Skip to contentSkip to conversation

Which u-boot tree to start for dra7xx_evm

U-Boot Richard Retanubun 2 participants 2 messages Nov 21, 2013

lore
Share & tools
lore
#0 lore raw

Hi Tom,

Sorry to keep bugging you today.

I was just informed by one of my colleagues that there are another ti uboot git tree

So out of these three:
[1] http://git.omapzoom.org/?p=repo/u-boot.git;a=shortlog;h=refs/heads/p-ti-u-boot-2013.04
[2] http://git.ti.com/ti-u-boot/ti-u-boot/commits/ti-u-boot-2013.10
[3] denx's master

Which one should we use if we want to get as close to mainline with dra7xx_evm capable of booting from eMMC in RAW mode?

Our eval platform comes with sources from [1] and boots all the way to the linux. The ones built from [2] or [3] are not booting into the linux in the uSD.

it errors out like this:

U-Boot 2013.10-00095-g996f0c4 (Nov 21 2013 - 19:53:47)

CPU  : DRA752 ES1.0
Board: DRA7xx
I2C:   ready
DRAM:  1.5 GiB
MMC:   OMAP SD/MMC: 0, OMAP SD/MMC: 1

Using default environment

SATA link 0 timeout.
AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
flags: 64bit ncq stag pm led clo only pmp pio slum part ccc apst scanning bus for devices...
Found 0 device(s).
Net: <ethaddr> not set. Validating first E-fuse MAC
cpsw
Hit any key to stop autoboot: 0
mmc0 is current device
SD/MMC found on device 0
reading uEnv.txt
** Unable to read file uEnv.txt **
** File not found /boot/zImage **
mmc1(part 0) is current device
SD/MMC found on device 1
** Unrecognized filesystem type **
** No partition table - mmc 1 **

If it is a matter of porting some patches, we are willing to help test and mainline if it means we can get denx-master for dra7xx working.

Thanks for your time, Tom.

Signature · 1 line
-- Richard Retanubun
#1 lore raw
Quoted 47 lines · Richard Retanubun

Hi Tom,

Sorry to keep bugging you today.

I was just informed by one of my colleagues that there are another ti uboot git tree

So out of these three:
[1] http://git.omapzoom.org/?p=repo/u-boot.git;a=shortlog;h=refs/heads/p-ti-u-boot-2013.04
[2] http://git.ti.com/ti-u-boot/ti-u-boot/commits/ti-u-boot-2013.10
[3] denx's master

Which one should we use if we want to get as close to mainline with dra7xx_evm capable of booting from eMMC in RAW mode?

Our eval platform comes with sources from [1] and boots all the way to the linux. The ones built from [2] or [3] are not booting into the linux in the uSD.

it errors out like this:

U-Boot 2013.10-00095-g996f0c4 (Nov 21 2013 - 19:53:47)

CPU  : DRA752 ES1.0
Board: DRA7xx
I2C:   ready
DRAM:  1.5 GiB
MMC:   OMAP SD/MMC: 0, OMAP SD/MMC: 1

Using default environment

SATA link 0 timeout.
AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
flags: 64bit ncq stag pm led clo only pmp pio slum part ccc apst scanning bus for devices...
Found 0 device(s).
Net: <ethaddr> not set. Validating first E-fuse MAC
cpsw
Hit any key to stop autoboot: 0
mmc0 is current device
SD/MMC found on device 0
reading uEnv.txt
** Unable to read file uEnv.txt **
** File not found /boot/zImage **
mmc1(part 0) is current device
SD/MMC found on device 1
** Unrecognized filesystem type **
** No partition table - mmc 1 **

Quoted 2 lines

If it is a matter of porting some patches, we are willing to help test and mainline if it means we can get denx-master for dra7xx working.

So, from the log above I assume that's the ti-u-boot-2013.10 tree, as that as SATA patches that will be merged into mainline soon. From the
[1] tree, stop the boot process and printenv bootcmd, and copy that info over (or see what their include/configs/dra7xx_evm.h says the bootcmd is) as the error you show is just that the default location for the kernel isn't correct with the Android rootfs you're using. Mainline also doesn't have CONFIG_EFI_PARTITION set which is why it can't read the partition table. That's an easy patch to make and post :)

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20131121/7065e770/attachment.pgp>