ARM: shmobile: r8a7779, marzen: multiplatform
Subsystems (6)
cover ARM: shmobile: r8a7779, marzen: multiplatform
The aim of this series is to adding common clock framework and in turn multiplatform support to the r8a7779 SoC and marzen-reference. It subsequently removes non-multiplatform support from marzen-reference. This last step is provided to illustrate that it can be done, it may not be desirable to do so for some time.
This is based on work for R-Car Gen2 by Laurent Pinchart and Magnus Damm.
I expect the R-Car Gen2 work in this area to change and I intend to update this series as necessary.
This series is based on the clocks/ccf/rcar-gen2 branch of Laurent's fbdev tree. I expect that branch to be rebased/changed, but it seems to be an adequate base for an RFC.
I have made this series, including its base, available in the topic/clocks/ccf/r8a7779-marzen branch of my renesas tree. That branch is likely to be rebased/changed in the future.
Simon Horman (17):
clk: shmobile: r8a7779: Add clocks support
clk: shmobile: r8a7779: Add MSTP clock support
ARM: shmobile: r8a7779: Add clock index macros for DT sources
ARM: shmobile: r8a7779: Add clocks
ARM: shmobile: r8a7779: Reference clocks
ARM: shmobile: Sync Marzen DTS with Marzen reference DTS
ARM: shmobile: r8a7779: Sort headers alphabetically
ARM: shmobile: r8a7779: Add helper to read mode pins
ARM: shmobile: r8a7779: Move r8a7779_earlytimer_init to
clock-r8a7779.c
ARM: shmobile: marzen-reference: Move clock and OF device
initialisation into board code
ARM: shmobile: r8a7779: Do not include sh_clk.h in r8a7779.h
ARM: shmobile: r8a7779: Initial multiplatform support
ARM: shmobile: marzen-reference: Initialize CPG device
ARM: shmobile: marzen-reference: Instantiate clkdevs for SCIF and CMT
ARM: shmobile: Remove non-multiplatform Marzen reference support
ARM: shmobile: Let Marzen multiplatform boot with Marzen DTB
ARM: shmobile: Remove Marzen reference DTS
.../bindings/clock/renesas,cpg-mstp-clocks.txt | 1 + .../bindings/clock/renesas,r8a7779-cpg-clocks.txt | 22 +++ arch/arm/boot/dts/Makefile | 2 +- arch/arm/boot/dts/r8a7779-marzen-reference.dts | 110 -------------- arch/arm/boot/dts/r8a7779-marzen.dts | 82 ++++++++++ arch/arm/boot/dts/r8a7779.dtsi | 132 ++++++++++++++++ arch/arm/mach-shmobile/Kconfig | 21 +-- arch/arm/mach-shmobile/Makefile | 4 +- arch/arm/mach-shmobile/Makefile.boot | 1 - arch/arm/mach-shmobile/board-koelsch-reference.c | 1 + arch/arm/mach-shmobile/board-marzen-reference.c | 44 ++++++ arch/arm/mach-shmobile/board-marzen.c | 28 ++-- arch/arm/mach-shmobile/clock-r8a7779.c | 22 +-- arch/arm/mach-shmobile/include/mach/r8a7779.h | 2 +- arch/arm/mach-shmobile/setup-r8a7779.c | 28 ++-- drivers/clk/shmobile/Makefile | 1 + drivers/clk/shmobile/clk-r8a7779.c | 166 +++++++++++++++++++++ include/dt-bindings/clock/r8a7779-clock.h | 61 ++++++++ include/linux/clk/shmobile.h | 1 + 19 files changed, 564 insertions(+), 165 deletions(-) create mode 100644 Documentation/devicetree/bindings/clock/renesas,r8a7779-cpg-clocks.txt delete mode 100644 arch/arm/boot/dts/r8a7779-marzen-reference.dts create mode 100644 drivers/clk/shmobile/clk-r8a7779.c create mode 100644 include/dt-bindings/clock/r8a7779-clock.h
Signature · 1 line
1.8.4
RFC 8/17 ARM: shmobile: r8a7779: Add helper to read mode pins
Add and use helper to read mode pins.
This will be re-used when moving marzen-reference to the common clock framework.
--- arch/arm/mach-shmobile/clock-r8a7779.c | 11 ++--------- arch/arm/mach-shmobile/include/mach/r8a7779.h | 1 + arch/arm/mach-shmobile/setup-r8a7779.c | 14 ++++++++++++++ 3 files changed, 17 insertions(+), 9 deletions(-)
arch/arm/mach-shmobile/clock-r8a7779.c +2 -9
@@ -25,6 +25,7 @@#include <linux/clkdev.h> #include <mach/clock.h> #include <mach/common.h> +#include <mach/r8a7779.h> /* * MD1 = 1 MD1 = 0
@@ -59,9 +60,6 @@#define MSTPCR6 IOMEM(0xffc80058)#define MSTPCR7 IOMEM(0xffc80040) -#define MODEMR 0xffcc0020 - -/* ioremap() through clock mapping mandatory to avoid * collision with ARM coherent DMA virtual memory range. */
@@ -213,14 +211,9 @@ static struct clk_lookup lookups[] = {void __init r8a7779_clock_init (void ) { -void __iomem *modemr =ioremap_nocache (MODEMR ,PAGE_SIZE ); -u32 mode; +u32 mode =r8a7779_read_mode_pins ();int k, ret =0 ; -BUG_ON (!modemr); - mode =ioread32 (modemr); -iounmap (modemr); -if (mode &MD (1 )) { plla_clk.rate =1500000000 ;
arch/arm/mach-shmobile/include/mach/r8a7779.h +1 -0
@@ -39,6 +39,7 @@ extern void r8a7779_add_early_devices(void);extern void r8a7779_add_standard_devices (void );extern void r8a7779_add_standard_devices_dt (void );extern void r8a7779_init_late (void ); +extern u32 r8a7779_read_mode_pins (void );extern void r8a7779_clock_init (void );extern void r8a7779_pinmux_init (void );extern void r8a7779_pm_init (void );
arch/arm/mach-shmobile/setup-r8a7779.c +14 -0
@@ -874,6 +874,20 @@ void __init r8a7779_add_standard_devices_dt(void)of_platform_populate (NULL , of_default_bus_match_table,NULL ,NULL ); } +#define MODEMR 0xffcc0020 + +u32 __init r8a7779_read_mode_pins (void ) +{ +void __iomem *modemr =ioremap_nocache (MODEMR ,PAGE_SIZE ); +u32 mode; + +BUG_ON (!modemr); + mode =ioread32 (modemr); +iounmap (modemr); + +return mode; +} +static const char *r8a7779_compat_dt[]__initdata = {"renesas,r8a7779" ,NULL ,
Signature · 1 line
1.8.4
RFC 8/17 ARM: shmobile: r8a7779: Add helper to read mode pins
Hello.
Quoted 15 lines · Simon Horman
Add and use helper to read mode pins.
This will be re-used when moving marzen-reference to the common clock framework.Signed-off-by Simon Horman <[email protected]>--- arch/arm/mach-shmobile/clock-r8a7779.c | 11 ++--------- arch/arm/mach-shmobile/include/mach/r8a7779.h | 1 + arch/arm/mach-shmobile/setup-r8a7779.c | 14 ++++++++++++++ 3 files changed, 17 insertions(+), 9 deletions(-)arch/arm/mach-shmobile/clock-r8a7779.c +0
-0
[...]
arch/arm/mach-shmobile/setup-r8a7779.c void __init r8a7779_add_standard_devices_dt(void) · line 881
Quoted 13 lines
arch/arm/mach-shmobile/setup-r8a7779.c +5
-0@@ -874,6 +874,20 @@ void __init r8a7779_add_standard_devices_dt(void)of_platform_populate (NULL , of_default_bus_match_table,NULL ,NULL ); } +#define MODEMR 0xffcc0020 + +u32 __init r8a7779_read_mode_pins (void ) +{ +void __iomem *modemr =ioremap_nocache (MODEMR ,PAGE_SIZE );
Why waste 2 4K pages if you're only interested in 4 bytes (i.e. 1 page)? I
remember I've already asked that question...
arch/arm/mach-shmobile/setup-r8a7779.c void __init r8a7779_add_standard_devices_dt(void) · line 890
Quoted 9 lines
arch/arm/mach-shmobile/setup-r8a7779.c +9
-0+u32 mode; + +BUG_ON (!modemr); + mode =ioread32 (modemr); +iounmap (modemr); + +return mode; +} +
WBR, Sergei
RFC 8/17 ARM: shmobile: r8a7779: Add helper to read mode pins
Quoted 28 lines · Sergei Shtylyov
Hello.
Quoted 15 lines · Simon Horman
Add and use helper to read mode pins.
This will be re-used when moving marzen-reference to the common clock framework.Signed-off-by Simon Horman <[email protected]>--- arch/arm/mach-shmobile/clock-r8a7779.c | 11 ++--------- arch/arm/mach-shmobile/include/mach/r8a7779.h | 1 + arch/arm/mach-shmobile/setup-r8a7779.c | 14 ++++++++++++++ 3 files changed, 17 insertions(+), 9 deletions(-)arch/arm/mach-shmobile/clock-r8a7779.c +0
-0[...]
Quoted 8 lines
arch/arm/mach-shmobile/setup-r8a7779.c +0
-0@@ -874,6 +874,20 @@ void __init r8a7779_add_standard_devices_dt(void)of_platform_populate (NULL , of_default_bus_match_table,NULL ,NULL ); }
Quoted 8 lines
arch/arm/mach-shmobile/setup-r8a7779.c void __init r8a7779_add_standard_devices_dt(void) · line 881
Quoted 5 lines
arch/arm/mach-shmobile/setup-r8a7779.c +5
-0+#define MODEMR 0xffcc0020 + +u32 __init r8a7779_read_mode_pins (void ) +{ +void __iomem *modemr =ioremap_nocache (MODEMR ,PAGE_SIZE );Why waste 2 4K pages if you're only interested in 4 bytes (i.e. 1
page)? I remember I've already asked that question...
I don't recall if there was a conclusion to that discussion.
In any case, this patch just shuffles code around.
RFC 13/17 ARM: shmobile: marzen-reference: Initialize CPG device
On multiplatform kernels clocks are handled by the CCF CPG driver. It must be explicitly initialized by a call to rcar_gen2_clocks_init() with the value of the boot mode pins.
Based on similar work for the Koelsch board by Laurent Pinchart.
--- arch/arm/mach-shmobile/board-marzen-reference.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-)
arch/arm/mach-shmobile/board-marzen-reference.c +12 -4
@@ -19,7 +19,8 @@* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ -#include <linux/clk-provider.h> +#include <linux/clk/shmobile.h> +#include <linux/clocksource.h> #include <linux/of_platform.h> #include <mach/r8a7779.h> #include <mach/common.h>
@@ -28,11 +29,17 @@#include <asm/mach/arch.h> -static void __init marzen_init (void ) +static void __init marzen_init_timer (void ) {#ifdef CONFIG_COMMON_CLK -of_clk_init (NULL ); -#else +r8a7779_clocks_init (r8a7779_read_mode_pins ()); +#endif +clocksource_of_init (); +} + +static void __init marzen_init (void ) +{ +#ifndef CONFIG_COMMON_CLK r8a7779_clock_init ();#endif r8a7779_add_standard_devices_dt ();
@@ -49,6 +56,7 @@ DT_MACHINE_START(MARZEN, "marzen") .smp = smp_ops(r8a7779_smp_ops), .map_io = r8a7779_map_io, .init_early = r8a7779_init_delay, + .init_time = marzen_init_timer, .nr_irqs = NR_IRQS_LEGACY, .init_irq = r8a7779_init_irq_dt, .init_machine = marzen_init,
Signature · 1 line
1.8.4
RFC 13/17 ARM: shmobile: marzen-reference: Initialize CPG device
Hello.
Quoted 2 lines · Simon Horman
On multiplatform kernels clocks are handled by the CCF CPG driver. It must be explicitly initialized by a call to
rcar_gen2_clocks_init()with
You meant r8a7779_clocks_init() instead?
Quoted 14 lines
the value of the boot mode pins.
Based on similar work for the Koelsch board by Laurent Pinchart.
Cc Laurent Pinchart <[email protected]>Signed-off-by Simon Horman <[email protected]>--- arch/arm/mach-shmobile/board-marzen-reference.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-)arch/arm/mach-shmobile/board-marzen-reference.c +0
-0
[...]
Quoted 11 lines
arch/arm/mach-shmobile/board-marzen-reference.c +2
-3@@ -28,11 +29,17 @@#include <asm/mach/arch.h> -static void __init marzen_init (void ) +static void __init marzen_init_timer (void ) {#ifdef CONFIG_COMMON_CLK -of_clk_init (NULL ); -#else +r8a7779_clocks_init (r8a7779_read_mode_pins ());
arch/arm/mach-shmobile/board-marzen-reference.c line 45
Quoted 10 lines
arch/arm/mach-shmobile/board-marzen-reference.c +7
-0+#endif +clocksource_of_init (); +} + +static void __init marzen_init (void ) +{ +#ifndef CONFIG_COMMON_CLK r8a7779_clock_init ();#endif r8a7779_add_standard_devices_dt ();
WBR, Sergei
RFC 13/17 ARM: shmobile: marzen-reference: Initialize CPG device
Quoted 8 lines · Sergei Shtylyov
Hello.
Quoted 2 lines · Simon Horman
On multiplatform kernels clocks are handled by the CCF CPG driver. It must be explicitly initialized by a call to
rcar_gen2_clocks_init()withYou meant
r8a7779_clocks_init()instead?
Yes, thanks. I will fix that.
Quoted 40 lines
Quoted 15 lines
the value of the boot mode pins.
Based on similar work for the Koelsch board by Laurent Pinchart.
Cc Laurent Pinchart <[email protected]>Signed-off-by Simon Horman <[email protected]>--- arch/arm/mach-shmobile/board-marzen-reference.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-)arch/arm/mach-shmobile/board-marzen-reference.c +0
-0[...]
Quoted 11 lines
arch/arm/mach-shmobile/board-marzen-reference.c +2
-3@@ -28,11 +29,17 @@#include <asm/mach/arch.h> -static void __init marzen_init (void ) +static void __init marzen_init_timer (void ) {#ifdef CONFIG_COMMON_CLK -of_clk_init (NULL ); -#else +r8a7779_clocks_init (r8a7779_read_mode_pins ());arch/arm/mach-shmobile/board-marzen-reference.c line 45
Quoted 10 lines
arch/arm/mach-shmobile/board-marzen-reference.c +7
-0+#endif +clocksource_of_init (); +} + +static void __init marzen_init (void ) +{ +#ifndef CONFIG_COMMON_CLK r8a7779_clock_init ();#endif r8a7779_add_standard_devices_dt ();WBR, Sergei
RFC 15/17 ARM: shmobile: Remove non-multiplatform Marzen reference support
Now that r8a7779 has CCF support remove the legacy Marzen reference Kconfig bits CONFIG_MACH_KOELSCH_REFERENCE for the non-multiplatform case.
Starting from this commit Marzen board support is always enabled via CONFIG_MACH_KOELSCH, and CONFIG_ARCH_MULTIPLATFORM is used to select between board-koelsch.c and board-koelsch-reference.c
The file board-koelsch-reference.c can no longer be used together with the legacy sh-clk clock framework, instead CCF is used.
Based on work for the Koelsch board by Laurent Pinchart.
--- arch/arm/boot/dts/Makefile | 1 - arch/arm/mach-shmobile/Kconfig | 13 ------------- arch/arm/mach-shmobile/Makefile | 3 +-- arch/arm/mach-shmobile/Makefile.boot | 1 - 4 files changed, 1 insertion(+), 17 deletions(-)
arch/arm/boot/dts/Makefile +0 -1
@@ -205,7 +205,6 @@ dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += emev2-kzm9d.dtb \ r8a7778-bockw-reference.dtb \ r8a7740-armadillo800eva-reference.dtb \ r8a7779-marzen.dtb \ - r8a7779-marzen-reference.dtb \ r8a7791-koelsch.dtb \ r8a7791-koelsch-reference.dtb \ r8a7790-lager.dtb \
arch/arm/mach-shmobile/Kconfig +0 -13
@@ -239,19 +239,6 @@ config MACH_MARZEN select REGULATOR_FIXED_VOLTAGE if REGULATOR select USE_OF -config MACH_MARZEN_REFERENCE - bool "MARZEN board - Reference Device Tree Implementation" - depends on ARCH_R8A7779 - select ARCH_REQUIRE_GPIOLIB - select REGULATOR_FIXED_VOLTAGE if REGULATOR - select USE_OF - ---help--- - Use reference implementation of Marzen board support - which makes use of device tree at the expense - of not supporting a number of devices. - - This is intended to aid developers - config MACH_LAGER bool "Lager board" depends on ARCH_R8A7790
arch/arm/mach-shmobile/Makefile +1 -2
@@ -69,8 +69,7 @@ obj-$(CONFIG_MACH_BOCKW_REFERENCE) += board-bockw-reference.o obj-$(CONFIG_MACH_GENMAI) += board-genmai.o obj-$(CONFIG_MACH_GENMAI_REFERENCE) += board-genmai-reference.o obj-$(CONFIG_MACH_MARZEN) += board-marzen.o -obj-$(CONFIG_MACH_MARZEN_REFERENCE) += board-marzen-reference.o -obj-$(CONFIG_MACH_LAGER) += board-lager.o +obj-$(CONFIG_MACH_LAGER) += boardo-lager.o obj-$(CONFIG_MACH_LAGER_REFERENCE) += board-lager-reference.o obj-$(CONFIG_MACH_ARMADILLO800EVA) += board-armadillo800eva.o obj-$(CONFIG_MACH_ARMADILLO800EVA_REFERENCE) += board-armadillo800eva-reference.o
arch/arm/mach-shmobile/Makefile.boot +0 -1
@@ -16,7 +16,6 @@ loadaddr-$(CONFIG_MACH_LAGER) += 0x40008000 loadaddr-$(CONFIG_MACH_LAGER_REFERENCE) += 0x40008000 loadaddr-$(CONFIG_MACH_MACKEREL) += 0x40008000 loadaddr-$(CONFIG_MACH_MARZEN) += 0x60008000 -loadaddr-$(CONFIG_MACH_MARZEN_REFERENCE) += 0x60008000 __ZRELADDR := $(sort $(loadaddr-y)) zreladdr-y += $(__ZRELADDR)
Signature · 1 line
1.8.4
RFC 15/17 ARM: shmobile: Remove non-multiplatform Marzen reference support
Hi Simon
Quoted 3 lines
Now that r8a7779 has CCF support remove the legacy Marzen reference
KconfigbitsCONFIG_MACH_KOELSCH_REFERENCEfor the non-multiplatform case.
I guess
- CONFIG_MACH_KOELSCH_REFERENCE
+ CONFIG_MACH_MARZEN_REFERENCE
Quoted 2 lines
Starting from this commit Marzen board support is always enabled via
CONFIG_MACH_KOELSCH, andCONFIG_ARCH_MULTIPLATFORMis used to select
ditto ?
Quoted 2 lines
between
board-koelsch.candboard-koelsch-reference.c
The fileboard-koelsch-reference.ccan no longer be used together with
koelsch <-> marzen ?
arch/arm/mach-shmobile/Makefile obj-$(CONFIG_MACH_BOCKW_REFERENCE) += board-bockw-reference.o · line 72
Quoted 9 lines
arch/arm/mach-shmobile/Makefile +1
-2@@ -69,8 +69,7 @@ obj-$(CONFIG_MACH_BOCKW_REFERENCE) += board-bockw-reference.o obj-$(CONFIG_MACH_GENMAI) += board-genmai.o obj-$(CONFIG_MACH_GENMAI_REFERENCE) += board-genmai-reference.o obj-$(CONFIG_MACH_MARZEN) += board-marzen.o -obj-$(CONFIG_MACH_MARZEN_REFERENCE) += board-marzen-reference.o -obj-$(CONFIG_MACH_LAGER) += board-lager.o +obj-$(CONFIG_MACH_LAGER) += boardo-lager.o
boardo-lager ??
^
Best regards
---
Kuninori Morimoto
RFC 15/17 ARM: shmobile: Remove non-multiplatform Marzen reference support
Quoted 22 lines · Kuninori Morimoto
Hi Simon
Quoted 3 lines
Now that r8a7779 has CCF support remove the legacy Marzen reference
KconfigbitsCONFIG_MACH_KOELSCH_REFERENCEfor the non-multiplatform case.I guess
-
CONFIG_MACH_KOELSCH_REFERENCE
+CONFIG_MACH_MARZEN_REFERENCEQuoted 2 lines
Starting from this commit Marzen board support is always enabled via
CONFIG_MACH_KOELSCH, andCONFIG_ARCH_MULTIPLATFORMis used to selectditto ?
Quoted 2 lines
between
board-koelsch.candboard-koelsch-reference.c
The fileboard-koelsch-reference.ccan no longer be used together withkoelsch <-> marzen ?
Quoted 11 lines
arch/arm/mach-shmobile/Makefile obj-$(CONFIG_MACH_BOCKW_REFERENCE) += board-bockw-reference.o · line 72
Quoted 9 lines
arch/arm/mach-shmobile/Makefile +1
-2@@ -69,8 +69,7 @@ obj-$(CONFIG_MACH_BOCKW_REFERENCE) += board-bockw-reference.o obj-$(CONFIG_MACH_GENMAI) += board-genmai.o obj-$(CONFIG_MACH_GENMAI_REFERENCE) += board-genmai-reference.o obj-$(CONFIG_MACH_MARZEN) += board-marzen.o -obj-$(CONFIG_MACH_MARZEN_REFERENCE) += board-marzen-reference.o -obj-$(CONFIG_MACH_LAGER) += board-lager.o +obj-$(CONFIG_MACH_LAGER) += boardo-lager.oboardo-lager ??
Thanks. Sorry for the silly errors.
RFC 16/17 ARM: shmobile: Let Marzen multiplatform boot with Marzen DTB
Let the multiplatform Marzen support boot with the legacy DTS for Marzen as well as the Marzen reference DTS.
Based on work for the Koelsch board by Laurent Pinchart.
--- arch/arm/boot/dts/Makefile | 2 +- arch/arm/mach-shmobile/board-koelsch-reference.c | 1 + arch/arm/mach-shmobile/board-marzen-reference.c | 1 + 3 files changed, 3 insertions(+), 1 deletion(-)
arch/arm/boot/dts/Makefile +1 -1
@@ -216,7 +216,7 @@ dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += emev2-kzm9d.dtb \ sh7372-mackerel.dtb dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += emev2-kzm9d.dtb \ r7s72100-genmai-reference.dtb \ - r8a7779-marzen-reference.dtb \ + r8a7779-marzen.dtb \ r8a7791-koelsch-reference.dtb dtb-$(CONFIG_ARCH_SOCFPGA) += socfpga_cyclone5.dtb \ socfpga_vt.dtb
arch/arm/mach-shmobile/board-koelsch-reference.c +1 -0
@@ -38,6 +38,7 @@ static void __init koelsch_add_standard_devices(void) }static const char *const koelsch_boards_compat_dt[]__initconst = { +"renesas,koelsch" ,"renesas,koelsch-reference" ,NULL , };
arch/arm/mach-shmobile/board-marzen-reference.c +1 -0
@@ -74,6 +74,7 @@ static void __init marzen_init(void) }static const char *marzen_boards_compat_dt[]__initdata = { +"renesas,marzen" ,"renesas,marzen-reference" ,NULL , };
Signature · 1 line
1.8.4
RFC 16/17 ARM: shmobile: Let Marzen multiplatform boot with Marzen DTB
Hi Simon
Quoted 8 lines
Let the multiplatform Marzen support boot with the legacy DTS for Marzen as well as the Marzen reference DTS.
Based on work for the Koelsch board by Laurent Pinchart.
Cc Laurent Pinchart <[email protected]>Signed-off-by Simon Horman <[email protected]>---
(snip)
arch/arm/mach-shmobile/board-koelsch-reference.c static void __init koelsch_add_standard_devices(void) · line 44
Quoted 10 lines
arch/arm/mach-shmobile/board-koelsch-reference.c +1
-0@@ -38,6 +38,7 @@ static void __init koelsch_add_standard_devices(void) }static const char *const koelsch_boards_compat_dt[]__initconst = { +"renesas,koelsch" ,"renesas,koelsch-reference" ,NULL , };
You are modifying koelsch file in marzen patch ?
Best regards
---
Kuninori Morimoto
RFC 16/17 ARM: shmobile: Let Marzen multiplatform boot with Marzen DTB
Quoted 17 lines · Kuninori Morimoto
Hi Simon
Quoted 8 lines
Let the multiplatform Marzen support boot with the legacy DTS for Marzen as well as the Marzen reference DTS.
Based on work for the Koelsch board by Laurent Pinchart.
Cc Laurent Pinchart <[email protected]>Signed-off-by Simon Horman <[email protected]>---
(snip)
Quoted 5 lines
arch/arm/mach-shmobile/board-koelsch-reference.c +0
-0@@ -38,6 +38,7 @@ static void __init koelsch_add_standard_devices(void) }
Quoted 7 lines
arch/arm/mach-shmobile/board-koelsch-reference.c static void __init koelsch_add_standard_devices(void) · line 44
Quoted 5 lines
arch/arm/mach-shmobile/board-koelsch-reference.c +1
-0static const char *const koelsch_boards_compat_dt[]__initconst = { +"renesas,koelsch" ,"renesas,koelsch-reference" ,NULL , };You are modifying koelsch file in marzen patch ?
Sorry, my mistake. I'll fix that.