Skip to contentSkip to conversation

powerpc/powernv: Plumb fsp memory errors to memory poison infrastructure.

PATCH New Mahesh J Salgaonkar 1 participant 3 messages Nov 15, 2013 PowerPC

lore
Share & tools
lore
#0 lore raw

cover powerpc/powernv: Plumb fsp memory errors to memory poison infrastructure.

Hi,

Please find the patch set that implements FSP memory error handling and plumbs then into memory poison infrastructure.

Patch 1 enables the generic memory hwpoisoning infrastructure for ppc64. Patch 2 reads the memory errors reported from opal layer and plumbs them into memory poison infrastructure.

This patch uses new messaging channel infrastructure (proposed through a separate patch at
https://lists.ozlabs.org/pipermail/linuxppc-dev/2013-November/113331.html)
to pull the fsp memory errors to linux.

Thanks,
-Mahesh.
---

Mahesh Salgaonkar (2):
powerpc/powernv: Add config option for hwpoisoning.
powerpc/powernv: Get FSP memory errors and plumb into memory poison infrastructure.

 arch/powerpc/Kconfig                               |    6 +
 arch/powerpc/include/asm/opal.h                    |   52 +++++++
 arch/powerpc/platforms/powernv/Makefile            |    1 
 .../powerpc/platforms/powernv/opal-memory-errors.c |  146 ++++++++++++++++++++
 4 files changed, 205 insertions(+)
 create mode 100644 arch/powerpc/platforms/powernv/opal-memory-errors.c
Signature · 1 line
-Mahesh
#1 lore raw

PATCH 1/2 powerpc/powernv: Add config option for hwpoisoning.

From: Mahesh Salgaonkar <[email protected]>

Add config option to enable generic memory hwpoisoning infrastructure for ppc64.

---
 arch/powerpc/Kconfig |    6 ++++++
 1 file changed, 6 insertions(+)
arch/powerpc/Kconfig +6 -0
index 38f3b7e..4690f5a 100644
@@ -375,6 +375,12 @@ config ARCH_HAS_WALK_MEMORY
 config ARCH_ENABLE_MEMORY_HOTREMOVE
 	def_bool y
 
+config PPC64_SUPPORTS_MEMORY_FAILURE
+	bool "Add support for memory hwpoison"
+	depends on PPC_BOOK3S_64
+	default "y" if PPC_POWERNV
+	select ARCH_SUPPORTS_MEMORY_FAILURE
+
 config KEXEC
 	bool "kexec system call"
 	depends on (PPC_BOOK3S || FSL_BOOKE || (44x && !SMP))
#2 lore raw

PATCH 2/2 powerpc/powernv: Get FSP memory errors and plumb into memory poison infrastructure.

In reply to Mahesh J Salgaonkar

From: Mahesh Salgaonkar <[email protected]>

Get the memory errors reported by opal and plumb it into memory poison infrastructure. This patch uses new messaging channel infrastructure to pull the fsp memory errors to linux.

---
 arch/powerpc/include/asm/opal.h                    |   52 +++++++
 arch/powerpc/platforms/powernv/Makefile            |    1 
 .../powerpc/platforms/powernv/opal-memory-errors.c |  146 ++++++++++++++++++++
 3 files changed, 199 insertions(+)
 create mode 100644 arch/powerpc/platforms/powernv/opal-memory-errors.c
arch/powerpc/include/asm/opal.h +52 -0
index 3de7ac6..5fe041c 100644
@@ -418,6 +418,58 @@ struct opal_machine_check_event {
 	} u;
 };
 
+/* FSP memory errors handling */
+enum OpalMemErr_Version {
+	OpalMemErr_V1 = 1,
+};
+
+enum OpalMemErrType {
+	OPAL_MEM_ERR_TYPE_RESILIENCE	= 0,
+	OPAL_MEM_ERR_TYPE_DYN_DALLOC,
+	OPAL_MEM_ERR_TYPE_SCRUB,
+};
+
+/* Memory Reilience error type */
+enum OpalMemErr_ResilErrType {
+	OPAL_MEM_RESILIENCE_CE		= 0,
+	OPAL_MEM_RESILIENCE_UE,
+	OPAL_MEM_RESILIENCE_UE_SCRUB,
+};
+
+/* Dynamic Memory Deallocation type */
+enum OpalMemErr_DynErrType {
+	OPAL_MEM_DYNAMIC_DEALLOC	= 0,
+};
+
+/* OpalMemoryErrorData->flags */
+#define OPAL_MEM_CORRECTED_ERROR	0x0001
+#define OPAL_MEM_THRESHOLD_EXCEEDED	0x0002
+#define OPAL_MEM_ACK_REQUIRED		0x8000
+
+struct OpalMemoryErrorData {
+	enum OpalMemErr_Version	version:8;	/* 0x00 */
+	enum OpalMemErrType	type:8;		/* 0x01 */
+	uint16_t		flags;		/* 0x02 */
+	uint8_t			reserved_1[4];	/* 0x04 */
+
+	union {
+		/* Memory Resilience corrected/uncorrected error info */
+		struct {
+			enum OpalMemErr_ResilErrType resil_err_type:8;
+			uint8_t		reserved_1[7];
+			uint64_t	physical_address_start;
+			uint64_t	physical_address_end;
+		} resilience;
+		/* Dynamic memory deallocation error info */
+		struct {
+			enum OpalMemErr_DynErrType dyn_err_type:8;
+			uint8_t		reserved_1[7];
+			uint64_t	physical_address_start;
+			uint64_t	physical_address_end;
+		} dyn_dealloc;
+	} u;
+};
+
 enum {
 	OPAL_P7IOC_DIAG_TYPE_NONE	= 0,
 	OPAL_P7IOC_DIAG_TYPE_RGC	= 1,
arch/powerpc/platforms/powernv/Makefile +1 -0
index 300c437..0a57286 100644
@@ -4,3 +4,4 @@ obj-y			+= opal-rtc.o opal-nvram.o opal-lpc.o
 obj-$(CONFIG_SMP)	+= smp.o
 obj-$(CONFIG_PCI)	+= pci.o pci-p5ioc2.o pci-ioda.o
 obj-$(CONFIG_EEH)	+= eeh-ioda.o eeh-powernv.o
+obj-$(CONFIG_MEMORY_FAILURE)	+= opal-memory-errors.o
arch/powerpc/platforms/powernv/opal-memory-errors.c new file +146 -0

146 lines not on this page · raw message