Skip to contentSkip to conversation

arm, omap3: Add support for TechNexion modules

PATCH Superseded Stefan Roese 3 participants 11 messages Nov 12, 2013 – Dec 3, 2013 Arm (32-bit)

v1 of 2 Superseded Latest is v2 →

lore
Share & tools
lore
#0 lore raw

PATCH 1/5 arm, omap3: Add support for TechNexion modules

From: Tapani Utriainen <[email protected]>

Add support for TechNexion TAO3530 SoM

This patch has been posted quite a long time ago. I ported it to the latest mainline U-Boot version. With some additional cleanup and enhancements.

CC Sandeep Paulraj <[email protected]>
Cc Thorsten Eisbein <[email protected]>
Cc Tom Rini <[email protected]>
---
 arch/arm/include/asm/mach-types.h  |   1 +
 board/technexion/tao3530/Makefile  |   5 +
 board/technexion/tao3530/tao3530.c | 170 +++++++++++++++++
 board/technexion/tao3530/tao3530.h | 364 +++++++++++++++++++++++++++++++++++++
 boards.cfg                         |   1 +
 include/configs/tao3530.h          | 310 +++++++++++++++++++++++++++++++
 6 files changed, 851 insertions(+)
 create mode 100644 board/technexion/tao3530/Makefile
 create mode 100644 board/technexion/tao3530/tao3530.c
 create mode 100644 board/technexion/tao3530/tao3530.h
 create mode 100644 include/configs/tao3530.h
arch/arm/include/asm/mach-types.h +1 -0
index 440b041..cb7604a 100644
@@ -470,6 +470,7 @@ extern unsigned int __machine_arch_type;
 #define MACH_TYPE_EUKREA_CPUIMX35SD    2821
 #define MACH_TYPE_EUKREA_CPUIMX51SD    2822
 #define MACH_TYPE_EUKREA_CPUIMX51      2823
+#define MACH_TYPE_OMAP3_TAO3530        2836
 #define MACH_TYPE_SMDKC210             2838
 #define MACH_TYPE_OMAP3_BRAILLO        2839
 #define MACH_TYPE_SPYPLUG              2840
board/technexion/tao3530/Makefile new file +5 -0
new file mode 100644
index 0000000..2aff383
@@ -0,0 +1,5 @@
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-y	:= tao3530.o
board/technexion/tao3530/tao3530.c new file +170 -0

170 lines not on this page · raw message

board/technexion/tao3530/tao3530.h new file +364 -0

364 lines not on this page · raw message

boards.cfg +1 -0
index caba64e..d72be99 100644
@@ -325,6 +325,7 @@ Active  arm         armv7          omap3       logicpd         zoom1
 Active  arm         armv7          omap3       logicpd         zoom2               omap3_zoom2                          -                                                                                                                                 Tom Rix <[email protected]>
 Active  arm         armv7          omap3       matrix_vision   mvblx               omap3_mvblx                          -                                                                                                                                 Michael Jones <[email protected]>
 Active  arm         armv7          omap3       nokia           rx51                nokia_rx51                           -                                                                                                                                 Pali Roh?r <[email protected]>
+Active  arm         armv7          omap3       technexion      tao3530             tao3530                              -                                                                                                                                 Tapani Utriainen <[email protected]>
 Active  arm         armv7          omap3       technexion      twister             twister                              -                                                                                                                                 Stefano Babic <[email protected]>
 Active  arm         armv7          omap3       teejet          mt_ventoux          mt_ventoux                           -                                                                                                                                 Stefano Babic <[email protected]>
 Active  arm         armv7          omap3       ti              am3517crane         am3517_crane                         -                                                                                                                                 Nagendra T S  <[email protected]>
include/configs/tao3530.h new file +310 -0

310 lines not on this page · raw message

Signature · 1 line
1.8.4.3
#1 lore raw

PATCH 2/5 arm: omap3: Add SPL support to tao3530

Add SPL support for the Technexion TAO3530 SOM to replace x-loader. Tested with the Thunder baseboard. Currently this is only tested with the TAO3530 SOM revision (Ax/Bx).

Tested by booting via MMC and NAND.

Cc Tapani Utriainen <[email protected]>
Cc Thorsten Eisbein <[email protected]>
Cc Tom Rini <[email protected]>
---
 board/technexion/tao3530/tao3530.c | 27 +++++++++++++++-
 include/configs/tao3530.h          | 64 ++++++++++++++++++++++++++++++++++++++
 2 files changed, 90 insertions(+), 1 deletion(-)
board/technexion/tao3530/tao3530.c +26 -1
index 9482f35..7cf5aa6 100644
@@ -67,6 +67,31 @@ out:
 	return ret;
 }
 
+#ifdef CONFIG_SPL_BUILD
+/*
+ * Routine: get_board_mem_timings
+ * Description: If we use SPL then there is no x-loader nor config header
+ * so we have to setup the DDR timings ourself on both banks.
+ */
+void get_board_mem_timings(struct board_sdrc_timings *timings)
+{
+	if (tao3530_revision() < 3) {
+		/* 256MB / Bank */
+		timings->mcfg = MCFG(256 << 20, 14);	/* RAS-width 14 */
+		timings->ctrla = HYNIX_V_ACTIMA_165;
+		timings->ctrlb = HYNIX_V_ACTIMB_165;
+	} else {
+		/* 128MB / Bank */
+		timings->mcfg = MCFG(128 << 20, 13);	/* RAS-width 13 */
+		timings->ctrla = MICRON_V_ACTIMA_165;
+		timings->ctrlb = MICRON_V_ACTIMB_165;
+	}
+
+	timings->mr = MICRON_V_MR_165;
+	timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz;
+}
+#endif
+
 /*
  * Routine: board_init
  * Description: Early hardware init.
@@ -134,7 +159,7 @@ void set_muxconf_regs(void)
 	MUX_TAO3530();
 }
 
-#ifdef CONFIG_GENERIC_MMC
+#if defined(CONFIG_GENERIC_MMC) && !defined(CONFIG_SPL_BUILD)
 int board_mmc_init(bd_t *bis)
 {
 	omap_mmc_init(0, 0, 0, -1, -1);
include/configs/tao3530.h +64 -0

74 lines not on this page · raw message

Signature · 1 line
1.8.4.3
#2 lore raw

PATCH 2/5 arm: omap3: Add SPL support to tao3530

SPL works also on TAO-3530 rev Cx (using mmc and Tsunami baseboard).

Quoted 140 lines · On Tue, 12 Nov 2013 13:15:00 +0100 Stefan Roese <[email protected]> wrote:

Add SPL support for the Technexion TAO3530 SOM to replace x-loader. Tested with the Thunder baseboard. Currently this is only tested with the TAO3530 SOM revision (Ax/Bx).

Tested by booting via MMC and NAND.

Cc Tapani Utriainen <[email protected]>
Cc Thorsten Eisbein <[email protected]>
Cc Tom Rini <[email protected]>
---
 board/technexion/tao3530/tao3530.c | 27 +++++++++++++++-
 include/configs/tao3530.h          | 64 ++++++++++++++++++++++++++++++++++++++
 2 files changed, 90 insertions(+), 1 deletion(-)
board/technexion/tao3530/tao3530.c +26 -1
index 9482f35..7cf5aa6 100644
@@ -67,6 +67,31 @@ out:
 	return ret;
 }
 
+#ifdef CONFIG_SPL_BUILD
+/*
+ * Routine: get_board_mem_timings
+ * Description: If we use SPL then there is no x-loader nor config header
+ * so we have to setup the DDR timings ourself on both banks.
+ */
+void get_board_mem_timings(struct board_sdrc_timings *timings)
+{
+	if (tao3530_revision() < 3) {
+		/* 256MB / Bank */
+		timings->mcfg = MCFG(256 << 20, 14);	/* RAS-width 14 */
+		timings->ctrla = HYNIX_V_ACTIMA_165;
+		timings->ctrlb = HYNIX_V_ACTIMB_165;
+	} else {
+		/* 128MB / Bank */
+		timings->mcfg = MCFG(128 << 20, 13);	/* RAS-width 13 */
+		timings->ctrla = MICRON_V_ACTIMA_165;
+		timings->ctrlb = MICRON_V_ACTIMB_165;
+	}
+
+	timings->mr = MICRON_V_MR_165;
+	timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz;
+}
+#endif
+
 /*
  * Routine: board_init
  * Description: Early hardware init.
@@ -134,7 +159,7 @@ void set_muxconf_regs(void)
 	MUX_TAO3530();
 }
 
-#ifdef CONFIG_GENERIC_MMC
+#if defined(CONFIG_GENERIC_MMC) && !defined(CONFIG_SPL_BUILD)
 int board_mmc_init(bd_t *bis)
 {
 	omap_mmc_init(0, 0, 0, -1, -1);
include/configs/tao3530.h +64 -0
index 6327161..03eb85e 100644
@@ -5,6 +5,8 @@
  * Edward Lin <[email protected]>
  * Tapani Utriainen <[email protected]>
  *
+ * Copyright (C) 2013 Stefan Roese <[email protected]>
+ *
  * SPDX-License-Identifier:	GPL-2.0+
  */
 
@@ -307,4 +309,66 @@
 #define CONFIG_USB_STORAGE
 #define CONGIG_CMD_STORAGE
 
+/* Defines for SPL */
+#define CONFIG_SPL
+#define CONFIG_SPL_FRAMEWORK
+#define CONFIG_SPL_NAND_SIMPLE
+
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	0x300 /* address 0x60000 */
+#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS	0x200 /* 256 KB */
+#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION	1
+#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME	"u-boot.img"
+
+#define CONFIG_SPL_BOARD_INIT
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_LIBDISK_SUPPORT
+#define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_MMC_SUPPORT
+#define CONFIG_SPL_FAT_SUPPORT
+#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_SPL_NAND_BASE
+#define CONFIG_SPL_NAND_DRIVERS
+#define CONFIG_SPL_NAND_ECC
+#define CONFIG_SPL_GPIO_SUPPORT
+#define CONFIG_SPL_POWER_SUPPORT
+#define CONFIG_SPL_OMAP3_ID_NAND
+#define CONFIG_SPL_LDSCRIPT		"$(CPUDIR)/omap-common/u-boot-spl.lds"
+
+/* NAND boot config */
+#define CONFIG_SYS_NAND_5_ADDR_CYCLE
+#define CONFIG_SYS_NAND_PAGE_COUNT	64
+#define CONFIG_SYS_NAND_PAGE_SIZE	2048
+#define CONFIG_SYS_NAND_OOBSIZE		64
+#define CONFIG_SYS_NAND_BLOCK_SIZE	(128 * 1024)
+#define CONFIG_SYS_NAND_BAD_BLOCK_POS	NAND_LARGE_BADBLOCK_POS
+/*
+ * Use the ECC/OOB layout from omap_gpmc.h that matches your chip:
+ * SP vs LP, 8bit vs 16bit: GPMC_NAND_HW_ECC_LAYOUT
+ */
+#define CONFIG_SYS_NAND_ECCPOS		{ 2, 3, 4, 5, 6, 7, 8, 9, \
+					 10, 11, 12, 13 }
+#define CONFIG_SYS_NAND_ECCSIZE		512
+#define CONFIG_SYS_NAND_ECCBYTES	3
+
+#define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x80000
+
+#define CONFIG_SPL_TEXT_BASE		0x40200800
+#define CONFIG_SPL_MAX_SIZE		(54 * 1024)	/* 8 KB for stack */
+#define CONFIG_SPL_STACK		LOW_LEVEL_SRAM_STACK
+
+/*
+ * Use 0x80008000 as TEXT_BASE here for compatibility reasons with the
+ * older x-loader implementations. And move the BSS area so that it
+ * doesn't overlap with TEXT_BASE.
+ */
+#define CONFIG_SYS_TEXT_BASE		0x80008000
+#define CONFIG_SPL_BSS_START_ADDR	0x80100000
+#define CONFIG_SPL_BSS_MAX_SIZE		0x80000		/* 512 KB */
+
+#define CONFIG_SYS_SPL_MALLOC_START	0x80208000
+#define CONFIG_SYS_SPL_MALLOC_SIZE	0x100000
+
 #endif /* __CONFIG_H */
#3 lore raw

PATCH 2/5 arm: omap3: Add SPL support to tao3530

In reply to Stefan Roese
Quoted 10 lines · Stefan Roese

Add SPL support for the Technexion TAO3530 SOM to replace x-loader. Tested with the Thunder baseboard. Currently this is only tested with the TAO3530 SOM revision (Ax/Bx).

Tested by booting via MMC and NAND.

Cc Tapani Utriainen <[email protected]>
Cc Thorsten Eisbein <[email protected]>
Cc Tom Rini <[email protected]>

Do we no longer have stack issues that this exposed?

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20131114/87dd9160/attachment.pgp>
#4 lore raw

PATCH 2/5 arm: omap3: Add SPL support to tao3530

Hi Tom,

Quoted 6 lines · Tom Rini
Quoted 4 lines · Stefan Roese

Add SPL support for the Technexion TAO3530 SOM to replace x-loader. Tested with the Thunder baseboard. Currently this is only tested with the TAO3530 SOM revision (Ax/Bx).

Quoted 8 lines
Quoted 6 lines

Tested by booting via MMC and NAND.

Cc Tapani Utriainen <[email protected]>
Cc Thorsten Eisbein <[email protected]>
Cc Tom Rini <[email protected]>

Do we no longer have stack issues that this exposed?

No. Work fine without any further patches applied. I have to admit, that I have no idea why this problem with the re-assignment of r8 seems to be solved. Some for CM_T35 btw.

Thanks,
Stefan

#5 lore raw

PATCH 2/5 arm: omap3: Add SPL support to tao3530

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Quoted 16 lines · Stefan Roese

Hi Tom,

Quoted 13 lines · Tom Rini
Quoted 10 lines · Stefan Roese

Add SPL support for the Technexion TAO3530 SOM to replace x-loader. Tested with the Thunder baseboard. Currently this is only tested with the TAO3530 SOM revision (Ax/Bx).

Tested by booting via MMC and NAND.

<[email protected]> Cc: Thorsten Eisbein
<[email protected]> Cc: Tom Rini
<[email protected]>

Quoted 5 lines
Quoted 1 line

Do we no longer have stack issues that this exposed?

No. Work fine without any further patches applied. I have to admit, that I have no idea why this problem with the re-assignment of r8 seems to be solved. Some for CM_T35 btw.

OK, can you please repost any other older patches from then that need to be applied still? I think I see them all, but I suspect they need Makefile changes anyhow.

- --
Tom
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/

iQIbBAEBAgAGBQJShROZAAoJENk4IS6UOR1Ww+QP9AtCXJcZSVT/7FUzb1RWt+9O 6HfMg7Nu+QPG7xsqh8+Isc7JX+yO0iOtkm273978p6XTUwxq8mGqsaaRioN1xJZ1 xewvTo0B0I2u4nR2DqH1ZQI5CaTrVKWc4Xf/WP7rGOEsGnJCDldkK4aTzCTGA+/y LjZe23D6m0RxJKWuYY+0jC8h21PkpYFD9k+khanNMJ1DlXk4ALh+ExZAkj9iay0H XWJ4RBEL8FOvaAkP8K+zj6en/+dpSHvqOLtvaRS09jQSIeKPQyy1mKOrFHUs4GDN 8IDIxfAq07g/jc52CVEEcFAnCwrmgCKjj9eeVLZRXCCGIo6C3cg0CanahFCiVOAI eXnCi0IY1YQK7I2kNTBxU5crunywL0t59rGNgF5d5OC9qgqnndE4YFUGUYoyMS7a FNxIMIKzv2GQM5vdoVRS5GcQI8KLfIlygPl4M1Xmx3gSKiUU3suxn5MU4MQ7iFZp 2H532WTtZD+rfWZX7Idyb+S/7zpODWsuQBQ4cY8wpmllHntedotohoFTfgQYYu6x Ex1ca9fqusX1Lmmw7a+jEH5ekuGIiKqIeKmy45EKNEdwftf1jz/Mnf98olJ6tU27 VCRO1ICD5IWzEWCZPJ9TdW7DbCPPtmpnN8wr6UlDUl8LxRRfFLKlgH43zix2y6f5 kgp2Spqhm7ILK3MYVFI=
=/cZe
-----END PGP SIGNATURE-----

#6 lore raw

PATCH 2/5 arm: omap3: Add SPL support to tao3530

Quoted 13 lines · Tom Rini
Quoted 13 lines
Quoted 12 lines
Quoted 10 lines

Add SPL support for the Technexion TAO3530 SOM to replace x-loader. Tested with the Thunder baseboard. Currently this is only tested with the TAO3530 SOM revision (Ax/Bx).

Tested by booting via MMC and NAND.

<[email protected]> Cc: Thorsten Eisbein
<[email protected]> Cc: Tom Rini
<[email protected]>

Do we no longer have stack issues that this exposed?

Quoted 7 lines
Quoted 3 lines

No. Work fine without any further patches applied. I have to admit, that I have no idea why this problem with the re-assignment of r8 seems to be solved. Some for CM_T35 btw.

OK, can you please repost any other older patches from then that need to be applied still? I think I see them all, but I suspect they need Makefile changes anyhow.

Yes, they definitely need some massaging. I'll repost the CM_T35 related patches tomorrow as well.

Thanks,
Stefan

#7 lore raw

PATCH 3/5 arm: omap3: Remove bootargs mem_size handling

In reply to Stefan Roese

The memory size is autodetected and is passed to the Linux kernel either via ATAGs or device-tree (dtb). So there is no need to pass it via the bootargs.

Cc Tapani Utriainen <[email protected]>
Cc Thorsten Eisbein <[email protected]>
Cc Tom Rini <[email protected]>
---
 board/technexion/tao3530/tao3530.c | 12 ------------
 include/configs/tao3530.h          |  3 ---
 2 files changed, 15 deletions(-)
board/technexion/tao3530/tao3530.c +0 -12
index 7cf5aa6..f9ea131 100644
@@ -133,18 +133,6 @@ int misc_init_r(void)
 
 	dieid_num_r();
 
-	/* Set memory size environment variable, depending on revision */
-	switch (tao3530_revision()) {
-	case 0x2:  /* Rev C1 -- 256MB */
-		 setenv("mem_size", "mem=256M");
-		 break;
-	case 0x3: /* Rev A2/B2 -- 128MB */
-		 setenv("mem_size", "mem=128M");
-		 break;
-	default:
-		 printf("Warning: Unknown TAO3530 rev, setting mem=128M\n");
-	}
-
 	return 0;
 }
 
include/configs/tao3530.h +0 -3
index 03eb85e..9c8e8cf 100644
@@ -150,21 +150,18 @@
 	"video_mode=omapdss.def_disp=lcd vram=6M omapfb.vram=0:2M,1:2M,2:2M\0" \
 	"lcd_mode=omapfb.mode=lcd:800x480 at 60 \0" \
 	"extra_options= \0" \
-	"mem_size=mem=128M \0" \
 	"mmcdev=0\0" \
 	"mmcroot=/dev/mmcblk0p2 rw\0" \
 	"mmcrootfstype=ext3 rootwait\0" \
 	"nandroot=ubi0:rootfs ubi.mtd=4\0" \
 	"nandrootfstype=ubifs\0" \
 	"mmcargs=setenv bootargs console=${console} " \
-		"${mem_size} " \
 		"mpurate=${mpurate} " \
 		"${video_mode} " \
 		"root=${mmcroot} " \
 		"rootfstype=${mmcrootfstype} " \
 		"${extra_options}\0" \
 	"nandargs=setenv bootargs console=${console} " \
-		"${mem_size} " \
 		"mpurate=${mpurate} " \
 		"${video_mode} " \
 		"${network_setting} " \
Signature · 1 line
1.8.4.3
#8 lore raw

PATCH 4/5 arm: omap3: Add board revision output to tao3530

In reply to Stefan Roese
Cc Tapani Utriainen <[email protected]>
Cc Thorsten Eisbein <[email protected]>
Cc Tom Rini <[email protected]>
---
 board/technexion/tao3530/tao3530.c | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)
board/technexion/tao3530/tao3530.c +17 -0
index f9ea131..2f3f929 100644
@@ -131,6 +131,23 @@ int misc_init_r(void)
 	writel(GPIO31 | GPIO30 | GPIO29 | GPIO28 | GPIO22 | GPIO21 |
 	       GPIO15 | GPIO14 | GPIO13 | GPIO12, &gpio5_base->setdataout);
 
+	switch (tao3530_revision()) {
+	case 0:
+		printf("TAO-3530 REV Reserve 1\n");
+		break;
+	case 1:
+		printf("TAO-3530 REV Reserve 2\n");
+		break;
+	case 2:
+		printf("TAO-3530 REV Cx\n");
+		break;
+	case 3:
+		printf("TAO-3530 REV Ax/Bx\n");
+		break;
+	default:
+		printf("Unknown board revision\n");
+	}
+
 	dieid_num_r();
 
 	return 0;
Signature · 1 line
1.8.4.3
#9 lore raw

PATCH 5/5 arm: omap3: Add HEAD acoustics (HA) board variant omap3_ha to tao3530

In reply to Stefan Roese

The Head acoustics (HA) baseboard used the Technexion TAO3530 SOM and has only some minor differences to the Technexion Thunder baseboard. This patch adds support for this HA baseboard / TAO3530 as the "omap3_ha" build target.

Cc Tapani Utriainen <[email protected]>
Cc Thorsten Eisbein <[email protected]>
Cc Tom Rini <[email protected]>
---
 board/technexion/tao3530/tao3530.c | 15 +++++++++++++++
 board/technexion/tao3530/tao3530.h |  7 +++++++
 boards.cfg                         |  1 +
 3 files changed, 23 insertions(+)
board/technexion/tao3530/tao3530.c +15 -0
index 2f3f929..e829d6f 100644
@@ -75,6 +75,18 @@ out:
  */
 void get_board_mem_timings(struct board_sdrc_timings *timings)
 {
+#if defined(CONFIG_SYS_BOARD_OMAP3_HA)
+	/*
+	 * Switch baseboard LED to red upon power-on
+	 */
+	MUX_OMAP3_HA();
+
+	/* Request a gpio before using it */
+	gpio_request(111, "");
+	/* Sets the gpio as output and its value to 1, switch LED to red */
+	gpio_direction_output(111, 1);
+#endif
+
 	if (tao3530_revision() < 3) {
 		/* 256MB / Bank */
 		timings->mcfg = MCFG(256 << 20, 14);	/* RAS-width 14 */
@@ -162,6 +174,9 @@ int misc_init_r(void)
 void set_muxconf_regs(void)
 {
 	MUX_TAO3530();
+#if defined(CONFIG_SYS_BOARD_OMAP3_HA)
+	MUX_OMAP3_HA();
+#endif
 }
 
 #if defined(CONFIG_GENERIC_MMC) && !defined(CONFIG_SPL_BUILD)
board/technexion/tao3530/tao3530.h +7 -0
index 1ea767d..5c0330c 100644
@@ -9,7 +9,11 @@
 
 const omap3_sysinfo sysinfo = {
 	DDR_STACKED,
+#if defined(CONFIG_SYS_BOARD_OMAP3_HA)
+	"HEAD acoustics OMAP3-HA\n",
+#else
 	"OMAP3 TAO-3530 board",
+#endif
 	"NAND",
 };
 
@@ -361,4 +365,7 @@ const omap3_sysinfo sysinfo = {
 	MUX_VAL(CP(SDRC_CKE0),	(IDIS | PTU | EN  | M0)) \
 	MUX_VAL(CP(SDRC_CKE1),	(IDIS | PTU | EN  | M0))
 
+#define MUX_OMAP3_HA() \
+	MUX_VAL(CP(CAM_XCLKB),	(IDIS | PTD | DIS | M4)) /* GPIO_111 */
+
 #endif
boards.cfg +1 -0
index d72be99..90923db 100644
@@ -325,6 +325,7 @@ Active  arm         armv7          omap3       logicpd         zoom1
 Active  arm         armv7          omap3       logicpd         zoom2               omap3_zoom2                          -                                                                                                                                 Tom Rix <[email protected]>
 Active  arm         armv7          omap3       matrix_vision   mvblx               omap3_mvblx                          -                                                                                                                                 Michael Jones <[email protected]>
 Active  arm         armv7          omap3       nokia           rx51                nokia_rx51                           -                                                                                                                                 Pali Roh?r <[email protected]>
+Active  arm         armv7          omap3       technexion      tao3530             omap3_ha                             tao3530:SYS_BOARD_OMAP3_HA                                                                                                        Stefan Roese <[email protected]>
 Active  arm         armv7          omap3       technexion      tao3530             tao3530                              -                                                                                                                                 Tapani Utriainen <[email protected]>
 Active  arm         armv7          omap3       technexion      twister             twister                              -                                                                                                                                 Stefano Babic <[email protected]>
 Active  arm         armv7          omap3       teejet          mt_ventoux          mt_ventoux                           -                                                                                                                                 Stefano Babic <[email protected]>
Signature · 1 line
1.8.4.3
#10 lore raw

PATCH 1/5 arm, omap3: Add support for TechNexion modules

In reply to Stefan Roese
Quoted 8 lines · Stefan Roese

From: Tapani Utriainen <[email protected]>

Add support for TechNexion TAO3530 SoM

This patch has been posted quite a long time ago. I ported it to the latest mainline U-Boot version. With some additional cleanup and enhancements.

Quoted 5 lines
CC Sandeep Paulraj <[email protected]>
Cc Thorsten Eisbein <[email protected]>
Cc Tom Rini <[email protected]>

Sorry for taking so long to get back to this, and I was going to just fixup a few things, until I got farther into the series:

arch/arm/include/asm/mach-types.h extern unsigned int __machine_arch_type; · line 476

Quoted 12 lines
arch/arm/include/asm/mach-types.h +1 -0
index 440b041..cb7604a 100644
@@ -470,6 +470,7 @@ extern unsigned int __machine_arch_type;
 #define MACH_TYPE_EUKREA_CPUIMX35SD    2821
 #define MACH_TYPE_EUKREA_CPUIMX51SD    2822
 #define MACH_TYPE_EUKREA_CPUIMX51      2823
+#define MACH_TYPE_OMAP3_TAO3530        2836
 #define MACH_TYPE_SMDKC210             2838
 #define MACH_TYPE_OMAP3_BRAILLO        2839
 #define MACH_TYPE_SPYPLUG              2840

Put this into the config file until we re-sync mach-types.h, IF you need to suppot non-DT booting kernels.

board/technexion/tao3530/Makefile

Quoted 5 lines
board/technexion/tao3530/Makefile new file +0 -0
new file mode 100644
index 0000000..2aff383

This needs to be re-written now.

board/technexion/tao3530/Makefile

Quoted 1 line
board/technexion/tao3530/Makefile new file +1 -0
+		printf("Error? GPIO 65 not available\n");

Here and elsewhere, printf without formatting chars should be puts.

board/technexion/tao3530/Makefile

Quoted 11 lines
board/technexion/tao3530/Makefile new file +11 -0
+	/* Set memory size environment variable, depending on revision */
+	switch (tao3530_revision()) {
+	case 0x2:  /* Rev C1 -- 256MB */
+		 setenv("mem_size", "mem=256M");
+		 break;
+	case 0x3: /* Rev A2/B2 -- 128MB */
+		 setenv("mem_size", "mem=128M");
+		 break;
+	default:
+		 printf("Warning: Unknown TAO3530 rev, setting mem=128M\n");
+	}

This hunk gets dropped in a later patch, just fixup/squash it in. The other patches that do similar things too.

board/technexion/tao3530/Makefile

Quoted 4 lines
board/technexion/tao3530/Makefile new file +4 -0
+#define CONFIG_ARMV7			/* This is an ARM V7 CPU core */
+#define CONFIG_OMAP34XX			/* which is a 34XX */
+#define CONFIG_OMAP3430			/* which is in a 3430 */
+#define CONFIG_OMAP3_TAO3530		/* working with TAO-3530 */

Unused.

Quoted 1 line

+#undef CONFIG_USE_IRQ /* no support for IRQs */

... so don't #undef it please, it's never being set.

board/technexion/tao3530/Makefile

Quoted 2 lines
board/technexion/tao3530/Makefile new file +2 -0
+#define CONFIG_SYS_BAUDRATE_TABLE	{4800, 9600, 19200, 38400, 57600,\
+					115200}

Please use the default table then.

Quoted 1 line

+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "

No need to set this.

board/technexion/tao3530/Makefile

Quoted 2 lines
board/technexion/tao3530/Makefile new file +2 -0
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_AUTOCOMPLETE

One of these is needed, not both.

board/technexion/tao3530/Makefile

Quoted 4 lines
board/technexion/tao3530/Makefile new file +4 -0
+#define CONFIG_SYS_MEMTEST_START	(OMAP34XX_SDRC_CS0)	/* memtest */
+								/* works on */
+#define CONFIG_SYS_MEMTEST_END		(OMAP34XX_SDRC_CS0 + \
+					0x01F00000) /* 31MB */

Please see doc/README.memory-test

And please compare with omap3_beagle.h and similar, I think there's a few other style things that have changed since when this file was first done. Thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20131203/3f90e7be/attachment.pgp>