Skip to contentSkip to conversation

Versatile Express config update for 3.13

PATCH New Pawel Moll 4 participants 11 messages Oct 16, 2013 – Oct 28, 2013

Subsystems (3)
lore
Share & tools
lore

Pawel Moll

author
#0 lore raw

cover Versatile Express config update for 3.13

Greetings,

This micro-series updates the Versatile Express defconfig in two stages:

1. Makes the defconfig-ed kernels actually work on real boards and QEMU.
2. Enables all platform-specific drivers and features.

The first patch definitely should go in, as it is a de-facto bug fix. The second has been suggested to increase build coverage.

I've tried to keep the changes to minimum. The patches can be also pulled as described below.

Cheers!

Pawel

The following changes since commit 61e6cfa80de5760bbe406f4e815b7739205754d2:

Linux 3.12-rc5 (2013-10-13 15:41:28 -0700)

are available in the git repository at:

git://git.linaro.org/people/pawelmoll/linux.git tags/vexpress/defconfig-for-v3.13

for you to fetch changes up to 04650cf989f418b7c28f94d63c0c174d34e0a9ad:

ARM: vexpress: Enable platform-specific options in defconfig (2013-10-16 14:23:25 +0100)

----------------------------------------------------------------
Fathi Boudra (1):
ARM: vexpress: Make defconfig work again

Pawel Moll (1):
ARM: vexpress: Enable platform-specific options in defconfig

 arch/arm/configs/vexpress_defconfig | 72 +++++++++++++++++++++++--------------
 1 file changed, 46 insertions(+), 26 deletions(-)
Signature · 1 line
1.8.1.2
author
#1 lore raw

PATCH 1/2 ARM: vexpress: Make defconfig work again

From: Fathi Boudra <[email protected]>

This patch updates the Versatile Express defconfig to a level which makes it possible to run a defconfig-ed kernel work on the board and in QEMU with modern userspace. It does:

- update cmdline to contain "console=ttyAMA0" only
- enable devtmpfs filesystem
- enable voltage regulator support
- enable ext4 filesystem
- disable low level debug and early printk

[PM: removed DEBUG_LL - it doesn't work on qemu]
[PM: reworded the commit message]
---
 arch/arm/configs/vexpress_defconfig | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)
arch/arm/configs/vexpress_defconfig +4 -3
index f2de51f..6d20bc1 100644
@@ -30,7 +30,7 @@ CONFIG_HOTPLUG_CPU=y
 CONFIG_AEABI=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/nfs nfsroot=10.1.69.3:/work/nfsroot ip=dhcp console=ttyAMA0 mem=128M"
+CONFIG_CMDLINE="console=ttyAMA0"
 CONFIG_VFP=y
 CONFIG_NEON=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
@@ -45,6 +45,7 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_IPV6 is not set
 # CONFIG_WIRELESS is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
 CONFIG_MTD=y
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
@@ -75,6 +76,7 @@ CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
 CONFIG_LEGACY_PTY_COUNT=16
 # CONFIG_HW_RANDOM is not set
 # CONFIG_HWMON is not set
+CONFIG_REGULATOR=y
 CONFIG_FB=y
 CONFIG_FB_ARMCLCD=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
@@ -115,6 +117,7 @@ CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
+CONFIG_EXT4_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
 CONFIG_JFFS2_FS=y
@@ -134,7 +137,5 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
-CONFIG_EARLY_PRINTK=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
Signature · 1 line
1.8.1.2
#2 lore raw

PATCH 1/2 ARM: vexpress: Make defconfig work again

Hi Pawel, Fathi,

Quoted 6 lines · Pawel Moll

From: Fathi Boudra <[email protected]>

This patch updates the Versatile Express defconfig to a level which makes it possible to run a defconfig-ed kernel work on the board and in QEMU with modern userspace. It does:

Quoted 8 lines

- update cmdline to contain "console=ttyAMA0" only
- enable devtmpfs filesystem
- enable voltage regulator support
- enable ext4 filesystem
- disable low level debug and early printk

[PM: removed DEBUG_LL - it doesn't work on qemu]

Does DEBUG_LL/EARLY_PRINTK break boot on QEMU? If not, why not leave it in for folks using other emulators, hardware, and maybe future versions of QEMU?

Thanks,
Christopher

Signature · 3 lines
Employee of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
hosted by the Linux Foundation.
author
#3 lore raw

PATCH 1/2 ARM: vexpress: Make defconfig work again

Quoted 7 lines · Christopher Covington
Quoted 4 lines

- disable low level debug and early printk

[PM: removed DEBUG_LL - it doesn't work on qemu]

Does DEBUG_LL/EARLY_PRINTK break boot on QEMU? If not, why not leave it in for folks using other emulators, hardware, and maybe future versions of QEMU?

Yep, unfortunately it does break qemu boot. And generally DEBUG_LL is considered to be a development-only option and in it was pointed out in many discussion that people using it must exactly know what are they doing. Definitely not a candidate for a defconfig.

As to the details of the problem, the memory map detection heuristics has been crafted do match the V2P-CA9 board processor revision, and qemu returns a different one. Just a nuisance, but very hard to debug if things go wrong. And before you ask, I'd rather remove the detection code completely than change it yet another time, which will have the same result - no DEBUG_LL enabled in defconfig because one will have to explicitly select one of two options. Pick the wrong one and you're back in the same place - nothing work and you don't know where.

Thanks for looking at the patch!

Pawel

author
#4 lore raw

PATCH 2/2 ARM: vexpress: Enable platform-specific options in defconfig

In reply to Pawel Moll

This patch enables all drivers and alike to make defconfig-ed kernels use Versatile Express specific features, like power management services (PSCI, MCPM and cpuidle with drivers for DCCSB on Fast Models and SPC on TC2), CMA for frame buffer allocation, all virtio device drivers (for QEMU, KVM tools and Fast Models), MTD physmap drivers with squashfs and UBIFS for flash, I2C master, regulator and hwmon drivers and LEDs support with most useful triggers. The maximum amount of CPUs has been increased to 8 to facilitate big.Little systems.

---
 arch/arm/configs/vexpress_defconfig | 65 ++++++++++++++++++++++++-------------
 1 file changed, 42 insertions(+), 23 deletions(-)
arch/arm/configs/vexpress_defconfig +42 -23
index 6d20bc1..f2535e3 100644
@@ -1,4 +1,3 @@
-CONFIG_EXPERIMENTAL=y
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SYSVIPC=y
 CONFIG_IKCONFIG=y
@@ -8,11 +7,9 @@ CONFIG_CGROUPS=y
 CONFIG_CPUSETS=y
 # CONFIG_UTS_NS is not set
 # CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
 # CONFIG_PID_NS is not set
 # CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_PROFILING=y
 CONFIG_OPROFILE=y
 CONFIG_MODULES=y
@@ -23,14 +20,22 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_IOSCHED_CFQ is not set
 CONFIG_ARCH_VEXPRESS=y
 CONFIG_ARCH_VEXPRESS_CA9X4=y
+CONFIG_ARCH_VEXPRESS_DCSCB=y
+CONFIG_ARCH_VEXPRESS_TC2_PM=y
 # CONFIG_SWP_EMULATE is not set
 CONFIG_SMP=y
+CONFIG_HAVE_ARM_ARCH_TIMER=y
+CONFIG_MCPM=y
 CONFIG_VMSPLIT_2G=y
-CONFIG_HOTPLUG_CPU=y
+CONFIG_NR_CPUS=8
+CONFIG_ARM_PSCI=y
 CONFIG_AEABI=y
+CONFIG_CMA=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttyAMA0"
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_BIG_LITTLE=y
 CONFIG_VFP=y
 CONFIG_NEON=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
@@ -44,39 +49,46 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 # CONFIG_WIRELESS is not set
+CONFIG_NET_9P=y
+CONFIG_NET_9P_VIRTIO=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_DEVTMPFS=y
 CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_ARM_INTEGRATOR=y
-CONFIG_MISC_DEVICES=y
+CONFIG_MTD_RAM=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_MTD_UBI=y
+CONFIG_PROC_DEVICETREE=y
+CONFIG_VIRTIO_BLK=y
 # CONFIG_SCSI_PROC_FS is not set
 CONFIG_BLK_DEV_SD=y
-# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_SCSI_VIRTIO=y
 CONFIG_ATA=y
 # CONFIG_SATA_PMP is not set
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
+CONFIG_VIRTIO_NET=y
+CONFIG_SMC91X=y
 CONFIG_SMSC911X=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
 # CONFIG_WLAN is not set
 CONFIG_INPUT_EVDEV=y
 # CONFIG_SERIO_SERPORT is not set
 CONFIG_SERIO_AMBAKMI=y
+CONFIG_LEGACY_PTY_COUNT=16
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_LEGACY_PTY_COUNT=16
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
+CONFIG_VIRTIO_CONSOLE=y
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_VIRTIO=y
+CONFIG_I2C=y
+CONFIG_I2C_VERSATILE=y
+CONFIG_SENSORS_VEXPRESS=y
 CONFIG_REGULATOR=y
+CONFIG_REGULATOR_VEXPRESS=y
 CONFIG_FB=y
 CONFIG_FB_ARMCLCD=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
@@ -105,14 +117,22 @@ CONFIG_HID_THRUSTMASTER=y
 CONFIG_HID_ZEROPLUS=y
 CONFIG_USB=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-# CONFIG_USB_DEVICE_CLASS is not set
 CONFIG_USB_MON=y
 CONFIG_USB_ISP1760_HCD=y
 CONFIG_USB_STORAGE=y
 CONFIG_MMC=y
 CONFIG_MMC_ARMMMCI=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_CPU=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_PL031=y
+CONFIG_VIRTIO_BALLOON=y
+CONFIG_VIRTIO_MMIO=y
+CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
@@ -121,21 +141,20 @@ CONFIG_EXT4_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
 CONFIG_JFFS2_FS=y
+CONFIG_UBIFS_FS=y
 CONFIG_CRAMFS=y
+CONFIG_SQUASHFS=y
+CONFIG_SQUASHFS_LZO=y
 CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
 CONFIG_ROOT_NFS=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
-CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_INFO=y
 CONFIG_DEBUG_FS=y
+CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_HUNG_TASK=y
 # CONFIG_SCHED_DEBUG is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
Signature · 1 line
1.8.1.2
#5 lore raw

PATCH 2/2 ARM: vexpress: Enable platform-specific options in defconfig

Hi Pawel,

Quoted 17 lines · Pawel Moll

This patch enables all drivers and alike to make defconfig-ed kernels use Versatile Express specific features, like power management services (PSCI, MCPM and cpuidle with drivers for DCCSB on Fast Models and SPC on TC2), CMA for frame buffer allocation, all virtio device drivers (for QEMU, KVM tools and Fast Models), MTD physmap drivers with squashfs and UBIFS for flash, I2C master, regulator and hwmon drivers and LEDs support with most useful triggers. The maximum amount of CPUs has been increased to 8 to facilitate big.Little systems.

---
 arch/arm/configs/vexpress_defconfig | 65 ++++++++++++++++++++++++-------------
 1 file changed, 42 insertions(+), 23 deletions(-)
arch/arm/configs/vexpress_defconfig +0 -0

[...]

arch/arm/configs/vexpress_defconfig CONFIG_EXT4_FS=y · line 149

Quoted 11 lines
arch/arm/configs/vexpress_defconfig +3 -1
@@ -121,21 +141,20 @@ CONFIG_EXT4_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
 CONFIG_JFFS2_FS=y
+CONFIG_UBIFS_FS=y
 CONFIG_CRAMFS=y
+CONFIG_SQUASHFS=y
+CONFIG_SQUASHFS_LZO=y
 CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
 CONFIG_ROOT_NFS=y

Isn't CONFIG_9P_FS=y needed for VirtIO passthrough filesystem support?

[...]

Thanks,
Christopher

Signature · 3 lines
Employee of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
hosted by the Linux Foundation.
author
#6 lore raw

PATCH 2/2 ARM: vexpress: Enable platform-specific options in defconfig

Quoted 5 lines · Christopher Covington
Quoted 5 lines
arch/arm/configs/vexpress_defconfig +1 -0
@@ -121,21 +141,20 @@ CONFIG_EXT4_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
 CONFIG_JFFS2_FS=y
+CONFIG_UBIFS_FS=y
Quoted 8 lines

arch/arm/configs/vexpress_defconfig CONFIG_EXT4_FS=y · line 149

Quoted 6 lines
arch/arm/configs/vexpress_defconfig +2 -1
 CONFIG_CRAMFS=y
+CONFIG_SQUASHFS=y
+CONFIG_SQUASHFS_LZO=y
 CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
 CONFIG_ROOT_NFS=y

Isn't CONFIG_9P_FS=y needed for VirtIO passthrough filesystem support?

Yes, I think you're right. I've expected 9P_VFS and NET_9P select or depend on each other.

Thanks for pointing this out!

Pawe?

#7 lore raw

PATCH 2/2 ARM: vexpress: Enable platform-specific options in defconfig

In reply to Pawel Moll

Hi Pawel,

Quoted 20 lines · Pawel Moll

This patch enables all drivers and alike to make defconfig-ed kernels use Versatile Express specific features, like power management services (PSCI, MCPM and cpuidle with drivers for DCCSB on Fast Models and SPC on TC2), CMA for frame buffer allocation, all virtio device drivers (for QEMU, KVM tools and Fast Models), MTD physmap drivers with squashfs and UBIFS for flash, I2C master, regulator and hwmon drivers and LEDs support with most useful triggers. The maximum amount of CPUs has been increased to 8 to facilitate big.Little systems.

---
 arch/arm/configs/vexpress_defconfig | 65 ++++++++++++++++++++++++-------------
 1 file changed, 42 insertions(+), 23 deletions(-)
arch/arm/configs/vexpress_defconfig +0 -0
index 6d20bc1..f2535e3 100644

[snip]

Quoted 14 lines
arch/arm/configs/vexpress_defconfig +2 -3
@@ -44,39 +49,46 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 # CONFIG_WIRELESS is not set
+CONFIG_NET_9P=y
+CONFIG_NET_9P_VIRTIO=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_DEVTMPFS=y
 CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y

arch/arm/configs/vexpress_defconfig CONFIG_IP_PNP_BOOTP=y · line 66

Quoted 10 lines
arch/arm/configs/vexpress_defconfig +3 -2
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_ARM_INTEGRATOR=y
-CONFIG_MISC_DEVICES=y
+CONFIG_MTD_RAM=y
 
 
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_OF=y

This could cause issues with CPUIdle on TC2. Since TC2 reset vector is in NOR flash, NOR flash has to be in Read mode when CPU resets and enter reset vector. But what I have seen is that NOR flash is left in Read Identifier Mode after the driver is initialised. So we need to make sure NOR device is in Read mode whenever CPU enters deeper C-states and also may have to register notifiers which seems overkill IMO. Most of the platform have separate(or secure) flash for this reason.
Is it possible to disable flash on TC2 only in it's DT something like

         flash at 0,00000000 {
                status = "disabled";
         };	

Regards,
Sudeep

author
#8 lore raw

PATCH 2/2 ARM: vexpress: Enable platform-specific options in defconfig

Quoted 10 lines · Sudeep KarkadaNagesha

arch/arm/configs/vexpress_defconfig CONFIG_IP_PNP_BOOTP=y · line 64

Quoted 2 lines
arch/arm/configs/vexpress_defconfig +2 -0
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_OF=y

This could cause issues with CPUIdle on TC2. Since TC2 reset vector is in NOR flash, NOR flash has to be in Read mode when CPU resets and enter reset vector. But what I have seen is that NOR flash is left in Read Identifier Mode after the driver is initialised. So we need to make sure NOR device is in Read mode whenever CPU enters deeper C-states and also may have to register notifiers which seems overkill IMO. Most of the platform have separate(or secure) flash for this reason.

Oh boy, yes, I remember this now.

Quoted 4 lines

Is it possible to disable flash on TC2 only in it's DT something like

         flash at 0,00000000 {
                status = "disabled";
         };	

But flash is innocent, really... I may just remove CPU_IDLE for the time being.

Pawe?

#9 lore raw

PATCH 2/2 ARM: vexpress: Enable platform-specific options in defconfig

Hi Pawel,

Quoted 14 lines · Pawel Moll
Quoted 10 lines · Sudeep KarkadaNagesha

Review

Quoted 2 lines
(quoted diff) +2 -0
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_OF=y

This could cause issues with CPUIdle on TC2. Since TC2 reset vector is in NOR flash, NOR flash has to be in Read mode when CPU resets and enter reset vector. But what I have seen is that NOR flash is left in Read Identifier Mode after the driver is initialised. So we need to make sure NOR device is in Read mode whenever CPU enters deeper C-states and also may have to register notifiers which seems overkill IMO. Most of the platform have separate(or secure) flash for this reason.

Oh boy, yes, I remember this now.

Quoted 8 lines
Quoted 4 lines

Is it possible to disable flash on TC2 only in it's DT something like

         flash at 0,00000000 {
                status = "disabled";
         };	

But flash is innocent, really... I may just remove CPU_IDLE for the time being.

I tried disabling flash device only on TC2 in DT which seem to work for me.

Regards,
Sudeep

-->8

arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts +9 -0
index d2836a2..f649c58 100644
@@ -418,3 +418,12 @@
                /include/ "vexpress-v2m-rs1.dtsi"
        };
 };
+/ {
+       smb {
+               motherboard {
+                       flash at 0,00000000 {
+                               status = "disabled";
+                       };
+               };
+       };
+};
#10 lore raw

cover Versatile Express config update for 3.13

In reply to Pawel Moll
Quoted 18 lines · Pawel Moll

Greetings,

This micro-series updates the Versatile Express defconfig in two stages:

1. Makes the defconfig-ed kernels actually work on real boards and QEMU.
2. Enables all platform-specific drivers and features.

The first patch definitely should go in, as it is a de-facto bug fix. The second has been suggested to increase build coverage.

I've tried to keep the changes to minimum. The patches can be also pulled as described below.

Cheers!

Pawel

Quoted 7 lines

The following changes since commit 61e6cfa80de5760bbe406f4e815b7739205754d2:

Linux 3.12-rc5 (2013-10-13 15:41:28 -0700)

are available in the git repository at:

git://git.linaro.org/people/pawelmoll/linux.git tags/vexpress/defconfig-for-v3.13

Based on the comments on at least the first patch I'm guessing you'll want to respin, so I'll wait for a new pull request.

-Olof