hmc5843 - add basic dt support
Subsystems (4)
PATCH 1/1 hmc5843 - add basic dt support
No configuration, just a compatible string and documentation.
Documentation/devicetree/bindings/iio/magnetometer/hmc5843.txt new file +17 -0
@@ -0,0 +1,17 @@ +* Honeywell HMC5843 magnetometer sensor + +Required properties: + + - compatible : should be "honeywell,hmc5843" + - reg : the I2C address of the magnetometer - typically 0x1e + +Optional properties: + + - gpios : should be device tree identifier of the magnetometer DRDY pin + +Example: + +hmc5843@1e { + compatible = "honeywell,hmc5843" + reg = <0x1e>; +};
drivers/staging/iio/magnetometer/hmc5843.c +7 -0
@@ -719,10 +719,17 @@ static const struct i2c_device_id hmc5843_id[] = { };MODULE_DEVICE_TABLE (i2c, hmc5843_id); +static const struct of_device_id hmc5843_of_match[] = { + { .compatible ="honeywell,hmc5843" }, + {} +}; +MODULE_DEVICE_TABLE (of, hmc5843_of_match); +static struct i2c_driver hmc5843_driver = { .driver = { .name ="hmc5843" , .pm =HMC5843_PM_OPS , + .of_match_table =of_match_ptr (hmc5843_of_match), }, .id_table = hmc5843_id, .probe = hmc5843_probe,
Jonathan Cameron
maintainer-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Quoted 5 lines · NeilBrown
No configuration, just a compatible string and documentation.
Signed-off-by NeilBrown <[email protected]>
Looks fine to me and it's been a 3 weeks without any negative feedback so applied to the togreg branch of iio.git.
Looking briefly at the datasheet it seems likely that this binding might gain a pair of regulators at some point, but we can do that when anyone cares.
Thanks,
Jonathan
Quoted 14 lines
(quoted diff) +0
-0
b/Documentation/devicetree/bindings/iio/magnetometer/hmc5843.txtnew file mode 100644 index 000000000000..90d5f34db04e ---/dev/null+++b/Documentation/devicetree/bindings/iio/magnetometer/hmc5843.txt@@ -0,0 +1,17 @@ +* Honeywell HMC5843 magnetometer sensor + +Required properties: + + - compatible : should be "honeywell,hmc5843" + - reg : the I2C address of the magnetometer - typically0x1e+ +Optional properties: + + - gpios : should be device tree identifier of the magnetometer DRDY pin + +Example: + +hmc5843@1e { +
compatible = "honeywell,hmc5843" + reg = <0x1e>; +}; diff --gita/drivers/staging/iio/magnetometer/hmc5843.cb/drivers/staging/iio/magnetometer/hmc5843.cindexc3f3f539e787..829734a82f69100644 ---a/drivers/staging/iio/magnetometer/hmc5843.c+++b/drivers/staging/iio/magnetometer/hmc5843.c@@ -719,10 +719,17 @@ static const structi2c_device_idhmc5843_id[] = { };MODULE_DEVICE_TABLE(i2c, hmc5843_id);(quoted diff) +2
-0+static const struct of_device_id hmc5843_of_match[] = { + { .compatible = "honeywell,hmc5843" }, + {} +}; +MODULE_DEVICE_TABLE(of, hmc5843_of_match); + static struct i2c_driver hmc5843_driver = { .driver = { .name =
Quoted 3 lines
"hmc5843", .pm =
HMC5843_PM_OPS, + .of_match_table =of_match_ptr(hmc5843_of_match), }, .id_table =hmc5843_id,
.probe =hmc5843_probe,
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/
iQIcBAEBAgAGBQJSkJjnAAoJEFSFNJnE9BaIBIgP/10EKlKid2t3dLwv3fEEZvUr mM6e/CfaTM41U9iHY6/MZ06EHw+3AIlUEj7VrwtVaYBuOxA7QGdjlRS7LM5MGHfd +W1LCk4x/vtdE2nr0VpeaNzV9vkok/HayDj/GiBhRjTLC0GXTUPv+mrvPL+XsCOL RlGKOUiQmrhNbHje4hSyrtcrRtiQ25VgEef6XMo7QhL2plcEBLH5WA6sP7+aQZ0S +OLNRZ+0s/nlh23nnlvqRSSl24r+N5HbSkicmUXN6G4IT0LB/MIA/t6irA6eGAws 6DEm/Syz62YV/j3N5vZLHtofXeDiYLM6hWHXwvk+Q8XJc7euZ1Mz7r5EA1ZGYNHJ 5GTBRma1uo1+CfrvZgJWagI70fPiKV6FMRME+mpmyX1NkYKe2VlL9CCtAkx53qfa joZ5FDc2IU1IL2O9YNtBu2dgxOeQOTBr3K5cpn4gY2oFxDetOQJRvArbcN/j/PHv wQesd2HNrqGpwVRI3HN70XPl8dRTU+Jl2tFVv6hON+1f1nD7qFGo/LCyWBCppQy+ 5tDwNaLPFdjGNY5OQHx41WRfL0ckVyqmCd5y2za7FI7DDjUi+zJ4/e2lCqyFqr4t dN5mjRM7ZPopL+zb/GYAClea0XrzKkh4REaRfrH14/tU2ba5DlSSqgdHDjc8jiU3 HWL7Qy9UI6jzBt45yAsv
=ZOuh
-----END PGP SIGNATURE-----