ARM: Kconfig: Mention R-Mobile and R-Car in addition to SH-Mobile
PATCH 1/1 ARM: Kconfig: Mention R-Mobile and R-Car in addition to SH-Mobile
External engineers working on R-Car platforms sometimes can't find upstream platform support as the combination of the SH-Mobile name and using the product number proved an effective method of concealment. Make sure to mention R-Mobile and R-Car in the Kconfig comments and help texts.
--- arch/arm/Kconfig | 4 ++-- arch/arm/mach-shmobile/Kconfig | 21 +++++++++++---------- 2 files changed, 13 insertions(+), 12 deletions(-)
arch/arm/Kconfig +2 -2
@@ -643,7 +643,7 @@ config ARCH_MSM (clock and power control, etc). config ARCH_SHMOBILE - bool "Renesas SH-Mobile / R-Mobile" + bool "Renesas SH-/R-Mobile and R-Car" select ARM_PATCH_PHYS_VIRT select CLKDEV_LOOKUP select GENERIC_CLOCKEVENTS
@@ -659,7 +659,7 @@ config ARCH_SHMOBILE select PM_GENERIC_DOMAINS if PM select SPARSE_IRQ help - Support for Renesas's SH-Mobile and R-Mobile ARM platforms. + Support for Renesas's SH-/R-Mobile and R-Car ARM platforms. config ARCH_RPC bool "RiscPC"
arch/arm/mach-shmobile/Kconfig +11 -10
@@ -1,5 +1,5 @@ config ARCH_SHMOBILE_MULTI - bool "SH-Mobile Series" if ARCH_MULTI_V7 + bool "SH-/R-Mobile and R-Car Series" if ARCH_MULTI_V7 depends on MMU select CPU_V7 select GENERIC_CLOCKEVENTS
@@ -15,24 +15,24 @@ config ARCH_SHMOBILE_MULTI if ARCH_SHMOBILE_MULTI -comment "SH-Mobile System Type" +comment "SH-/R-Mobile and R-Car System Type" config ARCH_EMEV2 bool "Emma Mobile EV2" -comment "SH-Mobile Board Type" +comment "SH-/R-Mobile and R-Car Board Type" config MACH_KZM9D bool "KZM9D board" depends on ARCH_EMEV2 select REGULATOR_FIXED_VOLTAGE if REGULATOR -comment "SH-Mobile System Configuration" +comment "SH-/R-Mobile and R-Car System Configuration" endif if ARCH_SHMOBILE -comment "SH-Mobile System Type" +comment "SH-/R-Mobile and R-Car System Type" config ARCH_SH7372 bool "SH-Mobile AP4 (SH7372)"
@@ -116,7 +116,7 @@ config ARCH_R7S72100 select CPU_V7 select SH_CLK_CPG -comment "SH-Mobile Board Type" +comment "SH-/R-Mobile and R-Car Board Type" config MACH_APE6EVM bool "APE6EVM board"
@@ -275,7 +275,7 @@ config MACH_KZM9G_REFERENCE This is intended to aid developers -comment "SH-Mobile System Configuration" +comment "SH-/R-Mobile and R-Car System Configuration" config CPU_HAS_INTEVT bool
@@ -300,9 +300,10 @@ config SHMOBILE_TIMER_HZ Allows the configuration of the timer frequency. It is customary to have the timer interrupt run at 1000 Hz or 100 Hz, but in the case of low timer frequencies other values may be more suitable. - SH-Mobile systems using a 32768 Hz RCLK for clock events may want - to select a HZ value such as 128 that can evenly divide RCLK. - A HZ value that does not divide evenly may cause timer drift. + SH-/R-Mobile and R-Car systems using a 32768 Hz RCLK for clock + events may want to select a HZ value such as 128 that can evenly + divide RCLK. A HZ value that does not divide evenly may cause timer + drift. config SH_TIMER_CMT bool "CMT timer driver"
Signature · 1 line
1.8.3.2
Magnus Damm
maintainerPATCH 1/1 ARM: Kconfig: Mention R-Mobile and R-Car in addition to SH-Mobile
Hi Laurent,
Quoted 8 lines · Laurent Pinchart
External engineers working on R-Car platforms sometimes can't find upstream platform support as the combination of the SH-Mobile name and using the product number proved an effective method of concealment. Make sure to mention R-Mobile and R-Car in the
Kconfigcomments and help texts.Reported-by Phil Edworthy <[email protected]>Signed-off-by Laurent Pinchart <[email protected]>
Thanks for your efforts on this. I think this is a good idea, but to make things a bit more complex I think you should know that r7s72100 is part of the "RZ Family". Also EMEV2 is part of the "Emma" series.
May I propose "Renesas SoC" as a generic description?
Thanks,
/ magnus
PATCH 1/1 ARM: Kconfig: Mention R-Mobile and R-Car in addition to SH-Mobile
Hi Magnus,
Quoted 11 lines · On Thursday 14 November 2013 19:07:12 Magnus Damm wrote:
Quoted 9 lines · Laurent Pinchart
External engineers working on R-Car platforms sometimes can't find upstream platform support as the combination of the SH-Mobile name and using the product number proved an effective method of concealment. Make sure to mention R-Mobile and R-Car in the
Kconfigcomments and help texts.Reported-by Phil Edworthy <[email protected]>Signed-off-by Laurent Pinchart
Quoted 5 lines
Thanks for your efforts on this. I think this is a good idea, but to make things a bit more complex I think you should know that r7s72100 is part of the "RZ Family". Also EMEV2 is part of the "Emma" series.
May I propose "Renesas SoC" as a generic description?
What about "Renesas ARM SoC" ?
Signature · 3 lines
Regards, Laurent Pinchart
PATCH 1/1 ARM: Kconfig: Mention R-Mobile and R-Car in addition to SH-Mobile
Quoted 14 lines · Laurent Pinchart
Hi Magnus,
Quoted 11 lines · On Thursday 14 November 2013 19:07:12 Magnus Damm wrote:
Quoted 9 lines · Laurent Pinchart
External engineers working on R-Car platforms sometimes can't find upstream platform support as the combination of the SH-Mobile name and using the product number proved an effective method of concealment. Make sure to mention R-Mobile and R-Car in the
Kconfigcomments and help texts.Reported-by Phil Edworthy <[email protected]>Signed-off-by Laurent Pinchart
Quoted 7 lines
Quoted 5 lines
Thanks for your efforts on this. I think this is a good idea, but to make things a bit more complex I think you should know that r7s72100 is part of the "RZ Family". Also EMEV2 is part of the "Emma" series.
May I propose "Renesas SoC" as a generic description?
What about "Renesas ARM SoC" ?
Sounds good to me.