manual: update review process and patchwork
PATCH v2 1/1 manual: update review process and patchwork
Adding more documentaiton based on discussion from the mailing list in regards the buildroot review process and how patchworks can be used to pull in patches for testing purposes.
Mailing list discussion:
http://lists.busybox.net/pipermail/buildroot/2013-September/078170.html
---
v1 -> v2
* Updated all references to patchwork to be Patchwork or Buildroot's Patchwork instead of a few misspellings (suggested by Thomas Petazzoni)
* Added clarification that patchwork main use is for the Buildroot maintainer (suggested by Thomas Petazzoni)
--- docs/manual/contribute.txt | 12 +++++++++++- docs/manual/get-involved.txt | 38 +++++++++++++++++++++++++++++++++++--- 2 files changed, 46 insertions(+), 4 deletions(-)
docs/manual/contribute.txt +11 -1
@@ -132,9 +132,15 @@ $ git format-patch --subject-prefix "PATCH v4" \ Reviewing/Testing patches ------------------------- +The review process for new patches is done over the mailing list. Once +a patch is submitted to the mailing list, other developers will provide +feedback to the patch via emails sent through the mailing list. + In the review process, do not hesitate to respond to patch submissions for remarks, suggestions or anything that will help everyone to -understand the patches and make them better. +understand the patches and make them better. Please use internet +style replies in plain text emails when responding to patch +submissions. Some tags are used to help following the state of any patch posted on the mailing-list:
@@ -144,6 +150,10 @@ Acked-by:: Indicates that the patch can be committed. Tested-by:: Indicates that the patch has been tested. It is useful but not necessary to add a comment about what has been tested. +Buildroot's Patchwork website can be used to pull in patches for testing +purposes. Please see xref:apply-patches-patchwork[] for more +information on using Buildroot's Patchwork website to apply patches. + Autobuild ---------
docs/manual/get-involved.txt +35 -3
@@ -55,11 +55,43 @@ using a code sharing website. Patchwork --------- -The Buildroot patch management interface is at +Patchwork is a web-based patch tracking system designed to facilitate +the contribution and management of contributions to an open-source +project. Patches that have been sent to a mailing list are \'caught' by +the system, and appear on a web page. Any comments posted that +reference the patch are appended to the patch page too. For more +information on Patchwork see +http://jk.ozlabs.org/projects/patchwork[]. + +Buildroot's Patchwork website is mainly for use by the Buildroot's +maintainer to ensure patches aren't missed. The website however, +exposes patches and their corresponding review comments in a clean +and concise web interface. + +The Buildroot patch management interface is available at http://patchwork.buildroot.org[]. -All patches and comments sent through the mailing list are -automatically indexed in http://patchwork.buildroot.org[patchwork]. +[[apply-patches-patchwork]] +Applying Patches from Patchwork +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Buildroot's Patchwork website main use for a developer is for pulling +in patches into their local git repository for testing purposes. + +When browsing patches in the patchwork management interface, a +mbox+ +link is provided at the top of the page. Copy this link address and +run the following commands: + +--------------------- +$ git checkout -b <test-branch-name> +$ wget -O - <mbox-url> | git am +--------------------- + +Another option for applying patches is to create a bundle. A bundle is +a set of patches that you can group together using the patchwork +interface. Once the bundle is created and the bundle is made public, +you can copy the +mbox+ link for the bundle and apply the bundle +using the above commands. [[bugtracker]] Bugtracker
Signature · 1 line
1.7.1
PATCH v2 1/1 manual: update review process and patchwork
Hi Ryan,
Quoted 81 lines · Ryan Barnett
Adding more documentaiton based on discussion from the mailing list in regards the buildroot review process and how patchworks can be used to pull in patches for testing purposes.
Mailing list discussion:
http://lists.busybox.net/pipermail/buildroot/2013-September/078170.htmlSigned-off-by Ryan Barnett <[email protected]>---
v1 -> v2
* Updated all references to patchwork to be Patchwork or Buildroot's Patchwork instead of a few misspellings (suggested by Thomas Petazzoni)
* Added clarification that patchwork main use is for the Buildroot maintainer (suggested by Thomas Petazzoni)Signed-off-by Ryan Barnett <[email protected]>--- docs/manual/contribute.txt | 12 +++++++++++- docs/manual/get-involved.txt | 38 +++++++++++++++++++++++++++++++++++--- 2 files changed, 46 insertions(+), 4 deletions(-)docs/manual/contribute.txt +11
-1@@ -132,9 +132,15 @@ $ git format-patch --subject-prefix "PATCH v4" \ Reviewing/Testing patches ------------------------- +The review process for new patches is done over the mailing list. Once +a patch is submitted to the mailing list, other developers will provide +feedback to the patch via emails sent through the mailing list. + In the review process, do not hesitate to respond to patch submissions for remarks, suggestions or anything that will help everyone to -understand the patches and make them better. +understand the patches and make them better. Please use internet +style replies in plain text emails when responding to patch +submissions. Some tags are used to help following the state of any patch posted on the mailing-list:@@ -144,6 +150,10 @@ Acked-by:: Indicates that the patch can be committed. Tested-by:: Indicates that the patch has been tested. It is useful but not necessary to add a comment about what has been tested. +Buildroot's Patchwork website can be used to pull in patches for testing +purposes. Please see xref:apply-patches-patchwork[] for more +information on using Buildroot's Patchwork website to apply patches. + Autobuild ---------docs/manual/get-involved.txt +14
-1@@ -55,11 +55,43 @@ using a code sharing website. Patchwork --------- -The Buildroot patch management interface is at +Patchwork is a web-based patch tracking system designed to facilitate +the contribution and management of contributions to an open-source +project. Patches that have been sent to a mailing list are \'caught' by +the system, and appear on a web page. Any comments posted that +reference the patch are appended to the patch page too. For more +information on Patchwork see +http://jk.ozlabs.org/projects/patchwork[]. + +Buildroot's Patchwork website is mainly for use by the Buildroot's +maintainer to ensure patches aren't missed. The website however, +exposes patches and their corresponding review comments in a clean +and concise web interface. + +The Buildroot patch management interface is available at http://patchwork.buildroot.org[].
docs/manual/get-involved.txt using a code sharing website. · line 81
Quoted 10 lines
docs/manual/get-involved.txt +8
-2-All patches and comments sent through the mailing list are -automatically indexed in http://patchwork.buildroot.org[patchwork]. +[[apply-patches-patchwork]] +Applying Patches from Patchwork +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Buildroot's Patchwork website main use for a developer is for pulling +in patches into their local git repository for testing purposes. + +When browsing patches in the patchwork management interface, a +mbox+
shouldn't this be 'an mbox' because you pronounce mbox as embox ?
Best regards,
Thomas
PATCH v2 1/1 manual: update review process and patchwork
Thomas D.,
Thomas De Schampheleire <[email protected]> wrote on 10/09/2013 01:50:57 AM:
Quoted 10 lines
Hi Ryan,
Quoted 6 lines · Ryan Barnett
Adding more documentaiton based on discussion from the mailing list in regards the buildroot review process and how patchworks can be used to pull in patches for testing purposes.
Mailing list discussion:
http://lists.busybox.net/pipermail/buildroot/2013-September/078170.html
Quoted 12 lines
Quoted 12 lines
Signed-off-by Ryan Barnett <[email protected]>---
v1 -> v2
* Updated all references to patchwork to be Patchwork or Buildroot's Patchwork instead of a few misspellings (suggested by Thomas Petazzoni)
* Added clarification that patchwork main use is for the Buildroot maintainer (suggested by Thomas Petazzoni)
Quoted 4 lines
Quoted 4 lines
Signed-off-by Ryan Barnett <[email protected]>--- docs/manual/contribute.txt | 12 +++++++++++- docs/manual/get-involved.txt | 38
+++++++++++++++++++++++++++++++++++---
Quoted 11 lines
docs/manual/contribute.txt $ git format-patch --subject-prefix "PATCH v4" \ · line 135
Quoted 11 lines
2 files changed, 46 insertions(+), 4 deletions(-)docs/manual/contribute.txt +1
-0@@ -132,9 +132,15 @@ $ git format-patch --subject-prefix "PATCH v4" \ Reviewing/Testing patches ------------------------- +The review process for new patches is done over the mailing list.
Once
Quoted 1 line
docs/manual/contribute.txt $ git format-patch --subject-prefix "PATCH v4" \ · line 136
Quoted 1 line
docs/manual/contribute.txt +1
-0+a patch is submitted to the mailing list, other developers will
provide
Quoted 3 lines
docs/manual/contribute.txt $ git format-patch --subject-prefix "PATCH v4" \
Quoted 3 lines
docs/manual/contribute.txt +2
-0+feedback to the patch via emails sent through the mailing list. + In the review process, do not hesitate to respond to patch
submissions
Quoted 9 lines
docs/manual/contribute.txt Acked-by:: Indicates that the patch can be
Quoted 9 lines
docs/manual/contribute.txt +3
-1for remarks, suggestions or anything that will help everyone to -understand the patches and make them better. +understand the patches and make them better. Please use internet +style replies in plain text emails when responding to patch +submissions. Some tags are used to help following the state of any patch posted on the mailing-list:@@ -144,6 +150,10 @@ Acked-by:: Indicates that the patch can be
committed.
Quoted 4 lines
docs/manual/contribute.txt Acked-by:: Indicates that the patch can be committed.
Quoted 4 lines
docs/manual/contribute.txt +1
-0Tested-by:: Indicates that the patch has been tested. It is useful but not necessary to add a comment about what has been tested. +Buildroot's Patchwork website can be used to pull in patches for
testing
Quoted 7 lines
Review
Quoted 7 lines
docs/manual/contribute.txt +3
-0+purposes. Please see xref:apply-patches-patchwork[] for more +information on using Buildroot's Patchwork website to apply patches. + Autobuild ---------(quoted diff) +0
-0
b/docs/manual/get-involved.txt
Quoted 11 lines
docs/manual/get-involved.txt using a code sharing website. · line 60
Quoted 11 lines
index 8515d34..173b0f4 100644
docs/manual/get-involved.txt +3
-1@@ -55,11 +55,43 @@ using a code sharing website. Patchwork --------- -The Buildroot patch management interface is at +Patchwork is a web-based patch tracking system designed to facilitate +the contribution and management of contributions to an open-source +project. Patches that have been sent to a mailing list are \'caught'
by
Quoted 13 lines
Quoted 13 lines
docs/manual/get-involved.txt +11
-0+the system, and appear on a web page. Any comments posted that +reference the patch are appended to the patch page too. For more +information on Patchwork see +http://jk.ozlabs.org/projects/patchwork[]. + +Buildroot's Patchwork website is mainly for use by the Buildroot's +maintainer to ensure patches aren't missed. The website however, +exposes patches and their corresponding review comments in a clean +and concise web interface. + +The Buildroot patch management interface is available at http://patchwork.buildroot.org[].
Quoted 12 lines
docs/manual/get-involved.txt using a code sharing website. · line 81
Quoted 10 lines
docs/manual/get-involved.txt +8
-2-All patches and comments sent through the mailing list are -automatically indexed in http://patchwork.buildroot.org[patchwork]. +[[apply-patches-patchwork]] +Applying Patches from Patchwork +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Buildroot's Patchwork website main use for a developer is for pulling +in patches into their local git repository for testing purposes. + +When browsing patches in the patchwork management interface, a +mbox+shouldn't this be 'an mbox' because you pronounce mbox as embox ?
I was on the fence on this one too and with this question you are now testing my grammar education from primary school :) I did do a bit of google research on this and have come to the conclusion that I used 'a' correctly in this instance. Please see this website which is consider in the US to be a reputable source for English writing:
https://owl.english.purdue.edu/owl/resource/591/01
Quoted 2 lines
Best regards,
Thomas
Thanks,
-Ryan
PATCH v2 1/1 manual: update review process and patchwork
Hi Ryan,
Quoted 5 lines · Ryan Barnett
Quoted 4 lines
Review
Quoted 2 lines
(quoted diff) +2
-0+ +When browsing patches in the patchwork management interface, a +mbox+shouldn't this be 'an mbox' because you pronounce mbox as embox ?
Quoted 7 lines
I was on the fence on this one too and with this question you are now testing my grammar education from primary school :) I did do a bit of google research on this and have come to the conclusion that I used 'a' correctly in this instance. Please see this website which is consider in the US to be a reputable source for English writing:
It seems we differ in the conclusion after reading the link you provided :) Here is the excerpt that makes me conclude it should be 'an':
-----
The choice of article is actually based upon the phonetic (sound) quality of the first letter in a word, not on the orthographic (written) representation of the letter. If the first letter makes a vowel-type sound, you use "an"; if the first letter would make a consonant-type sound, you use "a."
-----
Since mbox is short for mailbox, the m is actually an acronym. Hence we pronounce it as 'embox' not 'mmmbox'. Do you agree on this or do you pronounce it differently?
So the phonetic quality of the first letter is 'e', a vowel-type sound, and hence requires the 'an' article.
The link you showed does not explicitly describe the situation in case of acronym, though.
I believe it is the same as:
an MBA program
an NBA basketball player
an NSA employee
an nvidia driver
Although less reputable than the link you provided, the following sites back me up on this:
http://en.wikipedia.org/wiki/English_articles#Distinction_between_a_and_an
http://editingandwritingservices.com/using-articles-with-abbreviations/
http://www.scribendi.com/advice/the_correct_use_of_acronyms.en.html
Best regards,
Thomas
PATCH v2 1/1 manual: update review process and patchwork
Thomas D.,
Thomas De Schampheleire <[email protected]> wrote on 10/09/2013 08:24:43 AM:
Quoted 6 lines
Hi Ryan,
Quoted 2 lines · Ryan Barnett
Quoted 2 lines
Review
Quoted 2 lines
(quoted diff) +2
-0+ +When browsing patches in the patchwork management interface, a
+mbox+
Quoted 6 lines
Quoted 6 lines
Quoted 2 lines
shouldn't this be 'an mbox' because you pronounce mbox as embox ?
I was on the fence on this one too and with this question you are now testing my grammar education from primary school :) I did do a bit of google research on this and have come to the conclusion that I used
'a'
Quoted 6 lines
Quoted 4 lines
correctly in this instance. Please see this website which is consider in the US to be a reputable source for English writing:
It seems we differ in the conclusion after reading the link you provided
:)
Quoted 1 line
Here is the excerpt that makes me conclude it should be 'an':
I agree now with you and will fix. See below for more comments.
Quoted 11 lines
-----
The choice of article is actually based upon the phonetic (sound) quality of the first letter in a word, not on the orthographic (written) representation of the letter. If the first letter makes a vowel-type sound, you use "an"; if the first letter would make a consonant-type sound, you use "a."
-----Since mbox is short for mailbox, the m is actually an acronym. Hence we pronounce it as 'embox' not 'mmmbox'. Do you agree on this or do you pronounce it differently?
I guess I wasn't thinking of it in terms of an acronym. With that case then I do agree with you that it should be 'an'. And to be clear, I do agree that it is an acronym.
Native English Speaker: 0
English as Second Language Speaker: 1
It's been a long time since I've had to worry about an English grammar corner like this . I guess I was just automatically fix minor mistakes like this in my head and my spell/grammar checker doesn't call me out.
Quoted 10 lines
So the phonetic quality of the first letter is 'e', a vowel-type sound, and hence requires the 'an' article.
The link you showed does not explicitly describe the situation in case of acronym, though.I believe it is the same as:
an MBA program
an NBA basketball player
an NSA employee
an nvidia driver
Good examples. Thank you for spending the time on this minor mistake and in the future I will try to watch this.
Quoted 3 lines
Although less reputable than the link you provided, the following sites back me up on this:
http://en.wikipedia.org/wiki/English_articles#Distinction_between_a_and_an
Quoted 5 lines
http://editingandwritingservices.com/using-articles-with-abbreviations/
http://www.scribendi.com/advice/the_correct_use_of_acronyms.en.htmlBest regards,
Thomas
Thanks,
-Ryan
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20131009/ca5b1fc8/attachment.html>
PATCH v2 1/1 manual: update review process and patchwork
In reply to Ryan BarnettDear Ryan Barnett,
Quoted 8 lines · Ryan Barnett
Adding more documentaiton based on discussion from the mailing list in regards the buildroot review process and how patchworks can be used to pull in patches for testing purposes.
Mailing list discussion:
http://lists.busybox.net/pipermail/buildroot/2013-September/078170.htmlSigned-off-by Ryan Barnett <[email protected]>
Signature · 3 lines
Thomas Petazzoni, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com
PATCH v2 1/1 manual: update review process and patchwork
In reply to Ryan BarnettHi Ryan,
2013/10/9 Ryan Barnett <[email protected]>
Quoted 77 lines
Adding more documentaiton based on discussion from the mailing list in regards the buildroot review process and how patchworks can be used to pull in patches for testing purposes.
Mailing list discussion:
http://lists.busybox.net/pipermail/buildroot/2013-September/078170.htmlSigned-off-by Ryan Barnett <[email protected]>---
v1 -> v2
* Updated all references to patchwork to be Patchwork or Buildroot's Patchwork instead of a few misspellings (suggested by Thomas Petazzoni)
* Added clarification that patchwork main use is for the Buildroot maintainer (suggested by Thomas Petazzoni)Signed-off-by Ryan Barnett <[email protected]>--- docs/manual/contribute.txt | 12 +++++++++++- docs/manual/get-involved.txt | 38 +++++++++++++++++++++++++++++++++++--- 2 files changed, 46 insertions(+), 4 deletions(-)docs/manual/contribute.txt +11
-1@@ -132,9 +132,15 @@ $ git format-patch --subject-prefix "PATCH v4" \ Reviewing/Testing patches ------------------------- +The review process for new patches is done over the mailing list. Once +a patch is submitted to the mailing list, other developers will provide +feedback to the patch via emails sent through the mailing list. + In the review process, do not hesitate to respond to patch submissions for remarks, suggestions or anything that will help everyone to -understand the patches and make them better. +understand the patches and make them better. Please use internet +style replies in plain text emails when responding to patch +submissions. Some tags are used to help following the state of any patch posted on the mailing-list:@@ -144,6 +150,10 @@ Acked-by:: Indicates that the patch can be committed. Tested-by:: Indicates that the patch has been tested. It is useful but not necessary to add a comment about what has been tested. +Buildroot's Patchwork website can be used to pull in patches for testing +purposes. Please see xref:apply-patches-patchwork[] for more +information on using Buildroot's Patchwork website to apply patches. + Autobuild ---------docs/manual/get-involved.txt +12
-1@@ -55,11 +55,43 @@ using a code sharing website. Patchwork --------- -The Buildroot patch management interface is at +Patchwork is a web-based patch tracking system designed to facilitate +the contribution and management of contributions to an open-source +project. Patches that have been sent to a mailing list are \'caught' by +the system, and appear on a web page. Any comments posted that +reference the patch are appended to the patch page too. For more +information on Patchwork see +http://jk.ozlabs.org/projects/patchwork[]. + +Buildroot's Patchwork website is mainly for use by the Buildroot's +maintainer to ensure patches aren't missed. The website however, +exposes patches and their corresponding review comments in a clean +and concise web interface.
docs/manual/get-involved.txt using a code sharing website. · line 77
Quoted 10 lines
docs/manual/get-involved.txt +5
-2+ +The Buildroot patch management interface is available at http://patchwork.buildroot.org[]. -All patches and comments sent through the mailing list are -automatically indexed in http://patchwork.buildroot.org[patchwork]. +[[apply-patches-patchwork]] +Applying Patches from Patchwork +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Not sure the capital "P" is needed for "Patches".
Quoted 10 lines
docs/manual/get-involved.txt +8
-0+ +Buildroot's Patchwork website main use for a developer is for pulling +in patches into their local git repository for testing purposes. + +When browsing patches in the patchwork management interface, a +mbox+ +link is provided at the top of the page. Copy this link address and +run the following commands: + +---------------------
docs/manual/get-involved.txt using a code sharing website. · line 95
Quoted 10 lines
docs/manual/get-involved.txt +9
-0+$ git checkout -b <test-branch-name> +$ wget -O - <mbox-url> | git am +--------------------- + +Another option for applying patches is to create a bundle. A bundle is +a set of patches that you can group together using the patchwork +interface. Once the bundle is created and the bundle is made public, +you can copy the +mbox+ link for the bundle and apply the bundle +using the above commands.
Otherwise, you have my ack:
Regards,
Signature · 4 lines
Samuel -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20131009/b80d43b0/attachment-0001.html>