Skip to contentSkip to conversation

ARM: ux500: fix clock for GPIO blocks 6 and 7

PATCH New Linus Walleij 2 participants 3 messages Oct 18, 2013 Device tree bindings

lore
Share & tools
lore
#0 lore raw

PATCH 3/5 ARM: ux500: fix clock for GPIO blocks 6 and 7

The clock assignment in the device tree for GPIO blocks 6 and 7 was incorrect, indicating this was managed by bit 1 on PRCC 2 while it was in fact bit 11 on PRCC 2.

---
 arch/arm/boot/dts/ste-dbx5x0.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm/boot/dts/ste-dbx5x0.dtsi +2 -2
index 55abf12..5112f4c 100644
@@ -197,7 +197,7 @@
 			#gpio-cells = <2>;
 			gpio-bank = <6>;
 
-			clocks = <&prcc_pclk 2 1>;
+			clocks = <&prcc_pclk 2 11>;
 		};
 
 		gpio7: gpio at 8011e080 {
@@ -212,7 +212,7 @@
 			#gpio-cells = <2>;
 			gpio-bank = <7>;
 
-			clocks = <&prcc_pclk 2 1>;
+			clocks = <&prcc_pclk 2 11>;
 		};
 
 		gpio8: gpio at a03fe000 {
Signature · 1 line
1.8.3.1
#1 lore raw

PATCH 3/5 ARM: ux500: fix clock for GPIO blocks 6 and 7

Quoted 3 lines · Linus Walleij

The clock assignment in the device tree for GPIO blocks 6 and 7 was incorrect, indicating this was managed by bit 1 on PRCC 2 while it was in fact bit 11 on PRCC 2.

Nice catch.

It's also wrong in the driver:

        clk = clk_reg_prcc_pclk("p2_pclk10", "per2clk", clkrst2_base,
                                BIT(10), 0);
        clk_register_clkdev(clk, "hsit_hclk", "ste_hsi.0");
        PRCC_PCLK_STORE(clk, 2, 10);
 
        clk = clk_reg_prcc_pclk("p2_pclk11", "per2clk", clkrst2_base,
                                BIT(11), 0);
        clk_register_clkdev(clk, NULL, "gpio.6");
        clk_register_clkdev(clk, NULL, "gpio.7");
        clk_register_clkdev(clk, NULL, "gpioblock1");
        PRCC_PCLK_STORE(clk, 2, 1);
 
        clk = clk_reg_prcc_pclk("p2_pclk12", "per2clk", clkrst2_base,
                                BIT(12), 0);
        PRCC_PCLK_STORE(clk, 2, 12);
Signature · 4 lines
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org ? Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
#2 lore raw

PATCH 3/5 ARM: ux500: fix clock for GPIO blocks 6 and 7

Quoted 9 lines · Lee Jones
Quoted 3 lines · Linus Walleij

The clock assignment in the device tree for GPIO blocks 6 and 7 was incorrect, indicating this was managed by bit 1 on PRCC 2 while it was in fact bit 11 on PRCC 2.

Nice catch.

It's also wrong in the driver:

Sorry, forgot this: Acked-by: Lee Jones <[email protected]>

Signature · 4 lines
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org ? Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog