dma: atmel-dma: correct typo in the device tree bindings documentation
Subsystems (3)
PATCH 1/1 dma: atmel-dma: correct typo in the device tree bindings documentation
From: Ludovic Desroches <[email protected]>
The value to set ASAP mode for FIFO configuration is 2 instead of 1.
--- Documentation/devicetree/bindings/dma/atmel-dma.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
Documentation/devicetree/bindings/dma/atmel-dma.txt +1 -1
@@ -28,7 +28,7 @@ The three cells in order are: dependant: - bit 7-0: peripheral identifier for the hardware handshaking interface. The identifier can be different for tx and rx. - - bit 11-8: FIFO configuration. 0 for half FIFO, 1 for ALAP, 1 for ASAP. + - bit 11-8: FIFO configuration. 0 for half FIFO, 1 for ALAP, 2 for ASAP. Example:
Signature · 1 line
1.7.11.3
PATCH 1/1 dma: atmel-dma: correct typo in the device tree bindings documentation
On 04/10/2013 10:46, ludovic.desroches at atmel.com :
Quoted 5 lines
From: Ludovic Desroches <[email protected]>
The value to set ASAP mode for FIFO configuration is 2 instead of 1.
Signed-off-by Ludovic Desroches <[email protected]>
Yes, sure: thanks for having corrected it!
Quoted 18 lines
--- Documentation/devicetree/bindings/dma/atmel-dma.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)Documentation/devicetree/bindings/dma/atmel-dma.txt +1
-1@@ -28,7 +28,7 @@ The three cells in order are: dependant: - bit 7-0: peripheral identifier for the hardware handshaking interface. The identifier can be different for tx and rx. - - bit 11-8: FIFO configuration. 0 for half FIFO, 1 for ALAP, 1 for ASAP. + - bit 11-8: FIFO configuration. 0 for half FIFO, 1 for ALAP, 2 for ASAP. Example:
Signature · 1 line
Nicolas Ferre
PATCH 1/1 dma: atmel-dma: correct typo in the device tree bindings documentation
On 04/10/2013 10:50, Nicolas Ferre :
Quoted 10 lines
On 04/10/2013 10:46, ludovic.desroches at atmel.com :
Quoted 5 lines
From: Ludovic Desroches <[email protected]>
The value to set ASAP mode for FIFO configuration is 2 instead of 1.
Signed-off-by Ludovic Desroches <[email protected]>Yes, sure: thanks for having corrected it!
Acked-by Nicolas Ferre <[email protected]>
Vinod, ping?
Quoted 21 lines
Quoted 19 lines
--- Documentation/devicetree/bindings/dma/atmel-dma.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)Documentation/devicetree/bindings/dma/atmel-dma.txt +1
-1@@ -28,7 +28,7 @@ The three cells in order are: dependant: - bit 7-0: peripheral identifier for the hardware handshaking interface. The identifier can be different for tx and rx. - - bit 11-8: FIFO configuration. 0 for half FIFO, 1 for ALAP, 1 for ASAP. + - bit 11-8: FIFO configuration. 0 for half FIFO, 1 for ALAP, 2 for ASAP. Example:
Signature · 1 line
Nicolas Ferre
Vinod Koul
AppliedPATCH 1/1 dma: atmel-dma: correct typo in the device tree bindings documentation
In reply to ludovic.desroches at atmel.comQuoted 3 lines · ludovic.desroches at atmel.com
From: Ludovic Desroches <[email protected]>
The value to set ASAP mode for FIFO configuration is 2 instead of 1.
Applied, thanks
--
~Vinod