ath10k: don't show MSI registration warnings
PATCH 1/3 ath10k: don't show MSI registration warnings
Convert the MSI failure warnings to a debug message to make them less spammy. Also convert the irq mode printout to a single print to make it easier to show it only once.
Signed-off-by Kalle Valo <[email protected]>
--- drivers/net/wireless/ath/ath10k/pci.c | 26 ++++++++++++++++++++------ 1 file changed, 20 insertions(+), 6 deletions(-)
drivers/net/wireless/ath/ath10k/pci.c +20 -6
@@ -1851,6 +1851,7 @@ static void ath10k_pci_start_bmi(struct ath10k *ar)static int ath10k_pci_hif_power_up (struct ath10k *ar) {struct ath10k_pci *ar_pci =ath10k_pci_priv (ar); +const char *irq_mode;int ret;/*
@@ -1916,6 +1917,16 @@ static int ath10k_pci_hif_power_up(struct ath10k *ar) }ath10k_pci_start_bmi (ar); + +if (ar_pci->num_msi_intrs >1 ) + irq_mode ="MSI-X" ; +else if (ar_pci->num_msi_intrs ==1 ) + irq_mode ="MSI" ; +else + irq_mode ="legacy" ; + +ath10k_info ("pci irq %s\n" , irq_mode); +return 0 ; err_irq:
@@ -2161,7 +2172,8 @@ static int ath10k_pci_start_intr_msix(struct ath10k *ar, int num) } } -ath10k_info ("MSI-X interrupt handling (%d intrs)\n" , num); +ath10k_dbg (ATH10K_DBG_BOOT , +"MSI-X interrupt handling (%d intrs)\n" , num);return 0 ; }
@@ -2182,7 +2194,7 @@ static int ath10k_pci_start_intr_msi(struct ath10k *ar)return ret; } -ath10k_info ("MSI interrupt handling\n" ); +ath10k_dbg (ATH10K_DBG_BOOT ,"MSI interrupt handling\n" );return 0 ; }
@@ -2218,7 +2230,7 @@ static int ath10k_pci_start_intr_legacy(struct ath10k *ar) PCIE_INTR_ENABLE_ADDRESS));ath10k_pci_sleep (ar); -ath10k_info ("legacy interrupt handling\n" ); +ath10k_dbg (ATH10K_DBG_BOOT ,"legacy interrupt handling\n" );return 0 ; }
@@ -2248,7 +2260,8 @@ static int ath10k_pci_start_intr(struct ath10k *ar)if (ret ==0 ) goto exit; -ath10k_warn ("MSI-X didn't succeed (%d), trying MSI\n" , ret); +ath10k_dbg (ATH10K_DBG_BOOT , +"MSI-X didn't succeed (%d), trying MSI\n" , ret); num =1 ; }
@@ -2257,8 +2270,9 @@ static int ath10k_pci_start_intr(struct ath10k *ar)if (ret ==0 ) goto exit; -ath10k_warn ("MSI didn't succeed (%d), trying legacy INTR\n" , - ret); +ath10k_dbg (ATH10K_DBG_BOOT , +"MSI didn't succeed (%d), trying legacy INTR\n" , + ret); num =0 ; }
PATCH 2/3 ath10k: make core boot messages more compact
We can show the same amount of information in one line. And then it's easier to show this information only during first firmware boot (see next patch).
For UART printouts there's already a message when they are enabled so no need to have a print when they are disabled, that's the default anyway.
Signed-off-by Kalle Valo <[email protected]>
--- drivers/net/wireless/ath/ath10k/core.c | 16 ++++++++++------ drivers/net/wireless/ath/ath10k/htt.c | 4 ++-- 2 files changed, 12 insertions(+), 8 deletions(-)
drivers/net/wireless/ath/ath10k/core.c +10 -6
@@ -597,10 +597,8 @@ static int ath10k_init_uart(struct ath10k *ar)return ret; } -if (!uart_print) { -ath10k_info ("UART prints disabled\n" ); +if (!uart_print)return 0 ; - } ret =ath10k_bmi_write32 (ar, hi_dbg_uart_txpin,7 );if (ret) {
@@ -645,8 +643,8 @@ static int ath10k_init_hw_params(struct ath10k *ar) ar->hw_params = *hw_params; -ath10k_info ("Hardware name %s version 0x%x\n" , - ar->hw_params.name, ar->target_version); +ath10k_dbg (ATH10K_DBG_BOOT ,"Hardware name %s version 0x%x\n" , + ar->hw_params.name, ar->target_version);return 0 ; }
@@ -807,7 +805,8 @@ int ath10k_core_start(struct ath10k *ar)if (status) goto err_htt_detach; -ath10k_info ("firmware %s booted\n" , ar->hw->wiphy->fw_version); +ath10k_dbg (ATH10K_DBG_BOOT ,"firmware %s booted\n" , + ar->hw->wiphy->fw_version); status =ath10k_wmi_cmd_init (ar);if (status) {
@@ -833,6 +832,11 @@ int ath10k_core_start(struct ath10k *ar) ar->free_vdev_map = (1 <<TARGET_NUM_VDEVS ) -1 ;INIT_LIST_HEAD (&ar->arvifs); +ath10k_info ("%s (0x%x) fw %s api %d htt %d.%d\n" , + ar->hw_params.name, ar->target_version, + ar->hw->wiphy->fw_version, ar->fw_api, + ar->htt.target_version_major, ar->htt.target_version_minor); +return 0 ; err_disconnect_htc:
drivers/net/wireless/ath/ath10k/htt.c +2 -2
@@ -104,8 +104,8 @@ err_htc_attach:static int ath10k_htt_verify_version (struct ath10k_htt *htt) { -ath10k_info ("htt target version %d.%d\n" , - htt->target_version_major, htt->target_version_minor); +ath10k_dbg (ATH10K_DBG_BOOT ,"htt target version %d.%d\n" , + htt->target_version_major, htt->target_version_minor);if (htt->target_version_major !=2 && htt->target_version_major !=3 ) {
PATCH 3/3 ath10k: show hardware and firmware info prints only once
In reply to Kalle ValoThis makes ath10k a lot less spammy by default.
Signed-off-by Kalle Valo <[email protected]>
--- drivers/net/wireless/ath/ath10k/core.c | 12 ++++++++---- drivers/net/wireless/ath/ath10k/core.h | 1 + drivers/net/wireless/ath/ath10k/pci.c | 4 +++- 3 files changed, 12 insertions(+), 5 deletions(-)
drivers/net/wireless/ath/ath10k/core.c +8 -4
@@ -832,10 +832,14 @@ int ath10k_core_start(struct ath10k *ar) ar->free_vdev_map = (1 <<TARGET_NUM_VDEVS ) -1 ;INIT_LIST_HEAD (&ar->arvifs); -ath10k_info ("%s (0x%x) fw %s api %d htt %d.%d\n" , - ar->hw_params.name, ar->target_version, - ar->hw->wiphy->fw_version, ar->fw_api, - ar->htt.target_version_major, ar->htt.target_version_minor); +if (!test_bit (ATH10K_FLAG_FIRST_BOOT_DONE , &ar->dev_flags)) +ath10k_info ("%s (0x%x) fw %s api %d htt %d.%d\n" , + ar->hw_params.name, ar->target_version, + ar->hw->wiphy->fw_version, ar->fw_api, + ar->htt.target_version_major, + ar->htt.target_version_minor); + +__set_bit (ATH10K_FLAG_FIRST_BOOT_DONE , &ar->dev_flags);return 0 ;
drivers/net/wireless/ath/ath10k/core.h +1 -0
@@ -313,6 +313,7 @@ enum ath10k_fw_features {enum ath10k_dev_flags {/* Indicates that ath10k device is during CAC phase of DFS */ ATH10K_CAC_RUNNING , +ATH10K_FLAG_FIRST_BOOT_DONE , };struct ath10k {
drivers/net/wireless/ath/ath10k/pci.c +3 -1
@@ -19,6 +19,7 @@#include <linux/module.h> #include <linux/interrupt.h> #include <linux/spinlock.h> +#include <linux/bitops.h> #include "core.h" #include "debug.h"
@@ -1925,7 +1926,8 @@ static int ath10k_pci_hif_power_up(struct ath10k *ar)else irq_mode ="legacy" ; -ath10k_info ("pci irq %s\n" , irq_mode); +if (!test_bit (ATH10K_FLAG_FIRST_BOOT_DONE , &ar->dev_flags)) +ath10k_info ("pci irq %s\n" , irq_mode);return 0 ;