Skip to contentSkip to conversation

Possible issue when supported distros update their GNU tar package to version 1.27

DISCUSSION Yannis Damigos 2 participants 2 messages Oct 11, 2013

lore
Share & tools
lore
#0 lore raw

Hi everyone,

I work on Archlinux (64bit) and build a beagleboard image. Build Configuration:

BB_VERSION        = "1.20.0"
BUILD_SYS         = "x86_64-linux"
NATIVELSBSTRING   = "Arch-Linux"
TARGET_SYS        = "arm-poky-linux-gnueabi"
MACHINE           = "beagleboard"
DISTRO            = "poky"
DISTRO_VERSION    = "1.5"
TUNE_FEATURES     = "armv7a vfp neon"
TARGET_FPU        = "vfp-neon"

meta
meta-yocto
meta-yocto-bsp = "master:102bf5e0f640fe85068452a42b85077f1c81e0c9"

The build process stops at the task "quilt-native_0.60.bb, do_populate_sysroot" with the following error:
tar: --same-order option cannot be used with -c
Try 'tar --help' or 'tar --usage' for more information.
tar: This does not look like a tar archive
tar: Exiting with failure status due to previous errors

Searching around I found out that the problem was found at the file meta/classes/staging.bbclass at line 16:

    tar -cf - -C "$src" -ps . | tar -xf - -C "$dest"

The issue comes up if user's distro is using GNU tar version 1.27 Here is a link to the tar patch that causing the problem:
http://git.savannah.gnu.org/cgit/tar.git/commit/?id=74ce228f6df956e6b7be9fd4f993bada4b7ea645

If I downgrade the tar package to version 1.26, the build ends with success.

Here is a list with all the files that should be updated/patched
./meta/lib/oe/path.py: cmd = 'tar -cf - -C %s -ps . | tar -xf - -C %s' % (src, dst)
./meta/lib/oe/path.py: cmd = 'cd %s; find . -type d -print | tar -cf - -C %s -ps --files-from - | tar -xf - -C %s' % (src, src, dst) ./meta/classes/package.bbclass: cmd = 'tar -cf - -C %s -ps . | tar -xf - -C %s' % (dest, dvar) ./meta/classes/populate_sdk_deb.bbclass: tar -cf - -C ${STAGING_ETCDIR_NATIVE} -ps apt | tar -xf - -C ${target_rootfs}/etc ./meta/classes/libc-package.bbclass: tar -cf - -C ${LOCALETREESRC}${datadir} -ps i18n | tar -xf - -C $treedir/${datadir} ./meta/classes/libc-package.bbclass: tar -cf - -C ${LOCALETREESRC}${base_libdir} -ps . | tar -xf - -C $treedir/${base_libdir} ./meta/classes/libc-package.bbclass: tar -cf - -C ${STAGING_DIR_NATIVE}/${prefix_native}/${base_libdir} -ps libgcc_s.* | tar -xf - -C $treedir/${base_libdir} ./meta/classes/libc-package.bbclass: tar -cf - -C $treedir/$parent -ps $(basename ${localedir}) | tar -xf - -C ${PKGD}$parent ./meta/classes/staging.bbclass: tar -cf - -C "$src" -ps . | tar -xf - -C "$dest"
./bitbake/lib/bb/fetch2/__init__.py: #cmd = 'tar -cf - -C "%d" -ps . | tar -xf - -C "%s/%s/"' % (file, rootdir, destdir)

Best regards,
Yannis

#1 lore raw
Quoted 26 lines · Yannis Damigos

Hi everyone,

I work on Archlinux (64bit) and build a beagleboard image. Build Configuration:

BB_VERSION        = "1.20.0"
BUILD_SYS         = "x86_64-linux"
NATIVELSBSTRING   = "Arch-Linux"
TARGET_SYS        = "arm-poky-linux-gnueabi"
MACHINE           = "beagleboard"
DISTRO            = "poky"
DISTRO_VERSION    = "1.5"
TUNE_FEATURES     = "armv7a vfp neon"
TARGET_FPU        = "vfp-neon"

meta
meta-yocto
meta-yocto-bsp = "master:102bf5e0f640fe85068452a42b85077f1c81e0c9"

The build process stops at the task "quilt-native_0.60.bb, do_populate_sysroot" with the following error:
tar: --same-order option cannot be used with -c
Try 'tar --help' or 'tar --usage' for more information.
tar: This does not look like a tar archive
tar: Exiting with failure status due to previous errors

Searching around I found out that the problem was found at the file meta/classes/staging.bbclass at line 16:

Quoted 8 lines
     tar -cf - -C "$src" -ps . | tar -xf - -C "$dest"

The issue comes up if user's distro is using GNU tar version 1.27 Here is a link to the tar patch that causing the problem:
http://git.savannah.gnu.org/cgit/tar.git/commit/?id=74ce228f6df956e6b7be9fd4f993bada4b7ea645

If I downgrade the tar package to version 1.26, the build ends with success.

It's just a little too late to get this fixed for 1.5, we are in the middle of the final full pass test. But you can also use the Buildtools SDK Tarball.

This was created for systems that don't have the correct versions of Python, Git, Tar and Make. It can be downloaded from the following link:

https://www.yoctoproject.org/download/buildtools-sdk

Sau!

Quoted 20 lines

Here is a list with all the files that should be updated/patched
./meta/lib/oe/path.py: cmd = 'tar -cf - -C %s -ps . | tar -xf - -C %s' % (src, dst)
./meta/lib/oe/path.py: cmd = 'cd %s; find . -type d -print | tar -cf - -C %s -ps --files-from - | tar -xf - -C %s' % (src, src, dst) ./meta/classes/package.bbclass: cmd = 'tar -cf - -C %s -ps . | tar -xf - -C %s' % (dest, dvar) ./meta/classes/populate_sdk_deb.bbclass: tar -cf - -C ${STAGING_ETCDIR_NATIVE} -ps apt | tar -xf - -C ${target_rootfs}/etc ./meta/classes/libc-package.bbclass: tar -cf - -C ${LOCALETREESRC}${datadir} -ps i18n | tar -xf - -C $treedir/${datadir} ./meta/classes/libc-package.bbclass: tar -cf - -C ${LOCALETREESRC}${base_libdir} -ps . | tar -xf - -C $treedir/${base_libdir} ./meta/classes/libc-package.bbclass: tar -cf - -C ${STAGING_DIR_NATIVE}/${prefix_native}/${base_libdir} -ps libgcc_s.* | tar -xf - -C $treedir/${base_libdir} ./meta/classes/libc-package.bbclass: tar -cf - -C $treedir/$parent -ps $(basename ${localedir}) | tar -xf - -C ${PKGD}$parent ./meta/classes/staging.bbclass: tar -cf - -C "$src" -ps . | tar -xf - -C "$dest"
./bitbake/lib/bb/fetch2/__init__.py: #cmd = 'tar -cf - -C "%d" -ps . | tar -xf - -C "%s/%s/"' % (file, rootdir, destdir)

Best regards,
Yannis
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto