ARM: shmobile: Enable GPIO LEDs on Genmai
Subsystems (2)
PATCH 1/1 ARM: shmobile: Enable GPIO LEDs on Genmai
From: Magnus Damm <[email protected]>
Enable led1 and led2 on the Genmai board using
the r7s72100 SoC and the GPIO RZ driver.
---
arch/arm/boot/dts/r7s72100-genmai-reference.dts | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-)
arch/arm/boot/dts/r7s72100-genmai-reference.dts +12 -1
@@ -9,7 +9,8 @@ */ /dts-v1/; -/include/ "r7s72100.dtsi" +#include "r7s72100.dtsi" +#include <dt-bindings/gpio/gpio.h> / { model = "Genmai";
@@ -28,4 +29,14 @@ #address-cells = <1>; #size-cells = <1>; }; + + leds { + compatible = "gpio-leds"; + led1 { + gpios = <&p4 10 GPIO_ACTIVE_LOW>; + }; + led2 { + gpios = <&p4 11 GPIO_ACTIVE_LOW>; + }; + }; };
PATCH 1/1 ARM: shmobile: Enable GPIO LEDs on Genmai
Quoted 4 lines · Magnus Damm
From: Magnus Damm <[email protected]>
Enable led1 and led2 on the Genmai board using
the r7s72100 SoC and the GPIO RZ driver.
Thanks, I have queued this up.
I think there should be an accompanying defconfig update. Would you like me to prepare something?
PATCH 1/1 ARM: shmobile: Enable GPIO LEDs on Genmai
Quoted 7 lines · Simon Horman
Quoted 4 lines · Magnus Damm
From: Magnus Damm <[email protected]>
Enable led1 and led2 on the Genmai board using
the r7s72100 SoC and the GPIO RZ driver.Thanks, I have queued this up.
I was a little to hasty. I have unqueued this patch
as it depends on "ARM: shmobile: r7s72100 GPIO DT nodes for GPIO RZ" which appears to still be under discussion.
Quoted 8 lines
I think there should be an accompanying defconfig update. Would you like me to prepare something?
--
To unsubscribe from this list: send the line "unsubscribe linux-sh" in the body of a message to majordomo at vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html