ARM: tegra: add GPIO controller to tegra124.dtsi
Subsystems (2)
PATCH 1/1 ARM: tegra: add GPIO controller to tegra124.dtsi
From: Stephen Warren <[email protected]>
The Tegra124 GPIO controller is identical to Tegra30, so copy the DT node from tegra30.dtsi to tegra124.dtsi.
--- arch/arm/boot/dts/tegra124.dtsi | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+)
arch/arm/boot/dts/tegra124.dtsi +18 -0
@@ -1,3 +1,4 @@ +#include <dt-bindings/gpio/tegra-gpio.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include "skeleton.dtsi"
@@ -29,6 +30,23 @@ <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; }; + gpio: gpio at 6000d000 { + compatible = "nvidia,tegra124-gpio", "nvidia,tegra30-gpio"; + reg = <0x6000d000 0x1000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; + }; + /* * There are two serial driver i.e. 8250 based simple serial * driver and APB DMA based serial driver for higher baudrate
Signature · 1 line
1.8.1.5
PATCH 1/1 ARM: tegra: add GPIO controller to tegra124.dtsi
Quoted 9 lines · Stephen Warren
From: Stephen Warren <[email protected]>
The Tegra124 GPIO controller is identical to Tegra30, so copy the DT node from
tegra30.dtsitotegra124.dtsi.Signed-off-by Stephen Warren <[email protected]>--- arch/arm/boot/dts/tegra124.dtsi | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+)
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20131015/1b43f422/attachment.sig>
Stephen Warren
AppliedPATCH 1/1 ARM: tegra: add GPIO controller to tegra124.dtsi
In reply to Stephen WarrenQuoted 4 lines · Stephen Warren
From: Stephen Warren <[email protected]>
The Tegra124 GPIO controller is identical to Tegra30, so copy the DT node from
tegra30.dtsitotegra124.dtsi.
Applied to Tegra's for-3.13/dt branch.