Skip to contentSkip to conversation

cm_t35 tune up

PATCH New Nikita Kiryanov 2 participants 9 messages Oct 7, 2013 – Nov 4, 2013

lore
Share & tools
lore
#0 lore raw

cover cm_t35 tune up

This patchset is a collection of short cm_t35 updates. It changes some configuration parameters and turns on GPIO commands.

Nikita Kiryanov (3):
cm_t35: reduce default bootdelay to 3 seconds
cm_t35: turn on GPIO commands
cm_t35: update lcd predefines

 board/compulab/cm_t35/display.c | 8 +++++++-
 include/configs/cm_t35.h        | 3 ++-
 2 files changed, 9 insertions(+), 2 deletions(-)
Signature · 1 line
1.8.1.2
#1 lore raw

PATCH 1/3 cm_t35: reduce default bootdelay to 3 seconds

Current default bootdelay of 10 seconds is too long. Reduce default bootdelay to 3 seconds.

---
 include/configs/cm_t35.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
include/configs/cm_t35.h +1 -1
index bc5b66c..f74ccdc 100644
@@ -169,7 +169,7 @@
 #define CONFIG_SYS_MAX_NAND_DEVICE	1		/* Max number of NAND */
 							/* devices */
 /* Environment information */
-#define CONFIG_BOOTDELAY		10
+#define CONFIG_BOOTDELAY		3
 #define CONFIG_ZERO_BOOTDELAY_CHECK
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
Signature · 1 line
1.8.1.2
#2 lore raw

PATCH 1/3 cm_t35: reduce default bootdelay to 3 seconds

Quoted 5 lines · Nikita Kiryanov

Current default bootdelay of 10 seconds is too long. Reduce default bootdelay to 3 seconds.

Applied to u-boot-ti/master, thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20131104/7f4cfdf6/attachment.pgp>
#3 lore raw

PATCH 2/3 cm_t35: turn on GPIO commands

In reply to Nikita Kiryanov

Turn on GPIO commands for cm-t35 and cm-t3730.

---
 include/configs/cm_t35.h | 1 +
 1 file changed, 1 insertion(+)
include/configs/cm_t35.h +1 -0
index f74ccdc..eff35b9 100644
@@ -23,6 +23,7 @@
 #define CONFIG_OMAP	/* in a TI OMAP core */
 #define CONFIG_OMAP34XX	/* which is a 34XX */
 #define CONFIG_OMAP_GPIO
+#define CONFIG_CMD_GPIO
 #define CONFIG_CM_T3X	/* working with CM-T35 and CM-T3730 */
 #define CONFIG_OMAP_COMMON
 
Signature · 1 line
1.8.1.2
#4 lore raw

PATCH 2/3 cm_t35: turn on GPIO commands

Quoted 4 lines · Nikita Kiryanov

Turn on GPIO commands for cm-t35 and cm-t3730.

Applied to u-boot-ti/master, thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20131104/9fc333fd/attachment.pgp>
#5 lore raw

PATCH 3/3 cm_t35: update lcd predefines

In reply to Nikita Kiryanov

Current predefines do not fit cm-t3730 very well (some of them produce artifacts in the image).
Update LCD predefines to accommodate both cm-t35 and cm-t3730 modules.

---
 board/compulab/cm_t35/display.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)
board/compulab/cm_t35/display.c +7 -1
index fae8d95..ead821e 100644
@@ -51,6 +51,7 @@ static const struct panel_config preset_dvi_640X480 = {
 	.lcd_size	= PANEL_LCD_SIZE(640, 480),
 	.timing_h	= DSS_HBP(48) | DSS_HFP(16) | DSS_HSW(96),
 	.timing_v	= DSS_VBP(33) | DSS_VFP(10) | DSS_VSW(2),
+	.pol_freq	= DSS_IHS | DSS_IVS | DSS_IPC,
 	.divisor	= 12 | (1 << 16),
 	.data_lines	= LCD_INTERFACE_24_BIT,
 	.panel_type	= ACTIVE_DISPLAY,
@@ -62,6 +63,7 @@ static const struct panel_config preset_dvi_800X600 = {
 	.lcd_size	= PANEL_LCD_SIZE(800, 600),
 	.timing_h	= DSS_HBP(88) | DSS_HFP(40) | DSS_HSW(128),
 	.timing_v	= DSS_VBP(23) | DSS_VFP(1) | DSS_VSW(4),
+	.pol_freq	= DSS_IHS | DSS_IVS | DSS_IPC,
 	.divisor	= 8 | (1 << 16),
 	.data_lines	= LCD_INTERFACE_24_BIT,
 	.panel_type	= ACTIVE_DISPLAY,
@@ -73,6 +75,7 @@ static const struct panel_config preset_dvi_1024X768 = {
 	.lcd_size	= PANEL_LCD_SIZE(1024, 768),
 	.timing_h	= DSS_HBP(160) | DSS_HFP(24) | DSS_HSW(136),
 	.timing_v	= DSS_VBP(29) | DSS_VFP(3) | DSS_VSW(6),
+	.pol_freq	= DSS_IHS | DSS_IVS | DSS_IPC,
 	.divisor	= 5 | (1 << 16),
 	.data_lines	= LCD_INTERFACE_24_BIT,
 	.panel_type	= ACTIVE_DISPLAY,
@@ -84,7 +87,8 @@ static const struct panel_config preset_dvi_1152X864 = {
 	.lcd_size	= PANEL_LCD_SIZE(1152, 864),
 	.timing_h	= DSS_HBP(256) | DSS_HFP(64) | DSS_HSW(128),
 	.timing_v	= DSS_VBP(32) | DSS_VFP(1) | DSS_VSW(3),
-	.divisor	= 3 | (1 << 16),
+	.pol_freq	= DSS_IHS | DSS_IVS | DSS_IPC,
+	.divisor	= 4 | (1 << 16),
 	.data_lines	= LCD_INTERFACE_24_BIT,
 	.panel_type	= ACTIVE_DISPLAY,
 	.load_mode	= 2,
@@ -95,6 +99,7 @@ static const struct panel_config preset_dvi_1280X960 = {
 	.lcd_size	= PANEL_LCD_SIZE(1280, 960),
 	.timing_h	= DSS_HBP(312) | DSS_HFP(96) | DSS_HSW(112),
 	.timing_v	= DSS_VBP(36) | DSS_VFP(1) | DSS_VSW(3),
+	.pol_freq	= DSS_IHS | DSS_IVS | DSS_IPC,
 	.divisor	= 3 | (1 << 16),
 	.data_lines	= LCD_INTERFACE_24_BIT,
 	.panel_type	= ACTIVE_DISPLAY,
@@ -106,6 +111,7 @@ static const struct panel_config preset_dvi_1280X1024 = {
 	.lcd_size	= PANEL_LCD_SIZE(1280, 1024),
 	.timing_h	= DSS_HBP(248) | DSS_HFP(48) | DSS_HSW(112),
 	.timing_v	= DSS_VBP(38) | DSS_VFP(1) | DSS_VSW(3),
+	.pol_freq	= DSS_IHS | DSS_IVS | DSS_IPC,
 	.divisor	= 3 | (1 << 16),
 	.data_lines	= LCD_INTERFACE_24_BIT,
 	.panel_type	= ACTIVE_DISPLAY,
Signature · 1 line
1.8.1.2
#6 lore raw

PATCH v2 3/3 cm_t35: update lcd predefines

In reply to Nikita Kiryanov

Current predefines do not fit cm-t3730 very well (some of them produce artifacts in the image).
Update LCD predefines to accommodate both cm-t35 and cm-t3730 modules.

---
Changes in V2:
- In V1 an old version of the patch was sent by mistake. This is the up to date version. It depends on http://patchwork.ozlabs.org/patch/275283/

 board/compulab/common/omap3_display.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)
board/compulab/common/omap3_display.c +7 -1
index fae8d95..ead821e 100644
@@ -51,6 +51,7 @@ static const struct panel_config preset_dvi_640X480 = {
 	.lcd_size	= PANEL_LCD_SIZE(640, 480),
 	.timing_h	= DSS_HBP(48) | DSS_HFP(16) | DSS_HSW(96),
 	.timing_v	= DSS_VBP(33) | DSS_VFP(10) | DSS_VSW(2),
+	.pol_freq	= DSS_IHS | DSS_IVS | DSS_IPC,
 	.divisor	= 12 | (1 << 16),
 	.data_lines	= LCD_INTERFACE_24_BIT,
 	.panel_type	= ACTIVE_DISPLAY,
@@ -62,6 +63,7 @@ static const struct panel_config preset_dvi_800X600 = {
 	.lcd_size	= PANEL_LCD_SIZE(800, 600),
 	.timing_h	= DSS_HBP(88) | DSS_HFP(40) | DSS_HSW(128),
 	.timing_v	= DSS_VBP(23) | DSS_VFP(1) | DSS_VSW(4),
+	.pol_freq	= DSS_IHS | DSS_IVS | DSS_IPC,
 	.divisor	= 8 | (1 << 16),
 	.data_lines	= LCD_INTERFACE_24_BIT,
 	.panel_type	= ACTIVE_DISPLAY,
@@ -73,6 +75,7 @@ static const struct panel_config preset_dvi_1024X768 = {
 	.lcd_size	= PANEL_LCD_SIZE(1024, 768),
 	.timing_h	= DSS_HBP(160) | DSS_HFP(24) | DSS_HSW(136),
 	.timing_v	= DSS_VBP(29) | DSS_VFP(3) | DSS_VSW(6),
+	.pol_freq	= DSS_IHS | DSS_IVS | DSS_IPC,
 	.divisor	= 5 | (1 << 16),
 	.data_lines	= LCD_INTERFACE_24_BIT,
 	.panel_type	= ACTIVE_DISPLAY,
@@ -84,7 +87,8 @@ static const struct panel_config preset_dvi_1152X864 = {
 	.lcd_size	= PANEL_LCD_SIZE(1152, 864),
 	.timing_h	= DSS_HBP(256) | DSS_HFP(64) | DSS_HSW(128),
 	.timing_v	= DSS_VBP(32) | DSS_VFP(1) | DSS_VSW(3),
-	.divisor	= 3 | (1 << 16),
+	.pol_freq	= DSS_IHS | DSS_IVS | DSS_IPC,
+	.divisor	= 4 | (1 << 16),
 	.data_lines	= LCD_INTERFACE_24_BIT,
 	.panel_type	= ACTIVE_DISPLAY,
 	.load_mode	= 2,
@@ -95,6 +99,7 @@ static const struct panel_config preset_dvi_1280X960 = {
 	.lcd_size	= PANEL_LCD_SIZE(1280, 960),
 	.timing_h	= DSS_HBP(312) | DSS_HFP(96) | DSS_HSW(112),
 	.timing_v	= DSS_VBP(36) | DSS_VFP(1) | DSS_VSW(3),
+	.pol_freq	= DSS_IHS | DSS_IVS | DSS_IPC,
 	.divisor	= 3 | (1 << 16),
 	.data_lines	= LCD_INTERFACE_24_BIT,
 	.panel_type	= ACTIVE_DISPLAY,
@@ -106,6 +111,7 @@ static const struct panel_config preset_dvi_1280X1024 = {
 	.lcd_size	= PANEL_LCD_SIZE(1280, 1024),
 	.timing_h	= DSS_HBP(248) | DSS_HFP(48) | DSS_HSW(112),
 	.timing_v	= DSS_VBP(38) | DSS_VFP(1) | DSS_VSW(3),
+	.pol_freq	= DSS_IHS | DSS_IVS | DSS_IPC,
 	.divisor	= 3 | (1 << 16),
 	.data_lines	= LCD_INTERFACE_24_BIT,
 	.panel_type	= ACTIVE_DISPLAY,
Signature · 1 line
1.8.1.2
#7 lore raw

PATCH v2 3/3 cm_t35: update lcd predefines

Quoted 6 lines · Nikita Kiryanov

Current predefines do not fit cm-t3730 very well (some of them produce artifacts in the image).
Update LCD predefines to accommodate both cm-t35 and cm-t3730 modules.

Applied to u-boot-ti/master, thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20131104/9d272fe1/attachment.pgp>
#8 lore raw

cover cm_t35 tune up

In reply to Nikita Kiryanov

Ping

Quoted 12 lines · Nikita Kiryanov

This patchset is a collection of short cm_t35 updates. It changes some configuration parameters and turns on GPIO commands.

Nikita Kiryanov (3):
cm_t35: reduce default bootdelay to 3 seconds
cm_t35: turn on GPIO commands
cm_t35: update lcd predefines

  board/compulab/cm_t35/display.c | 8 +++++++-
  include/configs/cm_t35.h        | 3 ++-
  2 files changed, 9 insertions(+), 2 deletions(-)
Signature · 2 lines
Regards,
Nikita.