BUG: unable to handle kernel /kNerUneLl-Lte stpointer dereference at 0000000000000008
      1 BUG: unable to handle kernel -> 0:9
      1 BUG: spinlock lockup suspected on CPU#0, swapper/0/0
      1 BUG: scheduling while atomic: stty/188/0x10000002
      1 BUG: scheduling while atomic: sleep/130/0x00000002
      1 BUG: scheduling while atomic: sleep/129/0x10000002
      1 BUG: scheduling while atomic: sleep/129/0x00000002
      1 BUG: scheduling while atomic: reboot/221/0x10000002
      1 BUG: scheduling while atomic: reboot/134/0x10000002
      1 BUG: scheduling while atomic: rc/214/0x10000002
      1 BUG: scheduling while atomic: rc/213/0x10000002
      1 BUG: scheduling while atomic: rc.local/135/0x10000002
      1 BUG: Bad rss-counter state mm:ffff88000cab4d00 idx:1 val:2
      1 BUG: Bad rss-counter state mm:ffff88000caaf340 idx:1 val:2
      1 BUG: Bad rss-counter state mm:ffff88000ca33340 idx:1 val:2
      1 BUG: Bad rss-counter state mm:ffff88000ca1d980 idx:1 val:2
      1 BUG: Bad rss-counter state mm:ffff88000ca1b980 idx:1 val:2
      1 BUG: Bad rss-counter state mm:ffff88000c9e1980 idx:1 val:2
      1 BUG: Bad rss-counter state mm:ffff88000c9de080 idx:1 val:2
      1 BUG: Bad rss-counter state mm:ffff88000c9d06c0 idx:1 val:2
      1 BUG: Bad rss-counter state mm:ffff88000c9be6c0 idx:1 val:2

Sorry I should have did more analyzes before reporting it out. The Xen tree is
clean: 10000 good boots w/o a single bad dmesg. Which is also indicated by the below bisect log:

git bisect bad cf39c8e5352b # 18:34 727- Merge tag 'stable/for-linus-3.12-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
...

git bisect good 23b7eaf82207  # 03:19   5000+  hvc_xen: Remove unnecessary __GFP_ZERO from kzalloc
git bisect good 3398d252a4da  # 13:35  10000+  Merge tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux
git bisect good 23b7eaf82207  # 14:55  10000+  hvc_xen: Remove unnecessary __GFP_ZERO from kzalloc
git bisect  bad 14951f22f1cc  # 14:55      0-  Revert "perf symbols: Demangle cloned functions"
git bisect  bad e62063d69911  # 15:28   1444-  Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs
git bisect  bad a0cf1abc25ac  # 15:28      0-  Add linux-next specific files for 20130927
git bisect  bad b31801966611  # 15:56    728-  Merge branch 'tools/kvm'

Where the 5000+/10000+ etc. are the number of boots before claiming the kernel GOOD; the 727-/0-/728- are the number of boots (minus 1) before finding the bug message in dmesg.

In this bisect, the bug message is "double fault:" and the bisect works in this way:

loop {
if grep "double fault:" dmesg; then
report FAILURE
else if booted N times
report GOOD and break
}

I'll check and improve the bisect script to verify the bisect result for working with this situation.

Thanks,
Fengguang

#81 lore raw
In reply to Fengguang Wu
Quoted 3 lines · Fengguang Wu

I got the below dmesg and the first bad commit is commit cf39c8e5352b:
Merge tag 'stable/for-linus-3.12-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip

Ugh. How reliable is the double fault? Because bisecting it to the merge that didn't even have any conflicts in it as far as I can remember means that there's something really subtle going on wrt some semantic conflict or other. Or, alternatively, it means that the bisect failed because the double fault isn't 100% reliable..

Anyway, the stack is crap when the original fault happens at "boot_tvec_bases+0x1fe", and that causes the double fault debug code to take *another* fault, which means that it doesn't even show the right code sequence. Too bad. So ignore the latter part of the oops, but the top part looks valid:

Quoted 6 lines
[    4.136137] double fault: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
[    4.137521] CPU: 0 PID: 132 Comm: bootlogd Not tainted 3.12.0-rc2-00153-g14951f2 #129
[    4.139156] task: ffff88000c9a6580 ti: ffff88000c9ba000 task.ti: ffff88000c9ba000
[    4.140042] RIP: 0010:[<ffffffff81f31c7e>]  [<ffffffff81f31c7e>] boot_tvec_bases+0x1fe/0x2080
[    4.140042] RSP: 0018:0000000088000cd8  EFLAGS: 00010212
[    4.140042] RAX: 000000000000004f RBX: 0000000000000100 RCX: 0000000000000000
Quoted 8 lines
[    4.140042] RDX: 0000000000000f1e RSI: ffffffff81f746a8 RDI: ffffffff81f31c48
[    4.140042] RBP: ffff88000f003ee0 R08: 0000000000000000 R09: 0000000000000000
[    4.140042] R10: 0000000000000001 R11: ffff88000f00a000 R12: ffff88000c9bbfd8
[    4.140042] R13: ffffffff81f31c48 R14: ffffffff81f31c48 R15: ffffffff81f31c48
[    4.140042] FS:  00007fb1f9662700(0000) GS:ffff88000f000000(0000) knlGS:0000000000000000
[    4.140042] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    4.140042] CR2: 0000000088000cc8 CR3: 000000000c9cd000 CR4: 00000000000006b0
[    4.140042] Stack:

<boom, it crashes again here>

but it has jumped into a data section and is executing random data as code, and there is no sign of where it jumped *from*, since the random code clearly corrupted the stack - resulting in the double fault in the first place.

So the oops is almost entirely useless as a debug aid in this situation. I'm almost hoping that your bisect was wrong, and you could try to see if you could do that again..

Linus