xfstest failures
Unfortunately it seems our number of test failures is still through the roof, mostly due to the lack of updates in xfstests for other changes.
To start with the quick group in xfs I see:
generic/263
This seems to be an old issue we've largely been ignoring forever IIRC. Maybe we finally need an xfail group?
xfs/033
xfs_Repair now aborts due to a verifier failure in xfs_trans_read_buf. I think this is a real bug introduced in xfs_repair when new changes were brought in. Output diff attached.
xfs/187
Echoes "Need to update test 187 so that initial subtests do not use features2". Why do we make this a fail rather than notrun?
xfs/199
Has an unexpected XFS_SB_VERSION2_PROJID32BIT in sb_features. Given that we switched to projid32 by default this should have been updated.
xfs/206
Does not expect the ftype flag. Didn't we change a generic filter to take care of this?
xfs/296
Checking for capability on restored file -RESTORE_DIR/DUMP_SUBDIR/testfile cap_setgid,cap_setuid+ep -# file: RESTORE_DIR/DUMP_SUBDIR/testfile -security.capability
Seems like theres some issues with file capabilities.
root/xfstests/results//xfs/033.out.bad renamed from xfs/033.out +6 -162
@@ -30,165 +30,9 @@ - reset superblock... Phase 6 - check inode connectivity... reinitializing root directory - - resetting contents of realtime bitmap and summary inodes - - traversing filesystem ... - - traversal finished ... - - moving disconnected inodes to lost+found ... -Phase 7 - verify and correct link counts... -resetting inode INO nlinks from 1 to 2 -done -Corrupting rt bitmap inode - setting bits to 0 -Wrote X.XXKb (value 0x0) -Phase 1 - find and verify superblock... -Phase 2 - using <TYPEOF> log - - zero log... - - scan filesystem freespace and inode maps... - - found root inode chunk -Phase 3 - for each AG... - - scan and clear agi unlinked lists... - - process known inodes and perform inode discovery... -bad magic number 0x0 on inode INO -bad version number 0x0 on inode INO -bad magic number 0x0 on inode INO, resetting magic number -bad version number 0x0 on inode INO, resetting version number -imap claims a free inode INO is in use, correcting imap and clearing inode -cleared realtime bitmap inode INO - - process newly discovered inodes... -Phase 4 - check for duplicate blocks... - - setting up duplicate extent list... - - check for inodes claiming duplicate blocks... -Phase 5 - rebuild AG headers and trees... - - reset superblock... -Phase 6 - check inode connectivity... -reinitializing realtime bitmap inode - - resetting contents of realtime bitmap and summary inodes - - traversing filesystem ... - - traversal finished ... - - moving disconnected inodes to lost+found ... -Phase 7 - verify and correct link counts... -done -Corrupting rt summary inode - setting bits to 0 -Wrote X.XXKb (value 0x0) -Phase 1 - find and verify superblock... -Phase 2 - using <TYPEOF> log - - zero log... - - scan filesystem freespace and inode maps... - - found root inode chunk -Phase 3 - for each AG... - - scan and clear agi unlinked lists... - - process known inodes and perform inode discovery... -bad magic number 0x0 on inode INO -bad version number 0x0 on inode INO -bad magic number 0x0 on inode INO, resetting magic number -bad version number 0x0 on inode INO, resetting version number -imap claims a free inode INO is in use, correcting imap and clearing inode -cleared realtime summary inode INO - - process newly discovered inodes... -Phase 4 - check for duplicate blocks... - - setting up duplicate extent list... - - check for inodes claiming duplicate blocks... -Phase 5 - rebuild AG headers and trees... - - reset superblock... -Phase 6 - check inode connectivity... -reinitializing realtime summary inode - - resetting contents of realtime bitmap and summary inodes - - traversing filesystem ... - - traversal finished ... - - moving disconnected inodes to lost+found ... -Phase 7 - verify and correct link counts... -done -Corrupting root inode - setting bits to -1 -Wrote X.XXKb (value 0xffffffff) -Phase 1 - find and verify superblock... -Phase 2 - using <TYPEOF> log - - zero log... - - scan filesystem freespace and inode maps... - - found root inode chunk -Phase 3 - for each AG... - - scan and clear agi unlinked lists... - - process known inodes and perform inode discovery... -bad magic number 0xffff on inode INO -bad version number 0xffffffff on inode INO -bad (negative) size -1 on inode INO -bad magic number 0xffff on inode INO, resetting magic number -bad version number 0xffffffff on inode INO, resetting version number -bad (negative) size -1 on inode INO -cleared root inode INO - - process newly discovered inodes... -Phase 4 - check for duplicate blocks... - - setting up duplicate extent list... -root inode lost - - check for inodes claiming duplicate blocks... -Phase 5 - rebuild AG headers and trees... - - reset superblock... -Phase 6 - check inode connectivity... -reinitializing root directory - - resetting contents of realtime bitmap and summary inodes - - traversing filesystem ... - - traversal finished ... - - moving disconnected inodes to lost+found ... -Phase 7 - verify and correct link counts... -resetting inode INO nlinks from 1 to 2 -done -Corrupting rt bitmap inode - setting bits to -1 -Wrote X.XXKb (value 0xffffffff) -Phase 1 - find and verify superblock... -Phase 2 - using <TYPEOF> log - - zero log... - - scan filesystem freespace and inode maps... - - found root inode chunk -Phase 3 - for each AG... - - scan and clear agi unlinked lists... - - process known inodes and perform inode discovery... -bad magic number 0xffff on inode INO -bad version number 0xffffffff on inode INO -bad (negative) size -1 on inode INO -bad magic number 0xffff on inode INO, resetting magic number -bad version number 0xffffffff on inode INO, resetting version number -bad (negative) size -1 on inode INO -cleared realtime bitmap inode INO - - process newly discovered inodes... -Phase 4 - check for duplicate blocks... - - setting up duplicate extent list... - - check for inodes claiming duplicate blocks... -Phase 5 - rebuild AG headers and trees... - - reset superblock... -Phase 6 - check inode connectivity... -reinitializing realtime bitmap inode - - resetting contents of realtime bitmap and summary inodes - - traversing filesystem ... - - traversal finished ... - - moving disconnected inodes to lost+found ... -Phase 7 - verify and correct link counts... -done -Corrupting rt summary inode - setting bits to -1 -Wrote X.XXKb (value 0xffffffff) -Phase 1 - find and verify superblock... -Phase 2 - using <TYPEOF> log - - zero log... - - scan filesystem freespace and inode maps... - - found root inode chunk -Phase 3 - for each AG... - - scan and clear agi unlinked lists... - - process known inodes and perform inode discovery... -bad magic number 0xffff on inode INO -bad version number 0xffffffff on inode INO -bad (negative) size -1 on inode INO -bad magic number 0xffff on inode INO, resetting magic number -bad version number 0xffffffff on inode INO, resetting version number -bad (negative) size -1 on inode INO -cleared realtime summary inode INO - - process newly discovered inodes... -Phase 4 - check for duplicate blocks... - - setting up duplicate extent list... - - check for inodes claiming duplicate blocks... -Phase 5 - rebuild AG headers and trees... - - reset superblock... -Phase 6 - check inode connectivity... -reinitializing realtime summary inode - - resetting contents of realtime bitmap and summary inodes - - traversing filesystem ... - - traversal finished ... - - moving disconnected inodes to lost+found ... -Phase 7 - verify and correct link counts... -done +xfs_imap_to_bp: xfs_trans_read_buf() returned error 117. +cache_node_purge: refcount was 1, not zero (node=0x20bc810) + +fatal error -- could not iget root inode -- error - 117 +_check_xfs_filesystem: filesystem on /dev/vdc is inconsistent (c) (see /root/xfstests/results//xfs/033.full) +_check_xfs_filesystem: filesystem on /dev/vdc is inconsistent (r) (see /root/xfstests/results//xfs/033.full)
_______________________________________________
xfs mailing list
[email protected]
http://oss.sgi.com/mailman/listinfo/xfs
Quoted 8 lines · Christoph Hellwig
xfs/296
Checking for capability on restored file -RESTORE_DIR/DUMP_SUBDIR/testfile cap_setgid,cap_setuid+ep -# file: RESTORE_DIR/DUMP_SUBDIR/testfile -security.capability
Seems like theres some issues with file capabilities.
IIRC Eric noticed that this was broken and submitted a test for it. It would be great if someone can work on it. ;)
-Ben
_______________________________________________
xfs mailing list
[email protected]
http://oss.sgi.com/mailman/listinfo/xfs
Quoted 8 lines · Ben Myers
Quoted 7 lines · Christoph Hellwig
xfs/296
Checking for capability on restored file -RESTORE_DIR/DUMP_SUBDIR/testfile cap_setgid,cap_setuid+ep -# file: RESTORE_DIR/DUMP_SUBDIR/testfile -security.capability
Quoted 4 lines
Quoted 1 line
Seems like theres some issues with file capabilities.
IIRC Eric noticed that this was broken and submitted a test for it. It would be great if someone can work on it. ;)
that's right, it's a known bug w/ a testcase but no fix yet.
I looked a bit, but ugh, xfsdump.
-Eric
_______________________________________________
xfs mailing list
[email protected]
http://oss.sgi.com/mailman/listinfo/xfs
Quoted 3 lines · Eric Sandeen
that's right, it's a known bug w/ a testcase but no fix yet.
I looked a bit, but ugh, xfsdump.
Maybe it's time you come up with an xfail mechanism at least?
_______________________________________________
xfs mailing list
[email protected]
http://oss.sgi.com/mailman/listinfo/xfs
Quoted 6 lines · Christoph Hellwig
Quoted 3 lines · Eric Sandeen
that's right, it's a known bug w/ a testcase but no fix yet.
I looked a bit, but ugh, xfsdump.
Maybe it's time you come up with an xfail mechanism at least?
What's the proposal there, a "fail" group for things known to still fail everywhere?
so i.e. ./check -x fail ? I can easily send a patch for that if that's what folks want.
-Eric
_______________________________________________
xfs mailing list
[email protected]
http://oss.sgi.com/mailman/listinfo/xfs
Quoted 6 lines · Eric Sandeen
Quoted 5 lines · Christoph Hellwig
Quoted 3 lines · Eric Sandeen
that's right, it's a known bug w/ a testcase but no fix yet.
I looked a bit, but ugh, xfsdump.
Quoted 7 lines
Quoted 1 line
Maybe it's time you come up with an xfail mechanism at least?
What's the proposal there, a "fail" group for things known to still fail everywhere?
so i.e. ./check -x fail ? I can easily send a patch for that if that's what folks want.
A mechnism to annotate a test as xfail, so that check would output them at the end ala:
Expected failures: common/263
Unexpected successes: reiser4/001
_______________________________________________
xfs mailing list
[email protected]
http://oss.sgi.com/mailman/listinfo/xfs
Quoted 12 lines · Christoph Hellwig
Quoted 11 lines · Eric Sandeen
Quoted 6 lines · Christoph Hellwig
Quoted 3 lines · Eric Sandeen
that's right, it's a known bug w/ a testcase but no fix yet.
I looked a bit, but ugh, xfsdump.
Maybe it's time you come up with an xfail mechanism at least?
What's the proposal there, a "fail" group for things known to still fail everywhere?
Quoted 9 lines
Quoted 2 lines
so i.e. ./check -x fail ? I can easily send a patch for that if that's what folks want.
A mechnism to annotate a test as xfail, so that check would output them at the end ala:
Expected failures: common/263
Unexpected successes: reiser4/001
The thing that's tricky about that is that what's expected depends so heavily on what kernel is running.
Would an expected failure be only for tests which are known to be not-fixed anywhere?
-Eric
_______________________________________________
xfs mailing list
[email protected]
http://oss.sgi.com/mailman/listinfo/xfs
Quoted 2 lines · Eric Sandeen
Would an expected failure be only for tests which are known to be not-fixed anywhere?
Exactly. If you want to be fancy we could allow a drop-in file to override it if you want something for RHEL testing or similar
_______________________________________________
xfs mailing list
[email protected]
http://oss.sgi.com/mailman/listinfo/xfs
Quoted 7 lines · Christoph Hellwig
Quoted 2 lines · Eric Sandeen
Would an expected failure be only for tests which are known to be not-fixed anywhere?
Exactly. If you want to be fancy we could allow a drop-in file to override it if you want something for RHEL testing or similar
Good idea to have an override, since everybody has multiple flavors to test which all have different sets of tests that fail.
_______________________________________________
xfs mailing list
[email protected]
http://oss.sgi.com/mailman/listinfo/xfs
Quoted 7 lines · Christoph Hellwig
Quoted 2 lines · Eric Sandeen
Would an expected failure be only for tests which are known to be not-fixed anywhere?
Exactly. If you want to be fancy we could allow a drop-in file to override it if you want something for RHEL testing or similar
Yup, that's exactly what the expunged test files are for. :)
Cheers,
Dave.
Signature · 7 lines
Dave Chinner [email protected] _______________________________________________ xfs mailing list [email protected] http://oss.sgi.com/mailman/listinfo/xfs
Quoted 12 lines · Christoph Hellwig
Quoted 11 lines · Eric Sandeen
Quoted 6 lines · Christoph Hellwig
Quoted 3 lines · Eric Sandeen
that's right, it's a known bug w/ a testcase but no fix yet.
I looked a bit, but ugh, xfsdump.
Maybe it's time you come up with an xfail mechanism at least?
What's the proposal there, a "fail" group for things known to still fail everywhere?
Quoted 8 lines
Quoted 2 lines
so i.e. ./check -x fail ? I can easily send a patch for that if that's what folks want.
A mechnism to annotate a test as xfail, so that check would output them at the end ala:
Expected failures: common/263
Unexpected successes: reiser4/001
If you have a test that fails in your test environment and you don't want to run it, use the expunged test mechanism. You can maintain it yourself for your own test environment.
$ cat tests/xfs/expunged 078 $ sudo MKFS_OPTIONS="-m crc=1" ./check -X expunged xfs/078 FSTYP -- xfs (debug) PLATFORM -- Linux/x86_64 test2 3.12.0-rc7-dgc+ MKFS_OPTIONS -- -f -m crc=1 /dev/vdb MOUNT_OPTIONS -- /dev/vdb /mnt/scratch
xfs/078 [expunged]
Passed all 0 tests
If we really want to, we can add default expunged files for different distros so they don't run tests that are known to fail and are not likely to be fixed automatically.
That handles the "test doesn't fail everywhere" problem that xfail has....
Cheers,
Dave.
Signature · 7 lines
Dave Chinner [email protected] _______________________________________________ xfs mailing list [email protected] http://oss.sgi.com/mailman/listinfo/xfs
Quoted 9 lines · Christoph Hellwig
Unfortunately it seems our number of test failures is still through the roof, mostly due to the lack of updates in xfstests for other changes.
To start with the quick group in xfs I see:
generic/263
This seems to be an old issue we've largely been ignoring forever IIRC. Maybe we finally need an xfail group?
It passes on different configurations. e.g. it passes on my single CPU VM with a 4k block size, but fails with 1k block size on the same VM. It fails witha 4k block size on a 4 CPU VM but passes with a 512 byte block size...
It's a race condition somewhere, because adding debug makes it stop failing. So it doesn't always fail, and it doesn't fail reliably, either, which makes all attempts i've made to find it go nowhere.
Quoted 6 lines
xfs/033
xfs_Repairnow aborts due to a verifier failure inxfs_trans_read_buf. I think this is a real bug introduced inxfs_repairwhen new changes were brought in. Output diff attached.
It's an unexpected abort from the libxfs code from verifier detected corruption. There's a few of these, and I'm slowly working my way through them (e.g. the last patch in the lastest series).
Quoted 4 lines
xfs/187
Echoes "Need to update test 187 so that initial subtests do not use features2". Why do we make this a fail rather than notrun?
The problem is that the 32 bit project ID bit is being set by default now, resulting in the sb_features2 field having a value set in it.
mkfs now needs to be explicit to use 16 bit project IDs, and a modified form of this patch needs to be added as well:
http://oss.sgi.com/archives/xfs/2013-06/msg00219.html
I need to update that patch and resend it. I get this when I run with a current mkfs with CRCs enabled:
xfs/187 0s ... [not run] attr v1 not supported
Quoted 5 lines
xfs/199
Has an unexpected
XFS_SB_VERSION2_PROJID32BITinsb_features. Given that we switched to projid32 by default this should have been updated.
Well, it needs the same mkfs treatment to specifically use 16 bit project IDs so that it still works on old kernels. And it needs the _requires_projid16bit() from the above patch, too.
Quoted 4 lines
xfs/206
Does not expect the ftype flag. Didn't we change a generic filter to take care of this?
xfs/206 has it's own mkfs filter:
http://oss.sgi.com/archives/xfs/2013-10/msg00777.html
I asked that the generic mkfs filters also be modified to support ftype, and there hasn't been any followup since then.
Quoted 8 lines
xfs/296
Checking for capability on restored file -RESTORE_DIR/DUMP_SUBDIR/testfile cap_setgid,cap_setuid+ep -# file: RESTORE_DIR/DUMP_SUBDIR/testfile -security.capability
Seems like theres some issues with file capabilities.
Long standing problem with xfs_restore and the way it restores attributes. The test was written without a fix having been made.
Cheers,
Dave.
Signature · 7 lines
Dave Chinner [email protected] _______________________________________________ xfs mailing list [email protected] http://oss.sgi.com/mailman/listinfo/xfs
Quoted 5 lines · Dave Chinner
Quoted 4 lines · Christoph Hellwig
Unfortunately it seems our number of test failures is still through the roof, mostly due to the lack of updates in xfstests for other changes.
To start with the quick group in xfs I see:
...
Quoted 5 lines
Quoted 4 lines
xfs/206
Does not expect the ftype flag. Didn't we change a generic filter to take care of this?
Quoted 7 lines
xfs/206 has it's own mkfs filter:
http://oss.sgi.com/archives/xfs/2013-10/msg00777.html
I asked that the generic mkfs filters also be modified to support ftype, and there hasn't been any followup since then.
and I said that _filter_mkfs() does not need to be changed for field type. The standard output is correct already.
http://oss.sgi.com/archives/xfs/2013-10/msg00781.html
You also said the standard output is correct, and asked that new features add environment variables in _filter_mkfs():
http://oss.sgi.com/archives/xfs/2013-10/msg00823.html
Don't see any feature including crcs doing that yet.
--Mark.
_______________________________________________
xfs mailing list
[email protected]
http://oss.sgi.com/mailman/listinfo/xfs
Quoted 9 lines · Mark Tinguely
Quoted 9 lines
Quoted 5 lines
xfs/206
Does not expect the ftype flag. Didn't we change a generic filter to take care of this?
xfs/206 has it's own mkfs filter:
And why is this patch not merged?
_______________________________________________
xfs mailing list
[email protected]
http://oss.sgi.com/mailman/listinfo/xfs
Quoted 4 lines · Christoph Hellwig
Quoted 3 lines · Mark Tinguely
Quoted 3 lines
Quoted 3 lines
xfs/206
Quoted 9 lines
Quoted 6 lines
Quoted 6 lines
Quoted 2 lines
Does not expect the ftype flag. Didn't we change a generic filter to take care of this?
xfs/206 has it's own mkfs filter:
And why is this patch not merged?
It was never reviewed.
--Mark.
_______________________________________________
xfs mailing list
[email protected]
http://oss.sgi.com/mailman/listinfo/xfs
Quoted 8 lines · Mark Tinguely
Quoted 7 lines · Christoph Hellwig
Quoted 6 lines · Mark Tinguely
Quoted 6 lines
Quoted 5 lines
xfs/206
Does not expect the ftype flag. Didn't we change a generic filter to take care of this?
Quoted 8 lines
Quoted 6 lines
Quoted 3 lines
Quoted 3 lines
xfs/206 has it's own mkfs filter:
And why is this patch not merged?
It was never reviewed.
Nor was xfstests: filter projid32bit info out of growfs & info output which I sent originally, before the ftype stuff went in.
Nor was xfstests: New _require_* tests for CRC enabled filesystems which Dave sent back in June, which Dave alluded to as fixing this as well. I circled back to it in October w/ a suggestion but haven't seen a repost.
This lag is clearly causing headaches for all of us; let's just take a deep breath & get these taken care of.
We had a really high rate of change there for a while, and keeping up on all fronts was tough.
There's been a bit of defensiveness in the replies here; let's get past that & take Christoph's list of failures and just get them taken care of.
I'll try to go through the failures and either pick up existing patches, or get new ones written, and get a new series on the list to get this all cleaned up.
-Eric
_______________________________________________
xfs mailing list
[email protected]
http://oss.sgi.com/mailman/listinfo/xfs
Quoted 9 lines · Eric Sandeen
We had a really high rate of change there for a while, and keeping up on all fronts was tough.
There's been a bit of defensiveness in the replies here; let's get past that & take Christoph's list of failures and just get them taken care of.
I'll try to go through the failures and either pick up existing patches, or get new ones written, and get a new series on the list to get this all cleaned up.
It also would be use if everyone could resend patches more than say 2 weeks old that haven't moved forward or outright rejected.
_______________________________________________
xfs mailing list
[email protected]
http://oss.sgi.com/mailman/listinfo/xfs
Quoted 7 lines · Christoph Hellwig
Quoted 6 lines · Eric Sandeen
We had a really high rate of change there for a while, and keeping up on all fronts was tough.
There's been a bit of defensiveness in the replies here; let's get past that & take Christoph's list of failures and just get them taken care of.
Quoted 7 lines
Quoted 3 lines
I'll try to go through the failures and either pick up existing patches, or get new ones written, and get a new series on the list to get this all cleaned up.
It also would be use if everyone could resend patches more than say 2 weeks old that haven't moved forward or outright rejected.
That's probably a better plan than having me confuse things by cobbling together a new series from multiple authors. So for now I'll retract my offer. ;) But let's get stuff reposted as needed and get it done.
-Eric
_______________________________________________
xfs mailing list
[email protected]
http://oss.sgi.com/mailman/listinfo/xfs
Christoph Hellwig
Reviewed-byQuoted 8 lines · Mark Tinguely
Quoted 6 lines
Quoted 3 lines
Quoted 3 lines
xfs/206 has it's own mkfs filter:
And why is this patch not merged?
It was never reviewed.
Consider it reviewed:
_______________________________________________
xfs mailing list
[email protected]
http://oss.sgi.com/mailman/listinfo/xfs
Quoted 8 lines · Dave Chinner
Quoted 4 lines
xfs_Repairnow aborts due to a verifier failure inxfs_trans_read_buf. I think this is a real bug introduced inxfs_repairwhen new changes were brought in. Output diff attached.It's an unexpected abort from the libxfs code from verifier detected corruption. There's a few of these, and I'm slowly working my way through them (e.g. the last patch in the lastest series).
Well, we realsly should have fixes this as part of the merge. Merging code that introduces regressions for the default config should not be acceptable.
Quoted 12 lines
Quoted 4 lines
xfs/187
Echoes "Need to update test 187 so that initial subtests do not use features2". Why do we make this a fail rather than notrun?
The problem is that the 32 bit project ID bit is being set by default now, resulting in the
sb_features2field having a value set in it.mkfs now needs to be explicit to use 16 bit project IDs, and a modified form of this patch needs to be added as well:
Quoted 6 lines
http://oss.sgi.com/archives/xfs/2013-06/msg00219.html
I need to update that patch and resend it. I get this when I run with a current mkfs with CRCs enabled:
xfs/187 0s ... [not run] attr v1 not supported
But it still breaks the v4 config. I have to say enabling the 32bit projids on v4 filesystems by default as a side effect of the crc changes sound worse and worse. The people who needed it already do on v4 manually, and others will get it with the v5 rollout.
But if we want to stick to v4 + 32bit projid we should at least make sure it does not break the tests.
_______________________________________________
xfs mailing list
[email protected]
http://oss.sgi.com/mailman/listinfo/xfs
Quoted 9 lines · Christoph Hellwig
Quoted 8 lines · Dave Chinner
Quoted 4 lines
xfs_Repairnow aborts due to a verifier failure inxfs_trans_read_buf. I think this is a real bug introduced inxfs_repairwhen new changes were brought in. Output diff attached.It's an unexpected abort from the libxfs code from verifier detected corruption. There's a few of these, and I'm slowly working my way through them (e.g. the last patch in the lastest series).
Well, the initial xfsprogs crc support changes were effectively merged unreviewed. That wasn't my fault - I asked that a crc-dev branch be made while review was done so early adopters didn't need to add 50+ patches to xfsprogs to be able to test the new functionality and I didn't have to keep posting it while I waited for someone to review it.
It didn't get reviewed - it got merged instead.
So, here we are, still cleaning up the pieces that review would have probably caught. Well, I'm still trying to clean up the pieces, because nobody else is and nobody seems to want the patches, either...
Quoted 12 lines
Quoted 12 lines
Quoted 4 lines
xfs/187
Echoes "Need to update test 187 so that initial subtests do not use features2". Why do we make this a fail rather than notrun?
The problem is that the 32 bit project ID bit is being set by default now, resulting in the
sb_features2field having a value set in it.mkfs now needs to be explicit to use 16 bit project IDs, and a modified form of this patch needs to be added as well:
Quoted 8 lines
Quoted 6 lines
http://oss.sgi.com/archives/xfs/2013-06/msg00219.html
I need to update that patch and resend it. I get this when I run with a current mkfs with CRCs enabled:
xfs/187 0s ... [not run] attr v1 not supported
But it still breaks the v4 config.
Actually, it doesn't. v4 configs give the same notrun output, which is wrong but doesn't result in a failure (hence I didn't notice it). Now that you've reported it I've just found a bug in the _requires_attr_v1 function that makes it always fail and notrun the test....
I have not looked at that patch since I posted it months ago because it does what I need for v5 superblocks, and nobody else has bothered to review or try it and so I don't know it's actually fundamentally broken. It's not until someone else comes along and says "all this stuff is busted" that it becomes clear that there's a problem. So, I'll fix the patch and post it again.
However, Christoph, you should not have found this stuff given it's been almost 5 months since I sent patches to handle these cases. This is a perfect example of what is wrong with the way XFS is being maintained right now.
Quoted 4 lines
I have to say enabling the 32bit
projids on v4 filesystems by default as a side effect of the crc changes sound worse and worse. The people who needed it already do on v4 manually, and others will get it with the v5 rollout.
Yes, but I did the right thing....
Quoted 2 lines
But if we want to stick to v4 + 32bit projid we should at least make sure it does not break the tests.
... because I sent xfstest patches at the same time make sure it didn't break the tests. But I, unfortunately, cannot make the maintainers review or take the patches...
That's the fundamental problem here. When I change stuff, I can't get the maintainers to do anything with the code I post unless I put on my cranky pants and start shouting and making people cry. I hate having to do this, but it seems like it's the only thing that the maintainers respond to.
Quite frankly, XFS upstream is completely dysfunctional right now and, as such, it's no longer a fun thing to work on.
Cheers,
Dave.
Signature · 7 lines
Dave Chinner [email protected] _______________________________________________ xfs mailing list [email protected] http://oss.sgi.com/mailman/listinfo/xfs
Quoted 5 lines · Dave Chinner
Actually, it doesn't. v4 configs give the same notrun output, which is wrong but doesn't result in a failure (hence I didn't notice it). Now that you've reported it I've just found a bug in the
_requires_attr_v1function that makes it always fail and notrun the test....
It fails for me running latests xfstests, latest xfsprogs an latest xfs tree in a x86 VM running the default mkfs options.
_______________________________________________
xfs mailing list
[email protected]
http://oss.sgi.com/mailman/listinfo/xfs
Quoted 11 lines · Dave Chinner
However, Christoph, you should not have found this stuff given it's been almost 5 months since I sent patches to handle these cases. This is a perfect example of what is wrong with the way XFS is being maintained right now.
That's the fundamental problem here. When I change stuff, I can't get the maintainers to do anything with the code I post unless I put on my cranky pants and start shouting and making people cry. I hate having to do this, but it seems like it's the only thing that the maintainers respond to.
I've not seen them reposted either. While review and commit latencie can vary and be very high the most effective counter measure is frequent reposts.
_______________________________________________
xfs mailing list
[email protected]
http://oss.sgi.com/mailman/listinfo/xfs
Quoted 11 lines · Dave Chinner
This is a perfect example of what is wrong with the way XFS is being maintained right now.
That's the fundamental problem here. When I change stuff, I can't get the maintainers to do anything with the code I post unless I put on my cranky pants and start shouting and making people cry. I hate having to do this, but it seems like it's the only thing that the maintainers respond to.
Quite frankly, XFS upstream is completely dysfunctional right now and, as such, it's no longer a fun thing to work on.
Then why don't you just set up a couple of git trees on git.kernel.org and ask Linus to pull directly from those?
Signature · 6 lines
Markus _______________________________________________ xfs mailing list [email protected] http://oss.sgi.com/mailman/listinfo/xfs