MPC824x: remove obsolete "PN62" board
Subsystems (2)
PATCH 1/1 MPC824x: remove obsolete "PN62" board
The MPC824x processors have long reached EOL, and the PN62 board has not seen any board-specific updates for more than a decade. It is now causing build issues. Instead of wasting time on things nobody is interested in any more, we rather drop this board.
---
Tom, as there is zero activity for the MPC82xx tree I don't invest the efforts in pushing this patch there and then sending a pull request. Can you please apply it directly? Thanks in advance -- wd
CREDITS | 2 +- arch/powerpc/cpu/mpc824x/cpu_init.c | 6 +- board/pn62/Makefile | 8 - board/pn62/cmd_pn62.c | 146 ------------------ board/pn62/misc.c | 219 --------------------------- board/pn62/pn62.c | 171 ---------------------- board/pn62/pn62.h | 145 ------------------ boards.cfg | 1 - doc/README.scrapyard | 3 +- drivers/net/pcnet.c | 10 -- include/configs/PN62.h | 285 ------------------------------------ 11 files changed, 5 insertions(+), 991 deletions(-) delete mode 100644 board/pn62/Makefile delete mode 100644 board/pn62/cmd_pn62.c delete mode 100644 board/pn62/misc.c delete mode 100644 board/pn62/pn62.c delete mode 100644 board/pn62/pn62.h delete mode 100644 include/configs/PN62.h
CREDITS +1 -1
@@ -143,7 +143,7 @@ W: www.freescale.com N: Dr. Wolfgang Grandegger E: wg at denx.de -D: Support for Interphase 4539 T1/E1/J1 PMC, PN62, CCM, SCM boards +D: Support for Interphase 4539 T1/E1/J1 PMC, CCM, SCM boards W: www.denx.de N: Peter Figuli
arch/powerpc/cpu/mpc824x/cpu_init.c +2 -4
@@ -52,7 +52,7 @@ cpu_init_f (void)CONFIG_WRITE_HALFWORD (PCICR ,0x06 );/* Bus Master, respond to PCI memory space acesses*/ /* CONFIG_WRITE_HALFWORD(PCISR, 0xffff); */ /*reset PCISR*/ -#if defined(CONFIG_MUSENKI ) || defined(CONFIG_PN62 ) +#if defined(CONFIG_MUSENKI )/* Why is this here, you ask? Try, just try setting 0x8000 * in PCIACR with CONFIG_WRITE_HALFWORD() * this one was a stumper, and we are annoyed
@@ -142,9 +142,7 @@ cpu_init_f (void)CONFIG_READ_WORD (PICR2 , val); val= val & ~ (PICR2_CF_SNOOP_WS_MASK |PICR2_CF_APHASE_WS_MASK );/*mask off waitstate bits*/ -#ifndef CONFIG_PN62 val |=PICR2_CF_SNOOP_WS_1WS |PICR2_CF_APHASE_WS_1WS ;/*1 wait state*/ -#endif CONFIG_WRITE_WORD (PICR2 , val);CONFIG_WRITE_WORD (EUMBBAR ,CONFIG_SYS_EUMB_ADDR );
@@ -186,7 +184,7 @@ cpu_init_f (void)* should define CONFIG_SYS_ACTORW to 0 if they don't want to set it, or even, if * its not set, we define it to zero in this file */ -#if defined(CONFIG_CU824 ) || defined(CONFIG_PN62 ) +#if defined(CONFIG_CU824 ) CONFIG_WRITE_WORD(MCCR4, (CONFIG_SYS_PRETOACT << MCCR4_PRETOACT_SHIFT) | (CONFIG_SYS_ACTTOPRE << MCCR4_ACTTOPRE_SHIFT) |
board/pn62/Makefile deleted +0 -8
@@ -1,8 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y = pn62.o cmd_pn62.o misc.o
board/pn62/cmd_pn62.c deleted +0 -146
146 lines not on this page · raw message
board/pn62/misc.c deleted +0 -219
219 lines not on this page · raw message
board/pn62/pn62.c deleted +0 -171
171 lines not on this page · raw message
board/pn62/pn62.h deleted +0 -145
145 lines not on this page · raw message
boards.cfg +0 -1
@@ -630,7 +630,6 @@ Active powerpc mpc824x - - hidden_dragon Active powerpc mpc824x - - linkstation linkstation_HGLAN linkstation:HGLAN=1 Guennadi Liakhovetski <[email protected]> Active powerpc mpc824x - - musenki MUSENKI - Jim Thompson <[email protected]> Active powerpc mpc824x - - mvblue MVBLUE - - -Active powerpc mpc824x - - pn62 PN62 - Wolfgang Grandegger <[email protected]> Active powerpc mpc824x - - sandpoint Sandpoint8240 - Wolfgang Denk <[email protected]> Active powerpc mpc824x - - sandpoint Sandpoint8245 - Jim Thompson <[email protected]> Active powerpc mpc824x - etin - debris - Sangmoon Kim <[email protected]>
doc/README.scrapyard +2 -1
@@ -11,7 +11,8 @@ easily if here is something they might want to dig for... Board Arch CPU Commit Removed Last known maintainer/contact ================================================================================================= -omap1510inn arm arm925t - - Kshitij Gupta <[email protected]> +pn62 powerpc mpc824x - - Wolfgang Grandegger <[email protected]> +omap1510inn arm arm925t 0610a16 2013-10-07 Kshitij Gupta <[email protected]> CANBT powerpc 405CR fb8f4fd 2013-08-07 Matthias Fuchs <[email protected]> Alaska8220 powerpc mpc8220 d6ed322 2013-05-11 Yukon8220 powerpc mpc8220 d6ed322 2013-05-11
drivers/net/pcnet.c +0 -10
@@ -290,16 +290,6 @@ static int pcnet_init (struct eth_device *dev, bd_t * bis)/* Switch pcnet to 32bit mode */ pcnet_write_bcr (dev,20 ,2 ); -#ifdef CONFIG_PN62 -/* Setup LED registers */ - val =pcnet_read_bcr (dev,2 ) |0x1000 ; -pcnet_write_bcr (dev,2 , val);/* enable LEDPE */ -pcnet_write_bcr (dev,4 ,0x5080 );/* 100MBit */ -pcnet_write_bcr (dev,5 ,0x40c0 );/* LNKSE */ -pcnet_write_bcr (dev,6 ,0x4090 );/* TX Activity */ -pcnet_write_bcr (dev,7 ,0x4084 );/* RX Activity */ -#endif -/* Set/reset autoselect bit */ val =pcnet_read_bcr (dev,2 ) & ~2 ; val |=2 ;
include/configs/PN62.h deleted +0 -285
285 lines not on this page · raw message
Signature · 1 line
1.8.3.1
PATCH 1/1 MPC824x: remove obsolete "PN62" board
Quoted 8 lines · Wolfgang Denk
The MPC824x processors have long reached EOL, and the PN62 board has not seen any board-specific updates for more than a decade. It is now causing build issues. Instead of wasting time on things nobody is interested in any more, we rather drop this board.
Signed-off-by Wolfgang Denk <[email protected]>Cc Wolfgang Grandegger <[email protected]>cc Tom Rini <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20131111/36964acb/attachment.pgp>