x86: mcheck: call put_device on device_register failure
PATCH 1/1 x86: mcheck: call put_device on device_register failure
This patch adds a call to put_device() when the device_register() call has failed. This is required so that the last reference to the device is given up.
--- arch/x86/kernel/cpu/mcheck/mce.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
arch/x86/kernel/cpu/mcheck/mce.c +3 -1
@@ -2272,8 +2272,10 @@ static int mce_device_create(unsigned int cpu) dev->release = &mce_device_release; err =device_register (dev); -if (err) +if (err) { +put_device (dev);return err; + }for (i =0 ; mce_device_attrs[i]; i++) { err =device_create_file (dev, mce_device_attrs[i]);
Signature · 1 line
1.8.1.2
Borislav Petkov
maintainerQuoted 3 lines · Levente Kurusa
This patch adds a call to
put_device()when thedevice_register()call has failed. This is required so that the last reference to the device is given up.
I'd assume this is not something you're actually hitting but have caught this by code staring...?
Quoted 10 lines
Signed-off-by Levente Kurusa <[email protected]>--- arch/x86/kernel/cpu/mcheck/mce.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)arch/x86/kernel/cpu/mcheck/mce.c +0
-0
arch/x86/kernel/cpu/mcheck/mce.c static int mce_device_create(unsigned int cpu) · line 2278
Quoted 8 lines
arch/x86/kernel/cpu/mcheck/mce.c +3
-1@@ -2272,8 +2272,10 @@ static int mce_device_create(unsigned int cpu) dev->release = &mce_device_release; err =device_register (dev); -if (err) +if (err) { +put_device (dev);return err; + }
If we're going to do this, I'd also like to see you add another label after device_unregister(dev) which also kfrees dev because apparently we're not doing that either.
Thanks.
Signature · 5 lines
Regards/Gruss,
Boris.
Sent from a fat crate under my desk. Formatting is fine.
--2013-11-29 21:56, Borislav Petkov:
Quoted 8 lines · Levente Kurusa
Quoted 3 lines
This patch adds a call to
put_device()when thedevice_register()call has failed. This is required so that the last reference to the device is given up.I'd assume this is not something you're actually hitting but have caught this by code staring...?
Yup, I have been staring at it.
Quoted 4 lines
If we're going to do this, I'd also like to see you add another label after
device_unregister(dev)which also kfrees dev because apparently we're not doing that either.
No, if the call to put_device gives up the last reference to the device, then device_release gets called which in turn frees the memory associated with it. In this case, mce_device_release() will get called, which is just a simple kfree call.
Signature · 2 lines
Regards, Levente Kurusa
Borislav Petkov
maintainerQuoted 4 lines · Levente Kurusa
No, if the call to
put_devicegives up the last reference to the device, thendevice_releasegets called which in turn frees the memory associated with it. In this case,mce_device_release()will get called, which is just a simple kfree call.
Aah, that's that delayed freeing the driver core does, right. Now you made me go and look into detail:
device_unregister
|->put_device
|->kobject_put
|->kref_put(&kobj->kref, kobject_release) |->kref_sub(kref, 1, release) |->release |->kobject_release |->kobject_cleanup |->t->release |->device_release |->mce_device_release
Ok, I see it now. :-) :-)
Thanks, I'll take your patch as-is.
Signature · 5 lines
Regards/Gruss,
Boris.
Sent from a fat crate under my desk. Formatting is fine.
--2013-11-30 12:12, Borislav Petkov:
Quoted 12 lines · Levente Kurusa
Quoted 4 lines
No, if the call to
put_devicegives up the last reference to the device, thendevice_releasegets called which in turn frees the memory associated with it. In this case,mce_device_release()will get called, which is just a simple kfree call.Aah, that's that delayed freeing the driver core does, right. Now you made me go and look into detail:
device_unregister
|->put_device
|->kobject_put
Quoted 9 lines
|->kref_put(&kobj->kref, kobject_release) |->kref_sub(kref, 1, release) |->release |->kobject_release |->kobject_cleanup |->t->release |->device_release |->mce_device_release
Now this tree makes me wonder if there are devices where the author forgot to set a device_release or when the put_device is not called. I will take a look into this.
Quoted 5 lines
Ok, I see it now. :-) :-)
Thanks, I'll take your patch as-is.
Awesome, thanks! :-)
Signature · 2 lines
Regards, Levente Kurusa
Borislav Petkov
maintainerQuoted 3 lines · Levente Kurusa
Now this tree makes me wonder if there are devices where the author forgot to set a
device_releaseor when theput_deviceis not called. I will take a look into this.
kobject_cleanup() warns about !t->release already.
If you want to fix actual issues and not waste time with potential issues which have never actually triggered, try building a couple of randconfigs and look at the output :-)
Also, we have "make W=" which gives you even more :-)
Signature · 5 lines
Regards/Gruss,
Boris.
Sent from a fat crate under my desk. Formatting is fine.
--2013-11-30 12:32, Borislav Petkov:
Quoted 6 lines · Levente Kurusa
Quoted 3 lines
Now this tree makes me wonder if there are devices where the author forgot to set a
device_releaseor when theput_deviceis not called. I will take a look into this.
kobject_cleanup()warns about !t->release already.
Yes, I saw that as well. By that I meant that by doing some identifier searches for device_register and then checking whether they call put_device and have device_release registered. Also, I wonder if it would be beneficial to have a generic device_release? Most of the drivers I quickly swept through only call kfree(). Wouldn't a generic one save some space?
Quoted 4 lines
If you want to fix actual issues and not waste time with potential issues which have never actually triggered, try building a couple of randconfigs and look at the output :-)
Yes, I do that daily usually, but most of the time I only get some uninitialized warnings. :-)
Quoted 2 lines
Also, we have "make W=" which gives you even more :-)
What does that do? Never heard of it yet.
Signature · 2 lines
Regards, Levente Kurusa
Borislav Petkov
maintainerQuoted 6 lines · Levente Kurusa
Yes, I saw that as well. By that I meant that by doing some identifier searches for
device_registerand then checking whether they callput_deviceand havedevice_releaseregistered. Also, I wonder if it would be beneficial to have a genericdevice_release? Most of the drivers I quickly swept through only callkfree(). Wouldn't a generic one save some space?
Again, I wouldn't waste my time with hypothetical issues which never happen - there are many other, real issues which would rather need attention than what-if ones.
About saving space, that could be worth a try. If you can actually do that and show numbers to back it up, I'm sure people will have a look. And if you can't show any space savings, you'll still have learned stuff along the way.
But don't ask me about whether it makes sense to have a generic device_release - I'm no driver core and am not even trying. You could try to answer that question yourself, btw. :)
Quoted 2 lines
Yes, I do that daily usually, but most of the time I only get some uninitialized warnings. :-)
You can always try to understand why such warnings get issued and maybe even fix them if they're legit and the compiler is right. Also, look through git log for examples how others have fixed such warnings.
For example, sometimes changing code flow instead of simply shutting up the variable is much better. But in order to do that, you'd need to understand the code first and try to change it so that it doesn't break and the warning disappears. This is a very good way, IMO, to get to really understand what the code does and learn from others.
Another good exercise is trying to boot those random kernels with kvm - that can catch a bunch of issues too.
The save-space experiment you can also quickly test with kvm. By now you probably are catching my drift: testing kernels with kvm is awesome! :-)
Quoted 1 line
What does that do? Never heard of it yet.
Well, you can have a look: scripts/Makefile.build
:-)
Good luck!
Signature · 5 lines
Regards/Gruss,
Boris.
Sent from a fat crate under my desk. Formatting is fine.
--2013-11-30 13:08 keltezéssel, Borislav Petkov írta:
Quoted 12 lines · Levente Kurusa
Quoted 6 lines
Yes, I saw that as well. By that I meant that by doing some identifier searches for
device_registerand then checking whether they callput_deviceand havedevice_releaseregistered. Also, I wonder if it would be beneficial to have a genericdevice_release? Most of the drivers I quickly swept through only callkfree(). Wouldn't a generic one save some space?Again, I wouldn't waste my time with hypothetical issues which never happen - there are many other, real issues which would rather need attention than what-if ones.
Quoted 8 lines
About saving space, that could be worth a try. If you can actually do that and show numbers to back it up, I'm sure people will have a look. And if you can't show any space savings, you'll still have learned stuff along the way.
But don't ask me about whether it makes sense to have a generic
device_release- I'm no driver core and am not even trying. You could try to answer that question yourself, btw. :)
Okay, I will, thanks for the tips! :)
Quoted 7 lines
Quoted 3 lines
Yes, I do that daily usually, but most of the time I only get some uninitialized warnings. :-)
You can always try to understand why such warnings get issued and maybe even fix them if they're legit and the compiler is right. Also, look through git log for examples how others have fixed such warnings.
Yes, but there are some fake one where for example it doesn't recognize the pci_read_config_byte call as something which could write to its args. So most of them are fake warnings.
Quoted 7 lines
For example, sometimes changing code flow instead of simply shutting up the variable is much better. But in order to do that, you'd need to understand the code first and try to change it so that it doesn't break and the warning disappears. This is a very good way, IMO, to get to really understand what the code does and learn from others.
Quoted 5 lines
Another good exercise is trying to boot those random kernels with kvm - that can catch a bunch of issues too.
The save-space experiment you can also quickly test with kvm. By now you probably are catching my drift: testing kernels with kvm is awesome! :-)
I will try kvm, didn't use that before. :p
Quoted 4 lines
Quoted 2 lines
What does that do? Never heard of it yet.
Well, you can have a look:
scripts/Makefile.build
Ahh, now I see. Just didn't know where to look.
Quoted 4 lines
:-)
Good luck!
Thank you and for your time! :)
Signature · 2 lines
Regards, Levente Kurusa
Quoted 32 lines · Borislav Petkov
Date: Sat, 30 Nov 2013 12:12:14 +0100
From: Borislav Petkov <[email protected]>
To: Levente Kurusa <[email protected]>
Cc: Ingo Molnar <[email protected]>, Thomas Gleixner <[email protected]>,
Tony Luck <[email protected]>, "H. Peter Anvin" <[email protected]>, [email protected], EDAC <[email protected]>, LKML <[email protected]>
Subject: Re: [PATCH] x86: mcheck: callput_deviceondevice_registerfailure
User-Agent: Mutt/1.5.21 (2010-09-15)Quoted 4 lines · Levente Kurusa
No, if the call to
put_devicegives up the last reference to the device, thendevice_releasegets called which in turn frees the memory associated with it. In this case,mce_device_release()will get called, which is just a simple kfree call.Aah, that's that delayed freeing the driver core does, right. Now you made me go and look into detail:
device_unregister
|->put_device
|->kobject_put|->kref_put(&kobj->kref, kobject_release) |->kref_sub(kref, 1, release) |->release |->kobject_release |->kobject_cleanup |->t->release |->device_release |->mce_device_release
Quoted 4 lines
Ok, I see it now. :-) :-)
Thanks, I'll take your patch as-is.
I have some concerns about it. if device_register is failed, it will backtraces all kinds of conditions automatically, including put_device definately. So do we really need an extra put_device when it returns failure?
Borislav Petkov
maintainerCan you please fix your
Mail-Followup-To:
header? It is impossible to reply to your emails without fiddling with the To: and Cc: by hand which gets very annoying over time.
Quoted 4 lines · Gong
I have some concerns about it. if
device_registeris failed, it will backtraces all kinds of conditions automatically, includingput_devicedefinately. So do we really need an extraput_devicewhen it returns failure?
Do you mean the "done:" label in device_add() which does put_device() and which gets called by device_register()?
Signature · 5 lines
Regards/Gruss,
Boris.
Sent from a fat crate under my desk. Formatting is fine.
--Quoted 10 lines · Borislav Petkov
Date: Tue, 3 Dec 2013 18:01:50 +0100
From: Borislav Petkov <[email protected]>
To: "Chen, Gong" <[email protected]>
Cc: Levente Kurusa <[email protected]>, Ingo Molnar <[email protected]>,
Thomas Gleixner <[email protected]>, Tony Luck <[email protected]>, "H. Peter Anvin" <[email protected]>, [email protected], EDAC <[email protected]>, LKML <[email protected]>
Subject: Re: [PATCH] x86: mcheck: callput_deviceondevice_registerfailure
User-Agent: Mutt/1.5.21 (2010-09-15)
Quoted 6 lines
Can you please fix your
Mail-Followup-To:
header? It is impossible to reply to your emails without fiddling with the To: and Cc: by hand which gets very annoying over time.
I add some configs in my muttrc. Hope it works.
Quoted 10 lines · Gong
Quoted 4 lines
I have some concerns about it. if
device_registeris failed, it will backtraces all kinds of conditions automatically, includingput_devicedefinately. So do we really need an extraput_devicewhen it returns failure?Do you mean the "done:" label in
device_add()which doesput_device()and which gets called bydevice_register()?
Not only. I noticed that another put_device under label "Error:".
2013-12-04 08:38, Chen, Gong:
Quoted 27 lines · Borislav Petkov
Quoted 10 lines
Date: Tue, 3 Dec 2013 18:01:50 +0100
From: Borislav Petkov <[email protected]>
To: "Chen, Gong" <[email protected]>
Cc: Levente Kurusa <[email protected]>, Ingo Molnar <[email protected]>,
Thomas Gleixner <[email protected]>, Tony Luck <[email protected]>, "H. Peter Anvin" <[email protected]>, [email protected], EDAC <[email protected]>, LKML <[email protected]>
Subject: Re: [PATCH] x86: mcheck: callput_deviceondevice_registerfailure
User-Agent: Mutt/1.5.21 (2010-09-15)Quoted 6 lines
Can you please fix your
Mail-Followup-To:
header? It is impossible to reply to your emails without fiddling with the To: and Cc: by hand which gets very annoying over time.
I add some configs in my muttrc. Hope it works.
Quoted 7 lines · Gong
Quoted 4 lines
I have some concerns about it. if
device_registeris failed, it will backtraces all kinds of conditions automatically, includingput_devicedefinately. So do we really need an extraput_devicewhen it returns failure?
Quoted 6 lines
Quoted 3 lines
Do you mean the "done:" label in
device_add()which doesput_device()and which gets called bydevice_register()?Not only. I noticed that another
put_deviceunder label "Error:".
That label is called when we failed to add the kobject to its parent. It just puts the parent of the device. I don't think it has anything to do with us put_device()-ing the actual device too.
Signature · 2 lines
Regards, Levente Kurusa
Quoted 42 lines · Levente Kurusa
Date: Wed, 04 Dec 2013 19:39:07 +0100
From: Levente Kurusa <[email protected]>
To: Borislav Petkov <[email protected]>, Ingo Molnar <[email protected]>, Thomas
Gleixner <[email protected]>, Tony Luck <[email protected]>, "H. Peter Anvin" <[email protected]>, [email protected], EDAC <[email protected]>, LKML <[email protected]>
Subject: Re: [PATCH] x86: mcheck: callput_deviceondevice_registerfailure
User-Agent: Mozilla/5.0 (X11; Linux i686; rv:24.0) Gecko/20100101
Thunderbird/24.1.02013-12-04 08:38, Chen, Gong:
Quoted 31 lines · Borislav Petkov
Quoted 10 lines
Date: Tue, 3 Dec 2013 18:01:50 +0100
From: Borislav Petkov <[email protected]>
To: "Chen, Gong" <[email protected]>
Cc: Levente Kurusa <[email protected]>, Ingo Molnar <[email protected]>,
Thomas Gleixner <[email protected]>, Tony Luck <[email protected]>, "H. Peter Anvin" <[email protected]>, [email protected], EDAC <[email protected]>, LKML <[email protected]>
Subject: Re: [PATCH] x86: mcheck: callput_deviceondevice_registerfailure
User-Agent: Mutt/1.5.21 (2010-09-15)Quoted 6 lines
Can you please fix your
Mail-Followup-To:
header? It is impossible to reply to your emails without fiddling with the To: and Cc: by hand which gets very annoying over time.
I add some configs in my muttrc. Hope it works.
Quoted 10 lines · Gong
Quoted 4 lines
I have some concerns about it. if
device_registeris failed, it will backtraces all kinds of conditions automatically, includingput_devicedefinately. So do we really need an extraput_devicewhen it returns failure?Do you mean the "done:" label in
device_add()which doesput_device()and which gets called bydevice_register()?
Quoted 7 lines
Quoted 2 lines
Not only. I noticed that another
put_deviceunder label "Error:".That label is called when we failed to add the kobject to its parent. It just puts the parent of the device. I don't think it has anything to do with us put_device()-ing the actual device too.
OK, you are right. I read some kobject related codes and get:
static inline void kref_init(struct kref *kref)
{
atomic_set(&kref->refcount, 1);
}The init refcount is 1, which means even if we meet an error and put_device in device_add, we still need an extra put_device to make refcount = 0 and then release the dev object.
BTW, from the comments of device_register:
"NOTE: _Never_ directly free @dev after calling this function, even
if it returned an error! Always use put_device() to give up the reference initialized in this function instead. "
Many caller don't follow this logic. For example:
in arch/arm/common/locomo.clocomo_init_one_child
...
ret = device_register(&dev->dev);
if (ret) {
out:
kfree(dev);
}...
in arch/parisc/kernel/drivers.ccreate_tree_node
...
if (device_register(&dev->dev)) {
kfree(dev);
return NULL;
}...
etc.
Maybe we need one more patch to fix them all. :-)
Quoted 7 lines
Signature · 6 lines
Regards, Levente Kurusa -- To unsubscribe from this list: send the line "unsubscribe linux-edac" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
2013-12-05 03:57 keltezéssel, Chen, Gong írta:
Quoted 52 lines · Levente Kurusa
Quoted 42 lines
Date: Wed, 04 Dec 2013 19:39:07 +0100
From: Levente Kurusa <[email protected]>
To: Borislav Petkov <[email protected]>, Ingo Molnar <[email protected]>, Thomas
Gleixner <[email protected]>, Tony Luck <[email protected]>, "H. Peter Anvin" <[email protected]>, [email protected], EDAC <[email protected]>, LKML <[email protected]>
Subject: Re: [PATCH] x86: mcheck: callput_deviceondevice_registerfailure
User-Agent: Mozilla/5.0 (X11; Linux i686; rv:24.0) Gecko/20100101
Thunderbird/24.1.02013-12-04 08:38, Chen, Gong:
Quoted 31 lines · Borislav Petkov
Quoted 10 lines
Date: Tue, 3 Dec 2013 18:01:50 +0100
From: Borislav Petkov <[email protected]>
To: "Chen, Gong" <[email protected]>
Cc: Levente Kurusa <[email protected]>, Ingo Molnar <[email protected]>,
Thomas Gleixner <[email protected]>, Tony Luck <[email protected]>, "H. Peter Anvin" <[email protected]>, [email protected], EDAC <[email protected]>, LKML <[email protected]>
Subject: Re: [PATCH] x86: mcheck: callput_deviceondevice_registerfailure
User-Agent: Mutt/1.5.21 (2010-09-15)Quoted 6 lines
Can you please fix your
Mail-Followup-To:
header? It is impossible to reply to your emails without fiddling with the To: and Cc: by hand which gets very annoying over time.
I add some configs in my muttrc. Hope it works.
Quoted 10 lines · Gong
Quoted 4 lines
I have some concerns about it. if
device_registeris failed, it will backtraces all kinds of conditions automatically, includingput_devicedefinately. So do we really need an extraput_devicewhen it returns failure?Do you mean the "done:" label in
device_add()which doesput_device()and which gets called bydevice_register()?Quoted 7 lines
Quoted 2 lines
Not only. I noticed that another
put_deviceunder label "Error:".That label is called when we failed to add the kobject to its parent. It just puts the parent of the device. I don't think it has anything to do with us put_device()-ing the actual device too.
OK, you are right. I read some kobject related codes and get:
Quoted 8 lines
static inline void
kref_init(struct kref *kref){ atomic_set(&kref->refcount, 1); }The init refcount is 1, which means even if we meet an error and
put_deviceindevice_add, we still need an extraput_deviceto make refcount = 0 and then release the dev object.
Exactly. This is why the comment you have found later on. :-)
Quoted 7 lines
BTW, from the comments of
device_register:"NOTE: _Never_ directly free @dev after calling this function, even
if it returned an error! Always useput_device()to give up the reference initialized in this function instead. "
Quoted 8 lines
Many caller don't follow this logic. For example:
inarch/arm/common/locomo.clocomo_init_one_child
...ret = device_register(&dev->dev); if (ret) { out: kfree(dev);
Umm, but it frees dev which is a container_of dev->dev so dev->dev is not even freed. This is a memleak as well.
Quoted 8 lines
}...
in
arch/parisc/kernel/drivers.ccreate_tree_node
...if (device_register(&dev->dev)) { kfree(dev);
Same here.
Quoted 7 lines
return NULL; }...
etc.
Maybe we need one more patch to fix them all. :-)
Yes, I will post a series which fixes this during the weekend when I am not that busy. :-)
Signature · 2 lines
Regards, Levente Kurusa