Staging: bcm: DDRInit: Fixed non_standard kernel style.
PATCH 1/1 Staging: bcm: DDRInit: Fixed non_standard kernel style.
Fixed non_standard kernel style.
Signed off by: Gary Alan Rookard <[email protected]>
--- drivers/staging/bcm/DDRInit.c | 2081 +++++++++++++++++++---------------------- 1 file changed, 977 insertions(+), 1104 deletions(-)
drivers/staging/bcm/DDRInit.c +977 -1104
@@ -1,977 +1,876 @@ -#include "headers.h" - +/* File: DDRInit.c */ +#include "headers.h" #define DDR_DUMP_INTERNAL_DEVICE_MEMORY 0xBFC02B00 -#define MIPS_CLOCK_REG 0x0f000820 - -//DDR INIT-133Mhz -#define T3_SKIP_CLOCK_PROGRAM_DUMP_133MHZ 12 //index for 0x0F007000 -static struct bcm_ddr_setting asT3_DDRSetting133MHz[]= {// # DPLL Clock Setting - {0x0F000800 ,0x00007212 }, - {0x0f000820 ,0x07F13FFF }, - {0x0f000810 ,0x00000F95 }, - {0x0f000860 ,0x00000000 }, - {0x0f000880 ,0x000003DD }, -// Changed source for X-bar and MIPS clock to APLL - {0x0f000840 ,0x0FFF1B00 }, - {0x0f000870 ,0x00000002 }, - {0x0F00a044 ,0x1fffffff }, - {0x0F00a040 ,0x1f000000 }, - {0x0F00a084 ,0x1Cffffff }, - {0x0F00a080 ,0x1C000000 }, - {0x0F00a04C ,0x0000000C }, -//Memcontroller Default values - {0x0F007000 ,0x00010001 }, - {0x0F007004 ,0x01010100 }, - {0x0F007008 ,0x01000001 }, - {0x0F00700c ,0x00000000 }, - {0x0F007010 ,0x01000000 }, - {0x0F007014 ,0x01000100 }, - {0x0F007018 ,0x01000000 }, - {0x0F00701c ,0x01020001 },// POP - 0x00020001 Normal 0x01020001 - {0x0F007020 ,0x04030107 },//Normal - 0x04030107 POP - 0x05030107 - {0x0F007024 ,0x02000007 }, - {0x0F007028 ,0x02020202 }, - {0x0F00702c ,0x0206060a },//ROB- 0x0205050a,//0x0206060a - {0x0F007030 ,0x05000000 }, - {0x0F007034 ,0x00000003 }, - {0x0F007038 ,0x110a0200 },//ROB - 0x110a0200,//0x180a0200,// 0x1f0a0200 - {0x0F00703C ,0x02101010 },//ROB - 0x02101010,//0x02101018}, - {0x0F007040 ,0x45751200 },//ROB - 0x45751200,//0x450f1200}, - {0x0F007044 ,0x110a0d00 },//ROB - 0x110a0d00//0x111f0d00 - {0x0F007048 ,0x081b0306 }, - {0x0F00704c ,0x00000000 }, - {0x0F007050 ,0x0000001c }, - {0x0F007054 ,0x00000000 }, - {0x0F007058 ,0x00000000 }, - {0x0F00705c ,0x00000000 }, - {0x0F007060 ,0x0010246c }, - {0x0F007064 ,0x00000010 }, - {0x0F007068 ,0x00000000 }, - {0x0F00706c ,0x00000001 }, - {0x0F007070 ,0x00007000 }, - {0x0F007074 ,0x00000000 }, - {0x0F007078 ,0x00000000 }, - {0x0F00707C ,0x00000000 }, - {0x0F007080 ,0x00000000 }, - {0x0F007084 ,0x00000000 }, -//# Enable BW improvement within memory controller - {0x0F007094 ,0x00000104 }, -//# Enable 2 ports within X-bar - {0x0F00A000 ,0x00000016 }, -//# Enable start bit within memory controller - {0x0F007018 ,0x01010000 } - }; -//80Mhz -#define T3_SKIP_CLOCK_PROGRAM_DUMP_80MHZ 10 //index for 0x0F007000 -static struct bcm_ddr_setting asT3_DDRSetting80MHz[]= {// # DPLL Clock Setting - {0x0f000810 ,0x00000F95 }, - {0x0f000820 ,0x07f1ffff }, - {0x0f000860 ,0x00000000 }, - {0x0f000880 ,0x000003DD }, - {0x0F00a044 ,0x1fffffff }, - {0x0F00a040 ,0x1f000000 }, - {0x0F00a084 ,0x1Cffffff }, - {0x0F00a080 ,0x1C000000 }, - {0x0F00a000 ,0x00000016 }, - {0x0F00a04C ,0x0000000C }, -//Memcontroller Default values - {0x0F007000 ,0x00010001 }, - {0x0F007004 ,0x01000000 }, - {0x0F007008 ,0x01000001 }, - {0x0F00700c ,0x00000000 }, - {0x0F007010 ,0x01000000 }, - {0x0F007014 ,0x01000100 }, - {0x0F007018 ,0x01000000 }, - {0x0F00701c ,0x01020000 }, - {0x0F007020 ,0x04020107 }, - {0x0F007024 ,0x00000007 }, - {0x0F007028 ,0x02020201 }, - {0x0F00702c ,0x0204040a }, - {0x0F007030 ,0x04000000 }, - {0x0F007034 ,0x00000002 }, - {0x0F007038 ,0x1F060200 }, - {0x0F00703C ,0x1C22221F }, - {0x0F007040 ,0x8A006600 }, - {0x0F007044 ,0x221a0800 }, - {0x0F007048 ,0x02690204 }, - {0x0F00704c ,0x00000000 }, - {0x0F007050 ,0x0000001c }, - {0x0F007054 ,0x00000000 }, - {0x0F007058 ,0x00000000 }, - {0x0F00705c ,0x00000000 }, - {0x0F007060 ,0x000A15D6 }, - {0x0F007064 ,0x0000000A }, - {0x0F007068 ,0x00000000 }, - {0x0F00706c ,0x00000001 }, - {0x0F007070 ,0x00004000 }, - {0x0F007074 ,0x00000000 }, - {0x0F007078 ,0x00000000 }, - {0x0F00707C ,0x00000000 }, - {0x0F007080 ,0x00000000 }, - {0x0F007084 ,0x00000000 }, - {0x0F007094 ,0x00000104 }, -//# Enable start bit within memory controller - {0x0F007018 ,0x01010000 } - }; -//100Mhz -#define T3_SKIP_CLOCK_PROGRAM_DUMP_100MHZ 13 //index for 0x0F007000 -static struct bcm_ddr_setting asT3_DDRSetting100MHz[]= {// # DPLL Clock Setting - {0x0F000800 ,0x00007008 }, - {0x0f000810 ,0x00000F95 }, - {0x0f000820 ,0x07F13E3F }, - {0x0f000860 ,0x00000000 }, - {0x0f000880 ,0x000003DD }, -// Changed source for X-bar and MIPS clock to APLL -//0x0f000840,0x0FFF1800, - {0x0f000840 ,0x0FFF1B00 }, - {0x0f000870 ,0x00000002 }, - {0x0F00a044 ,0x1fffffff }, - {0x0F00a040 ,0x1f000000 }, - {0x0F00a084 ,0x1Cffffff }, - {0x0F00a080 ,0x1C000000 }, - {0x0F00a04C ,0x0000000C }, -//# Enable 2 ports within X-bar - {0x0F00A000 ,0x00000016 }, -//Memcontroller Default values - {0x0F007000 ,0x00010001 }, - {0x0F007004 ,0x01010100 }, - {0x0F007008 ,0x01000001 }, - {0x0F00700c ,0x00000000 }, - {0x0F007010 ,0x01000000 }, - {0x0F007014 ,0x01000100 }, - {0x0F007018 ,0x01000000 }, - {0x0F00701c ,0x01020001 },// POP - 0x00020000 Normal 0x01020000 - {0x0F007020 ,0x04020107 },//Normal - 0x04030107 POP - 0x05030107 - {0x0F007024 ,0x00000007 }, - {0x0F007028 ,0x01020201 }, - {0x0F00702c ,0x0204040A }, - {0x0F007030 ,0x06000000 }, - {0x0F007034 ,0x00000004 }, - {0x0F007038 ,0x20080200 }, - {0x0F00703C ,0x02030320 }, - {0x0F007040 ,0x6E7F1200 }, - {0x0F007044 ,0x01190A00 }, - {0x0F007048 ,0x06120305 },//0x02690204 // 0x06120305 - {0x0F00704c ,0x00000000 }, - {0x0F007050 ,0x0000001C }, - {0x0F007054 ,0x00000000 }, - {0x0F007058 ,0x00000000 }, - {0x0F00705c ,0x00000000 }, - {0x0F007060 ,0x00082ED6 }, - {0x0F007064 ,0x0000000A }, - {0x0F007068 ,0x00000000 }, - {0x0F00706c ,0x00000001 }, - {0x0F007070 ,0x00005000 }, - {0x0F007074 ,0x00000000 }, - {0x0F007078 ,0x00000000 }, - {0x0F00707C ,0x00000000 }, - {0x0F007080 ,0x00000000 }, - {0x0F007084 ,0x00000000 }, -//# Enable BW improvement within memory controller - {0x0F007094 ,0x00000104 }, -//# Enable start bit within memory controller - {0x0F007018 ,0x01010000 } - }; +#define MIP_CLOCK_REG 0x0F000820 -//Net T3B DDR Settings -//DDR INIT-133Mhz +/* DDR INIT-133Mhz */ +#define T3_SKIP_CLOCK_PROGRAM_DUMP_133MHz 12/* index for 0x0F00700 */ +static struct bcm_ddr_setting asT3_DDRSetting133MHz[] = {/* DPLL Clock Setting */ + {0x0F000800 ,0x00007212 }, + {0x0F000820 ,0x07F13FFF }, + {0x0F000810 ,0x00000F95 }, + {0x0F000860 ,0x00000000 }, + {0x0F000880 ,0x000003DD }, + {0x0F000840 ,0x0FFF1B00 },/* Changed Source for X-bar and MIPS Clock to APLL */ + {0xF0000870 ,0x00000002 }, + {0x0F00A044 ,0x1FFFFFFF }, + {0x0F00A040 ,0x1F000000 }, + {0x0F00A084 ,0x1CFFFFFF }, + {0x0F00A080 ,0x1C000000 }, + {0x0F00A04C ,0x0000000C }, + {0x0F007000 ,0x00010001 },/* Memcontroller Default Values */ + {0x0F007004 ,0x01010100 }, + {0x0F007008 ,0x01000001 }, + {0x0F00700C ,0x00000000 }, + {0x0F007010 ,0x01000000 }, + {0x0F007014 ,0x01000100 }, + {0x0F007018 ,0x01000000 }, + {0x0F00701C ,0x01020001 },/* POP 0x00020001 Normal 0x01020001 */ + {0x0F007020 ,0x04030107 },/* POP 0x05030107 Normal 0x04030107 */ + {0x0F007024 ,0x02000007 }, + {0x0F007028 ,0x02020202 }, + {0x0F00702C ,0x0206060A },/* ROB 0x025050A,0x0206060A */ + {0x0F007030 ,0x05000000 }, + {0x0F007034 ,0x00000003 }, + {0x0F007038 ,0x110A0200 },/* ROB 0x110A0200,0x180A0200,0x1F0A0200 */ + {0x0F00703C ,0x02101010 },/* ROB 0x02101010,0x02101018 */ + {0x0F007040 ,0x45751200 },/* ROB 0x45751200,0x450F1200 */ + {0x0F007044 ,0x110A0D00 },/* ROB 0x110A0D00,0x111F0D00 */ + {0x0F007048 ,0x081B0306 }, + {0x0F00704C ,0x00000000 }, + {0x0F007050 ,0x0000001C }, + {0x0F007054 ,0x00000000 }, + {0x0F007058 ,0x00000000 }, + {0x0F00705C ,0x00000000 }, + {0x0F007060 ,0x0010246C }, + {0x0F007064 ,0x00000010 }, + {0x0F007068 ,0x00000000 }, + {0x0F00706C ,0x00000001 }, + {0x0F007070 ,0x00007000 }, + {0x0F007074 ,0x00000000 }, + {0x0F007078 ,0x00000000 }, + {0x0F00707C ,0x00000000 }, + {0x0F007080 ,0x00000000 }, + {0x0F007084 ,0x00000000 }, + {0x0F007094 ,0x00000104 },/* Enable BW Improvement w/in Memory Controller */ + {0x0F00A000 ,0x00000016 },/* Enable 2 Ports w/in X-bar */ + {0x0F007018 ,0x01010000 },/* Enable Start Bit w/in Memory Controller */ +}; +/* 80mhz */ +#define T3_SKIP_CLOCK_PROGRAM_DUMP_80MHZ 10/* index for 0x0F007000 */ +static struct bcm_ddr_setting asT3_DDRSetting80Mhz[] = {/* DPLL Clock Setting */ + {0x0F000810 ,0x00000F95 }, + {0x0F000820 ,0x07F1FFFF }, + {0x0F000860 ,0x00000000 }, + {0x0F000880 ,0x000003DD }, + {0x0F00A044 ,0x1FFFFFFF }, + {0x0F00A040 ,0x1F000000 }, + {0x0F00A084 ,0x1CFFFFFF }, + {0x0F00A080 ,0x1C000000 }, + {0x0F00A000 ,0x00000016 }, + {0x0F00A04C ,0x0000000C }, + {0x0F007000 ,0x00010001 },/* Memcontroller Defult Values */ + {0x0F007004 ,0x01000000 }, + {0x0F007008 ,0x01000001 }, + {0x0F00700C ,0x00000000 }, + {0x0F007010 ,0x01000000 }, + {0x0F007014 ,0x01000100 }, + {0x0F007018 ,0x01000000 }, + {0x0F00700C ,0x00000000 }, + {0x0F007020 ,0x04020107 }, + {0x0F007024 ,0x00000007 }, + {0x0F007028 ,0x02020201 }, + {0x0F00702C ,0x0204040A }, + {0x0F007030 ,0x04000000 }, + {0x0F007034 ,0x00000002 }, + {0x0F007038 ,0x1F060200 }, + {0x0F00703C ,0x1C22221F }, + {0x0F007040 ,0xBA006600 }, + {0x0F007044 ,0x221A0800 }, + {0x0F007048 ,0x02690204 }, + {0x0F00704C ,0x00000000 }, + {0x0F007050 ,0x0000001C }, + {0x0F007054 ,0x00000000 }, + {0x0F007058 ,0x00000000 }, + {0x0F00705C ,0x00000000 }, + {0x0F007060 ,0x000A15D6 }, + {0x0F007064 ,0x0000000A }, + {0x0F007068 ,0x00000000 }, + {0x0F00706C ,0x00000001 }, + {0x0F007070 ,0x00004000 }, + {0x0F007074 ,0x0000000A }, + {0x0F007078 ,0x00000000 }, + {0x0F00707C ,0x00000000 }, + {0x0F007080 ,0x00000000 }, + {0x0F007084 ,0x00000000 }, + {0x0F007094 ,0x00000104 }, + {0x0F007018 ,0x01010000 }/* Enable Start Bit w/in memory controller */ +}; +/* 100MHz-T3 */ +#define T3_SKIP_CLOCK_PROGRAM_DUMP_100MHZ 13/* index for 0x0F007000 */ +static struct bcm_ddr_setting asT3_DDRSetting100MHz[] = {/* DPLL Clock Setting */ + {0x0F000800 ,0x00007008 }, + {0x0F000810 ,0x00000F95 }, + {0x0F000820 ,0x07F13E3F }, + {0x0F000860 ,0x00000000 }, + {0x0F000880 ,0x000003DD }, + {0x0F000840 ,0x0FFF1B00 },/* Changed Source for X-bar and MIPS Clock to APLL */ + {0x0F000870 ,0x00000002 }, + {0x0F00A044 ,0x1FFFFFFF }, + {0x0F00A040 ,0x1F000000 }, + {0x0F00A084 ,0x1CFFFFFF }, + {0x0F00A080 ,0x1C000000 }, + {0x0F00A04C ,0x0000000C }, + {0x0F00A000 ,0x00000016 },/* Enable 2 Ports w/in X-bar */ + {0x0F007000 ,0x00010001 },/* Memcontroller Default Values */ + {0x0F007004 ,0x01010100 }, + {0x0F007008 ,0x01000001 }, + {0x0F00700C ,0x00000000 }, + {0x0F007010 ,0x10000000 }, + {0x0F007014 ,0x01000100 }, + {0x0F007018 ,0x01000000 }, + {0x0F00701C ,0x01020001 },/* POP 0x00020000 Normal 0x01020000 */ + {0x0F007020 ,0x04040107 },/* POP 0x05030107 Normal 0x04030107 */ + {0x0F007024 ,0x00000007 }, + {0x0F007028 ,0x01020201 }, + {0x0F00702C ,0x0200404A }, + {0x0F007030 ,0x06000000 }, + {0x0F007034 ,0x00000004 }, + {0x0F007038 ,0x20080200 }, + {0x0F00703C ,0x20300320 }, + {0x0F007040 ,0x6E7F1200 }, + {0x0F007044 ,0x01190A00 }, + {0x0F007048 ,0x06120305 }, + {0x0F00704C ,0x00000000 }, + {0x0F007050 ,0x0000001C }, + {0x0F007054 ,0x00000000 }, + {0x0F007058 ,0x00000000 }, + {0x0F00705C ,0x00000000 }, + {0x0F007060 ,0x00082ED6 }, + {0x0F007064 ,0x0000000A }, + {0x0F007068 ,0x00000000 }, + {0x0F00706C ,0x00000001 }, + {0x0F007070 ,0x00005000 }, + {0x0F007074 ,0x00000000 }, + {0x0F007078 ,0x00000000 }, + {0x0F00707C ,0x00000000 }, + {0x0F007080 ,0x00000000 }, + {0x0F007084 ,0x00000000 }, + {0x0F007094 ,0x00000140 },/* Enable BW Improvement w/in Memcontroller */ + {0x0F007018 ,0x10100000 }/* Enable Start Bit w/in Memcontroller */ +}; +/* 266Mhz-DPLL */ static struct bcm_ddr_setting asDPLL_266MHZ[] = { - {0x0F000800 ,0x00007212 }, - {0x0f000820 ,0x07F13FFF }, - {0x0f000810 ,0x00000F95 }, - {0x0f000860 ,0x00000000 }, - {0x0f000880 ,0x000003DD }, -// Changed source for X-bar and MIPS clock to APLL - {0x0f000840 ,0x0FFF1B00 }, - {0x0f000870 ,0x00000002 } - }; - -#define T3B_SKIP_CLOCK_PROGRAM_DUMP_133MHZ 11 //index for 0x0F007000 -static struct bcm_ddr_setting asT3B_DDRSetting133MHz[] = {// # DPLL Clock Setting - {0x0f000810 ,0x00000F95 }, - {0x0f000810 ,0x00000F95 }, - {0x0f000810 ,0x00000F95 }, - {0x0f000820 ,0x07F13652 }, - {0x0f000840 ,0x0FFF0800 }, -// Changed source for X-bar and MIPS clock to APLL - {0x0f000880 ,0x000003DD }, - {0x0f000860 ,0x00000000 }, -// Changed source for X-bar and MIPS clock to APLL - {0x0F00a044 ,0x1fffffff }, - {0x0F00a040 ,0x1f000000 }, - {0x0F00a084 ,0x1Cffffff }, - {0x0F00a080 ,0x1C000000 }, -//# Enable 2 ports within X-bar - {0x0F00A000 ,0x00000016 }, -//Memcontroller Default values - {0x0F007000 ,0x00010001 }, - {0x0F007004 ,0x01010100 }, - {0x0F007008 ,0x01000001 }, - {0x0F00700c ,0x00000000 }, - {0x0F007010 ,0x01000000 }, - {0x0F007014 ,0x01000100 }, - {0x0F007018 ,0x01000000 }, - {0x0F00701c ,0x01020001 },// POP - 0x00020001 Normal 0x01020001 - {0x0F007020 ,0x04030107 },//Normal - 0x04030107 POP - 0x05030107 - {0x0F007024 ,0x02000007 }, - {0x0F007028 ,0x02020202 }, - {0x0F00702c ,0x0206060a },//ROB- 0x0205050a,//0x0206060a - {0x0F007030 ,0x05000000 }, - {0x0F007034 ,0x00000003 }, - {0x0F007038 ,0x130a0200 },//ROB - 0x110a0200,//0x180a0200,// 0x1f0a0200 - {0x0F00703C ,0x02101012 },//ROB - 0x02101010,//0x02101018}, - {0x0F007040 ,0x457D1200 },//ROB - 0x45751200,//0x450f1200}, - {0x0F007044 ,0x11130d00 },//ROB - 0x110a0d00//0x111f0d00 - {0x0F007048 ,0x040D0306 }, - {0x0F00704c ,0x00000000 }, - {0x0F007050 ,0x0000001c }, - {0x0F007054 ,0x00000000 }, - {0x0F007058 ,0x00000000 }, - {0x0F00705c ,0x00000000 }, - {0x0F007060 ,0x0010246c }, - {0x0F007064 ,0x00000012 }, - {0x0F007068 ,0x00000000 }, - {0x0F00706c ,0x00000001 }, - {0x0F007070 ,0x00007000 }, - {0x0F007074 ,0x00000000 }, - {0x0F007078 ,0x00000000 }, - {0x0F00707C ,0x00000000 }, - {0x0F007080 ,0x00000000 }, - {0x0F007084 ,0x00000000 }, -//# Enable BW improvement within memory controller - {0x0F007094 ,0x00000104 }, -//# Enable start bit within memory controller - {0x0F007018 ,0x01010000 }, - }; - -#define T3B_SKIP_CLOCK_PROGRAM_DUMP_80MHZ 9 //index for 0x0F007000 -static struct bcm_ddr_setting asT3B_DDRSetting80MHz[] = {// # DPLL Clock Setting - {0x0f000810 ,0x00000F95 }, - {0x0f000820 ,0x07F13FFF }, - {0x0f000840 ,0x0FFF1F00 }, - {0x0f000880 ,0x000003DD }, - {0x0f000860 ,0x00000000 }, - - {0x0F00a044 ,0x1fffffff }, - {0x0F00a040 ,0x1f000000 }, - {0x0F00a084 ,0x1Cffffff }, - {0x0F00a080 ,0x1C000000 }, - {0x0F00a000 ,0x00000016 }, -//Memcontroller Default values - {0x0F007000 ,0x00010001 }, - {0x0F007004 ,0x01000000 }, - {0x0F007008 ,0x01000001 }, - {0x0F00700c ,0x00000000 }, - {0x0F007010 ,0x01000000 }, - {0x0F007014 ,0x01000100 }, - {0x0F007018 ,0x01000000 }, - {0x0F00701c ,0x01020000 }, - {0x0F007020 ,0x04020107 }, - {0x0F007024 ,0x00000007 }, - {0x0F007028 ,0x02020201 }, - {0x0F00702c ,0x0204040a }, - {0x0F007030 ,0x04000000 }, - {0x0F007034 ,0x02000002 }, - {0x0F007038 ,0x1F060202 }, - {0x0F00703C ,0x1C22221F }, - {0x0F007040 ,0x8A006600 }, - {0x0F007044 ,0x221a0800 }, - {0x0F007048 ,0x02690204 }, - {0x0F00704c ,0x00000000 }, - {0x0F007050 ,0x0100001c }, - {0x0F007054 ,0x00000000 }, - {0x0F007058 ,0x00000000 }, - {0x0F00705c ,0x00000000 }, - {0x0F007060 ,0x000A15D6 }, - {0x0F007064 ,0x0000000A }, - {0x0F007068 ,0x00000000 }, - {0x0F00706c ,0x00000001 }, - {0x0F007070 ,0x00004000 }, - {0x0F007074 ,0x00000000 }, - {0x0F007078 ,0x00000000 }, - {0x0F00707C ,0x00000000 }, - {0x0F007080 ,0x00000000 }, - {0x0F007084 ,0x00000000 }, - {0x0F007094 ,0x00000104 }, -//# Enable start bit within memory controller - {0x0F007018 ,0x01010000 } - }; - -//100Mhz -#define T3B_SKIP_CLOCK_PROGRAM_DUMP_100MHZ 9 //index for 0x0F007000 -static struct bcm_ddr_setting asT3B_DDRSetting100MHz[] = {// # DPLL Clock Setting - {0x0f000810 ,0x00000F95 }, - {0x0f000820 ,0x07F1369B }, - {0x0f000840 ,0x0FFF0800 }, - {0x0f000880 ,0x000003DD }, - {0x0f000860 ,0x00000000 }, - {0x0F00a044 ,0x1fffffff }, - {0x0F00a040 ,0x1f000000 }, - {0x0F00a084 ,0x1Cffffff }, - {0x0F00a080 ,0x1C000000 }, -//# Enable 2 ports within X-bar - {0x0F00A000 ,0x00000016 }, -//Memcontroller Default values - {0x0F007000 ,0x00010001 }, - {0x0F007004 ,0x01010100 }, - {0x0F007008 ,0x01000001 }, - {0x0F00700c ,0x00000000 }, - {0x0F007010 ,0x01000000 }, - {0x0F007014 ,0x01000100 }, - {0x0F007018 ,0x01000000 }, - {0x0F00701c ,0x01020000 },// POP - 0x00020000 Normal 0x01020000 - {0x0F007020 ,0x04020107 },//Normal - 0x04030107 POP - 0x05030107 - {0x0F007024 ,0x00000007 }, - {0x0F007028 ,0x01020201 }, - {0x0F00702c ,0x0204040A }, - {0x0F007030 ,0x06000000 }, - {0x0F007034 ,0x02000004 }, - {0x0F007038 ,0x20080200 }, - {0x0F00703C ,0x02030320 }, - {0x0F007040 ,0x6E7F1200 }, - {0x0F007044 ,0x01190A00 }, - {0x0F007048 ,0x06120305 },//0x02690204 // 0x06120305 - {0x0F00704c ,0x00000000 }, - {0x0F007050 ,0x0100001C }, - {0x0F007054 ,0x00000000 }, - {0x0F007058 ,0x00000000 }, - {0x0F00705c ,0x00000000 }, - {0x0F007060 ,0x00082ED6 }, - {0x0F007064 ,0x0000000A }, - {0x0F007068 ,0x00000000 }, - {0x0F00706c ,0x00000001 }, - {0x0F007070 ,0x00005000 }, - {0x0F007074 ,0x00000000 }, - {0x0F007078 ,0x00000000 }, - {0x0F00707C ,0x00000000 }, - {0x0F007080 ,0x00000000 }, - {0x0F007084 ,0x00000000 }, -//# Enable BW improvement within memory controller - {0x0F007094 ,0x00000104 }, -//# Enable start bit within memory controller - {0x0F007018 ,0x01010000 } - }; - - -#define T3LP_SKIP_CLOCK_PROGRAM_DUMP_133MHZ 9 //index for 0x0F007000 -static struct bcm_ddr_setting asT3LP_DDRSetting133MHz[]= {// # DPLL Clock Setting - {0x0f000820 ,0x03F1365B }, - {0x0f000810 ,0x00002F95 }, - {0x0f000880 ,0x000003DD }, -// Changed source for X-bar and MIPS clock to APLL - {0x0f000840 ,0x0FFF0000 }, - {0x0f000860 ,0x00000000 }, - {0x0F00a044 ,0x1fffffff }, - {0x0F00a040 ,0x1f000000 }, - {0x0F00a084 ,0x1Cffffff }, - {0x0F00a080 ,0x1C000000 }, - {0x0F00A000 ,0x00000016 }, -//Memcontroller Default values - {0x0F007000 ,0x00010001 }, - {0x0F007004 ,0x01010100 }, - {0x0F007008 ,0x01000001 }, - {0x0F00700c ,0x00000000 }, - {0x0F007010 ,0x01000000 }, - {0x0F007014 ,0x01000100 }, - {0x0F007018 ,0x01000000 }, - {0x0F00701c ,0x01020001 },// POP - 0x00020001 Normal 0x01020001 - {0x0F007020 ,0x04030107 },//Normal - 0x04030107 POP - 0x05030107 - {0x0F007024 ,0x02000007 }, - {0x0F007028 ,0x02020200 }, - {0x0F00702c ,0x0206060a },//ROB- 0x0205050a,//0x0206060a - {0x0F007030 ,0x05000000 }, - {0x0F007034 ,0x00000003 }, - {0x0F007038 ,0x200a0200 },//ROB - 0x110a0200,//0x180a0200,// 0x1f0a0200 - {0x0F00703C ,0x02101020 },//ROB - 0x02101010,//0x02101018, - {0x0F007040 ,0x45711200 },//ROB - 0x45751200,//0x450f1200, - {0x0F007044 ,0x110D0D00 },//ROB - 0x110a0d00//0x111f0d00 - {0x0F007048 ,0x04080306 }, - {0x0F00704c ,0x00000000 }, - {0x0F007050 ,0x0100001c }, - {0x0F007054 ,0x00000000 }, - {0x0F007058 ,0x00000000 }, - {0x0F00705c ,0x00000000 }, - {0x0F007060 ,0x0010245F }, - {0x0F007064 ,0x00000010 }, - {0x0F007068 ,0x00000000 }, - {0x0F00706c ,0x00000001 }, - {0x0F007070 ,0x00007000 }, - {0x0F007074 ,0x00000000 }, - {0x0F007078 ,0x00000000 }, - {0x0F00707C ,0x00000000 }, - {0x0F007080 ,0x00000000 }, - {0x0F007084 ,0x00000000 }, - {0x0F007088 ,0x01000001 }, - {0x0F00708c ,0x00000101 }, - {0x0F007090 ,0x00000000 }, -//# Enable BW improvement within memory controller - {0x0F007094 ,0x00040000 }, - {0x0F007098 ,0x00000000 }, - {0x0F0070c8 ,0x00000104 }, -//# Enable 2 ports within X-bar -//# Enable start bit within memory controller - {0x0F007018 ,0x01010000 } + {0x0F000800 ,0x00007212 }, + {0x0F000820 ,0x07F13FFF }, + {0x0F000810 ,0x00000F95 }, + {0x0F000860 ,0x00000000 }, + {0x0F000880 ,0x000003DD }, + {0x0F000840 ,0x0FFF1B00 },/* Changed Source for X-bar and MIPS clock to APLL */ + {0x0F000870 ,0x00000002 }, }; - -#define T3LP_SKIP_CLOCK_PROGRAM_DUMP_100MHZ 11 //index for 0x0F007000 -static struct bcm_ddr_setting asT3LP_DDRSetting100MHz[]= {// # DPLL Clock Setting - {0x0f000810 ,0x00002F95 }, - {0x0f000820 ,0x03F1369B }, - {0x0f000840 ,0x0fff0000 }, - {0x0f000860 ,0x00000000 }, - {0x0f000880 ,0x000003DD }, -// Changed source for X-bar and MIPS clock to APLL - {0x0f000840 ,0x0FFF0000 }, - {0x0F00a044 ,0x1fffffff }, - {0x0F00a040 ,0x1f000000 }, - {0x0F00a084 ,0x1Cffffff }, - {0x0F00a080 ,0x1C000000 }, -//Memcontroller Default values - {0x0F007000 ,0x00010001 }, - {0x0F007004 ,0x01010100 }, - {0x0F007008 ,0x01000001 }, - {0x0F00700c ,0x00000000 }, - {0x0F007010 ,0x01000000 }, - {0x0F007014 ,0x01000100 }, - {0x0F007018 ,0x01000000 }, - {0x0F00701c ,0x01020000 },// POP - 0x00020001 Normal 0x01020001 - {0x0F007020 ,0x04020107 },//Normal - 0x04030107 POP - 0x05030107 - {0x0F007024 ,0x00000007 }, - {0x0F007028 ,0x01020200 }, - {0x0F00702c ,0x0204040a },//ROB- 0x0205050a,//0x0206060a - {0x0F007030 ,0x06000000 }, - {0x0F007034 ,0x00000004 }, - {0x0F007038 ,0x1F080200 },//ROB - 0x110a0200,//0x180a0200,// 0x1f0a0200 - {0x0F00703C ,0x0203031F },//ROB - 0x02101010,//0x02101018, - {0x0F007040 ,0x6e001200 },//ROB - 0x45751200,//0x450f1200, - {0x0F007044 ,0x011a0a00 },//ROB - 0x110a0d00//0x111f0d00 - {0x0F007048 ,0x03000305 }, - {0x0F00704c ,0x00000000 }, - {0x0F007050 ,0x0100001c }, - {0x0F007054 ,0x00000000 }, - {0x0F007058 ,0x00000000 }, - {0x0F00705c ,0x00000000 }, - {0x0F007060 ,0x00082ED6 }, - {0x0F007064 ,0x0000000A }, - {0x0F007068 ,0x00000000 }, - {0x0F00706c ,0x00000001 }, - {0x0F007070 ,0x00005000 }, - {0x0F007074 ,0x00000000 }, - {0x0F007078 ,0x00000000 }, - {0x0F00707C ,0x00000000 }, - {0x0F007080 ,0x00000000 }, - {0x0F007084 ,0x00000000 }, - {0x0F007088 ,0x01000001 }, - {0x0F00708c ,0x00000101 }, - {0x0F007090 ,0x00000000 }, - {0x0F007094 ,0x00010000 }, - {0x0F007098 ,0x00000000 }, - {0x0F0070C8 ,0x00000104 }, -//# Enable 2 ports within X-bar - {0x0F00A000 ,0x00000016 }, -//# Enable start bit within memory controller - {0x0F007018 ,0x01010000 } +/* 133MHz-T3B */ +#define T3B_SKIP_CLOCK_PROGRAM_DUMP_133MHZ 11/* index for 0x0F00700 */ +static struct bcm_ddr_setting asT3B_DDRSetting133MGZ[] = {/* DPLL Clock Setting */ + {0x0F000810 ,0x00000F95 }, + {0x0F000820 ,0x07F13652 }, + {0x0F000840 ,0x0FFF0800 }, + {0x0F00A000 ,0x00000016 },/* Enable 2 Ports w/in X-bar */ + {0x0F007000 ,0x00010001 },/* Memcontroller Default Values */ + {0x0F007004 ,0x01010100 }, + {0x0F007008 ,0x01000001 }, + {0x0F00700C ,0x00000000 }, + {0x0F007010 ,0x01000000 }, + {0x0F007014 ,0x01000100 }, + {0x0F007018 ,0x01000000 }, + {0x0F00701C ,0x01020001 },/* POP 0x00020001 Normal 0x01020001 */ + {0x0F007020 ,0x04030107 },/* POP 0x05030107 Normal 0x04030107 */ + {0x0F007024 ,0x02000007 }, + {0x0F007028 ,0x02020202 }, + {0x0F00702C ,0x0206060A },/* ROB 0x0205050A,0x0206060A */ + {0x0F007030 ,0x05000000 }, + {0x0F007034 ,0x00000003 }, + {0x0F007038 ,0x130A0200 },/* ROB 0x110A0200,0x180A0200,0x1F0A0200 */ + {0x0F00703C ,0x02101012 },/* ROB 0x02101010,0x02101018 */ + {0x0F007040 ,0x457D1200 },/* ROB 0x45751200,0x450F1200 */ + {0x0F007044 ,0x11130D00 },/* ROB 0x110A0D00,0x111F0D00 */ + {0x0F007048 ,0x040D0306 }, + {0x0F00704C ,0x00000000 }, + {0x0F007050 ,0x0000001C }, + {0x0F007054 ,0x00000000 }, + {0x0F007058 ,0x00000000 }, + {0x0F00705C ,0x00000000 }, + {0x0F007060 ,0x0010246C }, + {0x0F007064 ,0x00000012 }, + {0x0F007068 ,0x00000000 }, + {0x0F00706C ,0x00000001 }, + {0x0F007070 ,0x00007000 }, + {0x0F007074 ,0x00000000 }, + {0x0F007078 ,0x00000000 }, + {0x0F00707C ,0x00000000 }, + {0x0F007080 ,0x00000000 }, + {0x0F007084 ,0x00000000 }, + {0x0F007094 ,0x00000104 },/* Enable BW Improvement w/in Memcontroller */ + {0x0F007018 ,0x01010000 }/* Enable Start Bit w/in Memcontroller */ }; - -#define T3LP_SKIP_CLOCK_PROGRAM_DUMP_80MHZ 9 //index for 0x0F007000 -static struct bcm_ddr_setting asT3LP_DDRSetting80MHz[]= {// # DPLL Clock Setting - {0x0f000820 ,0x07F13FFF }, - {0x0f000810 ,0x00002F95 }, - {0x0f000860 ,0x00000000 }, - {0x0f000880 ,0x000003DD }, - {0x0f000840 ,0x0FFF1F00 }, - {0x0F00a044 ,0x1fffffff }, - {0x0F00a040 ,0x1f000000 }, - {0x0F00a084 ,0x1Cffffff }, - {0x0F00a080 ,0x1C000000 }, - {0x0F00A000 ,0x00000016 }, - {0x0f007000 ,0x00010001 }, - {0x0f007004 ,0x01000000 }, - {0x0f007008 ,0x01000001 }, - {0x0f00700c ,0x00000000 }, - {0x0f007010 ,0x01000000 }, - {0x0f007014 ,0x01000100 }, - {0x0f007018 ,0x01000000 }, - {0x0f00701c ,0x01020000 }, - {0x0f007020 ,0x04020107 }, - {0x0f007024 ,0x00000007 }, - {0x0f007028 ,0x02020200 }, - {0x0f00702c ,0x0204040a }, - {0x0f007030 ,0x04000000 }, - {0x0f007034 ,0x00000002 }, - {0x0f007038 ,0x1d060200 }, - {0x0f00703c ,0x1c22221d }, - {0x0f007040 ,0x8A116600 }, - {0x0f007044 ,0x222d0800 }, - {0x0f007048 ,0x02690204 }, - {0x0f00704c ,0x00000000 }, - {0x0f007050 ,0x0100001c }, - {0x0f007054 ,0x00000000 }, - {0x0f007058 ,0x00000000 }, - {0x0f00705c ,0x00000000 }, - {0x0f007060 ,0x000A15D6 }, - {0x0f007064 ,0x0000000A }, - {0x0f007068 ,0x00000000 }, - {0x0f00706c ,0x00000001 }, - {0x0f007070 ,0x00004000 }, - {0x0f007074 ,0x00000000 }, - {0x0f007078 ,0x00000000 }, - {0x0f00707c ,0x00000000 }, - {0x0f007080 ,0x00000000 }, - {0x0f007084 ,0x00000000 }, - {0x0f007088 ,0x01000001 }, - {0x0f00708c ,0x00000101 }, - {0x0f007090 ,0x00000000 }, - {0x0f007094 ,0x00010000 }, - {0x0f007098 ,0x00000000 }, - {0x0F0070C8 ,0x00000104 }, - {0x0F007018 ,0x01010000 } +/* 80MHz-T3B */ +#define T3B_SKIP_CLOCK_PROGRAM_DUMP_80MHZ 9/* index for 0x0F007000 */ +static struct bcm_ddr_setting asT3B_DDRSetting80MHZ[] = {/* DPLL Clock Setting */ + {0x0F000810 ,0x00000F95 }, + {0x0F000820 ,0x07F13FFF }, + {0x0F000840 ,0x0FFF1F00 }, + {0x0F000880 ,0x000003DD }, + {0x0F000860 ,0x00000000 }, + {0x0F00A044 ,0x1FFFFFFF }, + {0x0F00a040 ,0x1f000000 }, + {0x0F00A084 ,0x1CFFFFFF }, + {0x0F00A080 ,0x1C000000 }, + {0x0F00A000 ,0x00000016 }, + {0x0F007000 ,0x00010001 },/* Memcontroller Default Values */ + {0x0F007004 ,0x01000000 }, + {0x0F007008 ,0x01000001 }, + {0x0F00700C ,0x00000000 }, + {0x0F007010 ,0x01000000 }, + {0x0F007014 ,0x01000100 }, + {0x0F007018 ,0x01000000 }, + {0x0F00701C ,0x01020000 }, + {0x0F007020 ,0x04020107 }, + {0x0F007024 ,0x00000007 }, + {0x0F007028 ,0x02020201 }, + {0x0F00702C ,0x0204040A }, + {0x0F007030 ,0x04000000 }, + {0x0F007034 ,0x02000002 }, + {0x0F007038 ,0x1F060202 }, + {0x0F00703C ,0x1C22221F }, + {0x0F007040 ,0x8A006600 }, + {0x0F007044 ,0x221A0800 }, + {0x0F007048 ,0x02690204 }, + {0x0F00704C ,0x00000000 }, + {0x0F007050 ,0x0100001C }, + {0x0F007054 ,0x00000000 }, + {0x0F007058 ,0x00000000 }, + {0x0F00705C ,0x00000000 }, + {0x0F007060 ,0x000A15D6 }, + {0x0F007064 ,0x00000004 }, + {0x0F007068 ,0x00000000 }, + {0x0F00706C ,0x00000001 }, + {0x0F007070 ,0x00004000 }, + {0x0F007074 ,0x00000000 }, + {0x0F007078 ,0x00000000 }, + {0x0F00707C ,0x00000000 }, + {0x0F007080 ,0x00000000 }, + {0x0F007084 ,0x00000000 }, + {0x0F007094 ,0x00000104 }, + {0x0F007018 ,0x01010000 }/* Enable Start Bit w/in Memcontroller */ }; - - - - -///T3 LP-B (UMA-B) - -#define T3LPB_SKIP_CLOCK_PROGRAM_DUMP_160MHZ 7 //index for 0x0F007000 -static struct bcm_ddr_setting asT3LPB_DDRSetting160MHz[]= {// # DPLL Clock Setting - - {0x0f000820 ,0x03F137DB }, - {0x0f000810 ,0x01842795 }, - {0x0f000860 ,0x00000000 }, - {0x0f000880 ,0x000003DD }, - {0x0f000840 ,0x0FFF0400 }, - {0x0F00a044 ,0x1fffffff }, - {0x0F00a040 ,0x1f000000 }, - {0x0f003050 ,0x00000021 },//this is flash/eeprom clock divisor which set the flash clock to 20 MHz - {0x0F00a084 ,0x1Cffffff },//Now dump from her in internal memory - {0x0F00a080 ,0x1C000000 }, - {0x0F00A000 ,0x00000016 }, - {0x0f007000 ,0x00010001 }, - {0x0f007004 ,0x01000001 }, - {0x0f007008 ,0x01000101 }, - {0x0f00700c ,0x00000000 }, - {0x0f007010 ,0x01000100 }, - {0x0f007014 ,0x01000100 }, - {0x0f007018 ,0x01000000 }, - {0x0f00701c ,0x01020000 }, - {0x0f007020 ,0x04030107 }, - {0x0f007024 ,0x02000007 }, - {0x0f007028 ,0x02020200 }, - {0x0f00702c ,0x0206060a }, - {0x0f007030 ,0x050d0d00 }, - {0x0f007034 ,0x00000003 }, - {0x0f007038 ,0x170a0200 }, - {0x0f00703c ,0x02101012 }, - {0x0f007040 ,0x45161200 }, - {0x0f007044 ,0x11250c00 }, - {0x0f007048 ,0x04da0307 }, - {0x0f00704c ,0x00000000 }, - {0x0f007050 ,0x0000001c }, - {0x0f007054 ,0x00000000 }, - {0x0f007058 ,0x00000000 }, - {0x0f00705c ,0x00000000 }, - {0x0f007060 ,0x00142bb6 }, - {0x0f007064 ,0x20430014 }, - {0x0f007068 ,0x00000000 }, - {0x0f00706c ,0x00000001 }, - {0x0f007070 ,0x00009000 }, - {0x0f007074 ,0x00000000 }, - {0x0f007078 ,0x00000000 }, - {0x0f00707c ,0x00000000 }, - {0x0f007080 ,0x00000000 }, - {0x0f007084 ,0x00000000 }, - {0x0f007088 ,0x01000001 }, - {0x0f00708c ,0x00000101 }, - {0x0f007090 ,0x00000000 }, - {0x0f007094 ,0x00040000 }, - {0x0f007098 ,0x00000000 }, - {0x0F0070C8 ,0x00000104 }, - {0x0F007018 ,0x01010000 } +/* 100MHz-T3B */ +#define T3B_SKIP_CLOCK_PROGRAM_DUMP_100MHZ 9/* index for 0x0F007000 */ +static struct bcm_ddr_setting asT3B_DDRSetting100MHZ[] = {/* DPll Clock Setting */ + {0x0F000810 ,0x00000F95 }, + {0x0F000820 ,0x07F1369B }, + {0x0F000840 ,0x0FFF0800 }, + {0x0F000880 ,0x000003DD }, + {0x0F000860 ,0x00000000 }, + {0x0F00A044 ,0x1FFFFFFF }, + {0x0F00A040 ,0x1F000000 }, + {0x0F00A084 ,0x1CFFFFFF }, + {0x0F00A080 ,0x1C000000 }, + {0x0F00A000 ,0x00000016 },/* Enable 2 Ports w/in X-bar */ + {0x0F007000 ,0x00010001 },/* Memcontroller Default Values */ + {0x0F007004 ,0x01010100 }, + {0x0F007008 ,0x01000001 }, + {0x0F00700C ,0x00000000 }, + {0x0F007010 ,0x01000000 }, + {0x0F007014 ,0x01000100 }, + {0x0F007018 ,0x01000000 }, + {0x0F00701C ,0x01020000 }, + {0x0F007020 ,0x04020107 }, + {0x0F007024 ,0x00000007 }, + {0x0F007028 ,0x01020201 }, + {0x0F00702C ,0x0204040A }, + {0x0F007030 ,0x06000000 }, + {0x0F007034 ,0x02000004 }, + {0x0F007038 ,0x20080200 }, + {0x0F00703C ,0x02030320 }, + {0x0F007040 ,0x6E7F1200 }, + {0x0F007044 ,0x01190A00 }, + {0x0F007048 ,0x06120305 }, + {0x0F00704C ,0x00000000 }, + {0x0F007050 ,0x0100001C }, + {0x0F007054 ,0x00000000 }, + {0x0F007058 ,0x00000000 }, + {0x0F00705C ,0x00000000 }, + {0x0F007060 ,0x00082ED2 }, + {0x0F007064 ,0x0000000A }, + {0x0F007068 ,0x00000000 }, + {0x0F00706C ,0x00000001 }, + {0x0F007070 ,0x00005000 }, + {0x0F007074 ,0x00000000 }, + {0x0F007078 ,0x00000000 }, + {0x0F00707C ,0x00000000 }, + {0x0F007080 ,0x00000000 }, + {0x0F007084 ,0x00000000 }, + {0x0F007094 ,0x00000104 },/* Enable BW w/in Memcontroller */ + {0x0F007018 ,0x01010000 }/* Enable Start Bit w/in Memcontroller */ }; - - -#define T3LPB_SKIP_CLOCK_PROGRAM_DUMP_133MHZ 7 //index for 0x0F007000 -static struct bcm_ddr_setting asT3LPB_DDRSetting133MHz[]= {// # DPLL Clock Setting - {0x0f000820 ,0x03F1365B }, - {0x0f000810 ,0x00002F95 }, - {0x0f000880 ,0x000003DD }, -// Changed source for X-bar and MIPS clock to APLL - {0x0f000840 ,0x0FFF0000 }, - {0x0f000860 ,0x00000000 }, - {0x0F00a044 ,0x1fffffff }, - {0x0F00a040 ,0x1f000000 }, - {0x0f003050 ,0x00000021 },//flash/eeprom clock divisor which set the flash clock to 20 MHz - {0x0F00a084 ,0x1Cffffff },//dump from here in internal memory - {0x0F00a080 ,0x1C000000 }, - {0x0F00A000 ,0x00000016 }, -//Memcontroller Default values - {0x0F007000 ,0x00010001 }, - {0x0F007004 ,0x01010100 }, - {0x0F007008 ,0x01000001 }, - {0x0F00700c ,0x00000000 }, - {0x0F007010 ,0x01000000 }, - {0x0F007014 ,0x01000100 }, - {0x0F007018 ,0x01000000 }, - {0x0F00701c ,0x01020001 },// POP - 0x00020001 Normal 0x01020001 - {0x0F007020 ,0x04030107 },//Normal - 0x04030107 POP - 0x05030107 - {0x0F007024 ,0x02000007 }, - {0x0F007028 ,0x02020200 }, - {0x0F00702c ,0x0206060a },//ROB- 0x0205050a,//0x0206060a - {0x0F007030 ,0x05000000 }, - {0x0F007034 ,0x00000003 }, - {0x0F007038 ,0x190a0200 },//ROB - 0x110a0200,//0x180a0200,// 0x1f0a0200 - {0x0F00703C ,0x02101017 },//ROB - 0x02101010,//0x02101018, - {0x0F007040 ,0x45171200 },//ROB - 0x45751200,//0x450f1200, - {0x0F007044 ,0x11290D00 },//ROB - 0x110a0d00//0x111f0d00 - {0x0F007048 ,0x04080306 }, - {0x0F00704c ,0x00000000 }, - {0x0F007050 ,0x0100001c }, - {0x0F007054 ,0x00000000 }, - {0x0F007058 ,0x00000000 }, - {0x0F00705c ,0x00000000 }, - {0x0F007060 ,0x0010245F }, - {0x0F007064 ,0x00000010 }, - {0x0F007068 ,0x00000000 }, - {0x0F00706c ,0x00000001 }, - {0x0F007070 ,0x00007000 }, - {0x0F007074 ,0x00000000 }, - {0x0F007078 ,0x00000000 }, - {0x0F00707C ,0x00000000 }, - {0x0F007080 ,0x00000000 }, - {0x0F007084 ,0x00000000 }, - {0x0F007088 ,0x01000001 }, - {0x0F00708c ,0x00000101 }, - {0x0F007090 ,0x00000000 }, -//# Enable BW improvement within memory controller - {0x0F007094 ,0x00040000 }, - {0x0F007098 ,0x00000000 }, - {0x0F0070c8 ,0x00000104 }, -//# Enable 2 ports within X-bar -//# Enable start bit within memory controller - {0x0F007018 ,0x01010000 } +/* 133MHz-T3LP */ +#define T3LP_SKIP_CLOCK_PROGRAM_DUMP_133MHZ 9/* index for 0x0F007000 */ +static struct bcm_ddr_setting asT3LP_DDRSetting133MHZ[] = {/* DPLL Clock Settings */ + {0x0F000820 ,0x03F1365B }, + {0x0F000810 ,0x00002F95 }, + {0x0F000880 ,0x000003DD }, + {0x0F000840 ,0x0FFF0000 },/* Changed Source for X-bar and MIPS clock to DPLL */ + {0x0F000860 ,0x00000000 }, + {0x0F00A044 ,0x1FFFFFFF }, + {0x0F00A040 ,0x1F000000 }, + {0x0F00A084 ,0x1CFFFFFF }, + {0x0F00A080 ,0x1C000000 }, + {0x0F00A000 ,0x00000016 }, + {0x0F007000 ,0x00110001 },/* Memcontroller DEfault Values */ + {0x0F007004 ,0x01010100 }, + {0x0F007008 ,0x01000001 }, + {0x0F00700C ,0x00000000 }, + {0x0F007010 ,0x01000000 }, + {0x0F007014 ,0x01000100 }, + {0x0F007018 ,0x01000000 }, + {0x0F00701C ,0x01020001 },/* POP 0x00020001 Normal 0x01020001 */ + {0x0F007020 ,0x04030107 },/* POP 0x05030107 Normal 0x04030107 */ + {0x0F007024 ,0x02000007 }, + {0x0F007028 ,0x02020200 }, + {0x0F00702C ,0x0206060A },/* ROB 0x0205050A,0x0206060A */ + {0x0F007030 ,0x05000000 }, + {0x0F007034 ,0x00000003 }, + {0x0F007038 ,0x200A0200 },/* ROB 0x110A0200,0x180A0200,0x1F0A0200 */ + {0x0F00703C ,0x02101020 },/* ROB 0x02101010,0x02101018 */ + {0x0F007040 ,0x45711200 },/* ROB 0x45751200,0x450F1200 */ + {0x0F007044 ,0x110D0D00 },/* ROB 0x110A0D00,0x111F0D00 */ + {0x0F007048 ,0x04080306 }, + {0x0F00704C ,0x00000000 }, + {0x0F007050 ,0x0100001C }, + {0x0F007054 ,0x00000000 }, + {0x0F007058 ,0x00000000 }, + {0x0F00705C ,0x00000000 }, + {0x0F007060 ,0x0010245F }, + {0x0F007064 ,0x00000010 }, + {0x0F007068 ,0x00000000 }, + {0x0F00706C ,0x00000001 }, + {0x0F007070 ,0x00007000 }, + {0x0F007074 ,0x00000000 }, + {0x0F007078 ,0x00000000 }, + {0x0F00707C ,0x00000000 }, + {0x0F007080 ,0x00000000 }, + {0x0F007084 ,0x00000000 }, + {0x0F007088 ,0x01000001 }, + {0x0F00708C ,0x00000101 }, + {0x0F007090 ,0x00000000 }, + {0x0F007094 ,0x00040000 },/* Enable BW Improvement w/in Memcontroller */ + {0x0F007098 ,0x00000000 }, + {0x0F0070C8 ,0x00000104 }, + {0x0F007018 ,0x01010000 }/* Enable Start Bit w/in Memcontroller */ }; - -#define T3LPB_SKIP_CLOCK_PROGRAM_DUMP_100MHZ 8 //index for 0x0F007000 -static struct bcm_ddr_setting asT3LPB_DDRSetting100MHz[]= {// # DPLL Clock Setting - {0x0f000810 ,0x00002F95 }, - {0x0f000820 ,0x03F1369B }, - {0x0f000840 ,0x0fff0000 }, - {0x0f000860 ,0x00000000 }, - {0x0f000880 ,0x000003DD }, -// Changed source for X-bar and MIPS clock to APLL - {0x0f000840 ,0x0FFF0000 }, - {0x0F00a044 ,0x1fffffff }, - {0x0F00a040 ,0x1f000000 }, - {0x0f003050 ,0x00000021 },//flash/eeprom clock divisor which set the flash clock to 20 MHz - {0x0F00a084 ,0x1Cffffff },//dump from here in internal memory - {0x0F00a080 ,0x1C000000 }, -//Memcontroller Default values - {0x0F007000 ,0x00010001 }, - {0x0F007004 ,0x01010100 }, - {0x0F007008 ,0x01000001 }, - {0x0F00700c ,0x00000000 }, - {0x0F007010 ,0x01000000 }, - {0x0F007014 ,0x01000100 }, - {0x0F007018 ,0x01000000 }, - {0x0F00701c ,0x01020000 },// POP - 0x00020001 Normal 0x01020001 - {0x0F007020 ,0x04020107 },//Normal - 0x04030107 POP - 0x05030107 - {0x0F007024 ,0x00000007 }, - {0x0F007028 ,0x01020200 }, - {0x0F00702c ,0x0204040a },//ROB- 0x0205050a,//0x0206060a - {0x0F007030 ,0x06000000 }, - {0x0F007034 ,0x00000004 }, - {0x0F007038 ,0x1F080200 },//ROB - 0x110a0200,//0x180a0200,// 0x1f0a0200 - {0x0F00703C ,0x0203031F },//ROB - 0x02101010,//0x02101018, - {0x0F007040 ,0x6e001200 },//ROB - 0x45751200,//0x450f1200, - {0x0F007044 ,0x011a0a00 },//ROB - 0x110a0d00//0x111f0d00 - {0x0F007048 ,0x03000305 }, - {0x0F00704c ,0x00000000 }, - {0x0F007050 ,0x0100001c }, - {0x0F007054 ,0x00000000 }, - {0x0F007058 ,0x00000000 }, - {0x0F00705c ,0x00000000 }, - {0x0F007060 ,0x00082ED6 }, - {0x0F007064 ,0x0000000A }, - {0x0F007068 ,0x00000000 }, - {0x0F00706c ,0x00000001 }, - {0x0F007070 ,0x00005000 }, - {0x0F007074 ,0x00000000 }, - {0x0F007078 ,0x00000000 }, - {0x0F00707C ,0x00000000 }, - {0x0F007080 ,0x00000000 }, - {0x0F007084 ,0x00000000 }, - {0x0F007088 ,0x01000001 }, - {0x0F00708c ,0x00000101 }, - {0x0F007090 ,0x00000000 }, - {0x0F007094 ,0x00010000 }, - {0x0F007098 ,0x00000000 }, - {0x0F0070C8 ,0x00000104 }, -//# Enable 2 ports within X-bar - {0x0F00A000 ,0x00000016 }, -//# Enable start bit within memory controller - {0x0F007018 ,0x01010000 } +/* 100MHz-T3LP */ +#define T3LP_SKIP_CLOCK_PROGRAM_DUMP_100MHZ 11/* index for 0x0F007000 */ +static struct bcm_ddr_setting asT3LP_DDRSetting100MHZ[] = {/* DPLL Clock Setting */ + {0x0F000810 ,0x00002F95 }, + {0x0F000820 ,0x03F1369B }, + {0x0F000840 ,0x0FFF0000 }, + {0x0F000860 ,0x00000000 }, + {0x0F000880 ,0x000003DD }, + {0x0F000840 ,0x0FFF0000 },/* Changed Source for X-bar and MIPS clock to APLL */ + {0x0F00A044 ,0x1FFFFFFF }, + {0x0F00A040 ,0x1F000000 }, + {0x0F00A084 ,0x1CFFFFFF }, + {0x0F00A080 ,0x1C000000 }, + {0x0F007000 ,0x00010001 },/* Memcontroller Default Values */ + {0x0F007004 ,0x01010100 }, + {0x0F007008 ,0x01000001 }, + {0x0F00700C ,0x00000000 }, + {0x0F007010 ,0x01000000 }, + {0x0F007014 ,0x01000100 }, + {0x0F007018 ,0x01000000 }, + {0x0F00701C ,0x01020000 },/* POP 0x00020001 Normal 0x01020001 */ + {0x0F007020 ,0x04020107 },/* POP 0x05030107 Normal 0x04030107 */ + {0x0F007024 ,0x00000007 }, + {0x0F007028 ,0x01020200 }, + {0x0F00702C ,0x0204040A },/* ROB 0x0205050A,0x0206060A */ + {0x0F007030 ,0x06000000 }, + {0x0F007034 ,0x00000004 }, + {0x0F007038 ,0x1F080200 },/* ROB 0x110A0200,0x080A0200,0x1F0A0200 */ + {0x0F00703C ,0x0203031F },/* ROB 0x02101010,0x02101018 */ + {0x0F007040 ,0x6E001200 },/* ROB 0x45751200,0x450F1200 */ + {0x0F007044 ,0x011A0A00 },/* ROB 0x110A0D00,0x111F0D00 */ + {0x0F007048 ,0x03000305 }, + {0x0F00704C ,0x00000000 }, + {0x0F007050 ,0x0100001C }, + {0x0F007054 ,0x00000000 }, + {0x0F007058 ,0x00000000 }, + {0x0F00705C ,0x00000000 }, + {0x0F007060 ,0x00082ED6 }, + {0x0F007064 ,0x0000000A }, + {0x0F007068 ,0x00000000 }, + {0x0F00706C ,0x00000001 }, + {0x0F007070 ,0x00005000 }, + {0x0F007074 ,0x00000000 }, + {0x0F007078 ,0x00000000 }, + {0x0F00707C ,0x00000000 }, + {0x0F007080 ,0x00000000 }, + {0x0F007084 ,0x00000000 }, + {0x0F00708C ,0x00000101 }, + {0x0F007090 ,0x00000000 }, + {0x0F007094 ,0x00010000 }, + {0x0F007098 ,0x00000000 }, + {0x0F0070C8 ,0x00000104 }, + {0x0F00A000 ,0x00000016 },/* Enable 2 Ports w/in X-Bar */ + {0x0F007018 ,0x01010000 }/* Enable Start Bit w/in Memcontroller */ }; - -#define T3LPB_SKIP_CLOCK_PROGRAM_DUMP_80MHZ 7 //index for 0x0F007000 -static struct bcm_ddr_setting asT3LPB_DDRSetting80MHz[]= {// # DPLL Clock Setting - {0x0f000820 ,0x07F13FFF }, - {0x0f000810 ,0x00002F95 }, - {0x0f000860 ,0x00000000 }, - {0x0f000880 ,0x000003DD }, - {0x0f000840 ,0x0FFF1F00 }, - {0x0F00a044 ,0x1fffffff }, - {0x0F00a040 ,0x1f000000 }, - {0x0f003050 ,0x00000021 },//flash/eeprom clock divisor which set the flash clock to 20 MHz - {0x0F00a084 ,0x1Cffffff },// dump from here in internal memory - {0x0F00a080 ,0x1C000000 }, - {0x0F00A000 ,0x00000016 }, - {0x0f007000 ,0x00010001 }, - {0x0f007004 ,0x01000000 }, - {0x0f007008 ,0x01000001 }, - {0x0f00700c ,0x00000000 }, - {0x0f007010 ,0x01000000 }, - {0x0f007014 ,0x01000100 }, - {0x0f007018 ,0x01000000 }, - {0x0f00701c ,0x01020000 }, - {0x0f007020 ,0x04020107 }, - {0x0f007024 ,0x00000007 }, - {0x0f007028 ,0x02020200 }, - {0x0f00702c ,0x0204040a }, - {0x0f007030 ,0x04000000 }, - {0x0f007034 ,0x00000002 }, - {0x0f007038 ,0x1d060200 }, - {0x0f00703c ,0x1c22221d }, - {0x0f007040 ,0x8A116600 }, - {0x0f007044 ,0x222d0800 }, - {0x0f007048 ,0x02690204 }, - {0x0f00704c ,0x00000000 }, - {0x0f007050 ,0x0100001c }, - {0x0f007054 ,0x00000000 }, - {0x0f007058 ,0x00000000 }, - {0x0f00705c ,0x00000000 }, - {0x0f007060 ,0x000A15D6 }, - {0x0f007064 ,0x0000000A }, - {0x0f007068 ,0x00000000 }, - {0x0f00706c ,0x00000001 }, - {0x0f007070 ,0x00004000 }, - {0x0f007074 ,0x00000000 }, - {0x0f007078 ,0x00000000 }, - {0x0f00707c ,0x00000000 }, - {0x0f007080 ,0x00000000 }, - {0x0f007084 ,0x00000000 }, - {0x0f007088 ,0x01000001 }, - {0x0f00708c ,0x00000101 }, - {0x0f007090 ,0x00000000 }, - {0x0f007094 ,0x00010000 }, - {0x0f007098 ,0x00000000 }, - {0x0F0070C8 ,0x00000104 }, - {0x0F007018 ,0x01010000 } +/* 80MHz-T3LP */ +#define T3LP_SKIP_CLOCK_PROGRAM_DUMP_80MHZ 9/* index for 0x0F007000 */ +static struct bcm_ddr_setting asT3LP_DDRSetting80MHZ[] = {/* DPLL Clock Setting */ + {0x0F000820 ,0x07F13FFF }, + {0x0F000810 ,0x00002F95 }, + {0x0F000860 ,0x00000000 }, + {0x0F000880 ,0x000003DD }, + {0x0F000840 ,0x0FFF1F00 }, + {0x0F00A044 ,0x1FFFFFFF }, + {0x0F00A040 ,0x1F000000 }, + {0x0F00A080 ,0x1C000000 }, + {0x0F00A084 ,0x1CFFFFFF }, + {0x0F00A000 ,0x00000016 }, + {0x0F007000 ,0x00010001 },/* Memcontroller Default Values */ + {0x0F007004 ,0x01000000 }, + {0x0F007008 ,0x01000001 }, + {0x0F00700C ,0x00000000 }, + {0x0F007010 ,0x01000000 }, + {0x0F007014 ,0x01000100 }, + {0x0F007018 ,0x01000000 }, + {0x0F00701C ,0x01020000 }, + {0x0F007020 ,0x04020107 }, + {0x0F007024 ,0x00000007 }, + {0x0F007028 ,0x02020200 }, + {0x0F00702C ,0x0204040A }, + {0x0F007030 ,0x04000000 }, + {0x0F007034 ,0x00000002 }, + {0x0F007038 ,0x1D060200 }, + {0x0F00703C ,0x1C22221D }, + {0x0F007040 ,0x8A116600 }, + {0x0F007044 ,0x222D0800 }, + {0x0F007048 ,0x02690204 }, + {0x0F00704C ,0x00000000 }, + {0x0F007050 ,0x0100001C }, + {0x0F007054 ,0x00000000 }, + {0x0F007058 ,0x00000000 }, + {0x0F00705C ,0x00000000 }, + {0x0F007060 ,0x000A15D6 }, + {0x0F007064 ,0x0000000A }, + {0x0F007068 ,0x00000000 }, + {0x0F00706C ,0x00000001 }, + {0x0F007070 ,0x00004000 }, + {0x0F007074 ,0x00000000 }, + {0x0F007078 ,0x00000000 }, + {0x0F00707C ,0x00000000 }, + {0x0F007080 ,0x00000000 }, + {0x0f007084 ,0x00000000 }, + {0x0F007088 ,0x01000001 }, + {0x0F00708C ,0x00000101 }, + {0x0F007090 ,0x00000000 }, + {0x0F007094 ,0x00010000 }, + {0x0F007098 ,0x00000000 }, + {0x0F0070C8 ,0x00000104 }, + {0x0F007018 ,0x01010000 }/* Enable Start Bit w/in Memcontroller */ +}; +/* 160MHz-T3LPB (UMA-B) */ +#define T3LPB_SKIP_CLOCK_PROGRAM_DUMP_160MHZ 7/* index for 0x0F007000 */ +static struct bcm_ddr_setting asT3LPB_DDRSettings160MHZ[] = {/* DPLL Clock Setting */ + {0x0F000820 ,0x03F137DB }, + {0x0F000810 ,0x01842795 }, + {0x0F000860 ,0x00000000 }, + {0x0F000880 ,0x000003DD }, + {0x0F000840 ,0x0FFF0400 }, + {0x0F00A044 ,0x1FFFFFFF }, + {0x0F00A040 ,0x1F000000 }, + {0x0F003050 ,0x00000021 },/* Flash/EEPROM Clock Div / setting Flash Clock to 20MHz */ + {0x0F00A084 ,0x1CFFFFFF },/* Dumping from Internal Memory */ + {0x0F00A080 ,0x1C000000 }, + {0x0F00A000 ,0x00000016 }, + {0x0F007000 ,0x00010001 },/* Memcontroller Default Values */ + {0x0F007004 ,0x01000001 }, + {0x0F007008 ,0x01000101 }, + {0x0F00700C ,0x00000000 }, + {0x0F007010 ,0x01000101 }, + {0x0F007014 ,0x01000101 }, + {0x0F007018 ,0x01000000 }, + {0x0F00701C ,0x01020000 }, + {0x0F007020 ,0x04030107 }, + {0x0F007024 ,0x02000007 }, + {0x0F007028 ,0x02020200 }, + {0x0F00702C ,0x0206060A }, + {0x0F007030 ,0x050D0D00 }, + {0x0F007034 ,0x00000003 }, + {0x0F007038 ,0x170A0200 }, + {0x0F00703C ,0x02101012 }, + {0x0F007040 ,0x45161200 }, + {0x0F007044 ,0x11250C00 }, + {0x0F007048 ,0x04DA0307 }, + {0x0F00704C ,0x00000000 }, + {0x0F007050 ,0x0000001C }, + {0x0F007054 ,0x00000000 }, + {0x0F007058 ,0x00000000 }, + {0x0F00705C ,0x00000000 }, + {0x0F007060 ,0x00142BB6 }, + {0x0F007064 ,0x20430014 }, + {0x0F007068 ,0x00000000 }, + {0x0F00706C ,0x00000001 }, + {0x0F007070 ,0x00009000 }, + {0x0F007074 ,0x00000000 }, + {0x0F007078 ,0x00000000 }, + {0x0F00707C ,0x00000000 }, + {0x0F007080 ,0x00000000 }, + {0x0F007084 ,0x00000000 }, + {0x0F007088 ,0x01000001 }, + {0x0F00708C ,0x00000101 }, + {0x0F007090 ,0x00000000 }, + {0x0F007094 ,0x00040000 }, + {0x0F007098 ,0x00000000 }, + {0x0F0070C8 ,0x00000104 }, + {0x0F007018 ,0x01010000 }/* Enable Start Bit w/in Memcontroller */ +}; +/* 133MHz-T3LPB(UMA_B) */ +#define T3LPB_SKIP_CLOCK_PROGRAM_DUMP_133MHZ 7/* index for 0x0F007000 */ +static struct bcm_ddr_setting asT3LPB_DDRSetting133MHZ[] = {/* DPLL Clock Setting */ + {0x0F000820 ,0x03F1356B }, + {0x0F000810 ,0x00002F95 }, + {0x0F000880 ,0x000003DD }, + {0x0F000840 ,0x0FFF0000 }, + {0x0F000860 ,0x00000000 }, + {0x0F00A044 ,0x1FFFFFFF }, + {0x0F00A040 ,0x1F000000 }, + {0x0F003050 ,0x00000021 },/* Flash/EEPROM Clock Div / Setting Flash Clock to 20MHz */ + {0x0F00A084 ,0x1CFFFFFF },/* Dumping from Internal Memory */ + {0x0F00A080 ,0x1C000000 }, + {0x0F00A000 ,0x00000016 }, + {0x0F007000 ,0x00010001 },/* Memcontroller Default Values */ + {0x0F007004 ,0x01010100 }, + {0x0F007008 ,0x01000001 }, + {0x0F00700C ,0x00000000 }, + {0x0F007010 ,0x01000000 }, + {0x0F007014 ,0x01000100 }, + {0x0F007018 ,0x01000000 }, + {0x0F00701C ,0x01020001 },/* POP 0x00020001, Normal 0x01020001 */ + {0x0F007020 ,0x04030107 },/* POP 0x05030107, Normal 0x04030107 */ + {0x0F007024 ,0x02000007 }, + {0x0F007028 ,0x02020200 }, + {0x0F00702C ,0x0206060A },/* ROB 0x0205050A,0x0206060A */ + {0x0F007030 ,0x05000000 }, + {0x0F007034 ,0x00000003 }, + {0x0F007038 ,0x190A0200 },/* ROB 0x110A0200,0x180A0200,0x1F0A0200 */ + {0x0F00703C ,0x02101017 },/* ROB 0x02101010,0x02101018 */ + {0x0F007040 ,0x45171200 },/* ROB 0x45751200,0x450F1200 */ + {0x0F007044 ,0x11290D00 },/* ROB 0x110A0D00,0x111F0D00 */ + {0x0F007048 ,0x04080306 }, + {0x0F00704C ,0x00000000 }, + {0x0F007050 ,0x0100001C }, + {0x0F007054 ,0x00000000 }, + {0x0F007058 ,0x00000000 }, + {0x0F00705C ,0x00000000 }, + {0x0F007060 ,0x0010245F }, + {0x0F007064 ,0x00000010 }, + {0x0F007068 ,0x00000000 }, + {0x0F00706C ,0x00000001 }, + {0x0F007070 ,0x00007000 }, + {0x0F007074 ,0x00000000 }, + {0x0F007078 ,0x00000000 }, + {0x0F00707C ,0x00000000 }, + {0x0F007080 ,0x00000000 }, + {0x0F007084 ,0x00000000 }, + {0x0F007088 ,0x01000001 }, + {0x0F00708C ,0x00000101 }, + {0x0F007090 ,0x00000000 }, + {0x0F007094 ,0x00004000 },/* Enable BW Improvement w/in Memcontroller */ + {0x0F007098 ,0x00000000 }, + {0x0F0070C8 ,0x00000104 },/* Enable 2 Ports w/in X-Bar */ + {0x0F007018 ,0x01010000 }/* Enable Start Bit w/in Memcontroller */ +}; +/* 100MHz-T3LPB(UMA_B) */ +#define T3LPB_SKIP_CLOCK_PROGRAM_DUMP_100MHZ 8/* index for 0x0F007000 */ +static struct bcm_ddr_setting asT3LPB_DDRSetting100MHZ[] = {/* DPLL Clock Settings */ + {0x0F000810 ,0x00002F95 }, + {0x0F000820 ,0x03F1369B }, + {0x0F000840 ,0x0FFF0000 }, + {0x0F000860 ,0x00000000 }, + {0x0F000880 ,0x000003DD }, + {0x0F00A044 ,0x1FFFFFFF }, + {0x0F00A040 ,0x1F000000 }, + {0x0F003050 ,0x00000021 }, + {0x0F00A084 ,0x1CFFFFFF }, + {0x0F00A080 ,0x1C000000 }, + {0x0F007000 ,0x00010001 }, + {0x0F007004 ,0x01010100 }, + {0x0F007008 ,0x01000001 }, + {0x0F00700C ,0x00000000 }, + {0x0F007010 ,0x01000000 }, + {0x0F007014 ,0x01000100 }, + {0x0F007018 ,0x01000000 }, + {0x0F00701C ,0x01020000 }, + {0x0F007020 ,0x04020107 }, + {0x0F007024 ,0x00000007 }, + {0x0F007028 ,0x01020200 }, + {0x0F00702C ,0x0204040A }, + {0x0F007030 ,0x06000000 }, + {0x0F007034 ,0x00000004 }, + {0x0F007038 ,0x1F080200 }, + {0x0F00703C ,0x0203021F }, + {0x0F007040 ,0x6E001200 }, + {0x0F007044 ,0x011A0A00 }, + {0x0F007048 ,0x03000305 }, + {0x0F00704C ,0x00000000 }, + {0x0F007050 ,0x0100001C }, + {0x0F007054 ,0x00000000 }, + {0x0F007058 ,0x00000000 }, + {0x0F00705C ,0x00000000 }, + {0x0F007060 ,0x00082ED6 }, + {0x0F007064 ,0x0000000A }, + {0x0F007068 ,0x00000000 }, + {0x0F00706C ,0x00000001 }, + {0x0F007070 ,0x00005000 }, + {0x0F007074 ,0x00000000 }, + {0x0F007078 ,0x00000000 }, + {0x0F00707C ,0x00000000 }, + {0x0F007080 ,0x00000000 }, + {0x0F007084 ,0x00000000 }, + {0x0F007088 ,0x01000001 }, + {0x0F00708C ,0x00000101 }, + {0x0F007090 ,0x00000000 }, + {0x0F007094 ,0x00010000 }, + {0x0F007098 ,0x00000000 }, + {0x0F0070C8 ,0x00000104 }, + {0x0F00A000 ,0000000016 }, + {0x0F007018 ,0x01010000 } +}; +/* 80MHz-T3LPB(UMA_B) */ +#define T3LPB_SKIP_CLOCK_PROGRAM_DUMP_80MHZ 7/* index for 0x0F007000 */ +static struct bcm_ddr_setting asT3LPB_DDRSetting80MHZ[] = {/* DPLL Clock Settings */ + {0x0F000810 ,0x00002F95 }, + {0x00F00820 ,0x03F1269B }, + {0x0F000840 ,0x0FFF0000 }, + {0x0F000860 ,0x00000000 }, + {0x0F000880 ,0x000003DD }, + {0x0F00A044 ,0x1FFFFFFF },/* Changed Source for X-bar and MIPS clock to APLL */ + {0x0F00A040 ,0x1F000000 }, + {0x0F003050 ,0x00000021 },/* Flash/EEPROM Clock Div / Setting Flash Clock to 20MHz */ + {0x0F00A084 ,0x1CFFFFFF },/* Dumping from here in Internal Memory */ + {0x0F00A080 ,0x1C000000 }, + {0x0F00A000 ,0x00000016 }, + {0x0F007000 ,0x00010001 },/* Memcontroller Default Values */ + {0x0F007004 ,0x01000000 }, + {0x0F007008 ,0x01000001 }, + {0x0F00700C ,0x00000000 }, + {0x0F007010 ,0x01000000 }, + {0x0F007014 ,0x01000100 }, + {0x0F007018 ,0x01000000 }, + {0x0F00701C ,0x01020000 }, + {0x0F007020 ,0x04020107 }, + {0x0F007024 ,0x00000007 }, + {0x0F007028 ,0x02020200 }, + {0x0F00702C ,0x0204040A }, + {0x0F007030 ,0x04000000 }, + {0x0F007034 ,0x00000002 }, + {0x0F007038 ,0x1D060200 }, + {0x0F00703C ,0x1C22221D }, + {0x0F007040 ,0x8A116600 }, + {0x0F007044 ,0x222D0800 }, + {0X0F007048 ,0x02690204 }, + {0x0F00704C ,0x00000000 }, + {0x0F007050 ,0x0100001C }, + {0x0F007054 ,0x00000000 }, + {0x0F007058 ,0x00000000 }, + {0x0F00705C ,0x00000000 }, + {0x0F007060 ,0x000A15D6 }, + {0x0F007064 ,0x0000000A }, + {0x0F007068 ,0x00000000 }, + {0x0F00706C ,0x00000001 }, + {0x0F007070 ,0x00004000 }, + {0x0F007074 ,0x00000000 }, + {0x0F007078 ,0x00000000 }, + {0x0F00707C ,0x00000000 }, + {0x0F007080 ,0x00000000 }, + {0x0F007084 ,0x00000000 }, + {0x0F007088 ,0x01000001 }, + {0x0F00708C ,0x00000101 }, + {0x0F007090 ,0x00000000 }, + {0x0F007094 ,0x00010000 }, + {0x0F007098 ,0x00000000 }, + {0x0F0070C8 ,0x00000104 }, + {0x0F007018 ,0x01010000 } }; -int ddr_init (struct bcm_mini_adapter *Adapter) { -struct bcm_ddr_setting *psDDRSetting=NULL ; -ULONG RegCount=0 ; +struct bcm_ddr_setting *psDDRSetting =NULL ; +ULONG RegCount =0 ;UINT value =0 ; -UINT uiResetValue =0 ; +UINT uiResetValue =0 ;UINT uiClockSetting =0 ;int retval =STATUS_SUCCESS ; -switch (Adapter->chip_id) - { -case 0xbece3200 : -switch (Adapter->DDRSetting) - { -case DDR_80_MHZ : - psDDRSetting=asT3LP_DDRSetting80MHz; - RegCount=(sizeof (asT3LP_DDRSetting80MHz)/ -sizeof (struct bcm_ddr_setting )); -break ; -case DDR_100_MHZ : - psDDRSetting=asT3LP_DDRSetting100MHz; - RegCount=(sizeof (asT3LP_DDRSetting100MHz)/ -sizeof (struct bcm_ddr_setting )); -break ; -case DDR_133_MHZ : - psDDRSetting=asT3LP_DDRSetting133MHz; - RegCount=(sizeof (asT3LP_DDRSetting133MHz)/ -sizeof (struct bcm_ddr_setting )); -if (Adapter->bMipsConfig ==MIPS_200_MHZ ) - { +switch (Adapter->chip_id) { +case 0xBECE3200 : +switch (Adapter->DDRSetting) { +case DDR_80_MHZ : + psDDRSeting = asT3LP_DDRSetting80MHZ; + RegCount = (sizeof (asT3LP_DDRSettings80MHZ)/ +sizeof (struct bcm_ddr_setting )); +break ; +case DDR_100_MHZ : + psDDRSetting = asT3LP_DDRSetting100MHZ; + RegCount = (sizeof (asT3LP_DDRSetting100MHZ)/ +sizeof (struct bcm_ddr_setting )); +break ; +case DDR_133_MHZ : + psDDRSetting = asT3LP_DDRSetting133MHZ; + RegCount = (sizeof (asT3LP_DDRSetting133MHZ)/ +sizeof (struct bcm_ddr_setting )); +if (Adapter->bMipsConfig ==MIPS_200_MHZ ) uiClockSetting =0x03F13652 ; - }else - { uiClockSetting =0x03F1365B ; - } -break ; -default : -return -EINVAL ; - } - +break ; +default : +return -EINVAL ; + }break ;case T3LPB :case BCS220_2 :case BCS220_2BC :case BCS250_BC : -case BCS220_3 : -/* Set bit 2 and bit 6 to 1 for BBIC 2mA drive -* (please check current value and additionally set these bits) -*/ -if ( (Adapter->chip_id !=BCS220_2 ) && - (Adapter->chip_id !=BCS220_2BC ) && - (Adapter->chip_id !=BCS220_3 ) ) - { - retval=rdmalt (Adapter,(UINT )0x0f000830 , &uiResetValue,sizeof (uiResetValue)); -if (retval <0 ) { -BCM_DEBUG_PRINT (Adapter,CMHOST ,RDM ,DBG_LVL_ALL ,"%s:%d RDM failed\n" , __func__, __LINE__); +case BCS220_3 : +/* Set bit 2 and bit 6 to 1 for BBIC 2mA drive +* (please check current value and additonally set these bits +*/ +if ((Adapter->chip_id !=BCS220_2 ) && + (Adapter->chip_id !=BCS220_2BC ) && + (Adapter->chip_id !=BCS220_3 )) { + retval =rdmalt (Adapter, (UINT )0x0f000830 , &uiResetValue,sizeof (uiResetValue)); +if (retval <0 ) { +BCM_DEBUG_PRINT (Adapter,CMHOST ,RDM ,DBG_LVL_ALL , +"%s:%d RDM failed\n" , __func__, __LINE__);return retval; } uiResetValue |=0x44 ; - retval =wrmalt (Adapter,(UINT )0x0f000830 , &uiResetValue,sizeof (uiResetValue)); -if (retval <0 ) { -BCM_DEBUG_PRINT (Adapter,CMHOST ,RDM ,DBG_LVL_ALL ,"%s:%d RDM failed\n" , __func__, __LINE__); + retval =wrmalt (Adapter, (UINT )0x0f000830 , &uiResetValue,sizeof (uiResetValue)); +if (retval <0 ) { +BCM_DEBUG_PRINT (Adapter,CMHOST ,RDM ,DBG_LVL_ALL , +"%s:%d RDM failed\n" , __func__, __LINE__);return retval; } } -switch (Adapter->DDRSetting) - { - - - -case DDR_80_MHZ : - psDDRSetting = asT3LPB_DDRSetting80MHz; - RegCount=(sizeof (asT3B_DDRSetting80MHz)/ -sizeof (struct bcm_ddr_setting )); +switch (Adapter->DDRSetting) { +case DDR_80_MHZ : + psDDRSetting = asT3LPB_DDRSetting80MGZ; + RegCount = (sizeof (asT3B_DDRsetting80MHZ)/ +sizeof (struct bcm_ddr_setting ));break ; -case DDR_100_MHZ : - psDDRSetting=asT3LPB_DDRSetting100MHz; - RegCount=(sizeof (asT3B_DDRSetting100MHz)/ -sizeof (struct bcm_ddr_setting )); +case DDR_100_MHZ : + psDDRsetting = asT3LB_DDRSetting100MHZ; + RegCount = (sizeof (asT3B_DDRSetting100MHZ)/ +sizeof (struct bcm_ddr_setting ));break ; -case DDR_133_MHZ : - psDDRSetting = asT3LPB_DDRSetting133MHz; - RegCount=(sizeof (asT3B_DDRSetting133MHz)/ -sizeof (struct bcm_ddr_setting )); - -if (Adapter->bMipsConfig ==MIPS_200_MHZ ) - { +case DDR_133_MHZ : + psDDRSetting = asT3LPB_DDRSetting133MHZ; + RegCount = (sizeof (asT3B_DDRSetting133MHZ)/ +sizeof (struct bcm_ddr_setting )); +if (Adapter->bMipsConfig ==MIPS_200_MHZ ) uiClockSetting =0x03F13652 ; - }else - { uiClockSetting =0x03F1365B ; - }break ; - -case DDR_160_MHZ : - psDDRSetting = asT3LPB_DDRSetting160MHz; - RegCount =sizeof (asT3LPB_DDRSetting160MHz)/sizeof (struct bcm_ddr_setting ); - -if (Adapter->bMipsConfig ==MIPS_200_MHZ ) - { +case DDR_160_MHZ : + psDDRSetting = asT3LPB_DDRSetting160MHZ; + RegCount = (sizeof (asT3LPB_DDRSetting160MHZ)/ +sizeof (struct bcm_ddr_setting )); +if (Adapter->bMipsConfig ==MIPS_200_MHZ ) uiClockSetting =0x03F137D2 ; - }else - { uiClockSetting =0x03F137DB ; - } - }break ; - -case 0xbece0110 : -case 0xbece0120 : -case 0xbece0121 : -case 0xbece0130 : -case 0xbece0300 : -BCM_DEBUG_PRINT (Adapter,DBG_TYPE_INITEXIT ,DRV_ENTRY ,DBG_LVL_ALL ,"DDR Setting: %x\n" , Adapter->DDRSetting); -switch (Adapter->DDRSetting) - { -case DDR_80_MHZ : - psDDRSetting = asT3_DDRSetting80MHz; - RegCount = (sizeof (asT3_DDRSetting80MHz)/ -sizeof (struct bcm_ddr_setting )); -break ; -case DDR_100_MHZ : - psDDRSetting = asT3_DDRSetting100MHz; - RegCount = (sizeof (asT3_DDRSetting100MHz)/ -sizeof (struct bcm_ddr_setting )); -break ; -case DDR_133_MHZ : - psDDRSetting = asT3_DDRSetting133MHz; - RegCount = (sizeof (asT3_DDRSetting133MHz)/ -sizeof (struct bcm_ddr_setting )); -break ; -default : -return -EINVAL ; - } -case 0xbece0310 : - { -switch (Adapter->DDRSetting) - { -case DDR_80_MHZ : - psDDRSetting = asT3B_DDRSetting80MHz; - RegCount=(sizeof (asT3B_DDRSetting80MHz)/ -sizeof (struct bcm_ddr_setting )); -break ; -case DDR_100_MHZ : - psDDRSetting=asT3B_DDRSetting100MHz; - RegCount=(sizeof (asT3B_DDRSetting100MHz)/ -sizeof (struct bcm_ddr_setting )); +default : +return -EINVAL ; + } +break ; +case 0xBECE0110 : +case 0xBECE0120 : +case 0xBECE0121 : +case 0xBECE0130 : +case 0xBECE0300 : +BCM_DEBUG_PRINT (Adapter,DBG_TYPE_INITEXIT ,DRV_ENTRY , +DBG_LVL_ALL ,"DDR Setting: %x\n" , Adapter->DDRSetting); +switch (Adapter->DDRSetting) { +case DDR_80_MHZ : + psDDRSetting = asT3_DDRSeting80MHZ; + RegCount = (sizeof (asT3_DDRSettings80MHZ)/ +sizeof (struct bcm_ddr_setting ));break ; -case DDR_133_MHZ : - -if (Adapter->bDPLLConfig ==PLL_266_MHZ )//266Mhz PLL selected. - { -memcpy (asT3B_DDRSetting133MHz, asDPLL_266MHZ, -sizeof (asDPLL_266MHZ)); - psDDRSetting = asT3B_DDRSetting133MHz; - RegCount=(sizeof (asT3B_DDRSetting133MHz)/ -sizeof (struct bcm_ddr_setting )); - } -else - { - psDDRSetting = asT3B_DDRSetting133MHz; - RegCount=(sizeof (asT3B_DDRSetting133MHz)/ -sizeof (struct bcm_ddr_setting )); -if (Adapter->bMipsConfig ==MIPS_200_MHZ ) - { +case DDR_100_MHZ : + psDDRSetting = asT3_DDRSetting100MHZ; + RegCount = (sizeof (asT3_DDRSetting100MHZ)/ +sizeof (struct bcm_ddr_setting )); +break ; +case DDR_133_MHZ : + psDDRSetting = asT3_DDRSetting133MHZ; + RegCount = (sizeof (asT3_DDRSetting133MHZ)/ +sizeof (struct bcm_ddr_setting )); +break ; +default : +return -EINVAL ; + } +break ; +case 0xBECE0310 : +switch (Adapter->DDRSetting) { +case DDR_80_MHZ : + psDDRSetting = asT3B_DDRSetting80MHZ; + RegCount = (sizeof (asT3B_DDRSetting80MHZ)/ +sizeof (struct bcm_ddr_setting )); +break ; +case DDR_100_MHZ : + psDDRSetting = asT3B_DDRSetting100MHZ; + RegCount = (sizeof (asT3B_DDRSetting100MHZ)/ +sizeof (struct bcm_ddr_setting )); +break ; +case DDR_133_MHZ : +if (Adapter->bDPLLConfig ==PLL_266_MHZ ) {/* 266mhz phase locked loop selected */ +memcpy (asT3B_DDRSettings133MHZ, + asDPLL_266MHZ,sizeof (asDPLL_266MHZ)); + psDDRSetting = asT3B_DDRSetting133MHZ; + RegCount = (sizeof (asT3B_DDRSetting133MHZ)/ +sizeof (struct bcm_ddr_setting )); + }else { + psDDRSettings = asT3B_DDRSettings133MHZ; + RegCount = (sizeof (asT3B_DDRSetting133MHZ)/ +sizeof (struct bcm_ddr_setting )); +if (Adapter->bMipsConfig ==MIPS_200_MHZ ) uiClockSetting =0x07F13652 ; - }else - { uiClockSetting =0x07F1365B ; - } - } -break ; -default : -return -EINVAL ; + } +break ; +default : +return -EINVAL ; }break ; - - }default :return -EINVAL ; } - - value=0 ; -BCM_DEBUG_PRINT (Adapter,DBG_TYPE_INITEXIT ,DRV_ENTRY ,DBG_LVL_ALL ,"Register Count is =%lu\n" , RegCount); -while (RegCount && !retval) - { -if (uiClockSetting && psDDRSetting->ulRegAddress ==MIPS_CLOCK_REG ) - { + value =0 ; +BCM_DEBUG_PRINT (Adapter,DBG_TYPE_INITEXIT ,DRV_ENTRY , +DBG_LVL_ALL ,"Register Count is =%lu\n" , RegCount); +while (RegCount && !retval) { +if (uiClockSetting && psDDRSetting->ulRegAddress ==MIPS_CLOCK_REG ) value = uiClockSetting; - }else - { - value = psDDRSetting->ulRegValue; - } + value = psDDRSetting->ulRegAddress; retval =wrmalt (Adapter, psDDRSetting->ulRegAddress, &value,sizeof (value)); -if (STATUS_SUCCESS != retval) { +if (STATUS_SUCCESS != retval) {BCM_DEBUG_PRINT (Adapter,DBG_TYPE_PRINTK ,0 ,0 ,"%s:%d\n" , __func__, __LINE__);break ; }
@@ -979,116 +878,108 @@ int ddr_init(struct bcm_mini_adapter *Adapter) RegCount--; psDDRSetting++; } - -if (Adapter->chip_id >=0xbece3300 ) - { - +if (Adapter->chip_id >=0xBECE3300 ) {mdelay (3 ); -if ( (Adapter->chip_id !=BCS220_2 )&& - (Adapter->chip_id !=BCS220_2BC )&& - (Adapter->chip_id !=BCS220_3 )) - { -/* drive MDDR to half in case of UMA-B: */ - uiResetValue =0x01010001 ; +if ((Adapter->chip_id !=BCS220_2 ) && + (Adapter->chip_id !=BCS220_2BC ) && + (Adapter->chip_id !=BCS220_3 )) { + uiResetValue =0x01010001 ;/* drive MDDR to half of UMA_B */ retval =wrmalt (Adapter, (UINT )0x0F007018 , &uiResetValue,sizeof (uiResetValue)); -if (retval <0 ) { +if (retval <0 ) {BCM_DEBUG_PRINT (Adapter,CMHOST ,RDM ,DBG_LVL_ALL ,"%s:%d RDM failed\n" , __func__, __LINE__);return retval; } uiResetValue =0x00040020 ; retval =wrmalt (Adapter, (UINT )0x0F007094 , &uiResetValue,sizeof (uiResetValue)); -if (retval <0 ) { +if (retval <0 ) {BCM_DEBUG_PRINT (Adapter,CMHOST ,RDM ,DBG_LVL_ALL ,"%s:%d RDM failed\n" , __func__, __LINE__);return retval; } uiResetValue =0x01020101 ; retval =wrmalt (Adapter, (UINT )0x0F00701c , &uiResetValue,sizeof (uiResetValue)); -if (retval <0 ) { +if (retval <0 ) {BCM_DEBUG_PRINT (Adapter,CMHOST ,RDM ,DBG_LVL_ALL ,"%s:%d RDM failed\n" , __func__, __LINE__);return retval; } uiResetValue =0x01010000 ; retval =wrmalt (Adapter, (UINT )0x0F007018 , &uiResetValue,sizeof (uiResetValue)); -if (retval <0 ) { +if (retval <0 ) {BCM_DEBUG_PRINT (Adapter,CMHOST ,RDM ,DBG_LVL_ALL ,"%s:%d RDM failed\n" , __func__, __LINE__);return retval; } }mdelay (3 ); -/* DC/DC standby change... -* This is to be done only for Hybrid PMU mode. -* with the current h/w there is no way to detect this. -* and since we dont have internal PMU lets do it under UMA-B chip id. -* we will change this when we will have internal PMU. -*/ -if (Adapter->PmuMode ==HYBRID_MODE_7C ) - { - retval =rdmalt (Adapter,(UINT )0x0f000c00 , &uiResetValue,sizeof (uiResetValue)); -if (retval <0 ) { +/* DC/DC standby change... +* This is to be done only for Hybrid PMU mode. +* with the current h/w there is no way to detect this. +* and since we dont have internal PMU lets do it under UMA-B chip id. +* we will change this when we will have internal PMU. +*/ +if (Adapter->PmuMode ==HYBRID_MODE_7C ) { + retval =rdmalt (Adapter, (UINT )0x0f000c00 , &uiResetValue,sizeof (uiResetValue)); +if (retval <0 ) {BCM_DEBUG_PRINT (Adapter,CMHOST ,RDM ,DBG_LVL_ALL ,"%s:%d RDM failed\n" , __func__, __LINE__);return retval; } - retval =rdmalt (Adapter,(UINT )0x0f000c00 , &uiResetValue,sizeof (uiResetValue)); -if (retval <0 ) { + retval =rdmalt (Adapter, (UINT )0x0f000c00 , &uiResetValue,sizeof (uiResetValue)); +if (retval <0 ) {BCM_DEBUG_PRINT (Adapter,CMHOST ,RDM ,DBG_LVL_ALL ,"%s:%d RDM failed\n" , __func__, __LINE__);return retval; } uiResetValue =0x1322a8 ; retval =wrmalt (Adapter, (UINT )0x0f000d1c , &uiResetValue,sizeof (uiResetValue)); -if (retval <0 ) { +if (retval <0 ) {BCM_DEBUG_PRINT (Adapter,CMHOST ,RDM ,DBG_LVL_ALL ,"%s:%d RDM failed\n" , __func__, __LINE__);return retval; } - retval =rdmalt (Adapter,(UINT )0x0f000c00 , &uiResetValue,sizeof (uiResetValue)); -if (retval <0 ) { + retval =rdmalt (Adapter, (UINT )0x0f000c00 , &uiResetValue,sizeof (uiResetValue)); +if (retval <0 ) {BCM_DEBUG_PRINT (Adapter,DBG_TYPE_PRINTK ,RDM ,DBG_LVL_ALL ,"%s:%d RDM failed\n" , __func__, __LINE__);return retval; } - retval =rdmalt (Adapter,(UINT )0x0f000c00 , &uiResetValue,sizeof (uiResetValue)); -if (retval <0 ) { + retval =rdmalt (Adapter, (UINT )0x0f000c00 , &uiResetValue,sizeof (uiResetValue)); +if (retval <0 ) {BCM_DEBUG_PRINT (Adapter,CMHOST ,RDM ,DBG_LVL_ALL ,"%s:%d RDM failed\n" , __func__, __LINE__);return retval; } uiResetValue =0x132296 ; retval =wrmalt (Adapter, (UINT )0x0f000d14 , &uiResetValue,sizeof (uiResetValue)); -if (retval <0 ) { +if (retval <0 ) {BCM_DEBUG_PRINT (Adapter,CMHOST ,RDM ,DBG_LVL_ALL ,"%s:%d RDM failed\n" , __func__, __LINE__);return retval; } - } -else if (Adapter->PmuMode ==HYBRID_MODE_6 ) - { + }else if (Adapter->PmuMode ==HYBRID_MODE_6 ) { - retval =rdmalt (Adapter,(UINT )0x0f000c00 , &uiResetValue,sizeof (uiResetValue)); -if (retval <0 ) { + retval =rdmalt (Adapter, (UINT )0x0f000c00 , &uiResetValue,sizeof (uiResetValue)); +if (retval <0 ) {BCM_DEBUG_PRINT (Adapter,CMHOST ,RDM ,DBG_LVL_ALL ,"%s:%d RDM failed\n" , __func__, __LINE__);return retval; } - retval =rdmalt (Adapter,(UINT )0x0f000c00 , &uiResetValue,sizeof (uiResetValue)); -if (retval <0 ) { + retval =rdmalt (Adapter, (UINT )0x0f000c00 , &uiResetValue,sizeof (uiResetValue)); +if (retval <0 ) {BCM_DEBUG_PRINT (Adapter,CMHOST ,RDM ,DBG_LVL_ALL ,"%s:%d RDM failed\n" , __func__, __LINE__);return retval; } uiResetValue =0x6003229a ; retval =wrmalt (Adapter, (UINT )0x0f000d14 , &uiResetValue,sizeof (uiResetValue)); -if (retval <0 ) { +if (retval <0 ) {BCM_DEBUG_PRINT (Adapter,CMHOST ,RDM ,DBG_LVL_ALL ,"%s:%d RDM failed\n" , __func__, __LINE__);return retval; } - retval =rdmalt (Adapter,(UINT )0x0f000c00 , &uiResetValue,sizeof (uiResetValue)); -if (retval <0 ) { + retval =rdmalt (Adapter, (UINT )0x0f000c00 , &uiResetValue,sizeof (uiResetValue)); +if (retval <0 ) {BCM_DEBUG_PRINT (Adapter,CMHOST ,RDM ,DBG_LVL_ALL ,"%s:%d RDM failed\n" , __func__, __LINE__);return retval; } - retval =rdmalt (Adapter,(UINT )0x0f000c00 , &uiResetValue,sizeof (uiResetValue)); -if (retval <0 ) { + retval =rdmalt (Adapter, (UINT )0x0f000c00 , &uiResetValue,sizeof (uiResetValue)); +if (retval <0 ) {BCM_DEBUG_PRINT (Adapter,CMHOST ,RDM ,DBG_LVL_ALL ,"%s:%d RDM failed\n" , __func__, __LINE__);return retval; } uiResetValue =0x1322a8 ; retval =wrmalt (Adapter, (UINT )0x0f000d1c , &uiResetValue,sizeof (uiResetValue)); -if (retval <0 ) { +if (retval <0 ) {BCM_DEBUG_PRINT (Adapter,CMHOST ,RDM ,DBG_LVL_ALL ,"%s:%d RDM failed\n" , __func__, __LINE__);return retval; }
@@ -1098,182 +989,166 @@ int ddr_init(struct bcm_mini_adapter *Adapter) Adapter->bDDRInitDone = TRUE;return retval; } -int download_ddr_settings (struct bcm_mini_adapter *Adapter) { -struct bcm_ddr_setting *psDDRSetting=NULL ; -ULONG RegCount=0 ; +struct bcm_ddr_setting *psDDRSetting =NULL ; +ULONG RegCount =0 ;unsigned long ul_ddr_setting_load_addr =DDR_DUMP_INTERNAL_DEVICE_MEMORY ;UINT value =0 ;int retval =STATUS_SUCCESS ;bool bOverrideSelfRefresh = false; -switch (Adapter->chip_id) - { -case 0xbece3200 : -switch (Adapter->DDRSetting) - { -case DDR_80_MHZ : - psDDRSetting = asT3LP_DDRSetting80MHz; - RegCount =ARRAY_SIZE (asT3LP_DDRSetting80MHz); - RegCount -=T3LP_SKIP_CLOCK_PROGRAM_DUMP_80MHZ ; - psDDRSetting +=T3LP_SKIP_CLOCK_PROGRAM_DUMP_80MHZ ; +switch (Aapter->chip_id) { +case 0xBECE3200 : +switch (Adapter->DDRSetting) { +case DDR_80_MHZ : + psDDRSetting = asT3LP_DDRSetting80MHZ; + RegCount =ARRAY_SIZE (asT3LP_DDRSetting80MHZ); + RegCount -=T3LP_SKIP_CLOCK_PROGRAM_DUMP_80MHZ ; + psDDRSetting +=T3LP_SKIP_CLOCK_PROGRAM_DUMP_80MHZ ; +break ; +case DDR_100_MHZ : + psDDRSetting = asT3LP_DDRSetting100MHZ; + RegCount =ARRAY_SIZE (asT3LP_DDRSetting100MHZ); + RegCount -=T3LP_SKIP_CLOCK_PROGRAM_DUMP_100MHZ ; + psDDRSetting +=T3LP_SKIP_CLOCK_PROGRAM_DUMP_100MHZ ;break ; -case DDR_100_MHZ : - psDDRSetting = asT3LP_DDRSetting100MHz; - RegCount =ARRAY_SIZE (asT3LP_DDRSetting100MHz); - RegCount -=T3LP_SKIP_CLOCK_PROGRAM_DUMP_100MHZ ; - psDDRSetting +=T3LP_SKIP_CLOCK_PROGRAM_DUMP_100MHZ ; -break ; -case DDR_133_MHZ : - bOverrideSelfRefresh = TRUE; - psDDRSetting = asT3LP_DDRSetting133MHz; - RegCount =ARRAY_SIZE (asT3LP_DDRSetting133MHz); - RegCount -=T3LP_SKIP_CLOCK_PROGRAM_DUMP_133MHZ ; - psDDRSetting +=T3LP_SKIP_CLOCK_PROGRAM_DUMP_133MHZ ; -break ; -default : -return -EINVAL ; - } +case DDR_133_MHZ : + bOverrideSelfRefresh = true; + psDDRSetting = asT3LP_DDRSetting133MHZ; + RegCount =ARRAY_SIZE (asT3LP_DDRSetting133MHZ); + RegCount -=T3LP_SKIP_CLOCK_PROGRAM_DUMP_133MHZ ; + psDDRSetting +=T3LP_SKIP_CLOCK_PROGRAM_DUMP_113MHZ ; +break ; +default : +return -EINVAL ; + }break ; -case T3LPB :case BCS220_2 :case BCS220_2BC : -case BCS250_BC : -case BCS220_3 : -switch (Adapter->DDRSetting) - { -case DDR_80_MHZ : - psDDRSetting = asT3LPB_DDRSetting80MHz; - RegCount=ARRAY_SIZE (asT3LPB_DDRSetting80MHz); - RegCount -=T3LPB_SKIP_CLOCK_PROGRAM_DUMP_80MHZ ; - psDDRSetting +=T3LPB_SKIP_CLOCK_PROGRAM_DUMP_80MHZ ; +case BCS250_BC + case BCS220_3: +switch (Adapter->DDRSetting) { +case DDR_80_MHZ : + psDDRSetting = asT3LPB_DDRSetting80MHZ; + RegCount =ARRAY_SIZE (asT3LPB_DDRsetting80MHZ); + RegCount -=T3LPB_SKIP_CLOCK_PROGRAM_DUMP_80MHZ ; + psDDRSetting +=T3LPB_SKIP_CLOCK_PROGRAM_DUMP_80MHZ ;break ; -case DDR_100_MHZ : - psDDRSetting = asT3LPB_DDRSetting100MHz; - RegCount =ARRAY_SIZE (asT3LPB_DDRSetting100MHz); - RegCount -=T3LPB_SKIP_CLOCK_PROGRAM_DUMP_100MHZ ; - psDDRSetting +=T3LPB_SKIP_CLOCK_PROGRAM_DUMP_100MHZ ; -break ; -case DDR_133_MHZ : - bOverrideSelfRefresh = TRUE; - psDDRSetting = asT3LPB_DDRSetting133MHz; - RegCount =ARRAY_SIZE (asT3LPB_DDRSetting133MHz); - RegCount -=T3LPB_SKIP_CLOCK_PROGRAM_DUMP_133MHZ ; - psDDRSetting +=T3LPB_SKIP_CLOCK_PROGRAM_DUMP_133MHZ ; -break ; - -case DDR_160_MHZ : - bOverrideSelfRefresh = TRUE; - psDDRSetting = asT3LPB_DDRSetting160MHz; - RegCount =ARRAY_SIZE (asT3LPB_DDRSetting160MHz); - RegCount -=T3LPB_SKIP_CLOCK_PROGRAM_DUMP_160MHZ ; - psDDRSetting +=T3LPB_SKIP_CLOCK_PROGRAM_DUMP_160MHZ ; - -break ; -default : -return -EINVAL ; - } +case DDR_100_MHZ : + psDDRSetting = asT3LPB_DDRSetting100MHZ; + RegCount =ARRAY_SIZE (asT3LPB_DDRSetting100MHZ); + RegCount -=T3LPB_SKIP_CLOCK_PROGRAM_DUMP_100MHZ ; + psDDRSetting +=T3LPB_SKIP_CLOCK_PROGRAM_DUMP_100MHZ ; +break ; +case DDR_133_MHZ : + bOverrideSelfRefresh = true; + psDDRSetting = asT3LPB_DDRSetting133MHZ; + RegCount =ARRAY_SIZE (asT3LPB_DDRSetting133MHZ); + RegCount -=T3LPB_SKIP_CLOCK_PROGRAM_DUMP_133MHZ ; + psDDRsetting +=T3LPB_SKIP_CLOCK_PROGRAM_DUMP_133MHZ ; +break ; +case DDR_160_MHZ : + bOverrideSelfRefresh = true; + psDDRSetting = asT3LPB_DDRSetting160MHZ; + RegCount =ARRAY_SIZE (asT3LPB_DDRSetting); + RegCount -=T3LPB_SKIP_CLOCK_PROGRAM_DUMP_160MHZ ; + psDDRSetting +=T3LPB_SKIP_CLOCK_PROGRAM_DUMP_160MHZ ; +break ; +default : +return -EINVAL ; + }break ; -case 0xbece0300 : -switch (Adapter->DDRSetting) - { -case DDR_80_MHZ : - psDDRSetting = asT3_DDRSetting80MHz; - RegCount =ARRAY_SIZE (asT3_DDRSetting80MHz); - RegCount-=T3_SKIP_CLOCK_PROGRAM_DUMP_80MHZ ; - psDDRSetting +=T3_SKIP_CLOCK_PROGRAM_DUMP_80MHZ ; +case 0xBECE0300 : +switch (Adapter->DDRSetting) { +case DDR_80_MHZ : + psDDRSetting = asT3_DDRSetting80MHZ; + RegCount =ARRAY_SIZE (asT3_DDRSetting80MHZ); + RegCount -= T3_SKIP_CLOCK_PROGRAM_DUMP_80MHZ + psDDRSetting +=T3_SKIP_CLOCK_PROGRAM_DUMP_80MHZ ;break ; -case DDR_100_MHZ : - psDDRSetting = asT3_DDRSetting100MHz; - RegCount =ARRAY_SIZE (asT3_DDRSetting100MHz); - RegCount-=T3_SKIP_CLOCK_PROGRAM_DUMP_100MHZ ; - psDDRSetting +=T3_SKIP_CLOCK_PROGRAM_DUMP_100MHZ ; -break ; -case DDR_133_MHZ : - psDDRSetting = asT3_DDRSetting133MHz; - RegCount =ARRAY_SIZE (asT3_DDRSetting133MHz); - RegCount-=T3_SKIP_CLOCK_PROGRAM_DUMP_133MHZ ; - psDDRSetting +=T3_SKIP_CLOCK_PROGRAM_DUMP_133MHZ ; -break ; -default : -return -EINVAL ; - } -break ; -case 0xbece0310 : - { -switch (Adapter->DDRSetting) - { -case DDR_80_MHZ : - psDDRSetting = asT3B_DDRSetting80MHz; - RegCount =ARRAY_SIZE (asT3B_DDRSetting80MHz); - RegCount -=T3B_SKIP_CLOCK_PROGRAM_DUMP_80MHZ ; - psDDRSetting +=T3B_SKIP_CLOCK_PROGRAM_DUMP_80MHZ ; -break ; -case DDR_100_MHZ : - psDDRSetting = asT3B_DDRSetting100MHz; - RegCount =ARRAY_SIZE (asT3B_DDRSetting100MHz); - RegCount -=T3B_SKIP_CLOCK_PROGRAM_DUMP_100MHZ ; - psDDRSetting +=T3B_SKIP_CLOCK_PROGRAM_DUMP_100MHZ ; -break ; -case DDR_133_MHZ : - bOverrideSelfRefresh = TRUE; - psDDRSetting = asT3B_DDRSetting133MHz; - RegCount =ARRAY_SIZE (asT3B_DDRSetting133MHz); - RegCount -=T3B_SKIP_CLOCK_PROGRAM_DUMP_133MHZ ; - psDDRSetting +=T3B_SKIP_CLOCK_PROGRAM_DUMP_133MHZ ; -break ; - } -break ; - } +case DDR_100_MHZ : + psDDRSetting = asT3_DDRSetting; + RegCount =ARRAY_SIZE (asT3_DDRSetting100MHZ); + RegCount -=T3_SKIP_CLOCK_PROGRAM_DUMP_100MHZ ; + psDDRSetting +=T3_SKIP_CLOCK_PROGRAM_DUMP_100MHZ ; +break ; +case DDR_133_MHZ : + psDDRSetting = asT3_DDRSetting133MHZ; + RegCount =ARRAY_SIZE (asT3_DDRSetting133MHZ); + RegCount -=T3_SKIP_CLOCK_PROGRAM_DUMP_133MHZ ; + psDDRSetting +=T3_SKIP_CLOCK_PROGRAM_DUMP_133MHZ ; +break ; +default : +return -EINVAL ; + } +break ; +case 0xBECE0310 : +switch (Adapter->DDRSetting) { +case DDR_80_MHZ : + psDDRSetting = asT3B_DDRSetting80MHZ; + RegCount =ARRAY_SIZE (asT3B_DDRSetting80MHZ); + RegCount -=T3B_SKIP_CLOCK_PROGRAM_DUMP_80MHZ ; + psDDRSetting +=T3B_SKIP_CLOCK_PROGRAM_DUMP_80MHZ ; +break ; +case DDR_100_MHZ : + psDDRSetting = asT3B_DDRSetting100MHZ; + RegCount =ARRAY_SIZE (asT3B_DDRSetting100MHZ); + RegCount -=T3B_SKIP_CLOCK_PROGRAM_DUMP_100MHZ ; + psDDRSetting +=T3B_SKIP_CLOCK_PROGRAM_DUMP_100MHZ ; +break ; +case DDR_133_MHZ : + bOverrideSelfRefresh = true; + psDDRSetting = asT3B_DDRSetting133MHZ; + RegCount =ARRAY_SIZE (asT3B_DDRSetting133MHZ); + RegCount -=T3B_SKIP_CLOCK_PROGRAM_DUMP_133MHZ ; + psDDRSetting +=T3B_SKIP_CLOCK_PROGRAM_DUMP_133MHZ ; +break ; +default : +return -EINVAL ; + } +break ;default :return -EINVAL ; } -//total number of Register that has to be dumped - value =RegCount ; +/* total number of Register that has to be dumped */ + value = RegCount; retval =wrmalt (Adapter, ul_ddr_setting_load_addr, &value,sizeof (value)); -if (retval) - { +if (retval) {BCM_DEBUG_PRINT (Adapter,DBG_TYPE_PRINTK ,0 ,0 ,"%s:%d\n" , __func__, __LINE__);return retval; } ul_ddr_setting_load_addr +=sizeof (ULONG );/*signature */ - value =(0x1d1e0dd0 ); + value = (0x1d1e0dd0 ); retval =wrmalt (Adapter, ul_ddr_setting_load_addr, &value,sizeof (value)); -if (retval) - { +if (retval) {BCM_DEBUG_PRINT (Adapter,DBG_TYPE_PRINTK ,0 ,0 ,"%s:%d\n" , __func__, __LINE__);return retval; } ul_ddr_setting_load_addr +=sizeof (ULONG ); - RegCount*=(sizeof (struct bcm_ddr_setting )/sizeof (ULONG )); + RegCount *= (sizeof (struct bcm_ddr_setting )/sizeof (ULONG )); -while (RegCount && !retval) - { - value = psDDRSetting->ulRegAddress ; - retval =wrmalt ( Adapter, ul_ddr_setting_load_addr, &value,sizeof (value)); +while (RegCount && !retval) { + value = psDDRSetting->ulRegAddress; + retval =wrmalt (Adapter, ul_ddr_setting_load_addr, &value,sizeof (value)); ul_ddr_setting_load_addr +=sizeof (ULONG ); -if (!retval) - { -if (bOverrideSelfRefresh && (psDDRSetting->ulRegAddress ==0x0F007018 )) - { - value = (psDDRSetting->ulRegValue |(1 <<8 )); -if (STATUS_SUCCESS !=wrmalt (Adapter, ul_ddr_setting_load_addr, - &value,sizeof (value))){ +if (!retval) { +if (bOverrideSelfRefresh && (psDDRSetting->ulRegAddress ==0x0F007018 )) { + value = (psDDRSetting->ulRegValue | (1 <<8 )); +if (STATUS_SUCCESS !=wrmalt (Adapter, ul_ddr_setting_load_addr, + &value,sizeof (value))) {BCM_DEBUG_PRINT (Adapter,DBG_TYPE_PRINTK ,0 ,0 ,"%s:%d\n" , __func__, __LINE__);break ; } - } -else - { + }else { value = psDDRSetting->ulRegValue; -if (STATUS_SUCCESS !=wrmalt (Adapter, ul_ddr_setting_load_addr , - &value,sizeof (value))){ +if (STATUS_SUCCESS !=wrmalt (Adapter, ul_ddr_setting_load_addr , + &value,sizeof (value))) {BCM_DEBUG_PRINT (Adapter,DBG_TYPE_PRINTK ,0 ,0 ,"%s:%d\n" , __func__, __LINE__);break ; }
@@ -1285,5 +1160,3 @@ int download_ddr_settings(struct bcm_mini_adapter *Adapter) }return retval; } - -
Signature · 1 line
1.8.4
Quoted 2 lines · Gary Rookard
Fixed
non_standardkernel style.
You're doing too many things at once, it needs to be broken into a patch series which do one type of change at a time.
The changelog is useless.
drivers/staging/bcm/DDRInit.c line 1
Quoted 13 lines
Signed off by: Gary Alan Rookard <[email protected]>
--- drivers/staging/bcm/DDRInit.c | 2081 +++++++++++++++++++---------------------- 1 file changed, 977 insertions(+), 1104 deletions(-)drivers/staging/bcm/DDRInit.c +1
-2@@ -1,977 +1,876 @@ -#include "headers.h" - +/* File: DDRInit.c */
This isn't useful.
drivers/staging/bcm/DDRInit.c line 19
Quoted 4 lines
drivers/staging/bcm/DDRInit.c +4
-0+ {0x0F000840, 0x0FFF1B00}, /* Changed Source for X-bar and MIPS Clock to APLL */ + {0xF0000870, 0x00000002}, + {0x0F00A044, 0x1FFFFFFF}, + {0x0F00A040, 0x1F000000},
One of these is not like the others. You have introduced a bug with 0xF0000870 vs 0x0F000870.
regards,
dan carpenter