Skip to contentSkip to conversation

kexec/ppc64: bring up new ppc64le architecture

PATCH In review Laurent Dufour 2 participants 3 messages Nov 15, 2013 – Nov 20, 2013

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 kexec/ppc64: bring up new ppc64le architecture

This patch provides support for the new Power PC litte endian (LE) mode. The LE mode only differs in the way the instructions and data are stored in memory thus there is no real need to duplicate the ppc64 code.

However some compilation's options, especially for the purgatory, differ between little and big endian mode's support. A new "SUBARCH" build variable is introduced which is currently only used for PPC64 to specify the endianness.

Another set of changes in this patch is fixing minor endianess issues in the ppc64 code and fix an alignment issue raised on Power7 little endian mode. Among these fixes, the check on the kernel binary endianess is removed, since we can imagine kexecing a LE kernel from a BE environment, as far as the specified root filesystem and initrd file are containing the right binaries.

This patch depends on the patch "kexec/ppc64: use common architecture fs2dt.c file" I sent earlier on the kexec mailing list.

---
 Makefile.in                            |    1 +
 config/config.guess                    |    5 ++++-
 configure.ac                           |    6 ++++++
 kexec/arch/ppc64/kexec-elf-ppc64.c     |    6 +++---
 kexec/arch/ppc64/kexec-elf-rel-ppc64.c |    3 ---
 kexec/arch/ppc64/kexec-ppc64.c         |    3 +++
 purgatory/arch/ppc64/Makefile          |    8 +++++++-
 purgatory/arch/ppc64/v2wrap.S          |    1 +
 8 files changed, 25 insertions(+), 8 deletions(-)
Makefile.in +1 -0
index c1859d1..54c206f 100644
@@ -22,6 +22,7 @@ includedir	= @includedir@
 
 # The target architecture
 ARCH		= @ARCH@
+SUBARCH		= @SUBARCH@
 OBJDIR		= @OBJDIR@
 target		= @target@
 host		= @host@
config/config.guess +4 -1
index d622a44..c954d5e 100755
@@ -4,7 +4,7 @@
 #   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010,
 #   2011, 2012 Free Software Foundation, Inc.
 
-timestamp='2012-02-10'
+timestamp='2013-10-21'
 
 # This file is free software; you can redistribute it and/or modify it
 # under the terms of the GNU General Public License as published by
@@ -972,6 +972,9 @@ EOF
     ppc64:Linux:*:*)
 	echo powerpc64-unknown-linux-gnu
 	exit ;;
+    ppc64le:Linux:*:*)
+	echo powerpc64le-unknown-linux-gnu
+	exit ;;
     ppc:Linux:*:*)
 	echo powerpc-unknown-linux-gnu
 	exit ;;
configure.ac +6 -0
index 7b61dbf..76126cc 100644
@@ -29,6 +29,11 @@ case $target_cpu in
 		;;
 	powerpc64 )
 		ARCH="ppc64"
+		SUBARCH="BE"
+		;;
+	powerpc64le )
+		ARCH="ppc64"
+		SUBARCH="LE"
 		;;
 	arm* )
 		ARCH="arm"
@@ -197,6 +202,7 @@ AC_SUBST([TARGET_CFLAGS])
 AC_SUBST([ASFLAGS])
 
 AC_SUBST([ARCH])
+AC_SUBST([SUBARCH])
 AC_SUBST([OBJDIR])
 AC_SUBST([INSTALL])
 
kexec/arch/ppc64/kexec-elf-ppc64.c +3 -3
index 3550fc1..7d49d8a 100644
@@ -237,13 +237,13 @@ int elf_ppc64_load(int argc, char **argv, const char *buf, off_t len,
 	 * entry is before this one
 	 */
 	bb_ptr = (struct bootblock *)(seg_buf);
-	rsvmap_ptr = (uint64_t *)(seg_buf + bb_ptr->off_mem_rsvmap);
+	rsvmap_ptr = (uint64_t *)(seg_buf + be32_to_cpu(bb_ptr->off_mem_rsvmap));
 	while (*rsvmap_ptr || *(rsvmap_ptr+1))
 		rsvmap_ptr += 2;
 	rsvmap_ptr -= 2;
-	*rsvmap_ptr = my_dt_offset;
+	*rsvmap_ptr = cpu_to_be64(my_dt_offset);
 	rsvmap_ptr++;
-	*rsvmap_ptr = bb_ptr->totalsize;
+	*rsvmap_ptr = cpu_to_be64((uint64_t)be32_to_cpu(bb_ptr->totalsize));
 #endif
 
 	/* Set kernel */
kexec/arch/ppc64/kexec-elf-rel-ppc64.c +0 -3
index 54d506a..5fc2f87 100644
@@ -7,9 +7,6 @@
 
 int machine_verify_elf_rel(struct mem_ehdr *ehdr)
 {
-	if (ehdr->ei_data != ELFDATA2MSB) {
-		return 0;
-	}
 	if (ehdr->ei_class != ELFCLASS64) {
 		return 0;
 	}
kexec/arch/ppc64/kexec-ppc64.c +3 -0
index 21bd0a8..af9112b 100644
@@ -532,6 +532,7 @@ static int get_devtree_details(unsigned long kexec_flags)
 				perror(fname);
 				goto error_openfile;
 			}
+			rtas_base = be32_to_cpu(rtas_base);
 			memset(fname, 0, sizeof(fname));
 			strcpy(fname, device_tree);
 			strcat(fname, dentry->d_name);
@@ -545,6 +546,7 @@ static int get_devtree_details(unsigned long kexec_flags)
 				goto error_openfile;
 			}
 			closedir(cdir);
+			rtas_size = be32_to_cpu(rtas_size);
 			/* Add rtas to exclude_range */
 			exclude_range[i].start = rtas_base;
 			exclude_range[i].end = rtas_base + rtas_size;
@@ -798,6 +800,7 @@ const struct arch_map_entry arches[] = {
 	 * So pass KEXEC_ARCH_PPC64 here
 	 */
 	{ "ppc64", KEXEC_ARCH_PPC64 },
+	{ "ppc64le", KEXEC_ARCH_PPC64 },
 	{ NULL, 0 },
 };
 
purgatory/arch/ppc64/Makefile +7 -1
index 67f41ae..6f6716e 100644
@@ -11,7 +11,13 @@ ppc64_PURGATORY_SRCS += purgatory/arch/ppc64/misc.S
 
 ppc64_PURGATORY_EXTRA_CFLAGS += -m64 -mcall-aixdesc -msoft-float
 ppc64_PURGATORY_EXTRA_ASFLAGS += -m64 -mcall-aixdesc
-ppc64_PURGATORY_EXTRA_LDFLAGS += -melf64ppc
+ifeq ($(SUBARCH),BE)
+	ppc64_PURGATORY_EXTRA_LDFLAGS += -melf64ppc
+else
+	ppc64_PURGATORY_EXTRA_LDFLAGS += -melf64lppc
+	ppc64_PURGATORY_EXTRA_CFLAGS += -mlittle-endian
+	ppc64_PURGATORY_EXTRA_ASFLAGS += -mlittle-endian
+endif
 
 dist += purgatory/arch/ppc64/Makefile $(ppc64_PURGATORY_SRCS)		\
 	purgatory/arch/ppc64/hvCall.h					\
purgatory/arch/ppc64/v2wrap.S +1 -0
index 3f78620..16fb63d 100644
@@ -46,6 +46,7 @@
 	ori     rn,rn,name##@l
 
 	.machine ppc64
+	.align 8
 	.globl purgatory_start
 purgatory_start:	b	master
 	.org purgatory_start + 0x5c     # ABI: possible run_at_load flag at 0x5c

_______________________________________________
kexec mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/kexec

#1 lore raw
Quoted 16 lines · Laurent Dufour

This patch provides support for the new Power PC litte endian (LE) mode. The LE mode only differs in the way the instructions and data are stored in memory thus there is no real need to duplicate the ppc64 code.

However some compilation's options, especially for the purgatory, differ between little and big endian mode's support. A new "SUBARCH" build variable is introduced which is currently only used for PPC64 to specify the endianness.

Another set of changes in this patch is fixing minor endianess issues in the ppc64 code and fix an alignment issue raised on Power7 little endian mode. Among these fixes, the check on the kernel binary endianess is removed, since we can imagine kexecing a LE kernel from a BE environment, as far as the specified root filesystem and initrd file are containing the right binaries.

Quoted 4 lines

This patch depends on the patch "kexec/ppc64: use common architecture fs2dt.c file" I sent earlier on the kexec mailing list.

Hi Laurent,

I have applied this. But could you let me know how to (cross) compile it?

_______________________________________________
kexec mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/kexec

#2 lore raw
Quoted 17 lines · Simon Horman
Quoted 16 lines · Laurent Dufour

This patch provides support for the new Power PC litte endian (LE) mode. The LE mode only differs in the way the instructions and data are stored in memory thus there is no real need to duplicate the ppc64 code.

However some compilation's options, especially for the purgatory, differ between little and big endian mode's support. A new "SUBARCH" build variable is introduced which is currently only used for PPC64 to specify the endianness.

Another set of changes in this patch is fixing minor endianess issues in the ppc64 code and fix an alignment issue raised on Power7 little endian mode. Among these fixes, the check on the kernel binary endianess is removed, since we can imagine kexecing a LE kernel from a BE environment, as far as the specified root filesystem and initrd file are containing the right binaries.

Quoted 8 lines
Quoted 4 lines

This patch depends on the patch "kexec/ppc64: use common architecture fs2dt.c file" I sent earlier on the kexec mailing list.

Hi Laurent,

I have applied this. But could you let me know how to (cross) compile it?

Hi Simon,

Thanks for applying the patches.

I didn't use the cross the compilation mechanism. I tried to make it run but I faced some issues and looking at the Makefile, especially the kexec/Makefile file it doesn't look to be designed to do cross compilation since there is no reference to TARGET_CC. May be I didn't use it in the right way. If you have any tips on that...

I did my builds and tests using a qemu guest and KVM running ppc64 LE binaries since currently there is no other way to run a Power in little endian mode.

Unfortunately, such a root file system image is not currently available outside of IBM and the Open Power's partners. Despite must of the patch have been pushed to the community, I'm sorry to not being allowed to provide you with a root file system image with LE binaries. Be sure I'd do otherwise.

Theoretically all the parts needed to build a PPC64 LE rootfs are available, binutils/gcc/glibc/buildroot, but that's a lot of effort.

Please note that the PPC64 LE support is still a moving target, and an ABI change is about to be released which would imply a massive rebuild. I hope once this will be done this will be easier to get LE root file system outside of IBM.

Cheers,
Laurent.

_______________________________________________
kexec mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/kexec