serial: sh: Add support R8A7790
Subsystems (2)
PATCH v2 1/3 serial: sh: Add support R8A7790
This adds the preset value to register, and setup of baudrate.
---
v2: no changes
drivers/serial/serial_sh.c | 1 + drivers/serial/serial_sh.h | 13 +++++++++++++ 2 files changed, 14 insertions(+)
drivers/serial/serial_sh.c +1 -0
@@ -1,5 +1,6 @@/* * SuperH SCIF device driver. +* Copyright (C) 2013 Renesas Electronics Corporation * Copyright (C) 2007,2008,2010 Nobuhiro Iwamatsu * Copyright (C) 2002 - 2008 Paul Mundt *
drivers/serial/serial_sh.h +13 -0
@@ -224,6 +224,9 @@ struct uart_port {# define SCSPTR3 0xffc60020/* 16 bit SCIF */ # define SCIF_ORER 0x0001/* Overrun error bit */ # define SCSCR_INIT (port) 0x38/* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ +#elif defined(CONFIG_R8A7790 ) +# define SCIF_ORER 0x0001 +# define SCSCR_INIT (port) 0x32/* TIE=0,RIE=0,TE=1,RE=1,REIE=0, */ #else # error CPU subtype not defined#endif
@@ -298,6 +301,9 @@ struct uart_port {/* SH7763 SCIF2 support */ # define SCIF2_RFDC_MASK 0x001f# define SCIF2_TXROOM_MAX 16 +#elif defined(CONFIG_R8A7790 ) +# define SCIF_ERRORS (SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK) +# define SCIF_RFDC_MASK 0x003f#else # define SCIF_ERRORS (SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK)# define SCIF_RFDC_MASK 0x001f
@@ -579,6 +585,10 @@ SCIF_FNS(SCSPTR, 0, 0, 0, 0)#else SCIF_FNS(SCSPTR, 0, 0, 0x20, 16)#endif +#if defined(CONFIG_R8A7790 ) +SCIF_FNS(DL, 0, 0, 0x30, 16) +SCIF_FNS(CKS, 0, 0, 0x34, 16) +#endif SCIF_FNS(SCLSR, 0, 0, 0x24, 16)#endif #endif
@@ -720,6 +730,9 @@ static inline int scbrr_calc(struct uart_port port, int bps, int clk)#define SCBRR_VALUE (bps, clk) scbrr_calc(sh_sci, bps, clk)#elif defined(__H8300H__) || defined(__H8300S__)#define SCBRR_VALUE (bps, clk) (((clk*1000/32)/bps)-1) +#elif defined(CONFIG_R8A7790 ) +#define SCBRR DL +#define SCBRR_VALUE (bps, clk) (clk / bps / 16)#else /* Generic SH */ #define SCBRR_VALUE (bps, clk) ((clk+16*bps)/(32*bps)-1)#endif
Signature · 1 line
1.8.4.rc3
PATCH v2 2/3 arm: rmobile: Add support r8a7790
Renesas R8A7790 is CPU with Cortex-A7 and A15. This supports the basic register definition and GPIO and framework of PFC.
---
v2: no changess.
arch/arm/cpu/armv7/rmobile/Makefile | 7 +- arch/arm/cpu/armv7/rmobile/cpu_info-r8a7790.c | 22 + arch/arm/cpu/armv7/rmobile/cpu_info.c | 5 + arch/arm/cpu/armv7/rmobile/lowlevel_init_ca15.S | 60 + arch/arm/cpu/armv7/rmobile/pfc-r8a7790.c | 3231 ++++++++++++++++++++++ arch/arm/include/asm/arch-rmobile/gpio.h | 3 + arch/arm/include/asm/arch-rmobile/r8a7790-gpio.h | 387 +++ arch/arm/include/asm/arch-rmobile/r8a7790.h | 598 ++++ arch/arm/include/asm/arch-rmobile/rmobile.h | 2 + 9 files changed, 4314 insertions(+), 1 deletion(-) create mode 100644 arch/arm/cpu/armv7/rmobile/cpu_info-r8a7790.c create mode 100644 arch/arm/cpu/armv7/rmobile/lowlevel_init_ca15.S create mode 100644 arch/arm/cpu/armv7/rmobile/pfc-r8a7790.c create mode 100644 arch/arm/include/asm/arch-rmobile/r8a7790-gpio.h create mode 100644 arch/arm/include/asm/arch-rmobile/r8a7790.h
arch/arm/cpu/armv7/rmobile/Makefile +6 -1
@@ -9,12 +9,17 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(SOC).o -SOBJS = lowlevel_init.o COBJS-y += cpu_info.o COBJS-y += emac.o +SOBJS-$(CONFIG_R8A7740) += lowlevel_init.o +SOBJS-$(CONFIG_SH73A0) += lowlevel_init.o +SOBJS-$(CONFIG_R8A7790) += lowlevel_init_ca15.o +SOBJS = $(SOBJS-y) + COBJS-$(CONFIG_DISPLAY_BOARDINFO) += board.o COBJS-$(CONFIG_GLOBAL_TIMER) += timer.o +COBJS-$(CONFIG_R8A7790) += cpu_info-r8a7790.o pfc-r8a7790.o COBJS-$(CONFIG_R8A7740) += cpu_info-r8a7740.o COBJS-$(CONFIG_R8A7740) += pfc-r8a7740.o COBJS-$(CONFIG_SH73A0) += cpu_info-sh73a0.o
arch/arm/cpu/armv7/rmobile/cpu_info-r8a7790.c new file +22 -0
@@ -0,0 +1,22 @@ +/* +* arch/arm/cpu/armv7/rmobile/cpu_info-r8a7790.c +* This file is r8a7790 processor support. +* +* Copyright (C) 2013 Renesas Electronics Corporation +* +* SPDX-License-Identifier: GPL-2.0 +*/ +#include <common.h> +#include <asm/io.h> + +#define PRR 0xFF000044 + +u32 rmobile_get_cpu_type (void ) +{ +return (readl (PRR ) &0x00007F00 ) >>8 ; +} + +u32 rmobile_get_cpu_rev_integer (void ) +{ +return (readl (PRR ) &0x000000F0 ) >>4 ; +}
arch/arm/cpu/armv7/rmobile/cpu_info.c +5 -0
@@ -58,6 +58,11 @@ int print_cpuinfo(void) rmobile_get_cpu_rev_fraction());break ; +case 0x45 : +printf ("CPU: Renesas Electronics R8A7790 rev %d\n" , +rmobile_get_cpu_rev_integer ()); +break ; +default : printf("CPU: Renesas Electronics CPU rev %d.%d\n", rmobile_get_cpu_rev_integer(),
arch/arm/cpu/armv7/rmobile/lowlevel_init_ca15.S new file +60 -0
60 lines not on this page · raw message
arch/arm/cpu/armv7/rmobile/pfc-r8a7790.c new file +3231 -0
2,889 lines not on this page · raw message
arch/arm/include/asm/arch-rmobile/gpio.h +3 -0
Lines of this file are not shown. View the raw message.
arch/arm/include/asm/arch-rmobile/r8a7790-gpio.h new file +387 -0
387 lines not on this page · raw message
arch/arm/include/asm/arch-rmobile/r8a7790.h new file +598 -0
598 lines not on this page · raw message
arch/arm/include/asm/arch-rmobile/rmobile.h +2 -0
Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
Signature · 1 line
1.8.4.rc3
Part of the diff is not shown here. View the raw message.
PATCH v2 3/3 arm: rmobile: Add support lager board
In reply to Nobuhiro IwamatsuThe lager board has R8A7790, 2GB DDR3-SDRAM, USB,
Ethernet, and more.
This patch supports the following functions:
- DDR3-SDRAM
- SCIF
- QSPI
- Ethernet
---
v2: Remove changes for mach-types.h.
Rebase boards.cfg.
board/renesas/lager/Makefile | 35 ++ board/renesas/lager/lager.c | 357 ++++++++++++++ board/renesas/lager/qos.c | 1112 ++++++++++++++++++++++++++++++++++++++++++ board/renesas/lager/qos.h | 12 + boards.cfg | 2 + include/configs/lager.h | 188 +++++++ 6 files changed, 1706 insertions(+) create mode 100644 board/renesas/lager/Makefile create mode 100644 board/renesas/lager/lager.c create mode 100644 board/renesas/lager/qos.c create mode 100644 board/renesas/lager/qos.h create mode 100644 include/configs/lager.h
board/renesas/lager/Makefile new file +35 -0
@@ -0,0 +1,35 @@ +# +# board/renesas/lager/Makefile +# +# Copyright (C) 2013 Renesas Electronics Corporation +# +# SPDX-License-Identifier: GPL-2.0 +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).o + +COBJS := lager.o qos.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(call cmd_link_o_target, $(OBJS) $(SOBJS)) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +#########################################################################
board/renesas/lager/lager.c new file +357 -0
357 lines not on this page · raw message
board/renesas/lager/qos.c new file +1112 -0
1,112 lines not on this page · raw message
board/renesas/lager/qos.h new file +12 -0
@@ -0,0 +1,12 @@ +/* +* Copyright (C) 2013 Renesas Electronics Corporation +* +* SPDX-License-Identifier: GPL-2.0 +*/ + +#ifndef __QOS_H__ +#define __QOS_H__ + +void qos_init (void ); + +#endif
boards.cfg +2 -0
@@ -333,6 +333,8 @@ Active arm armv7 omap5 ti dra7xx Active arm armv7 omap5 ti omap5_uevm omap5_uevm - - Active arm armv7 rmobile atmark-techno armadillo-800eva armadillo-800eva - Nobuhiro Iwamatsu <[email protected]> Active arm armv7 rmobile kmc kzm9g kzm9g - Nobuhiro Iwamatsu <[email protected]>:Tetsuyuki Kobayashi <[email protected]> +Active arm armv7 rmobile renesas lager lager - Nobuhiro Iwamatsu <[email protected]> +Active arm armv7 rmobile renesas lager lager_nor lager:NORFLASH Nobuhiro Iwamatsu <[email protected]> Active arm armv7 s5pc1xx samsung goni s5p_goni - Minkyu Kang <[email protected]> Active arm armv7 s5pc1xx samsung smdkc100 smdkc100 - Minkyu Kang <[email protected]> Active arm armv7 socfpga altera socfpga socfpga_cyclone5 - -
include/configs/lager.h new file +188 -0
188 lines not on this page · raw message
Signature · 1 line
1.8.4.rc3
PATCH v2 3/3 arm: rmobile: Add support lager board
Hi Nobuhiro,
Quoted 9 lines · Nobuhiro Iwamatsu
The lager board has R8A7790, 2GB DDR3-SDRAM, USB,
Ethernet, and more.This patch supports the following functions:
- DDR3-SDRAM
- SCIF
- QSPI
- Ethernet
Quoted 7 lines
Signed-off-by Kouei Abe <[email protected]>Signed-off-by Hisashi Nakamura <[email protected]>Signed-off-by Ryo Kataoka <[email protected]>Signed-off-by Nobuhiro Iwamatsu <[email protected]>---
v2: Remove changes formach-types.h.
Rebase boards.cfg.
This fails to build under current u-boot-arm/master. Can you please verify?
Amicalement,
Signature · 1 line
Albert.
PATCH v2 3/3 arm: rmobile: Add support lager board
Hi,
2013/10/17 Albert ARIBAUD <[email protected]>:
Quoted 22 lines
Hi Nobuhiro,
Quoted 9 lines · Nobuhiro Iwamatsu
The lager board has R8A7790, 2GB DDR3-SDRAM, USB,
Ethernet, and more.This patch supports the following functions:
- DDR3-SDRAM
- SCIF
- QSPI
- EthernetQuoted 7 lines
Signed-off-by Kouei Abe <[email protected]>Signed-off-by Hisashi Nakamura <[email protected]>Signed-off-by Ryo Kataoka <[email protected]>Signed-off-by Nobuhiro Iwamatsu <[email protected]>---
v2: Remove changes formach-types.h.
Rebase boards.cfg.
Quoted 2 lines
This fails to build under current u-boot-arm/master. Can you please verify?
I see.
I removed some config of devices. These device does not applied to u-boot/master yet.
And "arm: rmobile: Add support r8a7790" can not send to ML (but I CCed to you) and
can not show in patchwork, because this patch is too big to ML.
I already send fixed patches.
Could you check with new patches?
Quoted 4 lines
Amicalement,
--
Albert.
Best regards,
Nobuhiro
Signature · 1 line
Nobuhiro Iwamatsu