LEDS: tca6507 - fix bugs in parsing of device-tree configuration.

1/ The led_info array must be allocated to allow the full number
of LEDs even if not all are present. The array maybe be sparsely filled but it is indexed by device address so we must at least allocate as many slots as the highest address used. It is easiest just to allocate all 7.

2/ range check the 'reg' value properly.

3/ led.flags must be initialised to zero, else all leds could
be treated as GPIOs (depending on what happens to be on the stack).

Signed-off-by NeilBrown <[email protected]>

drivers/leds/leds-tca6507.c +4 -4

index 8cc304f36728..f5063f447463 100644
@@ -682,7 +682,7 @@ tca6507_led_dt_init(struct i2c_client *client)
                return ERR_PTR(-ENODEV);
 
        tca_leds = devm_kzalloc(&client->dev,
-                       sizeof(struct led_info) * count, GFP_KERNEL);
+                       sizeof(struct led_info) * NUM_LEDS, GFP_KERNEL);
        if (!tca_leds)
                return ERR_PTR(-ENOMEM);
 

@@ -695,9 +695,9 @@ tca6507_led_dt_init(struct i2c_client *client)
                        of_get_property(child, "label", NULL) ? : child->name;
                led.default_trigger =
                        of_get_property(child, "linux,default-trigger", NULL);
-
+               led.flags = 0;
                ret = of_property_read_u32(child, "reg", &reg);
-               if (ret != 0)
+               if (ret != 0 || reg < 0 || reg >= NUM_LEDS)
                        continue;
 
                tca_leds[reg] = led;

@@ -708,7 +708,7 @@ tca6507_led_dt_init(struct i2c_client *client)
                return ERR_PTR(-ENOMEM);
 
        pdata->leds.leds = tca_leds;
-       pdata->leds.num_leds = count;
+       pdata->leds.num_leds = NUM_LEDS;
 
        return pdata;
 }