Skip to contentSkip to conversation

ARM: rockchip: Support for RK3188 and Radxa Rock board

PATCH New Heiko Stübner 1 participant 7 messages Oct 15, 2013

Subsystems (4)
lore
Share & tools
lore

Heiko Stübner

author maintainer
#0 lore raw

cover ARM: rockchip: Support for RK3188 and Radxa Rock board

Some slight reordering of stuff to facilitate the addition of support for the RK3188 SoC and the Radxa Rock board using it.

Heiko Stuebner (5):
ARM: rockchip: move shared dt properties to common source file
ARM: rockchip: enable arm-global-timer
ARM: rockchip: add dts for bqcurie2 tablet
ARM: rockchip: add support for rk3188 and Radxa Rock board
MAINTAINERS: Add maintainers entry for Rockchip SoCs

 MAINTAINERS                            |    7 +
 arch/arm/boot/dts/rk3066a-bqcurie2.dts |  109 ++++++++++++
 arch/arm/boot/dts/rk3066a.dtsi         |   98 +----------
 arch/arm/boot/dts/rk3188-clocks.dtsi   |  289 ++++++++++++++++++++++++++++++++
 arch/arm/boot/dts/rk3188-radxarock.dts |   80 +++++++++
 arch/arm/boot/dts/rk3188.dtsi          |  253 ++++++++++++++++++++++++++++
 arch/arm/boot/dts/rk3xxx.dtsi          |  124 ++++++++++++++
 arch/arm/mach-rockchip/Kconfig         |    2 +
 8 files changed, 865 insertions(+), 97 deletions(-)
 create mode 100644 arch/arm/boot/dts/rk3066a-bqcurie2.dts
 create mode 100644 arch/arm/boot/dts/rk3188-clocks.dtsi
 create mode 100644 arch/arm/boot/dts/rk3188-radxarock.dts
 create mode 100644 arch/arm/boot/dts/rk3188.dtsi
 create mode 100644 arch/arm/boot/dts/rk3xxx.dtsi
Signature · 1 line
1.7.10.4
author maintainer
#1 lore raw

PATCH 1/5 ARM: rockchip: move shared dt properties to common source file

The rk3188 SoC shares a lot of peripherals with the rk3066 SoC, but not all. Therefore move the common parts to a shared dtsi.

---
 arch/arm/boot/dts/rk3066a.dtsi |   98 +--------------------------------
 arch/arm/boot/dts/rk3xxx.dtsi  |  117 ++++++++++++++++++++++++++++++++++++++++
 2 files changed, 118 insertions(+), 97 deletions(-)
 create mode 100644 arch/arm/boot/dts/rk3xxx.dtsi
arch/arm/boot/dts/rk3066a.dtsi +1 -97
index 56bfac9..2218c64 100644
@@ -14,15 +14,12 @@
  */
 
 #include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/pinctrl/rockchip.h>
-#include "skeleton.dtsi"
+#include "rk3xxx.dtsi"
 #include "rk3066a-clocks.dtsi"
 
 / {
 	compatible = "rockchip,rk3066a";
-	interrupt-parent = <&gic>;
 
 	cpus {
 		#address-cells = <1>;
@@ -43,33 +40,6 @@
 	};
 
 	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		ranges;
-
-		gic: interrupt-controller at 1013d000 {
-			compatible = "arm,cortex-a9-gic";
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			reg = <0x1013d000 0x1000>,
-			      <0x1013c100 0x0100>;
-		};
-
-		L2: l2-cache-controller at 10138000 {
-			compatible = "arm,pl310-cache";
-			reg = <0x10138000 0x1000>;
-			cache-unified;
-			cache-level = <2>;
-		};
-
-		local-timer at 1013c600 {
-			compatible = "arm,cortex-a9-twd-timer";
-			reg = <0x1013c600 0x20>;
-			interrupts = <GIC_PPI 13 0x304>;
-			clocks = <&dummy150m>;
-		};
-
 		timer at 20038000 {
 			compatible = "snps,dw-apb-timer-osc";
 			reg = <0x20038000 0x100>;
@@ -320,71 +290,5 @@
 				};
 			};
 		};
-
-		uart0: serial at 10124000 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x10124000 0x400>;
-			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
-			reg-shift = <2>;
-			reg-io-width = <1>;
-			clocks = <&clk_gates1 8>;
-			status = "disabled";
-		};
-
-		uart1: serial at 10126000 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x10126000 0x400>;
-			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
-			reg-shift = <2>;
-			reg-io-width = <1>;
-			clocks = <&clk_gates1 10>;
-			status = "disabled";
-		};
-
-		uart2: serial at 20064000 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x20064000 0x400>;
-			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
-			reg-shift = <2>;
-			reg-io-width = <1>;
-			clocks = <&clk_gates1 12>;
-			status = "disabled";
-		};
-
-		uart3: serial at 20068000 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x20068000 0x400>;
-			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-			reg-shift = <2>;
-			reg-io-width = <1>;
-			clocks = <&clk_gates1 14>;
-			status = "disabled";
-		};
-
-		dwmmc at 10214000 {
-			compatible = "rockchip,rk2928-dw-mshc";
-			reg = <0x10214000 0x1000>;
-			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			clocks = <&clk_gates5 10>, <&clk_gates2 11>;
-			clock-names = "biu", "ciu";
-
-			status = "disabled";
-		};
-
-		dwmmc at 10218000 {
-			compatible = "rockchip,rk2928-dw-mshc";
-			reg = <0x10218000 0x1000>;
-			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			clocks = <&clk_gates5 11>, <&clk_gates2 13>;
-			clock-names = "biu", "ciu";
-
-			status = "disabled";
-		};
 	};
 };
arch/arm/boot/dts/rk3xxx.dtsi new file +117 -0

117 lines not on this page · raw message

Signature · 1 line
1.7.10.4
author maintainer
#2 lore raw

PATCH 2/5 ARM: rockchip: enable arm-global-timer

In reply to Heiko Stübner

RK2928 and RK3066 contain a dw_apb timer component, while the rk3188 uses a slightly similar but still different timer component. But all of them support the ARM-global-timer that got added as clocksource driver recently.

So enable support for it to get a working clocksource for rk3188.

---
 arch/arm/boot/dts/rk3xxx.dtsi  |    7 +++++++
 arch/arm/mach-rockchip/Kconfig |    2 ++
 2 files changed, 9 insertions(+)
arch/arm/boot/dts/rk3xxx.dtsi +7 -0
index fd3e476..0fcbcfd 100644
@@ -41,6 +41,13 @@
 			cache-level = <2>;
 		};
 
+		global-timer at 1013c200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0x1013c200 0x20>;
+			interrupts = <GIC_PPI 11 0x304>;
+			clocks = <&dummy150m>;
+		};
+
 		local-timer at 1013c600 {
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0x1013c600 0x20>;
arch/arm/mach-rockchip/Kconfig +2 -0
index 25ee12b..6fef464 100644
@@ -11,6 +11,8 @@ config ARCH_ROCKCHIP
 	select COMMON_CLK
 	select GENERIC_CLOCKEVENTS
 	select DW_APB_TIMER_OF
+	select ARM_GLOBAL_TIMER
+	select CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK
 	help
 	  Support for Rockchip's Cortex-A9 Single-to-Quad-Core-SoCs
 	  containing the RK2928, RK30xx and RK31xx series.
Signature · 1 line
1.7.10.4
author maintainer
#3 lore raw

PATCH 3/5 ARM: rockchip: add dts for bqcurie2 tablet

In reply to Heiko Stübner

The BQ Curie2 is a tablet based on the rk3066a SoC.

---
 arch/arm/boot/dts/rk3066a-bqcurie2.dts |  109 ++++++++++++++++++++++++++++++++
 1 file changed, 109 insertions(+)
 create mode 100644 arch/arm/boot/dts/rk3066a-bqcurie2.dts
arch/arm/boot/dts/rk3066a-bqcurie2.dts new file +109 -0
new file mode 100644
index 0000000..035df40
@@ -0,0 +1,109 @@
+/*
+ * Copyright (c) 2013 MundoReader S.L.
+ * Author: Heiko Stuebner <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+#include "rk3066a.dtsi"
+
+/ {
+	model = "bq Curie 2";
+
+	memory {
+		reg = <0x60000000 0x40000000>;
+	};
+
+	soc {
+		uart0: serial at 10124000 {
+			status = "okay";
+		};
+
+		uart1: serial at 10126000 {
+			status = "okay";
+		};
+
+		uart2: serial at 20064000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart2_xfer>;
+			status = "okay";
+		};
+
+		uart3: serial at 20068000 {
+			status = "okay";
+		};
+
+		vcc_sd0: fixed-regulator {
+			compatible = "regulator-fixed";
+			regulator-name = "sdmmc-supply";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			gpio = <&gpio3 7 GPIO_ACTIVE_LOW>;
+			startup-delay-us = <100000>;
+		};
+
+		dwmmc at 10214000 { /* sdmmc */
+			num-slots = <1>;
+			status = "okay";
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4>;
+			vmmc-supply = <&vcc_sd0>;
+
+			slot at 0 {
+				reg = <0>;
+				bus-width = <4>;
+				disable-wp;
+			};
+		};
+
+		dwmmc at 10218000 { /* wifi */
+			num-slots = <1>;
+			status = "okay";
+			non-removable;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus4>;
+
+			slot at 0 {
+				reg = <0>;
+				bus-width = <4>;
+				disable-wp;
+			};
+		};
+
+		gpio-keys {
+			compatible = "gpio-keys";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			autorepeat;
+
+			button at 0 {
+				gpios = <&gpio6 2 GPIO_ACTIVE_LOW>; /* GPIO6_A2 */
+				linux,code = <116>;
+				label = "GPIO Key Power";
+				linux,input-type = <1>;
+				gpio-key,wakeup = <1>;
+				debounce-interval = <100>;
+			};
+			button at 1 {
+				gpios = <&gpio4 21 GPIO_ACTIVE_LOW>; /* GPIO4_C5 */
+				linux,code = <104>;
+				label = "GPIO Key Vol-";
+				linux,input-type = <1>;
+				gpio-key,wakeup = <0>;
+				debounce-interval = <100>;
+			};
+			/* VOL+ comes somehow thru the ADC */
+		};
+	};
+};
Signature · 1 line
1.7.10.4
author maintainer
#4 lore raw

PATCH 4/5 ARM: rockchip: add support for rk3188 and Radxa Rock board

In reply to Heiko Stübner

Basic devicetree files for the rk3188 SoC. Also provided is a board dts file for the upcoming Radxa Rock board using this SoC.

---
 arch/arm/boot/dts/rk3188-clocks.dtsi   |  289 ++++++++++++++++++++++++++++++++
 arch/arm/boot/dts/rk3188-radxarock.dts |   80 +++++++++
 arch/arm/boot/dts/rk3188.dtsi          |  253 ++++++++++++++++++++++++++++
 3 files changed, 622 insertions(+)
 create mode 100644 arch/arm/boot/dts/rk3188-clocks.dtsi
 create mode 100644 arch/arm/boot/dts/rk3188-radxarock.dts
 create mode 100644 arch/arm/boot/dts/rk3188.dtsi
arch/arm/boot/dts/rk3188-clocks.dtsi new file +289 -0
new file mode 100644
index 0000000..b1b92dc
@@ -0,0 +1,289 @@
+/*
+ * Copyright (c) 2013 MundoReader S.L.
+ * Author: Heiko Stuebner <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/ {
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/*
+		 * This is a dummy clock, to be used as placeholder on
+		 * other mux clocks when a specific parent clock is not
+		 * yet implemented. It should be dropped when the driver
+		 * is complete.
+		 */
+		dummy: dummy {
+			compatible = "fixed-clock";
+			clock-frequency = <0>;
+			#clock-cells = <0>;
+		};
+
+		xin24m: xin24m {
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+			#clock-cells = <0>;
+		};
+
+		dummy48m: dummy48m {
+			compatible = "fixed-clock";
+			clock-frequency = <48000000>;
+			#clock-cells = <0>;
+		};
+
+		dummy150m: dummy150m {
+			compatible = "fixed-clock";
+			clock-frequency = <150000000>;
+			#clock-cells = <0>;
+		};
+
+		clk_gates0: gate-clk at 200000d0 {
+			compatible = "rockchip,rk2928-gate-clk";
+			reg = <0x200000d0 0x4>;
+			clocks = <&dummy150m>, <&dummy>,
+				 <&dummy>, <&dummy>,
+				 <&dummy>, <&dummy>,
+				 <&dummy>, <&dummy>,
+				 <&dummy>, <&dummy>,
+				 <&dummy>, <&dummy>,
+				 <&dummy>, <&dummy>,
+				 <&dummy>, <&dummy>;
+
+			clock-output-names =
+				"gate_core_periph", "gate_cpu_gpll",
+				"gate_ddrphy", "gate_aclk_cpu",
+				"gate_hclk_cpu", "gate_pclk_cpu",
+				"gate_atclk_cpu", "gate_aclk_core",
+				"reserved", "gate_i2s0",
+				"gate_i2s0_frac", "reserved",
+				"reserved", "gate_spdif",
+				"gate_spdif_frac", "gate_testclk";
+
+			#clock-cells = <1>;
+		};
+
+		clk_gates1: gate-clk at 200000d4 {
+			compatible = "rockchip,rk2928-gate-clk";
+			reg = <0x200000d4 0x4>;
+			clocks = <&xin24m>, <&xin24m>,
+				 <&xin24m>, <&dummy>,
+				 <&dummy>, <&xin24m>,
+				 <&xin24m>, <&dummy>,
+				 <&xin24m>, <&dummy>,
+				 <&xin24m>, <&dummy>,
+				 <&xin24m>, <&dummy>,
+				 <&xin24m>, <&dummy>;
+
+			clock-output-names =
+				"gate_timer0", "gate_timer1",
+				"gate_timer3", "gate_jtag",
+				"gate_aclk_lcdc1_src", "gate_otgphy0",
+				"gate_otgphy1", "gate_ddr_gpll",
+				"gate_uart0", "gate_frac_uart0",
+				"gate_uart1", "gate_frac_uart1",
+				"gate_uart2", "gate_frac_uart2",
+				"gate_uart3", "gate_frac_uart3";
+
+			#clock-cells = <1>;
+		};
+
+		clk_gates2: gate-clk at 200000d8 {
+			compatible = "rockchip,rk2928-gate-clk";
+			reg = <0x200000d8 0x4>;
+			clocks = <&clk_gates2 1>, <&dummy>,
+				 <&dummy>, <&dummy>,
+				 <&dummy>, <&dummy>,
+				 <&clk_gates2 3>, <&dummy>,
+				 <&dummy>, <&dummy>,
+				 <&dummy>, <&dummy48m>,
+				 <&dummy>, <&dummy48m>,
+				 <&dummy>, <&dummy>;
+
+			clock-output-names =
+				"gate_periph_src", "gate_aclk_periph",
+				"gate_hclk_periph", "gate_pclk_periph",
+				"gate_smc", "gate_mac",
+				"gate_hsadc", "gate_hsadc_frac",
+				"gate_saradc", "gate_spi0",
+				"gate_spi1", "gate_mmc0",
+				"gate_mac_lbtest", "gate_mmc1",
+				"gate_emmc", "reserved";
+
+			#clock-cells = <1>;
+		};
+
+		clk_gates3: gate-clk at 200000dc {
+			compatible = "rockchip,rk2928-gate-clk";
+			reg = <0x200000dc 0x4>;
+			clocks = <&dummy>, <&dummy>,
+				 <&dummy>, <&dummy>,
+				 <&xin24m>, <&xin24m>,
+				 <&dummy>, <&dummy>,
+				 <&xin24m>, <&dummy>,
+				 <&dummy>, <&dummy>,
+				 <&dummy>, <&dummy>,
+				 <&xin24m>, <&dummy>;
+
+			clock-output-names =
+				"gate_aclk_lcdc0_src", "gate_dclk_lcdc0",
+				"gate_dclk_lcdc1", "gate_pclkin_cif0",
+				"gate_timer2", "gate_timer4",
+				"gate_hsicphy", "gate_cif0_out",
+				"gate_timer5", "gate_aclk_vepu",
+				"gate_hclk_vepu", "gate_aclk_vdpu",
+				"gate_hclk_vdpu", "reserved",
+				"gate_timer6", "gate_aclk_gpu_src";
+
+			#clock-cells = <1>;
+		};
+
+		clk_gates4: gate-clk at 200000e0 {
+			compatible = "rockchip,rk2928-gate-clk";
+			reg = <0x200000e0 0x4>;
+			clocks = <&clk_gates2 2>, <&clk_gates2 3>,
+				 <&clk_gates2 1>, <&clk_gates2 1>,
+				 <&clk_gates2 1>, <&clk_gates2 2>,
+				 <&clk_gates2 2>, <&clk_gates2 2>,
+				 <&clk_gates0 4>, <&clk_gates0 4>,
+				 <&clk_gates0 3>, <&dummy>,
+				 <&clk_gates0 3>, <&dummy>,
+				 <&dummy>, <&dummy>;
+
+			clock-output-names =
+				"gate_hclk_peri_axi_matrix", "gate_pclk_peri_axi_matrix",
+				"gate_aclk_cpu_peri", "gate_aclk_peri_axi_matrix",
+				"gate_aclk_pei_niu", "gate_hclk_usb_peri",
+				"gate_hclk_peri_ahb_arbi", "gate_hclk_emem_peri",
+				"gate_hclk_cpubus", "gate_hclk_ahb2apb",
+				"gate_aclk_strc_sys", "reserved",
+				"gate_aclk_intmem", "reserved",
+				"gate_hclk_imem1", "gate_hclk_imem0";
+
+			#clock-cells = <1>;
+		};
+
+		clk_gates5: gate-clk at 200000e4 {
+			compatible = "rockchip,rk2928-gate-clk";
+			reg = <0x200000e4 0x4>;
+			clocks = <&clk_gates0 3>, <&clk_gates2 1>,
+				 <&clk_gates0 5>, <&clk_gates0 5>,
+				 <&clk_gates0 5>, <&clk_gates0 5>,
+				 <&clk_gates0 4>, <&clk_gates0 5>,
+				 <&clk_gates2 1>, <&clk_gates2 2>,
+				 <&clk_gates2 2>, <&clk_gates2 2>,
+				 <&clk_gates2 2>, <&clk_gates4 5>;
+
+			clock-output-names =
+				"gate_aclk_dmac1", "gate_aclk_dmac2",
+				"gate_pclk_efuse", "gate_pclk_tzpc",
+				"gate_pclk_grf", "gate_pclk_pmu",
+				"gate_hclk_rom", "gate_pclk_ddrupctl",
+				"gate_aclk_smc", "gate_hclk_nandc",
+				"gate_hclk_mmc0", "gate_hclk_mmc1",
+				"gate_hclk_emmc", "gate_hclk_otg0";
+
+			#clock-cells = <1>;
+		};
+
+		clk_gates6: gate-clk at 200000e8 {
+			compatible = "rockchip,rk2928-gate-clk";
+			reg = <0x200000e8 0x4>;
+			clocks = <&clk_gates3 0>, <&clk_gates0 4>,
+				 <&clk_gates0 4>, <&clk_gates1 4>,
+				 <&clk_gates0 4>, <&clk_gates3 0>,
+				 <&dummy>, <&dummy>,
+				 <&clk_gates3 0>, <&clk_gates0 4>,
+				 <&clk_gates0 4>, <&clk_gates1 4>,
+				 <&clk_gates0 4>, <&clk_gates3 0>;
+
+			clock-output-names =
+				"gate_aclk_lcdc0", "gate_hclk_lcdc0",
+				"gate_hclk_lcdc1", "gate_aclk_lcdc1",
+				"gate_hclk_cif0", "gate_aclk_cif0",
+				"reserved", "reserved",
+				"gate_aclk_ipp", "gate_hclk_ipp",
+				"gate_hclk_rga", "gate_aclk_rga",
+				"gate_hclk_vio_bus", "gate_aclk_vio0";
+
+			#clock-cells = <1>;
+		};
+
+		clk_gates7: gate-clk at 200000ec {
+			compatible = "rockchip,rk2928-gate-clk";
+			reg = <0x200000ec 0x4>;
+			clocks = <&clk_gates2 2>, <&clk_gates0 4>,
+				 <&clk_gates0 4>, <&dummy>,
+				 <&dummy>, <&clk_gates2 2>,
+				 <&clk_gates2 2>, <&clk_gates0 5>,
+				 <&dummy>, <&clk_gates0 5>,
+				 <&clk_gates0 5>, <&clk_gates2 3>,
+				 <&clk_gates2 3>, <&clk_gates2 3>,
+				 <&clk_gates2 3>, <&clk_gates2 3>;
+
+			clock-output-names =
+				"gate_hclk_emac", "gate_hclk_spdif",
+				"gate_hclk_i2s0_2ch", "gate_hclk_otg1",
+				"gate_hclk_hsic", "gate_hclk_hsadc",
+				"gate_hclk_pidf", "gate_pclk_timer0",
+				"reserved", "gate_pclk_timer2",
+				"gate_pclk_pwm01", "gate_pclk_pwm23",
+				"gate_pclk_spi0", "gate_pclk_spi1",
+				"gate_pclk_saradc", "gate_pclk_wdt";
+
+			#clock-cells = <1>;
+		};
+
+		clk_gates8: gate-clk at 200000f0 {
+			compatible = "rockchip,rk2928-gate-clk";
+			reg = <0x200000f0 0x4>;
+			clocks = <&clk_gates0 5>, <&clk_gates0 5>,
+				 <&clk_gates2 3>, <&clk_gates2 3>,
+				 <&clk_gates0 5>, <&clk_gates0 5>,
+				 <&clk_gates2 3>, <&clk_gates2 3>,
+				 <&clk_gates2 3>, <&clk_gates0 5>,
+				 <&clk_gates0 5>, <&clk_gates0 5>,
+				 <&clk_gates2 3>, <&dummy>;
+
+			clock-output-names =
+				"gate_pclk_uart0", "gate_pclk_uart1",
+				"gate_pclk_uart2", "gate_pclk_uart3",
+				"gate_pclk_i2c0", "gate_pclk_i2c1",
+				"gate_pclk_i2c2", "gate_pclk_i2c3",
+				"gate_pclk_i2c4", "gate_pclk_gpio0",
+				"gate_pclk_gpio1", "gate_pclk_gpio2",
+				"gate_pclk_gpio3", "gate_aclk_gps";
+
+			#clock-cells = <1>;
+		};
+
+		clk_gates9: gate-clk at 200000f4 {
+			compatible = "rockchip,rk2928-gate-clk";
+			reg = <0x200000f4 0x4>;
+			clocks = <&dummy>, <&dummy>,
+				 <&dummy>, <&dummy>,
+				 <&dummy>, <&dummy>,
+				 <&dummy>, <&dummy>;
+
+			clock-output-names =
+				"gate_clk_core_dbg", "gate_pclk_dbg",
+				"gate_clk_trace", "gate_atclk",
+				"gate_clk_l2c", "gate_aclk_vio1",
+				"gate_pclk_publ", "gate_aclk_gpu";
+
+			#clock-cells = <1>;
+		};
+	};
+
+};
arch/arm/boot/dts/rk3188-radxarock.dts new file +80 -0

80 lines not on this page · raw message

arch/arm/boot/dts/rk3188.dtsi new file +253 -0

253 lines not on this page · raw message

Signature · 1 line
1.7.10.4
author maintainer
#5 lore raw

PATCH 4/5 ARM: rockchip: add support for rk3188 and Radxa Rock board

Am Dienstag, 15. Oktober 2013, 13:01:02 schrieb Heiko St?bner:

Quoted 4 lines

Basic devicetree files for the rk3188 SoC. Also provided is a board dts file for the upcoming Radxa Rock board using this SoC.

[...]

Quoted 12 lines
arch/arm/boot/dts/rk3188.dtsi new file +12 -0
+		pinctrl at 20008000 {
+			compatible = "rockchip,rk3188-pinctrl";
+			reg = <0x20008000 0xa0>,
+			      <0x20008164 0x1a0>;
+			reg-names = "base", "pull";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			gpio0: gpio0 at 0x2000a000 {
+				compatible = "rockchip,rk3188-gpio-bank0";
+				reg = <0x2000a000 0x100>,

arch/arm/boot/dts/rk3188.dtsi line 84

Quoted 10 lines
arch/arm/boot/dts/rk3188.dtsi new file +10 -0
+				      <0x20004064 0x8>;
+				interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk_gates8 9>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};

Forgot to add, that this of course depends on the separate change to the bindings of the pinctrl driver being suitable.

Heiko

author maintainer
#6 lore raw

PATCH 5/5 MAINTAINERS: Add maintainers entry for Rockchip SoCs

In reply to Heiko Stübner

I plan to stay with the Rockchip SoCs for the foreseable future and hope to expand its support along the way.

---
 MAINTAINERS |    7 +++++++
 1 file changed, 7 insertions(+)
MAINTAINERS +7 -0
index e61c2e8..efa92cb 100644
@@ -1142,6 +1142,13 @@ F:	drivers/net/ethernet/i825xx/ether1*
 F:	drivers/net/ethernet/seeq/ether3*
 F:	drivers/scsi/arm/
 
+ARM/Rockchip SoC support
+M:	Heiko Stuebner <[email protected]>
+L:	linux-arm-kernel at lists.infradead.org (moderated for non-subscribers)
+S:	Maintained
+F:	arch/arm/mach-rockchip/
+F:	drivers/*/*rockchip*
+
 ARM/SHARK MACHINE SUPPORT
 M:	Alexander Schulz <[email protected]>
 W:	http://www.shark-linux.de/shark.html
Signature · 1 line
1.7.10.4