mei: add 9 series PCH mei device ids
Subsystems (2)
And Lynx Point H Refresh and Wildcat Point LP
device ids.
Signed-off-by Tomas Winkler <[email protected]>
--- drivers/misc/mei/hw-me-regs.h | 4 ++++ drivers/misc/mei/pci-me.c | 4 +++- 2 files changed, 7 insertions(+), 1 deletion(-)
drivers/misc/mei/hw-me-regs.h +4 -0
@@ -110,8 +110,12 @@#define MEI_DEV_ID_PPT_3 0x1DBA/* Panther Point */ #define MEI_DEV_ID_LPT 0x8C3A/* Lynx Point */ +#define MEI_DEV_ID_LPT_H 0x8C3A/* Lynx Point H */ #define MEI_DEV_ID_LPT_W 0x8D3A/* Lynx Point - Wellsburg */ #define MEI_DEV_ID_LPT_LP 0x9C3A/* Lynx Point LP */ +#define MEI_DEV_ID_LPT_HR 0x8CBA/* Lynx Point H Refresh */ + +#define MEI_DEV_ID_WPT_LP 0x9CBA/* Wildcat Point LP */ /* * MEI HW Section */
drivers/misc/mei/pci-me.c +3 -1
@@ -76,9 +76,11 @@ static DEFINE_PCI_DEVICE_TABLE(mei_me_pci_tbl) = { {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_PPT_1)}, {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_PPT_2)}, {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_PPT_3)}, - {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_LPT)}, + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_LPT_H)}, {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_LPT_W)}, {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_LPT_LP)}, + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_LPT_HR)}, + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_WPT_LP)},/* required last entry */ {0, }
Signature · 1 line
1.8.3.1
Greg KH
maintainerQuoted 14 lines · Tomas Winkler
And Lynx Point H Refresh and Wildcat Point LP
device ids.Signed-off-by Tomas Winkler <[email protected]>--- drivers/misc/mei/hw-me-regs.h | 4 ++++ drivers/misc/mei/pci-me.c | 4 +++- 2 files changed, 7 insertions(+), 1 deletion(-)drivers/misc/mei/hw-me-regs.h +0
-0
drivers/misc/mei/hw-me-regs.h line 113
Quoted 4 lines
drivers/misc/mei/hw-me-regs.h +1
-0@@ -110,8 +110,12 @@#define MEI_DEV_ID_PPT_3 0x1DBA/* Panther Point */ #define MEI_DEV_ID_LPT 0x8C3A/* Lynx Point */ +#define MEI_DEV_ID_LPT_H 0x8C3A/* Lynx Point H */
Why duplicate this #define?
And, now that you changed it, why keep the "old" one around, it's no longer used anywhere else?
thanks,
greg k-h
Quoted 8 lines
Quoted 8 lines
drivers/misc/mei/hw-me-regs.h +0
-0@@ -110,8 +110,12 @@#define MEI_DEV_ID_PPT_3 0x1DBA/* Panther Point */
Quoted 8 lines
drivers/misc/mei/hw-me-regs.h line 113
Quoted 2 lines
drivers/misc/mei/hw-me-regs.h +1
-0#define MEI_DEV_ID_LPT 0x8C3A/* Lynx Point */ +#define MEI_DEV_ID_LPT_H 0x8C3A/* Lynx Point H */ Why duplicate this #define?
And, now that you changed it, why keep the "old" one around, it's no longer used anywhere else?
The correct name is LPT_H so I've just missed to remove the line, sending V2.
Thanks
Tomas