rt2x00: rt2800lib: remove duplicate rf_vals for RF3053

We already have rf_vals_3x with same values. Hence rf_vals_3053 is removed in this patch.

Signed-off-by Kevin Lo <[email protected]>

Acked-by Paul Menzel <[email protected]>

We already have rf_vals_3x with same values. Hence rf_vals_3053 is removed in this patch.

Signed-off-by Kevin Lo <[email protected]>

Acked-by Paul Menzel <[email protected]>

---
Changes since v1:
- update comment of rf_vals_3x to indicate that it also supports RF3053
- add Paul's Acked-by tag
---

drivers/net/wireless/rt2x00/rt2800lib.c +1 -67

index 25aaa5e..78ce749 100644
@@ -7224,7 +7224,7 @@ static const struct rf_channel rf_vals[] = {
 
 /*
  * RF value list for rt3xxx
- * Supports: 2.4 GHz (all) & 5.2 GHz (RF3052)
+ * Supports: 2.4 GHz (all) & 5.2 GHz (RF3052 & RF3053)
  */
 static const struct rf_channel rf_vals_3x[] = {
        {1,  241, 2, 2 },

@@ -7420,72 +7420,6 @@ static const struct rf_channel
 rf_vals_5592_xtal40[] = {
        {196, 83, 0, 12, 1},
 };
 
-static const struct rf_channel rf_vals_3053[] = {
-       /* Channel, N, R, K */
-       {1, 241, 2, 2},
-       {2, 241, 2, 7},
-       {3, 242, 2, 2},
-       {4, 242, 2, 7},
-       {5, 243, 2, 2},
-       {6, 243, 2, 7},
-       {7, 244, 2, 2},
-       {8, 244, 2, 7},
-       {9, 245, 2, 2},
-       {10, 245, 2, 7},
-       {11, 246, 2, 2},
-       {12, 246, 2, 7},
-       {13, 247, 2, 2},
-       {14, 248, 2, 4},
-
-       {36, 0x56, 0, 4},
-       {38, 0x56, 0, 6},
-       {40, 0x56, 0, 8},
-       {44, 0x57, 0, 0},
-       {46, 0x57, 0, 2},
-       {48, 0x57, 0, 4},
-       {52, 0x57, 0, 8},
-       {54, 0x57, 0, 10},
-       {56, 0x58, 0, 0},
-       {60, 0x58, 0, 4},
-       {62, 0x58, 0, 6},
-       {64, 0x58, 0, 8},
-
-       {100, 0x5B, 0, 8},
-       {102, 0x5B, 0, 10},
-       {104, 0x5C, 0, 0},
-       {108, 0x5C, 0, 4},
-       {110, 0x5C, 0, 6},
-       {112, 0x5C, 0, 8},
-
-       /* NOTE: Channel 114 has been removed intentionally.
-        * The EEPROM contains no TX power values for that,
-        * and it is disabled in the vendor driver as well.
-        */
-
-       {116, 0x5D, 0, 0},
-       {118, 0x5D, 0, 2},
-       {120, 0x5D, 0, 4},
-       {124, 0x5D, 0, 8},
-       {126, 0x5D, 0, 10},
-       {128, 0x5E, 0, 0},
-       {132, 0x5E, 0, 4},
-       {134, 0x5E, 0, 6},
-       {136, 0x5E, 0, 8},
-       {140, 0x5F, 0, 0},
-
-       {149, 0x5F, 0, 9},
-       {151, 0x5F, 0, 11},
-       {153, 0x60, 0, 1},
-       {157, 0x60, 0, 5},
-       {159, 0x60, 0, 7},
-       {161, 0x60, 0, 9},
-       {165, 0x61, 0, 1},
-       {167, 0x61, 0, 3},
-       {169, 0x61, 0, 5},
-       {171, 0x61, 0, 7},
-       {173, 0x61, 0, 9},
-};
-
 static int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 {

        struct hw_mode_spec *spec = &rt2x00dev->spec;

drivers/net/wireless/rt2x00/rt2800lib.c +2 -5

@@ -7575,14 +7509,11 @@ static int rt2800_probe_hw_mode(struct
 rt2x00_dev *rt2x00dev)
                   rt2x00_rf(rt2x00dev, RF5392)) {
                spec->num_channels = 14;
                spec->channels = rf_vals_3x;
-       } else if (rt2x00_rf(rt2x00dev, RF3052)) {
+       } else if (rt2x00_rf(rt2x00dev, RF3052) ||
+                  rt2x00_rf(rt2x00dev, RF3053)) {
                spec->supported_bands |= SUPPORT_BAND_5GHZ;
                spec->num_channels = ARRAY_SIZE(rf_vals_3x);
                spec->channels = rf_vals_3x;
-       } else if (rt2x00_rf(rt2x00dev, RF3053)) {
-               spec->supported_bands |= SUPPORT_BAND_5GHZ;
-               spec->num_channels = ARRAY_SIZE(rf_vals_3053);
-               spec->channels = rf_vals_3053;
        } else if (rt2x00_rf(rt2x00dev, RF5592)) {
                spec->supported_bands |= SUPPORT_BAND_5GHZ;